Massage table for hammam Manufacturer Ruspanel. Enjoy it to the fullest
Furniture for hamam
Polystyrene is used to make inexpensive quality furniture for the hammam: sun loungers, seats, benches, massage tables. Ruspanel - perfect material for the manufacture of products of this kind. The shape and size can be any, the same goes for colors.
The furniture is “warm” due to the low thermal conductivity of the foam polymer. It does not require prolonged warming up before relaxing in the hammam or before starting massage procedures. It is pleasant to sit and lie on it, touching your naked body to the smooth surface.
Furniture selection
For a classic massage, a smooth a massage table. Its smooth edges do not interfere with a relaxed person's lying down and getting up. The slab provides a reliable support when the massage therapist presses forcefully from top to bottom. The pressure is evenly distributed, and those lying on the table do not experience pain. The best relaxation of the muscles is achieved, they can be properly stretched and blood flow ensured.
Loungers are made with or without sides; furniture with a rounded edge is comfortable to sit on. The height of the backrest varies, as does its angle. If there is almost no backrest, the lounger turns into a bench. People rest on curved loungers in a reclining position; their shape follows the contours of the human body in a state of greatest relaxation. The curves under the shoulders, pelvis and knees are expressed to varying degrees.
A complete set of furniture from Ruspaneli will satisfy any visitor to the hamam. Products made to order differ from standard ones in that the customer himself determines their parameters. You can order the most suitable anatomical furniture for yourself, and universal furniture for your clients, with a minimum number of bends and size restrictions.
Advantages of Ruspaneli
In the hammam, the furniture must be durable: the massage therapist uses considerable force, performing up to several dozen procedures per day. Extruded polystyrene foam provides strength and sufficient elasticity of products. They retain their properties even after many years of regular use. But light material, microscopic air bubbles make up most of its volume. Accordingly, prices for furniture are affordable.
The polymer is absolutely impervious to moisture. The cladding of residential premises requires good ventilation, but in a hammam or sauna this property of polystyrene is only beneficial. In terms of fire safety, synthetic furniture is noticeably superior to wooden furniture. Even at high steam temperatures, polystyrene foam does not melt upon contact with it.
weight = 45 kg
- Products are made from a single piece of polystyrene
- Fragment dimensions 1000 x 1200 x 2000 mm
- Maximum product sizes are not limited
- Any configuration
- Production time is five working days
- Low cost
- Quick installation
- Any design
- Uniform water heating system
- Uniform electric heating system
- Facing with a reinforcing and waterproofing layer
- Drank under uniform heating
Sopro tile adhesive is ideal for laying mosaics and ceramic tiles on panels. For grouting mosaic and ceramic tiles, use a high-quality grout.
Attention! It is prohibited to copy site materials in full or in part without first obtaining permission from the owners of the online store.
Ecology of consumption. Estate: Hammam is a Turkish type of bath, which is based on the principle of gradual and gentle heating of the body, and then the same gradual cooling.
Hamam is a Turkish type of bath, which is based on the principle of gradual and gentle heating of the body, and then the same gradual cooling. Traditional Turkish hammams usually have two or three rooms, the temperature of which varies from 35 to 60 degrees Celsius. Also distinctive feature Hamam from, for example, a Russian bathhouse is a method of heating a room - if a Russian bathhouse involves a stove, then heat is supplied to the hammam in the form of warm steam through pipes, and the steam itself is created by a steam generator.
Useful properties of hamam
First of all, the hammam is the only bathhouse that is useful for people with diseases of the cardiovascular system. Thanks to the gradual and not so aggressive heating, as well as the absence of stressful actions such as hot steam and whipping with brooms, such a bath will be very comfortable for everyone.
In addition, the hammam normalizes work digestive system and intestines, calms the nerves, relaxes, has a beneficial effect on the functioning of the liver and kidneys. Promotes the release of toxins and waste from the body.
Choosing a place to build a hammam
Before you start construction works, you need to thoughtfully design your future Turkish bath: remember that for a private hammam you need to make two rooms - a steam room and a technical room. Just like when building a regular bathhouse, you will need to find a place to lay engineering communications- water supply, sewerage, electricity, heating, steam pipes and ventilation systems.
The dimensions of the bath room are limited only by the size of the site, your personal preferences and imagination. You can see the approximate dimensions of the bath in the following figure:
But as for the technical department, this room can be the smallest, but only so that it must fit a steam generator, aroma generator, cleaning filters, ventilation systems and heating control panel.
About materials
Traditionally, in the construction and decoration of hammams they used a natural stone- marble and granite. The stone always supports comfortable temperature, pleasant to the body, waterproof and durable. But, unfortunately, completely finishing the hammam with stone is a rather expensive solution.
In this case, either comes to our aid fake diamond, or ceramic tile, or a mosaic made of smalt, which looks simply magnificent and emphasizes the national flavor of the room. The main criteria when choosing materials are their heat resistance, low degree of incandescence and moisture resistance.
Light and warmth
Heating of the hammam can be either water heating - with laid pipes through which hot water circulates, or electric - in fact, it is a “warm floor” type system that has a control panel and the ability to regulate the heat. A classic hammam is built in such a way that there is heating on almost all surfaces - on the floor, walls, benches and tables.
The lighting in a Turkish bath should be good, moderately bright, but not irritating. Heat-resistant lamps and shades with matte milky light are ideal. Remember that all electrical devices and wiring should be protected as much as possible from hot steam and moisture, and the voltage should not exceed 25 volts.
Required attributes
No Turkish bath is complete without such wonderful things as a kurna and a massage table. Qurna is a bowl for washing, which is a large vat with two taps - cold and hot water. For greater authenticity and harmony of the hammam interior, the kurna is made in an oriental style, for example, in the form of a carved bowl, jug or sink.
The massage table, as well as the benches for sitting in the hammam, must be heated. The table for relaxing massage treatments using rich soap foam is usually made of stone - and no wood in a Turkish bath! In a classic, traditional hammam, massage tables are made large enough to accommodate four to six people. We can get by with a massage table, lined with mosaics, for one person, the height of which above the floor is 80 centimeters.
Ceiling and floor
The floor and ceiling in the hammam also have their own characteristics. As for the floor, it is necessary to provide, in addition to heating, a slope for draining water, as well as a device for removing odors from the sewer. Typically, the floor in a hammam is made of two layers of cement and sand screed, and between them there is waterproofing and a heating system - pipes or wires.
The ceiling in the hammam can be of any shape, but not straight! The Turks believe that condensation forming on the ceiling and falling down interferes with the complete relaxation and harmony that the hammam space is so conducive to. The shape of the ceiling can be domed, vaulted, triangular. But there is one thing important requirement- the total height of the room must be more than two and a half meters.
Currently, unlike Russian baths and Finnish saunas, hammam is much less popular for arrangement in a country house or cottage - and it is completely in vain, because This is a surprisingly nice thing. And not very expensive, by the way. You can try it yourself! published
Massage table - 1
Manufacturer: Own production
Country of origin: Russia
Classic massage table for hammam. It is comfortable to lie on, and it is convenient to walk around it when doing a massage. While relaxing, you will get maximum pleasure.
Dimensions and installation
Standard sizes oval massage table:
Length 2,000 mm
Width 800 mm
Height 800 mm
It can be placed either in the middle of the room or close to the wall. We will change the part that will be near the wall so that there are no unnecessary openings and voids. At your request, you can change the length and width of the product. The cost of the modified design depends on the size and complexity of manufacturing, check with your consultant.
Manufacturing materials
We make “Massage table -1” for the Turkish bath from hard foam plastic. Polystyrene foam is ideal for use in rooms with high humidity, it does not rot, does not absorb moisture, and is vapor-proof. All you have to do is install the sun loungers in the room of the future hammam, install insulation in them, reinforce them and decorate them with mosaics or marble. The reinforcement and the slab under the heated floor distribute the load on the foam so that it will not sag, even if a very heavy person plops onto the sunbed with all its might. Another advantage of polystyrene foam is ease of processing. After all, if you need to round or process corners, make cuts or holes, this can easily be done with ordinary carpentry tools and a mesh sandpaper for plaster.
Insulation
We'll make it for free under the heated floor. A 45 mm recess is provided for water heating, and 25 mm for electric heating.
Steam nozzle tunnel
The manufacture of tunnels for steam nozzles is paid additionally, the cost is 500 rubles / piece. Usually they order a tunnel in a lounger near the floor, measuring 250 by 250 mm. You indicate the exact location of the tunnel, depending on where you have the steam line exit from the steam generator.
Delivery
1. Pickup
accessible from the cities: Moscow, Saratov, Krasnodar, Yekaterinburg, Barnaul. Immediately after production, our consultant will contact you and provide the address where you can pick up your table.
2. Delivery
to all cities of Russia, Belarus and Kazakhstan is carried out transport companies(term: 3-7 days). Knowing the volume, weight and dimensions of your order, our consultant will be able to calculate the cost of delivery to your city.
Need a table own design?
It is comfortable to relax in a hammam if time-tested materials and technologies are used in its construction. Your or your designer’s imagination can be fully realized, because in our production we will produce the designs that you have in mind.
Order a calculation of non-standard furniture for the hammam
Where is it used?
In the Turkish bath (hammam), by the pools, in SPA salons.
Download “Installation instructions for hamam”
Why should you buy from us?
Own production, highly qualified specialists, many years of experience, proven technologies, proven materials. With us you will receive professional consultation and assistance in planning the premises and selecting suitable furniture for the Turkish bath. Our consultants are always in touch and will provide comprehensive information on what, how and in what sequence needs to be done when building a hammam. Together with massage table No. 1 you will receive detailed instructions installation and installation supervision by telephone at all stages of the construction of a Turkish bath.
Vostok Capital LLC - everything for the construction of Turkish baths, hammams and saunas: benches, benches, shelves, deck chairs, massage tables.
If you have the skills professional builder in many specialties, this will not be difficult for you. Must be proficient in plastering, metalwork, power and low voltage electrical, plumbing, finishing work and ventilation. If you don’t have these skills, it’s better to turn to specialists. And one more rule. The hammam must be built by one person \as they say, a turnkey hamam\, from start to finish. Only in this case you will receive a quality product.
I don't think I'll open it terrible secret of all the hammam builders, that in Russia no one builds REAL hammams. Everyone is building steam baths. They are distinguished from truly Turkish ones by the heating temperature of the floor and benches - 45-50 degrees. Walking on such surfaces and sitting, in my opinion, is not very pleasant. The real hamam\historical\ even had special wooden shoes. Steam was formed there due to evaporation from heated surfaces and its amount was noticeably lower than in “our” hammams. And yet, our hamams are pleasant and useful.
Ventilation for Turkish bath
The issue of ventilation is very important when building a Turkish bath. As a rule, this causes “stupor” among ventilation workers and customers. In high humidity and lack of supply and exhaust ventilation Being in a bathhouse is not comfortable, and it’s simply harmful. Specific requirements for the ventilation line are 100% moisture resistance up to the vertical shaft of the exhaust shaft and as few straight sections as possible. Moisture resistance will ensure that there are no leaks along the route itself. Optimal solution- individual release of used air. Discharge height above roof according to general requirements chimney channels. A steam separator wouldn't hurt. If a fan is needed, then access to it must be provided and the fan itself must be moisture resistant. The ideal solution is to lay a channel up to a vertical shaft, using sewer pipes with a diameter of 100 mm, with a slope towards the hammam. A drip line is also needed to drain condensate from the ventilation system.
Turkish bath lighting
Lighting for a Turkish hammam must meet the main requirement - electrical safety, therefore, lamps with a voltage of no higher than 24 V are used and have a degree of protection of at least IP 65. Lamps of the “starry sky” type lead to higher construction costs, they themselves are not cheap and the work is labor-intensive \, are installed after finishing and require installation in the ceiling space, and for my “taste” this is a very controversial lighting option. Special LED spotlights have appeared, 
which, in addition to light, also make the ceiling more attractive due to shadows.
Well, another option is this LED strips regular and RGB. The result is very cool, if you make a slight mistake in choosing a mosaic\ it happens, they choose one thing, but when you put it down, it’s not at all\, then these tapes will fix everything and create amazing effects, and what’s more, you get pure light therapy, but... . All manufacturers write operating temperatures up to 40 degrees C.... So, in the final case, you'll be lucky or unlucky. Of course, I want to surprise the Customer with something, but in reality you need to clearly understand that this applies to all tapes, even IP 67..., so lighting a hammam is always a sore point and headache. And no one knows how long the LED strip will last. This problem should be treated as a consumable material - you change burnt out light bulbs - and so it is with the tape.
In general, moisture-resistant lamps are a sore point. The choice of these is extremely small, so you need to look for your own lighting solutions for each bath. Alternatively, see the "Moroccan trinkets" section.
But if you look in “non-core” places, you can find many options for solving this problem.
Hammam walls
Originally, the walls of the hammam represent multilayer construction. The initial material of the walls is solid brick \preferred\ and, as an option, foam concrete, tongue-and-groove slabs 80 -100 mm. Many Customers install ceramic slotted bricks and there are enough problems with them - there are a lot of mechanical fastenings in the wall structure, but there is practically nothing to attach to. The walls must be plastered cement mixtures strictly in the vertical and corners; any deviations lead to difficulties in installing wall insulation. Penoplex insulation, LUX element, WEDI panels, Russpanel are applied to the plastered walls, and to be honest, the insulation can be anything, even “grandmother’s” old coats, as long as it provides the specified heat capacity of the wall. The best of them is the LUX element \in my opinion\, the possibilities of this material are almost limitless. All details on this material can be found on the manufacturer’s website. A thermal contour made of plastic pipes\ type Rehau \ or electric heating cable, then a steel mesh, which becomes a heat shield that evenly distributes heat over the surface, does not give a “zebra” effect and a load-bearing basis for subsequent plaster. Usage steel mesh mandatory, since the average load per 1 m2 of wall is about 100 - 150 kg. And this plaster needs to be done with especially high quality, since all the “punctures” in the plaster will “come out” during finishing work with mosaics.
By the way, there is another little used material. This material is especially good in wooden houses, can greatly simplify the “life” of builders and save space. This is foam glass. Regarding environmental friendliness and fire safety, this is generally....., i.e. there are almost no analogues. We build walls from this material and immediately use it for heating pipes or electric heating cables, plaster, waterproofing and everything... the only drawback is the “poor” list of material thicknesses, and the price tag for it is slightly off the charts. Well, the dome is, again, only polystyrene foam like LuxElements.
Benches and table of the Turkish bath
The main requirement for benches, in my opinion, is their height - 450 mm and width - 600 mm. At this size you can sit and lie down. This is optimal minimum dimensions, but in general, if there is an opportunity to make it wider, feel free to do it. In the hammam, people mostly sit “with their feet up” on a bench or lie down, so there won’t be any excess. These dimensions provide comfortable sitting conditions and are sufficient for lying down. From a “design” point of view, I like it better when the benches are “airy” - they have niches and light under their feet. “Chest” type benches are boring and cumbersome. Also, I personally don’t like the “anatomical” type benches - this is a purely domestic invention. You can sit on such a bench in only one position, and if there is no provision for water drainage, then you will simply sit in a puddle... and naturally you won’t be able to lie on such a bench. The design of the benches itself follows the design of the walls, the same layering and thermal contour. Well, in my opinion, the massage table should be large, single or double, and should not be located in the steam room. Such tables require a lot of space and are mainly suitable for hammams larger than 9 m2 on the floor, and this “whim” leads to an additional increase in construction costs. In a “real” hammam, in the steam room itself, there is no massage table, it is present in the “common” room, and that’s where the massage takes place. But!... If you have space and money, then such a table is good to use as a large sun lounger on which you can lounge at ease. Everything is fine in the hammam, but lying a little hard, especially with your head on the marble. There is a solution - Turkish pillows under the head for the hammam. They are moisture resistant, bright, comfortable.
Turkish bath ceiling
The ceiling, or rather the dome of the Turkish bath, is the highlight of the hamam. The main requirement for the ceiling\dome\ is the absence of flat parts\horizontal planes\. They "give" drops, which are very irritating.
The dome structure can be framed, frameless, or cast concrete. The basis of options 1 and 2 LUX ELEMENTS, WEDI\made in Germany\, Russianpanel. The shape of the dome is limited by the imagination of the “designer” and the skill of the performer. A very skilled plasterer is required. The shape can be - Carriage, Sphere, Ellipsoid, Skullcap and variations on these themes; offhand you can come up with about 10 dome shapes, but the final version can be accepted only after inspecting the premises. In addition to a great plasterer, you also need an equally great metal structure installer and, of course, the designer himself to come up with all this, and I forgot about the mosaicist. After plastering works waterproofing is carried out and then fine finishing. For me, so frame system, gives both rigidity and shape and manufacturability. This is what the dome looks like before the Sphere thermal insulation.
Cleaning the hammam
Finishing is the Customer's imagination and the art of mosaicism. You can use tiles, mosaics, marble, glass, ceramics, and marble itself in the form of slabs. In my opinion, it is better to cover the benches with a marble slab. The floor covering must be non-slippery, so the use of polished marble is not advisable. You can see the capabilities of “my mosaicist” in his photo gallery. The glue must be naturally moisture-resistant and white in color, since the mosaic is translucent. I prefer two-component glue from Mapey-Kerakrate, but Lately I started using Litokol with latex. The glue is time-tested and reliable. But the grout, only Mapei \ for my taste\ - they are hard and do not wash out. Epoxy grouts are not recommended for use due to the strong heating of surfaces, although Mapei guarantees that its grouts are heated to 80 degrees. according to S. But the price of this “pleasure”..... greatly upsets the Customers.
Qurna in the hamam
According to history, a kurna is a bowl for ablution; it is a solid marble bowl without a centralized drain. Today, the qurna can be in the form of a solid marble bowl or a free-form cast bowl made of concrete. I recommend from LUX ELEMENTA, in the wall finishing material, the shape is arbitrary. Qurna turns out to be individual, in the singular. And if you add oriental tiles or tiled panels to the interior, the result will be very presentable. Such a kurna must be equipped with a drain so as not to scoop out the water with your hands.
Equipment for Turkish bath (hamam)
On the market of equipment for Turkish hammam baths there are: steam generators from TYLO - Sweden, HELO, SAWO, HARVIA - Finland, KLAFS, EOS, Hygromatik - Germany, Korea, Italy, Americans have begun to appear. My recommendations are TYLO. Time-tested, reliable, high quality and relatively inexpensive. After the last equipment modernization in 2007, they had the opportunity to replace tens. This is very reliable equipment, in all the time I have been working with this equipment, I have not encountered any failures or I have to try very hard to break them. The only requirement that must be strictly fulfilled is “soft” water, but this applies to all manufacturers of steam generators. Steam generators from the German company Hugromatic appeared, of two types - electrode and shadow. The first ones are good for “bad” water, but the electrodes “work”\lifetime\ differently and can fly out after 3 months, but in general it depends on your luck, in short, you need to get used to what it is consumables and don't make a tragedy out of it. But the first and second ones cost twice as much as TYLO - so it’s up to you to decide. There are also “German “EOS”, but they are even more expensive.
Steam generators TYLO
Choosing a room for a hammam.
As a rule, the choice of premises is carried out by the architect-designer according to the residual principle, while some “designers” have no idea what a hammam is and without consultation with specialists this can greatly complicate “life” for everyone. Any specialist in Turkish baths will issue technical requirements to the hammam premises and the technical room, where the hammam equipment is located. Approximate Dimensions for this room 1000x300x Height to the ceiling of the room \WxDxH\ in mm. Everyone is brought here technical highways, and this “cabinet” can be placed horizontally and “driven” under the ceiling, freeing up much-needed space at hand and eye level. Correctly drawn up technical specifications are a guarantee reliable operation the entire structure as a whole.
Doors for hamam
For hamam any glass door won't do. The door must meet the requirements for safety, heat resistance, functionality, and not cause aesthetic irritation. The TYLO door meets all these qualities. If you really want to have frosted door, then TYLO realizes this desire, though to order.
The range of doors is sufficient for any premises. The other doors are cheaper, but the look and functionality... but this is again my opinion and nothing more. Yes and more. If you have a sauna and hammam nearby, then TYLO offers two identical doors in design, but different in functionality.
Heating in a Turkish bath
The hammam must have heated surfaces in contact with humans. These are walls, floors, benches and a massage table. It is better if these surfaces are heated separately. Heating is carried out 2 ways - water and electrical cable. I recommend water in all cases. The coolant is present in 90% of baths under construction. To regulate the heating, I use the “warm floor preparation” system, which makes it possible to visually control the heating using dial thermometers, this is convenient and reliable. Regulation is carried out “according to the quality” of the coolant, i.e. by temperature, not by quantity. As a rule, adjustment is carried out once when starting up the hammam and they do not go there again.
With the hammam configuration "the hammam is higher technical room"\one above the other\, there may be a problem with the air in the heating system. It is necessary to provide valves to bleed the air in the serviced space.
In the case when a hammam is built in a city apartment, where there are always problems with heating, there are always two solutions - you can use an autonomous heating unit using electric boilers and heating electric cable. Both are autonomous, safe and make it possible not to depend on an external coolant. The boilers are shadow - they require attention\ since this is also a “kettle with a computer”\- scale and of course the location and additional electrical power. A third solution has appeared in the apartment - an autonomous water electric unit for 2 kW 220 V, i.e. heating the hammam with water, which is heated in the unit itself. Very compact and reliable. 
Recently, induction vortex boilers have appeared. What makes me happy about them is the lack of scale. Heating is carried out by eddy currents, i.e. The coolant does not come into direct contact with the heating elements. True, you have to pay for convenience and reliability... They cost half as much as the shadow ones.
Cable heating requires very neat installation, an excellent plasterer, especially on vertical surfaces, since voids in the plaster will cause local overheating of the cable and subsequently dismantling the finishing surface and its restoration is terrible.
Sewerage
The sewage system in the bathhouse must be equipped with a drain with a locking device to prevent the penetration of odor, the so-called drain with a dry seal. The kurna bath should not have a direct drain into the sewer; I recommend draining the kurna onto the floor, all for the same reason - odor penetration. Drains type HL, VEIGA.
Waterproofing and thermal insulation
Waterproofing, like thermal insulation, is carried out over the entire internal surface of the bath. Waterproofing must meet the requirements of the pool. Inexpensive waterproofing is not a solution for a hammam. Thermal insulation polystyrene foam building slabs, for example LuxElements.
Steam generator nozzles
Firstly, each steam generator includes two nozzles \applies only to TYLO\. Moreover, they are safe - there will be no burn if you come into contact with them. What I mean is that many people suggest buying nozzles made of polished stainless steel \ of course it shines, but it heats up to the temperature of a stream of steam, which is 100 degrees...\. Well, the last thing is the placement of the nozzle. Wherever they are placed... I am especially surprised by the “obsessive” idea of placing nozzles in benches, in such square “holes”. Sitting near them is simply dangerous; the temperature of the steam jet sometimes even destroys the benches themselves over time if these “holes” are poorly made. Designers have no idea about them at all. My recipe is to place it in the least accessible place, not a walk-through place.
In order for the Turkish bath to be truly comfortable, you need to buy a hamam lounger. This section presents several interesting models sun loungers and seats. Here you can study the characteristics and purchase a massage table.
Due to the increase in demand, entrepreneurs have become increasingly interested in the idea of oriental design for a steam room. Moreover, such a holiday has its own characteristic features.
Why does the price of a Turkish bath lounger increase every year?
Everyone knows the fashion boom in oriental flavor that came to Europe several decades ago. It also reached Turkey, where Russian tourists go so often. On a foreign side, it is often possible to borrow something close to the heart, for example, a bathhouse. And it’s even rarer to bring it to life. Fortunately, the cost of a polystyrene foam lounger allows you to realize your wildest ideas.
Previously, when people uttered the word “hammam”, they could not think what it was, and the eastern steam room was something unusual and inaccessible. However, in our time, only a stingy man would not send his beloved lady to the hammam so that she could improve her skin and health. And he himself will be happy to keep her company.
If you are the owner of a commercial establishment, then it makes sense to buy a massage table for the hammam not in one, but in several copies.
Turkish steam room equipment
There are crazy personalities on the planet who organize hamams right in their own homes. country houses. They motivate this by health problems. But passion for the fashion movement plays an important role in this process. The steam room with oriental traditions is different from Russian and Finnish. If there is a rapid heartbeat in those, and the air is dry and hot, then there is a wonderful atmosphere, the skin does not dry out, and the temperature is ideal even for people with cardiac diseases.
In addition, you can equip the room according to your taste and capabilities. The cost of the hammam seat presented in our catalog is quite moderate for this level of quality.
History of origin
Having been selling seats for Turkish baths for a long time, we understand that the reason does not matter at all, be it popularity or poor health, but this type Bani is gaining momentum in the northern regions and becoming more and more popular.
Let's talk about how this design came into being. The beginning was made in antiquity, when the Roman people invented public baths. Evaporation was obtained by pouring boiling water onto the floor of stones. It contributed to the removal of harmful substances from the body. Today, when the sale of polystyrene foam seats and other accessories has become widespread, construction has become much easier.
Operating principle
A similar system is used in the classic hamam: it does not contribute to loss of consciousness and burning, but serves in a good way relax and have a good time. Temperatures are lower, humidity is higher. Such conditions are much easier to tolerate than a classic Russian bathhouse. All you have to do is equip the place correctly: build round ceilings, think through the heating system, buy a massage table for the hammam, and welcome guests!
Why the cost of a polystyrene foam lounger is justified
The sauna effectively warms up and heals the body thanks to the combination of low temperature and high humidity. How to arrange such an overseas miracle in your salon or outside the city?
It doesn’t cost anything to think up anything, conduct experiments and read a bunch of books to create something new. Everything has already been tested by the eastern people, the company “Fitorodnik” and hundreds of satisfied customers. You just need to study this section of the catalog to understand this. The cost of sitting for a hammam cannot be compared with the profit that can be made by sending a flow of customers there.
Accommodation
Before you start building the eastern steam room, you need to see if it is possible to place it, if the area allows it.
First comes the dressing room, where the temperature reaches thirty-five degrees. It prepares for blissful pleasure in the steam room. After this is the main part, where heat, and you need to stay here a little longer. That's why we not only deal with couches, but also sell seats for Turkish baths.
Next, a transition is made to a special recess, where the temperature rises to one hundred degrees. Then there is a compartment with cooler air in order to cool down a little. Naturally, in each of the described spaces, a thrifty owner will need sun loungers to accommodate guests.
Ending a session
Having completed the procedure, they go to the rest room, and then everything, as elsewhere, is washed. At the end, the client is provided with massage therapy on a warm bed. In this room it makes sense to place a specialized massage table for a Turkish bath, the price of which is highlighted in our catalog. A steamed and relaxed body will best accept massage treatments; they will have a greater effect.
Typically, a hammam includes three types of water tanks, each of which has a certain water temperature. We not only sell polystyrene foam seats, but also hot tubs, steam generators and related products. From us you can buy a balanced set of equipment for full-fledged work.
Features of the hamam
We understand: everything that was listed above, plus swimming pools - at least not the entire area would be taken up by such pleasure. The price of a massage table for a Turkish bath is a trifle. Naturally, no one builds huge structures, since this is very impractical. Usually the building is much more modest, but retains all its advantages. During construction, you need to learn about some features. Such as the fact that the ceiling in the steam room should have the shape of a dome, and this is inevitable, so that the drops formed from such a temperature do not drip on the head, but flow down the walls. Pipes should be laid with warm air to heat the floor, and of course, you should provide decent steam and buy a lounger for the hammam.
What equipment, in addition to a lounger for a Turkish bath, will be needed?
Currently, there is equipment called a steam generator, it creates the necessary steam and required quantity. The generator power reaches fourteen kilowatts, and the amount of steam depends on the size of the steam room. The price of such a device can be found by calling the indicated telephone numbers or by going to another section of our catalog.