How to make figures out of wheels. Crafts from tires: flower beds, flower beds, figures, garden furniture

It is now becoming fashionable to give a second life to used things or objects. Especially people who have country houses and summer cottages are fond of this.

Car tires are growing in popularity. Initially, they began to be used to decorate the garden in the form of flower beds. But it turns out that you can make very comfortable and functional furniture from car tires with your own hands.

Having shown your imagination, having a little patience and making a little effort, you can create a complete set of furniture from car tires with your own hands.

Consider some options for furniture that can be made.

Coffee table

A necessary thing in the interior is a coffee table. And if it is also made with your own hands and from such an unusual material, it gives it even more value.

To make this piece of furniture, you will need used car tires, a sheet of plywood or plexiglass, a drill, self-tapping screws, a glue gun, paint, or any other finishing accessories.

Decide on what your table will be, and get to work.

First of all, we thoroughly wash the tires and remove everything that interferes.
We fasten the tires together with a drill and self-tapping screws. Try to make it as strong as possible, because the service life of the table will depend on it.

Depending on the design of the table, you can paint it with paint, or wrap it with a natural cord or rope. Paint is best used from a spray can, it will lie more evenly.

If you use a tourniquet or rope, then use a glue gun to glue it to the tire, gradually braiding around the circumference.

From a sheet of plywood or plexiglass, make a countertop. If your countertop is made of plywood, then you need to cut a circle with a diameter slightly smaller than the diameter of the tire.

And if made of glass, then a larger diameter than the tire itself will look better. Carefully attach the table top to the rail base with glue. Decorate the countertop to your liking.

Attach the bottom of the table by cutting a circle out of plywood and attaching it to the rails with self-tapping screws. Optionally, you can make wheels or legs.

And now your exclusive coffee table is ready!

Included with the table, you can make cute soft ottomans from car tires.

Tire ottomans for a group of friends

Such padded stools will always come in handy in the country. When inviting your friends to barbecue, you can be sure that they will be accommodated comfortably.

To make soft ottomans, you will need used tires, thick foam rubber, plywood sheets and the fabric that you have chosen for decoration. Progress:

We wash and carefully process tires.

We fasten the tires together for higher ottomans, using a drill and fasteners.

We cut out the bottom and seat for the ottoman from the plywood sheet. And also from foam rubber we cut out a circle equal to the diameter of the tire. We fasten plywood with self-tapping screws, and foam rubber to plywood with glue.

We cover the ottoman with a cloth using a furniture stapler or a glue gun. We decorate according to your taste.

As you can see, with a little skill and creativity, you can quickly make exclusive seats for a fun company.

Do-it-yourself tire sofa

For a complete furniture set, you can also make a sofa out of tires with your own hands. In manufacturing, it is a little more complicated than a table and ottomans, but still quite doable.

For its manufacture you will need the following materials:

Large truck tire
Foam rubber 2 types
Furniture stapler
Thick plywood sheet
Fabric for sofa upholstery and upholstery
Wooden bars for the back of the sofa
Nuts, bolts

As you can see, the materials are quite affordable to make a comfortable sofa with your own hands.

Let's get to work:

We cut out a circle from a plywood sheet 3 cm smaller than the diameter of the tire.
We fasten the plywood to the tire with a drill and self-tapping screws.
From thicker foam rubber we cut out circles with a diameter larger than a plywood circle. Using a glue gun, glue the foam rubber to the plywood.

We make the base of our sofa. We fasten thin foam rubber to the tire using a stapler. If your sofa has legs, then along the perimeter of the base we make markings where they will be located.

We take the fabric for covering the base and pull it tightly with the help of furniture staples. Further, if required, cut out holes and fasten the legs of the sofa with bolts.

From wooden bars we make the back of the sofa. With the help of fasteners, we fasten it to the side of the structure.

The final episode of the creative work on the manufacture of a sofa from tires will be the design of a soft sofa back. We take foam rubber, fold it in two layers and pack it in a cover made of fabric, which is the seat of our sofa. We attach the soft cover to the back of the sofa with glue.

At the end of the design, you can cover the sofa with the same fabric that was used to decorate the ottomans. And then the set will look like a single whole.

If you did everything qualitatively in the manufacture of furniture from tires, putting your soul into it, then such furniture will serve you for many years.

Wash the tires thoroughly with special products and dry them thoroughly.

For painting, it is better to use acrylic paints or spray paints. They are easier to work with and the result is more accurate.

Before starting work, carefully check all tires for sharp objects so as not to get hurt in the process.

And also from car tires, if desired, you can make a deck chair for sunbathing, a couch, and even a full bed. It all depends on your desire and creativity.

Photo of tire furniture

It's not good to throw away what you can reuse.

This is especially true for materials that are harmful to the environment, such as tire rubber.

Used tires are a valuable material for craftsmen.

At home, in the country and in the yard you can build many interesting crafts from old tires.

Skillful hands of craftsmen turn them into proud swans, decorative wells, comfortable benches.

How to make furniture from tires with your own hands - later in our article.

There are several options for creating tables from tires. Let's dwell on each of them in detail.

On two stacks of wheels

Washed, dried, fat-free rubber wheels without disks are first painted with acrylic, bituminous, enamel paints.

The most suitable coloring mixture for the treatment of tires - rubber paint. It withstands hundreds of cycles of sudden temperature changes, as well as atmospheric precipitation, without cracking or deforming.

The tires are stacked one on top of the other in the place where the table needs to stand. You need to install two stacks tires 4 pieces, preferably in different colors, at a distance of about half a meter between the outer walls.

On top of two stacks of multi-colored tires, a rectangular sheet of strong material is laid flat, which is at hand:

flat plywood;
plastic;
thick unbreakable;
metal sheet.

To the top rail of each stack of countertop fixed with four diagonal screws in places of contact.

The edges of the sheet should protrude beyond the outer diameter of the tires by at least 10 centimeters.

The table top can also be painted in any color that pleases the eye.

To prevent the wheels from moving, there are two ways to fix them:

inside each stack of tires pour earth or sand;
each joint between tires coat with binder- hot 1 cm thick, which will allow the tires to adhere securely to each other after drying.

Depending on the design, such a table will fit perfectly in the country, on the playground, in the garage.

Magazine

This type of product is made from one tire, but larger sizes. By the same principle, you can make stools and chairs.

In the form of a full-fledged dining table, of course, it will not fit, but it can serve perfectly as a coffee table.

Let's get started:

Tire of the right size wash and dry.
Find four legs from an old armchair or make them yourself.
screw legs to the tire with screws.
Above put a circle glass, plywood or plastic to cover the disc seat.
Decorate- completely wrap the tire on all sides with yarn or create a pattern on the table top.

Such a decorative table with legs will serve as an effective stand for a beautiful vase, magazines, pocket items.

Wicker

The next method will require a little more effort and creativity.

Procedure:

Cut a truck tire along the tread into two equal halves. One half will serve as a countertop.
Cut the outer bead off five smaller car tires to make five rubber rings.
fasten with screws four rings at the bottom on four sides vertically to the countertop. With the fifth ring, connect together the vertical rings on the floor surface. This will be the reference plane of the table.
Remains of rubber bands tightly twist the mounting hole for the disc in the countertop.

At such a table it is great to play board games in the evening in the country, read newspapers.

Chair making

To make chairs from tires, you need to follow these steps:

Prepare one whole tire - wash, dry, degrease.
From another clean dry tire cut off one outer bead.
paint both blanks in any color you like.
saw off with a hacksaw, four round wooden logs with a diameter of 6 cm. Two of them are 90 cm long, and the other two are 45 cm long.
close disc hole in a whole tire with a plastic mesh, sewing it with a harsh thread to the sidewall. This will be the seat of the chair.
Stretch and sew the same mesh to the bead, cut off from the second tire. This will be the back of the chair.
screw with long screws to the whole tire, two short logs on one side - these will be two legs. Also screw two long logs on the opposite side with screws - these will be the other two legs with a back.
Screw the cut off round bead from the second tire with a stretched plastic mesh to the back between two high logs with screws.

The country chair is ready, you can rest on it in between work on the site.

Country chairs from old tires

There are several options for creating a product. Let's dwell on the most popular, spectacular and uncomplicated.

Cut off the sides on one of the tires. Cut the formed ring on one side.
Cut off one third of the second tire along with the bead.
paint two whole tyres, one piece with the bead cut off in the form of a split ring, and a second piece representing one third of the tire with the bead.
For the manufacture of one chair from bald tires, you need fold two whole tires on top of each other.
To fix the joints between them, it is necessary smear with hot bituminous mastic. Glue or sew a plastic grate onto the top tire with a harsh thread.
To top cover screw or bolted vertically one third of the tire with the bead bottom.
To the top of the vertical one third of the bead also screw the middle parts with cut edges. Bend this part in the shape of the back and handrails of the chair.
Lower ends fix with screws or bolted to the top lying tire.

It turned out to be a very comfortable chair made of tires for a summer residence, a private courtyard, a recreation center.

It is best to build several of these chairs for all family members.

Another seat option:

You will need one whole tire, and from the second tire you need cut a sector of one third.
Wash both parts, dry, paint with black rubber paint.
Find legs from an old armchair or from a Soviet TV. Fasten the legs with screws to the bottom of the whole tire.
Saw off two either three wooden blocks about 5x5 cm in size, 40 cm long. Sand, paint with black rubber paint.
Hole for the disc in the whole tire on top close with plywood covered with leatherette. This will be the seat of the chair.
Also close the inner cavity and ends of the second tire with a cut-out sector with plywood and cover with leatherette. This will be the back of the chair.
Assemble the structure: screw two or three bars to the tread surface of the whole tire.
Screw the backrest with screws higher to the bars.

It turned out a cozy chair with a minimalist and concise design.

It can be as in the photo or slightly modernized depending on the materials that are at hand.

Why not an imposing leather armchair from a designer furniture salon!

It is not a shame to furnish with such not only a summer cottage, but also creative interior apartments or houses.

In Europe, such furniture in living quarters is no longer a rarity, because the environmental trend is gaining popularity every year.

Other furniture and crafts

At the dacha, every object, every useful thing is welcome. There is a spirit of fantasy and creativity here. Every seemingly unnecessary item will always find its use. Worn-out automobile rubber is a valuable material here, a strategic raw material.

They make excellent front gardens for flowering plants and green spaces from it. Tires make brightly colored houses.

Benches for sitting, rocking chairs, funny insects and striped caterpillars, flowerpots - this list of uses for old tires is endless.

Useful video

In this video, the process of creating furniture is shown more clearly:

Conclusion

The main process of creating crafts is a flight of fancy and collective creativity. The whole family can be involved in the manufacture of furniture, and children will be happy to participate. This is how country masterpieces are born from old worn tires.

In contact with

With a little free time and unnecessary tires left, you can easily create crafts from car tires for the playground with your own hands. We will provide you with ready-made ideas, photos and diagrams that clearly show how to cut and make toys and products for kids. Usually, in the territory of the post-Soviet countries, tires are used to protect school and kindergarten territories, courtyard flower beds. We offer several fun options for crafts that will decorate the playing area and bring the kids to complete delight!

Variants of children's crafts from old car tires.

Sandboxes

One of the most common and easy crafts to make is a children's sandbox. To create it, you can use either one large tractor tire (convenient for one child under 5 years old), or several tires from a car.

To make a sandbox, you will need the following materials:

Tires (one or more).
insulating material.
Spray cans with waterproof paints of the desired shades.
Washed sand.
Shovel.

It is convenient to make a sandbox for one kid from one big tire. To protect from the sun, you can install an umbrella in the center.

Step by step process:

It is necessary to dig a recess along the diameter of the future sandbox. It will help to fix the tire and reduce its height if you are using a large tractor tire.
At the bottom of the recess you need to lay insulating material. Its use will allow the sand not to mix with the ground, prevent the germination of weeds and the ingress of insects into the sand from the ground.
The tire must be washed and covered with paints for outdoor use.
Next, it remains to install the tire in the recess and fill it with sand.

If several small tires are used to create a sandbox, they will first need to be cut with a jigsaw and laid in the selected shape.

In such a large sandbox-flower, it will be convenient for several kids to play.

A flower-shaped sandbox made of several tires is a convenient option for several children.

Swing

Another popular craft, so beloved by all kids, is the swing. There are several options for how to make them.

Option 1

For the manufacture of this type of hanging swing, you will need a reliable support in the form of a structure made of wooden beams or a metal frame. The tires must be cut into two parts, painted and tied with a strong cable to the support at the two edges.

Hanging swing on a metal support.

Option 2

The next version of the hanging swing is more suitable for older children. They are made as simply as possible - a strong rope is attached to the tires placed horizontally or vertically by a metal hook and suspended from a support. Usually a strong branch of a tree acts as a support.

For the manufacture of swings, it is important to choose undamaged, durable tires that can easily withstand the load when riding.

Hanging swing from whole tires.

Rocking chair-balancer

Another favorite type of swing for children is the swing-balancer. And tires are suitable for their manufacture as well as possible. Usually balancers are created in the form of horses, but you should not be limited to any shape or color.

A bright balance beam with jumpers for riding two kids.

Such a balance horse is suitable as a toy and decor for a playground, but if you remove the wooden base, the horse can be used for riding.

Horse balancer.

If you attach a steering wheel from an unnecessary bicycle to the balancer, you get a great toy for a child, which will be comfortable to hold on to while riding.

Balancer, stylized as a bicycle.

Vehicles

Crafts from cars, tractors and trucks for the playground will delight the kids! Products can be of varying complexity depending on the skills of the master.

Machine made of wheels and a plastic seat.

Figures of animals and characters

Making figures of animals and characters is another original idea for using tires in the playground. Obviously, kids will not be able to play with such products, but they will organically fit into the exterior of the playing area and will definitely cheer up both children and adults.

Snowman from car tires.

Arrangement of a sports and playground

A children's playground can be completely made of tires. In addition to the elements already listed (ordinary swings and balance beams, sandboxes, figures), various obstacle courses, transitions, and climbing elements can be made from unnecessary car tires.

The snail train can serve as a bench or a climbing simulator for the little ones.

A simple walker in the form of a snail for the little ones.

The walker in the photo below is already more complicated in design, therefore it can be used by school-age children. The manufacture is as simple as possible: you need to attach the tire halves to the vertical supports with screws.

A walker of a more complex design in the form of steps to a slide.

For many elements of a children's playground, tires do not even have to be cut. It will be enough to securely attach them to metal or wooden supports.

Climbing element of their tires and pipes.

The next climbing element is created very simply from painted wheels, metal supports and planks.

Option for manufacturing a climbing element.

From car tires, you can build a kind of simulator if you attach them one after the other with ropes (metal chains) to a wooden support.

Tire walking and balance trainer.

Thus, if you have several old tires stale, do not rush to get rid of them - you can make original crafts for the playground with your own hands from tires in just a couple of hours, and according to our diagrams and photos, you can easily understand how to cut and assemble original products for playing area.

You can find more craft ideas from old car tires in the following video:

Almost everyone has a car and if you take care of your car sooner or later old unnecessary tires will appear. Many people leave them at service centers, service stations, or simply store them in the garage. But few people know that old tires can be given a new life and useful things can be made from them: garden furniture, swings, planters, flower beds and beautiful decor items. And in this article I want to tell you about interesting and useful do-it-yourself crafts from car tires.

"Caterpillar"

To decorate your garden or yard, our craft is a very cute caterpillar made from car tires. This craft will also become an original flower bed. She will delight you with her appearance and give a smile.

You will need:

Tires for automobiles - 7 pcs.
screwdriver
self-tapping screws
Dye
Plastic bottles - 8 pcs. (1.5 - 2 liters)
Plastic bottles - 2 pcs. (0.5 liters)
glue moment
Scissors
Shovel

How to do:

The first step is to paint the tires bright green and let them dry.
When the tires are dry, you will need to fasten them together with a screwdriver and self-tapping screws. We fasten only 7 pieces.
Dig a trench for the future caterpillar. At the beginning, the tire should fit into the trench by 70%, then we reduce the depth of the trench so that the last tire goes deep into the ground by 30%. Thus, our tires on the surface are at an angle.
We take the remaining tire and cut off the side court on one side to the tread pattern.
We attach the cut tire to the body, using a screwdriver and self-tapping screws, so that we get a mouth.
From six bottles, we cut off the bottom and fasten it to our caterpillar with self-tapping screws as shown in the photo.
From two large bottles we will cut out the eyes. To do this, cut the bottle in half and make cuts to the bottom to get cilia - 6-8 pieces. The rest of the walls of the bottle are cut off to the bottom.
We fix the eyes on the first tire with self-tapping screws.
For small bottles, we also cut off the bottom and glue it into the eyes with the convex side out.
Next, we fill the earth in the tire-mouth and plant flowers. Our caterpillar is ready!

DIY tire chair

For beginners, I want to offer a fairly simple car tire craft, which will become a cozy and comfortable chair in your home or country house. In order to learn how to make such a chair with your own hands, see our master class with step-by-step instructions, photo and video description.

You will need:

Car tires — 2 pcs.
screwdriver
Long screws
Felt
Construction stapler
Plywood
furniture foam
Piece of thin foam

Progress:

We put the tires one on top of the other and fasten them with self-tapping screws.
With felt, you need to close the bottom of the chair, using a stapler. We do this in order to later make it easier to move it around the floor.
From the furniture foam we cut out a circle as the outer part of the tire and insert it inside the upper tire. This will require some effort.
We put a circle of thin foam rubber on top and fix it with a stapler.
Plywood needs to be bent along the contour of the tire and attached in a semicircle to make a back.
We wrap the entire surface of the back with thin foam rubber and fix it with a stapler.
Now take a blanket or bedspread and put it on a chair in the form of a cover. To create the look of the cover, you need to fix it on all sides with a stapler.

Tire bed

If you want to decorate your garden with flowers, then such a flower bed is ideal for this purpose. She herself looks like a big flower and will serve as an additional, but not the last decor of your garden. Working on such a craft requires time and effort, but the result will please you. Let's see a step-by-step instruction with a full description of how to make a flower bed of tires with your own hands.

You will need:

Car tire with disk
File
Paint any color
soapy water

Progress:

You need to put the tire with the disk on the ground and use chalk to draw a pattern in the form of sharp petals.
Now, with the help of a sharp knife, we proceed to cutting. To make it easier to cut, moisten the cut with soapy water.
Now the most difficult thing is to turn it out, it is not so easy to do it, you have to try. Carefully turn it out in a circular motion, fixing the already bent edges. Better to help you.
You will get a vase on a leg from a disk with openwork edges.
Wash the tire thoroughly with soap to remove dust and dirt.
Let the tire dry and you can apply paint on it. It is advisable to have several flowers on hand, this will make the flower bed more colorful.

Palm

The palm tree is a symbol of summer, sea and warmth. And with the help of it, you can create an unusual mood and it will not seem to you that you are not on your site, but on the sea. Let's start doing our crafts with our own hands.

You will need:

Car tire — 3 pcs.
wooden pole
Twine
soap solution
screwdriver
Long screws
Paint (green)
Shovel
small wooden square

Progress:

We dig a post into the ground, in the place where you need to install a palm tree.
We wrap the pole with twine in dense rings, fixing it with glue. We will have a trunk.
We nail a wooden square to the top of the pillar.
Color the square green.
We cut the tires in half across the court, while moistening with soapy water.
Cut out palm leaves from the halves of the tire. You should get 6 pieces.
Paint the leaves green.
We fasten the leaves to the crown of the trunk with the help of self-tapping screws. Palm is ready!

Tire swing

For your child, you can make a tire swing without spending a lot of time and effort, and the child will be very pleased. You can make such a swing in your yard, in the country or in the area so that your baby is not bored.

How to make furniture from tires with your own hands? Very simple, you can make a variety of crafts from car tires. Old car tires are becoming more and more popular in everyday life. Ask how they are used? Yes, very different! You may not believe it, but tires will not only decorate your garden or vegetable garden, but can also serve as furniture.

Crafts from tires, including furniture, can be made independently with your own hands. They will not only look great in the overall garden design, but also play their extraordinary role.

Do-it-yourself furniture from car tires

It is logical that to create our furniture, you will need old unnecessary tires, which it is high time to throw away. With the help of master classes, we can give them a second life and give them the opportunity to serve us a little more.

Read also: different crafts from tires with your own hands for giving.

So, moving on to the specifics, let's look at some furniture options that can be made.

Soft puffs from tires

Ottomans are always useful in the garden or in a country house. Arranging a barbecue or barbecue party, you can seat your guests on such ottomans.

To turn fantasy into reality, you will need tires and fabric that you don’t mind using. The point is to wrap the tire with a cloth (you can use a belt too) and give it an attractive look. The tires themselves are pre-fastened together.

The average figures recorded that it takes about an hour to complete all the work. Agree that this is a fairly quick and inexpensive business.

The diameter and size of tires can be completely different. The main thing is that they are not severely deformed or traumatic in terms of scratches and cuts.

Tire coffee table

Continuing the theme of do-it-yourself tire furniture, we can consider the option of a coffee table. It sounds quite unusual, looks interesting and is done very simply.

It is important to know that this table will be made in an eco-friendly way and will not harm the environment, which is also very important.

Of the materials that we need - it will be first of all the bald rubber of an unnecessary old tire. Since the appearance will not please us very much, we will hide the tires with a natural tourniquet cover. For this we need a rope. You can use both synthetic and natural. The main thing to note is that the tightness of the fit will depend on the diameter of the rope. With a small diameter cord, you will have to tinker, but the result will be thinner and more elegant in appearance.

List of materials to have on hand:

Tire.
Plywood, from which two circles can be cut, the diameter of which will be slightly smaller than the tire itself.
Harness, rope or cord for decoration.
Super glue or glue gun.
Self-tapping screws and drill.
Finishing coat - it can be varnish or wax.
Wheels for a coffee table.

Progress:

Do-it-yourself tire sofa

To our ottomans and tables, you can still make a sofa out of tires so that the composition is in full.
And so, to begin with, we will decide on the materials that will be needed in the work.

We will need: