It happens that old furniture becomes unusable. You can use it, but the appearance does not evoke positive emotions. To extend the service life of the product, it is necessary to restore it. Before you restore an old cabinet, you need to decide on a set of tools, as well as the equipment that will be used.
The components that will be used during the restoration of the product depend on the chosen work method. If you don’t have specific decorating skills, don’t despair – we recommend paying attention to the following types of work:
- painting the cabinet;
- use of craquelure varnish;
- Decoupage technique.
Painting
Craquelure
Even a teenager can carry out these methods of repairing a product. Restoring a cabinet with your own hands requires having an idea or choosing the style of the future masterpiece. To do this, you should turn to the existing interior: if it is made in a vintage style, the craquelure varnishing technique will do. If the interior is made in a classic style, choose painting followed by applying an image. When the design of a room requires elements of romance, decoupage is a good solution.
Restoring a chipboard cabinet begins with repairing visible defects. To move on to decorating the facades and ends, you should carefully inspect the hinges of the product and check the integrity of the fittings. Open the cabinet and inspect the drawer mechanisms and check the interior for chips and holes. All noticed defects must be eliminated. This can be easily done with a hammer and nails, as well as by replacing faulty mechanisms with new analogues.
A universal list of tools for restoring an old cabinet with your own hands looks like this:
- sandpaper or sanding machine - to give the plane a flat and smooth surface;
- a screwdriver or screwdrivers along the diameter of all bolts - for possible adjustment of the product and removal of fittings before cleaning;
- spatula - for covering holes and chips;
- a paint roller and a narrow brush - in order to renew the coating;
- wood glue or PVA;
- set of screws for replacement.
Directly for the decoupage technique you will need napkins with a pattern or ornament, acrylic varnish, and a special thin synthetic brush with fan-shaped bristles. Also, restoration of an old cabinet requires the presence of a primer, wood putty, paint for painting, and masking tape. To use craquelure you will need a varnish of the same name.
It is necessary to immediately decide on the idea of restoration, because without an idea it will not be possible to make a beautiful product. Consult with your household and find out about their wishes.
Tools and materials for decoupage
Stages of restoration using painting
Before studying a master class on painting clothes storage products, it is recommended to carry out preparatory work on wood. These include cleaning and sanding the old coating. It is important to achieve a smooth surface so that when painting the brush applies the composition evenly.
For small areas, use sandpaper; for larger areas, use a sander. The final stage of preparation always involves using the finest grain sandpaper.
As soon as work with defects is completed, decorators advise moving on to primer. This stage is no less important than the painting itself. It is necessary to restore an old cabinet with your own hands with high quality, so primer will be an excellent solution: it will hide all the cracks and fill the pores. In addition, the coating treated with primer will absorb less of the coloring composition.
After waiting for the product to dry completely, we restore the cabinet using paint:
- unscrew all the fittings that will prevent the brush from penetrating into narrow places;
- those elements that cannot be removed are sealed with masking tape to preserve their original appearance;
- When painting wood, it is better to use special acrylic compounds - they adhere better to the surface and create a protective layer of film. Pour the paint into the roller container and get to work;
- First we process all the internal elements: shelves, compartments, mezzanines. After this, we proceed to painting the facades, as shown in the photo;
- After the first layer has dried, apply a second, and if necessary, a third layer of paint. This is necessary to achieve color brightness and complete coverage of all gaps;
- The dried cabinet must be opened with varnish in several stages.
Restoration experts advise you to use your imagination and make the cabinet not in a single color, but add several colors to the facades. The simplest option is geometric shapes. To do this, use masking tape to cover some part of the facade and paint the remaining area a different color. For originality, you can decorate the cabinet in a contrasting design.
Removing old coating
Sanding parts
Chips are repaired with putty
Surface primer
Painting parts
Using craquelure
The technique of coating wooden products with a special varnish consisting of 2 components will transform an out-of-fashion cabinet. With its help, it is possible to create an old wardrobe that grandmothers used. To complete the work you will need PVA glue, craquelure, acrylic paint and varnish, and a wide brush.
The technique also does not require specialized talent; all manipulations are similar to conventional coloring. The algorithm of actions looks like this:
- preparation - the old product is sanded, if necessary, putty is used to seal large holes. The final stage of preparation will be a primer in several layers;
- coloring - for work you will need compositions of 2 colors: dark and light. They do not have to be in harmony - the dark version is used to decorate cracks, and the light version is used for the main coloring. Using a brush, apply a dark color, evenly distributing it over the surface of the product;
- craquelure - once the paint layer has dried, you can apply craquelure. This must be done quickly and preferably in several layers - the thicker the varnish, the more visible the cracks will be. Dry the product until your fingers stick slightly;
- the second color - a master class on craquelure at this stage suggests applying a light color and waiting for it to dry gradually. As soon as the coating dries, a characteristic mesh will become visible;
- applying varnish - a completely dried restored cabinet is coated with acrylic varnish to consolidate the effect.
When choosing craquelure, it is worth considering that if there is an image on the cabinet, you should not touch it. For this, a two-phase composition is used, the work with which is characterized by application in 2 stages.
This technique is suitable for restoring cabinet facades, but similar manipulations can be performed inside the product. This beautiful antique wardrobe will appeal to all lovers of vintage interiors.
Decoupage
Modern art stores will surprise any novice craftsman or amateur with an abundance of assortment of napkins and paper for decoupage. Napkins have a small format and are often used to decorate small items. In the case of a cabinet, they can be considered as elements for the design of drawers or mezzanines. Decoupage paper is available in large sizes, so it will be optimal for this type of work.
Before restoring the cabinet, select a theme for the product. These can be floral motifs, historical ornaments, images of people, heroes, or just vintage pictures. Decoupage consists of several stages:
- The surface prepared for repair is sanded and primed in several layers. After this, light acrylic paint is applied to create a background;
- at this stage, paper materials are applied to the surface of the cabinet, mentally coming up with the plot and location of each detail;
- Transferring a picture to a surface is considered one of the most difficult tasks. You can use the "file method" to do this. Prepare a regular office file, remove the top 2 layers from the napkin and place it face down on the file. Next, take a spray bottle of water and gradually wet the entire napkin. As soon as it gets wet, gently use your fingers to try to push out all the bubbles. If this is not done, wrinkles will be visible on the product. As soon as the napkin has become even and smooth, we apply it along with the file to the surface of the cabinet. Carefully delete the file and move on to the next step;
- using a thin synthetic brush and special glue, treat the surface of a napkin or paper in 1 layer;
- As soon as the napkin sticks and dries, you need to treat the surface with acrylic varnish. The photo shows options for decoupage of old cabinets.
Restored furniture gives the room a fresh look - it looks original, non-standard. Such products will delight all guests, positioning the owner as a budding master of decor.
Elements that do not require restoration are covered with masking tape
Painting furniture elements
Glue the napkin
Applying clear varnish
Video
Photo
Many people are in no hurry to part with old furniture and resort to do-it-yourself cabinet restoration. Let's talk about how to do this at home, without financial or physical costs.
Many people are in no hurry to part with old furniture and resort to do-it-yourself cabinet restoration.
Restoring an old cabinet is a painstaking task, but you can do it yourself. Many houses have old furniture, creating a nice and comfortable nest for families. This is why people came up with the idea of restoring old things so that they could take on a new look and bring joy for several more years.
Restoring furniture with your own hands is not only exciting.
Basic cabinet makeover tools can be found in every home. If for some reason you don’t have tools at home to work with old furniture, you can easily purchase them at the store.
The decor of the cabinet can be fixed with patterns or pasted over with various fragments from old albums and books.
Restoring an old cabinet is a painstaking task, but you can do it yourself.
The main advantage of restoration at home is that the bulky cabinet does not have to be taken outside its abode. The second plus is that you watch the whole process yourself and it’s easy to make any changes. About the third, as mentioned above, all tools are easily accessible.
Each master puts a piece of his soul into his products - this is not a metaphor.
This is why people came up with the idea of restoring old things so that they could take on a new look and bring joy for several more years.
In general, only creative people can cope with such work, since they need to choose the right tones, shapes, and more. But if you approach your work more responsibly, then, perhaps, even without much talent, you can transform your old wardrobe, which has remained necessary for many years.
Basic cabinet makeover tools can be found in every home.
- Art Deco
To decorate such decorations, interesting and very expensive materials are often used that will last for many years. A distinctive feature of this style are various geometric patterns. They use bright colors for the interior, which at the end of the work are diluted with lighter and softer tones.
- Decoupage
This style is mainly used only on wooden surfaces. It involves gluing cut-out figures and patterns, finishing them if necessary. A common and original way in this style is to use napkins with patterns and secure them with acrylic varnish ohm in several layers.
- Covering with regular self-adhesive film
The name speaks for itself; various patterns are created using self-adhesive film. Stencils are often used. One of the easiest and most effective ways to restore old wooden surfaces.
- Craquelure
This interesting method, on the contrary, emphasizes the antiquity of your furniture with the help of a special craquelure that creates cracks on the surface. The main thing in this style is to create deeper and wider cracks; for this it is necessary to apply thicker layers.
When starting work, inspect the location of your furniture, what colors and tones should be chosen.
Let's talk in more detail about the last method.
Wooden cabinets dry out, causing cracks to form. Our job is not to hide, but, on the contrary, to give beauty and elegance to the cracks. There is a huge variety of varnishes now. It’s up to you to choose the color that suits your interior. Once you have chosen the desired color, you need to prepare for work.
The main advantage of restoration at home is that the bulky cabinet does not have to be taken outside its abode.
If you still doubt whether you made the right choice in the direction of this style, you can experiment on some small wooden things. Only the surface should be wooden and preferably antiqued, for a more convincing effect.
The second plus is that you watch the whole process yourself and it’s easy to make any changes.
Materials for decorating the surface of an old cabinet:
- acrylic paint;
- craquelure varnish ;
- matte acrylic .
When restoring a cabinet without the help of specialists, you estimate the cost of the work, which also has a positive effect on your budget.
The main thing is to approach all the work creatively and then your closet will take on a newer and brighter life.
Tools for restoring the cabinet surface:
- brushes (different sizes);
- pieces of fabric without fine lint;
- container for diluting the product.
Only creative people can cope with such work, since they need to choose the right tones, shapes, and more.
To quickly dry the surface, you can use a hair dryer, but it also helps to increase cracks.
When purchasing materials, be sure to check their quality. The varnish should be quite liquid. When applying, do not shake the bottle under any circumstances, otherwise subsequent application will be of poor quality if there are bubbles.
They use bright colors, which at the end of the work are diluted with lighter and softer tones.
Do-it-yourself cabinet restoration consists of the following steps:
- replacing cabinet fittings;
- cleaning old cabinets;
- necessary repairs;
- decoration in craquelure style.
Wooden cabinets dry out, causing cracks to form.
You can check how dry the furniture is with your finger; if it sticks slightly but leaves no marks, the surface is ready.
Step-by-step restoration instructions
We clean the surface of the cabinet from the old coating with sandpaper. Then we cover it with acrylic paint, the color should be such that it matches your interior, it will be the main one. If you want to preserve the color of the cabinet, then apply a clear coat of paint.
There is a huge variety of varnishes now.
The thicker the layer you apply to the surface of the old cabinet, the wider and brighter the cracks will be.
After complete drying, the next layer of coating is craquelure varnish. The thicker the layer you apply to the surface of the old cabinet, the wider and brighter the cracks will be. After applying the second layer, the surface must dry thoroughly. You can check how dry the furniture is with your finger; if it sticks slightly but leaves no marks, the surface is ready.
Once you have chosen the desired color, you need to prepare for work.
When applying the second coat of paint, you need to act very quickly and move the brush in one direction. A Soviet cabinet is covered with one layer. If you decide to create a Venetian layer of plaster, then you should apply the paint with pieces of cloth or a sponge.
Only the surface should be wooden and preferably antiqued, for a more convincing effect.
After the paint has completely dried, a final layer of varnish is applied; it may already be matte. To quickly dry the surface, you can use a hair dryer, but it also helps to increase cracks.
When purchasing materials, be sure to check their quality.
The decor of the cabinet can be fixed with patterns or pasted over with various fragments from old albums and books. Only your imagination and interior will help here. The main thing is to approach all the work creatively and then your closet will take on a newer and brighter life. Don’t doubt your efforts, feel free to get to work and you will definitely be satisfied with the result!
The varnish should be quite liquid.
We clean the surface of the cabinet from the old coating with sandpaper.
VIDEO: Cabinet restoration
50 photo ideas for restoring an old cabinet
Nowadays, in stores you can find an endless variety of different cabinets, chests of drawers, hanging shelves, racks, multifunctional drawers for personal belongings and clothing. However, if you decide not to immerse yourself in a long search, but to follow your imagination, then thanks to the following tips and master classes you will learn how to update an old cabinet that has lost its appearance so that it will please your eye for a long time.
3 main ways to update your wardrobe:
- Painting is the most win-win method.
- Wallpaper, decoupage, self-adhesive film - when choosing this method, do not forget that it is short-lived.
- Decoration with nails or fabric covering.
Important! The best way to update any wood or chipboard cabinet is to paint it. It is not as expensive as it might seem at first glance and is quite easy to do.
Which paint to choose?
To bring such an idea to life, you need to thoroughly prepare for the process. Let's get started.
For processing chipboard and wood you can use:
- Acrylic or alkyd, regular or spray paint on wood;
- for deeper coloring - varnishes, but more often preference is given to acrylic paints.
Acrylic paints are non-toxic and dry at room temperature, which is very good when painting home furniture. In stores, these paints are presented in a wide range and can be colored - diluted with white paint to get the desired color. In addition, such paints are available with a mother-of-pearl effect, thanks to which you can bring any fantasy to life.
Important! Aerosol acrylic paint will be better than regular paint, as it lays on the surface creating a beautiful, smooth, evenly painted structure. It is easy to work with both professionals and beginners.
Master class No. 1. Stencil painting
What can you make from an old wardrobe? Yes, anything - it all depends only on your imagination. One of the great ways to transform furniture is to paint it with a stencil.
Tools and materials:
- White paint;
- Solvent;
- Brushes;
- Stencil.
Step by step guide:
- First, you need to remove all the fittings from the cabinet: handles, locks, etc. Prepare the cabinet for painting.
- We spread newspapers or a large piece of polyethylene on the work surface (on the floor) so as not to damage other furniture in the room.
- Take white enamel and solvent. In a small plastic jar, dilute the paint and solvent according to the instructions that you will find on the paint can.
Important! The paint consumption should be indicated on the can - it is better to use the information provided and immediately dilute the required amount. If you dilute too little paint, you may end up with a different shade next time.
- Make the background of the picture - apply the first layer of paint. Leave until completely dry.
- If you like the resulting color, then take a stencil and apply it to your cabinet. Carefully glue it to the front side and side walls so that no bubbles form.
- Shake the spray paint thoroughly and spray it onto the stencil. One coat of paint will be enough for an even layer.
- While the paint is drying, paint the hardware that was previously removed from the cabinet gold leaf.
- After the parts have dried, screw them into place.
- Carefully remove the stencil from the cabinet - it is no longer needed.
Master class No. 2. Updating a chipboard cabinet
If your closet looks simple and cheap, since it was made of simple chipboard, you can update it with an ornament from a children's room, and it will fit perfectly even into a Modern or High-Tech interior.
Materials and tools:
- Pre-prepared cabinet;
- White paint;
- Masking tape;
- Pencil;
- Sponge brush;
- Building level;
- Additionally: protective paint (enamel).
Step by step guide:
- Prepare the furniture by cleaning the surfaces from chips, roughness and cracks using primer and putty.
- After using special products, allow the surface to dry completely.
- Take masking tape and apply it to the front of the dresser according to your design.
- Make combinations of triangles along the bottom and top edges, diamonds in the middle, and rectangles at the bottom and top. Cut the strips and make shapes out of them.
- Make a diamond by cutting out identical strips and placing them perpendicular to each other.
- To make rectangles, first apply the tape evenly, parallel to the cut of the chest of drawers, and use a pencil and a building level to mark equal intervals. Cut through one.
Important! Pay attention to the placement relative to the figure (locks, handles) and the gaps between the drawers - it’s better to be symmetrical than even.
- Following the instructions on the paint can, take a sponge brush and apply a thin layer of paint to create an antique effect. Let the layer dry.
- After the first coat is completely dry, apply the second. Then the color will be rich and contrasting in comparison with the background.
- When the paint has completely dried and you see that you have achieved the desired color, carefully remove the masking tape (tape) at an angle of 45 degrees.
- The final stage is to apply protective enamel. It can extend the life of a chipboard cabinet and protect it from minor mechanical influences such as dust and moisture.
Thus, making a modern, beautiful and fashionable wardrobe from an old wardrobe will not be difficult and will not take much time.
Master class No. 3. Painting a polished cabinet
Someone may not believe it, but from an old polished cabinet you can make a very beautiful vintage-style cabinet yourself, without losing functionality.
Materials and tools:
- Polished cabinet;
- Acetone or white spirit;
- Vintage paint (acrylic matte);
- Gold drawer handles;
- Brushes;
- Sander or sandpaper.
Painting process:
- Although we will create a vintage effect, the cabinet does not need real shabbyness. Therefore, first, carefully prepare the chest of drawers for painting. To do this, remove all the old fittings and sand the entire surface of the cabinet. You should use coarse sandpaper first, then fine-grained sandpaper.
- It is not necessary to putty and prime, except for severe chips on the surface.
- Degrease the surface with acetone or white spirit and let dry.
Important! Since the paint will be applied in several layers, it needs to be well absorbed into the wood.
- Make the first coat of paint very thin.
- Once dry, sand the first layer with fine-grit sandpaper. Clean the chest of drawers from dust, but do not use wet sponges and rags - you can use a dry, lint-free cotton rag.
- Apply a second coat of paint, also rubbing it in. Leave to dry and then rub in a little again.
- Repeat this until the color is even and slightly rough.
Important! For this method, use matte paint with a vintage effect. After a few days, the paint will be completely absorbed and begin to turn yellow - carefully read the instructions on the package so that you don’t have to repaint everything again later.
If you purchased new handles, check that they are the right color and screw them into place.
Important! Carved brass handles with golden patterns will go well with an aged white chest of drawers.
Update with wallpaper
Updating an old cabinet with wallpaper is one of the simplest and cheapest options for restoring such furniture. For these purposes, you can use absolutely any wallpaper that you like or that suits the design of your room.
Important! Non-woven or vinyl wallpapers are often used, as they are highly durable.
Using this method, you can update the design of an old cabinet completely or in separate parts. Partial wallpapering of a closet is an interesting creative solution that is used by many famous designers to create an unusual look.
You will need:
- Roller or brush for applying glue;
- Glue (preferably PVA)
- Construction knife;
- Wallpaper.
Important! If you don't know how to update your old cabinet with glue and wallpaper, then you can buy self-adhesive wallpaper, which will make it much easier for you to achieve your plan.
To transform an item you should:
- measure the length of the cabinet;
- cut off suitable strips of wallpaper;
- apply glue to the surface of the cabinet itself;
- carefully place the wallpaper onto the adhesive surface;
- then smooth the wallpaper so that no bubbles form and let it dry thoroughly.
Updating using mirrors
One of the most extravagant ways to update furniture is to use mirrors.
Important! They can not only hide all the imperfections of the closet, but also expand the space of a small room, while making it brighter. Mirrors with a sandblasted pattern look original.
You will need:
- Pre-prepared furniture;
- Mirror canvases;
- Special fasteners or “liquid nails”.
How to proceed:
- First, you need to measure the surface of the furniture that needs updating.
- Then you should contact a workshop that makes mirrors - they will make them for you in the required size.
- Next, you need to apply “liquid nails” to the mirrors and attach them to the surface of the cabinet.
This concludes our review of possible options for updating an old cabinet. We hope that the proposed ideas were useful to you, and you have already tried them, getting excellent results and a lot of fun!
If you have recently made a renovation or are just about to start it, then in addition to the renovation you are probably tormented by the question of choosing furniture. For example, a new bedroom could use a new wardrobe that would harmoniously fit into the new interior. What do most people do? He buys a new cabinet, and the old one is sent to a landfill or to a country house. However, why spend money if you can make a stylish cabinet that will look in any interior from an old one! Moreover, for this it is not at all necessary to be a designer or have great skill in restoring furniture. All it takes is a good idea and a little time and effort.
For example, with a little effort and an excellent photo application, you can create a stylish wardrobe that will easily become the “star” of almost any interior. To do this, just sand the doors of the old cabinet with sandpaper, paint them with white paint, and then glue the image you like onto the cabinet doors, which can be printed in large format in any large photo studio. Then coat the cabinet with colorless varnish.
But you don't have to use beautiful photographs to give an old cabinet a new style. You can decorate it using shaped strips, which can be found in every hardware store. And then paint it with paint with streaks. You can see how this is done in the figure. Thin slats were nailed to the cabinet and then painted blue. As a result, instead of a traditional factory cabinet from the 60s and 70s, we get a stylized Mediterranean cabinet from the late nineteenth century, which looks great in a soft blue interior.
If you have an old favorite wardrobe that has seen its fair share of wear, is a little shabby, but very comfortable, or you don’t have plans to buy a modern fashionable compartment right now, you can update your closet with self-adhesive film.
Self-adhesive film comes in various colors and patterns, which allows you to easily make original furniture from an old wardrobe, you can cover shelves with film, update a cabinet on the balcony or kitchen, as well as improve country furniture, and much more can be done with the help of film.
Here's an example of how I updated my closet:
There are two types of self-adhesive film - this is a standard film, which can be glossy or matte, various children's, marble patterns and the like.
And also a special film - furniture, door or metallic, for various countertops.
When working with self-adhesive film, you must follow certain rules:
1. Prepare the surface for pasting; remove dust and dirt from it using water and adding detergents. The surface must be smooth; if it is not, then it must be leveled using primer or plaster.
2. When marking out the necessary pieces for pasting on the wrong side of the film, be sure to remember about the allowances along the edges, where they are required.
3.In order to glue the film, you need to remove the protective paper from the reverse side by a couple of centimeters and attach it to the surface to be coated with the adhesive side.
During gluing, you must carefully ensure that no air bubbles appear, so you must glue very slowly and carefully, all the time smoothing the surface of the film.
4.If bubbles have formed that cannot be removed, you can pierce them with a needle and smooth them out.
We present to you 4 tempting ideas on how to update an old wardrobe and turn it into a stylish interior element. A few cans of glossy paint, wallpaper, glue and your limitless imagination will help you.
Let's update an old closet
Paint it retro - modern
How to do it:
Remove the drawers, then sand the cabinet and paint the cabinet with two coats of gloss paint. Make blanks for the front of each box, cut out shapes from adhesive plywood with a special knife, then glue them onto the box. Measure the width and height of each drawer and cut four moldings so that the edges meet at a 45-degree angle. Paint them with glossy white paint and when the paint is dry, glue them onto the drawers. Wrap white electrical tape around the cabinet handles, then drill holes in each drawer and insert the handles.
What you will need:
White glossy moldings;
Quick-drying glossy paint;
African mahogany colored plywood;
4 drawer handles;
White electrical tape.
“Play” with the color of the cabinet
How to do it:
Remove the handles from the cabinet and paint the entire cabinet and drawers a base color. You can even paint the cabinet in two layers. The cabinet will be painted in three colors, so after the paint has dried, use the second color to create a clear line where the transition will be. Then draw another line where the third color will be. Then wet the brush generously with the second paint and paint from top to bottom, slightly pressing the brush at the first line so that the paint flows smoothly down. Do the same with the third color. Paint the handles of each drawer the appropriate color.
What you will need:
Dresser;
Fast drying glossy paint.
The charm of mirrors
How to do it:
Remove the drawers. Cut strips of wallpaper for the front side and glue them to the cabinet, leaving 1 cm on each side to tape the edges of the cabinet. Apply wallpaper glue liberally to the wallpaper itself and, when you glue it, begin to smooth it along the edges. Cut out the wallpaper for
the remaining sides of the cabinet and repeat the same. After the paint has dried, coat the wallpaper with varnish. Measure the dimensions of each drawer and the top of the cabinet. Order mirror panels and accurately measure the dimensions of the hole along the handle. Attach the panels with special glue. Once the glue has dried, screw the handles on - but don't over-tighten them as this may crack the mirror.
What you will need:
Mirror;
Special glue for mirrors;
Cabinet handles.
Be bold - use the 3D effect
How to do it:
Make large letters in any font you like in accordance with the proportions of your front drawers, or format the text in Microsoft Word or Adobe Illustrator and go to a company that will help you cut out the letters from MDF. Take out the drawers and paint the front and sides with two coats of gloss paint, then do the same with the cabinet itself (except for the back wall). Glue each letter using wood glue. Add wheels to your closet to give it a trendy, modern look.
What you will need:
Text from MDF (order it from a construction company). The text must be painted white with a matte emulsion;
Fast Drying Gloss Cabinet Paint in Celtic Forest ;
Wood glue;
Closet in a home interior, this is a thing that, as a rule, has been used for more than one year.
Unfortunately, we often encounter the fact that furniture that was once modern and served faithfully becomes outdated.
It is not surprising that over time its appearance loses its former luster: on surfaces scratches and cracks appear, varnish, dye fade, or change the rest furniture in the room makes it irrelevant in the new design. Ultimately, the question arises: what to do with it next?
The very foundation of such furniture, as a rule, remains quite strong, and it is simply a pity to throw it away.
In this case, there are two options. Either purchase a new one, or, if you have the desire and creative mood, update your closet with your own hands. The second option will significantly save money and allow you to be proud of your own piece of furniture art.
Why throw away something that can still serve well for at least several years?
What can be done from an old wardrobe ? There are many ways to update furniture. Before you get down to work, you should draw up a project in advance and imagine what the new look will be. Based on this, it will become clear that with help what needs to be finished furniture surfaces.
If your closet is well preserved and perfectly performs its utilitarian functions, then updating it will not be difficult.
Restoration techniques are classified based on the materials used: specialists use wallpaper and paint , photographs and fabrics, mirrors and decorative plaster. Having considered all the options, you can choose the most acceptable one and decide how to update an old closet.
As practice shows, you can give a second life to almost any thing.
One of the most economical and accessible ways updating an old cabinet with your own hands - wallpapering . This does not require any special skills or effort. The restoration procedure is no different from conventional repairs with re-gluing wallpaper - except that the surface will be different.
It is advisable to select a material that is easy to wash using special chemicals.
- First you need to choose a design wallpaper, color , which will “fit” into the interior of the room.
- Purchase the required amount of material, having previously measured the area of the body furniture.
- After this, all that remains is to cut the strips of the required length, apply a layer of glue on the surface of the cabinet and iron the glued wallpaper with a roller.
If there are certain designs and patterns on the room wallpaper, it is desirable that the furniture be finished with a single-color coating.
Using wallpaper can be turned old wardrobe into a harmonious part of the interior. Interior designers often resort to this technique when creating unusual projects.
Almost everyone can glue beautiful canvases, update old furniture, and restore it with their own hands.
Photo restoration
Another option on how to transform an old cabinet, - this is the use of photographs or photo wallpaper. This can be done with the help of printing companies engaged in large-format printing: with their help, you can enlarge any photographs and decorate the surface of the case with them, turning it into a panel or collage.
Modern technologies make it possible to make large-sized and high-quality pictures on almost any surface.
Before pasting the photo onto, needs to be cleaned surface old furniture paints and smooth it out by sanding and layer primer coating. After this, you can start gluing up photos. Consolidation of a new appearance is also practicedby applying layer clear varnish.
When applying a picture to glass or a mirror, the picture will be glossy, but on chipboard it will be matte, like a photograph printed on matte paper.
Paint Update
New design of an old cabinet can be created using repainting. Moreover, we are talking about how to refresh the tarnished surface , and radically change it color using paint , giving the furniture freshness and originality. This is one of the most popular restoration methods, opening up a wide range of possibilities for changing the interior and increasing the options for what can be done from an old closet.
The best way to decorate and update an old cabinet is to paint it.
Using paint will require preliminary preparation.
Fabric decor
Renew an old closet You can also use fabric. This will give the outline softness and volume and allow the furniture to harmoniously combine with the interior. The convenience of this technique is that you can change the selected one at any time. color without resorting to re-preparation surfaces.
The facade design fabric should be combined with the textiles already in the room.
To update you will need:
- Textile;
- P layering (sintepon or foam rubber);
- WITH heater for furniture.
The contrasting patterns on the fabric front of the cabinet are very elegant and also give the interior a “Japanese” atmosphere.
First, the lining is attached over the entire surface of the body using staples (another option is to use liquid nails). The material is stretched over it and symmetrically secured.
Stenciling
Applying decorative plaster is a more complex procedure that allows you to create three-dimensional facades with an unusual three-dimensional pattern.
This method produces three-dimensional elements, which can then be painted or gilded.
The updated surface can also be painted as desired. color , apply gilding or even patina, giving the effect of slight aging.
If the product you will decorate is covered with old paint, you must sand the entire surface with sandpaper.
To work you will need:
- D decorative plaster;
- Putty knife;
- WITH special tape;
- Sh trigger for stripping the body;
- T stencil (you can buy it or make it yourself from cardboard).
Rollers for decorative plaster.
You must first treat the areas where the decor will be applied. Stripping is done down to the wood layer. If there are cracks, it is recommended to cover them with a layer of putty to level them out. surface.
The stencil is attached to the cabinet using tape, and a layer of decorative plaster is evenly applied over it.
The stencil is removed before the plaster dries. Any irregularities that appear are smoothed out with a knife or spatula.
When the decor is dry, you can sand it again.
After this, you can begin painting or coating with acrylic varnish. This will save surface from damage for a long time.
Mirror decoration
An elegant solution is to install mirrors on the facades old closet.
Mirrors will add volume to the room and brighten the space, making it more attractive.
For such a transformation you will need mirrors and fixtures. Having carefully measured the facade, you can order canvases from a specialized workshop.
A mirror on the closet door will immediately transform the room and update the interior.
It is worth considering that the use of liquid nails implies a horizontal position of the surface. Therefore, you will either have to disassemble the caseor use conventional hanging mounts.
There is no need to cover the entire surface or apply thick stripes too close to the edge.
Old furniture that has served for a long time does not necessarily need to be replaced. With some imagination and a little effort, you can give it a new look with your own hands and increase its service life by several years.
We hope that our ideas and advice will be useful to you.
VIDEO: How to paint an old cabinet.
50 photo ideas for updating and decorating old cabinets:
