DIY beauty from tires. Tire crafts

There are different ways to arrange “your” suburban area. Of great interest are the ideas of creating original objects from old things that have served their intended purpose.

Craftsmen make furniture from wooden pallets, polypropylene pipes, plastic and wine bottles. New uses are also being found for old car tires. They make armchairs, tables, ottomans and even sofas. Practical and durable furniture is used in the garden, to furnish the garage, and as an unusual accent in the interior.

Tires can be used without coating, but more often they are painted in bright colors, wrapped in jute, sisal, linen, cotton or hemp rope, and tied with fabric.

The rubber of car tires contains toxic substances, so you should not use it in a child's room or in a poorly ventilated area. But even without this, there is enough space left for improvement: in the living room of a private house, on the terrace, in the garage and utility room, in the open air.

Low ottomans for the garden and home: soft, comfortable and practical

The simplest thing that can be made from used car tires is comfortable ottomans for relaxing and gathering with friends. They can be in the form of “tablets” covered with thick rope or with fabric upholstery on legs. Let's consider several manufacturing options.

First, the tire is wrapped diagonally with a thick cord crosswise to block the through hole. Then completely cover the circumference. To do this, the rope is twisted in a spiral starting from the center of the hole blocked by the cord. The rope is fastened with a glue gun.

In another option, 2 plywood disks of the appropriate diameter are used to close the holes in the center. They are attached with self-tapping screws. Next, the structure is wrapped with a thick rope, fixed with hot glue.

You can make a soft ottoman covered in fabric. To begin with, make blanks from a plywood sheet to cover the holes. Then a foam strip is glued to the side of the tire along the entire circumference.

Using a screwdriver, screw the plywood disk from below. Next, they cover the tire with thick material, fastening it with a construction stapler. Legs or wheels are screwed to the bottom plywood.

The remaining disk is wrapped in foam rubber and covered with fabric. The resulting lid is placed on top. It can be fixed with glue.

Several fabric-covered ottomans can be used to create a cozy seating area.

Tall poufs in the dining area of a private house

The two tires are connected with bolts or screws from the inside. Next, the structure is painted or left as is.

A wooden circle made of MDF or chipboard is nailed on top, which is also painted, and soft bedding is laid. Also, a wooden circle can be covered with foam rubber and fabric.

An excellent set will be made from high poufs and a table. The table is made according to the same principle, only its height is twice as large. Casual painting with white paint while maintaining a contrasting black tread pattern gives the furniture a stylish look.

Ottoman boxes for storing small diameter tires

Wide tires of small diameter are suitable for making designer boxes for handicrafts and storing small items. Their production is similar to the creation of ottomans, only in addition to the outer lining, attention is also paid to the interior decoration.

Plain fabrics are used for interior decoration, and bright fabrics with patterns and colors are used for exterior cladding. Such cute interior items will be a good idea for a business.

Armchairs with wicker

Instead of simple poufs, you can make chairs with a back and armrests. The backrest rail is also attached with bolts or screws. Armrests can be made from strong, thick, varnished branches. When the structure is assembled, begin to close the holes in the center.

In addition to the methods already listed, you can use weaving. To do this, holes are made in a circle using a drill in increments of no more than 5 cm (more often possible). Subsequently, a strong rope or cord is threaded through the holes using an awl, intertwining each longitudinal row with a transverse one. You can experiment with the pattern, especially if you have weaving skills.

Curved steel tubes can be used as armrests. And for weaving, instead of rope, use soft wire.

You can make a bench out of single chairs by connecting two sections with a common wooden frame.

A few more original ideas for making armchairs and sofas

You can make spectacular designer furniture from tires and scrap materials. Here's some evidence.

“Car”-chair made of 4 tires on a metal or wooden base. The techniques already described above are used in production. All elements are connected with bolts.

Low armchairs on legs with a soft back in the Art Nouveau style will fit perfectly into the interior of a spacious living room. To make one, one tire is cut in half along its diameter. This part will serve as the back.

A strip of thick foam rubber is glued inside. To ensure that the back is beautifully raised, two slats-racks are nailed in the center.

For the seat, a wooden disc is cut out and lined with foam rubber. Then cover all the foam with leatherette. Screw on the back and seats and the chair is ready!

The next option is done in a similar way. Only for the backrest a wide tire is used, which is attached tightly, without slats.

For a chair with a high back, the support will be thick wooden slats, which are covered with a piece of foam rubber and covered with fabric. As a result, the product does not even have a brutal base. Everything looks elegant and stylish.

For the garden, a chair with a wooden back is left without upholstery. Even without painting it looks very aesthetically pleasing.

As a backrest, you can use several tires connected to each other and placed on an edge. They can be attached to the tire that serves as the seat using cables or elastic springs. Further techniques for transforming waste material into a comfortable resting place can be suggested to you by your imagination or our illustrative example.

Another interesting option for a chair for a private home made from large tires. In this case, a segment is cut out of the tire, a soft seat is arranged at the bottom, and the inner walls are sheathed, and they serve as a backrest. A stylish combination of materials and a selection of fashionable prints will allow you to get an excellent youth chair for watching TV.

The sofa will require passenger car and van tires. Solid tires are used for the base, and cut sectors are used for the back and sides.

Eco-leather or coarse wear-resistant fabric can be used as lining. This sofa can be placed in the garage or on the spacious terrace of a private house.

Round coffee tables

Tires are also used to create an unusual coffee table. There are many ideas: on wheels, with or without legs, with a glass or wooden surface, painted or natural.

The option with a gold plated finish on chrome legs and a glass tabletop looks harmonious if it fits into the color background of the interior.

The option with a wooden tabletop and wenge-colored legs is perfect for a classic style. The legs are screwed to the lower wooden disk, and the tabletop is fixed with hot glue.

Custom solution for the bathroom

The tire can also be used as a base for a round sink. This way you can equip a bathroom in a private house or an open washbasin in a country house.

The selected ideas demonstrate the breadth of use of car tires in creating original furniture for home and garden. Having mastered the basic principles, you can develop your project and surprise with new ideas.

Turning used items into various pieces of furniture and decor has long become the norm. Many people no longer look at old tires, pallets and plastic bottles as garbage, but solely as building material. Perhaps, after reading our article, you will also join them, because today we will talk about what amazing crafts from tires you can make with your own hands.

How to make crafts from tires with your own hands.

Let's start with not just beautiful, but with beautiful and useful. From used tires you can make many functional things for your garden plot.

How to make garden furniture from tires with your own hands - master class.

Old tires need to be washed and cleaned. For cleaning, you can use a special tire cleaner - this will give your tire a shiny black appearance.

We paint the side surfaces of the tire with acrylic paints. For a more interesting look for garden furniture, we can cover the side surfaces of the tires with leatherette and paint it.

To get rid of the gloomy black color, first paint our entire workpiece white. Then we apply our drawing with colored paints. And finally, add clear dark contours to the drawing.

For the middle of our ottoman we make a round pillow. In order to apply color painting on black leatherette, fill the space under the design with white paint, and then apply a colored pattern on top of it.

How to make an ottoman with a knitted cover from an old tire - master class.

If for garden furniture made from tires its resistance to weather conditions was important to us, then for a gazebo or terrace we can make another beautiful version of an ottoman made from tires.

We attach the legs to the tire that has been cleaned of dirt.

We knit the side surface for our ottoman. If you don’t know how or don’t want to knit, you can use parts of an old sweater for these purposes.

We fasten the knitted fabric to the tire from the side and bottom. We close the top hole in the tire with a circle of plywood.

We crochet the round knitted piece for the top of the ottoman with the side piece.

Interesting options for crafts made from tires.

There are other simple options for tire garden furniture. We can stack tires on top of each other and use scraps from the top of the tire to make seats and armrests.

Or another version of furniture made from tires. Wooden spacers are inserted into the tire halves and a soft roll is sewn in - so you have a comfortable seat for the chair.

Tire crafts for children.

It is easy to make devices for playgrounds from tires. For example, here is a simple swing.

Or a car that will not leave any child indifferent.

DIY flower beds made from tires.

Very often, old tires are used to create flower beds and outdoor flower pots. So to speak, cheap and cheerful. The flowerbed can be given a more decorative look by arranging its edges in a more interesting way.

To make such a flowerbed, you should mark the side of the tire as shown in the photo. And then just cut along the line.

The cutting process itself can be tricky. Ideally, this is best done with a jigsaw. If you are cutting with a knife, then lifting the cut with a wooden peg will make your work much easier.

The cut tire must be turned out. It's easier to do it together. But you can turn out the tire alone by stepping on the edge of the tire with your foot and turning out the other edge with your hands.

Such flower beds can be varied and original - this is what helped them gain great popularity. The most famous option is to place the tire on a stand that we previously cut from its top.

Today people are trying to decorate their yards, summer cottages and gardens with whatever they can. Designers received a lot of ideas that can be safely translated into reality. The use of such improvised materials as used tires has led to the fact that in the gardens and vegetable gardens of the plots there are real masterpieces made by hand.

It is worth noting that garden crafts can decorate any area. It could even be a sandbox in the yard, a flower bed, a swing or garden beds.

For example, to make a flowerbed from a car tire, you don’t need to guess too much. You just take a used tire and fill it with earth. But it won't be a masterpiece. Now, if you take paints, decorate the outside of the tire, or even better, put three wheels - one on top of the other - then you will get a real masterpiece.

If you want to do something unusual, you can take tires of different diameters. With the largest one, we start laying out the rubber from the bottom.

You can even fix an impromptu flower bed to a tree. To cover the tire on one side, you can use any material that can support the weight of the earth.

photo: DIY tire parrot

Dreamers even came up with two cups that are made of tires and stand on the site. The main bowl is cut out, and the handles can be made of metal tape.

Another idea is animal figures made from used car tires. They will put your guests in the mood in the garden or garden.

The most popular figurine in garden crafts is the swan. To make a bird, you will need a tire that does not have a metal cord.

This will make it easier to cut the rubber. We are marking our future crafts. We cut the tire with a very sharp knife or hacksaw. To strengthen the swan's neck, use metal rods. At the end we paint the bird.

From old car tires you can make a turtle, a zebra and even a horse. To make a beast, you need to dig a beam into the ground along with a tire. In order for the animal to look like itself, it is necessary to apply certain colors with paint.

Furniture made from car tires will look great on a summer cottage. You can even create comfortable options using various soft linings. Everything that can be useful in this craft is used. If you like to relax in the garden in the evenings, then several personal chairs that can be placed close to each other are best suited.

There can be no difficulty in making crafts. Let's imagine, and it will take you no more than an hour to do everything. There is no need to take thick and rough tires, the reinforcing fiber of which can cause wounds.

Each of us remembers a swing made of car tires in the garden from childhood. Pastime then was not complete without a swing. And now you can make crafts with your own hands from old tires. It is worth noting that a swing made of tires will be safer for a child than one made of wood or metal. So, what do you need to make a tire swing? First, we find a branch that is strong and slopes toward the ground. Secondly, we collect the following tools: a knife, a hacksaw, rope or chains and the tires themselves.

We make a loop at the end of the rope. You need to make sure that the knot is strong. We place the tire vertically. The rope is passed through the wheel and tied firmly above the ground at a height of a meter.

DIY flower beds in the garden

The real fun for kids is the tracks and different paths that can be made from tires of different sizes. You can make a regular path on the site out of tires. To do this, you will need large tires - for example, from a truck. It is only necessary to cut off the part with the tread, and then spread the strips on the area, additionally securing it to the ground.

Photo: borders for vegetable beds and flower beds in the garden

Photo: multi-level strawberry beds

DIY paths in the garden

DIY crafts - flower beds

Content

Modern applied art has no boundaries, so any available material is suitable for its implementation. Thus, for arranging a summer cottage, the garden area of a house or a playground, decorative products are created from tires. It is easy to make original flower beds, flowerpots, pieces of furniture and animal figurines from rubber.

How to make crafts from wheel tires with your own hands

In the hands of a creative person, a car tire can find a second life as a landscape decoration. To create crafts from tires, you only need to have imagination, a desire to create, and tools: a sharp knife, household gloves, paint and chalk for marking contours. Before starting the creative process, it is advisable to make a sketch of the future object on a piece of paper, and then mark the contours on the tire. The manufacturing process does not take much time, the instructions are simple, and the result is a masterpiece.

Automotive tires are ideal for outdoor spaces because they can withstand any weather conditions with ease. Charming crafts can decorate your dacha or playground for several years in a row. However, the rubber gets too hot in the sun. This fact should be taken into account when creating furniture on which you plan to relax in the summer. Crafts made from old tires require virtually no maintenance - they only need to be washed occasionally with soapy water.

Interesting DIY crafts made from tires for the garden

Modern summer residents strive to show creativity not only in the garden, but also when designing their backyard and garden. They make their site more well-groomed, beautiful and original. Crafts made from car tires can not only be decorative, but also become a practical and useful item for the household. A car tire is a practical material at hand, from which it is easy to make an original thing even for a person who has never encountered manual work before.

Rubber tires are used to create adorable animal figures. By taking one or a pair of tires, making slits in the right places and where necessary, bending them, you can get a bear, frog, giraffe, caterpillar, crocodile, donkey, dog, elephant or turtle. If you wish, you can create a cartoon character in the form of a minion, Luntik, matryoshka, car or Fixies. Additional parts of the craft are made from plywood. At the end of the creative process, crafts made from tires are painted in bright colors and placed in the yard for everyone to enjoy.

If you don't know what you can do from old tires, then start with a flower bed. Flower fences made from tires are the easiest way to decorate your garden. If you show a little imagination by cutting and turning out the rubber, you can create original flowerpots or flowerpots into which soil is poured and plants are planted. Summer residents often use tires as a compost pit, placing one tire on top of another. Attractive swings, sandboxes, steps, fences, chairs - machine tires that have been given a second life are suitable for these products.

Tire chair

Tires can be adapted to interesting furniture, which will definitely come in handy at the dacha and will become an attractive novelty for all guests. It will not just be a rubber structure, but a comfortable recreational item for a terrace, veranda or open space. To create a chair from tires you should take:

old car tires – 2 pcs.;
flexible plywood - board measuring 100x90 cm;
foam rubber - a couple of pieces: thick and thin;
felt;
tools: screwdriver, self-tapping screws and furniture stapler.

If you have all the necessary components at hand, then it’s time to start making garden furniture:

One car tire is placed on top of another, they are fixed together with self-tapping screws.
A piece of felt of appropriate size is attached to the bottom of the potential product, that is, to the bottom tire, using a stapler. Thanks to this element, the chair can be easily moved on the floor covering.
The plywood that will serve as the back is bent and secured to the tires using a self-tapping screw.
After this, you need to cut out circles from foam rubber. We make one from thick material along the outer diameter of the tire, and a couple of others from thin material. The large circle is inserted into the inner part of the tire, which is located on top. Thin circles are placed on top of the tire to provide comfort to the product. The parts are fixed with a stapler.
The back is being processed. Thin foam rubber is placed over the plywood.
The final touch is a cover made of quilted material.

DIY tire ottoman

What can be made from old tires? An ottoman will be an exclusive solution for the garden and home. It can be done in a simple way, but for this you should take:

car tire;
strong thread in the form of twine or hemp rope;
a piece of plywood, enough for a couple of laps;
tools in the form of screws and a glue gun;
coating varnish.

An ottoman made from tires will be an interesting design solution for arranging a modern interior, because the piece of furniture is not only beautiful, but also comfortable. The manufacturing process is as follows:

Circles of plywood are placed on the bottom and top of the tire and secured with self-tapping screws.
We begin to decorate the upper part of the ottoman, which will consist of twine. Thanks to the glue gun, the rope or cable is fixed to the plywood turn by turn according to the snail principle, starting from the center. This is done until the tire is completely closed.
Upon completion of the creative process, the twine is coated with varnish, which will protect the product from the negative effects of environmental factors, such as moisture.

Tire swans for the garden

Animals, birds and aquatic life made from car tires look amazing. Thus, swans made from used tires are a chic work of art. To make them you should take:

old tire;
white chalk;
paint (preferably water-based);
jigsaw, drill, screws;
plate.

The process of making crafts is not the most difficult, but it requires consistency and care during work:

Make a sketch on the prepared tire, drawing the swan's head in the form of a 9X2 cm rectangle, starting from the beak. Then they draw a neck on the tire, which extends from the head and occupies more than half the circumference of the tire. Straight lines are drawn carefully so as not to fall into the cut. The tail line will be in the beak area and will take approximately twenty centimeters.
They begin to cut out the swan, which is done with a drill and then with a jigsaw.
The tire is turned inside out, giving the silhouette of a swan. The widest part will be the support, which is turned inside.
The head and neck will not be supported without a solid support, so a plate should be attached to this area.
When the product is ready, it's time to start painting.

Decorative crafts made from wheels for the playground

What can you make from old tires on the playground? There are a lot of ideas that transform used items into beautiful products for decorating your yard. You can use old tires to decorate a playground, turning it into a fairy-tale town where kids will always have fun and interesting time to spend their leisure time. Winged swings, mini-sandboxes, animals, and cartoon characters made from tires will be a colorful addition to the recreation area for girls and boys.

Tire sandbox

Playing in the sand is a favorite activity for children on the playground. However, not every yard can boast of an interesting sandbox. A convenient and beautiful container for sand can be made from a KAMAZ tire. To do this, you need to fix the rubber on the selected area, carefully paint it and fill it with sand. The process of making a sandbox can be done together with your child; believe me, the child will be very interested in painting the future sandbox in different colors.

Children's swing made from tires

From an old car tire you can make not only a beautiful sculpture, but also a children's attraction. So, a swing made from a car tire will allow your child to have fun at the dacha. It is worth noting that they are less dangerous than wooden and metal models. There are many options for tire swings, but you should start with simple ones. First thing:

prepare an old machine tire;
take a sharp knife;
find a rope or chain;
then find a strong branch on the tree that will serve as a support.

The step-by-step process of making a homemade swing is not complicated. Initially, you should make a strong loop at one end of the rope, which you throw over the selected branch. Pass the other end of the rope through the wheel and into the loop. Hang the swing vertically, perpendicular to the ground at a level of ninety centimeters. The product is designed not only for children, but also for adults of moderate weight.

Sun made from tires and bottles

A sun made from bottles will decorate any playground or garden. To make such a homemade product, you will need a machine tire, a piece of plywood, self-tapping screws and half-liter plastic bottles that will serve as rays. To create a solid structure, you need to nail plywood onto the tire, screw bottles around the outside, paint it a couple of times with yellow paint, and draw the face of the sun on the plywood.

Video: what can be made from tires

Crafts made from car tires are an affordable and beautiful decoration that you can make yourself. In the skillful hands of a craftsman, unused car wheels are transformed into charming sculptures. Watch the video for step-by-step instructions and understand what can be made from tires. If you have a few unusable tires lying around in your garage, don't miss the opportunity to give them a second life by creating a few pieces.

How can you further improve the area adjacent to your home? Not everyone can afford the purchase of decorative landscape elements.

However, don't worry: It will be possible to give the territory an unusual look and at minimal cost. One of the ways to beautify your site yourself is with garden figures made from car tires. Used tires are available free of charge at most services. The only resource that will be needed in large quantities will be time.

At first glance, it seems that it will not be possible to achieve an interesting result, but the examples below can overcome a pessimistic attitude.

Original ideas for creating crafts from tires

Tires are a suitable material for realizing the most interesting ideas. Thanks to the fact that you don’t feel sorry for them, you can realize your ideas an unlimited number of attempts, after which you will definitely end up with funny country crafts from car tires. What non-trivial designs can be made?

Idea one: unusual flower beds made from tires

As a rule, dacha owners are concerned only with the functional side of these structures, so floral flower bed There is no way to make it out of an old tire. This solution looks dull and uninteresting. With a little effort, these products can be significantly transformed: you can make any image or object from old tires with your own hands.

To create an interesting combination you will need paint, a large knife, wire and a little imagination. Two flower beds can be placed opposite each other, depicting tea pairs. To implement the idea you will need 4 tires. To make the flower beds shaped like cups, rubber of a smaller radius will be used in the lower tiers, and larger tires in the upper tiers.

Additional elements of the composition can be made from the outer sidewalls of large tires. These pieces are enough to create a saucer rim, a smaller diameter tire base, and handles for the cups. It is advisable to fasten all parts of the structure with wire.

It is better to paint the resulting cups and saucers in bright colors. If the house has an interesting service, an enlarged copy of it on the site would be an excellent solution. The end result is an attractive bed of tires.

In addition to this composition, you can organize other unusual solutions: hanging tires with a nailed plywood base to a tree or folding them into interesting geometric shapes.

Flower bed made of tires. Video

Step-by-step photo of making a flower bed from a tire

Idea two: tire figures on the site

Although these elements do not carry a functional load, they will add warmth to the dacha. Hosts, guests and, most importantly, children will definitely smile when they see garden figurines from tires.

Inspiration for their creation can be drawn from cartoons, fairy tales and legends. They represent an inexhaustible source of fantasy. Using the simplest tools and available materials, you can create characters such as a fairy-tale frog, a swan princess or a steadfast tin soldier.

By cutting the tires in half and joining them in the shape of waves, you can get the Serpent Gorynych. However, it will take some work to get a better resemblance. From finely chopped parts of tires you can create the scales and head of this monster.

For greater resemblance to the original, it is better to attach additional elements from scrap materials to the figures.

Idea three: country furniture

You can’t ignore the option of making comfortable furnishings from tires. Inside the house, tables, armchairs and chairs will look interesting, the basis of which is rubber, upholstered on the outside with materials of different textures and colors.

The simplest items, such as ottoman, you can make it from old tires with your own hands, spending less than an hour on the process. The upholstery elements will be attached to each other inside the tire. You can also use plywood sheets screwed to the sidewall of the tire using a screwdriver.

The only important parameter is the state cord. If it sticks out, then it is better to use another tire, since sitting on such a pouf will be uncomfortable.

Video: garden furniture made from car tires

Step-by-step photos of making a pouf from a tire

Idea four: tire swings

Nothing can delight children as much as swing. The place in which they are installed inevitably becomes the center of attraction for the attention of all household members. By using tires to build a swing, you can significantly save on costs and provide better safety for small family members.

If there is a large tree on the site, then making this structure will not be difficult. For stability, the branch must be parallel to the ground and be ready to bear the load. The tools you will need are a jigsaw and a knife. In addition to the tire, you will need to find a strong rope or chain. If the latter is used, then you will additionally need carabiners to secure the tire.

In the case of using a rope, the procedure will be as follows:

A loop is tied on the rope, after which it is thrown over the branch;
The free end is inserted into the loop and tightened. You will definitely need to check the reliability of the node;
The lower end of the rope is threaded through a tire with the tread facing up;
After adjusting the comfortable height, tightening the knot on the tire and checking the strength of the connections, you can use the swing.

If children are still very young, it is recommended that their use of the structure be supervised by adults.

How to make a swing from a tire: video

There are also more non-trivial designs for swings made from tires in the country. From tire rubber you can cut out swings of the most unusual shapes, reminiscent of animals or fairy-tale characters.

Idea five: country paths made of tires

One of the most popular methods of “reincarnation” of tires that have fallen into disrepair is the creation of paths in the countryside. This method of use allows you to maintain cleanliness in a country house even in the most unfavorable weather conditions.

Compared to concreting, this option is not associated with huge costs. Another advantage of a path made from old tires is that it does not sink into the ground like gravel and will last a long time.

For fast work, it is better to choose rubber with the largest possible diameter. Such blanks will significantly reduce the time spent on making tracks.

In addition to tires, you will need wide boards, as well as screws or nails. The tool you will need to prepare is a large sharp knife, a screwdriver or a hammer.

The technology itself is not complicated and consists of the following stages:

Preparing rubber. Use a knife to remove the tire sidewalls. The remaining part is cut across the tread. The result should be a rubber strip. In this way you need to prepare the required amount of material;
Fastening rubber to wood. Using a hammer and nails, or a screwdriver and self-tapping screws, the existing strips are attached on top of the wooden base of the future path.
Soil preparation. If there has been no precipitation for a long time, you will need to fill the ground under the places where the boards are laid with water. The condition of the soil should ensure that the boards do not sink into the ground;
Laying elements. The placement of track parts must be approached responsibly. In order for the structure to last for a long time, you will need to carefully compact each part of it.

To give tire garden paths a more cheerful look, the rubber can be pre-painted. It is important that the coating is not slippery in winter or during rainfall. Otherwise there is a risk of injury.

A great idea would be to make do-it-yourself overlays for country stairs from old tires. This will give a more aesthetically pleasing appearance to old steps and prevent the risk of slipping.

The most popular ways to give a second life to old tires

There are truly a huge number of ideas for creative use of tires. However, there are a number of crafts and structures that are most often found at the dachas of compatriots. What is the most popular choice?

Pool made from an old tire

An interesting option is pool from an old tire. For such a structure, you will need to look for a large tire, used on a large tractor or special equipment.

Preparing a pool is not difficult. The work will consist of attaching a material to the tire that forms a sealed bottom, resting on a dense surface.

For work you will need the following materials and tools:

Waterproof material;
Glue for rubber;
Degreaser;
Putty-sealant;
Scissors.

Since the bottom of the pool will consist of thin material, you should select an installation location in advance that will not contain sharp stones, branches or other objects that could damage the bottom or cause injury. On the other hand, this area should not be soft. Otherwise, the glued material will probably come off along the seam.

At the first stage, you will need to prepare the surfaces of the elements to be glued at the place of their future contact. To do this, you will need to clean them of fat using any suitable means.

Next, the cleaned surfaces are lubricated glue and connect. At the same time, you should not feel sorry for it, since excess can be removed, and if there is a deficiency, the pool may leak. When the glue sets, you will need to turn the wheel over so that the seam is under pressure.

A day later, the place of contact from the inside of the pool is treated with adhesive sealant. After an additional 24 hours, you can fill it with water and enjoy bathing in hot weather.

DIY tire swan

This bird is one of the most common dacha figures. With sufficient perseverance, you can achieve interesting results. For the job, one car tire, thick wire, two small clamps supporting the swan's neck, as well as white and red paint will be enough.

The tool you will need is a jigsaw with the ability to cut metal threads, as well as a marker. To protect your eyes and body from sawdust generated when cutting cord, it is better to use thick clothing and work glasses.

The work will consist of the following parts:

Preparation tires for cutting. Using a marker, two semicircles are drawn in the center on one of the sidewalls of the tire, the top of which will serve as a blank for the tail and head;
cutting. It is carried out along the marked line when preparing the head and neck. The tail is cut in the shape of a triangle at the top of the sidewall, the sides of which go towards the tread. On the sides, between the tread and the drawn lines, three cuts are made for the wings.
Formation. In places where the side cuts are made, parts of the tires turn outward, forming wings. The tail arches in the same way. The wire is attached with two clamps to a long rubber strip at the base and at the top.
Painting. The main part of the figure is covered in white, and the beak will be red.

The result should be a swan that can be used as a flower bed. In addition to this option, there are other ways to make this figurine.

Video instructions on how to make a swan from a tire

Other interesting tire installations

If, as a result of an attack by rodents or winter cold, you had to cut off the branches of garden trees, you can improve the situation by temporarily making a palm tree from an old tire. To do this, you will need protectors separated from the tires, which can be shaped like tropical leaves. Surprise of neighbors will be guaranteed!

Separated from the sidewalls, the protectors, painted green, are very reminiscent of a crocodile. The image of reptiles can be complemented by an open mouth, for which sections of the protector can be secured in a characteristic way. It is worth cutting out triangular teeth from small fragments of rubber, painting them a light color and attaching them to the crocodile.

It won't be difficult to make an elephant. Even one tire is enough. Half of it will form the body, and the protector of the other part will become the trunk. The sides will make excellent ears. For tusks, you can use tire mounting elements.

Figures of turtles are also very popular. To a lying car tire, it is enough to attach 4 small tread elements that imitate paws, and the same parts for the head and tail. After painting, you will get an interesting flowerbed, reminiscent of a creature that is in no hurry.

Photos of country crafts made from tires

Tires standing in a row, cut in half, serve as very convenient bicycle parking. Elastic rubber will hold any size wheel.

If the old tire is on the rim, there is no need to remove it. After some work with a jigsaw, the wheel will become a reliable stand for an unusual flowerpot.