Floor shelves for flowers with their own hands made of wood. Flower stand - how to make interesting and original projects with your own hands? (90 photo ideas) DIY wood flower shelves

- not an exception. At the same time, the abundance of vegetation causes inconvenience - there is nowhere to place them. How to properly place indoor plants so that the space is not overloaded?

Alternative solution - bookcase for placing flowers. This piece of furniture will allow you to install flowers not only in a convenient way, but also decorate the design in the garden or indoors.

Choosing a whatnot for flowers in the country

A characteristic feature of the rack is the placement of vegetation on different tiers in such a way that small plants are not obscured by large ones. Vertical shelving is especially suitable for climbing vegetation or for flowers with lush leaves.

Place large-stemmed flowers on top of the shelving, and lower small plants so they can be seen better.

Shelves come in all sizes, shapes and designs. Any of them will be in harmony with the style of the interior, both at their summer cottage and indoors.

The rack can be made from any material. For example, a metal bookcase is particularly strong and durable, it will not deform under the weight of the pots.
When choosing a rack, pay attention to its future location. If you decide to install the structure on the street, whatnots made of wood or chipboard can quickly become unusable because they are exposed to precipitation. However, such wooden shelves are great for indoors.

Forged shelving can be placed both outdoors and in the room. Such an item will complement the interior of the living room or bedroom, as well as decorate the garden area.

There are no difficulties in determining the place for the rack. It is important to take into account the predisposition of flowers to conditions: whether they like the sun's rays or, on the contrary, it is better for them to be in a shady area.
In the room, the rack should not take up much space. In this case, purchase or make your own corner bookcase. It is compact, you can put more plants on it. Wall shelves and shelves will also not interfere, do not clutter up the place.

As a rule, indoor flowers are placed on the loggia, window or balcony. Make the most of your space with shelving. For example, place a structure with shelves on the window, but keep in mind that there will be less light in the room, and the window frame will have to be opened by removing the rack from the windowsill.

Flower rack on the windowsill in several steps is also convenient. So the main area of the window through which light enters will not be blocked.

Compact stand-shelf can be placed on the balcony. Plants in pots are hung on them or flowers are placed on the shelves of the cabinet. Attach wheels to the rack for easy movement of the structure to other rooms.

To make a bookcase yourself, a failed ladder or stepladder will come in handy. This design is almost ready for use, you just need to fix it on a plane, remove chips and grind splinters, and paint it with paint.

If the stairs do not have wide steps, put simple boards on them, they will be shelves.

Shelving made of wooden material you can make it yourself from bars, boards and appropriate fasteners. A convenient whatnot is obtained from pallets. Turn them over and stack them on top of each other, arrange flowers and flowerpots.

With the help of shelving structures, you can not only save space, but also get a beautiful flower arrangement. If you have a "winter garden" - such an item is indispensable.

Shelves for flowers on the wall allow you to optimally place indoor plants, and their original look can decorate any interior. For many people, growing flowers at home is an exciting hobby, and therefore a home greenhouse requires a special approach. For all the beauty of plants, their accumulation does not always cause delight, but a beautiful placement on walls, shelves or in a window opening pleases the eye. Elegant shelves for flowers in themselves provide an attractive design for the whole apartment, and you can make them yourself with maximum imagination.

The essence of the problem

Everyone knows the classic version - flowers in the window, on the windowsill. Of course, it has the right to exist, especially since such placement is well suited to the plants themselves. However, you can diversify the interior of the room with the help of indoor flowers by distributing plants throughout the room. Supports of various types will help in this.

You can place home plants, in addition to the windowsill, anywhere, even hanging from the ceiling. To this end, there are many designs of devices based on various principles. Such varieties as wall shelves, racks, hanging systems, floor flowerpots, decorative flower stands on the windowsill, etc. have gained the greatest popularity.

Which option of flower stands to choose depends on many factors, but most importantly - on the preferences of the owner. In general, the chosen style of the general design of the room, the variety of plants, the size of the room, the illumination (including natural light), the purpose of the room, the requirements for plant care (in particular, the possibility of watering) should be taken into account. Floral fixtures must be securely fastened, have sufficient strength and accessibility to care for flowers. The main task is to create comfort and aesthetic perception.

A huge range of ready-made shelves and racks allows you to choose them, but only your own creativity allows you to realize your own ideas and make the best use of space. The question of how to make a flower shelf with your own hands is solved quite simply. It can be made from a variety of materials (plywood, chipboard, board, plastic, glass, metal) and improvised means. It is important to give the product an aesthetic appearance, do the work carefully and then securely fix the structure.

Wall shelves

One of the most common options is a flower shelf on the wall. It can have a different design and be made of different materials. It is important that the shelf does not have too much mass, but at the same time it allows you to stably place a flower pot on it. The dimensions and design depend on the number of pots to be installed. Excessive clutter is unlikely to improve perception. Rarely is a stand made for 1 flower. Most often placed from 2 to 5 plants.

The simplest design involves 1 platform with a decorative border on the sides. It is possible to make a shelf in the form of several parallel shelves with uniform side walls. The most popular are structures of several platforms at different levels, and they can have the same or different lengths, partially overlap each other or go in different directions.

How can horizontal platforms be combined into a single composition? There are several options:

Common sidewalls: on 2 vertical sidewalls parallel horizontal platforms are attached. Sidewalls can be made of solid slabs (boards), individual slats or openwork elements.
On wall slats or panels. In this case, a panel or several rails are attached to the wall surface, on which shelves are fixed perpendicular to the wall at different levels and according to different schemes.
Rod connection: shelves are strung on metal or wooden rods.
intermediate elements. The following varieties can be noted:

a common panel, from which shelves extend in different directions at different levels;
small panels for fastening 2 nearest shelves of different levels, which makes it possible to form a branched scheme of their location on the wall.

The platform of the shelf can have a different shape. The most common configurations are rectangle, square, circle, oval, segment or sector of a circle. The shelf can be given any original, complex shape, which is determined by the owner's imagination and interior design. They are most appropriate when using ultra-modern styles.

Required Tools

When making flower shelves with your own hands, you will need a tool, the choice of which will depend on the material used. The most commonly needed tool is:

Bulgarian;
electric drill;
screwdriver;
Grinder;
milling cutter;
jigsaw;
plane;
hacksaw;
hacksaw for metal;
scissors;
screwdriver;
pliers;
clamp;
a hammer;
mallet;
chisel.

Manufacturing process

The specifics of the manufacture of shelves depends on the selected material:

Wooden shelves. Wood is considered one of the most technologically advanced materials that is easily processed. The connection of structural elements to each other can be carried out with screws, according to the “groove-thorn” system with gluing or using metal corners. Natural wood has an attractive texture, and therefore does not require additional cladding. In the manufacture, it is enough to process the boards well and varnish them. To emphasize the structure, impregnating and tinting materials are used. When using cheap or used wood, the shelves are covered with paint.
Chipboard. This common material requires a special approach. First of all, at least the front end of the shelf must be pasted over with a decorative film, and even better, the entire panel must be lined. The connection of adjacent parts from chipboard is made with the help of a dowel (chopik). To do this, holes are drilled at the end of the shelf, into which cylindrical dowels are fixed with glue. Similar holes are made on the joined element. The junction is sealed with adhesive.
Plywood. Most often it is mounted on wooden slats. The thickness of plywood is chosen not less than 10 mm. To give the desired shape, a jigsaw is used.
Glass. Glass shelves look very modern. You can mount them to the wall using brackets. The glass plane is freely installed in a wooden or metal frame, and is pressed from above with a flower pot.

The sidewalls of the shelves give a special decorative effect, if they are made accordingly. The easiest option for sidewalls or intermediate common elements is a board or chipboard of the right size. The fastening of the entire shelf to the wall, as a rule, is carried out precisely on these parts, for which, from above (for reliability and from below), metal strips with holes for anchoring are fixed on them.

The design of the sidewalls in an openwork design gives the shelves a special sophistication. For this purpose, metal rods and wire are used, which are bent to form a certain pattern. Often, load-bearing parts are made of several rails or strips with decorative grooves.

Shelves can be attached to the wall in several ways. The most common dowels. To do this, holes are drilled in the wall, into which the corresponding plastic or wooden parts are inserted. Shelves are screwed to them with screws (self-tapping screws). Another common method is brackets. They are first firmly fixed to the surface with dowels or anchors, after which the shelves are mounted.

Corner shelves

A specific type of wall shelves are corner varieties. Placement of indoor plants in the corners of the room allows you to optimally use the entire space of the room. For this design, the shelf configuration in the form of a quarter circle is most suitable. For the simplest shelf, a T-bracket is fixed in the corner, on which a shelf made of the above materials is installed.

A more complex, but attractive option provides for a system of several shelves, some of which move away from the corner in different directions along the wall. For example, such a design is in demand: 2 corner shelves, and between them ordinary wall stands extend in both directions. It is possible to manufacture a shelf in the form of a corner. To do this, 2 platforms are fastened at a right angle, the side ends are rounded.

Mounted structures

Hanging shelves for flowers look good in niches, in the window opening. From a practical point of view, systems designed for space zoning are of interest. In this case, shelves with flowers suspended at different heights provide the creation of a conditional wall that visually delimits the room.

Hanging structures can hang from the ceiling on cords, macrame, cables, decorated slats. They can be hung with brackets attached to the wall. When zoning a room, a frame with a horizontal jumper is constructed, on which the cables for the shelves are fixed. The shelves themselves can be made from any of the materials mentioned above. Glass varieties are successful.

Hinged shelves in the window opening help to free the surface of the window sill. To do this, a hole is drilled in the upper beam of the opening and an anchor is fixed for attaching the retaining elements. Such a shelf can be made for 1 flower pot, and then the top is fastened at 1 point. If an elongated flower stand is planned, then 2 or 4 anchors are installed.

flower racks

The flower rack is designed for installation on the floor with the possibility of maximum and optimal placement of flower pots. Unlike furniture items, a flower rack should not “kill” with capitality, i.e. should not shade flowering plants. For example, the following structures can be given:

Corner wooden shelving. On a rectangular base 50-60 cm long and 30-40 cm wide, a vertical rack 80-100 cm high and 10-15 cm wide is fixed from 2 adjacent sides. The racks are fixed on top with a wooden plate. Between the base and the top plate, 2-3 shelves are mounted at different levels, similar in size to the base. Fastening to one rack should be alternated: if the bottom shelf is installed with the long side, then the next one with the short side.
Rack made of plastic and metal. 3-4 shelves of the original configuration are cut out of plastic with a thickness of at least 10 mm. They are installed on a chrome-plated or nickel-plated metal pipe with a diameter of 2-3 cm. As shelves, you can use a plastic window sill, which is cut into pieces 30-40 cm long. Such rectangular shelves are mounted at different levels.

Shelves for flowers will help to optimally use the space of the room and decorate the interior. They can be made with your own hands from different materials, choosing the design that is most suitable for a particular room.

Flowers in the house are beautiful and aesthetically pleasing. Living plants bring beneficial energy into the room, and sometimes even help to cope with various kinds of negativity. But arranging flowers on the windowsills is not as pleasant as decorating a special “living” corner for them with interesting neat shelves. Such flower shelves can be made by hand, and in this article we will share some ideas with you.

A flower shelf can be made from metal slats and wooden beams. Metal racks connected by jumpers will act as a frame, while wooden boards will become coasters for pots. Consider the process of work in stages:

If the shelves are supposed to be mounted on the wall, then for them you need to pick up metal rods with a cross section of 1 cm. If the structure is placed on the floor, then it is necessary to fix the corners at the installation sites. The dimensions of the shelves can be determined independently, based on the wishes and the availability of free space in the room.
Metal racks are welded together with jumpers. For example, if you take racks with dimensions of 90x20 cm, you can make a rack of 4 shelves, the distance between which will be 30 cm. Small pots with compact plants can be placed on such shelves, taller crops can be placed on the topmost shelf.
Racks for flowers are interconnected with rods to make the structure more stable and strong. This strapping is done on all 4 floors of the rack. After that, the design is painted with paint of the selected shade.
Wooden planks measuring 25x15 mm are divided into fragments of 60 cm, which corresponds to the length of the shelves. These parts are laid parallel to each other and fastened with 20 cm bars.
The structure is attached to the wall surface with self-tapping screws, making a step between the fasteners of 50 cm. In the process of work, the evenness of the frame location must be checked with a building level.
Wooden parts are painted in a suitable color, dried and laid on a frame. After that, the shelves are ready to put flower pots on them.

Mobile shelf for flowers

The mobile shelf can be made of wood or other suitable material. The advantage of the design will be that it can be moved to the most convenient place. To make such a rack, you will need the following:

plywood sheets, wooden spikes and beams, instead of beams, you can use a metal profile;
wheels for future construction, as well as legs for them;
fasteners - self-tapping screws;
racks and crossbars;
tools for work; glue, brushes with paints, a jigsaw and a drill.

As an example, we will consider the creation of a three-level rack of arbitrary size, you can choose the dimensions at your discretion. So, flower shelves are made in this way:

Before creating a structure on paper, draw a drawing of it with dimensions.
Sheets of plywood are laid out on the floor and the corresponding lines are applied to them, along which the details will be cut.
A frame is made from a wooden beam, fastening individual parts with spikes and self-tapping screws. If there are no bars, it is quite possible to replace them with a metal profile.
From plywood sheets, according to the drawn markings, the necessary parts are cut out, in which grooves are made. The racks of the frame will be inserted into these grooves.
Having chosen the paint of the desired shade, the plywood parts are painted and left to dry. Meanwhile, wheels are attached to the frame. After their installation, the frame is also painted with a composition of a suitable color.
When all the elements of the rack are dry, shelves for flowers are fixed on the frame, where pots with plants are subsequently placed.

Such a rack can be made of any height, although it must be understood that too high, more than 5 floors, the structure will be too heavy and massive.

Plastic flower rack

A cheap option from improvised materials is a plant rack made from a simple plastic window sill. As a basis, we will take a window sill 3.9 m long, as well as additional materials:

galvanized or nickel-plated pipes - 3 pcs.;
flange fasteners - 9 pcs.;
brackets - 2 pcs.

Let's get to work:

We cut the plastic window sill into fragments 1.3 m long. There should be 3 such pieces. These details will become shelves for flowers.
To install the shelves on the frame, we make 3 holes in the plastic. We arrange them so that they form the vertices of an isosceles triangle. Near the ends, next to the back, there should be 2 holes, and the third should be placed in the middle closer to the front edge.
Now we prepare 3 pieces of pipe, observing the same length. We fix parts of the structure with tightening flange fasteners.
The rack is attached to the floor with the same fasteners. From above, the structure is attached to the wall with brackets.

simple wall flower shelf design

There are also very simple options for making flower shelves, which require a minimum of effort and materials. Despite the ease of implementation and a small amount of improvised means, the interior detail turns out to be very original and interesting. We will make it from a wide board, leather belts and fasteners. Instead of belts, you can use something else: rep tape, twine, etc. We describe the work process in stages:

We take a board of the width we need and divide it into several suitable fragments of the same size. We grind the ends with sandpaper.
Now we paint the future shelf in any way we like. For example, you can cover it with a stain, and then with a colorless varnish, or you can simply apply colored paint.
We leave the shelves to dry and prepare the mount. We divide the belt into 2 blanks 50-60 cm long. Fold the blanks in half, step back from the edge 4 cm and drill holes.
Having measured the parameters of the shelves, we apply the appropriate markings to the wall. In the places where the dowels are attached, we make holes in the wall. We make loops from the belt and fix them through pre-drilled holes on the wall surface.
We install wooden shelves on these hinges, which by that time had dried.

Now we arrange pots with live plants. For greater aesthetics of such shelves in the room, you can hang several, and as the color of their design, you can choose a shade that matches the interior of the room.

Wall corner shelves

Consider another version of the rack - corner shelves. This solution is best suited for small cramped apartments. To make shelves, we need:

galvanized or nickel-plated pipes;
flanges and screws.

We make shelves in the following way:

From the chipboard sheet, we cut out the elements of the size and shape we need. The main thing is that in their dimensions they correspond to each other.
On these blanks we draw marks in which we will make holes for fasteners. There should be 3 such holes on each shelf.
We assemble the rack using fasteners: flanges and screws.
We install the shelves on the wall using brackets pre-mounted in the surface.
We paint the finished structure in the shade you like and dry it.

DIY glass flower shelves

Glass shelves in the interior look spectacular, especially if they are made of glasses of different colors and equipped with lighting. Such a detail will fit into almost any interior, regardless of style. Let's try to make a similar design on our own, using 6 pre-prepared glass shelves and two wooden slats for this. Let's describe the process step by step:

For work, it is better to take tempered glass with a thickness of at least 5 mm.
We make grooves in wooden planks corresponding to the thickness of the glass sheets, as well as the cross section of the planks. The fragility of the material should be taken into account and the grooves should be made as reliable and stable as possible.
Glass shelves are inserted into these grooves. For greater strength, the tree at the attachment points can be lubricated with a suitable adhesive composition.
Then the rack is installed in a suitable place.

Glass shelves with flowers can be placed on the floor or on the windowsill, or you can also make a smaller structure and place souvenirs and figurines on it.

DIY flower shelves. Video

Cultivation of flowers, for most housewives, is a very exciting activity. A small hobby gradually develops into a big hobby, filling all the free space with itself. It is good if the living area allows you to allocate the necessary territory to create a green oasis. But what about this sprout, which has no place on the windowsill, cannot be put on the closet either, the table is busy, and on the floor among the large flowerpots it will simply be lost.

The solution to such a global problem is floor and wall shelves. The modern market offers a wide range of ready-made structures. The variety of shapes, structures and colors is amazing and has no limits. However, made by hand, flower shelves become a unique design solution and bring an unusual atmosphere to the interior.

Variety of solutions and materials

Before starting work, it is necessary to create an approximate plan for the arrangement of flowers, based on which the dimensions and features of future shelves will be determined. Depending on the type of plant, two main options are used:

wall;
floor.

The number of flowerpots located on the selected structures also divides them into several types:

Single. In most cases, they are used as wall hangings; small, densely flowering bushes or curly dense greens look very beautiful in them.
Double. For them, it is better to choose flowers with the same conditions for care. They can be wall and floor, for the second option, large tree-like plants are more suitable.
Multi-seat. Shelves occupy a certain section of the wall, the main thing is not to put very heavy pots in order to prevent falling, in the floor version you can place up to ten flowerpots.

All of the proposed options can be designed as corner shelves, so you get space savings and additional opportunities for design innovation. Fans of liana plants are offered ceiling shelves for consideration.

For your own invention of flower racks, you can choose and combine a wide variety of materials. Very often, many opt for a tree. Despite the environmental friendliness and versatility in use, do not forget that you can always find other interesting options at hand that have their own advantages. We will consider some of them in more detail.

Plywood shelves

Plywood is perhaps the simplest and cheapest material from which flower shelves of various shapes and sizes are obtained. If there is no plywood sheet in the house, a small amount of money will be spent on its purchase. The process of creating a shelf from plywood is not complicated. If you have the necessary tools, the task in hand will turn into a work of art in a short time.

In the beginning, you need to make a sketch. Here you can show unlimited imagination. The main thing is that the design obtained in the end should correspond to the initial purpose, be durable and withstand the intended number of pots.

When the canvas is ready, the saw cut edges are cleaned with sandpaper and holes are made for future fastening. The entire surface is covered with a special solution, due to which moisture resistance is increased and mold is prevented. After drying, the shelf is opened with varnish.

Creative people can demonstrate their talents by decorating the product with drawings, pasting it with pebbles or shells, and being creative.

To fix the wall-mounted versions of plywood shelves, metal corners or brackets are used, due to which they are attached directly to the wall.

Plastic rack

The most common place for placing flowers in a room is a window sill. Using such a plastic canvas, flower racks are created. You can buy it at almost any hardware store or order it from the manufacturer.

For the construction, you will need several nickel-plated pipes, fasteners, flanges for attaching to the floor and a pair of brackets, do not forget about the tools necessary for the job.

After the measurements are taken, the window sill is cut to the desired length. The next step is drilling holes for the pipes, two at the edges, it is important that they are parallel to each other, and one in the center. The length of the pipes must be the same, otherwise the design will be unreliable and shaky. The assembled rack is fixed with ceiling brackets and floor flanges.

The advantages of plastic racks are durability, they are not afraid of moisture, they are easy to care for.

Corner shelves for flowers

To create a corner shelf, you can use all the materials listed here. For small items, there will be enough leftover materials.

The technology for creating corner shelves with your own hands is very simple. From a chipboard sheet, a surface is cut to the desired size. A galvanized pipe is threaded into the prepared holes and the whole invention is interconnected by flanges. It is fixed on the selected surface with the help of brackets.

The next step is varnishing or painting.

To create a green corner, an interesting solution would be a kind of corner rack. As the shelves increase, they decrease, representing a pyramid. On this design, you can arrange flowers of different sizes using climbing plants on the sides.

Wooden flower shelves

Wood is one of the most reliable materials used in construction. Properly assembled and fixed wooden racks or shelves adapt to any number of plants, regardless of size. In the choice of wall wooden shelves, you can limit yourself to the simplest option. To do this, a timber of the required length is taken, varnished or painted and fastened with metal corners to the wall. If you replace the fasteners with leather straps, you get a creative design approach that brings individuality.

For plants in large flowerpots, wooden floor racks are made. They can withstand a lot of weight, allowing you to combine different types of colors.

From scraps, even if of unequal length, a corner shelf is easily assembled. Flowering bushes diversify the boring life of corners with their bright colors.

For lovers of unusual options, wooden shelves are offered for consideration, combining several different materials.

The method of assembling wooden shelves or racks is the same as in the version with plywood.

Wall shelf for flowers made of wood and metal

When combining materials for flower shelves, we recommend choosing a combination of metal and wood. A welded metal frame with wooden flooring is used for wall types of shelves and fits very harmoniously into a modern interior.

For manufacturing, you will need a drawing with measurements, several rods, which will later create the base of the shelf, and a wooden board for the partition. After welding the main part, it must be treated with an anti-corrosion solution and painted in the selected color. Next, a prepared wooden plank is installed, the finished product is mounted on the wall using self-tapping screws.

Considering this combination of materials in the floor options for flower racks, the main work is carried out according to the same plan. Preference is given to options in several tiers, and lovers of sophistication will like forged flower stands.

Glass shelves for flowers

The main location of glass shelves is usually in the window space. On such shelves, all plants will receive the necessary portion of light. Preparing for work, it is necessary to choose the right glass thickness. The best option is 0.5 cm. Having strengthened the lower part with a tree, this design can easily withstand up to ten small pots of flowers.

If handling a glass cutter causes some difficulties, it is better to seek help from knowledgeable craftsmen. Having provided the right dimensions, they will easily complete your task.

In addition to the glass, you will need iron corners with which the rails are attached. Shelves are placed on top of the rails.

Great importance is attached to the competent arrangement of flower racks and shelves. Following a number of simple tips, harmony is achieved between green space and the atmosphere of housing:

If decorative flowers predominate in the floral variety, it is better to use a wide floor rack. Its height should not exceed the middle of the height of the room, otherwise a visual distortion of the space will result.
When placing flowers on tiered shelves, we use the rule from largest to smallest. Lush bushes are placed on the lower floors, and we gradually create a transition to miniature options.
When creating flower stands with your own hands, special attention should be paid to the supports. Large flowerpots require a strong and stable structure, especially if there are small children or animals in the house.
A large number of plants placed next to each other on the same shelf should have the same conditions for care.
Bring variety by inventing interesting ideas and adding small accents. Any snag with an extraordinary approach, with the addition of artificial accessories in the form of butterflies or bugs, will turn into a masterpiece.

The use of flower shelves is not limited to the interior of the premises. Houses, apartments with balconies or loggias contain entire greenhouses. Owners of personal plots create incredible compositions on the territory. Refurbished ladders, bicycles and wheelbarrows are used as racks. Teapots, watering cans and other old utensils can serve as a hanging shelf. Such green corners become one with the owners, and self-designed racks and shelves for plants are an integral part of a small flower paradise.

What hostess does not want to transform the look of her room with the help of bright colors of blooming violets, begonias or geraniums? It is aesthetically pleasing, a little refreshing, and generally beautiful. But inevitably it is necessary to decide where to place these flowers in pots? Not on the floor. Need shelves. It is not always possible to find what you need in the store, and you want to save money. There is only one way out - to do it yourself, so that all this colored aesthetics, as they say, can be sorted out.

In this article, we will tell you how to make do-it-yourself flower shelves from wood and chipboard, consider options for wall and floor shelves, and also show photo and video instructions.

What material are the shelves made from? It can be plywood, chipboard, wood, metal, glass, drywall, etc. If you have wooden planks lying around on the farm, and you have not yet found a proper use for them, make a wooden flower shelf.

Let's start assembling a wooden structure

It will be very good if you have about 6 pieces of these wooden planks, and at least two meters high and 35 × 5 mm in size at the end. You will also need two bars of 20 × 20 mm, also 2 meters high.

Arm yourself with a pencil, a screwdriver (phillips) or a screwdriver, a tape measure, a saw and a jigsaw, as well as 25 and 40 mm self-tapping screws. Also, you can not do without an assistant who will simply support the structure when mounting the shelves to the racks. Now you can start manufacturing.

Wooden planks for shelves are cut into 60 cm (12 pieces) and 64 cm (6 pieces) and, in general, we get 18 small planks - these are future shelves.
The bars are cut by 70 cm and it turns out 4 pieces - these will be the side racks.
From the remnants of the bars, we cut out six more small bars: four 23 cm each and two 19 cm each. This is the future mount for the shelves.
On the bars that will serve us as racks, we make markings for the two lower shelves with a pencil. The markup is done with the calculation of the height of the flowers themselves in the pots, which we plan to place on them.
With the help of four bars (23 cm) we make two shelves. At both ends of the slats, bars are fastened across with 25 mm screws, which, in turn, connect the slats to each other.
Using 70 mm self-tapping screws, we fasten the shelves to the vertical racks.
Using the same self-tapping screws, we attach 19 cm internal bars to the upper parts of the rack between each pair of vertical racks.
The third shelf is made in place by attaching each plank to the top of the product with 25 mm self-tapping screws.

This is how a small floor shelf or flower rack turned out.

From chipboard

If you prefer a chipboard shelf, then you probably have experience working with this material. Here you will have to tinker not so much with the manufacture of the structure itself, but with the preparatory work before assembly. You will need:

Chipboard: workpieces with a size of 140 × 200 mm (the best is the waste of pieces from one sheet, although not essential)
Fasteners (confirmations, self-tapping screws - 2 pieces for 45 mm and 6 pieces for 16 mm).
Confirmation drill and regular drill.
Mounted planks or awnings.
Edge.
Chopiki made of wood (dowels).
PVA glue.

From tools:

Iron.
A hammer.
Device for pasting with an edge (a regular bar with a groove a little more than 16 mm).
Wooden block wrapped with sandpaper.
Clamp.

As you can see, the list is considerable, and all this is necessary to prepare for the assembly.

First of all, we determine which ends of the parts will be visible, after which we begin to glue them with an edge. We use for this an ordinary household iron and a shoe knife to trim the excess edge. Using a special tool, we tightly smooth the glued melamine edge and grind the end corners with an emery bar. Those places that will be joined together should not be pasted over.

We are preparing the elements of the back base for future shelves that we have not pasted over with a paper edge for docking with each other. We drill two shallow holes and pour glue into them. We hammer chopsticks (dowels) into the holes, and in the joined part of the adjacent element we also drill two holes and fill them with glue.

To make the chopsticks coincide with the holes of the adjacent element, use special “jigs” or furniture taps for dowels. "Conductors" are put on dowels and pressed against the mating part, sharp taps will inevitably leave small indentations. Drill there.

We connect the parts together and press firmly. For this, a clamp will be an indispensable tool for us. Press the parts firmly with a clamp and leave to dry completely.

The back of the shelves is done. Now our task is to fix the shelves. To do this, first we make markup for confirmations.

We drill holes with a special confirmation drill, after which we proceed to fasten the shelves, alternating them on the right and left.

It is best to attach hinged strips from above and below so that the shelf hangs vertically on the wall, even if someone accidentally touches it.

It remains to beautifully arrange the flowers and you can enjoy the work of your own hands.

You can dream up and make the shelves colorful. Or another option: round the free corners of the shelves and upholster them with a T-shaped plastic edge. It will be much more beautiful.

corner

Now is the time to talk about corner flower shelves.

Sometimes a place for flowers is only in the corner, therefore, we need a corner shelf. It can be either a bookcase or a hanging shelf. Everything is simple here, as mentioned above, the main thing is to prepare everything correctly. For example, if we want to make a corner bookcase from chipboard with elements of chrome pipes, then we need:

4 squares of chipboard, the size we need.
T-shaped edge (it is possible to match the color of the product, although this is not so important).
Chrome-plated pipe Ø 25 mm (usually three meters are on sale, so it will be better and cheaper to get the leftovers somewhere), 18 pipe flanges.
Three plastic, chrome-plated legs.
Melamine edge.

From tool:

Drill with a nozzle.
Iron.
Shoe knife.
Edge banding device.
Sander.
Electric jigsaw.
Milling cutter.
Pipe cutter.
Rubber mallet.
Self-tapping screws for wood (4×16) up to 70 pieces.
Screwdriver.

We pre-prepare the shelves, making them radius. We can do this with a jigsaw and grinder. We cut off the excess with a jigsaw, and process the cut with a grinder. It is worth noting that a tool such as a jigsaw mercilessly cuts off the laminate when cutting. After grinding, these chips are practically removed. The next step is to glue the even ends of the shelves with a melamine edge. Then we will deal with the radius places of future shelves. We need a milling cutter and a milling cutter, which cuts a small groove at the end of the chipboard sheet, where we subsequently need to hammer the T-shaped profile with a rubber hammer. Next, we make a basting marker and drill 3 holes in the chipboard for the 25th pipe.

Holes are not drilled in the upper and lower shelves at all.

With a special pipe cutter, we cut off the parts of the chrome pipe we need to size. We fasten the legs to the bottom of the whatnot. Then we screw the flanges onto the holes of the two shelves on both sides (it is better to do this before installing the shelves into the product) and thread the tubes. We fix them with special screws on the flanges and, one might say, the whatnot is ready. This corner product with flowers will be a wonderful decoration for your corner.

Suspended

Now it's worth talking about light-loving plants that need to be installed closer to the window or even on the window. Naturally, we will not talk about flowers, but about window shelves for flowers. Of course, your desire to arrange flowers on the window can be caused not only by the light-loving nature of the plant, but also by the growth structure of its shoots. They can be, for example, flowing or curly. In this case, it would be better to think about how to arrange these flowers higher. How to make shelves for flowers in this case? To do this, you can use different materials.

You can also make it so that there are hanging plants in pots on the window. To do this, we need only a few anchor anchors with an 8x60 hook.

We drill a hole in the upper part of the window with a puncher.
We insert the anchor hook and screw it clockwise until it stops.
We tie the ropes to the pots. It is better if it is an ordinary fishing line. It is not so visible and is quite strong. However, there is no limit to the imagination.

The anchor mechanism is designed in such a way that when it is screwed in, its spacer part expands and, thus, sits quite firmly in the concrete.

Glass shelf on the window

And if we talk about literal window shelves, then the next option is especially acceptable for those who want to do everything, firstly, quickly, secondly, reliably and, thirdly, beautifully. It is clear that we are not talking about placing flower pots on the windowsill. It is cumbersome, inconvenient, and in some cases not particularly beautiful.

These shelves can be mounted provided that the window itself is wooden.

In any furniture store that sells accessories, you buy a chrome-plated shelf bracket (it is called an arched, concave bracket). On the household market, you can buy a one and a half meter lath about 3.5 cm wide and about 1.5 cm thick. As a rule, there is a glass store next to the market, and if you know the exact dimensions of your future shelf, then order glass with a thickness of 3 mm with grinding in a circle. For beauty, you can choose any tint, and if you have children, it will be important that the glass is necessarily tempered. Such glasses, when falling to the ground, shatter into small pieces with non-sharp ends, and your child will not get hurt on them.

Next, we measure the depth of the shelf support and cut small strips according to these dimensions. From below, on small screws, we fasten these strips to the brackets. The tree in this case will serve as a lining material between glass and iron. Just be sure to make sure that the screws do not come out from the other side. Therefore, your fasteners must be of the appropriate size. It remains the case for small: attach the brackets to the window frame. After that, you can put shelves on top and make sure that we did everything correctly and the plane is strictly horizontal (use the building level for this). The shelves are not attached to the brackets, but will be pressed against the flower pots. The convenience is that this entire glass structure can be easily dismantled in case of general cleaning, when it is necessary to wash the windows.

As you can see, there are quite a few variations on the flower shelf theme. Which one you prefer depends on your taste and your capabilities. The main thing is different: beautiful flowers will decorate your home, and beautiful original handmade shelves will say a lot about the owner and mistress of this house. Therefore, let there be many flowers in your house.