We make a screen of plastic pipes for a kindergarten with our own hands. Screen from pvc pipes for kindergarten Screen in kindergarten from pipes

Decorative partitions (screens) have been used since antiquity. But in order to enjoy such a product, it is not necessary to buy it ready-made. You just need to know how to do everything competently and quickly.

Types of structures

It is appropriate to start a conversation with traditional japanese screen... This style is suitable for any home, kept in the appropriate spirit. Byobu (this is how they call their classic partition in Japan) is often decorated with paintings on both sides. The image is thought out in such a way that it is comfortable to study it while sitting on the floor. This design is great for limiting a secluded space.

It is more difficult to imitate Indian screens. They use precious teak wood and other elite tree species.

Later in Europe, the partitions were changed according to the dominant style. This is how performances appeared in the spirit:

classicism;
baroque;
modern;
provence;
hi-tech.

People often use folding (or rather, sliding sash) screens. They are formed by several interconnected frames, usually 3-8 of them. Occasionally there are more frames. This design folds like an accordion and retracts as needed. Single-screen screens (in which there is only one wide sash) are also widely used.

The material inside the sash is selected at your discretion. Most often, the product is equipped with wheels that facilitate rolling to the desired location. The "book" type construction is formed by a pair of flaps of the same size. However, some modifications may be slightly asymmetrical.

The "book" is useful for dressing up, and for festive or home photo sessions.

Flexible screens deserve attention. For them, a lot of long, but differing in small thickness, sections are made. Such sections are created from rails, pipes, and plates. It will be possible to deliver the finished product in the manner of a spiral or even a roll. This, of course, also makes storage and transport easier.

A blind screen is made from a different number of doors. But in any case, they are completely opaque. This is very convenient for all sorts of delicate things, for example, the same dressing. However, as a partition in a room, a blind screen turns out to be very good.

There are also transparent versions- they are used mainly for decoration and in amateur (and professional too) photography.

What materials can you make?

The wooden screen is a real classic. Now it is no longer possible to establish what the very first structure of this kind in history was made of. But there is no doubt that wood is traditional and was used already in hoary antiquity. Along with monolithic boards, partitions in the past were also made of slats. In the second case, various types of fabric were pulled over them - what was at hand and what they liked.

Today, wooden screens are still in demand, and the main types are still the same. But, along with simple slats, timber is often used. Plywood designs have also gained considerable popularity, since they:

allows you to save;
weighs relatively little;
processed without unnecessary problems.

Design developments do not stand still. AND lately, screens from blind doors have begun to be encountered more and more often(and just out of unnecessary wooden doors). They usually still contain quite solid wood, but the structure itself is morally or technically outdated.

Screens with a wooden base are installed both in houses and on the street. In addition to the frames themselves, various types of decorative panels are used, which significantly improve the appearance.

But some home craftsmen try to use metal (usually stainless steel or aluminum). In this case, you will need a frame of a certain shape. Any experienced welder can make it, although sometimes it is better to contact a metalworking company. Insert inside the frame:

wooden panels;
sheet glass;
plastic.

Important: you should avoid using sheet metal, which looks bulky and deprives the room of comfort. It is much better to use a complex ornament made of forged rods.

Instead of them, medium-sized (up to 5 cm in diameter) pipes are also suitable. Tubular screens are widely used in gardens and courtyards. Regardless of the shape of the frame, it should be covered with an elegant fabric or paper with an original image.

Important: paper is used only when the screen is placed indoors or at least under a canopy. In any open place, the first rain will destroy it.

If a high-tech style is chosen, then it is logical to use blinds for framing a steel screen with your own hands. But those who want to simplify their work as much as possible should abandon metal and focus on PVC. Pipes made of this material are quite lightweight and, in addition, practical.

And you can also apply in work:

cardboard;
polymer panels;
cane;
willow or bamboo branches;
CDs or vinyl records.

Required tools

Most often it is enough for work such a set of tools:

drill;
screwdriver;
special stapler;
roulette;
marker;
saw on wood;
saw for metal;
sandpaper of any fraction;
paints (varnishes) and brushes for their application.

Manufacturing instruction

Consider the options for making screens from various materials.

Made of wood

It is quite simple to make a wooden screen for a summer residence yourself. The classic version of such a product is assembled from fabric and a wooden base. The fabric is simply pulled over the frame. By varying the specific pattern and color of the canvas, it is easy to adapt the "homemade" for any room. To work with a bar, along with the tools listed above, you will need a dozen more door hinges, 96 screws, strong and beautiful fabric, universal glue, decor of your choice.

You can make a full-size screen using 24 bars 6 cm wide and 2 cm thick. In half of the bars, the length should be 1.7 m, and in the other half - 0.6 m. On the slats 6 cm from the edge, lines are drawn and the excess is sawn off exactly along the marks.

Important: the cuts should reach exactly half the width of the planks - no less and no more.

The next step in making a homemade room screen is to cut the edges of the slats with a chisel. The wood is removed in layers, up to the cuts. From the inside, the cuttings are covered with glue. After assembling them into a single frame, the entire workpiece is pressed tightly. Only after the glue has completely set can you continue to work.

When sanding wood with emery, special attention is paid to all joints. Then the varnish is used. For your information: Regardless of the number of leaves, ordinary steel corners can be used instead of door hinges. The fasteners are fixed with a screwdriver. After that, it remains to decorate the screen with a cloth, choosing it at your discretion.

Be sure to make a pattern, in addition to the dimensions of the frames, take into account excesses, difficult places. The use of multi-colored and heterogeneous fabrics is allowed. In order not to sew it with your own hands and a needle, it is better to use a sewing machine. She will also help to sew the edges. The attachment of matter to the frames is performed with a construction stapler from top to bottom; at the same time, they carefully monitor that everything is tensioned perfectly.

They work with the sidewalls after attaching the fabric from the top and bottom. When it's ready, two hinges or corners for each joint connect the parts of the screen. It is this amount of fasteners that is considered optimal for the convenience of folding the partition.

Attention: when choosing a fabric, take into account the style of the room. The tree should be selected as carefully as possible so that there are no even small defects.

Made of cardboard

But if you need to make a screen for the bedroom yourself, then it is better to use cardboard. A mobile partition of a modular type will not externally overload the space. It is enough to cut out any details you like according to the scheme and fasten them into a single canvas. If necessary, such a screen is easy to remake at your own discretion.

Parts can be fastened not only straight or at an angle, but also in waves. The only negative: they are completely unsuitable for the street, they can deteriorate from moisture, wind and sun.

For a serious screen on a large area (in the office or in all rooms of the house at once), binding cardboard, corrugated cardboard are used. The color of the starting material is irrelevant. For the supporting part, high-density cardboard is used.

Another option is to use a TV box, refrigerator or washing machine. Then the sidewalls are cut off and the place where the first and fourth faces converge are removed. The second of the three seams of the rectangle is bent in the opposite direction to ensure the rigidity of the screen when unfolded.

From plastic pipes

The creation of a screen made of PVC and polypropylene pipes does not have any significant differences. It can be any pipes - heating, plumbing, sewer - as long as they are strong. Such products are suitable for mobile and fixed, transparent and opaque partitions. The transparent version implies fastening the pipes together and stretching a light matter on them. Sometimes they even take starched gauze.

Pipes can be connected in a flange way, that is, with fittings. Before starting work, the edges must be cleaned. Putting the fittings on the cuts, put on a gasket with a rubber layer inside, and the flanges are already pulled over this gasket. Sometimes counter bolts and counter flanges are used.

Important: all fasteners should be tightened uniformly, otherwise the reinforcement will not fit. If necessary, the structure can be easily disassembled. But when assembled, it is extremely stable.

An alternative is pipe bonding. All connected elements are freed from chamfers, and then covered with special marks. From the markings, it is easy to understand to what depth to screw the flange. Of course, 100% of the parts are degreased. Glue is applied to the clean surface from the inside of the socket, to the chamfers and pipes. Then the pipes are inserted into sockets or fittings, unfolded by ¼ of a turn and clamped for 60 seconds.

Attention: all these manipulations must be done as quickly and accurately as possible; any excess glue is removed immediately. The glue will dry in a few hours. Despite the laboriousness, this method of creating a wireframe is slightly more reliable than the previous method.

There is another option - the use of a rubber seal. It is available at any socket at the end. The rubber seal allows the pipes to be connected quickly, easily and absolutely tightly.

The surfaces need to be cleaned as best as possible. On a smooth area, get rid of the chamfer. Then a mark is made to show how deep the pipe will go into the socket. All smooth spots are coated with silicone. Further, the structure is assembled. Despite the simplicity and ease of dismantling, such a product will not be particularly durable.

If the screen will be made with wheels, they are attached to self-tapping screws. It is advisable to use a weighting agent that is placed on the bottom of the base. It must be fastened with self-tapping screws and holders. Flanges for inserting pipes are placed on top. There are several more vertical elements above the horizontal pipe; when the assembly is complete, the structure is often painted.

An interesting option is plastic screens made of pipes cut into rings.

Important: whenever possible, it is better to cut pipes to size on special machines. The width of the plastic screens is about 5 cm. If it should be smaller for some reason, you will need to work with an improvised tool. It is recommended to mark on the surface every 5 cm. The workpieces are clamped in a vice and cut with a hand saw.

Important: the paper is removed immediately, otherwise it will be impossible to remove it. The rings are connected with glue; before that, the workpieces are laid out on the floor in order to clearly see what to do with what and in what order.

Rings must be placed from larger to smaller; the pattern is selected to your liking. The edges are usually flattened, but they can be bent. Of course, all this is thought out in advance. Apart from their structural role, the rings are suitable for storing small items. The screen itself is made both mobile and fixed to the wall.

An alternative version of a plastic screen consists of the following parts:

a set of wheels for furniture;
steel pipe as a weighting agent;
pipes on the frame;
paints and brushes;
fasteners;
flanges;
board.

The frame is assembled in the same way as in other options. Attention should be paid to choosing a good paint. Before applying it, all surfaces are degreased and cleaned. All metal parts are covered with anti-corrosion protection. The finished structure is easy to repaint.

The creative development of preschoolers in kindergarten is one of the important stages in the formation of a growing personality.

The setting of the group, the surrounding objects contribute to curiosity, creativity, bold attempts and discoveries.

Taking into account the fact that the child spends most of the daytime in a group, the surrounding space and the interior in it become part of the play and educational process. The more opportunities children to realize their own fantasies, the easier it is for the teacher to direct the learning process in the right direction.

The child treats objects and space as a resource, seeing in them opportunities for the realization of his plan.

One of the interior details that can help in the creative development and organization of the group's life is stylized... Being an important attribute of theatrical performances with a touch of mystery, it arouses genuine delight and curiosity in kids.

The simplest puppet theater attracts kids much more than drawn fictional characters.

Depending on the size, using screens you can stage scenes both for the puppet theater and for real little actors, adding to the entertainment process and increasing interest.

The screen in this case becomes an urgently needed item.

If the group's budget does not allow purchasing a ready-made version, and the desire to organize a theater group from children yes - you can make it yourself do-it-yourself plastic pipe screen for kindergarten.

The construction of this multifunctional device is very simple.

Depending on the purpose of use and age children various designs can be made.

It can be a large, full-length theater screen.

Or a small desktop version of the screen to independently show scenes with puppet characters.

An important factor is the lightness and versatility of the structure: children they appreciate the rare opportunity to independently change the arrangement of interior items, using them not as a mandatory established order, but as a resource for the implementation of ideas.

This develops management skills as well as more room for play and creativity.

Typically the standard model pvc pipe screens done with three sections.

It is enough to assemble 3 frames, connect them together and close them with beautifully designed curtains.

However, this is not a mandatory rule, and if desired and available material more framework components can be made. The design of the fabric stretched over the frame depends only on personal preferences - you can choose it together with children of several options by making removable covers with Velcro fasteners.

When choosing covers, you can show your imagination and creativity.

Various color solutions of covers can be associated with seasons or themed holidays. For example, a green background in spring, yellow and orange - with the onset of autumn, blue or blue - in the winter season.

Here for the teacher there is a large field for imagination.

Materials and tools

Making a screen from plastic pipes with your own hands does not require large expenses. You will need propylene pipes of various lengths, plastic corners and double-sided fasteners - for connecting the sections to each other.

All this can be taken after a recent renovation, or purchased at any specialized store for repairs.

Pipes are connected to each other using a plastic corner.

The sections are connected to each other with special double fasteners.

A special welding machine can be a good help. plastic pipes from propylene, which is used during installation by professional plumbers.

If there is nowhere to borrow it, you can use the conventional heating method over the stove.

If desired, pvc pipes can be painted with paint. For durability, use a mixture of putty and regular gouache.

Children themselves suggest various ways of using multifunctional screens in kindergarten.

For sewing covers, you can use any available fabric. It must be remembered that it must be durable and easy to wash, since children's games are fraught with various consequences for any furniture, andwill not be an exception.

It is best to choose the material bright and colorful.

Depending on the design, Velcro fasteners, ribbons or laces for garters may be needed, additional material for pockets or loops, as well as secure glue.

Due to the observance of the principle of accessibility, children have the opportunity to independently change the space in their group at any time.

Manufacturing process

Step-by-step manufacturing instructions screens from to kindergarten simple enough.

After the dimensions of the future screens, you need to cut pvc pipes to the desired length. This can be done either by yourself (plastic material does not require much effort).

You can ask for slicing while shopping in the store.
Next, we fasten the frames of the sections using corner joints.

All material is strong and durable enough to use.

Here you will need either a special apparatus or little physical effort to heat and insert the profile plastic pipe into the corner.

The manufacturing process is simple and will take you a little time.

Now it's time to do the next step: sewing covers.

The cover can carry a semantic load.
The area of the selected fabric should match the size of the frame section. It is recommended to sew the edges of the section. Fasteners made of Velcro tape or loops are sewn on, or glued on the upper side of the future cover.

Covers can be of different colors, from monochromatic pastels to brightly delicate children's drawings.
If the assembled screen painting is required - we carry it out in a well-ventilated area, let the structure dry.

It is better to paint the intersection mountings separately so that they do not lose their functionality.

The final stage is decoration. On the stretched covers, you can stick colorful applications or sew on small pockets.

These additions will develop children's motor skills and further increase the functionality of the new screen, allowing it to be used in various games and performances.

VIDEO: What you can do with your own hands from plastic pipes.

It is difficult to list all the products that you can do with your own hands, having only fragments of building materials at hand, as well as fasteners for connecting them. Using such raw materials, you can create incredible and necessary things.

There are really countless ideas for making crafts from simple hollow objects. These can be both ordinary organizers for organizing the workspace and stands for a laptop or tablet, as well as designer masterpieces (chairs, beds, coffee tables and other furniture) that emphasize a person's individuality.

DIY objects and products made of polypropylene pipes are the most suitable activity for people with a rich imagination. At the same time, they do not need to purchase specialized equipment and tools for the production of homemade plastic crafts, because such materials can be joined quite simply.

Such constructions can be:

Collapsible, the installation process of which is simplified through the use of fittings, connectors, angles and tees.
One-piece, for the assembly of which you will need special assembly adhesive for plastic or bolts.

And, if the second method is more suitable for stationary interior products, then masters who are interested in the production of seasonal items turn to the first method of installation. For example: a folding fishing chair, a greenhouse, a shed and a gazebo, a garden swing, etc. Such structures can be easily assembled on the eve of the season, and then put away for storage, without worrying that they will deteriorate in winter.

Crafts from hollow PVC pipes have a huge number of advantages. Among the main ones are the durability of raw materials and the aesthetic appearance of finished products. The relative cheapness of materials is also important, which is a great temptation for many who want to try their hand at creating universal plastic items.

Other benefits include:

Practicality of installation and operation.
Structural strength due to the high density of raw materials.
A variety of options for crafts (configurations, sizes, appearance).
The ability to create exclusive copyright items that can later be put up for sale or presented as a gift.
Absolute safety and non-toxicity of raw materials, allowing the use of crafts in a variety of rooms and conditions.

Whatever you decide to create a structure, you should remember that the main raw materials (pipe trimming) can be obtained quite easily, but you will have to prepare fasteners and tools in advance. The same bolts, plugs and fittings - you will need to first calculate how many parts you need.

In addition, it is also necessary to prepare auxiliary tools that can be useful in the process of creating an exclusive:

pencil and ruler / tape measure;
drill and screwdriver;
glue or screws.

If you decide to bend materials to obtain a product of a certain shape, first think over how you will be able to achieve the desired result. In general, crafts from fragments of plastic pipes are made easily and simply, as you can see by reading this article to the end.

DIY fabric screen with a wooden frame

The classic version is a fabric screen stretched over a wooden frame. The product is made in the form of a dressing table, book or accordion. The number of frames affects the final shape. Prepare the following tools and materials:

drill, screwdriver;
construction stepper;
hacksaw, sandpaper;
door hinges (12), screws (96);
the cloth;
wooden blocks (24);
varnish, paint, universal glue;
decorative elements (beads, ribbons, etc.).

Measure from the edge of each plank 6 cm, draw a line. Then cut along the markings up to half the width of the planks.
Make cuts from each edge of the plank, removing the layer of wood to the notch - attach a chisel to the bar and hit it with a hammer. Apply universal glue to the inner surface and assemble the planks into the frame, then press them firmly.
After the glue dries, sand the surfaces with sandpaper, varnish on wood. Fasten the door hinges to the frame with a screwdriver.
The finished base for the screen should be decorated with a fabric of any texture and color. Make a pattern to fit the frame, taking into account the hem. Use a construction stapler to attach the fabric to the base. The tension should be good. Begin to fasten in the following order: top, bottom and sides.
Next, start assembling the screen on the door hinges. The latter will need 2 for 1 connection, so that folding the product in the future is convenient.

The best ideas for country houses

Very often, PVC pipes are used as the most optimal raw material for the manufacture of furniture and household items for children. For example, small chairs, low tables, screens for playing areas, football goals for outdoor games, etc. are very popular. There are many more useful and interesting things for the manufacture of which inexpensive PVC pipes are suitable.

For example, in order to organize leisure time for children in kindergarten, you can make a mobile puppet theater yourself. Moreover, you only need a few pieces of pipe and connecting elements to create a frame-frame, as well as material for the curtain. The result can be a very attractive, and most importantly, an invention necessary for a kindergarten.

The frame can be made in the form of a screen of two bearing supports, two lintels and a floor frame of four tubes, as shown in the photo below on the left. You can also do a more complex structure with your own hands - a screen of three sections, for the manufacture of which it will take a little more consumables and time.

No less relevant devices made of polyvinyl chloride pipes for organizing children's leisure time in kindergarten:

developing stand (business board);
washing for hands or toys;
crib for dolls, etc.

Another PVC pipe construction necessary for kindergartens is a bicycle parking. It is easy to make such a stand with your own hands, even if you have never had to deal with the installation of pipelines before. In order to build such an installation, you will need two long and two short fragments for the base, as well as several more pairs of identical lengths for the stands holding the wheels.

The lucky owners of private houses outside the city can also use PVC pipes with benefit. For those who come to rest and relax in nature, chic gazebos and awnings can be made from such materials. And for lovers of cinema, you can realize a homemade cinema from a canvas stretched over a frame made of PVC pipes.

The same garden furniture can be made with your own hands from pipe sections. Tables, folding chairs, comfortable garden chairs and even sun loungers - these products can be easily made by yourself, having looked at the drawings on the Internet or by developing your own project.

Benches and swings are incredibly beautiful, reliable and comfortable PVC tubes. And the most important thing is that the production of such structures does not require significant investments. Yes, they will serve for a very long time, delighting not only the owners, but also their guests.

For those who come to the dacha not only to relax, but also to work, there are also several ideas for arranging their personal plot. What can be done from the scraps of plastic pipes that remained, for example, after replacing the pipeline? Yes, a lot of things! This can be not only the necessary improvised installations and devices, but also decorative structures to decorate the territory adjacent to the house.

For example, if a hose is bothering you, and there is no suitable place to store it, make a stand from pipe scraps with your own hands. Those wishing to quickly design a fence for a flower bed or to protect themselves from neighbors can use the same material. As you can see from the photo, plastic will perfectly fit into any environment and will help keep your vegetation free from animal encroachments.

For lovers of domestic animals, plastic hollow structures can be used to create pens and cages of various configurations and sizes. Cheap mobile structures are obtained, which at the same time look very aesthetically pleasing. It is worth noting that materials with a large hole can immediately come in handy.

Another do-it-yourself product made of polypropylene pipes that is relevant for the summer season is a shower arch and a frame for irrigation. These are such banal designs that you don't even need a diagram to create them. All you need is a few scraps from PVC collectors, fittings for connecting them and, of course, a drill for making holes for water.

You can also use this building material when erecting a temporary carport. Such a design will be very light, it can be very easy to assemble and disassemble if necessary. Moreover, given the durability of the raw materials, a plastic canopy with a pipe frame can be made on a permanent basis if other building materials are available.

Old furniture can make wonderful flowerpots. It will emphasize the natural charm of the suburban area, give it a sense of style and a noble look.

If you open the dresser drawers and put pots of your favorite plants inside, you can get economical vertical landscaping next to your house or gazebo.

Interesting! They create flower arrangements using as pots: watering cans, teapots, pots, bowls that have served their time. For decoration, their outer planes are painted, painted, pasted over with stones or shells.

Do-it-yourself screen for the room made of cardboard

Traditionally, screens were made of wood: a solid board or slats on which the fabric was stretched. Nowadays, a creative approach and the use of a variety of materials are more in demand. Let's consider them in more detail.

Tree. As before, it can be a board - smooth or with a pattern carved on it, or a structure made of beams or slats. Plywood is in demand for creating screens due to its low cost, lightness and ease of processing. Designers also offer great ideas for using objects that have come out of use. For example, you can build a screen from old doors, having previously restored the panel, giving it a fresh look. A screen made of wooden elements can be installed both in the house and in the garden.
Wooden screens are made from frames and panels fixed to them.
Metal. Most often, metal frames of a given shape are used, which can be ordered from a familiar welder or at a specialized enterprise. Panels made of wood, glass, plastic are inserted into these frames, or fabric is stretched. A sheet of iron will look bulky and will not add comfort to the room, but an ornament forged from rods will revive the product very much. Often, small-diameter metal pipes (up to 5 cm) are used to create such a frame. This screen looks great in a garden or yard.

You can stretch a beautiful fabric or paper with an original pattern on a metal frame of any shape
Plastic pipes are also used in the creation of frames and frames for screens. They are much cheaper, and most importantly, lighter than metal ones. A screen made of plastic pipes is easy to assemble and disassemble if necessary, and it is very simple to maintain: it is enough to brush off dust from the surface in time. If necessary, you can hide under it outside on a hot sunny day.

Plastic pipes can be used to build a funny screen for children's parties
Plastic panels are a very easy-to-use material, often already ready to create a screen out of it. It is enough to pick up several panels with the same pattern, connect them - and now you no longer need to think about fastening the fabric drapery. You can also insert the panel into a frame made of wooden slats or metal. Such screens are not afraid of the sun and rain; they can be used to decorate a garden plot.

A screen made of plastic panels is well suited for a bathroom, and for a pool or garden shower.
Cardboard is a cheap material that can quickly turn into an original, creative screen. Working with cardboard is very simple: just cut out the parts according to the scheme and fasten them into a single canvas. Often such screens are placed not only straight or at an angle, but also in a wave-like manner. True, they are completely unsuitable for the street: they deteriorate from moisture, wind and sun.

Cardboard screens are easy to design, but can only be used in the home
Branches: bamboo, willow twig, reed. Screens from these materials are very popular due to their lightness, portability and visual simplicity. Fashion for them never goes away, they are combined with many styles in the interior: classic, tropical, eco-style, empire style. True, the manufacture of such a screen requires the skills of weaving from a vine. But the finished product will look appropriate in the garden and will not deteriorate from weather conditions if the material is processed correctly.

A simple cane or bamboo screen is not afraid of the weather
CDs, vinyl records. They can be connected to each other with threads or staples, you get a stylish openwork fabric. It is hung anywhere in the room in a straight line, in the form of a wave or semicircle. Most often, screens made of plates are used in the house, but even on the street such an element of decor looks original.

Vinyl records or laser discs - cheap and affordable material

Decorative cords stretched vertically over the frame - simple in execution and very effective screen-partition Vinyl records linked to each other in a canvas are an excellent decoration for a music lover's room Reed or bamboo is a great material for a flexible screen The screen can be made from ready-made door leaves that are sold in hardware stores. You can make a simple screen of smooth boards yourself Do not rush to throw away old doors - they will make an excellent decor element for your home. Wooden slats and fabric stretched over them with an interesting pattern - a bright accent in any room Cardboard butterflies collected in a voluminous canvas will decorate your room From cardboard rectangles, you can build an original high-tech screen

Such a seemingly simple device is a screen, and how much space for imagination is given by its production! Sometimes structures that are complex in appearance turn out to be simple in execution, and sometimes vice versa - a simple structure requires a lot of attention and effort. But in the end it turns out that everything is on the shoulder if you want to decorate your home with something special.

One of the interesting options is a cardboard screen. To do it yourself, order cardboard tubes designed for winding fabrics or linoleum. In a specialty store, they are generally considered waste. The finished partition will turn out to be wavy. A set of tools and materials:

cardboard tubes (16–20);
durable decorative rope (1 roll);
drill;
scissors, tape measure, pencil;
paint that matches the interior color (optional).

If you decide to use pipes for linoleum, then 8-10 pieces will be enough. They are over 3m long, so cut each in half:

Cut all pipes to the required height and arrange them in a row.
Measure from the bottom edge 20 cm and mark each element (point A).
Measure up a line 1 m long and make a new mark (point B).
Next, mark point C in the center of each pipe. Drill holes in the indicated places.
Pass the decorative rope: first at points A, then at B and C. After that, slide the pipes and tie the ropes on the sides of the screen with strong knots. The end result is a screen that looks like a reed or bamboo partition.

DIY decorative screen made of plastic pipes

Making a mobile screen with your own hands is possible using plastic pipes. A ready-made partition will help you zone the premises or hide from the sun on a hot day. Prepare:

screwdriver;
self-tapping screws, washer nuts;
paints, brush;
furniture wheels (4);
a board that will be the base;
a pair of flanges;
plastic pipes (3);
metal pipe for weighting the base.

If necessary, plastic pipes can be replaced with metal products of the same width and length. Sequencing:

Mark up the chalkboard. Mark the places where the wheels will be attached.
Secure the wheels to the board with self-tapping screws.
Fix the weight (metal pipe) on the underside of the base. Screw it on with a self-tapping screw and using the holders.
On the upper side of the base, you will need to fix the flanges into which you need to insert the pipes.
On top of one horizontal pipe, connect two vertical pipes by inserting their ends into the connecting elbows.
After finishing the work, paint the entire structure.
Get creative, for example, hang thick fabric on the frame. An old curtain is quite suitable, the main thing is that its size corresponds to the width of the frame, and the pattern with a flower matches the main notes of the interior.

Methods for connecting pipes in structures

The instruction for making a screen includes the following steps:

Drawing up a drawing;
Choice of materials;
Wireframe creation;
Decorating.

At this stage, it is enough to decide on a couple of criteria:

Number of leaves... The best option is three. This design is quite multifunctional and can be used:

... Separate a corner or bed from the rest of the room to create a separate cozy corner in it;

For puppet theater. It is enough just to leave a hole on the central flap for the appearance of dolls;

For garden . Three sections are quite enough to make a place protected from prying eyes and sunlight in your suburban area;

Sizes. For a room, it should be selected in accordance with its dimensions, large structures will be used more efficiently on the site, but, for example, in a kindergarten, on the contrary, a low partition will be enough.

The screen can be made literally from scrap materials. Here are examples of some interesting solutions:

Plastic pipes... If you have a pipe soldering iron, then there is nothing easier and faster than soldering a frame made of polypropylene pipes. They will turn out to be a practical and moisture-resistant design, perfect for use on the street, near a river, in a bathroom or next to a pool;

Cardboard. The price of this option is the lowest, it is well suited for a children's room;

Polycarbonate. Another not very expensive and practical option that can look stylish both indoors and withstand all weather conditions outside;

Tree . Despite the abundance of various materials, wooden frames covered with cloth and paper are an immortal classic for the manufacture of screens, which we will also turn to.

Photo	Description
	We prepare: 12 pine planks 170 x 2 x 6 cm; 12 pine planks 60 x 2 x 6 cm; Pencil; Carpentry glue; Brush; Wood varnish; Chisel; Hammer; Clamps; Cordless or mains screwdriver; Sandpaper; 12 metal corners; Wood screws
	We apply the markup on all planks, departing from the edges of 60 mm.
	We make cuts according to the markup.
	We do it with our own hands with a hammer and a chisel.
	Apply glue with a brush to the inner parts of the cuttings; We connect the strips into frames, fixing with clamps; We grind the frames with sandpaper after the glue has hardened; We process with varnish.
	We fasten the corners with screws to strengthen the structure.

Photo	Description
	We draw patterns on cardboard or glue ready-made ornaments on it; We cut them out, creating stencils.
	We apply the pattern to the fabric using a stencil, paint and roller. If a wedding screen is being made, then the appropriate colors and patterns can be used.
	We saturate the gauze with the appropriate paint; We attach it over the patterned fabric.
	We stretch the finished canvases onto the frames, fixing with screws; We connect the frames with hinges.

If you are interested in the question of how to make an interesting craft with your own hands, then to give the plastic products the desired shape, you should stock up on some set of tools. You will need a gas torch, metal saw or jigsaw. Homemade products can be solid, connected with adhesive and bolts, or collapsible.

If you nevertheless decide to use this method, then the pipes must be cleaned of contamination in the places of the future connection. The edge of the pipe to be inserted should be coated with grease. When the pipe is completely in the socket, it must be pushed back a little. This will allow you to further disassemble the structure.

The use of glue helps to make the structure more durable. The parts are first processed with sandpaper at the connection points, followed by thorough degreasing. The glue must be applied to both sides of the fastening - both the inner and the outer. When joining, the pipe is inserted tightly to failure, and then a quarter turn is made. After this, secure adhesion should be ensured by tight fit of the parts.

The option with bolting will be very laborious, as can be seen in the photo of crafts from plastic pipes. The master will need to mark the places where the holes are drilled and use a drill in the work. It is no longer necessary to glue, and the connections will be very strong.

Plastic pipes can be used to make not only convenient household items, but also pieces of furniture. In order for such a homemade product to last a long time and be reliable in operation, you need to take care of the correct connection of individual segments. Since it has already been said about the connection of polypropylene pipes, we will consider joining only PVC pipes.

PVC plastic pipes can be connected in the following ways:

in a bell with a rubber seal;
using an adhesive composition;
bolted, drilling holes.

The first connection method is characterized by simplicity, but insufficient rigidity. Before connecting, it is recommended to clean the inner and outer surfaces of the pipes at the joint from dust particles and to treat the inserted part of the pipe with silicone grease. First, the pipe is inserted into the socket until it stops, after which it is carefully pushed back by 0.7 - 1 cm. The structures assembled in this way can be further dismantled, which is convenient for seasonal products.

The second method of pipe assembly is characterized by reliable fixation and greater labor intensity. Joining work begins with sanding the mating surfaces of the socket and pipe for better adhesion. Then they must be degreased with methylene chloride. The adhesive is applied along the entire length of the prepared outer surface of the pipe and 2/3 of the length of the inner surface of the socket.

Finally, the pipe is inserted into the socket until it stops and turned a quarter of a turn. For gluing, you need to press the parts for 1 minute. For good fixation, all operations to connect two segments must be carried out quickly enough. The connected elements are left for several hours until the adhesive is completely dry.

You can make unusual figures of ladybirds, roosters, chickens or chickens from ordinary balloons and concrete mortar. Here's what you need to do this:

Air balloons;
Water, seeded sand and cement;
Paints and brushes.

Plastic pipes faithfully serve as elements of heating systems, sewerage systems, plumbing, and so on. However, this does not exhaust their field of application. Lightweight, easy to process, hygienic and versatile material is widely used as a source for a variety of crafts.

A screen for a puppet theater made of plastic pipes is one of such unusual solutions.

Why do you need a screen

This is a folding structure of different heights, designed to temporarily fence something, not to prevent access, but only to hide what is happening from the eyes. Partitions are extremely convenient in large rooms where you need to zone a small corner of the space for a while. This option is most often used in the nursery, or rather, in the family bedroom, to fence off the crib while the baby is sleeping.

The screen is also in demand in a nursery with children of different sexes: changing clothes behind the protection of colored fabric is much more convenient than trying to do the same behind the cabinet door.

Well, in the end, the partition serves as an excellent way of zoning a common room - to allocate a working area, for example, during the preparation of a project.

However, a do-it-yourself screen made of plastic pipes often turns out to be necessary in a variety of creative activities - in a kindergarten, in a preschool educational institution.

Theater for children and adults

Perhaps adolescents and children a little younger are more attracted to computer games, but experience shows that those whom Melpomene managed to touch cannot be left behind. And there is nothing to say about kindergarten: the simplest puppet theater attracts kids much more than drawn fictional characters.

The partition in this case becomes an urgently needed item. And if in the preschool educational institution, perhaps, there is money to buy a screen, then in kindergarten, and in the lower grades of school, devices for a puppet theater have to be made with their own hands.

The design of this multifunctional device is very simple, so there is no need to complete a master class for it. The photo shows a sample of the product.

Materials and tools

The following are used in the manufacture:

polypropylene pipes with a diameter of about 25 mm;

plastic fittings;
dense fabric, leatherette is used as a filler;
scissors for cutting plastic pipes, you can do with an ordinary hacksaw.

Master class on a screen made of plastic pipes

How to make a multifunctional theater screen?

The use of decorative partitions to delimit space and decorate the interior has been known since ancient times. Lightweight, compact and mobile screens were used many centuries ago in China, Greece, Egypt, and the Roman Empire. They were made from simple and lightweight materials and could be of different sizes and shapes. Wealthy owners decorated the partitions with rare fabrics, inlays, precious metals and stones. We invite you to learn how to independently create beautiful, original screens with your own hands.

What are the screens

When choosing a screen model, not only stylistic orientation is important. It is necessary to take into account the space in which the product will be located, its mobility and even its functional purpose. Therefore, we turn to theory and consider what types of screens are.

Swing sliding. Consist of several interconnected frames, from 3 to 8 or more. If necessary, they can be folded into an accordion and removed.
Single-screen screens consist of one wide sash. It can be a frame made of any material with a stretched fabric or paper, a sheet of plywood, chipboard, plastic or glass fixed on a stand. It is advisable to equip such a screen with wheels so that you can roll it to the right place.
The screen-book consists of two wings of the same width (although asymmetry is allowed). Fold it like a book and rearrange it where there is less space. Depending on the decoration, such a screen can be used for dressing up and even for holiday photo shoots.
Flexible screens. They are made from many long thin sections: pipes, plates, laths, connected to each other. The peculiarity of this screen is that you can put it in a wave, in a spiral, or even twist it into a roll and set it aside - it does not take up much space.
Blind screens can consist of a different number of shutters, their distinctive feature is complete opacity. It can be a solid board (plywood, chipboard, plastic, sheet of metal, frosted glass), thick fabric stretched over the frame or cardboard inserted into the frame. Such screens are used not only for zoning rooms, but also as partitions for changing clothes.
Transparent screens. Most often it is a transparent fabric stretched over a frame - organza, tulle and even starched gauze; it is very convenient to use a mosquito net. Also popular are metal models made using the technique of air forging, or wooden screens with openwork through carving. Such products are decorative in nature, they are often used for wedding and holiday photo sessions or to decorate rooms and gardens.

What materials are better to make a decorative partition for a room

Tree. As before, it can be a board - smooth or with a pattern carved on it, or a structure made of beams or slats. Plywood is in demand for creating screens due to its low cost, lightness and ease of processing. Designers also offer great ideas for using objects that have come out of use. For example, you can build a screen from old doors, having previously restored the panel, giving it a fresh look. A screen made of wooden elements can be installed both in the house and in the garden.
Metal. Most often, metal frames of a given shape are used, which can be ordered from a familiar welder or at a specialized enterprise. Panels made of wood, glass, plastic are inserted into these frames, or fabric is stretched. A sheet of iron will look bulky and will not add comfort to the room, but an ornament forged from rods will revive the product very much. Often, small-diameter metal pipes (up to 5 cm) are used to create such a frame. This screen looks great in a garden or yard.
Plastic pipes are also used in the creation of frames and frames for screens. They are much cheaper, and most importantly, lighter than metal ones. A screen made of plastic pipes is easy to assemble and disassemble if necessary, and it is very simple to maintain: it is enough to brush off dust from the surface in time. If necessary, you can hide under it outside on a hot sunny day.
Plastic panels are a very easy-to-use material, often already ready to create a screen out of it. It is enough to pick up several panels with the same pattern, connect them - and now you no longer need to think about fastening the fabric drapery. You can also insert the panel into a frame made of wooden slats or metal. Such screens are not afraid of the sun and rain; they can be used to decorate a garden plot.
Cardboard is a cheap material that can quickly turn into an original, creative screen. Working with cardboard is very simple: just cut out the parts according to the scheme and fasten them into a single canvas. Often such screens are placed not only straight or at an angle, but also in a wave-like manner. True, they are completely unsuitable for the street: they deteriorate from moisture, wind and sun.
Branches: bamboo, willow twig, reed. Screens from these materials are very popular due to their lightness, portability and visual simplicity. Fashion for them never goes away, they are combined with many styles in the interior: classic, tropical, eco-style, empire style. True, the manufacture of such a screen requires the skills of weaving from a vine. But the finished product will look appropriate in the garden and will not deteriorate from weather conditions if the material is processed correctly.
CDs, vinyl records. They can be connected to each other with threads or staples, you get a stylish openwork fabric. It is hung anywhere in the room in a straight line, in the form of a wave or semicircle. Most often, screens made of plates are used in the house, but even on the street such an element of decor looks original.

Unusual handmade screens - gallery

Decorative cords stretched vertically over the frame - simple in execution and very effective screen-partition Vinyl records linked to each other in a canvas are an excellent decoration for a music lover's room Reed or bamboo is a great material for a flexible screen
The screen can be made from ready-made door leaves that are sold in hardware stores. You can make a simple screen of smooth boards yourself Do not rush to throw away old doors - they will make an excellent decor element for your home. Wooden slats and fabric stretched over them with an interesting pattern - a bright accent in any room Cardboard butterflies collected in a voluminous canvas will decorate your room From cardboard rectangles, you can build an original high-tech screen

Necessary materials and assembly diagrams

There are many ideas for making screens. We tried to find for you those that are not very difficult for beginners. The materials and tools used in the master classes are readily available.

Classically shaped screen made of wooden beams and fabric

The traditional version of the screen provides for a fabric stretched over a wooden frame. The product can be made in the form of a book, dressing table or accordion, the shape depends on the number of frames. And the pattern on the fabric and its colors determine which room your screen is suitable for.

Required tools:

drill;
screwdriver;
construction stapler;
12 door hinges;
hacksaw;
sandpaper;
96 screws.

In addition, you will need materials:

wooden blocks;
varnish and paint;
the cloth;
universal glue;
decorative elements (ribbons, beads, appliques, and so on).

For a full-fledged screen, you need to take 24 bars 6 cm wide and 2 cm thick, of which 12 pieces. length 170 cm and 12 pcs. length 60 cm.

The basis of the screen is a frame, it is not difficult to make it. First of all, you need markup. Take a bar, measure 6 cm from its edge using a ruler and draw a line with a pencil. Repeat for each plank.
Now, with a hacksaw, make cuts along the markings. Their depth should be up to half the width of the plank.
Make cuts from the edges of the plank: attach a chisel to the bar and, hitting it with a hammer, remove the layers of wood to the cut.
Apply universal glue to the inner surface of the cut. Assemble the planks into the frame and press firmly.
Wait until the glue is completely dry, then sand the surfaces with sandpaper, especially at the joints. Cover the frames with wood varnish.
For fastening, door hinges are needed (you can replace them with metal corners). Fasten them to the frames with screws using a screwdriver.
The base for the screen is ready, now you need to decorate it with fabric. It can be of any color and texture; when choosing, be guided by the main colors of the interior and your preferences. First of all, make a pattern to fit the frames, in which take into account the folds. That is, on each side of the frame you need to add 5 cm. You can use fabric of different colors or even the remaining large pieces of different fabric by stitching them on a sewing machine.
Use a construction stapler to attach the fabric to the frames. First of all, fix the upper part, then, pulling the fabric well, fasten it to the lower bar of the frame. The tension should be very good so that the fabric does not begin to sag later. Fasten the sides last.
When you have finished tightening all the frames, proceed to assembling the screen on the door hinges. You will need 2 loops for 1 connection, so that later it will be convenient to fold the product.

We make a screen from wooden slats and fabric - video

Portable screen made of cardboard tubes: creative, unusual, environmentally friendly

Eco-interior design has not gone out of fashion for several years. Its feature is the use of natural materials and ease of manufacture. From the usual improvised things that are often sent to the trash as unnecessary (packaging, wrapping materials), you can create real masterpieces with maximum imagination and minimum effort.

We offer you to make a light screen from the simplest material - cardboard tubes for winding linoleum or fabrics. In specialty stores, they are discarded like waste, so you can buy them for literally a penny. And if you're lucky, then get it for free.

This screen is very stable due to its wavy shape and its own weight. For manufacturing you will need:

16–20 cardboard tubes for winding fabric;
a skein of durable decorative rope;
roulette;
scissors;
pencil;
drill
if desired, paint in a color that matches the interior.

If you are using pipes for linoleum, take 8-10 of them. Since they are more than 3 meters wide, you need to cut each in half.

Cut the pipes to the height you need. You can alternate between different heights and widths, so the screen will look more fun. Lay all pipes in a row, aligning along one edge: it will become the bottom of the structure.
Measure 20 cm from the bottom edge and make a mark on each pipe at this level (point A). Measure a line 1 m upwards, mark again (point B). Mark point C strictly in the center of the segment. Repeat this step for all the pipes.
Using a low speed drill, drill through the holes at the marked points.
First, at points A, then B and C, thread a decorative rope through the holes.
Slide the pipes tightly and tie the ropes on the sides of the screen with strong knots.

That's all, the screen is ready. Outwardly, it resembles bamboo or reed.

If desired, such a screen can be moved to any point in the apartment in order to block a bed, a workplace, or simply to delimit the space.

Modular cardboard partition

Even such a simple and unpresentable-looking material like cardboard boxes will serve us well. And if there is an opportunity to get sheets of cardboard - generally great! In order to make a cardboard screen yourself, prepare the following materials:

sheets of cardboard 4 mm and 7 mm wide;
ruler;
pencil;
scissors or a utility knife.

Use the diagrams below to create modules.

You can redraw these diagrams by eye or print them on a printer, keeping the proportions. The size of each side is indicated in centimeters. You will get 5 parts, in the diagrams they are indicated by the letters A, B, C, D, E.
Cut out the diagrams. Attach each detail to a sheet of cardboard and carefully trace with a pencil, taking into account all the slots. For sample, join two pieces of cardboard to determine the width of the slot.
Cut out parts A-D from thinner cardboard, and parts E from thicker cardboard: they will serve as the legs of the screen. You end up with 16 A parts, 80 B parts, 70 C parts, 64 D parts, and 5 E parts.
When you have cut out all the parts, start assembling the individual modules. Parts C and D will become connectors for larger A and B.
Use connectors C to fasten the curtain modules together.
Fix parts E, which serve as legs for support, on the bottom of the screen.
The size of such a screen can be adjusted by making it higher or lower, forming a cascade or ladder.

Simple cardboard partition: an option for novice craftsmen

If the process of creating a screen from complex multi-part modules seems difficult to you, use the simpler option. You will need:

sheets of cardboard;
pencil;
scissors.

You can take cardboard of the same color, or "play" with the gradation of shades.

On thick cardboard, redraw the outline of the part from the picture. You can choose the required dimensions yourself, depending on your own preferences or the parameters of the room where the screen will be located. You will need a lot of such parts, but there should be a pair of them. Cut carefully with scissors taking into account all grooves.
Prepare the modules by connecting 2 pieces perpendicular to each other in the central grooves.
Line up the finished modules, securing them to the side grooves; build the second row in the same way, and so on. You will get a light and original screen of the required size and shape.

Using the same scheme, you can create a screen out of cardboard butterflies. Cut out the insect parts for the modules. Use different colors, so the screen will turn out brighter and complement any interior.

In the same way, connect 2 parts to each other, and then add the modules to the screen size you need.

Do-it-yourself cardboard dressing screens - video

Mobile screen made of metal or plastic pipes

A screen-partition made of metal pipes helps to zone a room or hide from the sun on a hot summer day. And the peculiarity of this design is that it moves easily on wheels.

To make such a screen, you will need:

3 metal pipes for the frame;
1 metal pipe for weighting the base;
4 furniture wheels;
2 corners for connecting pipes in the upper part;
a board that will serve as the base of the screen;
2 flanges for fixing the pipes to the board;
self-tapping screws and washer nuts;
screwdriver;
brush and paints.

Metal pipes can be replaced with PVC pipes of the same length and thickness. But to make the base heavier, you still have to take an iron pipe or other heavy load.

Draw a markup on the board, indicating the attachment points for the furniture wheels.
Fasten the wheels with self-tapping screws to the board using a screwdriver.
Now you need to fix the weight on the underside of the screen base. Fasten the load with self-tapping screws using the holders. This is necessary so that the screen does not fall during operation. Unfortunately, the higher such a structure, the less its stability, so one cannot do without weighting.
Fasten the flanges from the upper side of the baseboard, insert the pipes into them.
Connect two vertical pipes on top of one horizontal one, inserting their ends into the connecting bends. When finished, paint the structure.
Now is the time to get creative. If you plan to use the screen solely as a partition, hang a thick fabric on the frame. Even an old curtain can serve as it; the main thing is that the size of the fabric corresponds to the width of the frame, and the color and pattern correspond to the main notes of the interior.

And also such a screen on wheels can be temporarily used as a mobile wardrobe. Place it in your bedroom and hang your clothes on a hanger.

Opaque wooden sliding structure

If you need a dense screen that can even muffle sounds, then you need something more serious than a piece of fabric fixed to the frame. Use wood.

The wooden structure will serve you not only as a partition. Thanks to the dense lining, you can attach family photos, children's drawings and crafts to the screen.

The case for the screen can be thin wide boards made of any available wood. The easiest way is to use MDF panels.

You will need:

3 thin boards 45 cm wide and 180 cm long;
3 cuts of padding polyester 50 X 200 cm;
3 cuts of dense fabric 50 X 200 cm;
primer or sealant;
construction gun;
acrylic paint;
screwdriver;
scissors;
upholstery tape;
hinges for doors;
decorative construction nails.

If you have an opportunity to find boards of greater width, use them. Just do not forget that the synthetic winterizer and fabric must be adjusted to size.

First, prepare boards or MDF panels. Cover one surface with a primer - this will be the back. When the primer is dry, open this side of the panel with acrylic paint.
Cut a strip from the padding polyester with a width slightly larger than the panel, taking into account the allowance. Place the material on the board and secure with a construction gun. Cut off the excess synthetic winterizer on the sides with scissors.
It was the turn of the fabric. The cut should be the same size as the padding polyester. Attach the fabric to the panel, pull it tight, fold the edges and secure with a construction gun over the padding polyester layer.
Use glue to secure the upholstery tape around the edges of the panel. Additionally fix with decorative nails, driving them at a distance of 5 cm from each other. Repeat these steps for all panels.
Now is the time to connect the structure. Lay the two panels face down; make sure that the bottom edges are level. At a distance of 10 cm from the bottom and top edges, attach the furniture hinges, attach them with a screwdriver. Fix the third panel in the same way.

If you wish, you can additionally decorate the finished screen with a pattern of decorative nails, giving the surface volume and texture.

Screens for creating spectacular photos

If you are a professional photographer, then you probably know how important it is to have beautiful, spectacular screens for thematic photo shoots. Most often, such orders are made for a wedding, but other celebrations are also in demand. Therefore, a beginner in the photo business needs to consider any possibilities just in case. We will help you create beautiful, light and airy screens for different photo sessions.

Painted screen for wedding photo shoots

A master class on making a wedding screen is based on the same principles by which such products are made from a wooden frame and fabric. True, it will be a little more difficult: you have to implement your skills in painting.

To make a screen for photo shoots, you will need:

mosquito net;
wooden blocks;
corner brackets;
long self-tapping screws 5.7 cm;
short self-tapping screws 1.27 cm;
loops;
scissors;
acrylic paint (white);
sequins;
stapler;
drill for tightening self-tapping screws;
water-based protective coating;
brush;
white paint for wooden surfaces.

First you need to decide what size the screen will be. It depends on the size of the room in which the photo sessions are held, the number of participants, and additional decor items. Having determined the height and width of the future product, you can easily calculate the amount of materials needed. For example, you can use the dimensions presented in the previous versions of the manufacture of screens.

Manufacturing and assembly instructions.

Cut the bars to the specified dimensions, collect them in a frame. Connect the elements with self-tapping screws and angle brackets. To do this, it is easier to use a screwdriver or drill with a screwdriver attachment.
If you decide to paint the frame white, do so immediately after assembly. You can do without this, leaving the wood with its natural color, but then it is advisable to open the surface with varnish.
Now you need to secure the mosquito net. Cut it into pieces according to the size of the frame, leaving small allowances. Lay out the mesh on the back surface of the future screen and attach it with a construction stapler.
Cut off the excess mesh with scissors.
Using a brush, spread the water-based coating onto the mesh. This will help the paint adhere better as you paint. Wait for the mesh to dry.
The time has come for creative work: drawing a pattern. You can choose any floral and fantasy motifs. Apply acrylic paint with light strokes using the same brush as for the protective coating. To create shadows, you can add a little gray or black paint.
To give the screen for photo shoots a festive brightness, coat some places on the surface with PVA glue and sprinkle with sparkles. Let the product dry well.
It remains only to connect all three frames with door hinges - and the screen for the solemn photo sessions is ready!

Screen for creating a photo with fabric drapery

A simple master class from the famous Moscow decorator Elena Teplitskaya will help you make a cute, funny and original screen, which will certainly come in handy for photo shoots.

Materials and tools you will need:

frame made of metal rods;
cuts of well-draped fabric, such as organza;
threads and needles;
decorative cord;
markers for textiles.

As a decoration for the screen, you can take balls of thread, decorative braid, ribbon or bows - whatever your imagination tells you. In addition, the fabric can be either one color or different colors on each screen frame.

Cut the fabric to fit the screen. The width should be the same, and the length of the cut should be 20 cm more than the height, in order to make a fold later. Organza or other light translucent fabric can be pre-treated with a solution with the addition of starch - this will make it tough and pliable. Form folds by squeezing the cuts vertically to make the fabric look like crepe paper.
Spread the fabric over the frame from the top, securing it with pins. Do not pull it horizontally; it should lie in folds. Now use neat stitches to sew the pinned spots.
Use a fabric marker to paint some simple ornament onto the drapery. This stage is a great way to realize your artistic talent.
The applied drawing must be dried with a hairdryer. If you are working with a special hair dryer for embossing, observe safety precautions and do not bring the instrument too close to the fabric: it can catch fire. Use a regular hair dryer to dry your hair at a maximum of the second speed.
Paint the visible metal parts of the frame with a marker to match the color of the fabric and the pattern on it. Decorate the top of the screen: string balls of thread, bows or other elements of your choice on a decorative cord, and fasten to the fabric with a stapler or sew.

Do-it-yourself partition for a room - video

Share with your friends!