The job description of the chief power engineer determines the procedure for appointing an employee to a position and dismissing it, his skills, education, knowledge, experience, and skills necessary to perform work tasks. The document specifies the functional duties, responsibilities, and rights of the employee.
The standard form provided below can be used when drawing up a job description for the chief power engineer of an enterprise.
Sample of a typical job description for a chief power engineer
I. General provisions
1. The chief power engineer belongs to the “managers” category.
2. Appointment to the position of chief power engineer or dismissal from it is made by order of the director of the organization on the recommendation of the chief engineer.
3. A person with a higher technical education and at least five years of experience in leadership positions in the industry relevant to the enterprise’s profile is appointed to the position of chief power engineer.
4. The chief power engineer reports directly to the chief engineer.
5. The chief power engineer in his work is guided by:
- regulatory legal acts of the Russian Federation;
- Charter of the organization;
- Internal labor regulations;
- orders, orders, instructions from the director of the enterprise, chief engineer and other management documents;
- this job description.
6. The chief power engineer must know:
- methodological materials on energy services of the organization;
- energy supply for production in the organization;
- features of the equipment used at the enterprise, production technology;
- technical characteristics, operating modes of power equipment, rules of its operation;
- a unified system of scheduled preventive maintenance and rational operation of equipment;
- the procedure for carrying out planned repairs;
- rules for acceptance and delivery of equipment;
- guidance materials on the preparation of technical documentation;
- energy resource consumption standards;
- basics of production organization and management;
- safety standards, labor protection, industrial sanitation and fire protection.
7. During the absence of the chief power engineer, his responsibility, functional duties, rights are transferred to another official, which is recorded in the order of the organization.
II. Job responsibilities of the chief power engineer
The chief power engineer performs the following functional responsibilities:
1. Establishes proper operation, scheduled repairs, replacement of energy and environmental equipment, energy systems, continuous supply of production with energy and resources.
2. Manages the planning and organization of the work of energy facilities.
3. Controls the rational use of energy resources at the enterprise and compliance with the economy regime.
4. Creates schedules for the repair of energy equipment and networks, plans for production, consumption of energy resources by the enterprise, consumption rates and modes of consumption of all types of energy.
5. Prepares applications and carries out calculations for:
- acquisition of power equipment, materials, spare parts;
- supplying electrical and thermal energy, connecting additional power to the enterprise;
- development of measures to reduce energy consumption standards;
- introduction of equipment that contributes to more reliable, economical, safe operation of power plants, and increased labor productivity.
6. Participates in the development of plans and proposals for:
- development of the energy sector;
- increasing production efficiency;
- introduction of means of mechanization and automation of production;
- reconstruction, re-equipment of the enterprise;
- modernization of the organization's energy systems;
- functioning of energy facilities.
7. Prepares conclusions on developed projects.
8. Participates in the acceptance and testing of power plants and networks.
9. Contributes to work to protect structures and communications.
10. Ensures timely presentation of boilers and pressure vessels to state technical supervision authorities.
11. Organizes inspection of alarms, communications, accounting, control, protection and automatic control systems.
12. Contributes to the development of measures to improve the efficiency of use of energy resources, reliability, efficiency of equipment operation, accident prevention, and the creation of safe working conditions.
13. Establishes control over compliance with labor protection and safety regulations, requirements for the operation of power plants, the use of power equipment, and communications.
14. Organizes storage, handling, accounting of equipment located at the enterprise, analysis of energy and fuel consumption, technical and economic indicators of the functioning of the energy sector, accidents and their causes.
15. Concludes agreements with organizations on the supply of energy resources to the enterprise and monitors their implementation.
16. Exchanges experience in operating energy equipment, rational use, and saving energy resources.
17. Prepares conclusions on rationalization proposals and inventions in relation to energy equipment and supplies.
18. Improves the organization of work in energy sector areas, certification of employees, introduction of rational methods of repair and operation of energy equipment.
19. Manages the divisions of the enterprise that provide energy services to production, organizes work to improve the skills of employees.
III. Rights
The chief power engineer has the right:
1. Represent the interests of the enterprise in relations with government authorities and other structures.
2. Send requests and obtain information necessary to perform their functional duties.
3. Check the work of the enterprise departments involved in energy services for the organization.
4. Send recommendations to the heads of structural divisions of the enterprise on issues of energy services for production.
5. Disconnect equipment from power networks in an unsatisfactory condition when a threat of an accident or an accident is identified.
6. Sign and endorse documents; issue orders on energy service issues.
7. Conduct correspondence with divisions of the enterprise and other organizations.
8. Make proposals to hold officials accountable based on the results of inspections.
9. Remove from work or transfer in accordance with the established procedure employees who have not passed the test of knowledge of safety rules and operation of power plants.
IV. Responsibility
The chief power engineer is responsible for:
1. Consequences of decisions made.
2. Use of enterprise property.
3. Violation of regulations and documents of the organization’s management.
4. Causing damage to the enterprise, its personnel, the state, and contractors.
5. Providing knowingly false or unreliable information to employees of the organization.
6. Improper performance of one’s official duties.
7. Disclosure of personal information, trade secrets, confidential data.
8. Violation of safety rules, labor discipline, internal labor regulations, fire protection.
9. Conducting meetings and representations of the interests of the enterprise that are not authorized by management.
Chief Power Engineer must meet the following qualification requirements - obtain a higher technical education and work experience in the specialty in engineering, technical and managerial positions for at least 5 years.
Job responsibilities of the chief power engineer
The chief power engineer organizes the technically correct operation and timely repair of energy and environmental equipment and energy systems, uninterrupted supply of electricity, steam, gas, water and other types of energy to production, control over the rational use of energy resources at the enterprise, and consistent adherence to the economy regime.
Manages the planning of the work of energy shops and farms, the development of schedules for the repair of energy equipment and energy networks, plans for the production and consumption of electricity, process fuel, steam, gas, water, compressed air by the enterprise, consumption rates and modes of consumption of all types of energy.
Ensures the preparation of applications and the necessary calculations for them for the purchase of energy equipment, materials, spare parts, for the supply of electrical and thermal energy to the enterprise and the connection of additional power to energy supply enterprises, the development of measures to reduce energy consumption rates, the introduction of new equipment that contributes to more reliable, economical and safe operation of power plants, as well as increasing labor productivity.
The chief power engineer participates in the development of plans for the long-term development of the energy sector, plans for increasing production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of complex mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in the preparation of technical assignments for the design of new and reconstruction of existing energy facilities.
Ensures that work is carried out to protect underground structures and communications, organizes inspections of communications, alarms, accounting, control, protection and automation, as well as timely submission of boilers and pressure vessels to the Gosgortekhnadzor inspection. Organizes the development of measures to improve the efficiency of use of fuel and energy resources, the reliability and efficiency of the operation of power plants, the prevention of accidents, and the creation of safe and favorable working conditions during their operation.
Monitors compliance with labor protection and safety regulations, instructions for the operation of power plants and the use of power equipment and networks.
The chief power engineer enters into contracts with third-party organizations to supply the enterprise with electricity, steam, water and other types of energy, and monitors their implementation.
Organizes storage, accounting for the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
Carries out work to exchange experience in the field of operation of energy equipment, ensures the introduction of scientific organization of labor in energy sectors, certification and rationalization of jobs, new progressive methods of repair and operation of energy equipment. Gives opinions on rationalization proposals and inventions related to the improvement of energy equipment and energy supply, organizes the implementation of accepted proposals.
The chief power engineer manages the employees of the department and divisions of the enterprise that provide energy services to production.
Feedback and suggestions can be sent to: [email protected]
The information is provided for informational purposes only and is not an official source.
Chief power engineer: requirements, knowledge and responsibilities
Few people know that in large factories and enterprises one of the most important people is the chief power engineer. It monitors the distribution of energy resources: electricity, heat. He also organizes reliable power supply and competent technical operation of energy systems, which affects the profitability of any enterprise. At any more or less large plant, this position is held in high esteem, but it requires a huge amount of knowledge and experience.
Main responsibilities
The chief power engineer is responsible for organizing the proper operation, repair and installation of power equipment, uninterrupted and reliable power supply to production. This official controls the consumption of energy resources and compliance with their saving regime. The department of the chief power engineer is engaged in planning, organizing and implementing the effective operation of the energy sector, developing schedules for the repair of equipment and electrical networks, plans for the production or consumption of electricity, fuel, gas, steam, water. This official is responsible for drawing up applications and calculations for them for the purchase of equipment, spare parts and necessary materials, for the supply of energy, for connecting additional power if necessary. Plans the prospects for the development of the energy sector, increasing the overall efficiency of production, prepares proposals for the reconstruction of the enterprise, and introduces process automation tools.
The job description of the chief power engineer necessarily includes the consideration of projects for the reconstruction of energy supply systems. The leading power engineer is obliged to give opinions on all developed electric power projects and take part in testing power installations and networks. He is also obliged to ensure the development of measures aimed at increasing the efficiency of resource use, increasing the reliability and operation of power plants, preventing accidents, and creating safe working conditions. The chief power engineer monitors compliance with labor protection rules, safety regulations, and all necessary operating instructions. He must and has the right to enter into contracts for the supply of electricity and other types of energy. This person organizes accounting and storage of energy equipment on the enterprise's balance sheet, analysis of fuel and electricity consumption. The chief power engineer manages all employees of his department, organizes work to improve their qualifications, recruits new personnel, deals with retraining issues if necessary, and carries out the necessary certification of personnel.
What should I know?
Methodological and regulatory materials on electrical power services of a particular enterprise. Must understand the specialization, profile and characteristics of the enterprise, opportunities and prospects, the basics of product production. Mandatory knowledge of the system of planned and preventive repairs includes his job description. The chief power engineer is also required to know the technical characteristics and operating features of the equipment at the enterprise, and the operating rules of these installations. The job description includes requirements for knowledge of the rules for accepting equipment after repair and installation, and environmental legislation. The chief power engineer must be able to conclude contracts for the supply of electricity and heat to the company.
Requirements
The chief engineer of an enterprise must have a higher technical education. In addition, at least five years of experience in a specialized specialty in administrative, technical and managerial positions in the relevant industry is required. In addition to having fairly extensive skills and knowledge, the leading power engineer is required to have organizational skills, since he manages his staff.
Services managed by the chief power engineer
There are several services that report to this official:
— electrical service, which includes operational, maintenance and duty personnel;
- heating engineering, which manages boiler rooms, drainage and water supply services and which includes plumbers and maintenance personnel;
— gas service, which includes employees involved in the repair and operation of gas systems.
Job description of the chief power engineer
"____" ____________ 20__
1.1. This job description defines the functional duties, rights and responsibilities of the chief power engineer of [Name of the organization in the genitive case] (hereinafter referred to as the Company).
1.2. The Chief Power Engineer is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. The Chief Power Engineer reports directly to [name of the position of the immediate supervisor in the dative case] of the Company.
1.4. The chief power engineer belongs to the category of managers and is subordinate to [the names of the positions of subordinates in the dative case].
1.5. A person with a higher professional (technical) education and professional experience in engineering, technical and management positions in the relevant sector of the national economy for at least 5 years is appointed to the position of chief power engineer.
1.6. The chief power engineer is responsible for:
- effective performance of the work assigned to him;
- compliance with the requirements of performance, labor and energy discipline;
- the safety of documents (information) in his custody (that have become known to him) containing (constituting) a trade secret of the organization.
2.1. Organizes the technically correct operation and timely repair of energy and environmental equipment and energy systems, uninterrupted supply of electricity, steam, gas, water and other types of energy to production, monitoring the rational use of energy resources at the enterprise, consistent adherence to the economy regime.
2.2. Manages the organization and planning of the work of energy workshops and farms, the development of schedules for the repair of energy equipment and energy networks, plans for the production and consumption of electricity, process fuel, steam, gas, water, compressed air by the enterprise, consumption rates and modes of consumption of all types of energy.
2.3. Ensures the preparation of applications and the necessary calculations for them for the purchase of energy equipment, materials, spare parts, for the supply of electrical and thermal energy to the enterprise and the connection of additional power to energy supply enterprises, the development of measures to reduce energy consumption standards, the introduction of new equipment that contributes to more reliable, economical and safe operation of power plants, as well as increasing labor productivity.
2.4. Participates in the development of plans for the long-term development of the energy sector, plans for increasing production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of complex mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in the preparation of technical specifications for design of new and reconstruction of existing energy facilities.
2.5. Gives opinions on developed projects, participates in testing and acceptance of power plants and networks for commercial operation.
2.6. Ensures the implementation of work to protect underground structures and communications, organizes the inspection of communications, alarms, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the bodies carrying out state technical supervision.
2.7. Organizes the development of measures to improve the efficiency of use of fuel and energy resources, the reliability and efficiency of operation of power plants, the prevention of accidents, and the creation of safe and favorable working conditions during their operation.
2.8. Monitors compliance with labor protection and safety regulations, instructions for the operation of power plants and the use of power equipment and networks.
2.9. Concludes contracts with third-party organizations to supply the enterprise with electricity, steam, water and other types of energy, and monitors their implementation.
2.10. Organizes storage, accounting for the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
2.11. Conducts work to exchange experience in the field of operation of power equipment, saving and rational use of fuel and energy resources, and promotes the achievement of high performance indicators in the operation of power plants.
2.12. Provides improvement of labor organization in energy sector areas, certification and rationalization of jobs, introduction of new progressive methods of repair and operation of energy equipment.
2.13. Gives opinions on rationalization proposals and inventions related to the improvement of energy equipment and energy supply, organizes the implementation of accepted proposals.
2.14. Manages the employees of the department and divisions of the enterprise that provide energy services to production, organizes work to improve the skills of workers.
In case of official necessity, the chief power engineer may be involved in performing his duties overtime, in the manner prescribed by the provisions of federal labor legislation.
The chief power engineer has the right:
3.1. Give instructions and tasks to his subordinate employees and services on a range of issues included in his functional responsibilities.
3.2. Monitor the implementation of production tasks, timely completion of individual orders and tasks by the services subordinate to him.
3.3. Request and receive the necessary materials and documents related to the activities of the chief power engineer, subordinate services and divisions.
3.4. Interact with other enterprises, organizations and institutions on production and other issues within the competence of the chief power engineer.
4. Responsibility and performance evaluation
4.1. The chief power engineer bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation, criminal) responsibility for:
4.1.1. Failure to carry out or improperly carry out official instructions from the immediate supervisor.
4.1.2. Failure to perform or improper performance of one's job functions and assigned tasks.
4.1.3. Illegal use of granted official powers, as well as their use for personal purposes.
4.1.4. Inaccurate information about the status of the work assigned to him.
4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.
4.1.6. Failure to ensure compliance with labor discipline.
4.2. The assessment of the work of the chief power engineer is carried out:
4.2.1. By the immediate supervisor - regularly, in the course of the employee’s daily performance of his labor functions.
4.2.2. The certification commission of the enterprise - periodically, but at least once every two years, based on documented results of work for the evaluation period.
4.3. The main criterion for assessing the work of the chief power engineer is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.
5.1. The work schedule of the chief power engineer is determined in accordance with the internal labor regulations established by the Company.
5.2. Due to production needs, the chief power engineer is required to go on business trips (including local ones).
5.3. Due to production needs, the chief power engineer may be provided with official vehicles to carry out his work functions.
6.1. To ensure his activities, the chief power engineer is given the right to sign organizational and administrative documents on issues included in his functional responsibilities.
I have read the instructions ___________/___________/ “____” _______ 20__
Responsibilities of the chief power engineer at the enterprise
1.1. This job description defines the functional duties, rights and responsibilities of the Chief Power Engineer of the enterprise.
1.2. The chief power engineer is appointed and dismissed in accordance with the procedure established by current labor legislation by order of the director of the enterprise.
1.3. The chief power engineer reports directly to the director of the enterprise.
1.4. A person with a higher professional (technical) education and professional experience in engineering, technical and managerial positions in the relevant industry profile of the enterprise is appointed to the position of Chief Power Engineer.
1.5. The chief power engineer must know:
— regulatory and methodological materials on energy services of an enterprise; profile, specialization and features of the organizational and energy structure of the enterprise, prospects for its development; fundamentals of energy production of enterprise products; organization of energy supply for production in the industry and enterprise; A unified system of scheduled preventive maintenance and rational operation of equipment; production capacities, technical characteristics, design features and operating modes of energy equipment, energy-using installations, rules of their operation; procedure and methods for planning equipment operation and carrying out repair work; labor during operation, repair and modernization of power equipment; the procedure for developing standards for the consumption of fuel and energy resources; the procedure for concluding contracts for the supply of electricity, steam, water and other types of energy to an enterprise; advanced domestic and foreign experience in the field of energy supply for production; fundamentals of economics, organization of production, labor and management; basics of labor legislation; rules and regulations of labor protection, regulatory and methodological materials on energy preparation of production; profile, specialization and features of the organizational and energy structure of the enterprise; prospects for technical development of the industry and enterprise; energy production of enterprise products; systems and design methods; organization of energy preparation of production in the industry and at the enterprise; production capacities, technical characteristics, design features and operating modes of equipment, rules of its operation; procedure and methods for planning energy preparation of production; technical requirements for raw materials, materials and finished products; regulations, instructions and other guidance materials on the development and execution of technical documentation; means of mechanization and automation of production processes; methods for determining the economic efficiency of introducing new technology and energy, labor organization, rationalization proposals and inventions; procedure for certification of the quality of industrial products; possibilities of using computer technology and methods for designing energy processes using them; procedure for accepting equipment into operation; requirements for rational organization of labor when designing energy processes; domestic and foreign achievements of science and technology in the relevant industry; advanced domestic and foreign experience in the production of similar products; fundamentals of economics, organization of production, labor and management; basics of environmental legislation; basics of labor legislation; rules and regulations of labor protection.
5.3. Due to production needs, the Chief Power Engineer may go on business trips (including local ones).
5.4. To resolve operational issues related to ensuring production activities, the Chief Power Engineer may be allocated official vehicles.
The job description specifies the scope of duties and work that must be performed by a person holding a certain position. The job description in accordance with the All-Russian Classifier of Management Documentation, or OKUD, OK 011-93 (approved by Gosstandart Resolution No. 299 of December 30, 1993) is classified as documentation on the organizational and regulatory regulation of the organization’s activities. The group of such documents, along with the job description, includes, in particular, internal labor regulations, regulations on the structural unit, and staffing.
Is a job description required?
The Labor Code of the Russian Federation does not oblige employers to draw up job descriptions. After all, an employment contract with an employee must always disclose his labor function (work according to the position in accordance with the staffing table, profession, specialty indicating qualifications or the specific type of work entrusted to him) (Article 57 of the Labor Code of the Russian Federation). Therefore, it is impossible to hold the employer liable for the lack of job descriptions.
At the same time, it is the job description that is usually the document in which the employee’s job function is specified. The instructions contain a list of the employee’s job responsibilities, taking into account the specifics of the organization of production, labor and management, the rights of the employee and his responsibilities (Letter of Rostrud dated November 30, 2009 No. 3520-6-1). Moreover, the job description usually not only reveals the employee’s job function, but also provides the qualification requirements that apply to the position held or the work performed (Letter of Rostrud dated November 24, 2008 No. 6234-TZ).
The presence of job descriptions simplifies the process of interaction between the employee and the employer on the content of the job function, the rights and responsibilities of the employee and the requirements placed on him. That is, all those issues that often arise in relationships with both existing employees and newly hired ones, as well as with applicants for a certain position.
Rostrud believes that a job description is necessary in the interests of both the employer and the employee. After all, having a job description will help (Letter of Rostrud dated 08/09/2007 No. 3042-6-0):
- objectively evaluate the employee’s activities during the probationary period;
- to reasonably refuse to hire (after all, the instructions may contain additional requirements related to the employee’s business qualities);
- distribute labor functions among employees;
- temporarily transfer the employee to another job;
- assess the integrity and completeness of the employee’s performance of his or her job functions.
That is why drawing up job descriptions in an organization is advisable.
Such instructions may be an annex to the employment contract or approved as an independent document.
How to draw up a job description
A job description is usually drawn up on the basis of qualification characteristics contained in qualification directories (for example, in the Qualification Directory of Positions of Managers, Specialists and Other Employees, approved by Resolution of the Ministry of Labor dated August 21, 1998 No. 37).
For workers who are hired by blue-collar professions, unified tariff and qualification directories of work and blue-collar professions for the relevant industries are used to determine their labor function. Instructions developed on the basis of such reference books are usually called production instructions. However, in order to unify and simplify internal documentation in an organization, instructions for blue-collar professions are often also called job descriptions.
When drawing up job descriptions, organizations are also guided by
We bring to your attention a typical example of a job description for a chief power engineer, sample 2019/2020. A person who has a higher professional (technical) education and work experience in his specialty in engineering, technical and managerial positions in the relevant industry profile of the enterprise for at least 5 years can be appointed to this position. Don’t forget, every instruction from the chief power engineer is handed out against a signature.
Typical information about the knowledge that the chief power engineer should have is presented. About duties, rights and responsibilities.
This material is part of the huge library of our website, which is updated daily.
1. General Provisions
1. The chief power engineer belongs to the category of managers.
2. A person who has a higher professional (technical) education and work experience in his specialty in engineering, technical and managerial positions in the relevant industry profile of the enterprise for at least 5 years is accepted for the position of chief power engineer.
3. The chief power engineer is hired and dismissed by the director of the organization.
4. The chief power engineer must know:
— regulatory and methodological materials on energy services of an enterprise;
— profile, specialization and features of the organizational and energy structure of the enterprise, prospects for its development;
— fundamentals of energy and production of enterprise products;
— organization of energy supply for production in the industry and at the enterprise;
— A unified system of scheduled preventive maintenance and rational operation of equipment;
— production capacities, technical characteristics, design features and operating modes of energy equipment, energy-using installations, rules of their operation;
— procedure and methods for planning equipment operation and carrying out repair work;
— regulations, instructions and other guidance materials on the development and execution of technical documentation;
— rules for acceptance and delivery of equipment after installation and repair;
— environmental legislation;
— requirements for rational organization of labor during operation, repair and modernization of power equipment;
— the procedure for developing standards for the consumption of fuel and energy resources;
— the procedure for concluding contracts for the supply of electricity, steam, water and other types of energy to an enterprise;
— advanced domestic and foreign experience in the field of energy supply for production;
— fundamentals of economics, organization of production, labor and management;
— basics of labor legislation;
— rules and regulations of labor protection, safety precautions, industrial sanitation and fire protection.
5. In his activities, the chief power engineer is guided by:
- legislation of the Russian Federation,
- Charter of the organization,
- orders and instructions of the director of the organization,
- this job description,
— Internal labor regulations of the organization.
6. The chief power engineer reports directly to ___________ (specify position)
7. During the absence of the chief power engineer (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization in the prescribed manner, who acquires the corresponding rights, duties and is responsible for the performance of the duties assigned to him.
2. Job responsibilities of the chief power engineer
Chief Power Engineer:
1. Organizes the technically correct operation and timely repair of energy and environmental equipment and energy systems, uninterrupted supply of production with electricity, steam, gas, water and other types of energy, control over the rational use of energy resources at the enterprise, consistent adherence to the economy regime.
2. Manages the organization and planning of the work of energy shops and farms, the development of schedules for the repair of energy equipment and energy networks, plans for the production and consumption of electricity, energy fuel, steam, gas, water, compressed air by the enterprise, consumption rates and modes of consumption of all types of energy.
3. Ensures the preparation of applications and the necessary calculations for them for the purchase of energy equipment, materials, spare parts, for the supply of electrical and thermal energy to the enterprise and the connection of additional power to energy supply enterprises, the development of measures to reduce energy consumption standards, the introduction of new equipment that contributes to more reliable , economical and safe operation of power plants, as well as increased productivity.
4. Participates in the development of plans for the long-term development of the energy sector, plans for increasing production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of means of comprehensive mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in the preparation of technical assignments for the design of new and reconstruction of existing energy facilities.
5. Gives opinions on developed projects, participates in testing and acceptance of power plants and networks for commercial operation.
6. Ensures the implementation of work to protect underground structures and communications, organizes the inspection of communications, alarms, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the bodies exercising state technical supervision.
7. Organizes the development of measures to improve the efficiency of use of fuel and energy resources, the reliability and efficiency of the operation of power plants, the prevention of accidents, and the creation of safe and favorable working conditions during their operation.
8. Monitors compliance with labor protection and safety rules, instructions for the operation of power plants and the use of power equipment and networks.
9. Concludes contracts with third-party organizations to supply the enterprise with electricity, steam, water and other types of energy, monitors their implementation.
10. Organizes storage, accounting for the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the operation of the energy sector, accidents and their causes.
11. Conducts work to exchange experience in the field of operation of power equipment, saving and rational use of fuel and energy resources, and promotes the achievement of high performance indicators in the operation of power plants.
12. Ensures the improvement of labor organization in energy sector areas, certification and rationalization of jobs, introduction of new progressive methods of repair and operation of energy equipment.
13. Gives conclusions on rationalization proposals and inventions relating to the improvement of energy equipment and energy supply, organizes the implementation of accepted proposals.
14. Manages the employees of the department and divisions of the enterprise that provide energy services to production, organizes work to improve the skills of workers.
15. Complies with the internal labor regulations and other local regulations of the organization.
16. Internal rules and standards of labor protection, safety, industrial sanitation and fire protection.
17. Ensures cleanliness and order in his workplace.
18. Carry out, within the framework of the employment contract, the orders of the employees to whom he is subordinate in accordance with these instructions.
3. Rights of the chief power engineer
The chief power engineer has the right:
1. Submit proposals for consideration by the director of the organization:
— to improve work related to the responsibilities provided for in this instruction,
- on encouraging distinguished employees subordinate to him,
- on bringing to material and disciplinary liability the employees subordinate to him who have violated production and labor discipline.
2. Request from structural divisions and employees of the organization the information necessary for him to perform his job duties.
3. Get acquainted with the documents defining his rights and responsibilities for his position, criteria for assessing the quality of performance of official duties.
4. Get acquainted with the draft decisions of the organization’s management relating to its activities.
5. Require the management of the organization to provide assistance, including ensuring organizational and technical conditions and execution of the established documents necessary for the performance of official duties.
6. Other rights established by current labor legislation.
4. Responsibility of the chief power engineer
The chief power engineer is responsible in the following cases:
1. For improper performance or failure to fulfill one’s job duties provided for in this job description - within the limits established by the labor legislation of the Russian Federation.
2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.
Job description of the chief power engineer - sample 2019/2020. Job responsibilities of the chief power engineer, rights of the chief power engineer, responsibility of the chief power engineer.
A job description is the main document for an employee in any position. This indicates all his main duties that he must perform at his workplace, depending on the nature of the position held and the specifics of the employer’s activities.
The employer is obliged to familiarize the applicant with this document before the employment contract is signed. After reading the instructions, the employee must put his signature on the last sheet. This suggests that he knows his job responsibilities and will strictly observe them. Only if the employee has the signature can he be subject to disciplinary action for failure to fulfill his official duties.
The instructions are drawn up by specialists from the HR and legal departments. The document must reflect all the nuances of this position. No employee should perform work beyond their duties specified in the job description.
Job responsibilities of an energy engineer
An energy engineer belongs to the category of specialists. His job responsibilities include:
- carrying out technical supervision of devices used at the enterprise;
- ensuring the preparation of boilers and vessels that operate under pressure, as well as steam and hot water pipelines;
- participation in testing energy networks and installations;
- acceptance for industrial operation of energy networks and installations;
- preparation of necessary materials for concluding contracts for equipment repair;
- ensuring uninterrupted operation of energy equipment, electrical and heating networks, air and gas pipelines;
- carrying out certification of environmental, energy and electrical installations installed at the enterprise;
- drawing up applications for the purchase of equipment, as well as materials and spare parts;
- control over the rational consumption of fuel and all types of energy;
- provision and testing of relay protection and automation equipment;
- control over the repair and reconstruction of power equipment;
- development and implementation of technical regulations and standards for energy equipment used at the enterprise;
- preparation of reports according to established forms;
- compliance with occupational safety and health standards and regulations.