Auto edge banding machine with glue tank, flexible, capable of working with melamine, PVC, ABS edges up to 3 mm and wooden edges up to 5 mm. A machine for professionals and workshops.
Advantages
Milling unit Includes: one engine; vertical flat copier for precise positioning of the tool at the processing site.
The unit is equipped with combined cutters with a diameter of 72 mm: the radius part of the cutter is used to give an edge radius of 2 mm and to remove overhangs on a thin edge. The straight part of the cutter is for removing overhangs on solid wood slats up to 5 mm thick. The transition from a radius edge to a solid edge up to 5 mm occurs by simply shifting the cutters. The thickness of the edge material is displayed on two indicators.- Gluing unit, feeding unit and edge rolling
Rapid heating bath for melting hot melt adhesive, equipped with a Teflon coating for easy adhesive replacement
Glue roller
Adhesive temperature controller integrated in PLC
Automatic glue recycling device
Mechanism automatic feeding roll edging with guillotine for cutting edges up to 3 mm thick
Rotating roll holder with a diameter of 730 mm
A block of two press rollers: 1 – steel and the second – rubber-coated
Mechanism for adjusting the input guide ruler to the thickness of the edge material with a position indicator
Switch for switching the glue bath to standby mode (temperature drop) if the machine is temporarily not in operation - Looping knot for finishing PVC/ABS edges up to 2 mm thick (3 mm on request).
The rigid design of the unit eliminates vibrations and, as a result, makes it possible to achieve High Quality processing.
Precision processing is ensured by front and vertical flat copiers (with polished chrome surfaces), which serve for precise installation of cycles at the processing site.
complete with cycles R = 2 m - Remote Control located on the workpiece supply side
Steel monoblock frame of increased stability and rigidity, guaranteeing preservation of working settings
Upper clamp in the form steel beam with rubberized roles
Special workpiece feeding conveyor
Manual mechanism vertical adjustment of the clamp with automatic reconfiguration of working units to the thickness of the slab
Indicator of the adjusted slab thickness
Additional roller support along the entire length of the machine
Separate outlet with aspiration pipe above the glue unit; centralized connections for other working groups
Protective cover
Electrical control unit with PLC (programmer), power switch with padlock, thermal relays
Emergency switch off button - Polishing unit
with two independent units for cleaning and polishing edges. S1 0.14 kW - 2800 rpm)
Units can be adjusted vertically and incline for customization optimal mode cleaning/polishing. - Trimming knot
With a trimming unit for cutting edge overhangs at the front and rear ends of the slab at an angle of 90°.
The saw's reach is adjusted to the thickness of the edge material using an adjustment mechanism with a position indicator.
Video review of equipment operation
Distinctive features
- Edge banding machine Minimax ME 25- automatic edge banding machine with glue tank, flexible, capable of working with melamine, PVC, ABS edges up to 3 mm and wooden edges up to 5 mm. Machine for professionals and workshops;
- Maximum flexibility: gluing edges, trimming with saw blades, removing overhangs; along with the ability to equip the machine with scraping and polishing units. Simple and precise: automatic positioning of all working units, synchronized with the pressure beam, based on the thickness of the part. High precision in feeding parts, thanks to a rubber-coated track. Easy to use with the control panel from the front of the machine;
- The control panel is located on the workpiece supply side;
- Steel monoblock frame of increased stability and rigidity, guaranteeing preservation of working settings;
- The upper clamp is in the form of a steel beam with rubberized rollers;
- Special workpiece feeding conveyor;
- Manual mechanism for vertical adjustment of the clamp with automatic reconfiguration of working units to the thickness of the slab;
- Indicator of the adjusted slab thickness;
- Dedicated channel for extracting glue vapors; centralized extraction of processing waste;
- Additional roller support along the entire length of the machine;
- Protective cover;
- Electrical control unit with PLC, power switch with padlock, thermal relays;
- Emergency buttons;
Working nodes
GLUE UNIT, FEEDING AND EDGE ROLLING UNIT:- Rapid heating bath for melting hot melt adhesive, equipped with a Teflon coating to simplify the procedure for replacing the adhesive;
- Gluing roller;
- Temperature controller for applied adhesive, integrated into PLC;
- Device for automatic return of unused glue;
- Mechanism for automatic feeding of rolled edges with a guillotine for cutting edges up to 3 mm thick;
- Rotating roll holder with a diameter of 730 mm;
- A block of two press rollers: 1 – steel and the second – rubber-coated;
- Mechanism for adjusting the input guide ruler to the thickness of the edge material with a position indicator;
- Switch for switching the glue bath to a low temperature mode (pause) after a certain time of machine downtime;
- Saw unit for cutting edge overhangs at the front and rear ends of the slab at an angle of 90°;
- The saw's reach is adjusted to the thickness of the edge material using an adjustment mechanism with a position indicator;
- Includes: one engine; vertical and horizontal shoe copiers for precise positioning of the tool at the processing site;
- For finishing PVC/ABS edges with a chamfer radius of 2 mm (3 mm on request);
- The rigid design of the unit eliminates vibration and, as a result, allows for high quality processing;
- Precision processing is ensured by front and vertical shoe copiers (with polished chrome surfaces), which serve for precise installation of cycles at the processing site;
BRUSH UNIT (ADDITIONAL OPTION):
- Two independent units for cleaning and polishing edges.
- The units can be adjusted vertically and inclination to set the optimal cleaning/polishing mode;
The machine carries out the following operations:
- automatic edge feed (feed unit);
- edge stickers (edging unit),
- preliminary trimming of the edge (first trimming unit)
- clean edge trimming (second trimming unit)
- milling to remove the upper and lower overhangs (milling unit)
- scraping (scraping unit)
- grinding (grinding unit)
Unit for automatically feeding material into a multifunctional edge banding machine.
Unit for preliminary trimming of edges, edge application (first trimming unit, edge application unit) in a multifunctional edge banding machine.
Milling unit for removing the upper and lower overhangs (milling unit) in a multifunctional edge banding machine.
The scraping unit (scraping unit) in a multifunctional edge banding machine.
Edge polishing unit (polishing unit) in a multifunctional edge banding machine
Main functional units:
1. Belt conveyor for feeding slabs.
2. Connector for connection to the pneumatic network
. 3. Niche for mounting pneumatic components.
4. Clamp height adjustment screw.
5. Output for connecting a hood.
6. Terminals for connecting to the electrical network.
7. Guide ruler at the entrance.
8. Front extension element of the work table.
9. Roll holder.
10. Protective cover.
11. Slab thickness indicator.
12. Guillotine for cutting edge material.
13. Overhang milling unit.
14. Edging material supply unit.
15. Edge material guide.
16. Control panel.
17. Unit for trimming end overhangs.
18. Group of press rollers.
19. Glue bath assembly.
20. Looping unit.
21. Brush assembly.
Figure 2. Main components of a multifunctional edge banding machine
Figure 3. Main components of a multifunctional edge banding machine
The package includes a device for automatic feeding of edge material and pre-
welding end trimming, end processing saw, milling unit for removing light
owls on the surface, scraping and polishing units.
BASIC EQUIPMENT:
- control panel from the workpiece entrance side;
- steel monoblock frame of increased stability and rigidity, guaranteeing preservation of working settings;
- upper clamp in the form of a steel beam with two rows of rubber-coated rollers arranged in a checkerboard pattern;
- workpiece feeding conveyor with a corrugated belt reinforced with internal metal threads;
- manual mechanism for vertical adjustment of the clamp with automatic reconfiguration of working units to the thickness of the slab;
- mechanical indicator of the adjusted slab thickness;
- additional roller support along the entire length of the machine;
- dedicated channel for extracting glue vapors; centralized extraction of processing waste;
- protective casing;
- electrical control unit with PLC, power switch with the ability to lock with a padlock, thermal relays;
- Danger button.
WORKING UNITS:
GLUE UNIT, FEEDING UNIT AND ROLLING EDGE.
Rapid heating bath for melting hot melt adhesive, equipped with a Teflon coating to simplify the adhesive replacement procedure.
Gluing roller with an inside heating element- to maintain a constant temperature of the glue.
Temperature controller for applied adhesive, integrated into PLC.
Device for automatic return of unused glue.
Automatic roll feeding mechanism
edges with guillotine for cutting edges up to 3 mm thick.
Rotating roll holder Ø730 mm.
Block of two press rollers.
Mechanism for adjusting the input guide ruler to the thickness of the edge material with a position indicator.
Switch for switching the glue bath to a reduced temperature (pause) mode after a certain time of machine inactivity.
increase
CUTTING UNIT.
with a saw unit for cutting edge overhangs at the front and rear ends of the slab at an angle of 90°.
The saw's reach is adjusted to the thickness of the edge material using an adjustment mechanism with a position indicator.
HORIZONTAL MILLING UNIT.
with a milling unit equipped with vertical and horizontal shoe tracers for installing the tool at the processing site.
The unit is equipped with combined cutters Ø72 mm: the shaped part of the cutter is used to remove overhangs with the formation of a rounded chamfer (radius 2 mm). The straight part of the cutter is used for removing overhangs from solid wood edges up to 5 mm thick.
To change from a shaped edge to a solid wood edge, simply move the cutters axially.
The edge thickness is read using two indicators.
CYCLE UNIT.
for finishing PVC/ABS edges with a bevel radius of 2 mm.
The rigid design of the unit eliminates vibrations and, as a result, allows for high quality processing.
Precision processing is ensured by front and vertical shoe copiers (with a polished chrome-plated surface), which serve for precise installation of cycles at the processing site.
A couple of scrapes are included (R = 2 mm).
The unit is equipped with a manual mechanism for retracting from the working position.
POLISHING UNIT.
with two independent units for cleaning and polishing edges.
The units can be adjusted vertically and inclination to set the optimal cleaning/polishing mode.
Automatic edge banding machine with glue tank, feed motor 550 W, glue unit motor 180 W, trim unit motor 370 W, milling unit motor 750 W, brush unit motor 140 W, mains voltage 380 V, temperature 190 degrees, work table 2600x530 mm , edge width from 65 mm
- Edge banding machine Minimax ME 25- automatic edge banding machine with glue tank, flexible, capable of working with melamine, PVC, ABS edges up to 3 mm and wooden edges up to 5 mm. Machine for professionals and workshops
- Maximum flexibility: edge gluing, trimming saw blades, removal of overhangs along with the ability to equip the machine with scraping and polishing units. Simple and precise: automatic positioning of all working units, synchronized with the pressure beam, based on the thickness of the part. High accuracy of parts feeding, thanks to a track with rubberized rollers. Easy to use control panel from the front of the machine
- The control panel is located on the workpiece supply side
- Steel monoblock frame of increased stability and rigidity, guaranteeing preservation of working settings
- Upper clamp in the form of a steel beam with rubber-coated rollers
- Special workpiece feeding conveyor
- Manual mechanism for vertical adjustment of the clamp with automatic reconfiguration of working units to the thickness of the slab
- Indicator of the adjusted slab thickness
- Dedicated channel for extracting glue vapors; centralized extraction of processing waste
- Additional roller support along the entire length of the machine
- Protective cover
- Electrical control unit with PLC, padlockable power switch, thermal relays
- Emergency buttons
GLUE UNIT, FEEDING AND EDGE ROLLING UNIT:
- Rapid heating bath for melting hot melt adhesive, equipped with a Teflon coating for easy adhesive replacement
- Glue roller
- Adhesive temperature controller integrated in PLC
- Automatic return device for unused glue
- Automatic roll edge feeding mechanism with guillotine for cutting edges up to 3 mm thick
- Rotating roll holder with a diameter of 730 mm
- A block of two press rollers: 1 – steel and the second – rubber-coated
- Mechanism for adjusting the input guide ruler to the thickness of the edge material with a position indicator
- Switch for switching the glue bath to reduced temperature mode (pause) after a certain time of machine downtime
- Saw unit for cutting edge overhangs at the front and rear ends of the slab at an angle of 90°
- The saw's reach is adjusted to the thickness of the edge material using an adjustment mechanism with position indicator
- Included: one motor, vertical and horizontal shoe copiers for precise positioning of the tool at the processing site
- For finishing PVC/ABS edges with a bevel radius of 2 mm (3 mm on request)
- The rigid design of the unit eliminates vibrations and, as a result, allows for high quality processing
- Precision processing is ensured by front and vertical shoe copiers (with polished chrome surfaces), which serve for precise installation of cycles at the processing site
BRUSH UNIT (ADDITIONAL OPTION):
- Two independent units for cleaning and polishing edges.
- The units can be adjusted vertically and inclination to set the optimal cleaning/polishing mode