Russian Federation
ORDER of the Ministry of Regional Development of the Russian Federation dated December 30, 2009 N 624 (as amended on May 26, 2011) "ON APPROVAL OF THE LIST OF TYPES OF WORK ON ENGINEERING SURVEYS, ON PREPARATION OF DESIGN DOCUMENTATION, ON CONSTRUCTION, RECONSTRUCTION, OVERHAUL REPAIRS CAPITAL CONSTRUCTION FACILITIES THAT INFLUENCE THE SAFETY OF CAPITAL FACILITIES CONSTRUCTION"
(as amended by Order of the Ministry of Regional Development of the Russian Federation dated June 23, 2010 N 294)
3. Recognize as invalid the Order of the Ministry of Regional Development of the Russian Federation dated December 9, 2008 N 274 “On approval of the List of types of work for engineering surveys, for the preparation of design documentation, for construction, reconstruction, major repairs of capital construction projects that affect safety capital construction projects" (registered with the Ministry of Justice of Russia on January 16, 2009 N 13086), as well as Order of the Ministry of Regional Development of the Russian Federation dated October 21, 2009 N 480 "On amendments to the Order of the Ministry of Regional Development of the Russian Federation dated December 9, 2008 . N 274 "On approval of the List of types of work on engineering surveys, on the preparation of design documentation, on construction, reconstruction, major repairs of capital facilities
I. Types of engineering survey work
4. Work as part of engineering and environmental surveys
4.5. Study of vegetation, fauna, sanitary-epidemiological and medical-biological studies of the territory<*>
II. Types of work on the preparation of project documentation
4. Work on the preparation of information on internal engineering equipment, internal networks of engineering support, on the list of engineering activities:
4.3. Work on the preparation of projects for internal power supply systems<*>
4.4. Work on preparing projects for internal low-current systems<*>
8. Work on the preparation of construction organization projects, demolition and dismantling of buildings and structures, extension of service life and conservation<*>
III. Types of construction, reconstruction and major repair work
1. Geodetic work performed on construction sites
1.1. Marking work during construction<*>
1.2. Geodetic control of the accuracy of geometric parameters of buildings and structures<*>
2. Preparatory work
2.1. Dismantling (dismantling) of buildings and structures, walls, ceilings, flights of stairs and others
structural and related elements or parts thereof<*>
2.2. Construction of temporary: roads; platforms; engineering networks and structures<*>
2.4. Installation and dismantling of inventory external and internal scaffolding, technological waste chutes<*>
3. Excavation work
3.1. Mechanized soil development<*>
3.5. Soil compaction with rollers, soil compactors or heavy rammers<*>
9. Work on the installation of stone structures
9.1. Construction of building structures and structures made of natural and artificial stones, including cladding<*>
9.2. Construction of brick structures, including those with cladding<*>
9.3. Construction of heating stoves and hearths<*>
11. Installation of wooden structures
11.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures, including glued structures<*>
11.2. Assembly of residential and public buildings from factory-produced parts<*>
12. Protection of building structures, pipelines and equipment (except for main and field pipelines)
12.3. Protective coating with paints and varnishes<*>
12.11. Pipeline thermal insulation work<*>
13. Roof installation
13.1. Installation of roofs made of piece and sheet materials<*>
13.2. Installation of roofs from roll materials<*>
13.3. Installation of self-leveling roofs<*>
14. Facade work
14.1. Surface cladding with natural and artificial stones and linear shaped stones<*>
14.2. Installation of ventilated facades<*>
15. Installation of internal engineering systems and equipment of buildings and structures
15.1. Installation and dismantling of water supply and sewerage systems<*>
15.2. Installation and dismantling of the heating system<*>
15.4. Installation and dismantling of the ventilation and air conditioning system<*>
15.5. Power supply system design<*>
15.6. Installation of electrical and other networks for controlling life support systems of buildings and structures<*>
20. Construction of external electrical networks and communication lines
(clause 20 as amended by Order of the Ministry of Regional Development of the Russian Federation dated June 23, 2010 N 294)
20.1. Construction of power supply networks with voltage up to 1 kV inclusive<*>
20.13. Installation of external communication lines, including telephone, radio and television<*>
(clause 20.13 introduced by Order of the Ministry of Regional Development of the Russian Federation dated June 23, 2010 N 294)
23. Installation work
23.5. Installation of compressor units, pumps and fans<*>
23.6. Installation of electrical installations, equipment, automation and alarm systems<*>
23.24. Installation of equipment for food industry enterprises<*>
23.27. Installation of equipment for cinematography enterprises<*>
23.28. Installation of equipment for electronics and communications industry enterprises<*>
23.29. Installation of equipment for healthcare institutions and medical industry enterprises<*>
23.30. Installation of equipment for agricultural production, including fish processing and fish storage<*>
23.31. Installation of equipment for consumer services and utilities<*>
23.33. Installation of communication facilities equipment<*>
24. Commissioning work
24.7. Commissioning of automation in power supply<*>
24.10. Commissioning of automation systems, alarm systems and interconnected devices<*>
24.11. Commissioning of autonomous systems adjustment<*>
24.12. Commissioning works for complex adjustment of systems<*>
24.13. Commissioning of telemechanics equipment<*>
24.14. Setting up ventilation and air conditioning systems<*>
24.18. Commissioning of refrigeration units<*>
24.21. Commissioning works of hot water heating boilers<*>
24.22. Commissioning of boiler and auxiliary equipment<*>
33. Work on organizing construction, reconstruction and major repairs by a legal entity or individual entrepreneur (general contractor) attracted by the developer or customer on the basis of an agreement
33.1.8. Light industry enterprises and facilities<*>
33.1.9. Food industry enterprises and facilities<*>
33.1.10. Enterprises and facilities of agriculture and forestry<*>
33.2.7. Enterprises and public transport facilities<*>
* These types and groups of types of work require obtaining a certificate of approval for types of work that affect the safety of a capital construction project, in the case of such work being performed at the facilities specified in .
letter dated June 15, 2010 No. 24099-RP/08
Explanations of the Ministry of Regional Development on Order 624
National Association of Builders
123242, Moscow, st. Malaya Gruzinskaya, 3
National Association of Designers
123610 Moscow, Krasnopresnenskaya embankment, 12, entrance 3, office 1004v, 1004a
National Association of Prospectors
129090, Moscow, Bolshoi Balkansky per., 20, building 1, 6th floor
In connection with numerous requests from self-regulatory organizations about the procedure for implementing the order of the Ministry of Regional Development of the Russian Federation dated December 30, 2009 No. 624 “On approval of the List of types of work for engineering surveys, for the preparation of design documentation, for construction, reconstruction, major repairs of capital construction projects, which have an impact on the safety of capital construction projects”, which will come into effect on July 1, 2010, we explain the following.
On July 1, 2010, the List of types of work that affect the safety of capital construction projects (hereinafter referred to as the List), approved by Order of the Ministry of Regional Development of Russia dated December 30, 2009 No. 624 “On approval of the List of types of work for engineering surveys, for the preparation of design documentation” comes into force documentation for the construction, reconstruction, and major repairs of capital construction projects that affect the safety of capital construction projects” (hereinafter referred to as Order No. 624). From this date, the List approved by the order of the Ministry of Regional Development of Russia dated December 9, 2008 No. 274 “On approval of the List of types of work that affect the safety of capital construction projects”, as well as the order of the Ministry of Regional Development of Russia dated October 21, 2009 No. 480 “On the introduction of amendments to the order of the Ministry of Regional Development of the Russian Federation dated
December 9, 2008 No. 274 “On approval of the List of types of work for engineering surveys, preparation of design documentation, construction, reconstruction, major repairs of capital construction projects that affect the safety of capital construction projects.”
In accordance with Part 9 of Article 55.8 of the Town Planning Code of the Russian Federation (hereinafter referred to as the Code), a certificate of admission to a certain type or types of work that affects the safety of capital construction projects is issued by a self-regulatory organization (hereinafter referred to as SRO) without limiting the period and territory of its validity. . Thus, the termination of the order of the Ministry of Regional Development of Russia dated December 9, 2008 No. 274 does not formally cancel the validity of the admission certificates issued in accordance with this order. Organizations and individual entrepreneurs have the right to carry out the work specified in the certificate issued on the basis of Order No. 274 of the Ministry of Regional Development of Russia dated December 9, 2008 and directly provided for by Order No. 624.
At the same time, in the implementation of Order No. 624 in the practice of public and private customers, commissions for holding competitions and auctions, organizations for conducting state examination of design documentation and engineering survey results, state construction supervision bodies, construction control organizations, law enforcement agencies and other bodies and organizations, difficulties may arise in comparing the types of work specified in the certificates issued in accordance with Order No. 274 of the Ministry of Regional Development of Russia dated December 9, 2008, and in the List approved by Order No. 624, since in the latter the types of work are formulated in most cases in a different wording .
In this regard, from July 1, 2010, in accordance with Part 2 of Article 52 of the Code, the Ministry of Regional Development of Russia recommends that persons carrying out engineering surveys, architectural and construction design, construction, reconstruction, major repairs of capital construction projects, carry out the types of work specified in the List approved Order No. 624, only after the specified types of work are included in the certificates of approval issued by the SRO.
In order to implement Order No. 624, SROs must take the following actions:
1) holding General Meetings of SRO members;
2) notification of Rostechnadzor about changes in the scope of activities of SROs and about the adoption of new requirements for the issuance of certificates of admission;
3) amendments to certificates of admission.
4) obtaining a decision from Rostechnadzor to enter information into the state register about changing the scope of activity of the SRO in order to confirm on behalf of the state the right to issue certificates of admission in accordance with Order No. 624;
1. Conducting General Meetings of SRO members
1.1. Determining the scope of activity of a self-regulatory organization.
In accordance with paragraph 10 of Article 55.10 of the Code, the exclusive competence of the general meeting of SRO members includes determining the list of types of work that affect the safety of capital construction projects and resolving issues regarding the issuance of a certificate of admission to which falls within the scope of activity of the SRO.
In accordance with Part 5 of Article 55.5 of the Code, the requirements for the issuance of certificates of admission must be determined in relation to each type of work that affects the safety of capital construction projects and the resolution of issues regarding the issuance of a certificate of admission to which is referred by the general meeting of members of the SRO to the scope of activity of the SRO , or types of such work.
In accordance with Part 5 of Article 55.8 of the Code, the SRO can issue certificates of admission to work that affect the safety of capital construction projects, in relation only to types of work, the resolution of issues regarding the issuance of a certificate of admission to which is referred by the general meeting of SRO members to the scope of activity of the SRO .
Based on the foregoing, without defining the scope of its activities, the SRO does not have the right to approve the requirements for issuing certificates and does not have the right to issue certificates for the relevant types of work. At the same time, the scope of activity of the SRO must include all or part of the types of work contained in Order No. 624.
When determining the scope of activity, self-regulatory organizations should also pay attention to the fact that Order No. 624 contains a significant number of types of construction work marked with a “*”. The specified types of work should be included in the scope of activity of the SRO if the specified work will be performed by members of the SRO in relation to particularly dangerous, technically complex and unique capital construction projects.
The legislation does not limit SROs in the right to hold General Meetings of their members on the issue of approval of new areas of activity in accordance with Order No. 624 before the date of entry into force of this order. In this case, the corresponding decision of the General Meeting must come into force no earlier than July 1, 2010 (the date of entry into force of Order No. 624).
1.2. Determination of new requirements for the issuance of certificates of admission to work specified in Order No. 624.
Taking into account the fact that Order No. 624 has changed the types of work, the General Meeting of SRO members must approve new requirements for the issuance of certificates of admission.
The SRO has the right to hold General Meetings of its members and approve new requirements for the issuance of certificates of admission in accordance with Order No. 624 until July 1, 2010 (with the postponed entry into force of the decision of the General Meeting).
It should be taken into account that the Decree of the Government of the Russian Federation dated 02/03/2010 No. 48 established increased requirements for the issuance of certificates of admission in relation to particularly dangerous, technically complex and unique objects.
In addition, Order No. 624 contains a significant number of types of construction work marked with the “*” sign, for which a certificate of admission is required only if the specified work is carried out in relation to particularly dangerous, technically complex and unique objects, as well as types of work, which in their content are applicable only to particularly dangerous, technically complex and unique objects.
Thus, if members of the SRO are expected to perform work on particularly dangerous, technically complex and unique objects, as well as on other objects, then the SRO must accordingly approve the requirements for issuing certificates for both especially dangerous, technically complex and unique objects, and for other capital construction projects.
2. Notification of Rostechnadzor about changes in the scope of activities of self-regulatory organizations and about the adoption of requirements for the issuance of certificates of admission
According to Part 14 of Article 55.5 of the Code, decisions adopted by the general meeting of members of a self-regulatory organization, no later than three days from the date of their adoption, must be sent in electronic and paper format to the supervisory authority for self-regulatory organizations (Rostechnadzor).
According to clause 3 of part 2 of Article 55.18 of the Code, information on the list of types of work that affect the safety of capital construction projects and the resolution of issues regarding the issuance of certificates of admission to which is referred by the general meeting of members of the self-regulatory organization to the scope of activity of the self-regulatory organization is entered into the state register of self-regulatory organizations .
In accordance with part 4 of this article, the supervisory body for self-regulatory organizations (Rostechnadzor) enters information about the self-regulatory organization into the state register of self-regulatory organizations within three working days from the date of receipt of notification of decisions adopted by the general meeting of members of the self-regulatory organization or the permanent collegial governing body of the self-regulatory organization decisions. According to Part 7 of this article, entering information into the state register of self-regulatory organizations and changing such information are carried out without charging a fee.
In accordance with Part 5 of Article 55.18, in the event of a violation by a self-regulatory organization of the requirements of the Code when making decisions, notification of which is received by the supervisory authority for self-regulatory organizations, this supervisory authority suspends the entry of the relevant information into the state register of self-regulatory organizations and sends an order to the self-regulatory organization to eliminate detected violation. Within ten days from the date of receipt of this order from the supervisory body for self-regulatory organizations, the self-regulatory organization is obliged to eliminate the identified violation and notify the supervisory body for self-regulatory organizations about this or appeal this order to the arbitration court.
Taking into account the above, the SRO has the right to issue certificates of admission to new types of work that affect the safety of capital construction projects, after ten days from the date of approval by the general meeting of SRO members of the decision to supplement the scope of activity of such an organization with the specified types of work and the requirements for issuing certificates of admission to such work. In this case, a corresponding notification must be sent to Rostekhnadzor.
3. Amendments to certificates of admission
Amendments to certificates of approval are carried out in the manner prescribed by parts 10-14 of Article 55.8 of the Code. Part 10 of this article determines that in order to make changes to the certificate, it is necessary to submit an application for amendments to the SRO. Such an application must be accompanied by documents confirming compliance with the requirements for the issuance of certificates of admission, but only if the member of the SRO intends to obtain a certificate of admission to a different type or types of work that affect the safety of capital construction projects than those required. which are recorded in the certificate issued in accordance with the order of the Ministry of Regional Development of Russia dated December 9, 2008 No. 274.
In connection with the publication of a new edition of the list of types of work, the concept of “other type or types of work” must be understood as work that is different in comparison with those indicated in the certificate of admission not by name, but by the content of the types of work. If the content of the work is the same as that already indicated in the certificate in accordance with the previous edition of the list of types of work, then the application does not need to be accompanied by documents confirming compliance with the requirements for issuing certificates of admission. In this case, in accordance with Part 13 of Article 55.8 of the SRO Code, only the application is subject to verification in order to make a decision on making changes to the admission certificate. To establish the conformity of types of work from the lists approved by orders of the Ministry of Regional Development No. 274 and No. 624, we propose to use the Table of Conformity of Types of Work (attached).
4. Obtaining a decision from Rostechnadzor to enter information into the state register about changing the scope of activity of the SRO in order to confirm on behalf of the state the right to issue certificates of admission in accordance with Order No. 624
In order to obtain a decision from Rostechnadzor to amend the decision to enter information into the state register of self-regulatory organizations, confirming the right of the self-regulatory organization to issue certificates of admission in accordance with Order No. 624, the self-regulatory organization must send a corresponding notification to Rostechnadzor in the form established by the order of Rostechnadzor dated 10.02 .2009 No. 57 (as amended on January 29, 2010).
Appendix 18 pages
R.Yu.Panov
Approval sheet:
Deputy Minister
…..(signature)
____________
(date of)
R.Yu.Panov
And about. directors
Department of Regulation
urban planning activities
(signature)
I.V.Mironov
Head of the Design Documentation Examination Department
_____________ …..(signature)
I.A. Sidorov
Correspondence table for types of work classified by the Ministry of Regional Development of Russia
to work that has an impact on safety
capital construction projects
Types of work according to the List approved by order of the Ministry of Regional Development of Russia dated December 30, 2009
№ 624
Types of work according to the List approved by Order of the Ministry of Regional Development of Russia dated December 9, 2008 No. 274
(as amended by Order No. 480 dated October 21, 2009)
List No. 2
List No. 1
1. Geodetic work performed on construction sites
1.1. Layout work during construction*
1.2. Geodetic control of the accuracy of geometric parameters of buildings and structures*
2. Preparatory work
2.1. Dismantling (dismantling) of buildings and structures, walls, ceilings, flights of stairs and other structural and related elements or parts thereof*
2. Work on demolition of buildings and dismantling of structures
2.2. Construction of temporary: roads; platforms; engineering networks and structures*
4510214 Installation of electric lighting systems for temporary buildings
4510215 Installation of temporary protective fences.
2.3. Construction of rail crane tracks and foundations (supports) of stationary cranes
1. Preparatory work at the construction site
4510223 Construction of crane tracks
2.4. Installation and dismantling of external and internal inventory scaffolding, technological waste chutes*
4510505 Installation and dismantling of inventory external and internal scaffolding
3. Excavation work
3.1. Mechanized soil development*
3.2. Soil development and drainage installation in water management construction
4. Work on the development of excavations and vertical planning
3.3. Soil development using hydromechanization method
3.4. Work on artificial freezing of soils
13. Work on artificial freezing of soils
3.5. Soil compaction with rollers, soil compactors or heavy rammers*
9. Work on compacting natural soils and constructing soil cushions
4510431 Soil compaction with heavy compactors
4510432 Soil compaction with rollers and soil compacting machines
3.6. Mechanized loosening and development of permafrost soils
4. Work on the development of excavations and vertical planning
3.7. Work on water reduction, organization of surface runoff and drainage
3. Work on water reduction, organization of surface runoff and drainage
4. Construction of wells
4.1. Drilling, construction and installation of oil and gas wells
4510551 Construction and installation of oil and gas wells
4510553 Drilling oil and gas wells and testing them for productivity
4.2. Drilling and construction of wells (except oil and gas wells)
35. Work on constructing well structures
4510550 Well construction work
4510562 Drilling relief wells
4510559 Filter head arrangement and water pumping.
4.3. Fastening wells with pipes, extracting pipes, freely lowering or lifting pipes from wells
35. Work on the construction of well structures 4510557 Fastening wells with pipes
4510554 Installation of filter casing or freezing pipes and devices
4510555 Installation of a filter on a column of water-lifting pipes
4.4. Grouting works
35. Work on constructing well structures
4510556 Cementation of the annulus and under-machine plugging
4520135 Installation of supports, plugging of wells and shafts
4.5. Construction of mine wells
35. Work on constructing well structures
4510558 Fastening the well with reinforced concrete rings
5. Piling works. Soil consolidation
5.1. Piling work carried out from the ground, including in sea and river conditions
5.2. Piling work carried out in frozen and permafrost soils
8. Work on the installation of pile foundations, sheet piling fences, anchors
4520163 Driving steel piles in permafrost soils
5.3. Arrangement of grillages
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
5.4. Installation of driven and bored piles
8. Work on the installation of pile foundations, sheet piling fences, anchors
4520161 Driving reinforced concrete piles
4520166 Installation of bored piles with drilling of wells and filling of hollow piles with concrete
5.5. Thermal strengthening of soils
4510437 Thermal strengthening of soils
5.6. Cementation of soil bases with driving injectors
12. Work on soil consolidation
4510438 Cementation of soil bases with driving injectors
5.7. Silication and resinization of soils
12. Work on soil consolidation
4510439 Silication and resinization of soils
5.8. Work on the construction of structures using the “wall in soil” method.
11. Work on the construction of structures using the “wall in soil” method
5.9. Driving and lifting of steel and sheet piles
8. Work on the installation of pile foundations, sheet piling fences, anchors
4520164 Driving and extracting steel and sheet piles
6. Construction of concrete and reinforced concrete monolithic structures
6.1. Formwork work
14. Concrete works
4510501 Installation of metal mesh formwork
4510503 Installation and dismantling of panel formwork
4510506 Installation and dismantling of wooden scaffolding, piers and formwork
6.2. Reinforcement works
14. Concrete works
4520115 Installation of reinforcement for monolithic reinforced concrete structures
6.3. Construction of monolithic concrete and reinforced concrete structures
14. Concrete works
4520132 Construction of rubble concrete and concrete foundations
4520133 Construction of concrete columns and rack supports
4520134 Construction of concrete walls and partitions
4520139 Preparation of concrete and mortars
4520141 Construction of reinforced concrete foundations, stops, retaining walls, rack supports
4520146 Construction of reinforced concrete external and internal walls
4520147 Construction of reinforced concrete columns
4520148 Construction of reinforced concrete walls, partitions, ventilation ducts
4520149 Construction of reinforced concrete beams, belts, lintels, floors and coverings, structures in horizontal sliding formwork
4520152 Strengthening building structures with reinforced concrete seals, clips and concrete linings
7. Installation of prefabricated concrete and reinforced concrete structures
7.1. Installation of foundations and structures of the underground part of buildings and structures
4520211 Installation of reinforced concrete foundations for columns, frames, supports
7.2. Installation of structural elements of the above-ground part of buildings and structures, including columns, frames, crossbars, trusses, beams, slabs, chords, wall panels and partitions
15. Work on installation of prefabricated reinforced concrete and concrete structures
4520212 Installation of reinforced concrete columns, capitals, frames, racks and rods
4520213 Installation of jumpers
4520214 Installation of rafter beams and trusses
4520215 Installation of wall panels for external and internal walls
4520217 Installation of loggia slabs, balconies, canopies, cornice slabs, plumbing trays
4520218 Installation of small reinforced concrete structures (parapets, drains, window sills)
4520219 Installation of staircases and landings
4520237 Laying beams and crossbars
4520238 Laying panels, shells and floor slabs and coverings of single-storey and multi-storey buildings
7.3. Installation of volumetric blocks, including ventilation blocks, elevator shafts and garbage chutes, sanitary cabins
15. Work on installation of prefabricated reinforced concrete and concrete structures
4520216 Installation of volumetric blocks of residential buildings
4520221 Installation of elevator shafts and volumetric bin elements
4520223 Installation of sanitary cabins
4520402 Installation of garbage chutes made of asbestos-cement pipes with a diameter of 400 mm with foot valves
8. Drilling and blasting during construction
7. Blasting works
9. Work on the installation of stone structures
9.1. Construction of building structures and structures made of natural and artificial stones, including cladding*
20. Work on the construction of stone structures
4520301 Laying foundations, basement walls, retaining walls, filling excavations with rubble stone
4520302 Laying walls made of ceramic stones
4520304 Masonry of structures made of limestone products with facing bricks
4520213 Installation of jumpers
4520406 Construction of partitions from piece gypsum and lightweight concrete slabs
9.2. Construction of brick structures, including those with cladding*
4520306 Brickwork of pillars, vaults, gazebos, porticos and other structures made of ordinary brick
4520307 Brickwork of walls made of ordinary clay and silicate bricks facing with ceramic bricks
4520308 Brick walls and ceramic tile cladding
4520309 Construction of partitions made of bricks and ceramic stones
9.3. Construction of heating stoves and hearths*
20. Work on the construction of stone structures
4520305 Bricklaying of channels, pits, furnaces, hearths, chimneys with grooves
10. Installation of metal structures
10.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures
4520101 Installation of frame structures of buildings and structures
4520104 Installation of structures of fully prefabricated buildings from three-layer aluminum panels
4520107 Installation of lightweight coating structures
4520108 Installation of gate structures, stairs, platforms, doors, hatches, manholes
4520111 Installation of window blocks, stained glass windows, partitions (made of aluminum alloys, steel and others)
4520112 Construction of buildings from blockboxes
4520113 Installation of spans made of steel structures with assembly and movement
4520116 Installation of metal stair railings
4520127 Sheathing walls and roofing with profiled iron or prefabricated panels
4520128 Fastening building structures with building clips, bolts, rings
19. Work on the installation of walls from SANDWICH panels and sheet assembly
10.2. Installation, strengthening and dismantling of transport gallery structures
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
10.3. Installation, strengthening and dismantling of tank structures
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
10.4. Installation, strengthening and dismantling of mast structures, towers, exhaust pipes
16. Work on installation of metal structures
4520109 Installation of open structures, switchgears, floodlight masts, antenna systems, waveguide bridges with supports
10.5. Installation, strengthening and dismantling of technological structures
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
10.6. Installation and dismantling of cable-supporting structures (braces, cable-stayed structures, etc.)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
11. Installation of wooden structures
11.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures, including glued structures *
11.2. Assembly of residential and public buildings from pre-fabricated parts supplied*
17. Work on installation of wooden structures
12. Protection of building structures, pipelines and equipment (except for main and field pipelines)
12.1. Lining works
4540153 Lining of surfaces with carbon and graphite blocks
12.2. Masonry made of acid-resistant bricks and shaped acid-resistant ceramic products
25. Work on anti-corrosion protection of building structures and equipment
4540151 Masonry made of acid-resistant brick, stone, andesite
4540152 Floor covering and surface lining with acid-resistant bricks
4540154 Lining of surfaces with acid-resistant boards
12.3. Protective coating with paints and varnishes*
25. Work on anti-corrosion protection of building structures and equipment
4540161 Painting surfaces with varnishes, paints, enamels
12.4. Gumming (lining with sheet rubber and liquid rubber mixtures)
25. Work on anti-corrosion protection of building structures and equipment
4540155 Covering and pasting of equipment surfaces with rubber, plastics, sealants, roll materials
12.5. Installation of adhesive insulation
4540107 Installation of adhesive waterproofing
12.6. Installation of metallization coatings
25. Work on anti-corrosion protection of building structures and equipment
4540157 Electrometallization of surfaces with zinc, aluminum, nichrome and stainless wire
12.7. Applying a face coating when installing a monolithic floor in rooms with aggressive environments
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
12.8. Antiseptic treatment of wooden structures
25. Work on anti-corrosion protection of building structures and equipment
4540164 Antiseptic treatment of wooden building structures
12.9. Waterproofing of building structures
24. Work on waterproofing building structures
12.10. Work on thermal insulation of buildings, building structures and equipment
12.11. Pipeline thermal insulation work*
26. Work on thermal insulation of building structures, pipelines and equipment
4540146 Coating the surface of pipeline insulation with asbestos-cement casings, glass cement, fiberglass, fiberglass laminate
4540147 Coating the surface of pipeline insulation with sheet metal or aluminum corrugated sheets
4540148 Coating the surface of pipeline insulation, wrapping and gluing the insulation with films, fabrics, roll materials
12.12. Fire protection work for building structures and equipment
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
13. Roof installation
13.1. Installation of roofs made of piece and sheet materials*
4540121 Installation of asbestos-cement roofs
4540122 Installation of tile roofs with sheathing
4540125 Installation of small roofing coverings and linings on facades made of roofing iron
4540126 Installation of gutters with overhangs and roof railings
4540127 Primer of bases and vapor barrier device
13.2. Installation of roofs from roll materials*
23. Roofing works
4540123 Installation of roll roofs
13.3. Installation of self-leveling roofs*
23. Roofing works
4540124 Installation of roofs made of bitumen mastic with fiberglass mesh or fiberglass laying
14. Facade work
14.1. Surface cladding with natural and artificial stones and linear shaped stones*
4520307 Brickwork of walls made of ordinary clay and silicate bricks faced with ceramic bricks;
4520308 Brick walls and facing with ceramic slabs;
4520304 Masonry of structures made of limestone products with facing bricks.
14.2. Installation of ventilated facades*
19. Work on the installation of walls from SANDWICH panels and sheet assembly;
4520127 Sheathing walls and roofing with profiled iron or prefabricated panels.
15. Installation of internal engineering systems and equipment of buildings and structures
15.1. Installation and dismantling of water supply and sewerage systems*
4530201 Installation of valves, valves, check valves, taps and mixers on internal networks
4530202 Installation of safety valves, intake valves, pressure reducing valves
4530204 Assembly and installation of valve units and linear taps
4530221 Installation of water meter units
4530469 Insertion and connection of pipelines into existing highways.
15.2. Installation and dismantling of the heating system*
27. Work on the installation of internal engineering systems and equipment
4530224 Installation of water heaters and boilers
4530225 Installation of high-speed and capacitive water heaters
4530226 Installation of steam and water distribution combs made of steel pipes
4530229 Installation of air collectors made of steel pipes and air vents and hydraulic valves
4530231 Installation of elevator units
4530232 Installation of indicating instruments (pressure gauges, thermometers, level indicators, air valves)
4530246 Installation of heating cast iron sectional steam boilers
4530247 Installation of centrifugal pumps with piping
4530245 Installation of heating water and steam-water heating boilers
4530451-4530464 Laying of pipelines
4530465 Installation of filters, water and oil separators when laying pipelines
15.3. Installation and dismantling of the gas supply system
27. Work on the installation of internal engineering systems and equipment
4530233 Installation of gas stoves
4530234 Installation of gas burner devices
15.4. Installation and dismantling of the ventilation and air conditioning system*
27. Work on the installation of internal engineering systems and equipment
4530235 Installation of pressure and pressure regulators
4530239 Installation of filters, scrubbers, cyclones
4530241 Installation of heaters and air heaters
4530243 Installation of fans and ventilation units
4530244 Installation of supply chambers for irrigation, maintenance, leveling, recirculation
15.5. Power supply system*
27. Work on the installation of internal engineering systems and equipment
4530271 Laying electrical wiring in apartments of residential buildings
4530272 Laying distribution networks in basements, attics, staircases
4530274 Laying cables secured with cables or staples
4530275 Tightening and laying wires
4530276 Installation of input distribution device
4530277 Installation of risers in finished channels on floors with installation of shields
4530278 Installation of lighting panels
4530279 Installation of electric stoves
Suspension of feeder fastenings on intermediate, corner and anchor bases
4530295 Installation of a lightning rod, cable platform, hatches, steps, control point on supports and roofs of buildings
15.6. Installation of electrical and other networks for controlling life support systems of buildings and structures*
27. Work on the installation of internal engineering systems and equipment
4530467 Installation of embedded and selected devices for automation systems, fire extinguishing installations, equipment for grease lubrication systems
4530634 Installation of short circuits, disconnectors, switches, arresters for voltages up to 750 kV
4530637 Installation of switches, circuit breakers, air circuit breakers, plug-in devices
4530638 Installation of distribution and lighting panels, terminal boxes and illuminators
4530639 Installation of single-row and double-row panels
4530642 Installation of ballast and guide equipment
4530643 Installation of batteries, alkaline batteries with charging
4530644 Installation of electric heating devices
4530646 Installation of insulators
16. Installation of external water supply networks
16.1. Laying water pipelines
4530173 Laying pipelines from reinforced concrete pressure pipes
4530175 Laying pipelines from asbestos-cement pressure pipes
4530176 Laying pipelines from cast iron pressure pipes
4530177 Laying pipelines from steel pipes with the installation of hydraulic valves, bypasses, candles
4530179 Channelless laying of steel pipelines with anti-corrosion, reinforced concrete and bitumen-perlite insulation
4530181 Laying channelless pipelines from polyethylene pipes
16.2. Installation and dismantling of shut-off valves and water supply network equipment
28. Work on installation of external engineering networks and communications
4530466 Installation of shut-off valves
29. Work on installation of technological equipment
4530466 Installation of shut-off valves
16.3. Construction of water wells, heads, drainage dampers
28. Work on installation of external engineering networks and communications
4530113 Construction of water wells, heads, drainage damper
16.4. Cavity cleaning and testing of water pipes
28. Work on installation of external engineering networks and communications
17. Construction of external sewerage networks
17.1. Laying of non-pressure sewer pipelines
28. Work on installation of external engineering networks and communications
4530177-4530181 Pipe laying
17.2. Laying sewer pressure pipelines
28. Work on installation of external engineering networks and communications
4530173-176; 4530191, 4530193-4530194 Pipe laying
17.3. Installation and dismantling of shut-off valves and sewer network equipment
4530466 Installation of shut-off valves
17.4. Construction of sewer and drainage wells
28. Work on installation of external engineering networks and communications
4530111 Construction of water supply, sewer and drainage wells
17.5. Construction of a filter base for sludge beds and filtration fields
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
17.6. Laying drainage pipes on sludge beds
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
17.7. Cavity cleaning and testing of sewer pipelines
28. Work on installation of external engineering networks and communications
4530187 Testing pipelines for strength and tightness with flushing and installation of seals
18. Installation of external heat supply networks
18.1. Laying heating pipelines with coolant temperatures up to 115 degrees Celsius
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
18.2. Laying heating pipelines with a coolant temperature of 115 degrees Celsius and above
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
18.3. Installation and dismantling of shut-off valves and equipment of heat supply networks
29. Work on installation of technological equipment
4530466 Installation of shut-off valves
18.4. Construction of wells and chambers of heat supply networks
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
18.5. Cavity cleaning and testing of heating pipelines
28. Work on installation of external engineering networks and communications
4530187 Testing pipelines for strength and tightness with flushing and installation of seals
19. Installation of external gas supply networks, except main ones
19.1. Laying gas pipelines with operating pressure up to 0.005 MPa inclusive
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
19.2. Laying gas pipelines with operating pressure from 0.005 MPa to 0.3 MPa inclusive
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
19.3. Laying gas pipelines with operating pressure from 0.3 MPa to 1.2 MPa inclusive (for natural gas), up to 1.6 MPa inclusive (for liquefied petroleum gas)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
19.4. Installation of condensate collectors of hydraulic seals and compensators on gas pipelines
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
19.5. Installation and dismantling of gas control points and installations
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
19.6. Installation and dismantling of tank and group cylinder liquefied gas plants
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
19.7. Inserting a gas pipeline into buildings and structures
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
19.8. Installation and dismantling of gas equipment for consumers using natural and liquefied gas
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
19.9. Tapping under pressure into existing gas pipelines, disconnecting and plugging under pressure existing gas pipelines
28. Work on installation of external engineering networks and communications
4530469 Insertion and connection of pipelines into existing mains
19.10. Cavity cleaning and testing of gas pipelines
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
20. Construction of external electrical networks
20.1. Construction of power supply networks with voltage up to 1 kV inclusive*
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
20.2. Construction of power supply networks with voltage up to 35 kV inclusive
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
20.3. Construction of power supply networks with voltage up to 330 kV inclusive
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
20.4. Construction of power supply networks with voltages over 330 kV
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
20.5. Installation and dismantling of supports for overhead power lines with voltage up to 35 kV
28. Work on installation of external engineering networks and communications
4530128 Installation of power transmission line supports 0.4-35 kV contact network and industrial electric transport, communication and radio lines wooden
4530129 Installation of 0.4-35 kV power transmission line supports for contact networks and industrial electric transport, reinforced concrete communication and radio lines
20.6. Installation and dismantling of supports for overhead power lines with voltage up to 500 kV
28. Work on installation of external engineering networks and communications
4530125 Installation of 35-750 kV power transmission line supports, feeder lines and wooden automatic blocking lines
20.7. Installation and dismantling of supports for overhead power lines with voltages over 500 kV
28. Work on installation of external engineering networks and communications
4530126 Installation of 35-750 kV power transmission line supports, feeder lines and reinforced concrete automatic blocking lines
4530127 Installation of 35-750 kV power transmission line supports, radio masts and steel radio towers
20.8. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltage up to 35 kV inclusive
28. Work on installation of external engineering networks and communications
20.9. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltages over 35 kV
28. Work on installation of external engineering networks and communications
4530151 Suspension of wires for power lines and contact lines
4530152 Suspension of lightning protection cables
20.10. Installation and dismantling of transformer substations and linear electrical equipment with voltage up to 35 kV inclusive
29. Work on installation of technological equipment
20.11. Installation and dismantling of transformer substations and linear electrical equipment with voltage over 35 kV
29. Work on installation of technological equipment
4530631 Installation of power transformers and substation kits
20.12. Installation of distribution devices, switching equipment, protection devices
28. Work on installation of external engineering networks and communications
4530154 Installation of disconnectors, arresters, switches on overhead line supports and switchgear structures
21. Installation of external communication lines, including telephone, radio and television*
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22. Construction of oil and gas industry facilities
22.1. Installation of main and field pipelines
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.2. Work on the arrangement of oil and gas preparation facilities for transport
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.3. Construction of oil depots and gas storage facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.4. Construction of crossing structures under linear objects (roads and railways) and other obstacles of natural and artificial origin
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.5. Work on the construction of crossings using directional drilling
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.6. Device for electrochemical protection of pipelines
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.7. Tapping under pressure into existing main and field pipelines, disconnecting and plugging under pressure existing main and field pipelines
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.8. Carrying out anti-corrosion protection and insulation work on main and field pipelines
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.9. Work on the development of oil and gas fields on the sea shelf
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.10. Work on the construction of gas filling compressor stations
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.11. Quality control of welded joints and their insulation
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
22.12. Cavity cleaning and testing of main and field pipelines
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
23. Installation work
23.1. Installation of lifting and transport equipment
29. Work on installation of technological equipment
4530421 Installation of load-lifting cranes
4530422 Installation of conveyors, belts, trolleys, roller tables, conveyors, elevators, elevators
4530426 Installation of aerial ropeway equipment with testing
4530428 Installation of elevators, lifting platforms, flat-cup elevators, mine cages, loading and unloading devices
4530751 Installation of escalators
23.2. Elevator installation
14. Concrete works
4520118 Installation of anchor bolts and embedded parts
29. Work on installation of technological equipment
4530423 Installation of components of lifting and transport equipment
4530425 Installation of chains, transition sections, ropes
4530427 Installation of safety mesh barriers
4530428 Installation of elevators, lifting platforms, flat-cup elevators, mine cages, loading and unloading devices
4530429 Installation of winches and lifting and traction machines
4530641 Installation of cabinets, consoles, shelving and input distribution devices
4530645 Installation of electrical appliances
4530651 Installation of grounding conductors
4530652 Installation of lamps
4530658 Laying internal electrical wiring
4530783 Installations of operational monitoring and control equipment, collection and transmission of initial information
23.3. Installation of equipment for thermal power plants
29. Work on installation of technological equipment
4530300 Installation of equipment for thermal power plants
23.4. Installation of boiler room equipment
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
23.5. Installation of compressor units, pumps and fans*
29. Work on installation of technological equipment
4530670 Installation of compressor machines, pumps and fans
4530671 Installation of compressor units and piston, centrifugal expanders
4530672 Installation of ventilation equipment
4530673 Installation of general purpose pumping units
23.6. Installation of electrical installations, equipment, automation and alarm systems*
29. Work on installation of technological equipment
4530630 Installation of electrical installations
4530753 Installation of communication equipment for mines and railway transport
4530761 Installation of electrical alarm, fire, calling and remote alarm equipment with blocking surfaces
4530780 Installation of instruments, automation and computer equipment
4530781 Installation of devices
4530782 Installation of indicators, sensors, signaling devices of various parameters
4530783 Installation of operational monitoring and control equipment, collection and transmission of initial information
4530785 Installation of panels, shields, tripods, remote controls
23.7. Installation of equipment for nuclear power plants
29. Work on installation of technological equipment
4530310 Installation of equipment for nuclear power plants
23.8. Installation of equipment for purification and preparation for gas and oil transportation
29. Work on installation of technological equipment
4530700 Installation of equipment for gas purification
4530701 Installation of equipment for electrical and mechanical gas purification
23.9. Installation of equipment for oil and gas pumping stations and for other product pipelines
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
23.10. Installation of equipment for liquefied natural gas
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
23.11. Installation of gas station equipment
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
23.12. Installation of equipment for ferrous metallurgy enterprises
29. Work on installation of technological equipment
4530370 Installation of equipment for ferrous metallurgy enterprises
23.13. Installation of equipment for non-ferrous metallurgy enterprises
29. Work on installation of technological equipment
4530380 Installation of equipment for non-ferrous metallurgy enterprises
23.14. Installation of equipment for the chemical and oil refining industries
29. Work on installation of technological equipment
4530350 Installation of equipment for chemical and oil refining industries
23.15. Installation of mining and processing equipment
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
23.16. Installation of equipment for railway infrastructure facilities
29. Work on installation of technological equipment
4530730 Installation of signaling, centralization and interlocking equipment in railway transport
4530733 Installation of equipment for mechanization, automation of sorting humps and pneumatic mail
23.17. Installation of subway and tunnel equipment
29. Work on installation of technological equipment
4530750 Installation of equipment for subways and tunnels
23.18. Installation of equipment for hydroelectric stations and other hydraulic structures
29. Work on installation of technological equipment
4530320 Installation of equipment for hydroelectric stations and hydraulic structures
23.19. Installation of equipment for electrical industry enterprises
29. Work on installation of technological equipment
4530620 Installation of equipment for electrical industry enterprises
23.20. Installation of equipment for construction materials industry enterprises
29. Work on installation of technological equipment
4530470 Installation of equipment for construction materials industry enterprises
4530475 Installation of equipment for the production of asbestos-cement products
4530476 Installation of equipment for the production of bricks, tiles, ceramic products, cinder blocks and slag granulation
4530477 Installation of equipment for the production of gypsum and gypsum products
4530478 Installation of equipment for the extraction and processing of facing stone
4530481 Installation of equipment for the production of reinforced concrete products and products from cellular concrete
4530484 Installation of equipment for the production of reed products and particle boards
23.21. Installation of equipment for pulp and paper industry enterprises
29. Work on installation of technological equipment
4530490 Installation of equipment for pulp and paper industry enterprises
4530491 Installation of equipment for preparing raw materials for processing, for the production of cellulose and semi-cellulose
4530492 Installation of equipment for the production of paper, cardboard, commercial pulp and commercial wood pulp
4530493 Installation of equipment for processing paper and cardboard into products, for cutting, sorting, packaging and transporting paper, cardboard and pulp
23.22. Installation of equipment for textile industry enterprises
29. Work on installation of technological equipment
4530570 Installation of equipment for textile industry enterprises
4530573 Installation of equipment for finishing textile production
23.23. Installation of equipment for printing industry enterprises
29. Work on installation of technological equipment
4530500 Installation of equipment for printing industry enterprises
4530501 Installation of equipment for the production of text and stereotypical forms
4530502 Installation of printing, copying equipment
4530503 Installation of stitching and binding equipment, for the production and finishing of cardboard and white goods, cardboard production
23.24. Installation of equipment for food industry enterprises*
29. Work on installation of technological equipment
4530580 Installation of equipment for food industry enterprises
23.25. Installation of equipment for theatrical and entertainment enterprises
29. Work on installation of technological equipment
4530824 Installation of sound technical installations for theatrical and entertainment enterprises
4530820 Installation of equipment for theatrical and entertainment enterprises
23.26. Installation of equipment for granaries and grain processing enterprises
29. Work on installation of technological equipment
4530530 Installation of equipment for granaries and grain processing enterprises
4530531 Installation of equipment for drying and cleaning grain
4530532 Installation of equipment for the production of flour and corn
4530533 Installation of equipment for the production of mixed feed
23.27. Installation of equipment for cinematography enterprises*
29. Work on installation of technological equipment
4530830 Installation of equipment for cinematography enterprises
23.28. Installation of equipment for electronics and communications industry enterprises*
29. Work on installation of technological equipment
4530720 Installation of equipment for electronic industry and communications enterprises
23.29. Installation of equipment for healthcare institutions and medical industry enterprises*
29. Work on installation of technological equipment
4530800 Installation of equipment for healthcare institutions and medical industry enterprises
4530801 Installation of sterilization and pharmacy equipment
4530802 Installation of otolaryngological and dental equipment
4530811 Installation of equipment for medical industry enterprises
23.30. Installation of equipment for agricultural production, including fish processing and fish storage*
29. Work on installation of technological equipment
4530520 Installation of equipment for agricultural production
23.31. Installation of equipment for consumer services and utilities*
29. Work on installation of technological equipment
4530690 Installation of equipment for enterprises repairing household machines and appliances
4530691 Installation of machines and installations for washing, ironing and storing linen
4530692 Installation of machines and installations for dry cleaning and dyeing of clothes and carpets
4530693 Installation of machines and installations for enterprises for the repair of household machines and appliances
23.32. Installation of water intake equipment, sewerage and treatment facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
23.33. Installation of equipment for communication facilities*
29. Work on installation of technological equipment
4530729 Installation of equipment for communications industry enterprises
4530740 Installation of communication equipment
4530741 Installation of telephone exchanges and switches for central bank, MB, dispatcher, long-distance and institutional communications
4530742 Installation of telephone exchanges and switches of the MB system for director, dispatch and institutional communications and telephone quasi-telephone exchanges
4530743 Installation of rural telephone exchanges with testing and configuration
23.34. Installation of equipment for space infrastructure facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
23.35. Installation of airport equipment and other aviation infrastructure facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
23.36. Installation of equipment for sea and river ports
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
24. Commissioning work
24.1. Commissioning of lifting and transport equipment
30. Commissioning works
4530882 Commissioning of continuous transport mechanisms
24.2. Commissioning of elevators
30. Commissioning works
4530880 Commissioning of lifting and transport equipment
4530881 Commissioning of lifting and transport mechanisms of intermittent action
24.3. Commissioning of synchronous generators and excitation systems
30. Commissioning works
4530851 Commissioning of synchronous generators and excitation systems
24.4. Commissioning of power and instrument transformers
30. Commissioning works
4530852 Commissioning of power and instrument transformers
24.5. Commissioning of switching devices
30. Commissioning works
4530853 Commissioning of switching devices
24.6. Commissioning of relay protection devices
30. Commissioning works
4530854 Commissioning of relay protection devices
24.7. Commissioning of automation in power supply*
30. Commissioning works
4530855 Commissioning of automation in power supply
24.8. Commissioning of voltage and operating current systems
30. Commissioning works
4530856 Commissioning of voltage and operating current systems
24.9. Commissioning of electrical machines and electric drives
30. Commissioning works
4530857 Commissioning of electrical machines and electric drives
24.10. Commissioning of automation systems, alarm systems and interconnected devices*
30. Commissioning works
4530858 Commissioning of automation systems, alarm systems and interconnected devices
24.11. Commissioning of autonomous systems*
30. Commissioning works
4530863 Commissioning work for autonomous adjustment of systems
24.12. Commissioning works for complex adjustment of systems*
30. Commissioning works
4530864 Commissioning works for complex adjustment of systems
24.13. Commissioning of telemechanics*
30. Commissioning works
4530865 Commissioning of telemechanics equipment
24.14. Adjustment of ventilation and air conditioning systems*
30. Commissioning works
4530870 Commissioning of ventilation and air conditioning systems
24.15. Commissioning of automatic machine lines
30. Commissioning works
4530891 Commissioning of automatic machine lines
24.16. Commissioning of multi-purpose metal-cutting machines with CNC
30. Commissioning works
4530893 Commissioning of metal-cutting multi-purpose CNC machines
24.17. Commissioning of unique metal-cutting machines weighing over 100 tons
30. Commissioning works
4530895 Commissioning of unique metal-cutting machines weighing over 100 tons
24.18. Commissioning of refrigeration units*
30. Commissioning works
30. Commissioning works
4530901 Commissioning of refrigeration units
24.19. Commissioning of compressor units
30. Commissioning works
4530900 Commissioning work of refrigeration and compressor units
30. Commissioning works
4530902 Commissioning works of compressor units
24.20. Commissioning of steam boilers
30. Commissioning works
4530911 Commissioning of steam boilers
24.21. Commissioning works of hot water heating boilers*
30. Commissioning works
4530912 Commissioning works of hot water heating boilers
24.22. Commissioning of boiler and auxiliary equipment*
30. Commissioning works
4530913 Commissioning works of boiler room and auxiliary equipment
24.23. Commissioning of water treatment equipment and chemical water treatment equipment
30. Commissioning works
4530914 Commissioning of water treatment equipment and chemical water treatment equipment
24.24. Commissioning of technological installations of fuel facilities
30. Commissioning works
4530915 Commissioning of technological installations of fuel facilities
24.25. Commissioning of the gas-air duct
30. Commissioning works
4530916 Commissioning work of the gas-air duct
24.26. Commissioning of general boiler systems and utilities
30. Commissioning works
4530917 Commissioning of general boiler systems and utilities
24.27. Commissioning of equipment for wood processing and finishing
30. Commissioning works
4530920 Commissioning of woodworking equipment
30. Commissioning works
4530922 Commissioning of equipment for wood processing and finishing
24.28. Commissioning of drying units
30. Commissioning works
4530923 Commissioning works of drying units
24.29. Commissioning works of water supply facilities
30. Commissioning works
24.30. Commissioning works of sewerage structures
30. Commissioning works
4530930 Commissioning works of water supply and sewerage facilities
24.31. Commissioning works at oil and gas complex facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
25. Construction of roads and airfields
25.1. Work on the construction of roadbeds for highways, airport aprons, runways, taxiways
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
25.2. Construction of highway foundations
31. Work on the construction of highways
4540243 Construction of soil foundations, earthen and crushed stone coverings
25.3. Construction of airport apron bases, runways, taxiways
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
25.4. Construction of road surfaces, including those reinforced with binding materials
4540245 Construction of concrete, mosaic, cement, metal-cement coatings
4540246 Construction of asphalt concrete and xylolite coatings
25.5. Coatings for airport aprons, runways, and taxiways
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
25.6. Construction of drainage, catchment, culvert, and spillway devices
28. Work on the installation of external engineering networks and communications for surface runoff and drainage
4510205 Construction of drainage and drainage ditches
4510206 Device for drainage of trenches and pits when working in wet soils
4510207 Closed drainage device
4510461 Construction of structures made of stone and rock
4510462 Backfilling with sand or slag using mechanisms
4510463 Construction of underlying layers and bases of sand and gravel
4510464 Construction of underlying layers and foundations of crushed stone
4510465 Construction of drainage layers and filters made of crushed stone (coal)
4510466 Installation of drainage filters made of gravel and sand
4510467 Laying porous ceramic plates of aerates
25.7. Construction of protective fences and road construction elements
31. Work on the construction of highways
4540383 Installation of road parapet barriers on reinforced concrete posts
4540384 Manufacturing and installation of wooden railings and fences
25.8. Road marking device
31. Work on the construction of highways
4540385 Road marking device
26. Construction of railway and tram tracks
26.1. Work on the construction of roadbed for railway tracks
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
26.2. Work on the construction of roadbed for tram tracks
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
26.3. Construction of the upper structure of the railway track
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
26.4. Construction of drainage and protective structures for railway subgrades
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
26.5. Installation of signaling, centralization and blocking of railways
29. Work on installation of technological equipment
4530730 Installation of signaling, centralization and interlocking equipment in railway transport
4530731 Installation of electrical system equipment and route control devices, mechanical centralization and semi-automatic blocking
4530732 Installation of control room equipment, electrical centralization and interlocking
26.6. Electrification of railways
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
26.7. Consolidation of soils in the railway right-of-way
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
26.8. Construction of railway crossings
32. Work on the construction of railway tracks
4540411 Construction of crossings over normal gauge railway tracks
4540408 Arrangement of crossings over narrow gauge tracks
27. Construction of tunnels and subways
27.1. Drilling of tunnels and subways without the use of special excavation methods
34. Mining works
4510533 Drilling of tunnels, furnels, chambers, adits with the installation of permanent and temporary intersections
27.2. Drilling tunnels and subways using artificial freezing
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
27.3. Drilling of tunnels and subways using grouting
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
27.4. Drilling of tunnels and subways using electrochemical consolidation
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
27.5. Drilling of tunnels and subways using lower support
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
27.6. Construction of internal structures of tunnels and subways
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
27.7. Subway track arrangement
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
28. Construction of mine structures
28.1. Drilling of mine structures without the use of special excavation methods
34. Mining works
4510531 Drilling of mine shafts, pits, workings
28.2. Drilling of mine structures using artificial freezing
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
28.3. Drilling of mine structures using grouting
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
28.4. Drilling of mine structures using electrochemical consolidation
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
28.5. Drilling of mine structures using lowering support
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
29. Construction of bridges, overpasses and overpasses
29.1. Construction of monolithic reinforced concrete and concrete structures of bridges, overpasses and overpasses
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
29.2. Construction of prefabricated reinforced concrete structures of bridges, overpasses and overpasses
15. Work on installation of prefabricated reinforced concrete and concrete structures
4520233 Installation of bridge spans from prefabricated reinforced concrete structures from the shore
29.3. Construction of pedestrian bridge structures
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
29.4. Installation of steel spans of bridges, overpasses and overpasses
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
29.5. Construction of wooden bridges, overpasses and overpasses
17. Work on installation of wooden structures
4540208 Construction of wooden structures of bridges, overpasses, wheel pipelines, hydraulic structures
4540211 Construction of a wooden bridge deck
29.6. Construction of stone bridges, overpasses and overpasses
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
29.7. Laying culvert pipes on finished foundations (bases) and drainage trays
15. Work on installation of prefabricated reinforced concrete and concrete structures
4520239 Laying reinforced concrete culverts under embankments and collectors for laying communications
30. Hydraulic work, diving work
30.1. Development and movement of soil using hydraulic and floating dredgers
6. Hydromechanized and dredging works
4510415 Development and movement of soil by hydraulic and floating dredgers
30.2. Loosening and development of soils under water by mechanization and delivery to a dump or floating craft
6. Hydromechanized and dredging works
4510423 Loosening and development of soils under water using a mechanized method and delivery to a dump or floating craft
30.3. Drilling and construction of wells underwater
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
30.4. Piling work carried out in offshore conditions from floating craft, including installation of shell piles
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
30.5. Piling work carried out in river conditions from floating craft, including installation of shell piles
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
30.6. Construction of structures in sea and river conditions from natural and artificial massifs
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
30.7. Construction of dams
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
30.8. Installation and dismantling of building structures in underwater conditions
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
30.9.Laying pipelines in underwater conditions
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
30.10. Laying cables in underwater conditions, including electrical and communications
28. Work on installation of external engineering networks and communications
4530153 Laying cables in underwater trenches
30.11. Diving (underwater construction) work, including quality control of hydraulic engineering work under water
33. Underwater (diving) work
4510521 Lifting objects from water
4510522 Leveling and vibration compaction of horizontal beds under water by divers
4510523 Moving stone under water, removing stone and rubble from water
4510524 Lowering metal and reinforced concrete shells of heads under water
4510525 Installation of mooring barrels on reinforced concrete anchors in the water area
31. Industrial furnaces and chimneys
31.1. Laying blast furnaces
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
31.2. Laying the upper structure of glass furnace baths
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
31.3. Installation of furnaces from prefabricated elements of increased factory readiness
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
31.4. Electrolysers for the aluminum industry
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
31.5. Lining of industrial smoke and ventilation furnaces and pipes
22. Work on the construction and lining of industrial furnaces and smoke
4520412 Lining of reinforced concrete industrial pipes with acid-resistant bricks
4520303 Laying and lining of industrial pipes
32. Work to carry out construction control by a legal entity or individual entrepreneur engaged by a developer or customer on the basis of an agreement
32.1. Construction control of general construction works (groups of types of work No. 1-3, 5-7, 9-14)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.2. Construction supervision of well development work (group of types of work No. 4)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.3. Construction control of drilling and blasting operations (group of types of work No. 8)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.4. Construction supervision of work in the field of water supply and sewerage (type of work No. 15.1, 23.32, 24.29, 24.30, groups of types of work No. 16, 17)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.5. Construction supervision of work in the field of heat and gas supply and ventilation (types of work No. 15.2, 15.3, 15.4, 23.4, 23.5, 24.14, 24.19, 24.20, 24.21, 24.22, 24.24, 24.25, 24.26, groups of types of work No. 18, 19.)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.6. Construction supervision of work in the field of fire safety (type of work No. 12.3, 12.12, 23.6, 24.10-24.12)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.7. Construction supervision of work in the field of electrical supply (type of work
No. 15.5, 15.6, 23.6, 24.3-24.10, group of types of work No. 20)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.8. Construction control during construction, reconstruction and major repairs of communication structures (types of work No. 23.33, group of types of work No. 21)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.9. Construction control during construction, reconstruction and major repairs of oil and gas industry facilities (type of work No. 23.9, 23.10, group of types of work No. 22)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.10. Construction control during the construction, reconstruction and major repairs of highways and airfields, bridges, overpasses and overpasses (type of work No. 23.35, groups of types of work No. 25, 29)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.11. Construction control during the installation of railway and tram tracks (types of work No. 23.16, group of types of work No. 26)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.12. Construction control during construction, reconstruction and major repairs in underground conditions (types of work No. 23.17, groups of types of work No. 27, 28)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.13. Construction control of hydraulic engineering and diving works (group of types of work No. 30)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.14. Construction control during construction, reconstruction and overhaul of industrial furnaces and chimneys (group of types of work No. 31)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
32.15. Construction control during construction, reconstruction and major repairs of nuclear energy facilities (23.7)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33. Work on organizing construction, reconstruction and major repairs by a legal entity or individual entrepreneur (general contractor) attracted by the developer or customer on the basis of an agreement
38. Work on organizing construction, reconstruction and major repairs by a legal entity or individual entrepreneur (general contractor) attracted by the developer or customer on the basis of an agreement
33.1. Industrial engineering
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.1. Enterprises and facilities of the fuel industry
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.2. Enterprises and facilities of the coal industry
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.3. Ferrous metallurgy enterprises and facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.4. Non-ferrous metallurgy enterprises and facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.5 Enterprises and facilities of the chemical and petrochemical industry
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.6 Enterprises and facilities of mechanical engineering and metalworking
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.7. Enterprises and facilities of the forestry, woodworking, pulp and paper industries
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.8. Light industry enterprises and facilities*
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.9. Food industry enterprises and facilities*
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.10. Enterprises and facilities of agriculture and forestry*
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.11. Thermal power plants
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.12. Nuclear energy facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.13. Power supply facilities over 110 kV
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.1.14. Oil and gas complex facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.2. Transport construction
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.2.1. Highways and road transport infrastructure facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.2.2. Railways and railway infrastructure facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.2.3. Airports and other aviation infrastructure facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.2.4. Road and railway tunnels
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.2.5. Subways
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.2.6. Bridges (large and medium)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.2.7. Enterprises and public transport facilities*
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.3. Housing and civil construction
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.4. Power supply facilities up to 110 kV inclusive
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.5. Heat supply facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.6. Gas supply facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.7. Water supply and sewerage facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.8. Buildings and structures of communication facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.9. Marine transport facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.10. River transport objects
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.11. Hydropower facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.12. Dams, dams, canals, bank protection structures, reservoirs (except for hydropower facilities)
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
33.13. Irrigation facilities
It is necessary to submit documents confirming compliance with the Requirements for the issuance of certificates
* These types and groups of types of work require obtaining a certificate of approval for types of work that affect the safety of a capital construction project, in the case of such work being performed at the facilities specified in Article 48.1 of the Town Planning Code of the Russian Federation
A certificate of admission to a type of work from List No. 2 is issued without additional submission of documents on compliance with the Requirements for the issuance of certificates if a member of the Partnership has a certificate for all types (codes) of work from List No. 1 indicated opposite this type of work.
Order of the Ministry of Regional Development of the Russian Federation
dated December 30, 2009 No. 624
"On approval of the List of types of work for engineering surveys, for the preparation of design documentation, for construction, reconstruction, major repairs of capital construction projects that affect the safety of capital construction projects"
Registration No. 16902
Pursuant to Part 5 of Article 8 of the Federal Law of July 22, 2008 No. 148-FZ “On Amendments to Town Planning Code of the Russian Federation and certain legislative acts of the Russian Federation" (Collection of Legislation of the Russian Federation, 2008, No. 30 (Part 1), Art. 3604) and in accordance with the Decree of the Government of the Russian Federation of November 19, 2008№ 864 “On measures to implement the Federal Law of July 22, 2008 No. 148-FZ “On Amendments to the Town Planning Code of the Russian Federation and certain legislative acts of the Russian Federation” (Collected Legislation of the Russian Federation, 2008, No. 48, Art. 5612), I order :
1. Approve the attached types of work on engineering surveys, on the preparation of design documentation, on construction, reconstruction, major repairs of capital construction projects that affect the safety of capital construction projects (hereinafter referred to as the List).
2. Establish that the List does not include types of work on the preparation of design documentation, construction, reconstruction, major repairs in relation to objects for which the issuance of a construction permit is not required in accordance with Part 17 of Article 51 of the Town Planning Code of the Russian Federation (Collection of Legislation Russian Federation, 2005, No. 1, Article 16; 2008, No. 30 (Part 2), Article 3616), as well as in relation to individual housing construction projects (detached residential buildings with no more than three floors, intended for residence of no more than two families); residential buildings with no more than three floors, consisting of several blocks, the number of which does not exceed ten and each of which is intended for one family, has a common wall (common walls) without openings with the neighboring block or neighboring blocks, is located on a separate land plot and has access to public territory (blocked residential buildings); apartment buildings with no more than three floors, consisting of one or more block sections, the number of which does not exceed four, each of which contains several apartments and common areas and each of which has a separate entrance with access to the common area.
3. The order of the Ministry of Regional Development of the Russian Federation dated December 9, 2008 is declared invalid.№ 274 "On approval of the List of types of work for engineering surveys, for the preparation of design documentation, for construction, reconstruction, major repairs of capital construction projects that affect the safety of capital construction projects" (registered with the Ministry of Justice of Russia on January 16, 2009 No. 13086), as well as order Ministry of Regional Development of the Russian Federation dated October 21, 2009 No. 480 "On amendments to the order of the Ministry of Regional Development of the Russian Federation dated December 9, 2008 No. 274 "On approval of the List of types of work on engineering surveys, on the preparation of design documentation, on construction, reconstruction, major repairs of capital construction projects that affect the safety of capital construction projects" (registered with the Ministry of Justice of Russia on December 22, 2009 No. 15789) from the moment this order comes into force.
5. Control over the implementation of this Order shall be entrusted to the Deputy Minister of Regional Development of the Russian Federation V.A. Tokarev.
MinisterV. Basargin
5. Work as part of engineering and geotechnical surveys
(Performed as part of engineering-geological surveys or separately on the territory studied in engineering-geological terms for individual buildings and structures)
5.1. Drilling of mine workings with their testing and laboratory studies of the mechanical properties of soils with the determination of characteristics for specific schemes for calculating foundations
5.2. Field testing of soils with determination of their standard strength and deformation characteristics (stamp, shear, pressureometric, shear). Testing of reference and full-scale piles
5.3. Determination of standard mechanical characteristics of soils using static, dynamic and drilling sounding methods
5.4. Physical and mathematical modeling of the interaction of buildings and structures with the geological environment
5.5. Special studies of soil characteristics using separate programs for non-standard, including non-linear methods for calculating foundations and structures of buildings and structures
4.4. Work on preparing projects for internal low-current systems
4.5. Work on the preparation of projects for internal dispatching, automation and management of engineering systems
4.6. Work on preparing projects for internal gas supply systems
5. Work on preparing information on external networks of engineering support, on the list of engineering activities:
5.1. Work on the preparation of projects for external heat supply networks and their structures
5.2. Work on the preparation of projects for external water supply and sewerage networks and their structures
5.3. Work on the preparation of projects for external power supply networks up to 35 kV inclusive and their structures
5.4. Work on the preparation of projects for external power supply networks of no more than 110 kV inclusive and their structures
5.5. Work on the preparation of projects for external power supply networks of 110 kV and more and their structures
5.6. Work on the preparation of projects for external networks of low-current systems
5.7. Work on the preparation of projects for external gas supply networks and their structures
6. Work on preparing technological solutions:
6.1. Work on the preparation of technological solutions for residential buildings and their complexes
6.2. Work on the preparation of technological solutions for public buildings and structures and their complexes
6.3. Work on the preparation of technological solutions for industrial buildings and structures and their complexes
6.4. Work on the preparation of technological solutions for transport facilities and their complexes
6.5. Work on the preparation of technological solutions for hydraulic structures and their complexes
6.6. Work on the preparation of technological solutions for agricultural facilities and their complexes
6.7. Work on the preparation of technological solutions for special-purpose objects and their complexes
6.8. Work on the preparation of technological solutions for oil and gas facilities and their complexes
6.9. Work on the preparation of technological solutions for waste collection, processing, storage, processing and disposal facilities and their complexes
6.10. Work on the preparation of technological solutions for nuclear energy and industrial facilities and their complexes
6.11. Work on the preparation of technological solutions for military infrastructure facilities and their complexes
6.12. Work on the preparation of technological solutions for treatment facilities and their complexes
7. Work on the development of special sections of project documentation:
7.1. Engineering and technical measures for civil defense
7.2. Engineering and technical measures to prevent natural and man-made emergencies
7.3. Development of a declaration on industrial safety of hazardous production facilities
7.4. Development of a safety declaration for hydraulic structures
7.5. Development of justification for radiation and nuclear protection
8. Work on the preparation of construction organization projects, demolition and dismantling of buildings and structures, extension of service life and conservation
9. Work on preparing draft environmental protection measures
10. Work on preparing projects for fire safety measures
11. Work on preparing draft measures to ensure access for people with limited mobility
12. Work on the inspection of building structures of buildings and structures
13. Work on organizing the preparation of design documentation, attracted by the developer or customer on the basis of a contract by a legal entity or individual entrepreneur (general designer)
III. Types of construction, reconstruction and major repair work
1. Geodetic work performed on construction sites
1.1. Marking work during construction
1.2. Geodetic control of the accuracy of geometric parameters of buildings and structures
2. Preparatory work
2.1. Dismantling (dismantling) of buildings and structures, walls, ceilings, flights of stairs and other structural and related elements or parts thereof
2.2. Construction of temporary: roads; platforms; engineering networks and structures
2.3. Construction of rail crane tracks and foundations (supports) of stationary cranes
2.4. Installation and dismantling of inventory external and internal scaffolding, technological waste chutes
3. Excavation work
3.1. Mechanized soil development
3.2. Soil development and drainage installation in water management construction
3.3. Soil development using hydromechanization method
3.4. Work on artificial freezing of soils
3.5. Soil compaction with rollers, soil compactors or heavy rammers
3.6. Mechanized loosening and development of permafrost soils
3.7. Work on water reduction, organization of surface runoff and drainage
4. Construction of wells
4.1. Drilling, construction and installation of oil and gas wells
4.2. Drilling and construction of wells (except oil and gas wells)
4.3. Fastening wells with pipes, extracting pipes, freely lowering or lifting pipes from wells
4.4. Grouting works
4.5. Construction of mine wells
5. Piling works. Soil consolidation
5.1. Piling work carried out from the ground, including in sea and river conditions
5.2. Piling work carried out in frozen and permafrost soils
5.3. Arrangement of grillages
5.4. Installation of driven and bored piles
5.5. Thermal strengthening of soils
5.6. Cementation of soil bases with driving injectors
5.7. Silication and resinization of soils
5.8. Work on the construction of structures using the “wall in soil” method.
5.9. Driving and lifting of steel and sheet piles
6. Construction of concrete and reinforced concrete monolithic structures
6.1. Formwork work
6.2. Reinforcement works
6.3. Construction of monolithic concrete and reinforced concrete structures
7. Installation of prefabricated concrete and reinforced concrete structures
7.1. Installation of foundations and structures of the underground part of buildings and structures
7.2. Installation of structural elements of the above-ground part of buildings and structures, including columns, frames, crossbars, trusses, beams, slabs, chords, wall panels and partitions
7.3. Installation of volumetric blocks, including ventilation blocks, elevator shafts and garbage chutes, sanitary cabins
8. Drilling and blasting during construction
9. Work on the installation of stone structures
9.1. Construction of building structures and structures made of natural and artificial stones, including cladding
9.2. Construction of brick structures, including those with cladding
9.3. Construction of heating stoves and hearths
10. Installation of metal structures
10.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures
10.2. Installation, strengthening and dismantling of transport gallery structures
10.3. Installation, strengthening and dismantling of tank structures
10.4. Installation, strengthening and dismantling of mast structures, towers, exhaust pipes
10.5. Installation, strengthening and dismantling of technological structures
10.6. Installation and dismantling of cable-supporting structures (braces, cable-stayed structures, etc.)
11. Installation of wooden structures
11.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures, including glued structures
11.2. Assembly of residential and public buildings from factory-produced parts
12. Protection of building structures, pipelines and equipment (except for main and field pipelines)
12.1. Lining works
12.2. Masonry made of acid-resistant bricks and shaped acid-resistant ceramic products
12.3. Protective coating with paints and varnishes
12.4. Gumming (lining with sheet rubber and liquid rubber mixtures)
12.5. Installation of adhesive insulation
12.6. Installation of metallization coatings
12.7. Applying a face coating when installing a monolithic floor in rooms with aggressive environments
12.8. Antiseptic treatment of wooden structures
12.9. Waterproofing of building structures
12.10. Work on thermal insulation of buildings, building structures and equipment
12.11. Pipeline thermal insulation work
12.12. Fire protection work for building structures and equipment
13. Roof installation
13.1. Installation of roofs made of piece and sheet materials
13.2. Installation of roofs from roll materials
13.3. Installation of self-leveling roofs
14. Facade work
14.1. Surface cladding with natural and artificial stones and linear shaped stones
14.2. Installation of ventilated facades
15. Installation of internal engineering systems and equipment of buildings and structures
15.1. Installation and dismantling of water supply and sewerage systems
15.2. Installation and dismantling of the heating system
15.3. Installation and dismantling of the gas supply system
15.4. Installation and dismantling of the ventilation and air conditioning system
15.5. Power supply system design
15.6. Installation of electrical and other networks for controlling life support systems of buildings and structures
16. Installation of external water supply networks
16.1. Laying water pipelines
16.2. Installation and dismantling of shut-off valves and water supply network equipment
16.3. Construction of water wells, heads, drainage dampers
16.4. Cavity cleaning and testing of water pipes
17. Construction of external sewerage networks
17.1. Laying of non-pressure sewer pipelines
17.2. Laying sewer pressure pipelines
17.3. Installation and dismantling of shut-off valves and sewer network equipment
17.4. Construction of sewer and drainage wells
17.5. Construction of a filter base for sludge beds and filtration fields
17.6. Laying drainage pipes on sludge beds
17.7. Cavity cleaning and testing of sewer pipelines
18. Installation of external heat supply networks
18.1. Laying heating pipelines with coolant temperatures up to 115 degrees Celsius
18.2. Laying heating pipelines with a coolant temperature of 115 degrees Celsius and above
18.3. Installation and dismantling of shut-off valves and equipment of heat supply networks
18.4. Construction of wells and chambers of heat supply networks
18.5. Cavity cleaning and testing of heating pipelines
19. Installation of external gas supply networks, except main ones
19.1. Laying gas pipelines with operating pressure up to 0.005 MPa inclusive
19.2. Laying gas pipelines with operating pressure from 0.005 MPa to 0.3 MPa inclusive
19.3. Laying gas pipelines with operating pressure from 0.3 MPa to 1.2 MPa inclusive (for natural gas), up to 1.6 MPa inclusive (for liquefied petroleum gas)
19.4. Installation of condensate collectors of hydraulic seals and compensators on gas pipelines
19.5. Installation and dismantling of gas control points and installations
19.6. Installation and dismantling of tank and group cylinder liquefied gas plants
19.7. Inserting a gas pipeline into buildings and structures
19.8. Installation and dismantling of gas equipment for consumers using natural and liquefied gas
19.9. Tapping under pressure into existing gas pipelines, disconnecting and plugging under pressure existing gas pipelines
19.10. Cavity cleaning and testing of gas pipelines
20. Construction of external electrical networks
20.1. Construction of power supply networks with voltage up to 1 kV inclusive
20.2. Construction of power supply networks with voltage up to 35 kV inclusive
20.3. Construction of power supply networks with voltage up to 330 kV inclusive
20.4. Construction of power supply networks with voltages over 330 kV
20.5. Installation and dismantling of supports for overhead power lines with voltage up to 35 kV
20.6. Installation and dismantling of supports for overhead power lines with voltage up to 500 kV
20.7. Installation and dismantling of supports for overhead power lines with voltages over 500 kV
20.8. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltage up to 35 kV inclusive
20.9. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltages over 35 kV
20.10. Installation and dismantling of transformer substations and linear electrical equipment with voltage up to 35 kV inclusive
20.11. Installation and dismantling of transformer substations and linear electrical equipment with voltage over 35 kV
20.12. Installation of distribution devices, switching equipment, protection devices
21. Installation of external communication lines, including telephone, radio and television
22. Construction of oil and gas industry facilities
22.1. Installation of main and field pipelines
22.2. Work on the arrangement of oil and gas preparation facilities for transport
22.3. Construction of oil depots and gas storage facilities
22.4. Construction of crossing structures under linear objects (roads and railways) and other obstacles of natural and artificial origin
22.5. Work on the construction of crossings using directional drilling
22.6. Device for electrochemical protection of pipelines
22.7. Tapping under pressure into existing main and field pipelines, disconnecting and plugging under pressure existing main and field pipelines
22.8. Carrying out anti-corrosion protection and insulation work on main and field pipelines
22.9. Work on the development of oil and gas fields on the sea shelf
22.10. Work on the construction of gas filling compressor stations
23.6. Installation of electrical installations, equipment, automation and alarm systems
23.7. Installation of equipment for nuclear power plants
23.8. Installation of equipment for purification and preparation for gas and oil transportation
23.9. Installation of equipment for oil and gas pumping stations and for other product pipelines
23.10. Installation of equipment for liquefied natural gas
23.11. Installation of gas station equipment
23.12. Installation of equipment for ferrous metallurgy enterprises
23.13. Installation of equipment for non-ferrous metallurgy enterprises
23.14. Installation of equipment for the chemical and oil refining industries
23.15. Installation of mining and processing equipment
23.16. Installation of equipment for railway infrastructure facilities
23.17. Installation of subway and tunnel equipment
23.18. Installation of equipment for hydroelectric stations and other hydraulic structures
23.19. Installation of equipment for electrical industry enterprises
23.20. Installation of equipment for construction materials industry enterprises
23.21. Installation of equipment for pulp and paper industry enterprises
23.22. Installation of equipment for textile industry enterprises
23.23. Installation of equipment for printing industry enterprises
23.24. Installation of equipment for food industry enterprises
23.25. Installation of equipment for theatrical and entertainment enterprises
23.26. Installation of equipment for granaries and grain processing enterprises
23.27. Installation of equipment for cinematography enterprises
23.28. Installation of equipment for electronics and communications industry enterprises
23.29. Installation of equipment for healthcare institutions and medical industry enterprises
23.30. Installation of equipment for agricultural production, including fish processing and fish storage
23.31. Installation of equipment for consumer services and utilities
23.32. Installation of water intake equipment, sewerage and treatment facilities
23.33. Installation of communication facilities equipment
23.34. Installation of equipment for space infrastructure facilities
23.35. Installation of airport equipment and other aviation infrastructure facilities
23.36. Installation of equipment for sea and river ports
24. Commissioning work
24.1. Commissioning of lifting and transport equipment
24.2. Commissioning of elevators
24.3. Commissioning of synchronous generators and excitation systems
24.4. Commissioning of power and instrument transformers
24.5. Commissioning of switching devices
24.6. Commissioning of relay protection devices
24.7. Commissioning of automation in power supply
24.8. Commissioning of voltage and operating current systems
24.9. Commissioning of electrical machines and electric drives
24.10. Commissioning of automation systems, alarm systems and interconnected devices
24.11. Commissioning of autonomous systems adjustment
24.12. Commissioning works for complex adjustment of systems
24.13. Commissioning of telemechanics equipment
24.14. Setting up ventilation and air conditioning systems
24.15. Commissioning of automatic machine lines
24.16. Commissioning of multi-purpose metal-cutting machines with CNC
24.17. Commissioning of unique metal-cutting machines weighing over 100 tons
24.18. Commissioning of refrigeration units
24.19. Commissioning of compressor units
24.20. Commissioning of steam boilers
24.21. Commissioning works of hot water heating boilers
24.22. Commissioning of boiler and auxiliary equipment
24.23. Commissioning of water treatment equipment and chemical water treatment equipment
24.24. Commissioning of technological installations of fuel facilities
24.25. Commissioning of the gas-air duct
24.26. Commissioning of general boiler systems and utilities
24.27. Commissioning of equipment for wood processing and finishing
24.28. Commissioning of drying units
24.29. Commissioning works of water supply facilities
24.30. Commissioning works of sewerage structures
24.31. Commissioning works at oil and gas complex facilities
25. Construction of roads and airfields
25.1. Work on the construction of roadbeds for highways, airport aprons, runways, taxiways
25.2. Construction of highway foundations
25.3. Construction of airport apron bases, runways, taxiways
25.4. Construction of road surfaces, including those reinforced with binding materials
25.5. Coatings for airport aprons, runways, and taxiways
25.6. Construction of drainage, catchment, culvert, and spillway devices
25.7. Construction of protective fences and road construction elements
25.8. Road marking device
26. Construction of railway and tram tracks
26.1. Work on the construction of roadbed for railway tracks
26.2. Work on the construction of roadbed for tram tracks
26.3. Construction of the upper structure of the railway track
26.4. Construction of drainage and protective structures for railway subgrades
26.5. Installation of signaling, centralization and blocking of railways
26.6. Electrification of railways
26.7. Consolidation of soils in the railway right-of-way
26.8. Construction of railway crossings
27. Construction of tunnels and subways
27.1. Drilling of tunnels and subways without the use of special excavation methods
27.2. Drilling tunnels and subways using artificial freezing
27.3. Drilling of tunnels and subways using grouting
27.4. Drilling of tunnels and subways using electrochemical consolidation
27.5. Drilling of tunnels and subways using lower support
27.6. Construction of internal structures of tunnels and subways
27.7. Subway track arrangement
28. Construction of mine structures
28.1. Drilling of mine structures without the use of special excavation methods
28.2. Drilling of mine structures using artificial freezing
28.3. Drilling of mine structures using grouting
28.4. Drilling of mine structures using electrochemical consolidation
28.5. Drilling of mine structures using lowering support
29. Construction of bridges, overpasses and overpasses
29.1. Construction of monolithic reinforced concrete and concrete structures of bridges, overpasses and overpasses
29.2. Construction of prefabricated reinforced concrete structures of bridges, overpasses and overpasses
29.3. Construction of pedestrian bridge structures
29.4. Installation of steel spans of bridges, overpasses and overpasses
29.5. Construction of wooden bridges, overpasses and overpasses
29.6. Construction of stone bridges, overpasses and overpasses
29.7. Laying culvert pipes on finished foundations (bases) and drainage trays
30. Hydraulic work, diving work
30.1. Development and movement of soil using hydraulic and floating dredgers
30.2. Loosening and development of soils under water by mechanization and delivery to a dump or floating craft
30.3. Drilling and construction of wells underwater
30.4. Piling work carried out in offshore conditions from floating craft, including installation of shell piles
30.5. Piling work carried out in river conditions from floating craft, including installation of shell piles
30.6. Construction of structures in sea and river conditions from natural and artificial massifs
30.7. Construction of dams
30.8. Installation and dismantling of building structures in underwater conditions
30.9. Subsea pipeline laying
30.10. Laying cables in underwater conditions, including electrical and communications
30.11. Diving (underwater construction) work, including quality control of hydraulic engineering work under water
31. Industrial furnaces and chimneys
31.1. Laying blast furnaces
31.2. Laying the upper structure of glass furnace baths
31.3. Installation of furnaces from prefabricated elements of increased factory readiness
31.4. Electrolysers for the aluminum industry
31.5. Lining of industrial smoke and ventilation furnaces and pipes
32. Work to carry out construction control by a legal entity or individual entrepreneur engaged by a developer or customer on the basis of an agreement
32.1. Construction control of general construction works (groups of types of work No. 1-3, 5-7, 9-14)
32.2. Construction supervision of well development work (group of types of work No. 4)
32.3. Construction control of drilling and blasting operations (group of types of work No. 8)
32.4. Construction supervision of work in the field of water supply and sewerage (type of work No. 15.1, 23.32, 24.29, 24.30, groups of types of work No. 16, 17)
32.5. Construction supervision of work in the field of heat and gas supply and ventilation (types of work No. 15.2, 15.3, 15.4, 23.4, 23.5, 24.14, 24.19, 24.20, 24.21, 24.22, 24.24, 24.25, 24.26, groups of types of work No. 18, 19)
32.6. Construction supervision of work in the field of fire safety (type of work No. 12.3, 12.12, 23.6, 24.10-24.12)
32.7. Construction supervision of work in the field of electrical supply (type of work No. 15.5, 15.6, 23.6, 24.3-24.10, group of types of work No. 20)
32.8. Construction control during construction, reconstruction and major repairs of communication structures (types of work No. 23.33, group of types of work No. 21)
32.9. Construction control during construction, reconstruction and major repairs of oil and gas industry facilities (type of work No. 23.9, 23.10, group of types of work No. 22)
32.10. Construction control during the construction, reconstruction and major repairs of highways and airfields, bridges, overpasses and overpasses (type of work No. 23.35, groups of types of work No. 25, 29)
32.11. Construction control during the installation of railway and tram tracks (types of work No. 23.16, group of types of work No. 26)
32.12. Construction control during construction, reconstruction and major repairs in underground conditions (types of work No. 23.17, groups of types of work No. 27, 28)
32.13. Construction control of hydraulic engineering and diving works (group of types of work No. 30)
32.14. Construction control during construction, reconstruction and overhaul of industrial furnaces and chimneys (group of types of work No. 31)
32.15. Construction control during construction, reconstruction and major repairs of nuclear energy facilities (23.7)
33. Work on organizing construction, reconstruction and major repairs by a legal entity or individual entrepreneur (general contractor) attracted by the developer or customer on the basis of an agreement:
33.1. Industrial engineering
33.1.1. Enterprises and facilities of the fuel industry
33.1.2. Enterprises and facilities of the coal industry
33.1.3. Ferrous metallurgy enterprises and facilities
33.1.4. Non-ferrous metallurgy enterprises and facilities
33.1.5 Enterprises and facilities of the chemical and petrochemical industry
33.1.6 Enterprises and facilities of mechanical engineering and metalworking
33.1.7. Enterprises and facilities of the forestry, woodworking, pulp and paper industries
33.1.8. Light industry enterprises and facilities
33.1.9. Food industry enterprises and facilities
33.1.10. Enterprises and facilities of agriculture and forestry
33.1.11. Thermal power plants
33.1.12. Nuclear energy facilities
33.1.13. Power supply facilities over 110 kV
33.1.14. Oil and gas complex facilities
33.2. Transport construction
33.2.1. Highways and road transport infrastructure facilities
33.2.2. Railways and railway infrastructure facilities
33.2.3. Airports and other aviation infrastructure facilities
33.2.4. Road and railway tunnels
33.2.5. Subways
33.2.6. Bridges (large and medium)
33.2.7. Enterprises and public transport facilities
33.3. Housing and civil construction
33.4. Power supply facilities up to 110 kV inclusive
33.5. Heat supply facilities
33.6. Gas supply facilities
33.7. Water supply and sewerage facilities
33.8. Buildings and structures of communication facilities
33.9. Marine transport facilities
33.10. River transport objects
33.11. Hydropower facilities
33.12. Dams, dams, canals, bank protection structures, reservoirs (except for hydropower facilities)
33.13. Irrigation facilities
_______________________________
* These types and groups of types of work require obtaining a certificate of approval for types of work that affect the safety of a capital construction project, in the case of such work being performed at the facilities specified in Article 48.1Town Planning CodeRussian Federation
Registration N 16902
Pursuant to Part 5 of Article 8 of the Federal Law of July 22, 2008 “On Amendments to the Town Planning Code of the Russian Federation and Certain Legislative Acts of the Russian Federation” (Collected Legislation of the Russian Federation, 2008, No. 30 (Part 1), Article 3604) and in accordance with the Decree of the Government of the Russian Federation of November 19, 2008 N 864 “On measures to implement the Federal Law of July 22, 2008 N 148-FZ “On Amendments to the Town Planning Code of the Russian Federation and certain legislative acts of the Russian Federation” ( Collection of Legislation of the Russian Federation, 2008, N 48, Art. 5612), I order:
1. Approve the attached List of types of work for engineering surveys, for the preparation of design documentation, for construction, reconstruction, major repairs of capital construction projects that affect the safety of capital construction projects ( further - List).
2. Establish that the List does not include types of work on the preparation of design documentation, construction, reconstruction, major repairs in relation to objects for which the issuance of a construction permit is not required in accordance with Part 17 of Article 51 of the Town Planning Code of the Russian Federation (Collection of Legislation Russian Federation, 2005, No. 1, Article 16; 2008, No. 30 (Part 2), Article 3616), as well as in relation to individual housing construction projects (detached residential buildings with no more than three floors, intended for residence of no more than two families); residential buildings with no more than three floors, consisting of several blocks, the number of which does not exceed ten and each of which is intended for one family, has a common wall (common walls) without openings with the neighboring block or neighboring blocks, is located on a separate land plot and has access to public territory (blocked residential buildings); apartment buildings with no more than three floors, consisting of one or more block sections, the number of which does not exceed four, each of which contains several apartments and common areas and each of which has a separate entrance with access to the common area.
3. Recognize as invalid the order of the Ministry of Regional Development of the Russian Federation dated December 9, 2008 N 274 “On approval of the List of types of work for engineering surveys, for the preparation of design documentation, for construction, reconstruction, major repairs of capital construction projects that affect safety capital construction projects" (registered with the Ministry of Justice of Russia on January 16, 2009 N 13086), as well as order of the Ministry of Regional Development of the Russian Federation dated October 21, 2009 N 480 "On amendments to the order of the Ministry of Regional Development of the Russian Federation dated December 9, 2008 N 274 “On approval of the List of types of work for engineering surveys, for the preparation of design documentation, for construction, reconstruction, major repairs of capital construction projects that affect the safety of capital construction projects” (registered with the Ministry of Justice of Russia on December 22, 2009 N 15789) with the moment this order comes into force.
5. Control over the implementation of this Order shall be entrusted to the Deputy Minister of Regional Development of the Russian Federation V.A. Tokarev.
Minister V. Basargin
List of types of work for engineering surveys, preparation of design documentation, construction, reconstruction, major repairs of capital construction projects that affect the safety of capital construction projects
I. Types of engineering survey work
1. Work as part of engineering and geodetic surveys
1.1. Creation of geodetic reference networks
1.2. Geodetic observations of deformations and settlements of buildings and structures, movements of the earth's surface and dangerous natural processes
1.3. Creation and updating of engineering and topographical plans on a scale of 1:200 - 1:5000, including in digital form, surveying of underground communications and structures
1.4. Tracing Linear Features
1.5. Engineering and hydrographic work
1.6. Special geodetic and topographical work during the construction and reconstruction of buildings and structures
2. Work as part of engineering-geological surveys
2.1. Engineering-geological survey on scales 1:500 - 1:25000
2.2. Mining of mine workings with their testing, laboratory studies of the physical and mechanical properties of soils and the chemical properties of groundwater samples
2.3. Study of hazardous geological and engineering-geological processes with the development of recommendations for engineering protection of the territory
2.4. Hydrogeological studies
2.5. Engineering geophysical research
2.6. Engineering and geocryological research
2.7. Seismological and seismotectonic studies of the territory, seismic microzoning
3. Work as part of engineering and hydrometeorological surveys
3.1. Meteorological observations and study of the hydrological regime of water bodies
3.2. Study of dangerous hydrometeorological processes and phenomena with calculations of their characteristics
3.3. Study of channel processes of water bodies, deformations and reworking of banks
3.4. Research of the ice regime of water bodies
4. Work as part of engineering and environmental surveys
4.1. Engineering and environmental survey of the territory
4.2. Research of chemical contamination of soils, surface and groundwater, atmospheric air, sources of pollution
4.3. Laboratory chemical-analytical and gas-chemical studies of samples and soil and water samples
4.4. Research and assessment of physical impacts and radiation conditions in the territory
4.5. Study of vegetation, fauna, sanitary-epidemiological and medical-biological studies of the territory*
5. Work as part of engineering and geotechnical surveys
(Performed as part of engineering-geological surveys or separately on the territory studied in engineering-geological terms for individual buildings and structures)
5.1. Drilling of mine workings with their testing and laboratory studies of the mechanical properties of soils with the determination of characteristics for specific schemes for calculating foundations
5.2. Field testing of soils with determination of their standard strength and deformation characteristics (stamp, shear, pressureometric, shear). Testing of reference and full-scale piles
5.3. Determination of standard mechanical characteristics of soils using static, dynamic and drilling sounding methods
5.4. Physical and mathematical modeling of the interaction of buildings and structures with the geological environment
5.5. Special studies of soil characteristics using separate programs for non-standard, including non-linear methods for calculating foundations and structures of buildings and structures
5.6. Geotechnical control of the construction of buildings, structures and adjacent areas
6. Inspection of the condition of soils at the base of buildings and structures
7. Work on organizing engineering surveys by a developer engaged on the basis of a contract or a legal entity authorized by him or an individual entrepreneur (general contractor)
II. Types of work on the preparation of project documentation
1. Work on preparing a scheme for the planning organization of a land plot:
1.1 Work on preparing a master plan for the land plot
1.2. Work on preparing a layout plan for the route of a linear facility
1.3. Work on preparing a planning organization scheme for the right-of-way of a linear structure
2. Work on the preparation of architectural solutions
3. Work on preparing constructive solutions
4. Work on the preparation of information on internal engineering equipment, internal networks of engineering support, on the list of engineering activities:
4.1. Work on the preparation of projects for internal engineering systems of heating, ventilation, air conditioning, smoke ventilation, heat supply and cold supply
4.2. Work on the preparation of projects for internal engineering systems of water supply and sewerage
4.3. Work on the preparation of designs for internal power supply systems*
4.4. Work on the preparation of designs for internal low-current systems*
4.5. Work on the preparation of projects for internal dispatching, automation and management of engineering systems
4.6. Work on preparing projects for internal gas supply systems
5. Work on preparing information on external networks of engineering support, on the list of engineering activities:
5.1. Work on the preparation of projects for external heat supply networks and their structures
5.2. Work on the preparation of projects for external water supply and sewerage networks and their structures
5.3. Work on the preparation of projects for external power supply networks up to 35 kV inclusive and their structures
5.4. Work on the preparation of projects for external power supply networks of no more than 110 kV inclusive and their structures
5.5. Work on the preparation of projects for external power supply networks of 110 kV and more and their structures
5.6. Work on the preparation of projects for external networks of low-current systems
5.7. Work on the preparation of projects for external gas supply networks and their structures
6. Work on preparing technological solutions:
6.1. Work on the preparation of technological solutions for residential buildings and their complexes
6.2. Work on the preparation of technological solutions for public buildings and structures and their complexes
6.3. Work on the preparation of technological solutions for industrial buildings and structures and their complexes
6.4. Work on the preparation of technological solutions for transport facilities and their complexes
6.5. Work on the preparation of technological solutions for hydraulic structures and their complexes
6.6. Work on the preparation of technological solutions for agricultural facilities and their complexes
6.7. Work on the preparation of technological solutions for special-purpose objects and their complexes
6.8. Work on the preparation of technological solutions for oil and gas facilities and their complexes
6.9. Work on the preparation of technological solutions for waste collection, processing, storage, processing and disposal facilities and their complexes
6.10. Work on the preparation of technological solutions for nuclear energy and industrial facilities and their complexes
6.11. Work on the preparation of technological solutions for military infrastructure facilities and their complexes
6.12. Work on the preparation of technological solutions for treatment facilities and their complexes
7. Work on the development of special sections of project documentation:
7.1. Engineering and technical measures for civil defense
7.2. Engineering and technical measures to prevent natural and man-made emergencies
7.3. Development of a declaration on industrial safety of hazardous production facilities
7.4. Development of a safety declaration for hydraulic structures
7.5. Development of justification for radiation and nuclear protection
8. Work on the preparation of construction organization projects, demolition and dismantling of buildings and structures, extension of service life and conservation*
9. Work on preparing draft environmental protection measures
10. Work on preparing projects for fire safety measures
11. Work on preparing draft measures to ensure access for people with limited mobility
12. Work on the inspection of building structures of buildings and structures
13. Work on organizing the preparation of design documentation, attracted by the developer or customer on the basis of a contract by a legal entity or individual entrepreneur (general designer)
III. Types of construction, reconstruction and major repair work
1. Geodetic work performed on construction sites
1.1. Layout work during construction*
1.2. Geodetic control of the accuracy of geometric parameters of buildings and structures*
2. Preparatory work
2.1. Dismantling (dismantling) of buildings and structures, walls, ceilings, flights of stairs and other structural and related elements or parts thereof*
2.2. Construction of temporary: roads; platforms; engineering networks and structures*
2.3. Construction of rail crane tracks and foundations (supports) of stationary cranes
2.4. Installation and dismantling of external and internal inventory scaffolding, technological waste chutes*
3. Excavation work
3.1. Mechanized soil development*
3.2. Soil development and drainage installation in water management construction
3.3. Soil development using hydromechanization method
3.4. Work on artificial freezing of soils
3.5. Soil compaction with rollers, soil compactors or heavy rammers*
3.6. Mechanized loosening and development of permafrost soils
3.7. Work on water reduction, organization of surface runoff and drainage
4. Construction of wells
4.1. Drilling, construction and installation of oil and gas wells
4.2. Drilling and construction of wells (except oil and gas wells)
4.3. Fastening wells with pipes, extracting pipes, freely lowering or lifting pipes from wells
4.4. Grouting works
4.5. Construction of mine wells
5. Piling works. Soil consolidation
5.1. Piling work carried out from the ground, including in sea and river conditions
5.2. Piling work carried out in frozen and permafrost soils
5.3. Arrangement of grillages
5.4. Installation of driven and bored piles
5.5. Thermal strengthening of soils
5.6. Cementation of soil bases with driving injectors
5.7. Silication and resinization of soils
5.8. Work on the construction of structures using the “wall in soil” method.
5.9. Driving and lifting of steel and sheet piles
6. Construction of concrete and reinforced concrete monolithic structures
6.1. Formwork work
6.2. Reinforcement works
6.3. Construction of monolithic concrete and reinforced concrete structures
7. Installation of prefabricated concrete and reinforced concrete structures
7.1. Installation of foundations and structures of the underground part of buildings and structures
7.2. Installation of structural elements of the above-ground part of buildings and structures, including columns, frames, crossbars, trusses, beams, slabs, chords, wall panels and partitions
7.3. Installation of volumetric blocks, including ventilation blocks, elevator shafts and garbage chutes, sanitary cabins
8. Drilling and blasting during construction
9. Work on the installation of stone structures
9.1. Construction of building structures and structures made of natural and artificial stones, including cladding*
9.2. Construction of brick structures, including those with cladding*
9.3. Construction of heating stoves and hearths*
10. Installation of metal structures
10.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures
10.2. Installation, strengthening and dismantling of transport gallery structures
10.3. Installation, strengthening and dismantling of tank structures
10.4. Installation, strengthening and dismantling of mast structures, towers, exhaust pipes
10.5. Installation, strengthening and dismantling of technological structures
10.6. Installation and dismantling of cable-supporting structures (braces, cable-stayed structures, etc.)
11. Installation of wooden structures
11.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures, including glued structures *
11.2. Assembly of residential and public buildings from pre-fabricated parts supplied*
12. Protection of building structures, pipelines and equipment (except for main and field pipelines)
12.1. Lining works
12.2. Masonry made of acid-resistant bricks and shaped acid-resistant ceramic products
12.3. Protective coating with paints and varnishes*
12.4. Gumming (lining with sheet rubber and liquid rubber mixtures)
12.5. Installation of adhesive insulation
12.6. Installation of metallization coatings
12.7. Applying a face coating when installing a monolithic floor in rooms with aggressive environments
12.8. Antiseptic treatment of wooden structures
12.9. Waterproofing of building structures
12.10. Work on thermal insulation of buildings, building structures and equipment
12.11. Pipeline thermal insulation work*
12.12. Fire protection work for building structures and equipment
13. Roof installation
13.1. Installation of roofs made of piece and sheet materials*
13.2. Installation of roofs from roll materials*
13.3. Installation of self-leveling roofs*
14. Facade work
14.1. Surface cladding with natural and artificial stones and linear shaped stones*
14.2. Installation of ventilated facades*
15. Installation of internal engineering systems and equipment of buildings and structures
15.1. Installation and dismantling of water supply and sewerage systems*
15.2. Installation and dismantling of the heating system*
15.3. Installation and dismantling of the gas supply system
15.4. Installation and dismantling of the ventilation and air conditioning system*
15.5. Power supply system*
15.6. Installation of electrical and other networks for controlling life support systems of buildings and structures*
16. Installation of external water supply networks
16.1. Laying water pipelines
16.2. Installation and dismantling of shut-off valves and water supply network equipment
16.3. Construction of water wells, heads, drainage dampers
16.4. Cavity cleaning and testing of water pipes
17. Construction of external sewerage networks
17.1. Laying of non-pressure sewer pipelines
17.2. Laying sewer pressure pipelines
17.3. Installation and dismantling of shut-off valves and sewer network equipment
17.4. Construction of sewer and drainage wells
17.5. Construction of a filter base for sludge beds and filtration fields
17.6. Laying drainage pipes on sludge beds
17.7. Cavity cleaning and testing of sewer pipelines
18. Installation of external heat supply networks
18.1. Laying heating pipelines with coolant temperatures up to 115 degrees Celsius
18.2. Laying heating pipelines with a coolant temperature of 115 degrees Celsius and above
18.3. Installation and dismantling of shut-off valves and equipment of heat supply networks
18.4. Construction of wells and chambers of heat supply networks
18.5. Cavity cleaning and testing of heating pipelines
19. Installation of external gas supply networks, except main ones
19.1. Laying gas pipelines with operating pressure up to 0.005 MPa inclusive
19.2. Laying gas pipelines with operating pressure from 0.005 MPa to 0.3 MPa inclusive
19.3. Laying gas pipelines with operating pressure from 0.3 MPa to 1.2 MPa inclusive (for natural gas), up to 1.6 MPa inclusive (for liquefied petroleum gas)
19.4. Installation of condensate collectors of hydraulic seals and compensators on gas pipelines
19.5. Installation and dismantling of gas control points and installations
19.6. Installation and dismantling of tank and group cylinder liquefied gas plants
19.7. Inserting a gas pipeline into buildings and structures
19.8. Installation and dismantling of gas equipment for consumers using natural and liquefied gas
19.9. Tapping under pressure into existing gas pipelines, disconnecting and plugging under pressure existing gas pipelines
19.10. Cavity cleaning and testing of gas pipelines
20. Construction of external electrical networks
20.1. Construction of power supply networks with voltage up to 1 kV inclusive*
20.2. Construction of power supply networks with voltage up to 35 kV inclusive
20.3. Construction of power supply networks with voltage up to 330 kV inclusive
20.4. Construction of power supply networks with voltages over 330 kV
20.5. Installation and dismantling of supports for overhead power lines with voltage up to 35 kV
20.6. Installation and dismantling of supports for overhead power lines with voltage up to 500 kV
20.7. Installation and dismantling of supports for overhead power lines with voltages over 500 kV
20.8. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltage up to 35 kV inclusive
20.9. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltages over 35 kV
20.10. Installation and dismantling of transformer substations and linear electrical equipment with voltage up to 35 kV inclusive
20.11. Installation and dismantling of transformer substations and linear electrical equipment with voltage over 35 kV
20.12. Installation of distribution devices, switching equipment, protection devices
21. Installation of external communication lines, including telephone, radio and television*
22. Construction of oil and gas industry facilities
22.1. Installation of main and field pipelines
22.2. Work on the arrangement of oil and gas preparation facilities for transport
22.3. Construction of oil depots and gas storage facilities
22.4. Construction of crossing structures under linear objects (roads and railways) and other obstacles of natural and artificial origin
22.5. Work on the construction of crossings using directional drilling
22.6. Device for electrochemical protection of pipelines
22.7. Tapping under pressure into existing main and field pipelines, disconnecting and plugging under pressure existing main and field pipelines
22.8. Carrying out anti-corrosion protection and insulation work on main and field pipelines
22.9. Work on the development of oil and gas fields on the sea shelf
22.10. Work on the construction of gas filling compressor stations
22.11. Quality control of welded joints and their insulation
22.12. Cavity cleaning and testing of main and field pipelines
23. Installation work
23.1. Installation of lifting and transport equipment
23.2. Elevator installation
23.3. Installation of equipment for thermal power plants
23.4. Installation of boiler room equipment
23.5. Installation of compressor units, pumps and fans*
23.6. Installation of electrical installations, equipment, automation and alarm systems*
23.7. Installation of equipment for nuclear power plants
23.8. Installation of equipment for purification and preparation for gas and oil transportation
23.9. Installation of equipment for oil and gas pumping stations and for other product pipelines
23.10. Installation of equipment for liquefied natural gas
23.11. Installation of gas station equipment
23.12. Installation of equipment for ferrous metallurgy enterprises
23.13. Installation of equipment for non-ferrous metallurgy enterprises
23.14. Installation of equipment for the chemical and oil refining industries
23.15. Installation of mining and processing equipment
23.16. Installation of equipment for railway infrastructure facilities
23.17. Installation of subway and tunnel equipment
23.18. Installation of equipment for hydroelectric stations and other hydraulic structures
23.19. Installation of equipment for electrical industry enterprises
23.20. Installation of equipment for construction materials industry enterprises
23.21. Installation of equipment for pulp and paper industry enterprises
23.22. Installation of equipment for textile industry enterprises
23.23. Installation of equipment for printing industry enterprises
23.24. Installation of equipment for food industry enterprises*
23.25. Installation of equipment for theatrical and entertainment enterprises
23.26. Installation of equipment for granaries and grain processing enterprises
23.27. Installation of equipment for cinematography enterprises*
23.28. Installation of equipment for electronics and communications industry enterprises*
23.29. Installation of equipment for healthcare institutions and medical industry enterprises*
23.30. Installation of equipment for agricultural production, including fish processing and fish storage*
23.31. Installation of equipment for consumer services and utilities*
23.32. Installation of water intake equipment, sewerage and treatment facilities
23.33. Installation of equipment for communication facilities*
23.34. Installation of equipment for space infrastructure facilities
23.35. Installation of airport equipment and other aviation infrastructure facilities
23.36. Installation of equipment for sea and river ports
24. Commissioning work
24.1. Commissioning of lifting and transport equipment
24.2. Commissioning of elevators
24.3. Commissioning of synchronous generators and excitation systems
24.4. Commissioning of power and instrument transformers
24.5. Commissioning of switching devices
24.6. Commissioning of relay protection devices
24.7. Commissioning of automation in power supply*
24.8. Commissioning of voltage and operating current systems
24.9. Commissioning of electrical machines and electric drives
24.10. Commissioning of automation systems, alarm systems and interconnected devices*
24.11. Commissioning of autonomous systems*
24.12. Commissioning works for complex adjustment of systems*
24.13. Commissioning of telemechanics*
24.14. Adjustment of ventilation and air conditioning systems*
24.15. Commissioning of automatic machine lines
24.16. Commissioning of multi-purpose metal-cutting machines with CNC
24.17. Commissioning of unique metal-cutting machines weighing over 100 tons
24.18. Commissioning of refrigeration units*
24.19. Commissioning of compressor units
24.20. Commissioning of steam boilers
24.21. Commissioning works of hot water heating boilers*
24.22. Commissioning of boiler and auxiliary equipment*
24.23. Commissioning of water treatment equipment and chemical water treatment equipment
24.24. Commissioning of technological installations of fuel facilities
24.25. Commissioning of the gas-air duct
24.26. Commissioning of general boiler systems and utilities
24.27. Commissioning of equipment for wood processing and finishing
24.28. Commissioning of drying units
24.29. Commissioning works of water supply facilities
24.30. Commissioning works of sewerage structures
24.31. Commissioning works at oil and gas complex facilities
25. Construction of roads and airfields
25.1. Work on the construction of roadbeds for highways, airport aprons, runways, taxiways
25.2. Construction of highway foundations
25.3. Construction of airport apron bases, runways, taxiways
25.4. Construction of road surfaces, including those reinforced with binding materials
25.5. Coatings for airport aprons, runways, and taxiways
25.6. Construction of drainage, catchment, culvert, and spillway devices
25.7. Construction of protective fences and road construction elements
25.8. Road marking device
26. Construction of railway and tram tracks
26.1. Work on the construction of roadbed for railway tracks
26.2. Work on the construction of roadbed for tram tracks
26.3. Construction of the upper structure of the railway track
26.4. Construction of drainage and protective structures for railway subgrades
26.5. Installation of signaling, centralization and blocking of railways
26.6. Electrification of railways
26.7. Consolidation of soils in the railway right-of-way
26.8. Construction of railway crossings
27. Construction of tunnels and subways
27.1. Drilling of tunnels and subways without the use of special excavation methods
27.2. Drilling tunnels and subways using artificial freezing
27.3. Drilling of tunnels and subways using grouting
27.4. Drilling of tunnels and subways using electrochemical consolidation
27.5. Drilling of tunnels and subways using lower support
27.6. Construction of internal structures of tunnels and subways
27.7. Subway track arrangement
28. Construction of mine structures
28.1. Drilling of mine structures without the use of special excavation methods
28.2. Drilling of mine structures using artificial freezing
28.3. Drilling of mine structures using grouting
28.4. Drilling of mine structures using electrochemical consolidation
28.5. Drilling of mine structures using lowering support
29. Construction of bridges, overpasses and overpasses
29.1. Construction of monolithic reinforced concrete and concrete structures of bridges, overpasses and overpasses
29.2. Construction of prefabricated reinforced concrete structures of bridges, overpasses and overpasses
29.3. Construction of pedestrian bridge structures
29.4. Installation of steel spans of bridges, overpasses and overpasses
29.5. Construction of wooden bridges, overpasses and overpasses
29.6. Construction of stone bridges, overpasses and overpasses
29.7. Laying culvert pipes on finished foundations (bases) and drainage trays
30. Hydraulic work, diving work
30.1. Development and movement of soil using hydraulic monitors and floating earth projectiles
30.2. Loosening and development of soils under water by mechanization and delivery to a dump or floating craft
30.3. Drilling and construction of wells underwater
30.4. Piling work carried out in offshore conditions from floating craft, including installation of shell piles
30.5. Piling work carried out in river conditions from floating craft, including installation of shell piles
30.6. Construction of structures in sea and river conditions from natural and artificial massifs
30.7. Construction of dams
30.8. Installation and dismantling of building structures in underwater conditions
30.9.Laying pipelines in underwater conditions
30.10. Laying cables in underwater conditions, including electrical and communications
30.11. Diving (underwater construction) work, including quality control of hydraulic engineering work under water
31. Industrial furnaces and chimneys
31.1. Laying blast furnaces
31.2. Laying the upper structure of glass furnace baths
31.3. Installation of furnaces from prefabricated elements of increased factory readiness
31.4. Electrolysers for the aluminum industry
31.5. Lining of industrial smoke and ventilation furnaces and pipes
32. Work to carry out construction control by a legal entity or individual entrepreneur engaged by a developer or customer on the basis of an agreement
32.1. Construction control of general construction works (groups of types of work N 1-3, 5-7, 9-14)
32.2. Construction supervision of well development work (group of types of work No. 4)
32.3. Construction control of drilling and blasting operations (group of types of work No. 8)
32.4. Construction supervision of work in the field of water supply and sewerage (type of work N 15.1, 23.32, 24.29, 24.30, groups of types of work N 16, 17)
32.5. Construction control of work in the field of heat and gas supply and ventilation (types of work N 15.2, 15.3, 15.4, 23.4, 23.5, 24.14, 24.19, 24.20, 24.21, 24.22, 24.24, 24.25, 24.26, groups of types of work N 18, 19)
32.6. Construction supervision of work in the field of fire safety (type of work N 12.3, 12.12, 23.6, 24.10-24.12)
32.7. Construction supervision of work in the field of electrical supply (type of work N 15.5, 15.6, 23.6, 24.3-24.10, group of types of work N 20)
32.8. Construction control during construction, reconstruction and major repairs of communication structures (types of work N 23.33, group of types of work N 21)
32.9. Construction control during construction, reconstruction and major repairs of oil and gas industry facilities (type of work N 23.9, 23.10, group of types of work N 22)
32.10. Construction control during the construction, reconstruction and major repairs of highways and airfields, bridges, overpasses and overpasses (type of work N 23.35, groups of types of work N 25, 29)
32.11. Construction control during the installation of railway and tram tracks (types of work N 23.16, group of types of work N 26)
32.12. Construction control during construction, reconstruction and major repairs in underground conditions (types of work N 23.17, groups of types of work N 27, 28)
32.13. Construction control of hydraulic engineering and diving works (group of types of work N 30)
32.14. Construction control during construction, reconstruction and overhaul of industrial furnaces and chimneys (group of types of work N 31)
32.15. Construction control during construction, reconstruction and major repairs of nuclear energy facilities (23.7)
33. Work on organizing construction, reconstruction and major repairs by a legal entity or individual entrepreneur (general contractor) attracted by the developer or customer on the basis of an agreement:
33.1. Industrial engineering
33.1.1. Enterprises and facilities of the fuel industry
33.1.2. Enterprises and facilities of the coal industry
33.1.3. Ferrous metallurgy enterprises and facilities
33.1.4. Non-ferrous metallurgy enterprises and facilities
33.1.5 Enterprises and facilities of the chemical and petrochemical industry
33.1.6 Enterprises and facilities of mechanical engineering and metalworking
33.1.7. Enterprises and facilities of the forestry, woodworking, pulp and paper industries
33.1.8. Light industry enterprises and facilities*
33.1.9. Food industry enterprises and facilities*
33.1.10. Enterprises and facilities of agriculture and forestry*
33.1.11. Thermal power plants
33.1.12. Nuclear energy facilities
33.1.13. Power supply facilities over 110 kV
33.1.14. Oil and gas complex facilities
33.2. Transport construction
33.2.1. Highways and road transport infrastructure facilities
33.2.2. Railways and railway infrastructure facilities
33.2.3. Airports and other aviation infrastructure facilities
33.2.4. Road and railway tunnels
33.2.5. Subways
33.2.6. Bridges (large and medium)
33.2.7. Enterprises and public transport facilities*
33.3. Housing and civil construction
33.4. Power supply facilities up to 110 kV inclusive
33.5. Heat supply facilities
33.6. Gas supply facilities
33.7. Water supply and sewerage facilities
33.8. Buildings and structures of communication facilities
33.9. Marine transport facilities
33.10. River transport objects
33.11. Hydropower facilities
33.12. Dams, dams, canals, bank protection structures, reservoirs (except for hydropower facilities)
33.13. Irrigation facilities
* These types and groups of types of work require obtaining a certificate of approval for types of work that affect the safety of a capital construction project, in the case of such work being performed at the facilities specified in Article 48.1 of the Town Planning Code of the Russian Federation