Garage strays. Homemade workbenches and racks - we make accessories for the garage

We will send the material to you by e-mail

For rational use of space, communications and do-it-yourself garage accessories from scrap materials are used. It is necessary to involve walls, an underground level in the process, place it indoors, and organize normal lighting.

Homemade gadgets for the garage

For comfortable operation of a room intended for car storage, you should adhere to certain recommendations:

Depending on the dimensions of the building, the area occupied by equipment, fixtures, and communications should not be more than 10–20% of the size of the garage floor.

Storage areas, racks, workbenches

In 80% of cases, do-it-yourself garage fixtures are built to store accessories, tools, and vehicle equipment. It should be taken into account that the most bulky parts of the car are sets of winter/summer tires, depending on the season.

The main nuances of these designs are:

The width of the pit should allow the driver to enter it without lighting.

Lighting and ventilation

In garages, parallel circuits of lighting fixtures are more often used. One lamp allows you to use a specific area, several devices are turned on during a major renovation or a visit to the cellar. Minimum power consumption is ensured. Daylighting devices have a great resource.

Cars use toxic, harmful fuels and lubricants, so do-it-yourself garage ventilation devices that allow you to create air exchange are becoming relevant. The influx is organized from below:

garage - vents in the masonry, protected by bars;
cellar - pipe from the garage or from the street.

The hood is mounted under the ceiling of the cellar, the roof of the garage, or has the form of vents in the main walls at the highest points.

Related article:

Other useful ideas

Useful accessories for the garage with your own hands can be made from used dishes, equipment, and materials left over from construction. For example, by gluing the lids of plastic cans horizontally/vertically, the owner receives convenient transparent containers for equipment or hardware, which are always at hand.

Homemade machines

You can also assemble accessories for the garage from power tools:

drilling - a drill fixed with clamps in a device that moves with a gear along a rack;

cutting - an angle grinder clamped in a similar way with equipment for metal or wood;

The advantage of the machines is more accurate positioning of the equipment relative to the workpiece. The equipment turns out to be dismountable, the drill and angle grinder can be removed and used for their intended purpose.

Related article:

Hydropress

The simplest design is obtained from a car hydraulic jack. To press out/press in bearings and press/compress parts, you will need to build a frame and a removable movable stop. The frame consists of 4 channels welded to each other. At the top, the structure is reinforced with stiffening ribs (kerchiefs), and at the bottom, transverse corners are added, giving the frame stability.

The stop is pulled in the normal position to the top crossbar of the frame by powerful springs. A hydraulic jack is installed between them, pressing the stop against the lower crossbar of the frame as necessary. The press force is regulated by a jack, the dimensions of the working area are selected depending on the size of the workpieces.

And finally, a few more examples of useful things for the garage.

As they say, there is never too much space in the garage. Men who spend a lot of time in the garage will agree that in some cases every minute and every square centimeter of free space counts. That is why a garage master needs competent organization of his workspace. Various people help out and help here in every possible way. devices for storing building materials and work equipment, machine parts and other things necessary for work. To ensure that your electronic, garden and garage gadgets are always in their place, use the following devices:

- stands;
- shelves;
- retractable panels;
- racks;
- organizers for tools.

Also, for clarity, we offer do-it-yourself homemade products for the garage and home craftsman - the YouTube video will reveal all the nuances of organizing the workspace and suggest fresh ideas.

DIY crafts at home with your own hands

Man has been making homemade crafts since prehistoric times. Actually, all industrial processes are the improved once handicraft or home-made developments of folk craftsmen. Sometimes we don’t even think about the fact that we pay for things that we can do with our own hands. DIY homemade schemes are easy to find online, and the materials can be purchased at a hardware store or found at home.

For example, from a cardboard box and a piece of fabric You can make a convenient portable organizer for towels and other textiles.
The topic of storing all sorts of little things is inexhaustible, fortunately, as is the number of ideas. Good ideas for decor You can also draw from ordinary things - let them be buttons or empty tin cans.
Cool shelves are made from ordinary drawers. How do you like this idea?

As you have already understood, if you have detailed instructions, it is not so difficult to make homemade products with your own hands at home. The video will help you understand all the nuances of this enjoyable activity. Useful tips, interesting ideas - everyone should watch it.

DIY crafts for the garden and garden with your own hands

At the dacha there is usually some free time for creativity and arrangement of the surrounding space. That's why It's worth having a few fresh ideas on hand to implement them on your own summer cottage. Do-it-yourself country crafts at home can be brilliantly simple. From scrap materials you can make unexpected and extremely useful things for home use.

Ordinary pebbles turn into fairy-tale animals.From an old teapot It makes a wonderful flower pot.

Used tires- this has already become a classic in the world of garden figures. Stylish lamps for country interiors – do it yourself from an ordinary jar and candles (don’t forget about safety precautions).
- a great idea for a small cottage.
Do-it-yourself homemade products for the garden and garden are often made by yourself, without unnecessary time and financial costs. Perhaps you had no idea how useful they would be for the household plastic bottles. Plastic bottles that have gone out of use can serve as the basis for an incredible decorative flower bed. Cool “blooming” pillars will significantly decorate your garden space.

Do-it-yourself garden furniture, successful homemade products: photos and drawings

In the previous sections, we told you about homemade products that will become indispensable for the household and home life. However, we should not forget about rest, before which, nevertheless, you will have to work a little. Cozy armchairs, various tables and benches, swings and hammocks- all this country and garden bliss can settle on your site. We invite you to familiarize yourself with photo instructions and drawings for making garden furniture. We have selected the best options for you.

The article discusses the most convenient and practical do-it-yourself garage accessories that can improve the operating comfort of this room. Here are detailed recommendations for the development and creation of structures designed for convenient storage of tools and car parts, tips for making furniture, as well as arranging lighting and heating systems.

The garage is intended not only for storage, but also for servicing the car. For this reason, this room must be spacious, clean, comfortable and well-equipped.

To achieve all this, it is enough to take into account the basic requirements regarding the organization of space:

The presence of shelves for tires and tool storage significantly saves free space and allows you to optimize space.
The quality of lighting is of great importance, since not only productivity, but also the quality of minor repair work depends on it.
The construction of a garage workbench, machines, inspection pit and other devices expand the range of possibilities of the car owner in relation to vehicle repair and maintenance.

Helpful advice! All these elements should not occupy space exceeding 10-20% of the garage area.

Options for shelves in the garage with your own hands: photos and tips for arranging storage spaces

About 80% of the shelves in the garage are built with your own hands to store garage accessories, namely:

tools and additional devices;
components for the car;
accessories.

Often in photos of shelves in a garage with your own hands you can see them combined with a rack, which you can also make yourself. Most often, the rack is considered as the main place for storing tools. After its installation, the remaining space is filled with comfortable and spacious shelves.

Be sure to designate a place where work clothes will be stored. It is not necessary to occupy a large area; you can get by with one shelf or even a hook (depending on your needs).

A garage is a place where hazardous and flammable substances are stored. These include oil, gasoline, solvents, paints, and polishes. For them, it is necessary to provide a separate cabinet, hang a fire extinguisher and install a sand tank.

To protect against contamination during storage of wheels mounted on tire brackets, it is worth purchasing large bags or specialized covers to prevent dust from entering.

Brackets and shelves for wheels in the garage: design features

The most bulky spare parts of a vehicle include sets of tires, which can be winter or summer. When winter tires are used, summer tires are usually stored in the garage, and vice versa. Therefore, you should organize tire storage shelves or brackets.

The design of the bracket is as follows:

Two triangular frames made from corners. Between these frames, jumpers made of any durable metal are installed.
The triangular parts of the structure are fixed on the wall in a pre-selected location. The wheels should be installed perpendicular to the supporting element of the stand. In this case, the tires should fall slightly between the jumpers, thus being fixed on the shelf due to their own weight.

Helpful advice! It is recommended to place shelves for wheels in the garage with your own hands as close to the ceiling as possible at the optimal height. Thanks to this, car tires will not take up useful space in the garage.

For compact storage of wheels, a whole rack in the form of four wide shelves can be used. It is suitable for placing wheels with discs, which can be placed one above the other in a horizontal position. The structure can be made angular and raised onto the wall.

wooden beam;
boards;
chipboard sheets.

Installing tire racks is the most efficient way to store wheels. Greater savings in free space can be achieved by hanging rubber from the ceiling base along the garage wall. This option is possible if the room has a large height and reinforced concrete floors in the form of slabs on the ceiling. They will be used as a basis for screwing in dowels.

Tool storage: interesting ideas for a DIY garage

To organize a convenient area for placing things, you can make your own homemade and very spacious rack or shelves. Of course, you can find hundreds of ready-made models in stores, however, making a shelf in the garage with your own hands is much cheaper than purchasing a similar product on the market.

The same problem applies to shelving. By taking on the task of making your own tool storage space, you can not only organize a convenient and practical rack, but also fit it harmoniously into the garage space.

Helpful advice! The minimum load that the structure must withstand is 150 kg or more. In this case, the maximum load limit per section is 500 kg.

Rules for the manufacture of wood products:

It is better to use hardwood, for example, beech, oak, hornbeam.
Before assembly, it is necessary to treat the wood with antiseptic agents.
The frame parts must be carefully polished to ensure safe operation of the rack.
To make shelves, it is recommended to use chipboard or plywood sheets, OSB. DVL slabs with a thickness of at least 4 mm are also suitable.

The thickness of the material is determined by the loads that will subsequently act on the rack.

Recommendations for making tool shelves in the garage with your own hands

Shelves are installed in cases where the garage does not allow for a shelving unit. It is better if there are several designs.

Scheme for creating shelves for tools:

Plan the placement of shelves, determine their size and mark them.
Prepare material in the form of boards and fasteners.
Using a hammer drill, make holes in the wall and install dowels with hooks in them, which will provide enhanced fixation.
Attach hangers equipped with eyelets to the boards. For metal hangers, it is recommended to use self-tapping screws or regular nails.
Fix finished products using a building level, otherwise the tool may fall from the shelves, which makes operation unsafe.

Helpful advice! When making shelves, it is better to give preference to several short structures, since one long product can break under the weight of the tool.

At the final stage, you can apply decorative finishing to the products (paint or special film).

Technology for creating a tool rack in the garage

To create a rack with your own hands, you will need boards 9 and 19 cm wide. The size of the structure can be adjusted.

Step-by-step technology:

An element 9 cm wide is cut into several pieces 18 cm, 27.5 cm and 30 cm long. The resulting parts will be spacers.
The board, the width of which is 19 cm, should be cut into pieces 36 cm long. Shelves will be made from these parts.
On the board that will become the base of the product, it is necessary to apply markings in those places where there will be spacers. It is recommended to indent 2.5 cm on each side.
The top spacer is glued, then the top shelf, which already has a spacer, is nailed to it. The remaining parts are mounted in the same way. Installation of the lower strut is carried out at the end.
The structure should be turned over and the spacers should be screwed together with the base of the product.
The surface is thoroughly cleaned using sandpaper. After this, the product must be coated with two layers of oil-based varnish or another type of finishing.
The structure is fixed to the wall using anchor screws. Fixation should be done both under the top and bottom shelves.

Helpful advice! To strengthen the product, wood blocks should be installed between the sections. They will allow you to evenly distribute the load throughout the rack.

Organization of lighting and heating systems in the garage

To make the operation of the garage comfortable, the lighting, ventilation and heating systems in the room should be properly organized. Since cars are closely associated with the use of toxic and harmful substances, the problem of ventilation in confined spaces is particularly acute. For a garage, vents are suitable for brickwork. They are equipped with grilles.

Factors affecting lighting levels:

garage area, its height;
the number and nature of the placement of work areas (sizes of a workbench for a garage, inspection pit, number of machines);
type of decoration on the walls, its colors;
indicator of network power density per 1 m²;
type of garage lights.

To maintain the optimal temperature, various types of heating can be used:

gas;
based on waste oil;
air;
electric (infrared heater for the garage);
oven;
water;

There are many alternative ways to organize your own heating system.

Features of halogen, fluorescent and LED garage lights

The technical characteristics of halogen lamps are in many ways similar to incandescent lamps, but their bulb is filled with bromine vapor, so the products emit more light. The advantages of such lamps include a long service life - 4 thousand hours.

Helpful advice! Products must be placed in lampshades. It is also worth thinking about stabilization aimed at protecting against electrical surges. It is not recommended to touch such lamps with your hands (the shelf life will be reduced).

Fluorescent lamps are filled with inert gases inside. The inside of the flask is coated with a specialized composition that emits ultraviolet light under the influence of an arc-type discharge. Recommended models include IP-65 class products, protected from moisture and dust particles.

Installing LED garage lighting comes with the highest costs. However, they pay for themselves in 50 thousand working hours. In terms of efficiency, LEDs are 50% more profitable than fluorescent lamps. At the same time, they do not contain harmful components, and the light does not have an aggressive effect on the eyes, so there is no need to purchase additional lampshades.

Installing lighting in a garage: how to calculate

To calculate the power of conventional lamps, you can use the formula:

P = S x W/N.

Explanation of values:

P – total required power, W/m².
W – power of one lamp, W.
N – number of lamps (luminaires), pcs.
S – room area, m².

For halogen and LED lamps, the optimal indicator is 16-20 W/m². This value is suitable for rooms where the ceiling height is no more than 2.5 m. In garages with 3-meter ceilings, this figure should be multiplied by 1.5.

The calculation is influenced by the interior decoration of the walls of the room. In dark garages, the lighting should be brighter.

Light reflection level:

Room area, m²	Ceiling height, m	Wall color
Room area, m²	Ceiling height, m	Dark	Light
20	less than 3	0,6	0,75
50		0,75	0,9
100		0,85	1
20	3-5	0,4	0,55
50		0,6	0,75
100		0,75	0,9
50	5-7	0,4	0,55
100	5-7	0,6	0,75

To illuminate the inspection pit in the garage, it is recommended to use low-power lamps with halogen or LED lamps, since moisture accumulating in this place can cause an electric shock. The devices are mounted on the sides in pre-made recesses.

Helpful advice! To prevent an accidentally dropped tool from breaking the lamp, the design of the lamps can be made retractable. When the pit is not in use, the devices are securely hidden in the recesses.

Do-it-yourself autonomous lighting system in the garage

There are a number of principles on the basis of which an autonomous lighting system is implemented:

LED strips are mounted inside the lampshades (there are 300 diodes per element).
The switch is output strictly to the panel.
A suspended ceiling system is used for electrical wiring.
The wires are powered by a battery connected to the network via a charger.

A multi-level lighting system for a garage is considered the most optimal. It involves installing a large lamp in the middle of the room and installing small lamps in work areas.

Height calculation for a multi-level system:

Level	Height, m
1	ceiling base
2	1,8
3	0,75
4	0,4

The lamps are installed correctly if the machine does not cast a shadow on either side.

Which heater to choose for a garage

Heating of the garage is carried out using small portable devices that are able to warm up the room in a short time and subsequently maintain the optimal temperature.

Having thought about which heaters are best for a garage, many mistakenly believe that a homemade device can be made exclusively from expensive components and requires a significant investment of time. For this reason, garage owners refuse this idea.

In fact, to make a garage heater with your own hands, it is enough to limit yourself to budget materials, for example, thermal film. The scheme for creating such a device is very simple and involves the use of the following materials and tools:

a kit intended for assembling a heater;
wire equipped with a plug;
paper laminated plastic (area of one element 1 m²);
graphite powder;
epoxy adhesive composition.

Helpful advice! Be sure to have a multimeter with you. This tool is useless when assembling the device, but it will be needed to check for functionality.

Thermal, or - a common heating option in the garage

Recommendations for assembling a homemade garage heater

Step-by-step instructions on how to make a garage heater:

A mixture of glue and graphite powder is made. The more powder in the composition, the stronger the heating of the device will be. The average temperature ranges from 60-65°C.
Plastic sheets on the rough side are coated with a mixture of glue and graphite, which is applied in zigzag strokes, after which they are fastened with their faces and fixed with a frame made from wooden slats.
Terminals are attached to the graphite conductors and the structure is dried. Drying must be complete, otherwise moisture will damage the device.

After the heater has dried, the resistance should be checked. A garage heater is considered safe only after this check. Until this point, it is strictly forbidden to connect the device to the electrical network.

Safety restrictions:

It is not recommended to leave the device switched on unattended or near children.
It is prohibited to use equipment that can cause a fire.
Do not place flammable substances or materials near the device.

Making useful gadgets for your garage with your own hands

To carry out repair and service work, you will need to build an inspection hole in the garage with your own hands, the dimensions of which will correspond to the dimensions of the car, as well as a workbench for convenient work, plus equip the room with machines.

The basic set of tools and materials for creating a homemade garage workbench includes:

boards and wooden blocks;
fasteners and ties;
plane and other woodworking tools;
varnishing and carpentry adhesives;
sandpaper and drying oil.

An example of placing useful devices in the garage: 1 - with hand tools, 2 - shelving and cabinets, 3 - a table for various repair work, 4 - a shelf for storing tires, 5 - an inspection hole

Technology for making a workbench in the garage with your own hands: photos, drawings

The workbench consists of a table top and a base, as well as several clamping devices. The height of the workbench in the garage should be selected taking into account your own height. You can take as a guide the height of the kitchen table in the house, at which it is convenient to work. Be sure to make drawings to create.

Helpful advice! Ready-made drawings of a workbench for a garage, which can be found on the Internet, are suitable as a basis for making your own structure. If desired, you can customize it to suit your needs.

Garage arrangement: how to make a workbench indoors:

Work stage	Details, size in cm	Mounting type
Assembling the tabletop	20 boards (5x10x200) with grooves 2.5x2.5 in the 5th and 16th element (step 25)	Adhesive composition metal ties
Drying	-	-
Making legs (4 pcs.)	Block (10x10x80) with grooves for brackets on the front supports	Brackets
Assembling the base of the underframe	Frames (2 pcs.) made of boards (5x10)	Tenon connection to a depth of 2.5 cm and bolts
Fixing the side and rear support walls	Chipboard boards (thickness 10 mm)	Screws
Fixing the tabletop to the upper frame	-	Bolts

Final processing involves impregnating the finished product with drying oil and opening it with varnish.

Recommendations for creating a viewing hole in the garage with your own hands

There are no specific sizes for a garage inspection pit. The dimensions of the car are taken as the basis.

How to make an inspection hole in a garage with optimal parameters:

The width is selected so that there is enough space inside to work. The size is limited by the distance at which the car's wheels are seated. Each wheel needs a small area to maneuver. The average pit width is 0.8 m.
The length of the pit is limited by the length of the machine. 1 m should be added to this indicator.
The height of the garage owner is used to calculate the depth. Another 10-15 cm is added to it.

How to properly make a viewing hole in a garage using different materials:

Material	Wall thickness, cm
Ceramic brick	12-25
Concrete	15
	20

The pit is dug taking into account the optimal width of the pit, the material chosen for the walls, as well as the thickness of the waterproofing layer. Stages of creating a pit:

marking;
construction of a pit;
arrangement of the pit;
construction of walls;
lighting gasket.

For waterproofing walls, specialized hydrophobic impregnation is used.

Helpful advice! Using formwork, you can make reinforced recesses in the walls of the pit to accommodate tools and lighting fixtures.

Making a garage press with your own hands

To create a press, a frame measuring 178x80 cm should be made from 4 pieces of metal pipes. These elements are connected by welding. It is recommended to be guided in your work by drawings, selected or compiled in advance. After this you need to install:

retainer;
removable stop;
bottle jack (hydraulic).

You can use video materials to review the detailed technology for creating useful devices for the garage with your own hands. Such visual recommendations help you navigate the dimensions, master step-by-step instructions, and imagine what the finished structure should look like.

Manufacturing diagram: 1 - upper power platform, 2 - nuts, 3 - lower platform, 4 - studs with a diameter of 30 mm, 5 - lower thread of the studs, 6 - bottle-type hydraulic jack; 7 - base 20 mm thick

You can do it yourself. The list of useful devices does not end there. It can always be supplemented with any interesting ideas. The main thing is that the garage fully meets personal requirements in terms of comfort and convenience.

A garage is a second home for car enthusiasts. This building serves not only to shelter the car in bad weather, but also as a place to store all kinds of tools; it is often a “mini-workshop” for the owner, where almost any repair can be done. Each owner arranges his garage to suit himself. Some people do not take the equipment of the premises very seriously, and it begins to cause more problems than benefits. But still, most car enthusiasts try to adhere to certain requirements that are important to fulfill for more convenient maintenance of their car. So, arranging a garage with your own hands requires meeting certain requirements.

Primary requirements

Arranging a space for a garage means that it will be warm and dry enough.

Your car should not freeze even in very severe frosts. If possible, you can provide a system for quickly warming up the garage.

It is very important to reliably protect the premises from unauthorized entry. When setting up your garage, remember that access to tools or equipment that will be located in the garage should be as convenient and simple as possible. Therefore, it is better to think in advance about the location of storage areas.

In general, these are only the very minimum requirements that it is advisable to take into account for your own comfort. You can also, if you wish, supplement and equip your garage with additional means for repairing and servicing your car. A workbench with tools and an inspection pit can be an excellent addition to the equipment of the room.

How to install racks and shelves

For the most comfortable arrangement of a garage, quite a lot of space is required, and this is often a problem. Storage of work tools and equipment also takes up quite a lot of space. Therefore, when arranging your garage yourself, try to accommodate as much space as possible for shelves or cabinets, but so that they do not interfere with free movement around the room. Shelves can be hung anywhere where you won’t catch or hit them, above tables, windows, shelving, and so on.

The distance to the car when hanging shelves on each side should be at least 1 meter.

Quite often it is convenient to equip the wall that is furthest from the gate for a variety of shelves and equipment. This is where the main working tools, compressor, workbench, etc. are located. Everything is at hand and does not interfere with moving around the room.

Plenty of shelving in the garage is a big plus, but it's also worth considering a small closet to hang work clothes and put away some rags.

How to properly arrange a viewing hole

The question of the presence or absence of an inspection hole is quite individual. First, you need to decide how high the need for arranging such a pit is. There is no point in equipping it if you often use the overpass on the street.

If you decide that you need such a pit, then you must take into account that the walls and bottom must be concrete. The edges of the pit must be reinforced with iron corners. It is also worth considering what and how you will cover the inspection hole when not in use.

A drainage hole is needed in the corner of the pit; all the water that accidentally falls down will be collected in it. The hole must be made of such a size that it is convenient to scoop out the accumulated water. To avoid accidentally stepping into a hole while repairing a car, it must be covered with a grill.

In the pit you can place small equipment that may be useful for repairs; you can prudently make niches in the walls so that it is convenient to put the tools you are using. Also take care of lighting the inspection hole, install a lamp or arrange a place for a portable lamp.

Necessary equipment

For a routine wheel change or disc replacement, or carrying out the most ordinary work under the hood of a car, a standard set of tools and a jack are sufficient. But to perform more complex work, special equipment is needed.

Crafting table

To make a workbench, it is best to use wood and metal. It is best to cover the working area with a piece of metal, protecting the wood from rapid wear. It is better to make a workbench in two or three levels in order to arrange as many necessary things as possible.

For ordinary body repairs, you will only need a welding machine with either tungsten electrodes, which are in a protective gas environment, or a carbon dioxide machine, which welds metal with wire.

Such a device is used to purify the air from vapors, drops of oil, water and other small particles that may be present in it. This is a very convenient device used when painting a car, and helps to distribute the paint evenly over the metal.

Washing

Of course, we are not talking about professional washing. And just about one that everyone can equip in their garage. To do this, you will simply need to connect a hose or pipe to supply water to the garage and drain it into the sewer. However, remember that electrical wiring and lighting will need more careful protection.

High-quality ventilation and lighting

It is very important to create high-quality ventilation in the garage; it will not only rid the room of unpleasant and harmful odors, but also protect it from the formation of dampness and excessive dust.

Ventilation holes are usually made on both sides of the gate at a low height and covered with grilles. The same holes are made on the opposite wall, but already under the ceiling.

Of course, the best lighting is natural, so if possible, you should consider having a window. If this is not possible, then make several lighting zones: above the work area, general and portable, which can be used to illuminate the most necessary things.

Video

An example of arranging a garage inside can be seen below:

Photo

Also, to equip your garage, you will need to buy metal cabinets for tools, shelving, workbenches and other garage equipment that will fit into the interior of the garage.

By on home garden Many car owners use their garage as a workshop, gradually filling it with practical devices that make car repair and maintenance easier. Many of them can be made independently using the recommendations presented in this article.

Many garage workshop tools can be...

Homemade garage tools: for storing tools in the garage. Homemade gadgets for the home workshop

By on house garden

Many car owners use their garage as a workshop, gradually filling it with practical devices that make car repair and maintenance easier. Many of them can be made independently using the recommendations presented in this article.

Video of homemade machines and devices for the home workshop

Many accessories for a garage workshop can be made independently; the video below demonstrates some of them.

Garage homemade products are devices that make garage life much easier; in addition, they work no worse than factory machines. By equipping your workshop with such devices, you can independently produce the necessary parts for your car, as well as various crafts for your home or garden.

Video of homemade tools and accessories for the garage

It is difficult to predict in advance what devices may be needed when repairing a car, however, there are some homemade products, some of which are used most often. Some of them can be seen in the video below.

Drawings of homemade devices

Pipe bender for profile pipe

A pipe bender is a useful household device that allows you to bend a metal or polymer pipe to a certain degree. Bent pipes are often used in the construction of greenhouses and greenhouses, installation of heating and other needs. Using the presented drawing, you can make a manual pipe bender yourself.

Small homemade vise

A vice is a practical device used when performing plumbing work. With its help, it is possible to reliably fix a part requiring metalworking in a certain position.

This device consists of several parts:

base plate;
2nd lips – movable and non-movable;
lever;
chassis screw.

Using a small-sized bench vice, the drawing of which is presented above, it is convenient to sharpen and otherwise process small parts.

Wood CNC Router

Having a CNC milling machine in your home workshop allows you to perform a whole range of wood machining work.

A homemade milling machine consists of several components and parts:

bed;
calipers designed to move cutters;
caliper guides;
spindle with installed cutter;
microcontroller or switching board with microcircuits that provide automation of the machine;
electric motor with power supply;
drivers responsible for transmitting commands from the controller to the electric motor;
a vacuum cleaner for collecting sawdust generated as a result of the operation of the machine.

A DIY CNC milling machine allows you to perform engraving and milling work.

Homemade tools for car repairs

A windshield wiper arm remover is a special tool that facilitates the process of removing wiper arms. You can make it yourself from a piece of reinforcement, a six-channel channel and a ten-bolt. To do this, use a drilling machine to make 14 holes and weld 2 nuts on both sides of the hole and a handle from the fittings, screw the bolt into the workpiece and, putting on heat shrink, screw in the threaded rivet. The tool is ready.

Another version of the device for shooting windshield wiper arms is shown in the photo below.

Another useful homemade device with which you can manually re-align your wheels yourself. Another version of this device can be seen in the photo below.

When carrying out major car repairs, you usually cannot do without a lift. A device made in a factory is not cheap, and is not needed very often, so it can easily be replaced with a device made at home.

Homemade machines and devices for the garage

By making devices for mounting and balancing tires, you can carry out this work yourself, significantly saving money on car maintenance. In addition, such devices will come to the rescue if it is not possible to come to a specialized tire shop.

In your garage workshop, you can equip a universal tire changing machine using available materials - metal pipes and a hub.

When performing various crafts for the home, it often becomes necessary to drill a straight hole. This is difficult to do with a regular drill, but if you make a stand for the drill, like the one shown in the photo, then drilling without distortions will be much easier. This design can be made from various materials. For example:

made of metal;

made of wood.

Using the diagram presented below, you can make your own drilling machine from a drill.

Using a homemade press will allow you to produce products using the pressing method in a garage workshop. A similar device can be made from a hydraulic jack fixed to the top of the frame, which in turn is welded from scrap materials. The pressure in this case is directed downward.

Another version of a homemade press, the design of which involves attaching a jack at the base of the bed. In this case, the pressure process is carried out upward.

Using a homemade press, you can straighten, bend sheets of metal, compress cardboard, and fasten individual elements. The video below demonstrates how to make such a necessary device yourself.

Tool storage devices in the garage

Having order is the key to comfortable use of workplaces in the garage. Special organizers are designed to ensure this order in the workplace, allowing you to conveniently store and easily find the necessary tools. You can make such devices yourself, using available tools.

A simple and affordable way to store hand tools is a wall organizer made from tin cans attached to a sheet of plywood. Additionally, you can nail several hooks or nails to it to conveniently hang measuring and electrical tools. In the absence of tin cans, PVC pipes of various diameters can be used as holders, cut into pieces and screwed to a sheet of plywood or chipboard.

It’s even easier to make a special device for storing screwdrivers. To do this, you need to take a wooden block and drill holes of the required size in it. Mount the finished holder on the wall. On the same holder you can organize a storage system for chisels and chisels. It is enough to cut out special holes in a wooden blank. In the same way, you can make a holder for power tools by cutting out the corresponding holes in a wooden shelf.

An interesting way to store tools is shown in the photo above. Its principle is based on the use of magnetic tapes attached to metal strips. Using such a system, it is convenient to store drills, keys and other metal tools.

Convenient and practical organizers for storing screws, bolts, nails and other small items can be made with your own hands from transparent plastic jars with lids. To prevent them from taking up space, you should attach them by the cover from below to the shelf. This and other ways to store tools allow you to efficiently use space in the garage and have everything you need at hand.

The video below demonstrates how to set up a simple and convenient tool storage system in your workshop or garage.

Homemade woodworking tools for the home workshop

Homemade milling machine

Homemade milling machines can perform one or more operations. Preference, of course, is given to multifunctional devices that save space in the garage workshop. With their help you can:

Make indentations of a certain shape;

Drill holes

Make grooves;

Process workpieces.

The simplest milling machine can be made on the basis of a drill. To do this, it is fixed to a steel profile or to a plywood body, and a rotating clamp is placed opposite it. Parts are processed using special cutters held by hand.

Homemade lathe

Creating a lathe with your own hands allows you to make dishes, interior decor and furniture from wooden blanks. Such a device will become an affordable alternative to industrial production and will help realize your creative potential. A homemade lathe can be made from individual components and parts:

an electric motor used as an electric drive for the machine;
a headstock, which can serve as an electric sharpener;
tailstock made from a drill;
stop for cutters;
transverse guides;
a frame made of metal profiles or beams.

The headstock and tailstock of a lathe are the main working elements, between which a wooden workpiece is placed. The rotating movement from the electric motor is transmitted to the workpiece through the front headstock, while the rear headstock remains static, responsible for holding the workpiece. If you equip a homemade lathe with additional devices - a baluster, a trident, a copier and others, then its functionality will increase significantly.

The video below demonstrates how to make a lathe with your own hands.

Homemade drilling machine

If it is necessary to drill precise holes in metal, plastic or wooden parts, experienced craftsmen recommend using a drilling machine. Unlike a drill, which vibrates strongly during operation, this device provides high-quality results, regardless of the material and thickness of the workpiece. You can make a simple drilling machine yourself by using the same home drill, but installing it in a vertical position on a frame made of furniture board and attaching it to a metal stand. If necessary, such a machine can be equipped with an asynchronous motor.

As a rule, home craftsmen do not stop at making the machines themselves. Very often they work to improve existing equipment.

The video below demonstrates useful accessories for a lathe that expand its functionality.

Homemade metal tools for the home workshop

These do-it-yourself devices for the home workshop are designed to facilitate the metalworking process. They are usually made from scrap materials and tools.

Among the most popular devices are:

pipe benders;
press;
vice;
milling, metalworking, turning, drilling and thicknessing machines;
devices for sharpening drills, knives and other tools.

With their help, a home craftsman can make practical devices for a summer house, garage, and also equip a comfortable home. Examples of useful machines and devices in the household can be seen in the photo below.

Homemade circular saw

Homemade thickness planer

Homemade metal cutting machine

The video demonstrates how to make some useful household devices.

Taking into account the presented recommendations and drawings, any home craftsman will be able to make useful devices for the garage and machines for his workshop, arrange an ergonomic space in it, and realize his creative abilities.

DIY garage accessories: all the most useful things

Tags: Garage, DIY

We will send the material to you by e-mail

D For the rational use of space, communications and do-it-yourself garage accessories from scrap materials are used. It is necessary to use walls and an underground level in the process, place machines inside the room, and organize normal lighting.

Homemade gadgets for the garage

For comfortable operation of a room intended for car storage, you should adhere to certain recommendations:

the tool must be as accessible as possible;
storage spaces equipped with shelves/racks are much more convenient;
workbenches, inspection pits, homemade machines and do-it-yourself garage accessories expand the capabilities of the car owner;
the cellar allows you to save space;
The productivity of work and minor repairs depends on the quality of lighting.

Depending on the dimensions of the building, the area occupied by equipment, fixtures, and communications should not be more than 10–20% of the size of the garage floor.

Storage areas, racks, workbenches

It is more convenient to store wheels on brackets of the following design:

two triangular frames from a corner, connected by jumpers from any rolled metal;
the triangles are attached to the wall, the wheels are installed perpendicular to the supporting structure, falling slightly between the jumpers.

This is the most economical option for storing tires in the off-season. The most popular among car enthusiasts are straight and corner workbenches. The lower space is usually filled with shelves or drawers; sharpening machines and a vice are located on the tabletop.

It’s easier to build a wooden workbench yourself, but it has a shorter lifespan than its rolled metal counterpart, which needs to be welded. If corners for shelves are not built into the load-bearing walls during construction, it is easier to make racks from rolled metal or lumber.

Original hanging shelves are suitable for storing long items

The design and arrangement of shelving inside each garage is too individual to follow general recommendations.

Inspection pit and cellar

A necessary accessory for a DIY garage is an inspection hole. Moreover, the owner does not have to carry out all the repairs himself. Underground communications can be used in the following cases:

inspection of the chassis, steering, and brake systems before a long trip;
oil change, which allows you to save money and does not take much time;
minor repairs that can be carried out by the owner's qualifications.

It is more convenient to make the entrance to the cellar from a hole, as this will allow you to concrete several steps instead of using an extension ladder.

The main nuances of these designs are:

swelling of clay soils is harmful to underground structures;
therefore, all elements of the pit and cellar are insulated from the outside with expanded polystyrene;
sand or crushed stone is used in the underlying layer before concreting and backfilling of the pit sinuses;
Drains are laid along the perimeter of underground structures at the base level to collect and drain water.

The width of the pit should allow the driver to enter it without lighting.

Lighting and ventilation

In garages, parallel circuits of lighting fixtures are more often used. One lamp allows you to use a specific area, several devices are turned on during a major renovation or a visit to the cellar. Minimum energy consumption is ensured by LED lamps. Daylighting devices have a greater resource.

Cars use toxic, harmful fuels and lubricants, so do-it-yourself garage ventilation devices that allow you to create air exchange are becoming relevant. The influx is organized from below:

garage - vents in the masonry, protected by bars;
cellar - pipe from the garage or from the street.

The hood is mounted under the ceiling of the cellar, the roof of the garage, or has the form of vents in the main walls at the highest points.

Ventilation in the garage with your own hands. From this publication you will learn why garage ventilation is so important, what air exchange schemes exist, and installation nuances.