How to make a chair and ottoman from a tire. How to make an ottoman out of tires

I decided to present to your attention a master class on making an ottoman from car tires.
This wonderful pouf is suitable both for the home and for the balcony, open terrace, gazebo. This ottoman is not afraid of the vagaries of the weather!!!
Let's take a closer look at this interesting master class together!

To work you will need:
Car tire (and also better wheel assembled)
Hemp or jute rope - 100-250 m (depending on thickness)
Board for legs - 24-36 mm (or ready-made legs)
Plywood - 6-8 mm
Waterproof glue
Thermal gun
Screwdriver
Drill
Jigsaw
Wood screws
stain
Furniture corners
Varnish
Wide brush
Dye

First you need to take the wheel the right size and wash it thoroughly and dry it.

Then cut out of plywood, using a jigsaw, according to the diameter of the wheel.

But here the author clarifies that the lower circle should lie flush with the side surface, and the diameter of the upper circle should fit tightly into the wheel rim, i.e. be slightly smaller.

To make legs, you can take old legs as a template, trace them with a pencil and cut them out using a jigsaw, you can buy ready-made ones, or if you have a good imagination, come up with your own unique design legs

Then you need to make markings on a larger diameter plywood circle for the legs.

After the glue and stain have dried, you need to turn the workpiece over and apply universal glue around the perimeter of the plywood, and place the wheel on the workpiece. Also glue the upper blank to the wheel, applying glue along the rim of the disk.

And finally, the most interesting part is the finishing of the ottoman (at least for me, as a woman!).

The legs of the ottoman can be painted bright colors, universal enamel is suitable for this.

And on final stage We open the ottoman completely with varnish.

Such a masterpiece can be used not only as an ottoman, but also as a table.

Welcome to the website of crafts and needlework. Today we will describe how to create a creative pouf with your own hands from a car tire, thick rope and plywood.

The idea is very simple, but at the same time very useful and versatile: it is comfortable to sit on, and the ottoman can be used as a coffee table.

We have already written how you can use car tires: creating flower beds in your dacha, and in this case we will use car tires more practically. A pouf made in this way can be useful not only in a summer cottage, but also in a city apartment, in a cafe, or on a picnic.

To make a pouf from a tire you need:

car tire,
thick rope,
2 round pieces of plywood 55 mm,
Upholstery fabric,
glue gun,
scissors,
self-tapping screws

Tools: drill, screwdriver or screwdriver, jigsaw.

Let's start making the ottoman

First you need to prepare the tire itself, to do this you need to wash it and wipe it dry with a rag or let it dry in the sun.

We install the plywood circle on the tire and screw in 4-5 screws along the radius of the tire (the screws must go completely into the tire). For convenience, you can pre-make holes with a screwdriver. We do the same actions, turning the tire over to the other side.

Next, let's start decorating our ottoman using a thick rope. Using a glue gun, we begin to attach the twine, starting from the center of the plywood circle. Then in a spiral we cover the entire tire. We don’t touch the bottom of our ottoman and leave it as is. If there is an extra piece of rope left, then simply cut it off.

You can apply a colorless varnish to the finished ottoman, which will reliably protect it from dirt. You just need to apply it in several layers for the best effect. After waiting for the previous layer to dry, apply the next one.

We wait for the varnish to dry completely, we can use tire pouf as intended. And using your imagination, you can come up with a lot of appointments for him.

Read more interesting things on our website. We are always glad to see you!

How to make an ottoman from tires with your own hands.

The site has many master classes on making homemade furniture from car tires. In this instruction, ottomans will be made from tires.

Necessary materials for making an ottoman:

3 tires per 1 stool;
— epoxy resin;
- foam rubber;
- 9 mm plywood or the lid of a 5 liter paint bucket;
— leather/synthetic leather;
- heavy-duty stapler gun.

Making an ottoman

First of all, you need to wash your tires well to remove all dirt. Now apply glue to the highest point where the tires will touch. Place the tires on top of each other. Adjust the height yourself. In this instruction, 1 stool was made from 3 tires. Wait a day for the glue to dry.

Making a cover
Measure the height and diameter of the tire. Add 2-3 cm to the results obtained for the seams. Cut out a rectangle.
Cut a circle smaller than the diameter of the tire for the bottom cover.
Wrap the tires in a rectangle of fabric, wrong side up. Secure the pipe shape with pins. The shape should be a little tight. Now slowly remove the pipe and stitch it. Fold the resulting piece in half its width and make marks as shown in the photo. Thus, the pipe was divided into 4 equal parts.
Now fold the circle in half and make marks. The circle is also divided into 4 equal parts.
Connect the pipe and the circle at the marks. Distribute the fabric evenly and pin the pieces together. Sew the circle to the pipe.
Unscrew the resulting cylinder and place it on the tires. Then you need to stretch the fabric tightly and staple it to the rubber, as shown in the photo.

Lid
Measure the tire diameter and reduce the measurement by 40mm. Take 9 mm plywood and cut a circle out of it with the resulting diameter.
Now place the foam on top of the plywood circle, and circle the circle 25mm larger.
Then you need to cut a circle of fabric even larger than the foam rubber by 25 mm.
All that remains is to connect all the parts of the lid with a stapler, and then glue the lid to the base of the stool.

Source www.freeseller.ru

Handmade things are always treated with special love. After all, the soul is invested in them, individual design ideas are embodied. Often such things become the main attraction of the house.

Why furniture made from tires should interest you

Currently, those who like to make things with their own hands as source material Often used car tires are used. On summer cottages from this material you can see flower beds, swings, washbasins, and garden decorations, and, of course, furniture. All these products fit perfectly into the country landscape, are very economical, but, most importantly, they are made by hand.

This does not require special skill, materials or tools. All you need is ingenuity, imagination and non-standard solutions. Therefore, making furniture from tires is an inexhaustible source of creativity for every craftsman.

What materials and tools will be required

To make an ottoman from car tire The following tools are needed:

electric jigsaw;
screwdriver;
furniture stapler;
glue gun;
scissors;
pencil;
brush.

Materials you will need:

plywood 10-12mm thick or chipboard;
furniture wheels or legs;
foam;
fabric or leatherette;
thick rope;
self-tapping screws;
colorless varnish.

Instructions for making a beautiful ottoman from tires

We will divide the ottoman production process into three parts:

Making the lower part.
Making a seat.
Work with the side part.

Attention! Before you start working on the tire, it must be thoroughly washed and dried.

Initially, you need to determine the place where the ottoman will stand. If it's open dacha area, then to the lower part additional elements may not be installed. It is quite stable and is not affected by climatic precipitation. If you plan to use the ottoman on the veranda, in the gazebo or country house, then it is necessary to make a bottom. To do this, you need to draw a circle on plywood or chipboard, the diameter of which is equal to the outer diameter of the tire, and cut it out with a jigsaw.

Attention! In order for the bottom to be more durable and not exposed to moisture, it must be painted in two layers with furniture varnish or oil paint.

Then, using a screwdriver, legs or furniture wheels are attached to the bottom. The bottom of the tire is secured with self-tapping screws. The presence of a lower part also allows you to store things inside this furniture.

To make a seat, you need to draw a circle on plywood or chipboard, the diameter of which is two centimeters larger internal diameter tires, and cut it out with a jigsaw. Then place this blank on the foam rubber and draw a line along the edge of the circle with a pencil. Use a knife to cut the foam along the line.

Lay out a cloth on the table onto which cut out circles of foam rubber and plywood are laid. The fabric is stretched and secured around the perimeter to the plywood with a furniture stapler. Once completed, excess fabric is trimmed with scissors.

Attention! If the ottoman will not stand under a canopy, it is better to use raincoat fabric so that it does not get wet.

Side part works are the most creative. Their task is to give the ottoman a unique designer look.

The easiest option is to paint it with paint. It can be a solid color, pattern or ornament.
You can also use fabric or leatherette for finishing. A piece of such material is placed on side part and the location of its connection is marked. Then on sewing machine a seam is made along the mark to form a cylinder. The resulting blank is put on the tire and tucked under the bottom and seat.
Very interesting view The ottoman is obtained by finishing with a thick rope. To do this, glue is applied to the tire around the perimeter of the seat, with which the rope is secured. It is applied in dense layers over the entire surface. For strength, the rope is coated with colorless varnish.

If an ottoman made from one tire is not very convenient in height, then you can use two or three blanks, which are fastened together using self-tapping screws or bolts.

This article contains instructions for making an ottoman from a car tire and some options design solutions, which will help everyone independently make similar furniture for their garden and unleash their creative potential.

Source setafi.com

Tires that have fallen into disuse have found widespread use in subsidiary plot. What they just don’t make up skilled craftsmen: both flower beds and crafts for decoration personal plot, and children's swings. Another option is to make an ottoman out of a tire with your own hands. Practical and creative! Such furniture will be useful not only in the country, but also in a city apartment. So, a do-it-yourself ottoman made from a wheel: features and a detailed master class.

Advantages

Handmade furniture is always appreciated. Often it can become the main decoration of the house, because when making it, each craftsman puts his soul into his product and uses individual approach. In addition, the work does not require any special skills, expensive materials. Often used wheels are simply thrown away as unnecessary. But it turns out that they can be given a second life!

This ottoman is quite comfortable to sit on as it is stable. In addition, it can be used as coffee table. Such ottomans will look great in a gazebo, on the veranda or in the hallway. As you can see in the photo, they look quite original. There are at least three ways to make such simple furniture.

First way

You can make a pouf from one wheel, but it will be a little low for an adult. Therefore, we suggest trying to connect two tires together. To work you will need the following tools:

jigsaw;
screwdriver;
file;
construction stapler;
scissors and knife;
pencil or marker;
screws.

The materials you will need are two tires, plywood, foam rubber for laying, fabric for covering, a belt or hose. We wash the tires thoroughly to keep them clean. On the one that will be the top, we cut out four small holes for further fastening the seat.

The wheels can be connected to each other using screws.

The seat is made of plywood. Draw a circle on a sheet of paper - the same diameter as the tire. Then cut it out with a jigsaw and file the edges.

Make a round pad from foam rubber.

Cover the seat with fabric, securing it to the plywood with a stapler on the back side.

Use a belt or hose to secure the seat.

Attach it to the top wheel with screws.

The rubber part can be painted in your favorite color. This is one of the options for making an ottoman from a tire. As you can see in the photo, it looks quite original.

Second way

There is another method - using a rope. You will need:

jigsaw;
screwdriver or screwdriver;
scissors;
glue gun;
self-tapping screws;
thick twine or hemp rope;
upholstery fabric;
brush.

IN in this case from chipboard sheet cut out two circles and attach them with self-tapping screws on both sides of the tire.

Then you can start decorating the future pouf. To do this we use a coil of rope. You need to start from the center of the top circle. With help glue gun the rope is secured in a spiral.

When the cover is ready, we proceed to the sides of the wheel. We wind the rope in a spiral in the same way. You need to work carefully, tightly pressing the new turn to the previous one. Leave the bottom as is.

When the twine sets, that is, the glue dries well, coat the ottoman made from a tire with colorless varnish.

For reliability, it is better to apply several layers. This will protect it from moisture and dirt, which will make it easier further care for the product.

This DIY seat made from tires looks beautiful in an eco-style room.

Third way

If you don’t want to bother with the rope, no problem. To quickly make a seat, you can simply place an old cushion inside the wheel. In this case, also prepare:

foam;
fabric/mesh;
lace or fringe;
thick threads for sewing;
self-tapping screws

If you want the pouf to be as tall as a chair, use two wheels. Connect them together with self-tapping screws. Cut a rectangle of foam rubber large enough to wrap around the wheel. Sew its edges. Thanks to this, the frame will become soft and beautiful.

Cover the top of the frame with thick fabric, and place a circle of foam rubber on top. Then cover the seat with one piece of upholstery material, and the side part with the other. Use strong thread. You can decorate the product with lace, fringe or other decorative elements. Look at photos of such products and borrow an idea.

And one more thing: so that the furniture can be easily moved around the room, you can attach handles to it. An old belt will do for this. Make loops out of it and attach it to the frame with screws. Thus, you have learned how to make beautiful poufs from tires in three ways.

Necessary materials for making an ottoman:

3 tires per 1 stool;
- epoxy resin;
- foam rubber;
- 9 mm plywood or the lid of a 5 liter paint bucket;
- leather/synthetic leather;
- heavy-duty stapler gun.

Making an ottoman

Gluing

Storage box
The stool can also be modified to hold items.
1. Place a wooden disc on the tire. Mark the locations where the bolt holes should be. Remove the lid and make holes. They should be slightly larger than the diameter of the bolt, because... rubber has the ability to compress.
2. Apply glue to the cover, screw the bolts into the holes in the plywood and tighten the nut. Now apply glue to the foam and cover everything with a cloth. Remember that the foam should be slightly larger than the plywood, and the fabric even larger than the foam.
Fasten the fabric to the plywood using a stapler.
3. The tire cover is made using the same pattern as shown above.

Now you need to make holes in the fabric in places where there were already holes in the tire. To do this, you need to pull the fabric towards you and punch holes through the fabric into the tire. Insert the bolt and nut into the resulting holes, and secure the staple fabric with inside tires Remove the bolt.
The tire stool with storage space is ready!

This article News portal I decided to dedicate the “site” to interior decoration. We bring to your attention a stylish and fashionable piece of furniture – a tire ottoman. Such a beautiful and convenient item home furniture You can easily do it yourself! Yes, yes, just imagine, you don’t have to buy such beauty in stores designer furniture and pay incredibly large sums of money.

A ready-made ottoman made from a tire, made by yourself, will look great in country house, on the veranda, in the garden, in the gazebo, in a city apartment and even in a cafe or restaurant.

Well, now, let's figure out what materials you will need:

— old tire;

- thin rope or thick rope;

- hot glue gun;

- a piece of plywood;

- bright furniture fabric;

— synthetic winterizer or foam rubber;

— furniture glue;

- furniture stapler;

- scissors;

- four large buttons.

Manufacturing:

The tire must be thoroughly washed and dried. Then wrap it with a thin rope or thick rope, fixing it with glue.

Then cut a circle from a piece of plywood, the diameter of which will be slightly larger than the diameter of the hole in the tire. Place the cut plywood in the center of the tire, securing it with glue. This will be the bottom of the ottoman.

Now we cut out another circle from another sheet of plywood. We glue foam rubber to it, and then wrap it in a beautiful furniture fabric, which we fasten using furniture stapler. This will be the seat of the ottoman.

We decorate the ottoman with four large buttons.

A detailed master class on making an ottoman from a tire can be seen in this video.