Electric saw Interskol PC 16/2000T belongs to the domestic market segment. The tool connects to a standard electrical outlet and consumes 2000 watts of power. The maximum cutting depth achievable by the device is 38 cm. The chain speed is at Idling equal to 14 m/s. Despite its modest dimensions of 475x190x235 mm, the Interskol PTs 16 2000T electric saw has an impressive weight of 6 kg (including chain and bar).
The device of a chain saw Interskol PC-16 2000t
The assembled electric saw Interskol PC 16 2000T consists of the following components:
- Casing (housing);
- Handles (front and back);
- Chain bar and saw chain;
- Chain brake handle;
- Power off buttons (main and secondary);
- Tensioner flywheel and its retainer;
- Keys, caps, caps and case (included).
There is an electric motor inside the housing. It serves to drive the saw and gearbox. The Interskol PTs 16 2000T electric saw has 2 types of brakes - manual and automatic.
The tool is not intended for use in wet conditions, including during precipitation. It is also not recommended to use the Interskol PC 16 2000T electric saw in a faulty condition or with damaged elements.
Chain Interskol PC-16/2000t
For electric saws Interskol PC 16 2000T, chains with a pitch of 3/8″ are used. The manufacturer recommends using the OREGON 91VG-57E chain in combination with the 16″ OREGON 160 SDEA041 bus. In such a chain, the thickness of the elements is 1.3 mm, and their number is 57. When working with the Interskol PTs 16 2000T electric saw, burrs may form on the working chain due to wear. They should be removed by timely sharpening the chain.
Announcement:
Electric saw chain Interskol PC 16 2000T You can't force work chain design. Chain in in this case will become overtightened, which will lead to the need for its replacement or tightening. IN mandatory it should be lubricated. Lack of lubrication will lead to rapid wear and jamming.
Technical characteristics of the electric saw Interskol PC-16/2000T
- Voltage - 220 V
- Frequency - 50 Hz
- Power - 2000 W
- Tire length - 40 cm
- Chain pitch - 3/8 inch
- Engine location - longitudinal
- Chain rotation speed - 14 m/sec
- Dimensions - 55*19*265 mm
- Weight - 5.7 kg.
Reviews of the chain saw Interskol PC-16/2000T
Nikolay: experience in using Interskol PC-16 2000T for more than a year
Advantages:
Price, electric drive, safety, case, balance, convenience, power.
Flaws:
Oil supply is unstable.
Review: I bought an Interskol PTs-16 saw for garden plot: collecting firewood for the stove and barbecue, eliminating a couple of dozen is not too much big trees. It was lucky that the electricity was already supplied; I didn’t want to breathe in the exhaust of the chainsaw.
There is enough power even for fairly thick round pieces; it gnaws wet wood confidently, just don’t press hard. After using chainsaws, I had to get used to the features a little, but this happens with any tool. The device is well balanced, apparently due to the rear longitudinal position of the heavy engine. The handles of this chain saw are located conveniently, it is easy to guide the saw both horizontally and vertically.
Two switches on different handles in combination with an electromagnetic brake – a big plus for safety. The mechanical brake is applied without looking, in one short movement. The plunger oil pump is quite capricious, so as not to clean the channels every now and then, it is better to fill in oil with a viscosity corresponding to the air temperature. Personally, I use a liquid spindle.
A solid plastic cover for the chain is convenient for transportation, and it also protects the chain from dirt in the stowed position. In general, for a summer residence stable supply electricity is very good.
Michael: experience using Interskol PC-16/2000T for more than a year
Advantages:
Sufficient power for all types of wood. Low price, reliability, safety, high-quality assembly.
Flaws:
No
Review:
This Interskol model is an excellent saw. It bites into wood instantly. It cuts through knots 10-15 cm in diameter like clockwork. In half an hour I cut down 3 fruit trees and sawed them into 15-20 cm pieces. Only positive emotions. He eats little butter.
if you have Vacation home, dacha, you have decided to make a large item out of wood or to carry out renovation work, then you should think about purchasing a quality electric saw. However, this tool has some disadvantages, for example, in the case of chain models, the working part will have to be lubricated and sharpened from time to time. If this is not done, the chain may increase the load on the engine. In general, such equipment is quite expensive, and not every consumer will be able to purchase it. But one might prefer amateur model, which will cost less.
Disadvantages of electric saws
In conditions country house or dachas, where voltage drops in the network are quite frequent, thermal protection will also be necessary. If you do not take care of its presence when using the tool, then the risk of fire at the “heart” of the equipment can increase several times. However, even if thermal protection is used, performance under conditions undervoltage will be less. However, these shortcomings are perhaps among the main ones. Overall, a power saw is a piece of equipment that can handle many tasks. The main thing is to choose a manufacturer so that the equipment lasts longer. An excellent example to consider would be the Interskol electric saw, reviews of which you can read below, as well as information about repair features and characteristics.
Characteristics of the chain saw brand PC-16/2000 T
This model costs 6800 rubles. She represents electric chain saw - universal tool, used for working with wood. Excellent balancing, which is complemented by a reduced vibration level, as well as an ergonomic handle, provides the operator with comfortable work with the saw. The saw set is lubricated automatically; this functionality is provided by a plunger pump.
The saw is environmentally friendly; during operation it does not emit harmful gases into the atmosphere, which allows you to work with it even indoors. Such Interskol chain saws, reviews of which you can read below, have quite impressive power. In the case of the described model, this parameter is 2000 W. The engine in the design is located lengthwise. The length of the tire is 40 cm. The equipment weighs 5.7 kg. The chain rotates 14 m per second. The chain pitch is 3/8 inch.
The Interskol PC 16/2000t electric saw has compact dimensions of 550x190x265 mm. The tire length is 16 inches. The groove width is 1.3 mm. It is important to consider before purchasing that there is no keyless adjustment in the design. The equipment operates from a 220 V network. The device has 57 links.
Reviews about the model
Consumers who have already enjoyed the quality of the saw described above note that it is distinguished by many positive features, among which we should highlight:
- reliable control;
- efficient sawing;
- work safety.
As for control, it is provided by the main handle, with which you can grip the saw as tightly as possible. Efficient sawing also attracts consumers, it is guaranteed by a chain and saw bar that can handle different types of wood. The Interskol PC 16/2000t electric saw is also distinguished by its safety.
The design has an inertia brake, which, with strong kickback, will be able to instantly stop the chain. This functionality also works when you touch the protective shield with your hand. Additional benefits consumers think high power engine, the presence of additional motor brake coils that will turn off the circuit when the power is turned off. The design has a fairly long saw bar, as well as effective system protection against unintentional start-up.
Technical characteristics of circular saw brand DP-210/1900 M
This model is a fairly powerful design, which is designed for professional use. The device can handle sawing to a depth of 75 mm, and you can work with:
- board;
- laminate;
- plywood.
The manufacturer made sure that the equipment has quite impressive power. The unit is powered by a 1900 W motor. This allows you to use 210 mm discs. Overload protection is provided by the function soft start. The operation of the saw is simplified by the listed characteristics, and reliable system protection increases service life.
The described Interskol electric saw, reviews of which you can read below, has a disk mounting diameter of 30 mm. There is no speed control in the design. The device weighs 6.2 kg. The maximum cutting depth at an angle of 45° is 53 mm. Before purchasing, it is important to consider the dimensions of the device; for this model they are 270 x 354 x 254 mm. The rpm is 5000. An additional advantage is the soft start option. The operator will have the ability to work with the guide bar.
Reviews about the model
The above-described Interskol electric saw, reviews of which should help you make right choice, according to buyers, has many positive features, namely:
- ease of use;
- cleanliness in the workplace;
- possibility of adjusting the angle of inclination.
The operator will be able to keep the workplace clean thanks to a special pipe with which you can connect a vacuum cleaner to remove sawdust. Ease of use is guaranteed by reliable fixation of the tool, because the operator will be able to hold the equipment using two comfortable handles.
Additional features
You can adjust the tilt angle from 0 to 45 o. Buyers consider the reliability of the design, the presence of a soft start system and constant electronics to be additional advantages. It is impossible not to highlight the compactness, the presence of protection functionality against accidental activation and the presence of a carbide in the kit. saw blade. You can adjust the cutting depth quite easily, I especially like this one home craftsmen. The equipment is universal, which is why consumers often choose it.
Model operating instructions
If you are interested in the Interskol electric saw, it is recommended that you read reviews about it before purchasing the equipment. From them you can find out that the saw should be used only after studying the operating instructions. In it, the manufacturer emphasizes that power tools are a source of increased danger. It is important to ensure the safety of the workplace before starting up the equipment. It should be kept clean with good lighting. If workplace cluttered or poorly lit, it may cause an accident. Unauthorized persons and children should not be allowed near the electric machine during operation.
When you read the instructions, you may consider the Interskol electric saw circuit. From it you can understand that the plugs must fit the sockets of the equipment; this must be ensured before you start using the device. The plug should not be replaced by yourself. When working, it is necessary to use personal protective equipment, this applies to work clothes, glasses and a respirator.
Safety regulations
All wrenches and adjusters must be removed before operating the tool. You should not try to reach anything while you are operating the saw. It is not recommended to use the unit if it is faulty. When the machine is not working, it should be kept out of the reach of children. Cutting tools must be kept clean and sharp.
Electric chain saw repair
Interskol chain saws, reviews of which you could read above, sometimes fail. This can happen for several reasons. If the equipment does not turn on, it is necessary to check the power supply, integrity and wire connections. If everything is in order in the power supply, then you need to look at the chain brake, because it is this that can block the operation. To fix the problem, you need to move the brake flap. If the above measures do not help to turn on the tool, you need to make sure that the plug and cable are working properly.
When the power of the saw decreases, it is necessary to replace the carbon brushes, which wear out from time to time. Sometimes it happens that the chain for the Interskol electric saw stops only after a while, and not when it is needed. As the operating life of the unit increases, this time period may increase. In order to fix the problem, you need to replace the saw brake band, because it tends to wear out. Sometimes when working with a tool it appears unpleasant sound, it may occur due to insufficient oil or contamination of the conductive grooves. You can fix the problem by adding oil and cleaning the grooves.
When making repairs, you need to use only original spare parts for the Interskol electric saw; the cost of some of them will be discussed below. If you notice that the housing has been damaged, then for safety you need to have the structure repaired. The cutting parts of the tool must not be replaced unless recommended by the manufacturer. Sometimes craftsmen try to replace parts that do not fit the design.
Recommendations for extending the life of the saw element
Before starting work, you should make sure that there are no hard metal objects in the workpiece. If cutting element will come into contact with them, then chips and nicks will remain on the chain, and it will be quite difficult to get rid of them. Repair of the Interskol electric saw should not be carried out on the ground, because in this case the soil can get into the oil grooves, as a result of which the chain will remain without a mask and will wear out.
It is important to monitor the wedge of the tool; it should not be allowed, because in this case the metal overheats, which leads to a decrease in service life. If you purchased an Interskol electric saw, the price of which was mentioned above, then you should know how to determine when sharpening should be done. To do this, you should pay attention to the chips; if they are darker and smaller, this indicates that the chain has become dull. This fact is due to the fact that blunt edges do not remove the cutting layer, which leads to crushing of the material. The quality of sharpening will be determined visual inspection. Saw chain should not have radii, torn areas or damage. Cutting edge and the tooth shape should be the same as they were on the new instrument.
Cost of some spare parts
When using the tool, you may need a new anchor. The Interskol electric saw, no matter how high-quality it is, needs to replace spare parts from time to time. The mentioned unit, for example, will cost the consumer 1,600 rubles. But a sharpening kit can be purchased for 830 rubles. A saw blade for wood with a seat diameter of 30 mm will cost the consumer 500 rubles. As for the “Quick Cut” saw blade, you will have to pay 690 rubles for it.
Download video and cut mp3 - we make it easy!
Our site is great tool for entertainment and relaxation! You can always watch and download online videos, funny videos, hidden camera videos, feature films, documentaries, amateur and home video, music videos, videos about football, sports, accidents and disasters, humor, music, cartoons, anime, TV series and many other videos are completely free and without registration. Convert this video to mp3 and other formats: mp3, aac, m4a, ogg, wma, mp4, 3gp, avi, flv, mpg and wmv. Online Radio is a selection of radio stations by country, style and quality. Online Jokes are popular jokes to choose from by style. Cutting mp3 into ringtones online. Video converter to mp3 and other formats. Online Television - these are popular TV channels to choose from. TV channels are broadcast absolutely free in real time - broadcast online.
Interskol PC-16 2000T
Electric saws Interskol PC 16 / 2000Т belongs to the domestic market segment. The device is connected to a standard power source and consumes 2000 W. The maximum cutting depth achievable by the machine is 38 cm. The no-load speed of the chain is 14 m/s. Despite its modest dimensions of 475x190x235 mm, the Interskol PCP 16 2000T electric saw has an impressive weight of 6 kg (including chain and bar).
Interskol PC-16 2000t chain saw device
The assembled electric saw Interskol PC 16 2000T consists of the following blocks:
- Housing (body);
- Handles (front and back);
- Chain bar and saw chain;
- Chain brake handle;
- Off (main and additional);
- Flywheel tensioner and retainer;
- Keys, caps, caps and cover (included).
Read also
Photo of chain saw Interskol PC 16 2000t
There is an electric motor inside the housing. It serves to drive the saw and gearbox. Electric saws Interskol PC 16 2000T have 2 types of brakes. manual and automatic.
The tool is not intended for use in wet conditions, including precipitation. It is also not recommended to use Interskol PC 16 2000T electric saws in a faulty condition or with damaged elements.
Chain Interskol PC-16/2000t
For Interskol galvanization, PC 16 circuits 2000T are used with a pitch of 3/8". The manufacturer recommends using OREGON 91VG-57E in combination with a 16" OREGON 160 SDEA041 bus. In such a chain, the thickness of the elements is 1.3 mm, and their number is 57. When working with the Interskol PCP-2000T electric saw, burrs may form on the working chain due to wear. They should get rid of them when.
Interskol PC-16. DIY repairs.
Budget electric saw repair for only a thousand rubles. Disassembling the saw Interskol PC—16 .
Electric saw "Interskol PC-16/2000T".
Read also
I present a short review electric saws Interskol PC—16 /2000T. The saw worked for two seasons. Quality so far.
You can't force a chain to build. In this case, the chain will be stretched, which will lead to braces. It must be smeared without fail. Lack of lubrication will lead to rapid wear and jamming.
Technical characteristics of electric saws Interskol PC-16 / 2000T
- Voltage. 220 V
- Frequency. 50 Hz
- Power. 2000 W
- Tire length 40 cm
- Chain pitch. 3/8 inch
- Engine location longitudinal
- Chain rotation speed. 14 m/s
- Dimensions. 55 19 265 mm
- Weight. 5.7 kg.
Reviews of chain saws Interskol PC-16 / 2000T
Nikolay: experience using Interskol PC-16 2000T for more than a year
Advantages:
Price, electric drive, safety, cover, balance, convenience, power.
Flaws:
Oil supply is unstable.
Let's remember: I bought a saw for Interskol PC-16 for a garden plot: firewood for the stove and barbecue, eliminating a couple of dozen not too large trees. It was lucky that the electricity was already put in, I didn't want to breathe in the chainsaw.
The power is sufficient even for fairly thick roundworms; wet wood gnaws confidently, but you don’t need to press too hard. After the chainsaw got used to its functions a little, but this happens with any tool. The device was well balanced, and the rear longitudinal arrangement of the heavy engine was obviously visible. The handles of this chain saw are conveniently located, making it easy to guide the saw both horizontally and vertically.
Two switches on different handles combined with an electromagnetic brake. a big plus for safety. The mechanical brake is cut without looking, with one short movement. Plunger oil pump quite capricious, so do not clean the channels from time to time, it is better to fill in oil that corresponds to the air temperature in viscosity. Personally, I use liquid spindle.
Solid plastic cover The chain is convenient for transportation, and the chain protects from contamination in the stowed position. In general, it is very good for a summer residence with a stable supply of electricity.
Michael: experience using Interskol PC-16 / 2000T for more than a year
Advantages:
Enough power for any tree. Low price, reliability, safety, build quality.
Flaws:
No
Feedback:
This model of the excellent Interskola saw. Bites into wood instantly. Knots with a diameter of 10-15 cm saw like a clock. Within half an hour he cut 3 fruit tree and cut them to 15-20 cm. Only positive emotions. They eat little oil.