Job description electrical laboratory technology
1. General Provisions.
1.1. These instructions define the duties, rights and responsibilities of a technician at a testing laboratory for electrical installations of buildings (ILEZ).
1.2. A technician is appointed to a position and dismissed from his position by Order General Director on the recommendation of the Head of the testing laboratory for electrical installations of buildings (ILEZ).
1.3. The technician reports directly to the Head of the testing laboratory for electrical installations of buildings (ILEZ).
1.4. A person with a higher or secondary specialized education or technical education without presenting requirements for work experience in the specialty or secondary education and work experience in the specialty of at least 3 years and with the skills to work on a PC is appointed to the position of ILEZ technician.
1.5. The technician works and reports according to a monthly and annual personal work plan. Menstruation and annual plans works, as well as unscheduled tasks are agreed upon (issued) by the head of the ILEZ.
1.6. This job description is revised at least once every three years and in cases of changes in regulatory documents (ND) and reorganization of the structure of the ILEZ or enterprise.
1.7. In his work, the technician is guided by:
Regulations on the testing laboratory;
State standards Complex GOST R-50571 “Electrical installations of buildings”;
"Rules for electrical installations"
knowledge about basic technological processes, EL equipment and rules of its operation
“Rules technical operation electrical installations of consumers";
“Inter-industry rules on labor protection (safety rules) during the operation of electrical installations”;
current regulatory technical documentation;
this job description.
Charter.
Instructions on measures fire safety in administrative and household production premises enterprises.
Internal rules labor regulations company employees.
Other regulations and instructions in force in the company.
2. Job responsibilities.
The testing laboratory technician (ILEZ) is obliged to:
2.1. Monitor the correctness of calculation and recording of measurement and test results in protocols and reports.
2.2. Monitor the serviceability of instruments and equipment, and report any malfunctions to the head of the testing laboratory.
2.3.Improve your technical level, study technical literature, foreign and domestic work experience.
2.4. Carry out work on mastering new instruments and methods for carrying out measurements and tests.
2.5.Study and analyze regulatory, legislative and teaching materials on issues of acceptance testing and certification in electrical installations of buildings and structures.
2.6.Participate in the development of corrective measures to eliminate the detected causes of non-compliance of electrical installations of buildings with certification requirements.
2.7. Strictly implement personal work plans and ILEZ work plans (monthly and annual).
3. Rights of ILEZ technician.
The technician has the right:
3.1.Represent the company at the direction of the General Director and Head of ILEZ in enterprises and organizations on issues related to the activities of ILEZ.
3.2.Participate in the preparation of documents and instructions on ILEZ related to the organization of work during measurements and tests in electrical installations and the subsequent registration of measurement and test results.
3.3. Contact the head of the ILEZ for help and clarification if difficulties arise in resolving production issues.
3.4.Visit in in the prescribed manner enterprises to fulfill their official duties.
3.5. Obtain information necessary for work from any available sources.
4. Responsibility.
The ILEZ technician is responsible for:
4.1. High-quality and timely performance of measurements and tests in electrical installations of buildings and structures, and preparation of documents on the measurements and tests carried out.
4.2. Serviceability and safety of instruments and ILEZ equipment used when carrying out measurements and tests in electrical installations.
4.3. Violation of state, industry standards and other normative documents, as well as the use of faulty and untested measuring instruments and equipment.
4.4. Issuance of unfounded, unreliable data based on the results of measurements and tests.
4.5. Implementation of orders and instructions from the management of the enterprise and ILEZ related to its production activities.
4.6. Ensuring the confidentiality of commercial information obtained as a result of its activities.
4.7. Timely, complete and high-quality execution of all your job responsibilities.
4.8. Compliance with the requirements of the Safety Rules and compliance with production instructions.
4.9.Correct use of the rights granted to them.
4.10. Compliance with internal labor regulations.
4.11. Implementation of approved annual and monthly personal work plans and department work plans.
1. General position
1. An electrician laboratory technician belongs to the ETL repair staff.
2. An ETL laboratory technician is required to pass the appropriate knowledge test on PTEEP, PUE, POT RM-016-2007 tests and measurements, pass an exam at Rostechnadzor and receive the appropriate admission group for working in electronics. installations up to 1000, with the issuance of a certificate of the established form and allowed to carry out tests and measurements, gr. not lower than III.
3. Pass medical examination in due time.
4. A newly appointed electrical laboratory assistant undergoes an internship and is assigned by order to an experienced worker.
5. Admission to independent work must be formalized by an appropriate order from the head of the organization.
6. ETL electrical laboratory assistant reports to the boss.
2. Responsibilities
1. Laboratory electrician ETL conducts electrical tests. installations up to 1000 V. in accordance with approved programs and methods within the list of permitted tests.
2. Ensure the reliability, objectivity and required accuracy of test results,
3. Undergo continuous training and advanced training.
3. Rights
1. Refuse to carry out tests if they are associated with a violation of the requirements of the current Rules and may lead to accidents or damage to the equipment being tested.
2. Require from the customer technical documentation for the electrical installation being tested to the extent necessary for testing.
4. Responsibility
1. For failure to comply, or improper execution their duties as provided for in the job description.
2. 3a deviation from test methods and programs, resulting in the provision of unreliable or incomplete test results to the customer.
3. ETL personnel who violated PTEEP, PUE, POT RM-016-2007 resulting in accidents are liable (disciplinary, administrative or criminal) in accordance with current legislation.
1. GENERAL OCCUPATIONAL SAFETY REQUIREMENTS
1.1. This Instruction provides basic labor protection requirements for the supervisor electrical engineering laboratory.
1.2. The head of the electrical laboratory must perform his duties in accordance with the requirements of these Instructions.
1.3. The head of an electrical engineering laboratory may be exposed to the following dangerous and harmful production factors:
increased noise and vibration levels;
dangerous voltage level in an electrical circuit, the closure of which can occur through the human body;
increased level of static electricity;
increased surface temperature of the product and equipment;
fire and explosion hazard;
driving mechanisms and machines.
1.4. Persons at least 18 years of age who have been trained in the appropriate program and certified by the qualification commission in the prescribed manner and have received permission to work independently are allowed to work as the head of an electrical laboratory.
1.5. The head of the electrical laboratory is provided with special clothing and safety footwear in accordance with current standards.
1.6. The head of the electrical laboratory must have an appropriate electrical safety group.
1.7. The head of an electrical laboratory must know and strictly comply with the requirements for labor protection, fire safety, and industrial sanitation.
1.8. The head of the electrical laboratory notifies his immediate supervisor about any situation that threatens the life and health of people, about every accident that occurs at the workplace, about a deterioration in his health, including the manifestation of signs of an acute illness.
1.9. When carrying out measurements, fire safety requirements must be met in accordance with the requirements of GOST 12.1.004-91 and the Fire Regulations in the Russian Federation.
1.10. Work with harmful and explosive substances must be carried out with switched on ventilation systems using personal protective equipment.
1.11. The presence of unauthorized persons in the working space of the equipment during its measurements is not allowed.
1.12. Repair of equipment and maintenance of automation and measuring instruments must be carried out in accordance with the technical documentation of the organization that developed the technological process.
1.13. The head of an electrical engineering laboratory must undergo training in labor protection in the form of: introductory briefing, initial briefing in the workplace and special training within the scope of the training program for the profession, including labor protection issues and requirements for job responsibilities in the profession.
Induction training is carried out by an employee of the labor protection service or an employee replacing him with all those hired according to a program approved by the employer and agreed upon with the trade union committee or other representative body of workers.
Initial training at the workplace is carried out by executive, determined by order individually before the start of the employee’s production activities under the occupational safety program by profession.
1.14. The head of the electrical engineering laboratory must know:
laws and other regulations legal acts Russian Federation, methodological and regulations relating to the operation and repair of automation, protection and instrumentation of relevant equipment;
rules of technical operation, diagrams, operational characteristics and operating principles of equipment automatic devices, technological protections and instrumentation of the electrical laboratory;
operational standards for equipment operation and testing;
First aid instructions;
be able to provide first aid to victims.
1.15. Smoking and eating are allowed only in places specially designated for this purpose.
2. OCCUPATIONAL SAFETY REQUIREMENTS BEFORE STARTING WORK
2.1. Wear the protective clothing, safety shoes and personal protective equipment required by the relevant standards. Overalls must be fastened.
2.2. Measurements and tests should be carried out according to programs and methods, technical conditions. Measurements and tests of electrical equipment and electrical installations newly put into operation are carried out in accordance with the standards provided for by the rules for the construction of electrical installations (PUE), the requirements of manufacturing organizations, the requirements of standards, and measurements and tests existing electrical installations electrical equipment - to the extent of the requirements of the norms and rules of their operation. Testing facilities (electrical laboratories) must be registered with Rostechnadzor.
2.3. Admission according to orders or orders to carry out measurements and tests is made only after other teams working on the equipment to be tested or measured have left the workplace and they have handed over the orders or reported the completion of work according to the order.
2.4. The preparation of the object and measuring instruments for testing or measurements should be carried out in the absence of voltage and residual charge on them. The operating voltage and residual charge must also be removed from other objects (other parts of test and measurement objects), unless touching or voltage to them is excluded, or these objects must be fenced off during preparation and testing.
2.5. The assembly of test and (or) measuring circuits should be carried out in the absence of voltage and residual charge at the test and (or) measurement object or part thereof, at the means of measuring and (or) testing.
2.6. The test or measurement site must be fenced.
2.7. Safety signs (posters) with explanatory inscriptions should be hung on fences, not lower than in the locations of parts of test objects (measurements). Safety signs and barriers should be removed only after the test (measuring) load and residual charge have been removed.
2.8. Prepare the necessary materials to carry out the work protective equipment and devices.
2.9. Do not allow untrained or unauthorized persons to perform your work.
2.10. Check the lighting condition of the workplace.
2.11. Check the serviceability of grounding, the presence and serviceability of fire-fighting equipment, the availability of personal protective equipment, operation ventilation units, electrical equipment. All exposed and accessible moving parts of the equipment must be protected with secured guards.
2.12. Check that you have a first aid kit and primary funds fire extinguishing equipment, personal protective equipment.
2.13. Report all detected malfunctions of equipment, inventory, electrical wiring and other problems to your immediate supervisor and begin work only after they have been eliminated.
3. OCCUPATIONAL SAFETY REQUIREMENTS DURING WORK
3.1. Work only in working clothing and safety shoes and use personal protective equipment.
3.2. Carry the tool to the workplace only in a special bag or box.
3.3. In electrical installations, it is not allowed for people, mechanisms and lifting machines to approach unprotected live parts that are energized at a distance of up to 1 kV on an overhead line - 0.6 m, from mechanisms and lifting machines - 1 m.
3.4. Work with guards, blocking and other devices in place and in good working order. When carrying out electrical measurements and tests, direct contact of the worker with components and elements that have a dangerous or harmful effect must be eliminated.
3.5. Extremely valid values touch voltages and currents during emergency operation of industrial electrical installations with voltages up to 1000 V with a solidly grounded or insulated neutral.
3.6. Dangerous areas at work sites and workplaces must be marked with appropriate safety signs.
3.7. When carrying out tests (measurements), the connection of measuring instruments, as well as the installation and removal of electric meters to check them, are carried out after the voltage has been removed.
3.8. Connecting and disconnecting test and measurement equipment at test (measurement) objects that have moving parts must be performed after these parts have come to a complete stop.
At the same time, it is necessary to prevent the unintended launch of such objects during connections.
3.9. Accession connecting wire to the equipment being used (measured) or to the cable (bus, wire, etc.) and disconnect it only after they are grounded.
3.10. Before each switching on of the test (measuring) installation it is necessary:
Remove unauthorized persons;
Warn all team members about the voltage supply with words;
Remove the ground from the terminal of the test installation and apply a voltage of 380/220 V to it.
3.11. When applying the test voltage, the operator must stand on an insulating mat.
3.12. From the moment the voltage is applied, it is not allowed to make any reconnections on the test (measuring) circuit.
3.13. Before starting tests or measurements, it is prohibited for persons to be near the test (measuring) device or to touch its live parts that are under the test (measuring) voltage of the electrical installation.
3.14. The supply of test (measuring) voltage to the test (measurement) object is allowed after the removal of personnel from the test (measuring) field and prior notification with an audio signal.
3.15. During the period of testing (measurements) on equipped electrical installations that are under test (measuring voltage), it is not allowed to carry out repair, installation and adjustment work on them.
3.16. Short-term electrical contact of measuring (test) instruments with the test (measurement) object is carried out with flexible wires ending in probes.
3.17. All measurements (tests) must be carried out in the presence of warning (prohibiting) posters.
3.18. Not allowed:
Smoking;
Performing work using open fire;
The use of electric tools that produce sparks and electrical lighting fixtures in an explosive design.
3.19. Do not eat in the workplace.
3.20. Work in sufficient light.
3.22. Place foreign objects and tools at a distance from moving vehicles and machinery.
3.23. Don't clutter workplace, passages and passages to it, passages between equipment, racks, passages to control panels, switches, evacuation routes and other passages of empty containers, equipment, excess supplies of materials, etc.
3.24. Follow the rules of movement in the premises and on the territory of the organization, use only designated passages.
3.25. If any violations are detected, turn off the equipment and notify the supervisor.
4. OCCUPATIONAL SAFETY REQUIREMENTS IN EMERGENCIES
4.1. If an equipment breakdown occurs that threatens an accident at the workplace: stop its operation, as well as the supply of electricity, gas, water, raw materials, product, etc.; report on measures taken to the immediate supervisor (the person responsible for the safe operation of the equipment) and act in accordance with the instructions received.
4.2. In an emergency: notify people around you of the danger, report to your immediate supervisor about the incident and act in accordance with the emergency response plan.
4.3. In case of a chemical burn, immediately rinse the affected area with plenty of running water. cold water from a tap, rubber hose or bucket for 15-20 minutes. If acid or alkali gets on the skin through clothing, you must first wash it off with water from the clothing, and then rinse the skin.
4.4. If splashes of alkali or vapors get into the eyes or mouth, rinse the affected areas with plenty of water and then with a solution boric acid(0.5 teaspoon of acid per glass of water).
4.5. In the event of a fire, you must:
Stop working;
Disable the equipment being used;
Call the fire brigade, inform the work manager and begin extinguishing the fire using available means.
4.6. If there is a fire at electrical installations, use carbon dioxide and powder fire extinguishers.
4.7. If there are wounds, apply a bandage; if there is arterial bleeding, apply a tourniquet.
4.8. In case of injury, poisoning or sudden illness, the victim must be provided with first (pre-medical) aid and, if necessary, his delivery to a healthcare facility must be organized.
4.9. If acid gets on the floor, it should be neutralized (sprinkle with soda or quicklime) and only then clean with a shovel and rinse with water. Clothes drenched in acid should be washed with plenty of water, neutralized with a 2-3% soda solution and replaced.
4.10. If any malfunction is detected that disrupts normal operation, it must be stopped. Inform your immediate supervisor of any observed shortcomings.
4.11. In the event of an accident, it is necessary to provide the victim with first aid, if necessary, call an ambulance, inform your immediate supervisor and keep the situation at the workplace unchanged until the investigation, unless it creates a threat to workers and does not lead to an accident.
5. OCCUPATIONAL SAFETY REQUIREMENTS AFTER WORK COMPLETION
5.1. Reduce the voltage of the test (measuring) installation to 0.
5.2. Disconnect the installation from the mains supply.
5.3. Ground the installation terminal.
5.4. Disconnect power supplies.
5.5. Report any shortcomings noticed during work to your immediate supervisor.
5.6. Take off protective clothing, put away personal protective equipment, protective clothing in the designated place.
5.7. Wash your face and hands warm water with soap or take a shower.
Job Description for Maintenance Electrical Engineer utility networks I approve. P. Job description of an electrical engineer for the maintenance of utility networks.
An electrical engineer for the maintenance of utility networks belongs to the category of specialists and is directly subordinate. An electrical engineer for the maintenance of utility networks is appointed to the position and dismissed from it by order. A person who has a higher vocational (technical) education without requirements for work experience or a secondary vocational (technical) education and work experience as a technician of the 1st category for at least three years or in other positions filled is accepted for the position of electrical engineer for the maintenance of utility networks. specialists with secondary vocational (technical) education for at least five years. An electrical engineer for the maintenance of utility networks must know: - laws and other regulatory legal acts of the Russian Federation, methodological and regulatory documents on maintenance and repair of electrical equipment and electrical networks; — prospects for the development of the organization; — fundamentals of the organization’s production technology; — organizing the organization’s supply of electricity; - systems planned and preventive repair and rational operation of electrical equipment and electrical networks; — specifications, design features, operating modes, operating rules, procedures and methods for planning the operation of electrical equipment and repair work; — methods for developing energy consumption standards; — the procedure for drawing up cost estimates for repair work; — fundamentals of economics, organization of production, labor and management; — basics of labor legislation; - security rules environment; — internal labor regulations; — rules of sanitary and personal hygiene; — rules and regulations of labor protection, safety and fire protection.
Job responsibilities. An electrical engineer for the maintenance of utility networks is assigned the following job responsibilities: 2. Managing the process of approving the design, construction and commissioning of utility networks ( electrical systems). Organization of the receiving process technical specifications. Control over the design process of external engineering networks (electrical systems).
Coordination of the design of external engineering and internal engineering networks (electrical systems). Organization and creation of temporary engineering networks for the construction period (electrical systems). Assisting and supporting the process of commissioning utility networks (electrical systems).
Of course, the job description of a laboratory assistant in a medical office and a physical laboratory will be very different. But you can easily . Job description for the head of an electrical laboratory. Large Download the job description for the head of an electrical engineering laboratory to your computer. Engineers, blue-collar workers. This job description has been developed and approved in accordance with the repair of electrical equipment and electrical networks. Head of electrical operation and repair service. This job description defines the responsibilities ( permanent jobs), rights and .
Participation in the process of moving existing utility networks off-site (electrical systems). Participation in the process of preparing tenders for the design and construction of internal and external on-site utility networks. Assisting in the creation technical specifications for concluding a contract for general contracting work.
Job description for the head of an electrical laboratory. The head of the electrical engineering laboratory reports to
Download the job description of a notary secretary Job description of a chief engineer Job description of a senior Job description of the head of an electrical laboratory Job description of a chief. A person with a higher education degree is appointed to the position of head of a laboratory. professional education by specialty. 1.13. The engineer’s service area is electrical equipment located on the territory and on the balance sheet of the district. Of course, the job description of a laboratory assistant in a medical office and a physical laboratory will be very different.
Supervising the performance of work by contractors engineering systems. Checking the scope of work performed. Verification of estimates, commercial proposals, and design documentation.
Organization technically correct operation and repair of utility networks (electrical systems). Development of repair schedules for utility networks.
Participation in the preparation of applications, calculations and justifications for them for the purchase of equipment, materials and spare parts for repair work. Development of repair instructions, safe operation engineering networks (electrical systems). Monitoring compliance by organizational units with rules for technical operation and maintenance of utility networks (electrical systems). Carrying out technical examination and certification of engineering networks (electrical systems). Participation in the work of commissions for certification of personnel for a qualification group and for the right of admission to service utility networks (electrical systems).
Carrying out inspection control over compliance with technical operation rules and the condition of utility networks during repair work. Participation in the development of plans for the long-term development and modernization of utility networks (electrical systems). Giving opinions on the introduction of new progressive methods of operating utility networks. Rights. An electrical engineer for the maintenance of utility networks has the right: 3.
For all social guarantees provided for by the legislation of the Russian Federation. Receive information about the activities of the organization necessary to perform functional duties from all departments directly or through the immediate superior. Submit proposals to management to improve your work and the work of the organization. Get acquainted with draft orders of management relating to its activities. Sign and endorse documents within your competence. Take part in meetings where issues related to his work are discussed. Require management to create normal conditions to perform official duties.
Increase your professional qualifications. Other rights provided for labor legislation Russian Federation. Responsibility. The electrical engineer for the maintenance of utility networks is responsible for: 4. For failure to perform, improper performance of duties provided for this instruction, within the limits determined by the labor legislation of the Russian Federation. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.
The job description has been developed in accordance with.
Information about: Job description for the head of an electrical engineering laboratory - 12 comment(s) added. I need a job description for an engineer, who carries out these measurements and makes reports, etc. The device is good, reliable and does not hang. Job description of the chief engineer of a linear enterprise. Job description of the head of the laboratory (bureau) for labor organization .
Job description of the head of the electrical laboratory [name]
This job description has been developed and approved in accordance with the Order of the Ministry of Health and social development RF dated December 10, 2009 N 977 “On approval of the Unified qualification directory positions of managers, specialists and employees, section " Qualification characteristics positions of employees of nuclear energy organizations and other legal acts regulating labor relations.
1. General Provisions
1.1. The head of the electrical engineering laboratory belongs to the category of managers and is directly subordinate to [name of the manager's position].
1.2. A person who has a higher professional (technical) education and work experience in an electrical laboratory for at least 3 years (at a power plant for at least 5 years) is hired for the position of head of an electrical engineering laboratory.
1.3. The head of the electrical engineering laboratory is appointed and dismissed by order of [name of the manager's position].
1.4. The head of the electrical engineering laboratory must know:
Laws and other regulatory legal acts of the Russian Federation, methodological and regulatory documents relating to the operation and repair of automation equipment, protection and instrumentation of relevant equipment;
Rules of technical operation, diagrams, operational characteristics and principles of operation of equipment of automatic devices, technological protections and instrumentation of the electrical laboratory;
Operating standards for equipment operation and testing;
Domestic and Foreign experience in the field of activity of the electrical engineering laboratory;
Fundamentals of economics, organization of production, labor and management;
Fundamentals of labor legislation;
Environmental Regulations;
Labor protection and fire safety regulations;
Internal labor regulations.
1.5. Professionally important qualities: [list qualities].
1.6. In his absence, the duties of the head of the electrical laboratory are performed by: [fill in as necessary].
2. Job responsibilities
The head of the electrical engineering laboratory is assigned the following job responsibilities:
2.1. Manages the electrical laboratory, ensuring the operation and repair of automation and relay protection equipment, control and measuring instruments of the relevant energy equipment, organizes the equipping of the equipment with equipment and measuring instruments necessary for testing and monitoring its operation.
2.2. Manages the ongoing and periodic monitoring of the operation of power plant equipment.
2.3. Organizes setup, commissioning and provides normal work of all devices, equipment and instruments under the jurisdiction of the laboratory, draws up instructions and instructions for their maintenance.
2.4. Manages the preparation and participates in testing of equipment assigned to the laboratory.
2.5. Monitors the timely registration of test results and maintenance of technical documentation.
2.6. Monitors the condition of laboratory equipment and workplaces of laboratory workers, takes measures to eliminate deficiencies.
2.7. Ensures the introduction of new equipment, the dissemination of advanced techniques and work methods in the laboratory.
2.8. Monitors employees' compliance with labor protection, environmental protection, and fire safety rules.
3. Employee rights
The head of the electrical engineering laboratory has the right:
3.1. Request and receive necessary information and documents related to issues of its activities.
3.2. Make proposals to the immediate supervisor to improve work related to the responsibilities provided for in this job description.
3.3. Give binding orders to employees of the electrical engineering laboratory.
3.4. Remove from work persons who violate safety and fire safety rules when performing work.
3.5. Take part in meetings where issues related to his work are discussed.
3.6. On favorable conditions for professional activities.
3.7. Require management to provide assistance in the performance of their professional duties and rights.
3.8. To improve their qualifications in the manner established Labor Code Russian Federation and other federal laws.
3.9. For all social guarantees provided for by law.
3.10. [Indicate other employee rights].
4. Responsibility of the employee
The head of the electrical engineering laboratory is responsible for:
4.1. For failure to perform or improper performance of one’s job duties as provided for in this job description - within the limits determined by the current labor legislation of the Russian Federation.
4.2. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.
4.3. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, and civil legislation of the Russian Federation.
The job description has been developed in accordance with [name, number and date of document].
Head of HR department
[signature]
[initials, surname]
[day month Year]
Agreed:
[job title]
[signature]
[initials, surname]
[day month Year]
I have read the instructions:
[signature]
[initials, surname]
[day month Year]