How to paint tires for a flower bed. Do-it-yourself plot decor: flower beds made from tires

The desire to improve a summer cottage, transforming it into an attractive, cozy corner for comfortable relaxation, is quite natural. Flower arrangements, beloved by many gardeners, are an invariably popular element of landscape design in suburban areas. A worthy setting for such compositions is often flower beds made from tires, which are one of the easiest products to create and practical to use. Of course, you can purchase ready-made flowerpots in specialized stores. But flowerbeds made from tires created with one’s own hands are not only a beautiful and functional design element that gives exclusivity and uniqueness to the design of the site, it is, first of all, the pride of every summer resident.

How to choose the right tire?

It's great when it's possible to have a choice. When choosing between old tires from a domestic manufacturer and imported products, preference should be given to the latter. Imported waste tires have softer and thinner rubber, which is much easier to work with. If you choose between “summer” and “winter” tires, then the winter version is more suitable for work.

When deciding to create original flowerbeds from tires with your own hands, turning old waste tires into street vases of fancy shapes, you need to prepare the source material in advance and think about its design

In order to make a flowerbed from an old tire, it is advisable to choose wheels with maximum tread wear. The worn-out tread layer makes the product softer and makes it much easier to turn it inside out.

Tires contaminated with soil and sand must be cleaned. And the point is not even that it is more pleasant to work with a clean product. It’s just that when working with dirty tires, the blade of the knife and file becomes dull much faster.

Step-by-step manufacturing example

Before you start making a flowerbed from a tire, you need to think about how the finished product will look: a bowl with smooth edges, a flowerpot with a wavy cut line, or a flowerbed in the shape of a large flower bordered by petals or fringe.

The drawing, along the contour of which the cutting line will be drawn, is applied to the side of the product

When thinking about the shape of the cut, you need to be guided by the fact that the result should be a design based on the “pan-lid” principle: a deep lower part and a cut off upper part. The contour can be easily drawn along the entire circumference with a felt-tip pen or chalk.

The cut edges, made with wavy lines or shaped like teeth and fringe, look interesting.

Stage #2 – cutting along the contour

When thinking about how to make a flowerbed from an old wheel, designed in the shape of a large flower, you need to cut out petals along the edge of the product. The size of each petal should not exceed 10-12 cm. Otherwise, when turning the tire out in these places, the rubber simply will not bend, and the flowerbed will not take an even round shape.

You can use a shoe knife to cut the wheel. A well-honed tool will significantly speed up your work

You can make the cutting process easier by using liquid soap to lubricate the knife blade.

It's great if you have a jigsaw on hand. Using a jigsaw, it is convenient and quick to perform figured cutting.

Labor mechanization is described in detail in the video:

After cutting the tire along the contour, along the tread grooves it is necessary to make longitudinal cuts at a distance of 5-10 cm.

Stage #3 - turning the tire out

When creating a flowerbed on a leg out of wheels with your own hands, the first thing you need to do is turn the rubber tire inside out. For many craftsmen, this stage of work becomes a real stumbling block. The process of turning out the rubber itself is quite a labor-intensive process.

In order to cut the metal cord, you need to use a grinder to make several cuts along the outside. Cut through the rubber smoothly. The contact of the disk with the cord can be judged by the plaque formed on the surface of the product and the white smoke emitted. Make the cuts at an equidistant distance of 15-20 cm.

Having completed the preparatory work, you can begin to turn the tire out. Before you start turning the tire for your flower bed inside out, we would like to tell you one secret: it is enough to turn at least a small piece of the tire inside out, and the work will go like clockwork.

The turning process is clearly shown in the video:

The flowerbed made from old wheels is ready, you can start decorating it.

Finished product design

Creating and growing flower beds in black forms is not entirely aesthetically pleasing. Therefore, once the flowerbed has been given the desired shape, you can begin to decorate it. Until the outer surface of the inverted flowerpot is covered with a layer of dust, it is advisable to paint it.

Painting is the easiest and most affordable way to decorate a black rubber flower bed

Oil, enamel and nitro paints are excellent for painting rubber products. The paint lays on a clean rubber surface in an even layer and lasts for quite a long time. You can also use leftover car paint to paint your flower bed. Using an aerosol can, the job can be completed in just a few minutes.

Using light-colored colors to decorate a flower bed will prevent overheating of the soil inside the container.

The combination of colors looks interesting when the base of the flowerbed is decorated in one color, and the cloves or petals are in another.

Most craftsmen paint the rubber flowerbed only from the outside. But still, to give the container a more attractive appearance, it is advisable to slightly capture the upper part of the inner surface of the product.

When designing a flowerbed, you can give complete freedom to your imagination. Glass aquarium pebbles glued to the petals of a flower bed will create the illusion of dew drops.

If you want to further decorate the flowerbed, you can apply an ornament of a different color over a plain layer of paint. But you shouldn’t be too zealous: if the flowers grow wildly, the flowerbed pattern may be completely obscured by hanging or creeping plants.

Minimum costs, a little free time - and a chic decoration for arranging a suburban area is ready

Such a flower bed will be a worthy addition to the interior and an element of the landscape design of the dacha. All that remains is to fill the container with a layer of soil and plant your favorite flowers.

Modern landscape design is characterized by original and bold solutions. These include original flower beds made with your own hands from tires, which look very attractive and do not take up much space. The desire to decorate your site and create interesting flower arrangements is quite natural, and a unique installation is also a source of pride for the creator.

Flower beds made from tires - simple and tasteful

You don’t have to be a top-class professional to create flower beds from tires. First, they decide on the location of the future composition and make a sketch of the structure. In a small area, it is appropriate to place a single form in the form of a cute frog, a graceful swan, a fairy-tale carriage or a bright parrot, as in the photographs of the flower beds below.

A spacious lawn requires larger installations. For example, multi-tiered flower beds made from car tires or vertical volumetric structures, as in the following photos.

Flowerbeds can come in a variety of shapes:

Low and high.
Round and oval.
Multi-tiered.
In the form of animal figures, objects and flowers.

After the location and shape have been decided, materials and tools are prepared. For work, in addition to tires, a sharp knife and paint, the following may be useful:

Stones of different sizes.
Metal grid.
Technical marble.
Remains of building materials.
Decorative stone for aquarium, etc.

When everything is ready, you can start working.

Making flower beds from tires

The simplest is the flower shape. The higher the tire, the larger it will be. Before you make a flower bed out of a tire, you need to choose a tire. It is better to take a used imported product with softer and thinner “winter” tires. It's easier to work with her. The tire is first cleaned, washed and dried. Then the lines of the future petals are drawn in a contrasting color, the upper part is cut out and removed, as in the photo of the flower beds below.

For further decoration, enamel, oil or nitro paint is used. On a clean and dry rubber surface they are distributed evenly and last a long time. You can also use car paint or spray paint to paint your tire bed. It is better to choose light shades of color so that the roots of future plants do not overheat. The design of pure white tires looks very elegant.

Or a multi-tiered flowerbed of tires decorated with light stones of different sizes.

The combination of different colors looks interesting.

Or, conversely, a monochromatic composition.

When painting tires, you need to slightly capture the upper part of the surface from the inside to give a more aesthetic appearance.

Before painting, you need to carefully consider how the tires with blossoming plants will look. If the flowers are supposed to be bright and contrasting, then the tire should be monochromatic and modest. And, conversely, with an intricately shaped flower bed, the flowers are planted small and low.

A flowerpot will look interesting when the color of the plants echoes the shades of the container. If desired, you can glue oval-shaped glass aquarium pebbles to the flower-shaped flower bed - they will create the illusion of dew.

Multi-tiered flower bed

This installation will require several tires of different or the same diameter. The middle is cut out of them to make rings and the structure is assembled:

Install the largest tire first.
The bottom is lined with sand and crushed stone. Fertile soil is poured on top.
A smaller tire with the same filling is centered on top.
The number of tiers depends on the size of the elements.
Flowers or useful plants (strawberries) are planted in the gaps between the rings.

Flowerbed - tire swan

An ordinary tire painted white can become a real masterpiece. For a swan figurine, the inner part is not cut out of it so that its weight can hold the shape.

30-40 mm are retreated from the edge of the tread and two rounded cuts are made parallel to the circle on opposite sides on two-thirds of the entire surface. The narrow middle part will make the neck, and the wide side parts will make the wings. The middle part is cut off on one side and a head is formed at its end. Then the tire is turned out and the wings appear. They are finished with cuts of varying lengths that imitate feathers. The wings can be bent in any way - the angle of inclination can be any. All that remains is to paint the bird white, let it dry and you can plant flowers, for example, forget-me-nots.

Video on how to properly cut a tire for a flower bed

Many people believe that only an experienced specialist can develop a beautiful landscape design. But practice shows that such a point of view has nothing to do with reality. Anyone can make a garden or personal plot - if only they had the corresponding desire.

Landscape Design Basics

In order for a dacha or local area to look decent, often neither high professionalism nor significant financial costs are required. Anything can be used: broken bricks, stones, plastic bottles, old watering cans and much more.

Tire flowerbed

For example, an alpine slide, which is the object of dreams of many owners of suburban areas, can easily be built without the involvement of specialists. The most important thing is not to be afraid to experiment and boldly combine different items and objects.

Interesting. Often old junk, which, it would seem, is time to throw away, can do a good job in decorating the territory.

So, for example, an old rickety chair will make a beautiful stand for a flowerpot. An old chest of drawers, if painted and decorated accordingly, can decorate any blank wall by planting bright flowers in its drawers.

More complex structures can be made from scrap materials, for example, with a metal rod and flower pots on hand, you can build a very interesting vertical flower bed.

Among domestic gardeners and owners of suburban areas, flower beds made from tires are in fairly high demand. They will be discussed further.

Types of flower beds made from tires

To create flower beds from tires with your own hands, you do not need any special experience or knowledge. The most important thing is to have the necessary tools at hand and know the basic information.

According to the type of design, tire flower beds are:

low;
tall;
single-tier;
multi-tiered;
curly;
hanging;
round.

Round flower beds made from wheels are the easiest option to implement. All that is required to organize a flower garden is to take tires, paint them in any colors, fill them with soil and plant the plants.

Interesting. To get an interesting composition from a material such as a tire, you can paint the wheel material in bright colors and, stacking it on top of each other, form high flower beds.

As for multi-level structures, they are created from tires of various diameters. They are placed on top of each other according to the principle of a toy pyramid (in order of decreasing size) and filled with soil. This design is perfect for planting hanging plants.

Multi-level tire construction

Hanging flower beds made from tires can be attached in different ways: to a pipe, with chains or a rope to a tree branch, etc. Just first remember to cover the bottom of the improvised flowerpot with some material.

Step by step instructions

Before you start making a flower bed from tires, you should decide on the dimensions and design.

Flowerbed in the shape of a flower

DIY flower beds made from tires look very stylish. To work, you will need a tire, a sharp knife capable of cutting thick rubber, and a marker (or chalk).

Flowerbeds in the shape of a flower The manufacturing work is carried out as follows:

Marker marks the cut points.
Cut the tire around the circumference in the shape of zigzag petals (oval, semicircular or triangular).
The tire is turned over and, moving the knife along the thickening, a circle is cut out from the back of the tire.
Along the circumference inside the tire, transverse cuts are made at a distance of 20 to 25 cm from one another, starting from the cut edge to the end of the tread.
All you have to do is turn the tire out, and the flowerbed structure is ready.

Flowerbed in the shape of a flower

Then you need to paint the product a beautiful color, fill it with soil and plant flowers. Oil paint is best. Other types of paint may peel.

Flowerpot from an old wheel

Another interesting master class that will be useful is dedicated to making a stylish garden vase from a worn out wheel. To work, you need to prepare a tire that still has a disk, a knife and a marker. Then proceed according to the following scheme:

A zigzag line is marked along the circumference of the tire, along which it will then be necessary to cut.
They cut the tire. To make cutting easier, it is recommended to periodically dip the knife in machine oil.
Turn the tire inside out. It is better to turn it out together and in parts.
The flowerpot is ready. All that remains is the same painting work.

Important! Before pouring soil into such a vase, you must remember to put a gasket on the bottom, in which small holes should be provided to remove excess water after watering.

Daisy flower bed made from tires

This is another simple and interesting option on how to quickly make a flower bed in the form of daisies from a wheel. To work, you will need several tires and a sharp knife. In general, the work will take no more than half an hour. The step-by-step process is as follows:

All tires are cut in half.
A flower-shaped fence is formed.
They fill up the soil and plant the plants.

Form the chamomile core from flowers. Alternatively, it can be in the shape of a circle, made of a material such as a plastic bottle (bottoms up) or stone.

Daisy flower bed made from tires

If you approach the process of creating flower beds from tires creatively, original ideas will not keep you waiting. Answers to the questions: is it worth using additional plastic material, how and with what to paint the wheels for a flower bed, and what to ultimately plant in a flower garden, will be found along the way.

Flowerpot parrot

To create an original flowerpot in the shape of a parrot from an old wheel, you will need the following materials:

tire with shallow radial tread;
a strip of iron for a clamp;
washers, nut, bolt;
spanners;
drill.

Flowerpot parrot

The work is performed in the following order:

Using a knife, make symmetrical cuts in the tire 2/3 along the bead ring.
The side part and tread are cut at a distance of 1/3. On the larger side, the side part is separated by means of a triangular cutout.
The tire is turned inside out.
The bird's beak is cut out from the side.
A smaller part of the tire is cut along its entire length (the cut should be slightly larger than the size of the future beak).
Using a clamp, insert the beak and compress the halves.
Drill a hole with a drill.
The head halves are tightened with washers, nuts and bolts. (To make the head narrower than the body, part of the tire must be cut off).
A tail is cut out on the larger side of the tire.
Paint the workpiece.
A clamp is made from an iron strip, which is used to tighten the sides of the flowerpot (alternatively, an ordinary rope can be used).
Color the parrot completely.
Hang the pots on a rope or screw them with wire to a horizontal structure.

How to turn a tire out

It will take some effort to turn the tire inside out. To make the work easier, it is recommended to make large cuts - up to the tread. First, turn one side out, then, slightly flattening the tire into an oval, do this completely.

If you still don’t have enough strength, you should cut the part of the flowerbed opposite the petals in a circle to remove the steel cord. True, in this case there is a risk that the structure will not hold its shape well enough.

Tire work

How to cut a tire

You will need a sharp knife to cut the tire. First, a small hole is made in the tire. Then a cutting tool is inserted into it and the material is cut according to pre-made markings. The knife should be periodically dipped in water or machine oil. This will greatly simplify the task.

How to paint wheels for a flowerbed

When the structure is ready, all that remains is to paint it. To do this, the surface is completely degreased (for example, with acetone or white spirit) and allowed to dry.

The surface can be additionally primed, but this condition is not mandatory, since even without this the paint adheres to the rubber quite well. The painting process itself is no different from similar work at another facility.

Planting flowers and care rules

Having figured out the question of how to make a tire from a car wheel and how to cut and cover everything correctly, it’s time to understand what is best to plant in a flowerbed made of tires. There are, of course, no clear instructions as to which flower is best to place in flower beds made from DIY tires.

Tire with flowers

Nasturtiums look no less bright. But when planting this flower in flower beds made from tires, you should remember that the crop does not tolerate transplantation very well. Accordingly, nasturtium should be placed in a permanent place of growth in the form of swollen seeds or ready-made seedlings in peat cups.

In addition, you can plant marigolds, verbena, violas and other not too fancy flowers.

It is allowed to plant perennials in homemade flowerpots. These can be chrysanthemums, carnations, daisies, decorative onions and much more.

The main condition is that flowers planted in tires must be unpretentious and require minimal care.

No matter how interesting the idea is, and no matter what type of flowers are planted in the impromptu flower garden, the structure itself should be placed in such a way that access to it remains free. This will allow the plants to be properly cared for. Only in this case will the use of tires as flower beds be justified.

As for caring for flowers, it largely depends on what exactly is planted, and does not differ from the manipulations performed with a similar plant planted in open ground or a flower pot.

Concluding the conversation about how you can make a flowerbed out of a wheel, it is worth noting that such a constructive solution within the framework of creating landscape design has a number of undoubted advantages:

durability of the flower bed;
good tolerance to temperature changes;
almost zero financial costs;
high level of aesthetics.

Rubber is a very pliable material, and the question should not be how to make a flower bed from a tire (especially since it is very easy), but which version of the flower bed from the many is best to make.

A person’s desire to decorate the territory of his dacha, to create a wonderful, cozy environment there using things at hand, contributed to the emergence of many design ideas.

The original material for implementing extraordinary ideas is old car tires.

Entertaining crafts made from tires for the garden will decorate both flower beds and playgrounds, as well as paths. Tires and tires can be used not only to create elements of garden decor, but also for practical purposes - they can be used to build a swimming pool, furniture, swings, sandbox, and bicycle parking.

The photo below shows extraordinary ideas for crafts made from tires.

Idea No. 1. Making a flower bed from tires

The easiest way is to take an unnecessary tire, fill it with soil and plant plants. Of course, this will not be a unique decorative element of garden design.

To fix everything, take bright paints (acrylic or oil-based) and paint the tires. Next, we place them on top of each other, resulting in a multi-tiered flower bed.

An original solution would be a vertically located flower bed, folded in the shape of a pyramid. We fill the soil inside and plant climbing flowers - petunias or strawberries. On top you can place a pot with a single plant.

You can also make a hanging flowerbed from tires. To do this, you will need a steel chain - it will need to be attached to the tire and the entire structure will need to be suspended from a tree.

To prevent the soil from spilling, cover the bottom of the tire with a thick sheet of rubber or other suitable material.

An unusual solution would be to make flower beds in the form of a teapot and cups. All you need is a few tires and some scrap metal tape and pipes.

Idea No. 2. Tire figures

Another type of crafts made from tires for the garden are a variety of unusual and intricate figures made from tires. They will enliven your garden and improve the mood of everyone in the household.

The figure of a swan is very popular. To make it you will need a tire without metal cord. It must be pre-marked.

For cutting, use a well-sharpened knife. Secure the swan neck with a metal rod. The final step is to coat the resulting product with white or black paint (depending on what kind of swan you want - white or black).

It’s enough to simply create a funny horse, zebra or giraffe. Such figures will require a medium-sized wooden beam to be installed in the ground along with a tire.

Crafts should be painted in colors corresponding to a particular representative of the fauna.

It's easy to turn old tires and cans into a frog or a cute turtle. A little imagination will help you make interesting and unusual installations.

Note!

Idea No. 3. Country furniture

Furniture made from tires will look great in the garden.

They can be made in a variety of styles and using different upholstery materials, ranging from leather and textiles to wicker and wire.

The tires will make a comfortable chair in which it will be wonderful to relax in the lap of nature. To do this, we take tires and wrap them with intertwined straps and ribbons. It won't take much time, and the result will be entertaining.

You can make garden furniture from different-sized tires of medium and low hardness.

Tires make beautiful tables, ottomans, armchairs, chandeliers, fountains and washbasins.

Note!

Idea No. 4. Tire swing

Swings are an integral part of any playground. Tire swings are safer than those made of wood or metal. They are quite simple to make.

You will need:

strong horizontal branch;
sharp knife and jigsaw;
chain or strong rope;
tire.

We tie the end of the rope into a loop; the knots must be strong and reliable. We throw the loop over the branch, pass the rest of the rope through it and tighten it. We place the tires perpendicular to the ground.

We pass the rope through them and fasten it at a height of approximately 0.9 m from the earth's surface. The swing is ready!

Idea No. 5. Tire track

Paths created from waste tires, or rather from their tread part, look unusual and original.

We bring to your attention a selection of photos of various crafts made from tires.

Note!

Tires are a universal material for creating a wide variety of things with your own hands.

Numerous master classes on crafts made from tires can be easily found on the Internet. Therefore, if you have unnecessary old tires lying around, feel free to put them to work, creating memorable elements of garden decor.

Photos of crafts made from tires

Almost every summer resident strives to decorate his plot in the most interesting way. Various varieties of flowers and plants and original landscape design ideas are used. And for this it is not at all necessary to use expensive materials and spend a lot of time. You can decorate the area with your own hands using available materials. For example, with the help of tires, you can stylishly and very funly diversify an empty space.

For many years, summer residents and gardeners have been using car tires as decoration for their gardens. This method of decoration has many advantages:

Old tires can be purchased very profitably or even taken from someone for free. Surely a couple of your friends have unwanted wheels lying around.
This product is not in any danger. For example, moisture, bacteria, fungi are not able to have a negative effect on the product. And if the paint fades and cracks over time, it would be a good idea to update it.
With the help of car tires it is possible to bring to life the most daring design ideas.
The tire structure is compact, and if necessary, it can be moved to another place without any problems.

How to cut flower beds from tires: step-by-step instructions

Making a beautiful flower bed from car tires with your own hands is simple and profitable, you just need to put in a little effort. It is important to follow the sequence and recommendations when performing such a decorative element. Below you can learn step-by-step instructions for making garden decorations from car wheels.

Select forms

The first step, of course, is to choose the idea and shape of your decoration. And there are many ideas - in the form of a flower, a well, a tea cup and much more. When determining the final option, be guided by your taste and the characteristics of the garden.

Choose the right tires

Of course, the ability to choose is always a plus. Therefore, it is better to select products with the greatest tread wear because... the worn-out tread layer softens the tires and makes them more suitable for making fancy shapes.

If you are faced with a choice - old car tires of Russian or foreign production, then it is better to go with the latter option. The thing is that they have thinner, softer rubber, from which it is more convenient to make figures.

And if you have to choose between winter or summer car tires, it is better to choose winter tires.

Draw cut lines

To draw the cut line, you need to determine what shape you want to make - a flower with sharp or smooth edges, a large bowl, a vase with wavy lines, or even a swan. It is advisable to apply the outline with a felt-tip pen or chalk.

The photo below shows an example of a contour:

Note! If you just want to beautifully color the tires for the flower garden, then you do not need to draw cut lines or cut them out.

Cut along the contour

To cut a beautiful flower bed out of tires, it is important to do everything carefully. This will help not only to obtain a non-standard product, but also to avoid injury. It is advisable to use a sharp knife or jigsaw if you have one. In the video below you can see how the cutting stage goes.

Video: how to make a flowerbed from a tire using a knife in 5 minutes.

Video: how to cut and turn out a tire using a jigsaw.

Design the finished product

The final step in making a flowerbed from old tires with your own hands is the design, because black tires in the garden will look depressing and not aesthetically pleasing.

To paint old car tires for flower beds, it is recommended to use enamel, oil, nitro paints, as well as car paint. Their advantages include long-lasting coverage and ease of application.

There are absolutely no boundaries when decorating a product: you can use only one color or combine several of your favorite colors. It’s not trivial to make beautiful drawings and ornaments.

Video: flower beds made from tires and tires that you can make at your dacha with your own hands.

Ideas for flower beds made from old tires

Well

A flower garden made from a car tire in the form of a flower bed is an ideal solution for those who want to achieve a feeling of rustic coziness in their plot. In addition, the well will highlight the beauty of your flowers.

Instructions on how to make a flowerbed in the form of a well from rubber tires:

Take three old tires of the same size.
Use a sharp knife to make a slot on the opposite side of each tire. This action will help in the future to insert support posts for the roof of the well. But columns can also be made from the outside.
Lay the rubber tires on top of each other so that their sipes line up.
Insert supports, such as beams or beams, into the holes of the wheels. The support must be buried in the ground. However, the ground under the structure must be smooth for the well to be stable.
It is better to make the well roof as natural as possible, that is, similar to a real well roof - the structure will look even more beautiful and cozy. For this reason, the roof is best made from roofing materials.
It is necessary to install a roof support between the beams.
After this, boards, metal tiles, slate and other materials are attached to it. It is also not a sin to make a well cover using cut tires.
After that, start decorating - paint the well as you please.

Below you will find photos of a flower bed in the form of a tire well for inspiration and ideas:

Turtle

The turtle tire design is truly very beautiful. Thanks to its interesting appearance, it can literally revive any summer cottage and make it a little fabulous.

Tea cups

Tea cups made from rubber tires will look original in any garden. To make them yourself, just follow the simple step-by-step instructions:

Take two tires of different diameters.
Place them on top of each other - a smaller diameter wheel on the bottom and a wider wheel on top.
Fasten them with self-tapping screws.
To make the design more realistic, make a saucer out of rubber and a handle from scraps. The latter can also be attached with self-tapping screws.
There are several options for painting the cups: in one bright color, or to make the design as realistic as possible and paint it in one color, and then draw polka dots.

Video: flower beds made of tires and tires in the form of tea cups

Frog

It is clay frogs that very often decorate summer cottages. Green beauties fit perfectly into the garden setting. But frogs made from rubber tires will also look extraordinary.

Look how cute the cheerful little frogs look!

Flamingo

Birds of paradise flamingos now have the opportunity to live not only in exotic lands, but also in your garden! All you need to do is stock up on tires and pink paint. Look at the photos below to see what beautiful birds you can make from car tires:

Video: how to make a flamingo from car tires.

Crocodile

Dangerous predators in nature can become cute animals made from tires at your dacha. Green structures will look organic next to flowers, shrubs, and trees.

Photo gallery of ideas

In fact, there are a lot of ideas for creating decorations from tires for the garden and summer cottages. You can be inspired by ready-made ideas or come up with something of your own, very original and unforgettable. Therefore, we invite you to look at photographs with a variety of options for inspiration and new ideas:

Beautiful structures made from old car tires will add a unique charm to your garden, garden and summer cottage. They will not only delight you every time, but will also pleasantly surprise your guests.

In contact with