This is the most affordable and popular option. They are often used in budget fidget models. Main structural details: inner and outer rings, protective discs and balls are made of stainless or high carbon steel. Sometimes there are also exclusive options - from chrome-plated steel. The price of metal models directly depends on the type, brand and diameter of the products.
Main advantages:
- minimum noise factor;
- affordable price, large assortment;
- versatility - wide scope.
Among the shortcomings of steel bearings, low rates of speed and duration of rotation, as well as dependence on the "magnetism effect" are distinguished. Try to avoid frankly cheap bearing models that use Chinese "recycled materials" instead of high-quality stainless steel - such products are susceptible to corrosion and quickly become unusable. If you don’t know where to get a good quality bearing, ask a question to “experienced” users on thematic forums.
submitted by Do it with your hands 21.07.2017, 10:08
In spinners, ABEC class 5 models (high manufacturing precision) are most often used. This option is suitable for those users who like to feel the vibration of the fidget, as the ceramic bearings emit a characteristic “rust” when rotated. Internal elements can be made of zirconium dioxide or silicon nitride.
The price of ceramic bearings is higher than metal bearings, but this is understandable. They are lighter in weight, do not require additional lubrication and are practically not subject to mechanical damage and corrosion. And most importantly, the ceramic spinner bearing has a much higher torque and speed.
Main advantages:
- pleasant tactile sensations from vibration;
- do not rust, there is no "effect of magnetism";
- resistance to premature wear.
The obvious disadvantage of ceramic bearings is fragility - in case of an accidental fall, there is a high probability that the parts may “crumble”. When the fidget is rotated, a little friction is felt, and additional noise is also created. Not everyone will like it, but it's a matter of taste.
submitted by Do it with your hands 21.07.2017, 10:23
On sale you can find a spinner bearing which combines elements of ceramics and steel (hybrid version). Such "universal" bearings cost customers much less than conventional ceramic ones, but at the same time they are more expensive than metal ones. With proper care, hybrid elements will last a long time. They must be kept clean. If there is no money for a spinner with a ceramic bearing, then choose a hybrid option.
Positive points:
- long service life;
- high fidget rotation speed;
- low noise factor.
The disadvantages of hybrid models are similar to those of steel - they are susceptible to corrosion and are susceptible to magnetization during prolonged rotation.
submitted by Do it with your hands 21.07.2017, 10:35
Depending on the model of the "turntable", manufacturers use different brands of bearings: 608, 606 or r188. Bearings for a spinner whose size is 17 mm (brand 606) are rare. Therefore, consider the positive and negative sides of the two main "competitors" - 608 and r188. The balls in the R188 bearing create a “rolling effect”, which negatively affects the rotational stability. If a smooth “running” is a priority, then choose a 608 brand bearing.
To increase the rotation time of the hand spinner, the central bearing should be compact, and the body of the device should be heavy enough. To do this, it is best to purchase anti-stress “turntables” with a hybrid or ceramic bearing of the R188 brand. Spinner bearing size is 12.7mm. But 608 is almost twice as large - 22 mm. It takes up a lot more space. Because of this, the body of the fidget loses weight, and the “turntable” itself, even with a strong click, rotates for no more than 2 minutes.
submitted by
Do you want to buy a spinner, but it is not for sale in your city? We will tell you how to make a do-it-yourself spinner without a bearing! Recently, an unusually large number of newfangled toys began to appear. They are great for kids and adults alike, but sometimes finding a store that can sell you this new-fangled accessory is very difficult. Let's talk about spinners.
This toy entered the trend relatively recently and just flooded the Internet. It is impossible to buy it in some cities, as there are no retail stores, so you have to order it via the Internet.
But why spend money when you can do it yourself? Many are wondering how to make a spinner without using a bearing, today we will help you with this.
What is a spinner
The word "spin" is translated from English as "rotation". By and large, the toy is a rotating body that moves around its axis when energy is imparted to it. You can get a spinner without bearings, but it will not have the required rotation speed.
A standard spinner consists of three petals, in the center of each there is a bearing. It is worth noting that the mass of each petal must be the same, as well as the shape, otherwise there will be no balance and rotation will stop very quickly.
What's the catch?
In our free time, in anticipation of something, when we think, we always take something in our hands in order to somehow entertain or calm ourselves. For this you need ... a spinner. Of course, it cannot be called a child's toy, as it is an accessory for psychological and emotional relief.
How to make a do-it-yourself spinner
First, we will consider the main master classes, and later in the article we have prepared for you a simple instruction for making a spinner without a bearing!
Making such a toy is quite simple, you just need to thoroughly study the design and details of the spinner:
- a housing that includes a bearing and a plug;
- petals, in which bearings are also built;
- additional plugs.
The most important part of the toy is the bearings, it is on them that the efficiency of rotation, the number of revolutions and much more depends. Plugs are needed to hide the working mechanism of the bearing and conveniently hold the spinner itself. The parts are very simple and easily made using improvised means.
Manufacturing process
First, consider the model with bearings. For this we need:
- cardboard
- 4 bearings
- knife or scissors
- First, we draw a drawing of the future model of your spinner.
- We put the sketch on the cardboard and carefully cut along the edges.
- It is necessary to clearly highlight and mark the places for the bearings, for this, use a compass.
- Each petal should be symmetrical to the other.
- We cut out the holes for the moving elements with scissors and smooth them a little with sandpaper.
- They must be made in such a way that the bearing fits snugly into the hole.
Next, insert the bearings into the holes obtained and fill the edges with plenty of glue. In this case, it is best to use construction glue, which is used for gluing various decorated parts.
It must be applied carefully so that nothing gets into the bearing.
There is one well-known method, which will be discussed further.
wooden spinner
Making a wooden spinner is a more complicated option, but it is also the most reliable. Using a jigsaw and a special construction tool, you can make a housing into which, by analogy, you insert bearings and fix with glue. In each case, you can paint your spinner in the appropriate color.
- First, we select wood. It is best to use plywood, as it is the easiest to process. A sketch of the case can be found on the Internet, after which we transfer it to the workpiece. Using a jigsaw, we cut out the body.
- Next, you need to sand everything.
- Drill holes for bearings
- The thickness of the plywood must match the thickness of the bearing, otherwise nothing will work.
Spinner without bearings
Many people are wondering how to make a do-it-yourself spinner without a bearing and at minimal cost. The most common option will be presented below. The easiest and fastest way to make a spinner is from plastic bottle caps. This is a very simple way that no one knows about (except you).
For this we need:
- three bottle caps of the same size and weight;
- drill with a drill;
- ball pen;
- glue.
You need to do everything in a certain sequence:
- We glue the sides of the three covers. It turns out some kind of spinner without bearings.
- Next, in the central cover, we make a hole for the core of a ballpoint pen. In this case, the diameter of the drill and the rod must be the same.
- We cut off a few centimeters from the rod and insert it into the resulting hole.
In such an easy way, a spinner is made with your own hands, which can be rotated as much as you like without a bearing.
Making such a toy is very simple if you know or at least have an idea how the spinner works. In any case, you can always replace the covers with any other parts of the same shape and size. Everything is very simple.
Harm from using this accessory
Having figured out how to make a do-it-yourself spinner without a bearing, you can talk about the negative consequences of using it. You must strictly follow the safety precautions so as not to cause yourself any harm.
A factory-made spinner is completely safe, but the one you make yourself is not always. It is necessary to carefully process the surfaces, securely fasten the bearings and use it only for its intended purpose.
Do not leave children unsupervised!
Spinner is rapidly conquering the world. Millions of people from all over the world spin and toss this toy at work, in traffic jams, at home, on a walk, in line, etc. Spinner is a powerful and at the same time very simple and affordable anti-stress, which helps to get rid of tension and relax without attracting attention. The spinner became so popular that people began to do various tricks with it. This toy is loved by everyone from young to old: it is played by both preschoolers and big bosses in modern offices.
Spinner is an affordable thing. If at first they could only be found online, today they are sold literally on every corner, and there are also very budget options. However, homemade spinners are not inferior in popularity to ready-made options: Web users are actively looking for how to make a do-it-yourself spinner at home. And this is easy to explain: homemade spinners are unique, made from improvised materials, and their manufacture is also a kind of anti-stress.
We offer you several options for making this accessory. The first is the most time-consuming, the rest are a little easier. Choose the one that seems most understandable to you and you like the most.
Option one: difficult, but interesting
We will use really only improvised means. We will need:
- wooden ice cream sticks (20 pieces);
- metal or ceramic bearing (if you want the spinner to spin easier and longer, opt for the latter) size 8*22*7;
- 50-kopeck coins (make a hole in its center with an awl) (12 pieces);
- nuts and bolts, small in size and diameter (4 pieces each);
- buttons from jeans or jeans (or the simplest pushpins) (2 pieces);
- glue;
- sandpaper;
- paint (it is more convenient to take aerosol).
How to make a spinner?
Step 1: Preparation
We take two wooden sticks and cut each into two equal parts (along). That is, at the output of two sticks we already have four.
Now we take five whole sticks, press them tightly against each other and apply a layer of glue on top. We put the second layer of sticks on top: put four whole ones in the center, and put the previously cut sticks along the edges. We cover with a layer of glue and them. The third layer will consist of five whole sticks (like the first one). The fourth and last layer is a repetition of the second.
At the output, we have a base consisting of four layers of sticks glued together.
Step 2: Basic work
Choose the size of the spinner for you. We will tell you on the example of a 9 * 9 square, but the proportions can be freely changed.
Make marks on the workpiece and cut out a square (say, 9 cm).
Now inside the square we draw an equilateral triangle. To do this, divide one of the sides of our square in half and draw two 9 cm segments from this point, and then connect the ends.
Then divide each side of the triangle exactly in half and make serifs. Connect each notch to the opposite vertex. The intersection point of these segments (they are called medians) is the center of the spinner, in which we will place the bearing. Outline it with a pencil.
On the same segments, make notches at a distance of 2.5 cm from each vertex. Place a coin in the center of each of them (a hole is needed to align the hole with the serif and not go astray) and circle it with a pencil.
Using an awl or a sharp knife, dig holes inside the traced outlines. And then loosen them to cut even holes. You can press the bearing and the coin into the workpiece (but carefully so that the glued layers do not separate).
Cut out a triangle from the workpiece. Now we make two-centimeter serifs in the center of each of its sides. Like this:
The notch height at the median is 7 mm. Cut out these side triangles.
Step 3: Polishing
We take sandpaper and sand the surface of the future spinner. We walk around the edges. We paint the workpiece on both sides and leave to dry.
Step 4: Loads
We glue four coins together. We will have 3 stacks that we will insert into our holes in the spinner. Place the bearing in the center.
To make it easier to turn it, we place the previously prepared buttons or buttons in the center of the bearing and glue them. The finished product can be varnished.
Tip: if you own a jigsaw and a drill, take note of the diagrams from our instructions and make the spinner body not from ice cream sticks, but from an ordinary wooden panel. Then just sand your workpiece with sandpaper, paint and varnish.
Ready!
Option two: the easiest
With the help of superglue, glue gun or cold welding, we connect three or more bearings together. A video tutorial on making a spinner at home is below.
Option three: energy-intensive
It is most reliable to connect the bearings not just with glue, but also with a housing. For this, ordinary screeds are suitable, as well as wooden (as in the first method), plastic and metal cases. How to make them, see the next master class.
Option four: for cyclists
If you have an old bicycle chain, this DIY spinner is for you. True, you will have to work hard to make this popular toy. We lay the chain in a special way, fasten it with a tie, fix it, put the bearing in the center. Watch the video for detailed step by step instructions.
Option five: if you don’t have cutting tools, but you still want to make a spinner
A paper or cardboard spinner is also a great option for this toy. It will spin no worse! We take cardboard and a compass, cut out 4 circles of equal diameter from it (determine the size of the spinner for yourself, it doesn’t matter), glue them together. Take bright cardboard or paper to make the toy more attractive and please you not only with its properties, but also with its appearance.
Make holes for bearings slightly smaller than the diameter of the bearings themselves. This is necessary so that they sit tightly and do not slip out when you twist your toy. Learn more about making such a spinner in this video.
Option six: if there are no bearings, but the spinner is still very necessary
If you do not have bearings, a spinner can be made from the simplest material that is easy to get - from plastic caps. We need six pieces (take colored ones to make the toy look prettier and more interesting) and a toothpick or pen rod.
Let's see how to make a bearing from plastic caps.
Bonus
The video tutorial below shows three of the easiest ways to make a spinner at home. They all repeat the last three instructions in one way or another (No. 4, 5 and 6), but in this video you will also find some important tips for making the popular anti-stress toy.
Choose the method that seems most interesting and understandable to you. It is quite possible to make a spinner with your own hands in 2-3 minutes, or you can get confused and make a toy in a more time-consuming way. The result will directly depend on your efforts. However, no matter which method you choose, at the end you will definitely get a cool anti-stress toy, which is so popular today.
Views: 5 951
The spinner toy, known as a spinner or hand spinner - anti-stress, has conquered the planet. Fascinating spinning and even glow is now in trend! Let's make a hand spinner ourselves without bearings and complex parts? OK!
In a world of stress and boredom, something amazing has finally happened. Spinner toys have arrived! They temptingly look at us from the windows of online and offline stores, beckon, hypnotize. But you can also design such a toy yourself! Do you want to know how to make a do-it-yourself spinner without bearings from what is in every home? Then you are on the right track!
Do-it-yourself fashionable spinner toy
In every person lies an inventor and an engineering genius. It's time to wake him up! This is where all great discoveries begin. Of course, it is useful to know that a man-made hand spinner (hand spinner) can not only distract from stress, but also become a tool for original tricks.
Hand spinner can be easily created from ordinary caps and coins
Can you imagine what a mesmerizing spectacle you can create if you organize a spinner flash mob? But now is not about that. First you need to make a hand spinner, and you will need these simple items:
- colored plastic bottle caps
- ballpoint pen refill
- hot glue
- coins
- large paperclip
Tools for work:
- thermal gun
- sharp knife
- wire cutters
Is everything at hand? Then let's get to work right away! See how to make a do-it-yourself spinner from a photo. It's very simple, so you're sure to get it right.
How to make a spinner without a bearing: photo step by step
To get started, choose a convenient place and take care of the order. After all, hot glue can ruin not only the upholstery, any surfaces, but also the toy itself with unnecessary objects stuck to it, and with it your mood. This cannot be allowed! So, we are in place, everything superfluous has been removed, the surface is covered with oilcloth, all the tools are at hand. It started!
- Make a rounded hole in the center of the first cover with an awl. It will become the basis for the rotating elements of the hand spinner.
- Cut the empty ballpoint pen refill long enough to secure the side covers.
- Fix the rod in the hole on both sides with hot glue.
- Carefully cut off the excess parts of the sides from the second and third covers, as in the photo. Save your fingers! They will still serve you.
- Bend the paper clip and use wire cutters to give the desired shape. You can use any strong and rigid metal rod of the same diameter instead of a paper clip.
- To make a spinner without a bearing, glue the metal rod on the existing two parts with glue, after stringing the base on it. Do not spare glue so that the spinner toy is solid and durable.
- Then everything is simple: glue the covers of bright colors to the base of the rotation.
- And to make the whole structure heavier, you need to add coins to the fidget spinner. By gluing the coins to the lids, you will get the desired effect when the toy is launched.
Bearing spinner
The basic rules for manufacturing an actual turntable are: central bearing; radially arranged weighting blades.
With a certain skill, you can make a spinner based on four bearings. Buy them at a sports store that sells roller consumables.
Prepare the center of the toy: take out the anthers on the sides with a knife and place the part in the solvent for 3-5 minutes. To get rid of grease, clean the bearing with a toothbrush and dry thoroughly with a cloth.
Attach the blades to the prepared center with superglue. If you try, you will be able to make a spinner even better than a store spinner! Decorate it creatively, for example, glue it with a colored cord.
How to make a spinner without a bearing
It is very easy to make a spinner from four plastic bottle caps of the same size. The future blades of the gadget will serve as counterweights, so fill them with plasticine and fill them with a glue gun.
Make a hole in the center of the fourth cover with a red-hot knitting needle. This detail is the middle of a homemade spinner. Glue three blades to it. After that, complete the axis of the spinner.
Make two pieces of the glue gun rod, each about a centimeter long. Place the center of the spinner on the half of the toothpick, put pieces of glue sticks on both sides of the axis. Color the gadget with acrylic paints.
You can make the center of the spinner a bearing, which is attached to a form pre-cut from plywood. Excellent blades will be obtained from coins glued together.
On the Internet you can find instructions, a cardboard spinner, using the origami technique. To create a collection of unique gadgets, show your imagination and try to invent new ways to make a spinner toy.
Interesting facts about the spinner
- The invention of the spinner is credited to Ohio chemical engineer Katherine Hettinger, who made a soothing pinwheel for her sick daughter in the 1990s.
- In its current form, the spinner was patented by Scott McCoskery. The metal pinwheel, which he invented in 2014, helped him cope with business meeting anxiety, he says.
- The wave of popularity of the spinner came in 2017. Some American schools even had to ban the gadget because it distracted students from class.
- In pursuit of the current trend, Kim Kardashian released golden fidget spinners in 2017, and with a Novosibirsk spinner made from Zhiguli, she collected more than one hundred thousand views on YouTube.
- Experts say that the spinner develops fine motor skills, relieves stress and irritation, and helps to concentrate. The benefits of gadgets for patients with autism and ADHD are claimed.