Creating a palm paradise on your own property is a simple and very exciting process in which you can also involve children. In this article we will try to give detailed description step-by-step instructions for creating a palm tree from plastic bottles with your own hands.
For this, we, of course, need bottles in brown and green tones. You can choose a different tone - a variety of shades will give your palm trees more natural look. You can also choose any bottle size from 1.5 to 2.5 liters.
Vote for the most successful, in your opinion, version of a palm tree made from plastic bottles (click on the picture to enlarge)
So, to create a palm tree trunk we need bottles brown shades. To do this, we use a knife to cut the bottles crosswise almost in half, but the lower part should remain slightly larger than the upper part, the one with the neck. At the same time, we don’t throw anything away - all the cut off parts will be useful to us.
The top half of the bottle must be cut into 8 equal parts to the point where the narrowing of the bottle begins. And then we give each of these parts the shape of petals, or triangles, which must be opened in the form of a flower, making a fold at the base. The lower parts of the bottles are cut in the same way, however, first you need to make a hole in the middle of each of them the size of the neck. This can be done using a hot knife.
Let's begin by describing the process of obtaining foliage. To do this, we take bottles of green shades. Using a knife, cut off the neck and the very bottom of the bottle, where it curves. Then, starting from the bottom, cut the bottle into 3-4, if possible, equal parts. The number of cuts will depend on the size of the bottles and the palm tree itself. Before reaching the top of the bottle by about 2-3 cm, we stop the cuts.
Then you need to bring the foliage into proper shape. To do this, slightly round the lower parts of the resulting petals, and closer to the neck, on the contrary, narrow them. Then we straighten them along one plane.
To form foliage, each of the petals must be cut on both sides, leaving 1.5 - 2 cm in the middle. The cuts must be made obliquely, in the direction from the rounded sides to the narrowed middle. To add splendor, we unbend each resulting strip of foliage in the sequence: down, skip, up, skip.
Can be used as a rod plastic pipe or an iron pin of small diameter so that all parts of our palm tree can be inserted onto the base. The height of the palm will depend on you and, of course, on the number of bottles used.
Assembling a palm tree goes like this: everything finished parts We collect the trunk with the neck down, from the very large bottles to small ones. When inserting the next part of the barrel, you need to rotate the petals so that they occupy the empty spaces of the previous part, i.e. in a checkerboard pattern. The very first part is attached to the pipe using tape.
Pay attention to this material -
School of practical people. Master class on making a beautiful and beautiful palm tree with your own hands from plastic bottles.
New technologies and innovations bring a lot of good things into people's lives, making them easier and more beautiful. But with this new thing, something bad also comes into our lives.
A plastic bottle is an example of the above. This thing was developed in 1941. The plastic bottle has taken the whole world by storm. She is extremely popular for a number of her positive qualities:
- cheap material,
- very technologically advanced,
- ease of use,
- can be reused for home purposes.
Unfortunately, the plastic bottle also brought bad moments:
- decomposition period under natural conditions is more than 100 years,
- during decomposition and combustion, hazardous and harmful substances are released.
Over the past summer season, our family has accumulated a lot of plastic bottles. In the fall, they began to think about where to throw them, how to take them to a landfill. The youngest daughter came up with a brilliant idea to leave the plastic bottles at home and make something beautiful and original.
Everyone liked my daughter's idea. We looked at a lot of crafts on the Internet. We settled on the idea of making a palm tree.
Stage No. 1
Collect as many plastic bottles as possible. The color is green (from under Sprite). The color is dark brown (from Kvass or Beer). Huge quantities are needed. Immediately ask neighbors and friends for help. They will certainly help you in difficult endeavors.
Stage No. 2
Think carefully about what height and size your palm trees will be, how many palm trees there will be, and where you will install them.
We personally first make one tall palm tree.
Stage No. 3
We tear off all stickers and product labels. Gently rinse dirty plastic bottles in hot water.
Stage No. 4
We sort plastic bottles. This will make it easier and more comfortable to work. We start with brown bottles. Let's put the green ones aside, don't let them interfere. We'll use them a little later.
Stage No. 5
Let's start making a powerful and reliable barrel. We take plastic brown bottles. Carefully cut off the bottoms of the bottles. Then take a drill with an attachment. We make holes on a hard surface in the center of the bottoms. We take the fittings. We string the blanks onto the reinforcement one by one.
Stage No. 6
We bring green bottles from the warehouse. We will use them to make the leaves of our exotic palm tree. For this procedure we will need sharp scissors and a knife. Carefully cut off the bottom of the plastic bottle. Throw it away. Cut the remaining part into long strips.
Stage No. 7
We mount and securely fasten the workpieces to iron fittings. The length of the fittings depends on the number of bottles and the size of the palm tree.
Stage No. 9
The final stage. We reliably install all structural elements. We securely fasten the iron fittings to each other. We invited our neighbor, a welder. Five minutes of work. Here she is. Our beautiful palm tree. We install securely finished design. Pour cement mortar into the hole, install the palm tree, and secure it with twine.
Our family decided that three gorgeous palm trees would soon grow in front of our house. We are in the Bahamas all year round. See photo No. 8. Our palm trees delight all our neighbors, make them stop all pedestrians and drivers, take pictures of the beauty and tell their friends about the miracle!!!
A hand-made palm tree does not require maintenance, but at the same time is an excellent interior decoration. The master class offers you the opportunity to create two versions of a palm tree - for the desktop and for the area near the house.
If you want to decorate your interior with exotic elements, then you can try to make a palm tree with your own hands, using one of the techniques presented in this master class.
To create your own simple option palm trees you will need the following materials:
Wire, the thickness and diameter of which will depend solely on your desire for the future size of the tree;
Pliers;
Sheets of paper with adhesive side;
Any material for wrapping a palm tree, here a simple pipe cleaner is used;
Make several pieces of wire of the desired length, their number should be about 8-10. The length of the wire is the height of your palm, so try to make it optimal for what you want. Attach a square of adhesive paper to one end of the wire, which will be palm leaves. Place future leaves on each wire.
Using scissors, give the squares the desired petal shape, making cuts in each of them that reach the wire.
Palm leaves must be joined together to form a tree. Now you should take a strip of pipe cleaner of any color to make it look more realistic, the most suitable would be a pipe cleaner Brown. Take all the wires with leaves in your hand and connect them using a winding brush. Once you reach the desired height of the palm, you can cut off the excess from the pipe cleaner. Leave one or two centimeters, this will later give the palm tree stability.
Set up the palm tree, giving the leaves the desired shape.
Make a palm tree with your own hands big size To place it in the yard of the house, you can use simple plastic bottles.
To do this, you need to collect green and brown plastic bottles, take a couple of iron rods and prepare a drill, as well as a knife and scissors.
First you need to make a trunk. From each bottle we cut off the bottom with a height of at least 20 cm. The edges should be cut into teeth and bent for clarity. This will allow you to obtain a scaly structure of the palm trunk. Also, in each bottle blank, you should drill a hole equal to the diameter of the iron rod; it will serve as the base.
Now we take the green bottles and cut them in half. Next, we cut the edges of each bottle according to the shape of the leaves. We leave the necks on one half, and drill holes for the twigs at the ends of the others.
The blanks are ready, it's time to start assembling the palm tree!
Attaching palm leaves is not as difficult as it may seem. It is necessary to take an elastic rod, quite rigid, but not thick. We insert the cut green bottles one into the other, neck to neck, and on the last bottle we leave a cork, which we drill and put on a rod; at the end the rod must be bent so that the leaves do not fall off.
The palm tree made from plastic bottles is ready!
A simpler option is also possible
A palm tree made from plastic bottles will take its rightful place on your personal plot and will please the eye at any time of the year. Manufacturing plastic wood– the task is not difficult, the main thing is to find a sufficient amount of material. We offer step-by-step instructions for beginners how to make a palm tree from plastic bottles.
Step by step tutorial: How to make a plastic palm tree
First you need to prepare the materials. You can use brown and green bottles or clear ones and then paint them. You will need:
- Plastic bottles of different sizes
- Wooden stick or reinforcement for the frame
- Thick rope or wire.
Conditionally palm making can be divided into three steps:
- Making palm branches
- Making a Tree Trunk
- Combining all parts into one tree.
Step 1 . To keep the leaves wide, use two-liter green bottles. To do this, cut off the bottom of the bottle and cut the bottle lengthwise into 7 pieces. Give each leaf a suitable shape and make a fringe. For one leaf you will need about 10-15 bottles. Connect them through the neck using rope or wire. You can make small cuts lengthwise into the bottles, then the leaves will turn out fluffier.
Step 2: To make the tree trunk you will need brown beer bottles. Now you have to cut off the neck and work with the lower half-bottom. Make triangular cuts on each bottle blank, then carefully bend the edges outward. In the center of the bottom you will have to scorch with heated metal rod a hole, the diameter of which depends on the diameter of the base for the frame. The number of bottles depends on the desired height for your tree. Insert them one in one on the frame, and you get a trunk.
Step 3. Now you can begin to fully assemble the tree. If you strung the leaves on a metal cable, you can simply weld them to the trunk. To prevent the palm tree from flying away, make a foundation and dig the stem-trunk deep. Try making a small palm tree first, and then plant some more plastic trees next to it.
Palm tree made from plastic bottles
Fantasize, then your tree will be unique, and the site will be the most beautiful. Involve family members in preparing preparations for the palm tree, then you will have an interesting time together. We hope that our article is about how to make a beginner palm tree made from plastic bottles was useful and your garden area will be significantly transformed.
Simple and in an inexpensive way You can renovate the area near your home or on the playground by making crafts from ordinary plastic bottles. With a little time and imagination, you can create from this universal material everything you can do with your imagination. You can, for example, make a banana tree. And so that you can understand how to do this, we created a master class on a palm tree from plastic bottles that are unnecessary on the farm, quickly and easily with your own hands, it contains detailed step by step instructions and photo and video lessons.
This tree will serve as a wonderful decoration for a holiday for children or a theme party. The more plastic bottles you use to create one palm tree, the taller and more magnificent it will be.
Making a palm tree from plastic bottles with your own hands step by step
To create a palm tree we will need the following materials:
- Plastic bottles different sizes and flowers
- Scissors
- Scotch
- The basis for the future palm tree. Usually a metal rod is used.
- Frame for future palm tree thick wire or metal pipe.
- Styrofoam or artificial bananas
- Yellow paint
- Wire
1) In order to make a palm tree trunk, you need to take 1.5 liter brown bottles 2 and 2.5. First you need to trim the bottle from the neck side by about a third. You will need the upper part, but don’t rush to throw away the lower part - you can also make a barrel out of it by analogy.
2) Cut the bottom of each bottle with a heated knife. We will attach the frame of our palm tree to this cut.
It is necessary to cut the part of the bottle with the neck into 8 equal parts. You need to cut from the wide edge to the narrow.
Now we need to make these parts pointed in shape so that it looks like a petal.
3) Bend the resulting petals onto outside– it will look like a blooming flower.
Palm foliage:1) So that our banana tree leaves have appeared, you need to take bottles of green (preferably different shades), white and yellow. The more colors you use, the brighter the palm will look.
2) Cut off the edge of the neck and the base of the bottle. We cut the resulting blank from the bottom of the bottle towards the narrow part into 3 approximately equal parts, but not all the way. There should be about 3 cm left to the end of the bottle. We give the edges of each part a shape like a narrowed semicircular petal. We begin to carefully bend these petals outward just as we did the trunk of a palm tree. The result will be something vaguely reminiscent of a three-blade fan. Now we cut each resulting sheet from the edge to the middle. You need to leave a little uncut space in the middle - about 2 cm. It looks like a fringe. The narrower the width of the strips you make, the more magnificent the fringe will turn out, and therefore the foliage of our palm tree.
3) Now the fringe strips need to be bent in different directions. 1- bend it up, 2- leave it as is, 3- down. This is how the sheet becomes voluminous.
4) There are 2 ways to decorate leaves. In the first case, we leave our blanks as is, and in the second, the blanks need to be strung on a flexible wire to create long, voluminous branches. In the second case, you will need more bottles, but the palm tree will also acquire a luxurious crown.
We take a dark brown bottle and cut it like a blank into leaves - from top to bottom into thin strips. We collect the pieces and wrap them inside.
Palm tree decoration.Cut out blanks for bananas from foam plastic and paint them yellow paint and carefully pass a thin wire through the top.
Collecting a palm tree:1) Take a palm tree frame prepared in advance. This could be a thick wire or a metal pipe. And we begin to put the finished barrel blanks on the frame with the neck down. First, we put on the larger pieces and begin to assemble the parts like a construction set. We compose until there is approximately 30 cm left to the edge. Try to arrange the petals of each part in a checkerboard pattern. We secure the parts at the base with glue or tape.
2) Depending on what kind of leaves you chose to make, there are 2 methods of attachment: 1-We begin to attach palm branches to the remaining empty upper part of the trunk. This is done in the same way as the trunk was assembled. Don't forget to use details different colors and arrange the leaves in a checkerboard pattern. 2 – attach the cable with the leaves strung on it to the frame of the palm tree at the very top and secure each leaf with tape.
3) Install the crown - glue the workpiece to the edge of the frame with the neck down.
4) We tie artificial bananas to palm branches
To secure our palm tree, we stick it into the ground metal pin about 30 cm deeper for stability (you can fill it with concrete if desired), but so that at least 40 cm sticks out of the ground - to string the trunk and put our palm tree on top.
Now our palm tree made of plastic bottles is ready.
Video on the topic of the article
For clarity, we also suggest you look detailed videos lessons on how to create your own banana tree.