Valves (gates) electromagnetic solenoid DANFOSS

In our company you can buy solenoid valves Danfoss from Denmark. Danfoss has factories around the world, including in Russia, so delivery to the end user takes place as soon as possible. Increased attention is paid to questions of quality of execution of valves. Certification of solenoid valves according to European standards makes their operation reliable, throughout the entire service life. Thanks to special alloying additives and the latest valve body materials, high corrosion resistance is ensured. The installation of explosion-proof and intrinsically safe solenoid coils on solenoid valves (valves) makes their use safe for refrigerants, oils, fuels or gases. Danfoss fuel and water solenoid valves can use special solenoid coils with different levels of protection and minimal power consumption.

Manufactured by Danfoss (Denmark)
The product is certified. Warranty 1 year

Catalog of Danfoss solenoid valves - download >>

Solenoid valve (valve) EV220B

For water, air, oil;
Body: brass; Membrane: NBR, on request EPDM;
Working temperature: -10… +90 о С;

vendor code

DN,

Thread,

inches

Kv,

m 3 / h

∆ Pmin ,

Solenoid valve (valve) EV250B

Use "NC" - closed, in the absence of current; Spanish "NO" on request;
With forced lift diaphragm, direct action;
For air, water and steam of low (up to 4 bar) pressure;
Body: corrosion resistant brass; Membrane: EPDM;
Working temperature: -30… +140 о С;
Mounting on internal thread;
Coil: 220 V, 50 Hz, 10 W, complete with plug.

Danfoss EV250B Valve Specifications

vendor code

DN,

Thread,

inches

Kv,

m 3 / h

∆ Pmin ,

When ordering coils for 24 V, 50 Hz in the code number, the last two digits "31" must be replaced with "16" or "02" for DC 24 V DC coils.

Solenoid valve (valve) EV225B

Use "NC" - closed, in the absence of current;
For air, cold, hot water and steam;
Body: corrosion-resistant brass, resistant to dezincification;
Consolidations: a membrane - PTFE, a saddle - stainless steel;
Working temperature: -10… +185 о С;
Mounting on internal thread;
Coil: 220 V, 50 Hz, 10 W complete with plug.

Danfoss EV225B Valve Specifications

vendor code

DN,

Thread,

inches

Kv,

m 3 / h

∆ Pmin ,

Use "NC" - closed, in the absence of current;
With water hammer protection and pilot channel filter;

Mounting on internal thread;

Danfoss EV220B Valve Specifications

vendor code

DN,

Thread,

inches

Kv,

m 3 / h

∆ Pmin ,

* On request, for neutral liquids at Tmax = 90 ° C, with a DC 12 V coil.

Solenoid valve (valve) EV220B

Use "NO" - open, in the absence of current;
With water hammer protection and pilot channel filter;
For water, air and other non-aggressive liquids and gases;
Body: brass; Membrane: EPDM; at the request of NBR;
Working temperature: -30… +120 о С;
Mounting on internal thread;
Without coil. Coils and plugs must be ordered separately.

Danfoss EV220B Valve Specifications

vendor code	DN,	Thread, inches	Kv, m 3 / h	∆ Pmin ,





					Solenoid coils and plugs Important! The value of ΔPmin is the minimum differential pressure (pressure difference between inlet and outlet) required to actuate the valve to open or close. No differential pressure required for EV250B, zero pressure trip! The Kv value is the nominal capacity at 1 bar. The actual fluid flow through the valve is calculated by the formula, see reference information>> Sale of valves is carried out as a set - the electromagnetic valve together with the coil, and separately. High unification of components, coils and spare parts allows to reduce the delivery time of the equipment and to choose the optimal set. Also in our company you can buy a timer - a time relay, for the operation of the valve in automatic mode. This page shows only the main types of Danfoss solenoid valves. You can get a full Danfoss 2010 price list and additional technical information by contacting our company managers.

Cases and coilsDanfoss solenoid valvesusually shipped separately and assembled on site.
Assembly is quick and easy, without the use of tools, ensuring optimal design flexibility and ready to go. Replacing the coil is done without stopping and draining the system.
Solenoid valves can also be supplied assembled on request.

Danfoss EV210A, Compact 2-way direct acting solenoid valves

EV210A is a large group of small size direct acting on/off two way solenoid valves for use in industrial equipment.
The compact design, combined with an extensive range of coils, allows the EV210A to be used in a wide variety of industrial applications.

Two-position two-way
Compact dimensions
・Direct acting
DN 1.2 - 3.5
G 1/8 to G 1/4

EV210A Direct-operated 2/2-way compact solenoid valves	EV210A valve, stainless steel	Solenoid valve EV210A NC - 1.5B G 18F	Solenoid valve EV210A - 1.2B G 18E
solenoid valve EV210A - spareparts	Solenoid valve EV210A 1 2 3 5 SS - 2,5SS G18E	Solenoid valve EV210A without coil	Solenoid valve EV210A NO - 1,5B G14E

Specifications for EV-210A Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps
	normally closed			direct action











							Stainless steel
							Stainless steel
	Normally open
	Normally open

Danfoss EV220A, 2-way servo solenoid valves

Two-position two-way
With servo
DN 6 - 22
G 1/4" to G 1"
Brass valve body
NC (normally closed) and NO (normally open) options
Threaded connection according to ISO 228/1 or with NPT thread

EV220A Servo-operated 2/2-way solenoid valves	EV220A solenoid valve NC - normally closed	Solenoid valve EV220A	Solenoid valve EV220A NC - 6B G14N
Solenoid valve EV220A without coil

Specifications for EV-220A Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h
	normally closed			Servo
								1,600







	Normally open



	normally closed
	Normally open

Danfoss EV220A with filter, 2-position, servo-actuated, two-way solenoid valves

EV220A Servo-operated 2/2-way solenoid valves w/ filter

The EV220A is a series of compact, servo-operated, two-position, two-way solenoid valves specifically designed for use in machines and equipment where space is limited.
The built-in replaceable filter ensures long-term trouble-free operation even in the presence of impurities in the working environment.

Two-position two-way
With servo
Built-in replaceable filter
DN 11
G 1/2"
Brass valve body
NC (normally closed)

Specifications of EV-220A solenoid valves with filter

Danfoss EV310A, Compact 3 position 2 way direct acting solenoid valves

EV310A is a large group of small direct acting on/off, three way solenoid valves designed for use in industrial applications such as control valves.

· Three-position two-way
・Direct acting
DN 1.2 - DN 3.5
G 1/8" to G 1/4"
Valve body made of brass or stainless steel

EV310A Direct-operated 3/2-way compact solenoid valves

EV310A Direct-operated 3/2-way compact solenoid valves without coil

Specifications for EV-310A Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h
	normally closed			direct action




	Normally open

Danfoss EV210B, Direct acting 2-way solenoid valves

EV210B is a large group of direct acting on/off two way solenoid valves for universal use. EV210B is a series of extremely reliable high performance valves that can be used in harsh operating conditions.

Two-position two-way
Enhanced Performance Series
・Direct acting
DN 1.5 - 25
Valve body made of brass or stainless steel
NC (normally closed) and NO (normally open) options
ISO 228/1 from G 1/8" to G 1"
UL Listed NPT Thread (EVI) Option

EV210B Direct-operated 2/2-way solenoid valves	Solenoid valve EV210B 3B NO BB clipon - 3B G 14E	Solenoid valve EV210B SS without coil	Solenoid valve EV210B 1 5 4 5 SS - 1.5SS G 18E
	Solenoid valve EV210B NC - 3B G 14E	Solenoid valve EV210B - 3B G 14F	Solenoid valve EV210B - BY coil
Solenoid valve EV210B - 25 B G 1E	Solenoid valve EV210B - 6B G 14E	Solenoid valve EV210B - 2 B G 18N	Solenoid valve EV210B - 1.5B G 18E
Solenoid valve EV210B - 3 B G 14N	Solenoid valve EV210B - spareparts	Solenoid valve EV210B - 1.5SS G 18N	Solenoid valve EV210B SS BB Clipon - 3SS G 18E
Solenoid valve EV210B without coil	Solenoid valve EV210B - 8B G 38E

Specifications for EV-210B Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h	Coil voltage
	normally closed			direct action					-
									-
									-

									-
									-

									-
									-

									-

									-

									-
	Normally open								-
									-
									-
	normally closed						Stainless steel		-


									-

									-
									-
									-
									-
									-

Danfoss EV220B (series 6-22), 2-position, servo-actuated solenoid valves

EV220B 6-22 is a group of two-position, two-way, servo-actuated solenoid valves with threaded connections from 1/4" to 1".
This group is intended, in particular, for manufacturers of serial equipment requiring strength at moderate flow rates.

Two-position two-way
With servo
DN 6 - 22
Valve body made of brass or brass resistant to selective corrosion
NC (normally closed) and NO (normally open) options
Threaded connection according to ISO 228/1 or with NPT thread (EVSI and EVSI-U)

EV220B (6-22 series) Servo-operated 2/2-way solenoid valves	Solenoid valve EV220B 6-22 BYcoil - BY240CS	Solenoid valve EV220B- 10B G 12E	Solenoid valve EV220B NO - GP208/240J
Solenoid valve EV220B 6-22 10B	Solenoid valve EV220B -22 NC NPT	Solenoid valve EV220B - 12B G 12N	Solenoid valve EV220B 6-10 NO

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h	Coil voltage
	normally closed			Servo					-
	normally closed								-
	Normally open								-
	Normally open								-
	normally closed								-
									-
									-
									-
	Normally open								-
	normally closed								-
									-
									-
									-
									-
									-
									-
									-
									-
									-
							Brass resistant to selective corrosion		-
							Brass resistant to selective corrosion		-

Danfoss EV220B (Series 15-50), 2-position, servo-actuated, two-way solenoid valves

EV220B (15-50 series) Servo-operated 2/2-way solenoid valves

EV220B 15-50 is a group of universal servo actuated on/off two way solenoid valves.
The valve body, made of conventional brass, corrosion-resistant brass or stainless steel, allows for a wide range of applications.
Built-in pilot filter, adjustable closing time and protection class up to IP67 ensure optimum performance even under critical conditions.

Two-position two-way
With servo
DN 15 - DN 50
Valve body available in brass, selective corrosion resistant brass
NC and NO options
Threaded connection according to ISO 228/1 or NPT (EVSI and EVSI-U)

With water hammer protection
Option with adjustable closing time available

Specifications for EV-220B Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h	Coil voltage
	normally closed			Servo
									230 V AC current


									230 V AC current

									230 V AC current

									230 V AC current

									230 V AC current

									230 V AC current
							Brass resistant to selective corrosion		-
									-
									-
									-
									-
									-
	Normally open								-
	Normally open								-
	normally closed								-
	normally closed								-
	Normally open								-
	Normally open								-
	normally closed								-
	normally closed								-
	Normally open								-
	Normally open								-
	normally closed								-
									-
									-
									-
									-
	Normally open								-
	Normally open								-
	normally closed								-
	normally closed								-
	Normally open								-
	Normally open								-
	normally closed								-
									-
									-
									-
									-
									-
									-
									-
									-
	Normally open						Stainless steel		-
									-
									-
									-
	normally closed								-
									-
									-
									-
									-
									-
									-
									-

Danfoss EV220B (series 65-100), 2-position, servo-actuated, two-way solenoid valves

EV220B (65-100 series) Servo-operated 2/2-way solenoid valves

EV220B 65-100 is a group of on/off two way solenoid valves designed for use in heavy duty industrial applications with high flow rates. Features of such a valve are a cast-iron body and a flange connection.
The water hammer protected design and built-in pilot filter ensure reliable operation over a long period.

Two-position two-way
With servo
DN 65 - 100
Cast iron valve body
· Flange connection
Operating pressure up to 10 bar
Max. working environment temperature: 90° C

Specifications for EV-220B Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h
	normally closed	Weld Flange 2 1/2"		Servo
		Weld Flange 3"
		Weld Flange 2 1/2"
		Weld Flange 3"
		Weld Flange 3"

Danfoss EV222B, Two-position, 2-way, servo-actuated solenoid valves with isolating diaphragm

EV222B Servo-operated 2/2-way solenoid valves with isolating diaphragm

EV222B is a group of pilot actuated solenoid valves designed for use with dirty or corrosive media.
The valve body made of stainless steel, the isolating diaphragm protecting the electromagnetic system from contamination, the built-in pilot filter, the adjustable closing time, and the degree of protection up to IP67 ensure reliable and successful operation.

Two-position two-way
With servo
insulating membrane
DN 15 - DN 50

Normally closed version only

Specifications for EV-222B Solenoid Valves

Danfoss EV224B, 2-way servo operated solenoid valves for high pressure

EV224B Servo-operated 2/2-way solenoid valves for high pressure

EV224B - two-position, two-way, high-pressure solenoid valve, indirectly operated, with a servomotor, designed for use at operating pressure up to 40 bar and medium temperature up to 60 °C; available in normally closed and normally open versions:
The built-in pilot filter included as standard, adjustable closing time, and protection rating up to IP67 (depending on the coil) ensure reliable and successful operation.

· For high pressure pneumatic systems (up to 40 bar);
Two-position two-way, with servo
DN 15 - 20
NC and NO options
Brass valve body
Built-in filter to protect the pilot system
Based on proven EV220B technology

Specifications for EV-224B Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h
	normally closed			Servo
	Normally open
	normally closed
	Normally open
	normally closed

Danfoss EV250B, 2-way positive lift solenoid valves

The EV250B positive lift valve can operate from zero to 10 bar differential pressure. This group of on-off two-way valves is primarily intended for use in closed circuits with low pressure drop at medium flow rates. The valve body, made of brass resistant to selective corrosion, ensures a long service life even in aggressive steam environments.
The EV250B valve is compatible with a wide range of Danfoss coils, ranging from IP00 to IP67. Working medium temperatures up to 140 °C (low pressure steam).

Two-position two-way
forced lift control
DN 10 - DN 22

NC (normally closed) and NO (normally open)
From zero differential pressure
Particularly suitable for closed circuits as well as tank drain systems
Available on request with WRAS, VA and UL approvals
threaded connections according to ISO or NPT

EV250B Assisted lift operated 2/2-way solenoid valves	Assisted lidt operated solenoid valves, type EV250B NO (normally open)	Assisted lift operated solenoid valves, type EV250B NO 3/8 with coil	Assisted lift operated solenoid valves, type EV250B NO 3/4 with coil
Assisted lift operated solenoid valves, type EV250B NC with coil	Assisted lift operated solenoid valves, type EV250B NC	Assisted lift operated solenoid valves, type EV250B NO

Specifications for EV-250B Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h	Coil voltage
	normally closed			Forced lift			Brass resistant to selective corrosion		230 V AC current







									230 V AC current
									-
									-
									-
									-
									-
									-
									-
									-
	Normally open								-
									-
									-

Danfoss EV260B, Motorized 2-way proportional solenoid valves

EV260B Servo-operated 2-way proportional solenoid valves

EV260B - a group of proportional (smooth characteristic) two-way solenoid valves with servomotor, with threaded connection from 1/4" to 3/4".
By modulating the coil current, the armature can be moved to any position in the armature tube, and the valve is moved to any position from fully closed to fully open.
When the coil current reaches its maximum value, the valve is fully open.

Proportional (with a smooth characteristic)
For smooth flow control
2-way
With servo
DN 6 - 20
Small time constant
Linear characteristic over the entire control range
Closes in case of power failure (fail safe)
Coil protection class IP67
Supply voltage 24 V DC

Specifications for EV-260B Solenoid Valves

Danfoss EV310B, Direct acting 3-way on-off solenoid valves

EV310B is a large group of direct acting 3 position 2 way solenoid valves for universal use.
EV310B is a series of very rugged, high performance valves that can be used in any type of harsh working environment.

· Three-position two-way
・Direct acting
DN 1.5 - DN 3.5
Brass valve body
Threaded (from G 1/8" to G 3/8") or flanged (32x32 mm) connections
NC (normally closed) and NO (normally open) options
Manual override options

EV310B Direct-operated 3/2-way solenoid valves

EV310B-without-coil

Specifications for EV-310B Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h
	normally closed			direct action






		Flange 32 mm
	Normally open

Danfoss EV215B, 2-position, direct-acting solenoid valves, for steam

The EV215B is a direct acting on/off two way solenoid valve designed for use in steam applications.
The design is based on the conventional Danfoss concept for high performance direct acting valves, but the valve disc is made of PTFE, ensuring reliable operation even with contaminated steam.
The valve body made of stainless steel ensures a long service life even in aggressive steam environments.

Two-position two-way

・Direct acting
DN 3
G 1/4"
Stainless steel valve body
Only NC option
Threaded connection according to ISO 228/1 or NPT (EVSIS 3)

EV215B Direct-operated 2/2-way solenoid valves for steam

Solenoid valve EV215B SS without coil

Solenoid valve EV215B NC NPT

Specifications for EV-215B Solenoid Valves

Danfoss EV225B, 2-position, servo-actuated solenoid valves, for steam

EV225B Servo-operated 2/2-way solenoid valves for steam

The EV225B is a servo operated on/off two way solenoid valve designed for use in steam applications.
Its design is based on the use of a fluoroplastic membrane, which ensures reliable operation even when working with contaminated steam.
Corrosion-resistant brass valve body and stainless steel valve seats ensure a long service life even in aggressive steam environments.

Two-position two-way
Specially designed for steam applications
With servo
DN 6 - DN 25
G 1/4" to G 1"
Corrosion-resistant brass valve body
NC (normally closed)
· ISO 228/1 or UL listed option with NPT thread (EVSIS)

Specifications for EV-225B Solenoid Valves

Order code		Compound	Hole size	Exploitation	Mat. seals	Pressure drop [bar]	Mat. corps	kv m3/h	Coil voltage
	normally closed			Servo	fluoroplast		Brass resistant to selective corrosion		230 V AC
									230 V AC
									230 V AC


									230 V AC


									230 V AC

									230 V AC

Represents one of the leading leaders in the manufacture of solenoid valves. The entire range of solenoid solenoid valves of this manufacturer includes both direct-acting valves and valves with a floating membrane, that is, with a servo drive, as well as combined solenoid valves with forced lifting of the membrane mechanism. The pressure drop for their operation is usually in the range of 0...40 bar and they are equipped with fittings in sizes G 1/8...4 inches.

Danfoss solenoid valves are simply the ideal solution for controlling the flow of gaseous or liquid media such as air, water, glycol, steam, light oil products and more. Solenoid valves, and the principle of their operation is described on the page - “Electromagnetic valves”, can be supplied to customers complete with their coil. In addition, it is possible to order the body of the valve itself and the coil to it separately from each other, with the help of which it is possible to provide the widest choice of parameters for their functioning. Danfoss valves are extremely reliable and most convenient to use the device, due to the various technical innovations embodied in them.

Usually, coils and bodies and coils of such valves are supplied to customers separately, well, and then, at the place of their installation, they are assembled together. Their assembly itself is quite fast and simple, does not require the use of any tools, which ensures excellent flexibility of the entire structure and its quick readiness for its activities. It is quite possible to replace the coil without draining and stopping the entire system. At a separate request of customers, Danfoss solenoid valves can also be sold to them already assembled.

Varieties of Danfoss valves

One of the many varieties of valves is an electromagnetic three-way valve, which makes it possible to adjust the flow of controlled liquids to mix its components into one or, conversely, to divide into several streams, usually two or three.

Another type of such valves are shut-off valves, mounted to prevent accidents on pipelines. Such mechanisms are quite capable of very quickly stopping the flow of gas, air or liquid through the pipeline being serviced.

The solenoid valve, with its unusual name, evokes various associations in an ordinary layman. In fact, this is an ordinary shut-off valve, only improved, instead of manually opening it, it turns on automatically through a timer or when a switch connected to it is pressed. Why is he still salty.

Danfoss solenoid valve

An electromagnetic (solenoid) valve is an electromechanical device that serves to open and close the jet of the medium necessary for operation - liquid or gaseous. It is constructed from two components: a solenoid (electromagnet) with an iron core and an ordinary valve with a hole for the flow of liquid or gas, and a part in the form of a disk or piston to block the flow. When power is applied to the coil, the core is drawn inward under the influence of the formed magnetic field, while the system opens or closes.

According to their design features, they are divided into normally open or closed. It depends on how current is supplied to the coil. Interestingly, a normally open valve, if current is supplied to it, closes, and a normally closed valve, on the contrary, opens.

One of the manufacturers of such fittings is Danfoss. The solenoid valve of the Danish concern is successfully used by many enterprises, they serve in a wide variety of industries.

Where is the Danfoss solenoid valve used?

The scope of their application is very diverse. The Danfoss direct acting valve is small in size, which makes it popular in a wide variety of industries. They are, for example, installed in liquid and suction lines, equipping hot gas pipelines with fluorinated refrigerants.

The Danfoss control valve is used in heating, heating and cooling pipelines. It can limit the flow of the working medium, blocking the passage of the liquid, when it approaches the flow level mark, the installed control diaphragm maintains the indicated pressure drop.

The material from which the cases are made is chosen based on the industrial environment in which it will be used - in aggressive or neutral. Due to special alloying additives to the body materials, it has a high resistance to corrosion. Solenoid coils are manufactured explosion-proof and intrinsically safe, making them safe for refrigerants and oils, various fuels or gases.

Therefore, the Danfoss solenoid valve has found wide application in domestic heating and water supply systems, as well as in centralized air conditioning networks. This is due to the fact that, having an acceptable price, like others, they are significantly ahead of them in quality and strength.

Benefits of a Danfoss valve

The Danfoss solenoid valve is versatile and can solve almost any task of controlling the flow of liquid and gas. Its operation is independent of the pressure drop in the system, having a seal that is reliable when working with water, air and oil. The mechanism has a high level of opening even at zero pressure drop.

The Danfoss solenoid valve offers the best water hammer damping of the competition. This leads to a reduction in noise and vibration, as well as a longer service life of the remaining parts - which ensures the reliability of the system. Its advantage is the combination of price and quality.

This article covers only the main aspects of this Danfoss product. You can find out the full characteristics and the necessary technical information by contacting our company that sells this product, which is certified according to European standards. Therefore, the operation of these solenoid valves is reliable, for a long service life.

Solenoid valves provide the simplest way to control and regulate the flow of liquid and gaseous media. Solenoid valves are the ideal solution for media with a limited content of impurities and with a wide range of flow changes, from low to high values.

Outstanding performance - your advantage

1: Snap Coil

The snap-on coil mounting system makes mounting the valve simple and secure. If necessary, a hermetic seal can be ordered to protect against moisture ingress.

2: Wide range of coils up to IP67

A wide range of coils with degrees of protection from IP00 to IP67 provides an optimal technical solution for various applications.

3: Effective water hammer protection

Controlled damping in the final closing stage, optimized diaphragm and equalization bore shape reduce water hammer in all Danfoss valves to as little as 1.5 bar (according to EN 60730-2-8, test pressure 6 bar).

4: Long service life and improved performance

The service life of the valve is significantly increased due to the special shape of the membrane, which helps to reduce the level of internal stresses in the rubber. In addition, this special diaphragm shape ensures optimum flow characteristics.

5: Dirt resistant

The coaxial filter protecting the valve control unit has a self-cleaning function. The leveling hole is easily cleared of dirt in case of clogging.

Danfoss valves are available in brass, DZR dezincification resistant brass and stainless steel. The standard brass version is used in moderate corrosive environments, while the other two materials are ideal for use in more aggressive environments.

Valves electromagnetic solenoid danfoss. Solenoid valves Danfoss (Danfoss)

Valves (gates) electromagnetic solenoid DANFOSS

Solenoid valve (valve) EV220B

Solenoid valve (valve) EV250B

Solenoid valve (valve) EV225B

Solenoid valve (valve) EV220B

Danfoss EV210A, Compact 2-way direct acting solenoid valves

Danfoss EV220A, 2-way servo solenoid valves

Danfoss EV220A with filter, 2-position, servo-actuated, two-way solenoid valves

Danfoss EV310A, Compact 3 position 2 way direct acting solenoid valves

Danfoss EV210B, Direct acting 2-way solenoid valves

Danfoss EV220B (series 6-22), 2-position, servo-actuated solenoid valves

Danfoss EV220B (Series 15-50), 2-position, servo-actuated, two-way solenoid valves

Danfoss EV220B (series 65-100), 2-position, servo-actuated, two-way solenoid valves

Danfoss EV222B, Two-position, 2-way, servo-actuated solenoid valves with isolating diaphragm

Danfoss EV224B, 2-way servo operated solenoid valves for high pressure

Danfoss EV250B, 2-way positive lift solenoid valves

Danfoss EV260B, Motorized 2-way proportional solenoid valves

Danfoss EV310B, Direct acting 3-way on-off solenoid valves

Danfoss EV215B, 2-position, direct-acting solenoid valves, for steam

Danfoss EV225B, 2-position, servo-actuated solenoid valves, for steam

Varieties of Danfoss valves

Danfoss solenoid valve

Where is the Danfoss solenoid valve used?

Benefits of a Danfoss valve

Outstanding performance - your advantage

1: Snap Coil

2: Wide range of coils up to IP67

3: Effective water hammer protection

4: Long service life and improved performance

5: Dirt resistant

Danfoss valves are available in brass, DZR dezincification resistant brass and stainless steel. The standard brass version is used in moderate corrosive environments, while the other two materials are ideal for use in more aggressive environments.