Ariel's house. "Ariel

"Ariel" is an excellent home for long-term living. Building area 44.57 sq. m., and its dimensions are 7 by 7.5. There is a garage.

We will be happy to build a house according to this project. The cost of construction depends on the selected configuration. Please note - we are ready to change the project layout for free or build a house according to any of your projects or sketches.

Construction costs may differ from those posted on the website.

Equipment options

Complete set of frame houses

Foundation

Pile-screw

Tape

Sand cushion: 300 mm

Power frame

Frame strapping: timber 150*150 mm
Vertical racks made of chamber-dried planed boards (14-18% humidity), 1 grade, 150*50 mm
The pitch of the racks is no more than 580 mm, using a reinforced fastening system and additional protection of the frame from “cold bridges”
To protect the frame: the outer side is a four-layer diffusion membrane, the inner side is a three-layer polyethylene film

Interior partitions

Vertical racks made of chamber-dried planed boards (14-18% humidity), 1st grade, 100*50 mm.
The frame posts are mounted on both sides with a vapor-permeable Izospan membrane.

Internal load-bearing walls and partitions

To protect the roofing system: the outer side is a four-layer diffusion membrane, the inner side is a three-layer polyethylene film.

Thermal insulation from environmentally friendly slab basalt insulation ROCKWOOL LIGHT BATTS or Paroc EXTRA

External walls - 3 layers (150 mm).
Interior partitions - 2 layers (100 mm)
Interfloor ceilings - 2 layers (100 mm)
Attic floor (second floor ceiling) - 3 layers (150 mm)

Roofing - metal tiles

Steel thickness: 0.5mm
Assorted colors

Exterior facade decoration

(Egger/Kalevala, class E1)

Interior wall decoration

Moisture-resistant OSB-3 board, 2500*1250*9 mm

Window

Profile thickness 70mm
Fittings: ROTO NT

Complete set of block houses

Foundation

Sand cushion: 400 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

External and internal load-bearing walls

All wooden structures are antiseptic in two layers, with a special fire-bio protective composition. Installation of the power frame of the house is carried out using a galvanized fastening system with double reinforcement.

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5mm
Assorted colors
Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm

Window

REHAU SIB-Design PVC window structures, standard sizes
Profile thickness 70 mm
2-chamber double-glazed window (3 glasses), 5-chamber profile (white), mosquito nets
Fittings: ROTO NT

Complete set of brick houses

Foundation

Tape monolithic heavily reinforced pile-grillage

Plinth height 600 mm, tape width 400 mm
Bored reinforced piles with a diameter of 200 mm, a depth of 2000 mm
Sand cushion: 400 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

Reinforced basement and interfloor floor joists are made of 50*200 mm boards, with a pitch of no more than 580 mm
First floor subfloor being installed

External and internal load-bearing walls

External load-bearing walls made of aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
Internal load-bearing walls made of aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
Reinforcement of masonry every three rows
Aerated concrete (gas silicate) blocks are placed on a special masonry adhesive
Decorated window and door openings
Installation of brick reinforced belts under floors

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5mm
Assorted colors
Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm
A four-layer diffusion membrane is used to protect the roofing system

Window

REHAU SIB-Design PVC window structures, standard sizes
Profile thickness 70 mm
2-chamber double-glazed window (3 glasses), 5-chamber profile (white), mosquito nets
Fittings: ROTO NT

Complete set of timber houses

Wall material to choose from

Solid timber

Advantages:

Affordable price
Wide use
Minimum delivery times
Easy to assemble at home

Flaws:

Additional costs for finishing or sharpening
Imperfect appearance
Additional costs for antiseptic
Increased cracking

Glued laminated timber

Advantages:

Excellent appearance
Very low shrinkage and shrinkage
Does not crack
Does not require additional processing

Flaws:

Increased price
Reduced vapor permeability of the material

Profiled timber

Advantages:

Great looks
Making connections with overhangs (into the bowl)
Tighter connection between crowns and at corner joints

Flaws:

The need for a break for shrinkage
The appearance of cracks on the surface over time

Foundation

Pile-screw

VS-108/300/2500mm, TU 5260-001-84045723-2011
Piles are driven using special equipment
Pile wall thickness 4 mm, blade thickness 5 mm
Inside the piles are filled with M300 concrete mixture
The metal head is welded, 200*200 mm
The pile is covered with a 2-component factory protective compound

Tape

Plinth height 600 mm, tape width 300 mm
Sand cushion: 300 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

Reinforced basement floor joists are made of 50*200 mm boards, with a pitch of no more than 580 mm
Reinforced interfloor joists are made from planed chamber-drying boards of grade 1, 50*200 mm (14-18% humidity), with a pitch of no more than 580 mm

External and internal load-bearing walls

External walls and gables made of timber 150*150 mm (possibly 200*200 mm)
Internal load-bearing walls made of timber 150*150 mm (possibly 200*200 mm)
Inter-crown insulation “jute fiber” or “flax batting” is laid between the beams in 2 layers.
The corners of the house are assembled using the “warm corner” technology
Installation of timber crowns is carried out on a wooden dowel

Roof

Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm
Step-by-step lathing 100*25 mm
Temporary roofing material made of roofing felt is being installed

↓

Complete set of log houses

Wall material to choose from

Rounded (calibrated) log
Carriage (Norwegian cabin)
Planed log
Shaped log
Barked log

Foundation

Pile-screw

VS-108/300/2500mm, TU 5260-001-84045723-2011
Piles are driven using special equipment
Pile wall thickness 4 mm, blade thickness 5 mm
Inside the piles are filled with M300 concrete mixture
The metal head is welded, 200*200 mm
The pile is covered with a 2-component factory protective compound

Tape

Plinth height 600 mm, tape width 300 mm
Sand cushion: 300 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

Reinforced basement floor joists are made of 50*200 mm boards, with a pitch of no more than 580 mm
Reinforced interfloor joists are made from planed chamber-drying boards of grade 1, 50*200 mm (14-18% humidity), with a pitch of no more than 580 mm

External and internal load-bearing walls

External walls and gables made of logs 240 mm (possibly 280 mm)
Internal load-bearing walls made of logs 240 mm (possibly 280 mm)
Inter-crown insulation “jute fiber” or “flax batting” is laid between the logs in 2 layers.
Dowels, sealing tape for sealing
Beams - treated with fire-bioprotective composition.

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5mm
Assorted colors
Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm
A four-layer diffusion membrane is used to protect the roofing system

Complete set of houses from SIP panels

Foundation

Pile-screw

VS-108/300/2500mm, TU 5260-001-84045723-2011
Piles are driven using special equipment
Pile wall thickness 4 mm, blade thickness 5 mm
Inside the piles are filled with M300 concrete mixture
The metal head is welded, 200*200 mm
The pile is covered with a 2-component factory protective compound

Tape

Plinth height 600 mm, tape width 300 mm
Sand cushion: 300 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Thermal insulation

External walls - non-flammable polystyrene foam (150 mm)
Interior partitions - environmentally friendly slab basalt insulation (100 mm)
The floor of the first floor is non-flammable polystyrene foam (150 mm)
Attic floor (second floor ceiling) - environmentally friendly slab basalt insulation (100 mm)

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5mm
Assorted colors

Exterior facade decoration

Ventilated facade: counter-lattice made of timber 35*35 mm
Painted galvanized ebbs are mounted on the base along the outer perimeter

Interior wall decoration

Moisture-resistant OSB-3 board, 2500*1250*9 mm

Window

REHAU SIB-Design PVC window structures, standard sizes
Profile thickness 70mm
2-chamber double-glazed window (3 glasses), 5-chamber profile (white), mosquito nets
Fittings: ROTO NT

“Double timber” is a perfect technology for constructing wooden houses. The technology allows you to build a house made of wood in the shortest possible time - very warm, environmentally friendly and not subject to shrinkage.

Foundation on screw piles

Geodetic works (alignment of axes, leveling);
Express soil geology;
Installation works of screw piles;
Screw piles h=2500 mm, d=108 mm;
Installation of a strapping grillage with a cross-section of 150*340 mm with antiseptic treatment;
Waterproofing of pile heads with Stekloizol.

Wall kit

A set of walls made in a factory from planed profiled timber, chamber dried (humidity 12%-14%);
Tongue-and-groove system in a vertical connection, branded double lock, specialized metal fasteners;
Construction of a system of interfloor ceilings: 1st floor - transport moisture beam with a cross-section of 50*200 mm, specialized metal fasteners, 2nd floor: profiled wooden chamber-drying panels integrated into the walls with a cross-section of 45*270 mm, specialized metal fasteners;
Installation of the bottom sheathing (transport moisture board 25 mm thick);
Installation of insulating film membranes (preparation for insulation with high density insulation);
Antiseptic treatment of logs, beams, sheathing.

Roof

Construction of a rafter system (transport humidity beams 200 mm high, specialized metal fasteners);
Installation of double sheathing (transport moisture board 25 mm thick);
Distance slats (transport moisture beam with a cross-section of 50*50 mm) to ensure roof ventilation;
Installation of insulating film membranes;
Flooring of roofing material "Profnastil" C21 with a polymer coating with additional roofing elements (ridge, end, eaves strips);
Antiseptic treatment of rafters, sheathing, spacer strips.

Insulation of a wooden house with Ecowool insulation

Insulation of walls, partitions, gables (thickness 130 mm, unique resistance to heat transfer, unsurpassed sound insulation);
Roof insulation (thickness 200 mm);
Floor insulation (thickness 200 mm).

Antiseptic treatment

Treatment of a wooden house (walls, partitions, gables - interior, facade) with a complex wood-protective compound "Lignofix" (Czech Republic) manually in 1 layer.

Guest house "Ariel" is located in the village of Vityazevo in the resort town of Anapa. The guest house consists of one two-story building. It’s nice to sit in a large, shady, clean courtyard covered with grapes and take refuge from the heat.
You will be pleased with the clean, well-groomed area. There are numerous tubs of flowers in the yard. There is also a covered gazebo covered with grapes. This is a relaxation area where you can have a pleasant time talking or eating in the open air. In the gazebo there are wooden tables with benches and two soft comfortable sofas.
There is a corner with toys in the yard for children. There is a parking lot for seven cars.
Location and territory
A grocery store and pharmacy are 100 meters from the guest house. Also nearby is the Aquamarine sanatorium. If you wish, you can purchase coursework for treatment there. Your children will not be bored - there are children's attractions just 500 m away. In addition, at the same distance there are numerous cafes, canteens and entertainment centers.
Distance from the sea: 900 m
Accommodation
"Ariel" has eight one-room rooms. Three rooms are on the first floor, five are on the second. By the way, on the second floor there is a common balcony, from which a magnificent view of the village of Vityazevo and the sea opens.
Four rooms with private facilities. The rooms have: TV, fan, bathroom with shower, wardrobe, bedside tables, three beds. It is possible to install an additional seat (there are no discounts for it).
The remaining four rooms: two rooms have one shower and toilet. Each room has: TV, fan, wardrobe, bedside tables, three beds. It is possible to install an additional seat (there are no discounts for it).
Nutrition
The guest house has a shared kitchen for self-catering. It is equipped with everything necessary - a gas stove, tables, two refrigerators, and a set of dishes.
It is possible to deliver meals to your home from cafes and canteens. In addition, within walking distance from the guest house there are numerous cafes and canteens where you can have a snack or order a full set lunch for a reasonable fee.
Beach
The sandy beach is a 15-minute walk from the Ariel Guest House. The beach is famous for its healing properties, as it consists of quartz sand and feldspars. Its width is about 80 meters. There are several reed buildings on the central beach. They contain bars, cafes, and tables with chairs. Some changing rooms are also made of reeds. Sun loungers can be rented.
Water entertainment includes: slides, water rides, jet skiing, and boat rides. You can play beach volleyball. In the evenings there are discos.
Facilities and service
Use of barbecue, possibility of organizing excursions.
Paid: transfer, home delivery of groceries, use of parking (100 rubles per day).
Vacation with children
Children are accepted without age restrictions. For children, there is a corner with toys in the courtyard of the guest house. Just 500 meters from "Ariel" there are children's attractions.
Additional Information:
- Animals: You can bring animals in agreement with the management of the guest house.
- Documents: passport, children – birth certificate.
- Checkout time: In fact. If guests check out in the morning, there is no charge for that day.
- Check-in duration: no restrictions.
- Water supply: hot and cold water around the clock.
- Nature of operation: from May to October.

"Ariel" is an excellent home for long-term living. The area of the house is 44.57 square meters, and its dimensions are 7 by 7.5. There is a garage.

Our company will be happy to build a house according to this project. The total cost of construction depends on the selected configuration. Please note - we are ready to remodel the project free of charge or build a house according to any of your projects or sketches.

The final cost of construction may differ slightly from that posted on the website.

Equipment options

Complete set of frame houses

Foundation

Pile-screw

Tape

Sand cushion: 300 mm

Power frame

Frame strapping: calibrated board 150*50 mm
Vertical racks made of calibrated boards 150*50 mm
The pitch of the racks is no more than 580 mm, using a reinforced fastening system and additional protection of the frame from “cold bridges”
To protect the frame: the outer side is a four-layer diffusion membrane, the inner side is a three-layer polyethylene film

Interior partitions

Vertical racks made of chamber-dried planed boards (14-18% humidity), 1st grade, 100*50 mm.

Rafter system

Thermal insulation from environmentally friendly slab basalt insulation ROCKWOOL LIGHT BATTS, Paroc EXTRA or ECOVER

External walls - 3 layers (150 mm).
Attic floor (second floor ceiling) - 4 layers (200 mm)

Roofing - metal tiles

Steel thickness: 0.45 mm
Assorted colors

Exterior facade decoration

Imitation timber, 17-20 mm thick

Interior wall decoration

Drywall 2500*1200*12.5 mm

Interior ceiling decoration

Drywall 2500*1200*12.5 mm

Interior floor finishing

Draft board, thickness 25 mm

Window

Veka VHS PVC window structures, standard sizes
Profile thickness 58 mm
2-chamber double-glazed window (3 glasses), 4-chamber profile (white), mosquito nets
Fittings: Winkhaus

Complete set of block houses

Foundation

Sand cushion: 400 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

External and internal load-bearing walls

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5mm
Assorted colors
Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm

Window

Profile thickness 70 mm
Fittings: ROTO NT

Complete set of brick houses

Foundation

Tape monolithic heavily reinforced pile-grillage

Plinth height 600 mm, tape width 400 mm
Bored reinforced piles with a diameter of 200 mm, a depth of 2000 mm
Sand cushion: 400 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

Reinforced basement and interfloor floor joists are made of 50*200 mm boards, with a pitch of no more than 580 mm
First floor subfloor being installed

External and internal load-bearing walls

External load-bearing walls made of aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
Internal load-bearing walls made of aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
Reinforcement of masonry every three rows
Aerated concrete (gas silicate) blocks are placed on a special masonry adhesive
Decorated window and door openings
Installation of brick reinforced belts under floors

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5mm
Assorted colors
Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm
A four-layer diffusion membrane is used to protect the roofing system

Window

REHAU SIB-Design PVC window structures, standard sizes
Profile thickness 70 mm
2-chamber double-glazed window (3 glasses), 5-chamber profile (white), mosquito nets
Fittings: ROTO NT

Complete set of timber houses

Wall material to choose from

Solid timber

Advantages:

Affordable price
Wide use
Minimum delivery times
Easy to assemble at home

Flaws:

Additional costs for finishing or sharpening
Imperfect appearance
Additional costs for antiseptic
Increased cracking

Glued laminated timber

Advantages:

Excellent appearance
Very low shrinkage and shrinkage
Does not crack
Does not require additional processing

Flaws:

Increased price
Reduced vapor permeability of the material

Profiled timber

Advantages:

Great looks
Making connections with overhangs (into the bowl)
Tighter connection between crowns and at corner joints

Flaws:

The need for a break for shrinkage
The appearance of cracks on the surface over time

Foundation

Pile-screw

VS-108/300/2500mm, TU 5260-001-84045723-2011
Piles are driven using special equipment
Pile wall thickness 4 mm, blade thickness 5 mm
Inside the piles are filled with M300 concrete mixture
The metal head is welded, 200*200 mm
The pile is covered with a 2-component factory protective compound

Tape

Plinth height 600 mm, tape width 300 mm
Sand cushion: 300 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

Reinforced basement floor joists are made of 50*200 mm boards, with a pitch of no more than 580 mm
Reinforced interfloor joists are made from planed chamber-drying boards of grade 1, 50*200 mm (14-18% humidity), with a pitch of no more than 580 mm

External and internal load-bearing walls

External walls and gables made of timber 150*150 mm (possibly 200*200 mm)
Internal load-bearing walls made of timber 150*150 mm (possibly 200*200 mm)
Inter-crown insulation “jute fiber” or “flax batting” is laid between the beams in 2 layers.
The corners of the house are assembled using the “warm corner” technology
Installation of timber crowns is carried out on a wooden dowel

Roof

Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm
Step-by-step lathing 100*25 mm
Temporary roofing material made of roofing felt is being installed

↓

Complete set of log houses

Wall material to choose from

Rounded (calibrated) log
Carriage (Norwegian cabin)
Planed log
Shaped log
Barked log

Foundation

Pile-screw

VS-108/300/2500mm, TU 5260-001-84045723-2011
Piles are driven using special equipment
Pile wall thickness 4 mm, blade thickness 5 mm
Inside the piles are filled with M300 concrete mixture
The metal head is welded, 200*200 mm
The pile is covered with a 2-component factory protective compound

Tape

Plinth height 600 mm, tape width 300 mm
Sand cushion: 300 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

Reinforced basement floor joists are made of 50*200 mm boards, with a pitch of no more than 580 mm
Reinforced interfloor joists are made from planed chamber-drying boards of grade 1, 50*200 mm (14-18% humidity), with a pitch of no more than 580 mm

External and internal load-bearing walls

External walls and gables made of logs 240 mm (possibly 280 mm)
Internal load-bearing walls made of logs 240 mm (possibly 280 mm)
Inter-crown insulation “jute fiber” or “flax batting” is laid between the logs in 2 layers.
Dowels, sealing tape for sealing
Beams - treated with fire-bioprotective composition.

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5mm
Assorted colors
Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm
A four-layer diffusion membrane is used to protect the roofing system

Complete set of houses from SIP panels

Foundation

Pile-screw

VS-108/300/2500mm, TU 5260-001-84045723-2011
Piles are driven using special equipment
Pile wall thickness 4 mm, blade thickness 5 mm
Inside the piles are filled with M300 concrete mixture
The metal head is welded, 200*200 mm
The pile is covered with a 2-component factory protective compound

Tape

Plinth height 600 mm, tape width 300 mm
Sand cushion: 300 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Internal load-bearing walls and partitions

Performed using frame technology
Vertical racks made of chamber-dried planed boards (14-18% humidity), 1st grade, 100*50 mm and 150*50 mm

Roofing system

To protect the roofing system: the outer side is a four-layer diffusion membrane, the inner side is a three-layer polyethylene film.

Thermal insulation

External walls - non-flammable polystyrene foam (150 mm)
Interior partitions - environmentally friendly slab basalt insulation (100 mm)
The floor of the first floor is non-flammable polystyrene foam (150 mm)
Attic floor (second floor ceiling) - environmentally friendly slab basalt insulation (100 mm)

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5mm
Assorted colors

Exterior facade decoration

Moisture-resistant OSB-3 board, 2500*1250*9 mm (Egger/Kalevala, class E1)
Ventilated facade: counter-lattice made of timber 35*35 mm
Painted galvanized ebbs are mounted on the base along the outer perimeter

Interior wall decoration

Moisture-resistant OSB-3 board, 2500*1250*9 mm

Window

REHAU SIB-Design PVC window structures, standard sizes
Profile thickness 70mm
2-chamber double-glazed window (3 glasses), 5-chamber profile (white), mosquito nets
Fittings: ROTO NT