So, you have extra pallets at your dacha. Perhaps, several years ago, it was on these pallets that bricks were brought to you for the construction of your new house, and since then they have been wandering aimlessly from one corner of the yard to another, getting in your way and getting under your feet. Or perhaps you just bought a summer cottage and found several unnecessary pallets in the barn left by the previous owners. One way or another, you wondered, “What can be made from pallets?” Of course, you can simply break them down into firewood, but we want to offer you some extraordinary ideas, armed with which you can make beautiful and practical things from pallets for your garden that will delight you and surprise your guests.
Furniture made from pallets for the garden
Old pallets can be an excellent material for making original garden furniture. The main thing is to follow a few simple rules.
Firstly, it is important to carefully treat the external surfaces sandpaper to protect yourself and your loved ones from splinters. Of course, it is better and faster to do this with a grinder, but if you don’t have one, this work can be done manually.
And secondly, you need to be careful when choosing finishing materials. Stains, varnishes and paints can give your new furniture a fantastic look, but not all of them are equally safe for humans. Carefully read the instructions for use on the package, and if in doubt, try to get qualified advice before purchasing.
You shouldn’t try something complicated right away, especially if you’re trying your hand at it for the first time. carpentry. To start, choose a simpler project. A small victory is better than a big disappointment. If you have never tried to do anything like this before, start with, for example, a table like this. It is simple, practical, and most importantly, it will definitely find a place in your dacha. You can take on more complex items once you feel confident in your abilities.
If you really have a lot of pallets, they can make a great deck deck. This type of flooring is much less expensive than traditional plank flooring and is easy to install.
Furniture made from pallets can find its place not only in the garden at the dacha. It will also fit perfectly into the interior of your living room, hallway, kitchen or bedroom, such as this TV stand.
An original shelf for things will decorate your workspace and help you find a place for every little thing.
And an unusual hanger will definitely attract the attention of your friends when they decide to visit you again.
Small coffee table from a pallet will refresh the room and become a unique item in your interior, because you can’t buy something like this in a store.
In addition, the use of furniture from natural materials will bring you a lot of pleasure and positive emotions.
Another advantage of such furniture is its absolute environmental friendliness.
Flower beds and decor from pallets for the garden
You can also make from pallets a large number of various flower beds, flower pots, stands and other decorative garden elements.
Using paints, varnishes and your imagination, you can give each item its own unique character.
From a pallet you can make beautiful shelf for flower pots.
Or a device for storing garden tools.
If you have children, you can make a sandbox for them.
Or an entire playground.
Or maybe you have been dreaming of a swing for a long time?
Use your imagination and combine ideas. This way you can create something of your own, absolutely unique and reflecting your personality.
From old pallets you can make many interesting, convenient and beautiful things for the garden, with the help of which you can completely transform your site and add zest to the interior of your home. We hope our selection of unique items made from pallets will inspire you to find your own solutions. Don’t be afraid to experiment, the main thing here is a bold idea and a flight of imagination.
Treat yourself and surprise your friends original things, because looking at your new table or a sofa, they just won't believe that you made it yourself from old unwanted pallets that have been lying around in your garage for years.
Pallets are special wooden structures designed for transporting various goods. They are environmentally friendly, reliable and durable, which is why they are often used to create numerous interior items. And making furniture from pallets with your own hands step by step photo is considered a simple task. With the help of these elements, it is possible to embody original and unique ideas, so designs will be obtained that fit perfectly into different styles interior, as well as having a beautiful appearance.
Making furniture from wooden pallets requires preliminary preparation the pallets themselves. They usually weigh up to 20 kg, but the dimensions can be standard or European.
You can purchase inexpensive products at construction sites. Furniture made from wooden pallets is quite practical.
In the process of selecting pallets, the following factors are taken into account:
- before purchasing, all elements are carefully inspected, since it is important to make sure that their surfaces are completely free of any cracks, fasteners or other elements that impair the process of using them to create furniture;
- the length and other parameters of the pallets must be suitable for the conditions in which the structures made will be used;
- If pallets are purchased that were previously used for any purpose, then they must be thoroughly washed and cleaned of dirt, and wet cleaning must not cause any harm to them;
- in order to obtain high-quality products from pallets, they should be sanded well, which will completely remove various roughnesses, irregularities and burrs from them, and for this, sandpaper or a grinding machine is used;
- If you plan to install furniture from a Euro pallet on the street or on a balcony, then it must be treated with a special moisture-resistant primer so that it has excellent resistance to moisture.
What kind of furniture can be made
DIY furniture made from pallets, created step by step, can be presented in numerous forms. It can be used outdoors or indoors. The most popular designs are:
- sofas or armchairs, as well as other products intended for comfortable rest, and they can be hard or equipped with a soft spot;
- tables, both dining and coffee tables, with in different forms, height and other parameters;
- shelves or racks, as well as full-fledged cabinets designed for storing a variety of small items;
- decorative elements that do not have any functionality, therefore they usually act exclusively as decoration of the territory or room.
Thus, wooden pallets can be used to create a variety of various items. They have many differences, but in any case they are simple to create, so all actions can be easily done with your own hands.
Tools and materials
DIY furniture made from pallets step by step in the photo is presented in many types. If you plan to do it yourself, then a lot of attention is paid to preparing tools and materials in advance. During the work process you will definitely need:
- a saw or grinder, and these tools are necessary in order to evenly and efficiently cut wooden boards that have a fairly significant thickness;
- hacksaw, hammer and jigsaw;
- for grinding wooden elements use either sandpaper or a grinding machine;
- standard tools - a screwdriver or screwdriver, designed for using various fasteners;
- the fasteners themselves, which include corners or nails, self-tapping screws or screws;
- special means for processing wooden products, and these include primer, varnish or paint, and you will certainly purchase brushes, rollers and other tools for covering pallets with different protective compounds;
- materials for creating upholstery and stuffing if you plan to make upholstered furniture.
If different drawers or sets are made, then for their effective and comfortable use, you will certainly buy convenient and attractive fittings.
Manufacturing stages
How to make furniture from pallets with your own hands? This procedure completely depends on what kind of structure is being created. Before starting the formation of any object, it is necessary to make drawings according to which the process will be carried out. Schemes can be made independently if you have the appropriate skills, and you can also use special computer programs or even contact the relevant organizations.
Sofa
Most often, a comfortable and roomy sofa is made from pallets. It can have different shapes and sizes. Before the actual process of its creation, you should decide on its dimensions, configuration, the presence of additional elements and other basic issues. It is advisable to make it soft, so the material for padding and upholstery is selected.
After solving numerous preliminary issues, the actual process of assembling the structure begins:
- high-quality pallets are purchased in optimal quantities, and the presence of any cracks or mold is not allowed on them;
- the pallets are cut in accordance with the diagram, and a hacksaw is usually used for this, and after this work the back, seat and legs should be obtained;
- all parts made are certainly well polished, which allows you to get a frame without various protruding elements and burrs, and for this it is best to use high-quality grinder;
- after high-quality sanding is completed, all parts are coated with a suitable varnish or special paints intended for wood, and in addition to them, it is allowed to use other compounds that protect the material from rotting, exposure to insects and other factors;
- the products are thoroughly dried;
- direct assembly begins, for which individual elements are fixed to each other based on a pre-made diagram, for which self-tapping screws are used;
- The resulting structure is decorated, for which a mattress or pillows are laid, and the sofa can be covered with various other fabrics.
Particular care should be taken when working with a grinding machine and various paint and varnish materials, since the processes must be carried out only in protective clothing, as well as with safety glasses and a respirator.
Thus, making a sofa using pallets is quite simple. This process is done by hand without the use of specific tools. If a structure is formed that is used on outdoors, then all elements are certainly treated with special moisture-repellent agents that increase their service life and protect them from the effects of water.
A master class on creating a chair is considered even simpler. The resulting design will look good on any site, and with a competent approach to creation it will be of high quality and convenient. The whole process is divided into stages:
- the wooden pallet is sawn, and 4 crossbars should remain on one side and 5 on the other;
- the long part will act as a seat, and the short part will be used to create a backrest;
- the backrest is fixed in a vertical position between the seat crossbars located along its edges;
- for comfortable sitting, it is recommended to tilt it slightly;
- another pallet is being disassembled, from which it is necessary to make legs and armrests that ensure the comfort and safety of using the chair;
- it is important to securely fix these additional elements so that they can withstand different high loads;
- the resulting structure is covered with various pillows, upholstered with stuffed materials and upholstered, and also decorated with other different ways allowing you to get a truly beautiful product.
Thus, making furniture from pallets is quite easy. It can have different parameters, so you can get a design that fits perfectly into a particular interior style.
If you pay enough attention to the proper decoration of such a chair, it will look great even in an apartment, and you won’t have to spend a lot of money on its creation.
Tools
Sawing pallets
Preparation of material
Pallets need to be sanded
Finished item
Assembly of parts
Fastening elements
The backrest is attached to the seat
Bench
Occurs various production pallet furniture. Popular products formed using pallets are various benches designed for use by several people at once. They can have different sizes and shapes, so it is possible to get a structure that looks good in a certain area.
Every person who has made benches from pallets knows that this process does not require specific skills, so it is enough to perform only certain simple steps in the correct sequence:
- the pallets are sawn into two parts to create a bench that is not too wide, and the correct ratio of parts is determined by future users independently;
- the wide part will act as a seat, and the narrower part will be used to create a backrest;
- these two parts are connected at the desired angle, for which angles and screws are used, for which suitable holes are first made in the workpieces in the required areas;
- the screws are tightened tightly and reliably, which will ensure a long service life of the entire bench;
- if a long structure is required, then another such large blank is made;
- preparation of the legs begins, for which elements of the required size and design are cut out of the bars;
- it is advisable not to make the legs excessively high, but they must be wide, which will have a positive effect on the reliability of using the bench;
- The legs are fixed to the bottom of the seat, for which the use of metal corners is considered optimal;
- two large blanks are connected on the sides;
- After assembling the main structure, you can supplement it with various functional or decorative elements, which include soft spot, armrests, ottomans or other parts that increase the comfort and attractiveness of the bench;
- the finished product is coated with varnish or a special coloring composition.
Thus, it is quite easy to get a bench using pallets, so this procedure is often done on your own.
Sawing the pallet
We screw the legs with corners
Corners fit tightly
The backrest is secured with metal brackets
The surface is sanded
Primer
Surface painting
Rack
To others interesting solution The best way to use wooden pallets is to create a rack that has good capacity and functionality. With proper decoration, it can be used to store various items even in residential areas. You don’t have to spend a lot of money and effort to create it. If you are doing the work yourself for the first time, it is recommended to first watch the training video in order to take into account the many nuances of this process.
The whole procedure is divided into easy steps:
- pallets are freed from boards;
- the height of the created rack depends on the number of pallets used;
- boxes pre-made from plywood or other similar material are inserted into the empty spaces of the resulting structure;
- the resulting rack is painted or decorated in other ways suitable for the specific room where it is planned to be installed;
- To increase the stability of the rack, it is installed on level ground, and can also be reinforced with various elements.
It's quite easy to get high-quality, attractive and reliable shelving using wooden pallets.
Preparation of material
Pallet processing
We remove everything unnecessary
Assembly of elements
Finished product painting
Ready-made shoe rack
Table
Another interesting solution is to create a table from pallets. This process will require only one pallet. To create a structure, follow these steps:
- a pallet is used as the base of the table, and it is important to make one plane of this element perfectly flat, so there should not be any gaps or other problems on it;
- gray hair is cut out on the second side;
- on the upper plane, every three bars are connected by a board;
- the legs are prepared, for which wood blocks are used;
- they are certainly coated with a high-quality primer, after which they are painted with a special protective paint intended for wooden surfaces;
- The resulting table is decorated, and for this you can use different design ideas.
With a competent approach to this issue, a truly high-quality design with an excellent appearance is ensured.
Pallet selection
Details for the table
Preparing the base
Assembly of parts
Attaching the legs
Triangles for leg stability
Glass installation
Pallet table
Decorating ideas
Pallet structures can be decorated in a variety of ways. For this purpose, numerous design ideas. Most often used for these purposes:
- painting in different shades;
- use of upholstery and padding materials;
- creating all kinds of hangers, shelves, stands or other functional elements;
From disassembled wooden pallets you can assemble a variety of pieces of furniture as if from construction kit parts, using both ready-made panels and boards and beams separated from them. If you decide to try your hand at making furniture for the first time, first try assembling a coffee table from pallets with your own hands - photos and drawings of such a table are easy to find on the Internet.
Preparation and operating principles
Tools and consumables
You will need:
- drill, drills and abrasive brush attachment for polishing wood (or sandpaper); hammer, nail puller, brushes and roller for paint, varnish, primer;
- screwdriver and screws;
- primer, varnish or paint (acrylic, polyurethane);
- accessories (corners, clamps, wheels for a table, handles for drawers, etc.
To make the screws fit into the wood easier, lubricate them with laundry soap or any other soap. If the pallet table will be placed outside, before assembling wooden parts must be treated with a moisture-proofing compound.
Preparing materials
To make a table whose top is not the same size as the standard pallet size, disassemble the pallets using a hammer and a nail puller. Before disassembling, they need to be cleaned of dust and dirt (washed or wiped with a damp cloth and dried) and lightly polished. This can be done with sandpaper or using a drill attachment.
Attention! All parts of the pallets need to be cleaned, and only those areas that will come into contact with the body should be sanded. Don't forget to wear a mask and safety glasses!
Remove the nails, being careful not to break the boards, sort them by width and condition, especially if you used used pallets. It is enough to coat new pallets or their parts with a moisture-protective compound, while it would not hurt to treat used ones with an antiseptic primer. If products were transported on them (for example, vegetables or cereals in bags), organic particles trapped in the microcracks of the boards begin to decompose over time, and bad smell. Primer and varnish or paint are already covered finished goods when the glue holding the boards together dries.
Coffee table
Cleaned and painted or varnished (stained), the tray itself can serve as a low decorative coffee table. This piece of furniture will fit well into an “oriental” interior with sofa cushions on the floor and will appeal to people who like to drink coffee while sitting on a fluffy carpet. Well, if you want it to be the usual height, assemble it from two or three pallets stacked on top of each other.
To make a small table from pallets you need 2-3 pallets, one of which is disassembled into blanks. The boards from it are stuffed between the slats of the future table top to create a continuous sheet; The floor of the shelf and legs are used to make shields.
Finished large parts are sanded, treated with protective compounds and left to dry. After they have dried, the roughness remaining after the initial processing is rubbed with fine-grained sandpaper or sanded with a brush attachment for a drill.
Now you can assemble the structure:
- a shield assembled from boards is attached to the bottom of the pallet, which forms a shelf or niches for drawers. The shelves on top are left lattice or made solid.
- several layers of stain are applied to the table or primed and painted;
- at the corners of the bottom assembled table Bolt the four legs or furniture casters to the rollers.
In order for a coffee table made from pallets to stand level, mark in advance the places where the rollers will be: attach them to the tabletop and use a pencil to place marks in in the right places. Drill holes for screws using these marks.
Kitchen table
To make a dining table, you will need four meters of timber with a cross-section of 2 x 2 cm and several pallets: square, 1 x 1 m in size (for the tabletop), and standard - 1.2 x 1 m (for disassembling into parts).
From a standard pallet you will get eight boards for the table legs, the width of each of them is about 7 cm, and the length is 66 cm. From the timber, cut four 7 x 68 cm sections for the table frame and eight spacers 32 cm long (along the long edge). Cut the ends of the spacers at a 45 degree angle.
Now you can start assembling. If you like the natural texture of wood, sand the parts and coat them with clear or colored varnish before assembly. Step-by-step instructions:
- Put together a frame of four boards.
- Place two boards at 90 degree angles and connect them with metal squares or glue and screws. These will be the corner legs.
- Attach the legs to the frame, additionally connect the frame and legs with supports.
- Secure the square pallet to the frame with the base facing up and place a sheet of thick glass on it. Glass for the tabletop can be transparent or colored, it is glued transparent glue or drill a glass plate and fasten it to the frame with large bolts.
The tabletop can also be made from boards from a disassembled pallet, stuffing them with a solid canvas on top of the frame. For niches inside the table, drawers are made from boards or plywood - in them you will store cutlery, napkins and kitchen items. The limiter for the drawers is the middle part of the base of the pallet, and the “extra” openings are filled with wooden cubes cut from thick timber.
Desk
The simplest computer or desk is made from four pallets, two of which, placed vertically, serve as its side walls, with shelves for small items. If you place the side pallets with their bases facing outwards rather than inwards, small flowerpots with flowers can be placed on the shelves. The floral design harmonizes perfectly with the wood and will enliven any room.
The upper pallet is left unchanged, but its surface is made solid by filling the gaps between the slats with boards or timber and thoroughly polished. The lower part of the pallet becomes a shelf or niche for drawers. Unlike the dining table, in the writing table they are placed only on the wide side, making a delimiter inside the niche: two rows of wooden cubes with edges of 20 centimeters each. The same cubes are used to fill the openings on the sides. If you are not going to place the table close to the wall, equip drawers on both sides of the table.
Work or office option for an office
Another variant desk in eco-style - with a tabletop made of pallets, placed on metal or wooden legs. It doesn’t look as bulky as the previous option, and it can be easily complemented with a restored bedside table by decorating both pieces of furniture in the same style and connecting the bedside table with the table with a wooden panel. Two “lightweight” tables made of pallets, separated by a bedside table, will become a common workplace for brothers and sisters living in the same room.
Advice! In addition to the desk, you can make a wide stool from a pallet and place it on it. Attach furniture casters to the legs, and without a cushion it will serve as a small mobile table.
Baby changing table
One of the main requirements for furniture for children is the strength and reliability of the structure, so pallets are the best suited for its manufacture. Assembling a changing table from pallets with your own hands is not much more difficult than a coffee table.
It requires four to five “wooden trays”, one of which will be disassembled. Like the desk, the legs of the changing table are two vertically placed pallets, and the top is a solid board. The only difference is that the sides are padded around the perimeter of the tabletop so that the baby does not accidentally roll off it.
The internal projections of the side panels of the table serve as the basis for two lattice shelves. This will contain spare packs of diapers, a change of clothes for the baby, bedding, etc. If you need drawers for small items, use one or two pallets assembled together and cover the structure from below with a sheet of plywood.
You can use glass to level the surface of Euro pallets
You can also make a spacious cabinet table for a nursery from pallets. In this case, the shelves are made of solid panels, and thick beams are vertically stacked in the middle so that they form a wall connecting the tabletop and the shelf. Boxes made of plywood or boards are inserted into the niches. When the baby grows up, he will start storing toys in them.
“Live” wood or painting?
Tree - universal material, which goes with all the others natural materials. While maintaining its natural texture, furniture made from pallets can be complemented with textile accessories, glass table top; metal and forged parts; painting and wooden mosaic. However, we must remember that the type of wood processing depends not only on the artistic design, but also on the purpose of the piece of furniture:
- colorless varnish is necessary not only to highlight the structure of wood fibers, but also to protect the table from sauces, tea, and coffee spilled on it. Untreated wood absorbs liquids well, and over time the countertop will be difficult to clean.
- The table does not need to be painted or varnished. But if it will stand in the house, it needs to be impregnated with wood stain (except decorative function it also has disinfecting properties), and garden furniture is treated against pests and moisture.
Euro pallets - free material
Protective compounds are applied with a brush, roller or sprayed onto the surface to be treated with a spray gun in two or three layers. If you want to paint the table oil paint, it must first be primed with a special putty or covered with drying oil.
Depending on the accessories and the method of decorating the wood, a table made from pallets will decorate a country-style kitchen, fit right in, or fit well into today’s fashionable loft. And having learned how to make a table from pallets with your own hands and having practiced, you can continue updating your interior with unusual and beautiful pieces of furniture.
Handmade pieces of furniture and decor not only carry a piece of warmth and vital energy masters, but also capable of creating the interior of a room or furnishings landscape design yard is unique, interesting and non-trivial. With a small financial and time investment, you can get interior items, furniture and decor from simple wooden pallets, which are usually left over after construction work. Special stands for construction and finishing materials also called pallets. They are made from practically untreated, but very durable wooden boards, located not close to each other, but at some distance.
Instead of using used pallets to light a barbecue fire, try using them to create an original setting in your home or business. personal plot. Of course, you will have to spend time preparing the product for craftsmanship, cleaning, sanding and priming all surfaces, making necessary measurements, purchase accessories, possibly paint or varnish for opening. But it's obvious that financial expenses the necessary little things cannot be compared with the cost of similar pieces of furniture from stores. And the time and effort spent will more than pay off with the purchase of a new piece of furniture that keeps the warmth of your hands. We bring to your attention an impressive selection of photo examples of what pallets building materials can not only get a second life, but also become a highlight of the interior or landscape design.
Pallets for the manufacture of furniture and interior decoration items
Dining tables, coffee tables and stands
The most popular pieces of furniture, which are most often made from construction pallets– tables of various modifications. Their distribution is obvious - a low table can be made simply and quickly even by a master without much experience. In order to get a full-fledged piece of furniture, you need a minimum set of tools and furniture fittings.
You can simply sand your coffee table or stand without painting and thereby bring the warmth of wood tones into the interior. Varnishing will not only protect you and your household, but will also extend the life of a new piece of furniture, because there is always a risk of spilling something on the furniture.
Or you can paint the resulting product, use thick glass as an original tabletop and provide your table with wheels for mobility. Similar accessories are sold in all construction stores and are inexpensive.
The free space between two rows of pallets can be used as storage systems or equipped with drawers. Equipping them with original handles.
If you can easily make a coffee table out of pallets, then so can a writing or writing table. dinner table can be made quite quickly. To do this, we “extend” the legs by placing some of the pallets perpendicular to the tabletop, paint the product or varnish it. The resulting piece of furniture can be equipped with a glass tabletop, drawers or original blocks on the sides for storing books, papers or magazines.
A desk with drawers on metal legs, divided by a restored cabinet, can become a workplace or a creative area for two teenage children living in the same room.
A dining table made of wooden pallets, mounted on metal legs with wheels (they can be purchased at furniture fittings stores), on the one hand, is durable and reliable, and on the other hand, it is mobile and can easily organize a dining area together with chairs anywhere.
Beds
The entire bed frame can be made from pallets. You can make the base from one row of pallets (in this case you will get a bed in the style of Asian interiors, where all the furniture is very low) or put two levels on top of each other. You won’t have to worry about ventilation of such a bed base, but we don’t recommend jumping too much on the resulting frame.
Depending on the interior style of your bedroom and the chosen color palette, either the natural color of the wood may be suitable, or you may need to paint the frame.
Pallets can be used to decorate the head of the bed. For interior styles that use elements of styles such as loft, minimalism, country, industrial pop art or their varieties, such decor can be a godsend, the highlight of a modern bedroom.
Pallets for decorating the head of the bed can be positioned differently relative to the wall and sleeping place. In some cases, you can organize a narrow shelf so that you can put your phone or book.
For a minimalist bedroom setting, where the bed is not only the central piece of furniture, but often the only one, pallets are perfect as a material for making a frame.
Sofas and armchairs
If you can make a bed out of pallets, then making a sofa is quite possible. Obviously, such a piece of furniture will require the purchase of soft seats and backs. But you can use such a sofa even in rooms where there is a risk of the upholstery getting dirty, such as the kitchen or dining room, and you can simply wash the removable soft parts.
The height of the sofa in general and the backrest in particular, the presence of armrests is your decision. Considering the standard sizes of pallets, there are few options, but they exist.
Similar sofas with removable soft parts can be used for furnishing interior spaces, and install it outside.
You can leave the pallets in their original colors, treating them only with special protective varnishes. Or you can add color variety to the interior of the room and paint the resulting sofa frame in bright color, and maybe use contrasting combinations of two shades.
Made of wood construction pallets you can make a whole ensemble of sofas or use a corner modification to create a spacious piece of furniture. With soft padding and plenty of pillows, this sofa can be a great sitting area for your living room.
For a more ascetic setting, you can use a sofa made of pallets and without soft pads.
Using a similar scheme, you can construct a small chair. The space between the levels of the pallet can be used as a storage system - store magazines or books that are currently relevant to you.
Decorative elements
Using boards taken from old pallets, cleaning them from dirt, sanding them and sanding them, you can make not only pieces of furniture, but also decor for your home. Original elements interior design will not only add variety to a traditional stop, make the room more original, but can also become the focal point of the rooms in your home.
A small panel made of wooden blocks of different shapes and colors with open shelves can be not only wall decor, but also a storage system for small things that are important to keep “at hand”.
Just a few short boards, knocked together using low sides and a couple of handles on the sides - an original tray is ready, which you can use in situations where you need to bring something, for example, breakfast in bed.
You can make a resting place for your pet, the manufacturing principle is similar to the process of obtaining a sofa or armchair. The resulting place for a dog or cat can be equipped with a soft substrate, holes can be made for drinking bowls and bowls of food so that they are always stationary and water and food do not spill.
An original mirror frame, made up of wooden pieces of different colors and shapes, can be the highlight of your bathroom or toilet.
The use of pallets for arranging a yard or personal plot
If you are not yet ready to bring a product made from wooden pallets into your own home, try using building blocks for arranging the landscape of your summer cottage or the yard of a private house. Wooden boards from pallets can serve as the basis for creating a barbecue area. Don't forget to treat the surfaces with heat-resistant impregnations.
Pallets can make excellent, durable garden swings that can be used by both children and adults. The resulting product can be supplemented with soft seats or simply throw on a blanket for more comfortable placement.
On the same principle corner sofas, you can build seating areas under open air or on the terrace, veranda, under a canopy. By adding a low table-stand to the resulting furniture set, you will get a full-fledged relaxation area.
Small table and chairs for breakfast or dinner Zone for four – an excellent opportunity to have a meal on fresh air. What could be better for own yard or a summer cottage with a house?
The already familiar two-tier tables on wheels can also be used as an addition to garden furniture to organize an outdoor recreation area. Thanks to the wheels, the product is very mobile and you can easily hide it under a canopy if it starts to rain.
For wooden pallets limitless possibilities applications on summer cottage or in the courtyard of a private household. For example, such stands for flower pots and tubs can become a practical addition to the organization of landscape design of the local area.
Such flower stands can not only be placed on platforms, but also hung on a fence or any other vertical surface.
The small sofas and armchairs that you saw in the first section of the publication dedicated to interior design premises, can also be used as garden furniture. Of course, such furniture will fade in the sun over time and will have to be protected from moisture with special care, but such garden furniture will cost you much less. And many impregnations, varnishes and other sprays can help increase the service life of pallet products for outdoor use.
Wooden sunbeds for adoption sunbathing and tanning is another practical way to use construction pallets. You can complement them with soft substrates and place them near the pool or just in an open area in the yard or area.
Can be useful in any summer cottage or in the courtyard of a private house wooden bench, made from construction pallets.
Painted in a bright color and equipped with soft seats or cushions, such a bench can become a gathering place for household members or guests in your area.
From old pallets that could simply be used to kindle a bathhouse or become fuel for a fire, you can create an entire furniture composition that can complete the patio in your backyard or garden. Such a set is not only reliable, practical, affordable, but also looks very organic.
Https://www..jpg 400 640 Dix https://www..pngDix 2015-06-10 19:45:58 2018-11-30 11:20:37 100 ideas for creating furniture and decor items from pallets