Wall mount for tablet. Best Wall Mounts for iPad

So you want to mount your tablet to the wall. There are many ways to solve this design challenge, including using the Belkin Kitchen Tablet Mount Holder for Mounting Tablets to Furniture and the FridgePad Magnetic Refrigerator Holder, but most of these solutions force you to spend a minimum of $20 to $50.

It's not obligatory.

Whether it's your kitchen companion or entertainment center, there's an inexpensive way to wall mount your tablet so its display remains easily accessible.

Easy way: Dockem ($10)

Dockem is a universal wall mount that fits almost any device (even smartphones). It's simple: clean the surface, place the device between the pads, sticky side back, and stick them to the wall. If you want to remove or move the mount, just carefully remove the brackets so that there is no debris left on the sticky side.

Let's match the interior of the room: a shelf for pictures from Ikea (249 rubles)

You call it a picture shelf, but we call it a tablet shelf. The solution from IKEA for 249 rubles makes it easy to blend the tablet with the rest of the room’s interior. After a quick setup, you'll have a permanent place for your tablet (and a few family photos).

The IKEA shelf is longer than necessary at 55 to 115 cm, but if you have good hands you can shorten it to the ideal size.

Unexpected hack: wire hanger for plates (100-150 rubles)

It's cheap, even a little funny, but you know what? It works.

One blog post at Tumbleweedlabs.com found that if a plate holder can protect an expensive piece of porcelain, it can probably handle a tablet too.

If you're looking for the fastest and cheapest solution, go to a hardware store and buy one plate mount (like this one). Just try to choose one where the wire is hidden in a plastic tube so as not to scratch the tablet, or the tablet can be hidden in a transparent protective case. From the link to the blog, everything is clear from the photographs.

Tablet brackets are functional mounts that allow you to fix the device at a certain angle and in a certain position on a table or wall. You can buy high-quality brackets at an affordable price in the Kron-Shop online store.

Range of models

Compact desktop and floor stands are on sale that secure tablets at a certain distance from the floor or table (the height can be adjusted).

Most models provide 360 ​​degree rotation of the tablet. The mounts securely fix the equipment thanks to special fasteners. Thanks to the brackets, you can fully work with this small equipment, read from a tablet, while your hands will be free.

The back walls of many stands have perforations, which ensures full ventilation and prevents overheating of the tablet. Many stands come with a special bag that can be conveniently used as a mouse pad. Most mounts are suitable not only for tablets, but also for small laptops.

In our store you can order high-quality and inexpensive brackets with a guarantee from the manufacturer, which indicates their reliability and long service life. We provide delivery in Moscow and other cities of Russia; to order, just call or leave a request in the form on the website.

In the modern world, it is no longer possible to do without various gadgets and equipment. So in the kitchen or in a small room, when we are bored and want to have fun, we watch movies on tablets. It’s also convenient when you don’t have to constantly hold the tablet in your hands. For example, it can be hung on the wall. You can learn how to quickly make a wall holder for a tablet right here in the video tutorial.

And all we need for such a design is:

• three hooks for clothes or towels;
• double-sided foam tape (if the hooks come without fastening);
• the tablet itself.

Hanging your tablet on the wall is actually very convenient. For example, as suggested in the video tutorial, you can do this in the kitchen. Imagine, when you are cooking or eating, you can watch your favorite films, and for children - cartoons. Despite the fact that you are not in a place intended for food and no garbage will remain, as can happen in the living room or bedroom.

To fix the tablet, take two hooks, stick pieces of double-sided tape on it (if there are none on the hangers in the initial version) and glue them to the desired place.

Place the tablet on these two hooks. Holding it, fix the third hanger on top, as shown in the video tutorial.

Take out the tablet and firmly secure all the hooks again. That's all. As we can see, the tablet can be easily removed and inserted into the mount.

There is no need for special brackets, which are not guaranteed to fit the size of your tablet; here you can determine the exact position.

Good day, we will actually talk about the controls of the “smart home”.

Initially, when arranging the controls for a smart home, a control panel was not planned. The idea came much later, when video surveillance was implemented in the corridor. Namely, when implementing the video peephole function. Demo video at the end of the review.

A 64 GB iPad mini was lying idle, an Apple product introduced in 2012, with a diagonal of 7.9 inches (IPS technology) Resolution 1024 × 768 pixels. With iOS 9.3.5.
Today it is a very weak tablet, ideal only for watching videos on the road or reading, due to its capacious battery. The processor is not enough for other tasks, even surfing the Internet is a dubious pleasure. On free message boards you can buy this device for 6-8 thousand rubles for 16gb

The idea for implementing the panel was spotted at the hitechbiding 2016 exhibition held in Moscow. But there are expensive solutions that I cannot call justified. In general, I started looking, but I didn’t really like anything, it was either expensive or the design didn’t suit me. Ultimately, I FOUND it and ordered it.

Having received and unpacked the parcel, I was a little puzzled, since this purchase does not look like the money spent on it. Red price 500 rub. For a piece of plastic. Because there is nothing more than instructions and a template!

Package


The frame itself


Back side (sorry for the photo quality)


Instructions


Trying on an iPad mini

I would like to note that the iPad fits tightly into the frame, in other words, when the structure is assembled, it is problematic to pull it out, keep this in mind if this is your main tablet. In my case this is not the case.

Actually, the installation process itself did not take me much time and labor; at the time of ordering, I already knew where and how. I did the renovation and planning myself, so I chose a place in a false wall. The actual photo is below.
Choosing a location.


Marking, template included


Drilling drywall. (I used a magnet to search for profiles)


Ready!




There was a socket nearby, which actually supplied power to the tablet.




Initially, I wanted to come up with some kind of clever fastening for this frame, so that in case of emergency it could be removed, but I didn’t bother, since I didn’t have the necessary components on hand, but I did have liquid nails!
In fact, the frame itself rests on them.


Fit tightly.


The actual final result is:






The power cord is located under the frame itself, it was necessary to trim the wall to fit it, which is not particularly convenient, of course.


The panel is always on, it doesn’t irritate you at night, it’s convenient

In principle, that's all.
Among the advantages, I would like to note the neat finished design that fits into the interior, even despite the black IPAD, and, accordingly, the IPAD as a control panel, with its display, AIRplay and other goodies (this is a separate topic).

The downside is of course the price! 1650 rub. the frame itself and 700 delivery. but in fact these are small things compared to analogues. Well, the fact that the IPAD, despite its age, has a fully serviceable battery and is now on constant power, there is a suspicion that the battery will die. (Correct me if I'm wrong, dispel the melancholy)

Well, the finale.
I prepared a video to help you understand what I wanted in the end!

All the best to everyone...

Return