How to make a homemade mousetrap - catch rodents using simple methods. Homemade mousetraps with your own hands at home

Mice can not only gnaw through food packaging, spoil things and scare households with their appearance; gray rodents are carriers of the most dangerous infectious diseases.

The fight against tailed invaders should begin immediately , often a homemade trap is the only way to cope with the situation.

Making a trap from a plastic bottle - the simplest option. In every apartment you can find a couple of empty drink containers.

To make a simple mousetrap, you need to take:

2 liter bottle;
string or fishing line;
a small piece of food with a strong aroma for bait.

The manufacturing method is simple:

Cut off the neck with the lid.
Pierce the lower part with an awl or nail heated over a fire.
Pass a rope (fishing line) of the required length into the hole, fix the end on the underside so that it does not jump out. To securely hang the structure, a wall kitchen cabinet handle or a powerful hook will do. The length of the rope should be sufficient.
Place the treat at the bottom of the container.
Place the mousetrap on the edge of a horizontal surface (table, stool) so that the bottom with a piece of food hangs over the floor.

As soon as the animal climbs into the trap and begins to try the treat, the device will fall off the horizontal surface under the weight of the tailed pest and remain hanging.

Bottle trap: 4 types

There are several other ways to catch a harmful animal.

How to do:

Cut off the bottom of a container with a capacity of one and a half liters. Cut the edge into triangles with scissors (length 6-8 cm).
Place bait with a pungent odor (cheese, lard) inside.
Carefully bend the triangles with their sharp ends inside the trap.
Lay the structure sideways on a horizontal surface. The mouse will sneak behind the bait, but the curved teeth will not allow it to get out of the trap.

Manufacturing:

Take a 0.7 liter glass container with a wide opening; a champagne bottle is ideal.
Pour a tablespoon of warm oil inside. Oil should be chosen with a strong aroma (unrefined sunflower, olive).
Shake the structure to coat it from the inside, coat the neck.
Set the trap obliquely on the floor with the neck up. The mouse will climb inside, but will not be able to get out due to the slippery surface.

Anyone can make such a trap.

Step-by-step instruction:

Carefully cut the two-liter bottle in half with a sharp knife. The bottom part should be larger than the neck part.
Place a piece of food at the bottom of the first part, tightly insert the second part with the neck inward.
Secure the edges of the device with tape, wire, or a stapler. Grease the top with oil. The rodent will get into the neck, but will not be able to crawl back out.

A basin, a small bucket and a bottle with a capacity of 0.5 liters can also be used as a mousetrap.

To build a trap, you need to prepare:

small bucket, basin;
soda bottle;
stick or thick iron rod;
a strip of thick cardboard;
bait

How to do:

Pour water into the bucket (a little less than half). Prepare a stick or rod by measuring a length greater than the diameter of the bucket.
Pierce the bottom of the bottle and insert a stick.
Attach a delicious-smelling treat to the side of the bottle with tape (bread dipped in vegetable oil is ideal).
Place the stick on the edge of the bucket.
Cut a strip out of cardboard and make a “bridge” along which the mouse can get to the bait. Having climbed onto the bottle, the animal will turn the structure and end up in the water.

Another way to catch a mouse - make a trap from a bucket, a large pan, a basin and a wooden slat.

To make it you should take:

spacious capacity,
wooden slats or rulers
iron wire and glue.

How to make it correctly:

Glue the wire and wooden slats perpendicularly and dry.
Pour water into the container, a little less than half the volume.
Place the rack on top of the vessel so that one side hangs above the water, and place a piece of food with a strong smell on this edge.
Place the mousetrap in such a way that the mouse can get onto the rail. The gray pest will follow the rail towards the bait; when the structure shifts its center of gravity, it will throw the rodent into the water.

Glass jar - the most accessible and uncomplicated way to catch a mouse.

To make it you need to take:

liter jar;
coin;
thick wire;
piece of sausage.

Step-by-step algorithm:

Measure the wire using a ruler; the length should slightly exceed the diameter of the can opening.
Put on the sausage, fold the edges.
Place the wire in the middle of the jar.
Place the mousetrap with the hole down and lean one side against the wall.
Place the end of a coin under the edge of the jar. The rodent will climb inside, try to pick the sausage, the coin will fall off, and the mouse will be covered with the jar.

It is more difficult to make a mousetrap from a wooden block, but such a product also lasts much longer, and its efficiency is high.

Manufacturing stages:

Take a wooden block 10 cm long and 5 cm wide.
Drill a hole in the block at least 2 cm in diameter with a depth of 7-8 cm.
Make a cut along one side of the block (width 3-5 mm).
Drill 3 small holes, placing them perpendicular to the axis of the large hole.
Bend a ring with an “eye” from the wire.
Make a spring of 3 turns from spring wire, leaving 7-9 cm at the ends.
Tie a fishing line or strong thread to the ring.
Thread the fishing line into 2 small holes one by one and secure.
Place the ring into the place where the cut was made so that the entrance to the large hole remains free.
Insert one end of the wire spring into the last small hole, and thread the other through the “ear” of the ring.

The mousetrap is ready, all that remains is to pour nuts or seeds into the large hole and wait for guests. The mousetrap works according to the following principle: the animal follows the smell of the bait, chews off the fishing line that interferes with the passage, the ring falls and pinches the mouse.

It is believed that a mouse will never refuse a piece of cheese, but this statement is fundamentally wrong: the cheese will be eaten if there are no more delicious delicacies in the house.

What is best to place in a trap so that the tailed animal is sure to climb into it:

Smoked lard– takes first place in the ranking of mouse delicacies. Not a single rodent can resist its smell.
Fragrant vegetable oil- second place on the list. Mice love both sunflower and olive oils.
Wheat bread- on the third place. To enhance the attractiveness of the bait, you can moisten a piece of white bread with aromatic oil.
Roasted seeds–all types extremely attractive to animals. For bait you only need to take a few pieces. Pumpkin seeds are preferable.
Nuts– hazelnuts, peanuts or almonds will be an excellent bait.
Smoked sausage– its aroma is similar to smoked lard and can successfully replace it as bait.
Piece of smoked fish- another delicious dish for tailed invaders.
Fragrant baked goods with the smell of vanilla– the product will attract animals with its sweet smell.

Conclusion

If you can’t buy a mouse trap in the store, don’t worry. All homemade mousetraps are distinguished by their simplicity of design and extreme efficiency.

The appearance of mice in a house or area is a very unpleasant event. There are many ways to get rid of unwanted guests in your home, but all of them entail the painful death of the caught animal. Read the previously published article - what it is and how it works!

What should those who do not want to kill animals, even if they harm people, do? And looking at the torn remains of a mouse is not a pleasant sight. It is much more enjoyable to remove pests from your home using humane mouse traps. Below are options on how to make a humane mousetrap without much effort.

To make such a mousetrap you will need a plastic bottle, tape or plaster, an iron pan or bucket, a small board and an iron rod.

First you need to install the pan in the place where you plan to hunt mice. Next, you need to make two holes: one in the lid, the other at the bottom of the bottle. A metal rod is threaded through the holes - it should not be shorter or longer than the diameter of the pan.

Length of the rod = inner diameter of the container

The twig is inserted together with the bottle into the pan. Before this, a piece of some food is glued to the middle of the bottle using tape. On one side of the pan, you need to install a board at an angle, which will help the mouse reach the bottle.

It is necessary to pour a little water into the container so that the mouse cannot jump out of it after being hit. When the mouse tries to get to the middle of the bottle, it will have to step on it. The bottle will begin to spin on the metal rod and the animal will fall into the pan.

A very big advantage of this mousetrap is that with the help of such a device you can catch several mice per night!

Humane mousetrap – liter jar and walnut

This version of the mousetrap is the simplest. You will need to take a liter glass jar, a piece of cardboard or a large plastic lid, as well as a walnut and a piece of bread.

Mice also really like ground roasted seeds, so they can be used as bait along with bread. The walnut is cracked and all contents are removed from the shell. You only need one half, which needs to be filled with bread and seeds. A glass jar is placed on plastic or cardboard. One edge of the jar is raised and a nut is placed under it. The part filled with bait should be directed inside the jar. When you try to pull the bread out of the shell, the mouse will end up under the jar. By moving the nut towards herself, she will block her exit and end up in a trap.

Humane mousetrap made from a plastic bottle: the swing principle

At first glance, the design of this trap may seem complicated and someone will decide that it would be much easier to buy a humane mousetrap. But that's not true. No special equipment is required. The following components of the future mousetrap will be needed: a liter bottle, a clothespin, a thin iron rod, a wooden block.

An iron rod is driven into the middle of the wooden block. Two holes are created in the bottle just above the middle towards the neck. Thanks to them, a bottle without a cap is strung on a rod driven into a wooden block. A clothespin is placed on the second tip of the rod to prevent the bottle from falling off. Next, a screw is screwed in the upper left corner. It will be the base of the structure that will fix the bottle cap at the same level. There should be two holes in the lid. Through them, the cap is installed on a pin opposite the neck of the bottle. The cap should not be positioned in the same way as it is usually positioned to close a bottle, but vice versa.

The inside of the bottle is lubricated with bait. The bottle should swing and its upper part, falling down, should rest against the cork with its neck. Thus, having sneaked into the bottle, the mouse will not be able to get out of it, since, making its way to the neck, it will lower the bottle with the weight of its body to the level of the lid, which is blocking the exit from the outside.

Humane bucket mousetrap

The good thing about this mousetrap is that you can use it to catch several mice at once. It is better to pour water into a bucket, because mice jump beautifully. The water will prevent them from jumping out of the trap. A strong iron rod is threaded through the bucket holder lugs.

In the middle there should be a “springboard” for mice, cut from a piece of plastic. One end of this plastic board should be adjacent to the edge of the bucket, the other should be suspended. Another important point is to secure the feeder in the middle of the bucket, next to the edge of the plastic. To do this, you can use the same metal rods, fastened together with wire and strung on the main metal rod. You need to put food in the lid on the feeder, trying to get to it, the mouse will fall into a bucket of water. The bait will remain intact, since if the mouse approaches the edge of the plastic board, it will inevitably fall down.

Conclusion

Any of the above options will help get rid of pests in your home without causing harm to anyone. The materials for making such traps are available to absolutely everyone and will not require any monetary expenses. It is worth making a little effort to enjoy the absence of uninvited guests in your home.

One of the most unpleasant problems of private houses and apartments, located mainly on the 1st floors, is the possible invasion of rodents (rats, mice). In order to protect your home from this nuisance, it is enough to place mouse traps in secluded places.

To do this, it is not necessary to go to the store or buy poison, which can harm not only uninvited guests; a mousetrap can be assembled from improvised means without having any special knowledge.

Causes and consequences of rodents

Mice are very small and nimble animals, so getting into their homes will not be difficult. Most often, the invasion begins in the fall, with the onset of cold weather, but if the house has all the favorable conditions for their existence, then they can come at any time.

The reason for the penetration and spread of rodents in the house is always the same - unsanitary conditions. They are attracted by leftover food on the floor, table, and garbage that was not taken out on time, but it will also not be difficult for them to open plastic and cardboard boxes with supplies.

The presence of mice can be determined by several signs:

strange night noises (squeaking, rustling);
chewed packs and bags;
musty (mousy) smell;
feces on the floor and shelves near food.

Cohabitation with rodents is not only morally unpleasant, but also often life-threatening. Mice are capable of carrying diseases that can be fatal to humans, and the saliva of animals contains microbes that cause severe poisoning. In addition to infections, rodents can bring fleas with them.

In addition, mice can cause a short circuit and, as a result, a fire if the wires are damaged.

Differences between purchased and homemade traps

Factory-made rodent control products are not only mousetraps in the usual sense, but also poisons, chemicals and ultrasonic agents.

When using toxic agents, not only mice, but also pets are at risk. When using poisons sprayed into the air, the living space will have to be left for a while, and then ventilated thoroughly and for a long time. In addition, before dying, the animals will suffer for a long time, which is completely inhumane.

Glue-based mousetraps are not suitable for pet owners; the glue will withstand a rodent, but a cat or dog can easily spread the sticky mass throughout the house. In addition, if you fall into such a trap, the mouse will squeak for a long time and loudly, and since the animals become active at night, this will cause a lot of trouble.

The most gentle in this case are devices based on the use of ultrasound, but they all have a rather high price.

To save your budget and protect your pets from the danger of poisoning, homemade mouse traps are better suited, the assembly of which does not take much time and is made from improvised materials. Unlike purchased ones, more than one animal can get caught in them, and in this case the rodents do not die, but only end up in a trap, so they can then be released into the wild away from the house.

Types of homemade mousetraps

As a basis for creating a mouse trap with your own hands, you use items that absolutely everyone has at home:

You can make several types of mousetraps from plastic bottles.

To make one of them, cut off the upper part of the container and, turning it upside down, place it in the lower part; it is better to secure it tightly, glue it or fasten it with wire. Bait is placed at the bottom of the bottle, and the inner surface of the neck is lubricated with oil. To make it easier to get into the trap, you need to build a bridge to the cut edge. The mouse slips through the neck of the bottle and cannot get back out. In this case, the rodent may be interested in both the bait and the smell of the oil.

Another version of a plastic bottle mousetrap is also easy to make. The top of the container is cut off, leaving a hole for entry, and placed on the edge of the table so that most of it hangs down. The bait should be in the bottom. You will need to secure the trap with rope or fishing line. The mouse, trying to get to the food, enters the bottle and disturbs the balance of the structure. Tara falls off the table and hangs on a rope.

When making another type of trap, you will need a plastic bottle, preferably 1.5-2 liter. In the lower part (2-3 cm from the bottom) round cuts are made in the form of petals with edges curved inward. Food is placed in the bottle, and the mouse, once it gets into the trap, cannot get back out because of the sharp petals.

Glass bottles can also be used as a mousetrap. To do this, you need to choose a container with a wide neck, for example, a champagne bottle. Vegetable oil is poured into the bottle - about a third. After this, the bottle is shaken so that the oil is distributed over the inner surface. The container must be installed at an angle with the neck resting on some object. The mouse gets inside through the neck, and the oil prevents it from getting out.

To create a more complex trap, you will need a bucket, a metal rod and empty aluminum cans.(you can also use plastic bottles). A hole is made in the bottom of the jar with a diameter slightly larger than the rod so that the container can rotate freely on it. The rod is threaded into the jar and installed at both ends on the edges of the bucket. Approximately in the middle, the bait is placed, when the mouse tries to get it, the rod will spin and the rodent will fall into the bucket. To prevent the prisoner from escaping, you can pour water into the bucket.

Using a bucket, you can build a simpler trap. You will need a sheet of thick paper or cardboard of a size that can be used as a lid. Water is poured into the bucket; this will prevent the rodent from escaping. Several cuts are made in the middle of the sheet from the center to the edges. The paper is placed on the bucket, and the bait is placed in the center. The mouse, going for food, presses through the cut part and falls through. The bait can also be suspended over the center of the leaf if it is too heavy.

Another option for a mousetrap with a bucket is also quite simple. You will need a wooden ruler and a metal rod (thick wire). The ruler and rod are fastened crosswise. The ends of the wire are placed on the edges of the bucket so that part of the ruler with the bait hangs over the bucket. A mouse walks across an improvised bridge to get food; under the weight of the rodent, the wire twists and the captive falls into the trap.

As a basis for another type of mousetrap, you can use a glass jar, an old flower pot, or just a box. Its device is very simple. The container must be placed upside down, and a coin or washer placed under one edge. The bait must be secured to the wall of the structure, since the trap is quite unstable, and when the rodent tries to take the food, the coin will fall and the trap will slam shut. To make it easier to remove the prisoner, it is better to lay cardboard at the bottom. If you use the box as a trap, you need to weigh it down.

Bait selection

Despite the imposed stereotype about rodents’ love for cheese, this is not entirely true; they are attracted not by the product itself, but by the smell emanating from the bait. Therefore, cheese can be replaced with cheaper or more accessible types of bait. Suitable for this:

cereals (buckwheat, rice, wheat);
sunflower seeds;
lard, sausage, pieces of meat;
bread (crackers) soaked in butter;
nuts.

To prevent mice from returning, you need to follow some preventive measures. Food, in particular cereals, must be stored in solid (glass) containers. The house (apartment) must be systematically cleaned with cleaning products; garbage must be taken out on time so as not to attract rodents with leftover food and odors that are tempting for them.

A mouse trap will help you get rid of unpleasant and sometimes dangerous rodents - it’s easy to make a device with your own hands that is no less effective than commercially available models. Making mousetraps yourself from scrap materials will save money, because most often, several devices are required simultaneously to eliminate pests. Based on the descriptions given, you can choose the most effective and simple to implement designs.

If the use of toxic substances to control rodents is undesirable due to the presence of children or pets in the house or dacha, and buying several traps in the store seems too expensive, it’s time to learn how to make a mousetrap yourself. For production you will need simple materials that are always available in everyday use - paper, various containers (you can often use empty unnecessary containers), wire, ruler, etc.

Please note: most self-made traps are reusable or self-charging, which allows you not to constantly monitor them and catch several rodents with one device, leaving the trap unattended while you leave (optimally - no more than a week, so that an unpleasant odor does not appear.

Bait

In order for pest hunting to be successful, it is not enough to know how to make a mouse trap. It is also important to “convince” the rodents to show interest in this trap, which means an attractive bait will be required. There is a common stereotype - mice love cheese. Animals really like this product, but sunflower seeds, lightly fried sunflower oil or a piece of bread dipped in it will be more effective as bait. Sesame oil is a win-win option - its aroma does not leave mice indifferent, and you can also use a piece of lard.

Bucket and ruler trap

This trap model is suitable for those who prefer the simplest but most effective solutions and prefer clear instructions, including how to make a mousetrap with your own hands. Another advantage of such a trap is the interchangeability of its elements - instead of a bucket, you can take an old saucepan or plastic container, and the ruler can be replaced with any suitable sized strip or strip of thick cardboard.

In addition to the ruler, you will need a knitting needle or a rigid, round metal wire. The knitting needle is glued to the ruler perpendicularly and serves as a support - it is laid so that both ends rest on the edges of the bucket. A strip or ruler glued to the knitting needle should rest on the edge of the bucket with one end and hang over it with the other. It is at the overhanging end that the bait is placed.

The trap is located in a place where the mouse can climb onto the rail laid on top of the bucket. The mousetrap will work even if the container is empty, but to increase efficiency it is recommended to fill the bucket about a third with water.

This trap works simply. The mouse walks along the ruler, attracted by the smell, but, having overcome the intersection of the ruler and the knitting needle, it shifts the center of gravity of the structure, as a result of which the end of the ruler, freely hanging over the bucket, drops sharply and throws the rodent into the container. In order for the mousetrap to be triggered repeatedly, the bait should be secured to a rail so that when triggered, it does not fall into the bucket along with the mouse.

Trap from a jar with cut paper at the neck

This DIY mouse trap is made by analogy with the previous one. To allow mice to climb to the top of the jar, a “ramp” is installed, but in this case the bait is placed inside the jar, the neck of which is covered with paper. In order for the paper on the neck of the jar to become a real trap for rodents, it is carefully cut (for example, with a razor) crosswise.

As soon as the animal hits the paper, the “petals” formed during the cut bend inward, and the mouse falls into the jar. In other options, it is possible to place a lightweight bait directly in the center of the cut paper, or the bait is tied to a rope and placed above the center of the jar.

The disadvantage of such a simple trap is that it is not very effective. Mice somehow sense a trick and are afraid of the cut paper.

Glass jar and coin trap

This homemade mousetrap from a jar is simple and can also be made from a saucepan, and if desired, the coin can be replaced with a large button or a metal washer. A coin (button, washer) serves as support for the raised edge of the jar. A strong thread with a hook at the end is glued or tied to the support. A rod is installed inside the container (you can use wire, a twig, etc.), through which the thread is thrown. The bait is put on the hook.

Attracted by the aroma, the mouse pulls the hook with the bait, after which the thread tightens and pulls the support out from under the can. For maximum effectiveness, the bait should be placed at a distance of 2-4 cm from the surface. The disadvantage of the trap is that it requires reloading. That is, having “covered” one mouse, the can ceases to be effective.

In a simpler version, the bait can be glued to the wall of the jar, then when you try to get to it, the mouse will shake the jar, which will lead to the support falling.

In order to remove a caught rodent, it is convenient to slip a sheet of cardboard under the triggered can.

Other ways to get rid of mice are described.

Plastic bottle traps

1 option

This DIY mousetrap is made from a plastic bottle in a few minutes. The container is cut at 2/3 of the height (the longer part is with the bottom). After this, the part with the neck is turned over (the neck without the plug becomes directed into the structure). The neck is lubricated with oil, and the bait is placed inside the container. To prevent the parts from coming apart, they can be fastened with glue, wire or another method. The mouse easily slips through the lubricated neck, but cannot get back out.

Option 2

Another simple mousetrap that even a schoolboy can figure out how to make.

A plastic bottle (the neck is cut off approximately at the point where the narrowing begins) with the bait inside is placed on a table or shelf so that a significant part of the container hangs over the edge of the surface. In this case, the bait should be located at the very bottom. Such a trap is tied to a shelf with twine, the length of which ensures that the trap hangs above the floor when it falls. When a mouse gets into a bottle, it shifts its center of gravity. The trap falls and hangs together with the caught rodent.

Mousetrap made from a bucket and a rotating bottle

One of the most ingenious solutions on the topic “how to make a mousetrap at home”, at the same time effective and easy to implement. It requires a metal rod-axis and a plastic bottle with a cap. Holes are made in the container (in the lid and bottom) along the diameter of the axis, after which the bottle is put on the rod so that it remains able to rotate freely. The rod is placed on the edges of the bucket. Optimally secure its position while maintaining mobility.

It is recommended to fill a bucket (you can also use a basin) with water. As bait, the bottle in the center is coated with any composition (attractive in smell to mice) (processed cheese, sunflower or peanut butter, etc.). After this, a “ramp” is built from the floor to the edge of the bucket. Having freely reached the edge of the bucket along such a “bridge,” the mouse tries to move onto the bottle, but the latter, under the weight of the rodent, turns around its axis and throws the pest into the container.

Glue traps

When choosing how to make a mousetrap with your own hands, you should not lose sight of simple glue traps. They will require special glue for rodents, which is sold in specialized stores, bait and bases (you can use thick cardboard, small plastic pallets, plywood, etc.). The base is smeared with glue, and the bait is placed in the center of the trap.

Getting to the fragrant “treat”, the rodent sticks to the viscous composition. Many consider the disadvantage of such a trap to be unaesthetic. It is no longer possible to unstick the animal from the mousetrap, and the sight of floundering rodents and their squeaking does not bring pleasure if the owners are at home.

Almost everyone is familiar with the situation when a mouse starts scratching in the attic or basement. Despite the fact that it is a pest, many people feel some pity for the tiny creatures and do not want to kill or hurt them. Of course, if we are talking about an attack by a whole flock on a barn with food, then there is no room for compassion. But in order to catch a single mouse, a humane mousetrap is perfect.

Methods of catching

There are actually quite a lot of them. It is worth going to a nearby hardware store and they will offer you a choice of several devices with which you can get rid of annoying rodents.

A live trap is a kind of humane mouse trap that does not harm the rodent. You can purchase it or make it yourself. A reasonable question arises: what to do next with the captured creature.
Special glue for rodents.
Ready-made glue traps.
Poisons. Of course, the poison works flawlessly. Another thing is where the rodent will die and how to find its body, which will not emit the most pleasant smell.
Cat. This is not always a reliable method, because some pets tend to quickly leave the place where they saw the mouse.

The worst thing is adhesive backings. The rodent will be alive, but its fur and thin skin on its paws will stick tightly to the composition. Therefore, if you are looking for a humane mousetrap, then this is clearly not your option.

We do it ourselves

If you are in the country and there is no store nearby, then you can make a device for catching a rodent with almost your bare hands. A humane mousetrap made from a plastic bottle will serve you faithfully. Any mineral water or juice bottle will do for this.

Moreover, you don’t need anything else to succeed. Open the lid and carefully pour a few tablespoons of vegetable oil inside. Place bait, which can be fried sunflower seeds. The smell will attract rodents. This is a humane mousetrap, because other than slight bewilderment, it will not cause any concern to rodents. The bottle is placed at an angle. It is very convenient to fix it with books. You can lay out several pieces as steps along which the mouse will climb into the bottle. Be sure to secure the edges with tape to prevent the bottle from tipping over. Otherwise the mouse will simply run away.

Operating principle

A humane mousetrap of this design is best placed on steps or on shelves. In such places mice are caught very quickly. The mouse climbs into the bottle following the smell of the fragrant filling. And vegetable oil prevents her from getting back out. For the same purpose, you can use a glass bottle, for example, a beer bottle.

In this way, you can catch not one, but several rodents at once in one bottle. If you catch one mouse, you can release it and return the trap to its original place.

Catching a mouse with a jar

This is another simple mousetrap that you can make yourself in minutes. You only need a liter jar, a 5-kopeck coin, a small bait and a piece of cardboard. On a flat surface you need to place cardboard, bait on top and a jar turned upside down.

On one side, place a coin edgewise under the edge of the jar. Choose bait a little larger than a coin. The mouse will climb inside and drag the bait, thereby moving the coin. The trap will slam shut and you can do whatever you planned with the mouse.

Disadvantage of this method

We looked at how to catch a mouse in a jar. But this method has one drawback. If the rodent decides to eat the treat on the spot, it can safely leave the trap. Therefore, it can be improved a little. To do this, it is recommended to attach the bait with tape at a height of 3 cm from the neck. The rodent leans on the wall of the jar to reach it. It is at this moment that the trap closes. In this case, it will probably remain inside.

Plastic container

Today we are looking at the most effective ways to catch a mouse. Not all of them can be considered humane, but no one invited rodents into your home. It is convenient to catch mice using a plastic bucket. To do this, you need to make holes in the container and insert a knitting needle into them. First you need to put a plastic bottle on it. It should spin freely and quickly. The bottle should be coated with beaten egg or porridge. We bring a board to the container, which will serve as a bridge. When the rodent climbs onto the bottle, it begins to spin and he falls into the bucket. You can fill it with water, then you don't have to think about what to do with the mouse.

The simplest design

Even a schoolchild can assemble it. To do this, you need to build a box with an open top and without one wall from glue and cardboard. We make a hole in the side walls for a pencil. Now we need a bottle with holes. Bait is placed at the bottom, after which the bottle is fixed in the box. When the rodent gets close to the treasured pieces, the bottle is outweighed - and the exit to the outside is cut off. Now the little creature is entirely in your power.

Tin Can Trap

You will need a regular can of tomato paste or condensed milk. In any of its walls you need to make a hole the size of a coin. In this case, the cloves should face outward. The rodent freely penetrates the jar, but the cloves prevent it from getting back out. All you have to do is add bait, and the mousetrap is ready. Place these homemade structures around the perimeter of the basement or attic and do not forget to check them regularly.

Mouse repellers

All of the above methods are good for combating individual representatives of the rodent family. But what to do if they constantly raid your home? How to get rid of mice in the house forever? Today we offer you a large number of ultrasonic devices that are very helpful in the fight against gray invaders. These devices do not cause them any harm, that is, they can also be classified as humane methods of rodent control.

The effect is obvious: annoying rodents simply avoid your home. Exposure to certain wavelengths causes panic in mice. Sometimes it even leads to loss of orientation in space. As a result, they will rush around aimlessly and forget about searching for food.

When choosing mouse repellers, you need to pay attention to the following points:

A high-quality device in a private home has the “Ultrasound Frequency Adjustment” function. More advanced models then regulate the ultrasound automatically. This does not give the rodents the opportunity to get used to it.
Don't expect one device to protect a large home. Sound waves cannot penetrate upholstered furniture and thick curtains. Therefore, if one device is enough for a small apartment, then for a house you will need at least two, and maybe three.
Be sure to check the technical specifications of the device you are purchasing. Some models have a specific range that guarantees their trouble-free operation. For example, if you decide to place the repeller in the cellar, it may turn out that it is not suitable for operation at low temperatures.
There is no need to skimp on the device. Cheap models may have a limited lifespan. In addition, they may malfunction.

Things to remember

To prevent rodents from visiting your home, you need to not only come up with mousetraps, but also prevent them from appearing in your home. Unsanitary conditions in the home should not be allowed. Close the trash can and take out the food waste container on time. Flour, cereals and seeds should be stored in special containers with lids. Check the condition of baseboards, floors and door frames regularly. Promptly seal holes through which mice can enter your home. Monitor the activities of services that deal with waste removal.

Preventative measures are the most important in order to protect your home from uninvited guests. But if they have already appeared on the doorstep, then measures need to be taken. To do this, today we looked at several options for homemade structures.