Painted walls in the bathroom. Painting the walls in the bathroom (50 photos): features and beautiful colors

It is enough for any home master to figure out how to paint the walls in the bathroom to make an inexpensive and at the same time very elegant finish in this room.

In Soviet times, painting a bathroom was almost the only option for finishing it. Good paint resisted the extreme temperatures and high humidity that are always present in this room. With the advent of new finishing materials on the domestic market, coloring has become unpopular.

Painted bathroom

Among the majority of consumers, it was associated with cheap and not entirely poor-quality repairs. But in recent years, paints and varnishes have again become in demand. In fact, they have found a rebirth, thanks to European designers. It is in Europe that there is a real boom in this finish option. Especially when it comes to renovating large bathrooms.

Painting the walls in the bathroom, as a way of modern decoration, has the following undoubted advantages:

it is easy to do it yourself, with a minimum of experience in finishing work;
the cost of most paints is quite acceptable;
it makes it possible for a person to show his creative talents (it is easy to choose any color of the coating).

In addition, painted surfaces are easy to care for. Walls can be easily washed with a sponge or cloth using conventional detergents.

The disadvantages of painting walls include the following facts:

relatively low durability of paint and varnish coatings (for example, when compared with finishing a bathroom with ceramic tiles);
the need for careful preparation of walls for painting;
high susceptibility of painted surfaces to mechanical stress (paint is easily damaged by impacts).

Experts do not advise painting walls in bathrooms with small dimensions, as well as in cases where there is no well-functioning ventilation system in the room. In such situations, it is better to give preference to other methods of decoration.

Materials for painting walls in the room for receiving water procedures must have antibacterial protection. In a humid environment, there is an active growth of fungi and a variety of microorganisms. Only paint and varnish compositions with special additives are able to resist their development. Most often, the walls in the bathroom are decorated with the following paints:

latex and acrylic. These water-dispersion compositions protect walls from the appearance of bacteria, well protect surfaces from physical influences, and are very durable. Important point! Latex paints make it possible to obtain a matte surface of the walls, on which stains from dried water drops are practically invisible.
Water emulsion. A traditional dyeing material used for a very long time. easy to apply with your own hands, they do not emit unpleasant odors, are considered completely harmless and environmentally friendly. But the surfaces painted with them require special care. Water emulsion is afraid of most detergents. Therefore, the walls on which it is applied should be washed very carefully, with a minimum of chemistry.
Oily. These compounds are characterized by a pungent odor, they dry for a long time on the treated surface. But oil paint remarkably resists moisture, mechanical shock and elevated temperature. At the same time, it is inexpensive.
Chlorinated rubber. Paints that are very popular in European countries. We have recently started selling them. Such compositions have many operational advantages, but their cost is objectively high.

The choice of paint for the bathroom

Also, universal alkyd enamels are often used to decorate walls in the bathroom. Formally, they are intended for outdoor work, but they are also suitable for finishing rooms with special operating conditions. Such compositions give a good appearance to the surfaces, when used, they do not leave stains on the walls, they dry quickly. And most importantly - alkyd enamels perfectly protect the walls from moisture.

If you want paint and varnish materials to adhere well to the walls, you need to properly prepare the surfaces for painting. You will need to remove the old coating with your own hands, carefully align the walls, rid them of cracks and cracks, and then prime them.

Removing old paint

The paint that has served its purpose is removed with a grinder equipped with a flexible disk, a perforator and a chisel, sandpaper, a spatula, and a scraper. Home craftsmen also often use special attachments for an electric drill, which allow you to get rid of old coatings in the most inconvenient places, a chisel and a puncher. Professionals recommend using diamond nozzles on a grinder to remove unnecessary finishes. But not every person has such a power tool.

After cleaning the walls in the bathroom, they need to be checked for mold and fungus and, if necessary, treat the problem areas with an antiseptic, bleach or blue vitriol. Then wipe the surfaces with a damp cloth and proceed to puttying them. For these purposes, putty compositions are used for indoor work.

Note! The putty you choose should have a high moisture resistance index. Ideal from this point of view are compositions based on latex or acrylic.

After sealing the cracks, you need to wait until the putty dries, and then remove all small irregularities from the wall with a grinder or sandpaper. The next step is surface treatment with a primer. It is applied in several layers. Buy primer solutions that have antibacterial characteristics. Then the walls will subsequently not be affected by the fungus. The best primer for bathroom surfaces is latex based.

Before painting, it is advisable to dry the bathroom with an electric heater. Such a procedure is necessary, since even well-prepared concrete walls absorb moisture.

DIY wall painting

Directly painting is done with a spray gun, roller or. The specific instrument is up to you. In doing so, remember that:

It is difficult to handle corners and small irregularities on the walls with a roller. But its use allows you to save paint due to the fact that it is superimposed in a thin layer on the surface.
When using a brush, the consumption of paintwork material will be large. But the texture of the surface will be denser.
The spray gun is the easiest to work with. True, not all home craftsmen have it. And after painting, it is required to disassemble, rinse (and very carefully) each part of this device. This is not to everyone's liking.

In everyday life, it is easiest to paint walls with a brush and roller. This combined method will provide the perfect result of finishing activities.

The coloring operation itself is performed in two layers as follows:

Prepare (according to the manufacturer's instructions) the paint.
Apply the first layer. Better to do it with a brush. It makes it possible to process the joints and corners of the walls with the highest quality. In addition, the brush guarantees a dense layer of paint, which allows you to mask small flaws in leveling and grinding the surface.
Waiting for the painted walls to dry.
Apply the second layer. Now with the help of a roller. If you are using a water-based emulsion, the bristles of this tool should be made of acrylic. For painting with latex and oil compositions, choose a roller with polyamide pile.

The bathroom, like all other rooms in the house, is decorated in different styles and different materials. And Venetian plaster, and tiles, and mosaics, and wood - everything is in use.

But we will focus on How to paint a bathroom, and whether it is worth it. Although we immediately note that it is worth if:

Do you want to realize your bold idea that is not like the rest;
The bathroom is spacious enough and allows you to not accumulate moisture;
The room is provided with high-quality ventilation;
Need to update on a rented apartment;
Also, the bathroom needs to be painted when an urgent, but budgetary repair is required.

Note!

Paint is better to decorate certain areas of the room that are not in contact with water.

With proper selection and application, the coating will be durable.

However, in such places, glass panels can be attached over the paint.

Be that as it may, painting the walls in the bathroom - a procedure familiar to Soviet apartments in our time has already moved to another stage.

This is not a cheap look, but work on design with modern materials. Although the lesson in its own way is not difficult, but it requires careful preparation.

Painted walls in the bathroom have both positive and negative sides.

Advantages:

Economical coating method;
A less time-consuming option than tiling, but with a properly prepared surface to be painted;
Does not require special qualifications;
Provides a wide choice of color composition and pattern.

Flaws:

Easily damaged by hard objects, as a result of which moisture can penetrate under the paint layer;
Painting walls in the bathroom is not recommended in places where moisture accumulates or in small poorly ventilated rooms;
A qualified approach to surface preparation is required;
Sparing, but frequent care of the painted surface is needed;
Less durable than tiles.

Note!

After taking water procedures, it is necessary to wipe moisture from the walls, turn on forced ventilation or leave the door open.

Color selection

Before you paint the walls in the bathroom, you should decide on the features of the selected materials.

First, they must be antibacterial. One way or another, moisture will accumulate on the wall, and this is a favorable environment for microorganisms and fungi.

In the least accessible places for cleaning, they will penetrate the structure of the paint, which will lead to the defeat of this area.

Secondly, the following paints are used for wet rooms:

Alkyd enamel is a universal paint, often used for outdoor work.
It has moisture-proof properties, dries quickly, forms a thin layer and spreads well over the surface without leaving streaks, gives an acceptable decorative look.
Oily - dries for more than a day. Widely used in Soviet times. Now it is already relevant, since alkyd enamel has come in its place.
Painting the bathroom with this paint is acceptable if you do not have other means available;
Water-based - has a slight odor and dries quickly;
Chlorine rubber - weather-resistant and moisture-proof. Used for swimming pools;
Latex - has high wear resistance in a humid environment. Allows you to achieve a matte finish, it is less noticeable stains from dried water drops.
Recommended for interiors with only artificial lighting.

Thirdly, you still need to choose what color to paint the bathroom. At your request, all of the listed paints are tinted in any shades.

The use of light colors will visually expand the room. It is worth choosing them to match the plumbing or furniture.

For large bathrooms, you can resort to a contrasting design.

Note!

On darker paints, the remnants of steam and drops are more noticeable.

Preparing for painting

Painting the walls in the bathroom requires careful preparation. The walls must be level and have a smooth surface.

Preparation procedure:

Remove old paint and other coatings.
For this, the following are used: an angle grinder with a flexible rubber base for sandpaper, sandpaper, a spatula, a scraper, special solvents such as "B-51", etc.;
Rinse with warm water;
Align the resulting chips and defects with a waterproof acrylic putty;
Sand the walls with fine sandpaper;
Wipe with a damp soft cloth to remove sanding dust.
If necessary, treat areas affected by fungus and mold. To do this, use copper sulfate, bleach, special antiseptic compounds;
Preparing the wall in the bathroom for painting requires mandatory priming. As a rule, you need to apply at least 2-3 layers.
It is recommended to use a primer containing latex, as well as having antibacterial properties;
If necessary or as an experiment, after the first coat of primer, a glass fiber canvas can be glued on.
This will give additional texture and strength to the coating.

Now the bathroom is ready for painting!

Note!

Even treated concrete walls can absorb moisture.

When using electrical equipment in a humid environment, strictly follow the safety precautions.

Painting

Painting a bathroom with your own hands is a creative and interesting thing. It is carried out in just two stages.

Training.

Surface coloring.

Note!

Before painting the bathroom, it is necessary to ensure good air exchange in the room.

Otherwise, even after cleaning, condensation will remain.

painting the bathroom - the type of finish is quite simple, and if you have high-quality building materials and tools, it is reliable and convenient. But it is very important to prepare the surface first.

The most budgetary type of decoration in the bathroom is painting the walls. DIY bathroom wall painting saves money for the work done, and is not that hard of a process. The main thing is to properly prepare the walls and decide in advance on the design in order to paint the bathroom with your own hands without any problems.

Wall decoration with paint is a cheaper option compared to tiles, plastic panels or decorative plasters, but not worse in terms of properties.

The positive characteristics of wall painting are:

Budget savings. Paints are cheaper than other finishes, so painting your bathroom won't hit your budget that hard.
Ease of application. Coloring is done easily and without any special skills.
Assortment of colors. A variety of palettes can embody any ideas of designers.

In addition to these advantages, it is worth adding that good paint, when applied correctly, will create a room that will comply with sanitary hygiene standards.

The negative qualities of the painted surface include:

Frequent cleaning. Every day after bath procedures, the walls must be wiped.
Condensate. Occurs when a small bathroom has poor ventilation, and therefore destroys the finish. In this case, you often have to renovate the bathroom.
High probability of damage to the coating. It can be easily scratched with a sharp object, ruining the finish, while moisture will collect under it.

Types of paints

The bathroom is the room where the humidity is high. When choosing the type of paint, it is necessary that it has the following properties:

resistance to humid air;
pass air;
antibacterial protection;
without toxic substances in the composition.

In the modern construction market, depending on the basis in the composition, there are such types of paints:

Oil. The low price of this type, together with a high service life, makes them a common material among repairmen. After painting, a durable layer is created on the walls.

Alkyd. They have high water-repellent properties, so they are often used for bathroom renovations. They can be glossy and matte, toxic during application.

Water. Paints based on this are considered by professionals to be the best solution for painting a bathroom. They have a high degree of resistance to moisture and ultraviolet radiation. Dry quickly after application. The walls are allowed to "breathe".

Related article: Features of oil putty (technical specifications)

In accordance with the composition, there are such types of paints:

Acrylic. They are universal, they fit equally well on any surface, regardless of its material.

Mineral. They can be applied to any surface, but have a short service life.

Silicone. Such paints are strong and durable, but very high cost.

silicate. They have a high degree of vapor permeability, are resistant to temperature changes, and precipitation, the service life can be 20 years.

Design and its secrets

Bathroom wall painting design is a very important issue that needs to be addressed before finishing.

The first step is to decide on the color of the coating. There are some secrets to choosing the right tone for your room. They are based on the following criteria:

If the bathroom is small, you need to buy light-colored paint, it will visually increase the space. Peach, pink, blue, white and green color shades are ideal.

It is better not to paint a small room completely, but to combine it with tiles or plastic panels.

A large and spacious bathroom is a good place for experimenting with the most daring ideas, in which rich colors occupy an important place.

The texture of the paint when choosing is also of no small importance. It comes in two types - matte and glossy. Paint with a matte texture is universal, after application it hides small surface flaws. Glossy texture will add shine and color saturation to the design of the bathroom.

Gloss looks beautiful only on perfectly flat walls.

Wall preparation

Preparing the walls in the bathroom for painting is a very important step before applying the finishing material. It consists of the following items:

Dismantling of the old finishing coating.
Cleaning the walls from dust and dirt.
Seal cracks and pits.
Wall primer.
Puttying the surface for maximum leveling.
Sanding plastered walls with sandpaper.
Treatment with a primer with antibacterial properties, at least 2 times.

Before applying a new layer of any solution, you need to let the previous one dry.

Painting tools

Painting a bathroom with your own hands is an easy job. The main thing is to have the necessary tools at hand.

You can paint the walls with the following tools:

Tassel. Thanks to her work, the texture is dense, but the material consumption is too high.

It applies a thin layer of paint to the surface, which saves its consumption, but it is inconvenient to paint over the corners with it.

Related article: How long does it take for acrylic paint to dry?

They are very convenient to quickly cope with painting the walls. Not everyone has it, so buying it to make repairs in the bathroom once does not make sense.

During staining, it is better to use a roller and a brush: such a pair of tools will cope with the repair without any problems.

Coloring process

After preparing the walls for painting in the bathroom, you can immediately start finishing.

The easiest and fastest way is to paint the walls in one color. Areas that do not need to be painted over must be sealed with construction tape.

Wall painting is done step by step:

Stir the paint until smooth. All lumps formed are carefully removed.
.If we paint with water-based paint and not white, then add color to it, stirring, gradually pour in a thin stream until the desired shade is obtained. Oil paints and enamels are sold already mixed.
First of all, carefully paint all the corners with a thin brush.
We take a roller or a wide brush and proceed to painting all the walls, starting from the top. We dip the tool into the paint not much so that smudges do not form on the surface. After finishing with painting the entire coating, we are waiting for drying.
After drying, apply another layer of paint, repeating the previous maneuvers.

If after two layers of material the tone of the walls is still not uniform, it is necessary to paint the surface a third time.

On the video: the pros and cons of painting the walls in the bathroom.

Coloring methods

Modern bathroom decor can be both creative and unique. There are several options for painting walls to decorate the bathroom:

Drawings using stencils. We paint the walls in the chosen color, and after drying, using a stencil, we apply drawings all over the wall.

Stripes with tape. We glue the walls with strips, leaving the desired gaps open, for painting. The number of colors and its shades depends on personal imagination. We remove the adhesive tape from the surface slowly, it is better after the paint has dried.

Making patterns with rollers. In the building materials store, we purchase a patterned roller, which consists of foam rubber, and an additional one with an engraved pattern. On the walls that are painted with the main color, we begin to apply patterns with a roller. For the pattern, we select a color that matches the base color, or matches the shade. During the application of the pattern, the roller must be kept level, painted from top to bottom vertically.

During the repair, there must be good ventilation in the room so that the finish dries on time, because the air in it is high humidity. Drafts must be excluded, and the temperature should be within 20-25 degrees, without sudden changes.

Paint errors

Related article: How to originally paint the walls in two colors?

The most common mistakes during surface painting are:

Wall painting without prior preparation. Even if the walls seem smooth and clean, they still need to be prepared. How to prepare the walls for painting is described above.
No primer. Often, most people think that priming the walls is unnecessary, because the walls are clean. Over time, due to the lack of a primer layer, a fungus appears, and the paint peels off the surface.
The paint has not been prepared correctly. Before preparing a paint solution, you need to carefully read the instructions for preparation. The prepared mixture should not be thick and not liquid, namely, medium consistency, without lumps.
Random application of finishing material. The method of staining is very important, the type of coating after drying depends on it. Movements during staining should be directed in one direction and be either vertical or horizontal. Chaotic movements after drying are visible.

It is better to apply the next layer of paint perpendicular to the previous one, then the dried walls will be covered with high quality.

Violation of the drying time. On the packaging with paint, each manufacturer indicates the drying time of the layers. Even if the finish feels dry to the touch, it is best to wait the indicated hour so that when applying the second coat, the first does not end up on the roller.

To exclude all sorts of defects after the finish has dried, you must listen to the recommendations of experts:

Do not touch the paint while it dries;
Never apply a second coat if the first is still wet;
Carry out staining in daylight, electric light does not allow you to consider the mistakes made;
If paint gets on the floor, remove the stains before they dry.

It is not so difficult to paint the walls in the bathroom yourself, the main thing is to follow the instructions, following the sequence of steps.

Bathroom decorating tips (2 videos)

Bathroom design options (27 photos)

The question of what color to paint the walls of the bathroom and the restroom, so that it is pleasant, stylish, and functional, is even before the start of the repair. After all, in accordance with the chosen color scheme, you need to choose the right lighting, hide the entire pipeline and think over the fasteners for various elements and plumbing.

When choosing, you also need to focus on the available area, because small rooms do not accept dark shades, and large ones will be boring in one color. The right combination is a guarantee of comfort and convenience, as well as a psycho-emotional state, because colors greatly affect our mood.

What rules should be followed when choosing the color of the walls and the overall design?

Below are some tips to help you navigate.

It is not recommended to use gray or shades close to them, since a bathroom, especially without windows, is considered a room where high humidity prevails. Color can add a bad mood. Ash and other similar shades are best used in large spaces where there are sources of natural light.
With the wrong color selection, a bathroom, especially a small one, can visually narrow even more.
Lighting must be properly organized, because it is in the bathroom that people put themselves in order and do makeup. An important role in the comfort of these procedures is played by the decoration of the walls, as well as their color scheme. The selection of light and color should be a harmonious combination.
The bathroom is a place for relaxation, so the color solution should be pleasant for the owners, because their emotional state depends on it.

Colors and shades for small bathrooms

Small bathrooms require some attention, because when designing a small space, you can't go wrong with the choice of shade. It is known that dark colors have a depressing effect on the human psyche, and in a small space this is especially felt.

The photo shows examples of bathroom designs

Popular monochrome also has its drawbacks. If contrasting shades are taken in equal proportions, this may not give the desired effect of positive perception. Pastel colors are best, against which suitable dark or bright colors will stand out. This is especially applicable in those rooms where there are no windows and high hopes are placed on artificial lighting.

This is argued by the fact that a large number of colors scatter attention and dazzle in the eyes. Having chosen 3 different shades, the lighter one should be placed on the walls, the middle one on the floor, and the darkest one should be left for the furniture.

Photo examples

In order to visually make a large bathroom out of a small one, you need to use the following techniques:

Laying tiles diagonally on the floor and horizontally on the walls will help create the illusion of movement. Do not grout the seams with contrasting grouts, unless the style and design require it.
In order to visually raise the ceiling, ceramic tiles of a contrasting color with respect to the main tone should be laid above and below.
A small design trick is to lay out only the corners with dark tiles. Thanks to this, the room will visually expand.
Another design move is the installation of stretch ceilings with a mirror or glossy surface, which contribute to the illusion of increasing space. Alternatively, slatted ceilings and slatted beams are used. Their location along the length of the ceiling gives the necessary feeling.
Facing using vertical contrasting stripes or imitation columns.
When using decor, it should be placed just above eye level.

Important! Do not divide the space of a small bathroom horizontally with contrasting tiles. This effect further narrows the space.

If you really want something contrasting, then you need to paint the wall opposite the door in a dark shade, and the rest are lighter.

Colors and shades for spacious bathrooms

It is very interesting to work in a large bathroom, where there is a lot of space that requires careful attention. Here it is necessary to think over not only the ergonomics of the arrangement of interior elements, but also to choose the right style and, accordingly, the main color. But not always the presence of a large area plays into the hands. Such a room is easy to overload with decor and furniture, and

the wrong color of the walls will significantly narrow it.

There are classic, timeless color combinations that always look stylish and advantageous.

Bathroom and toilet in black and white

The history of the use of this combination began in the 1920s, simultaneously with the appearance of the Coco Chanel black dress to the world. The trend was wide geometric shapes using black and white tiles, which were located in a checkerboard pattern. In order to create a luxurious and modern interior now, you need to combine chrome tiles, steel-colored fittings, and silver-framed mirrors in one room and the result is a brilliant combination. In large rooms, you can not be afraid to use a black top and a white bottom. As a decor, you can use bright accessories and textiles.

Turquoise, brown and white

With the help of these colors, a rather delicate combination is obtained. Turquoise, used in a variety of ways, represents the sky, air and water, so it is welcome in bathroom design. Brown is earth, trees, life. It adds warmth to cold blue hues and makes the room more calm and mature. White color in this trio plays a unifying role and helps to smooth out the brightness of one and the darkness of the other.

It is not necessary to use only furniture in brown. It can be both walls and decorative elements. If there are concerns about the excessiveness of brown, then you can take the white-blue range as the primary colors, and lighten the brown by a couple of tones.

Beige and creamy white

A warm and cozy atmosphere can be created using two shades - Mocha and creamy white. Sometimes even a large room needs a depth expansion. To do this, use several shades of Mocha, more intense than the main one. Visual dynamism in the room is created using rectangular tiles laid horizontally.

shades of gray

Monochrome in gray has always been and, for sure, will be a classic design option for any room, including the bathroom. In order for the bathroom and toilet to look luxurious and sophisticated, wall cladding should be decorated with marble slabs. It is precisely because of its unique beauty that marble has been used since the time of Ancient Rome to decorate palaces. Natural tiles are quite expensive, so you can use its high-quality replacement.

Blue and yellow

Proper use of these two colors will make the bathroom bright and fresh. It must be remembered that blue belongs to the cold range, so to smooth out the effect of coolness and dampness, you need to dilute it with a warm color, such as yellow. Although it is difficult to associate the color of the sea wave with dampness.

To keep the room from appearing too warm, use blue on the decor elements. A small number of accents in the form of a rug, towels or curtains will diversify the interior. It will look good lining in the use of mosaics or a toilet bowl of the corresponding color.

Double Complementary Colors

This option is for the bold and enterprising, because it involves the paired use of two colors located on opposite sides of the color wheel. Not only that, you can use a double pair combination to make the interior even more picturesque. In order not to be full of eyes, it is necessary to dilute the combinations with neutral colors, for example, white, milky, beige.

Advantages and disadvantages of painting bathrooms

A good alternative to expensive bathroom refinishing is wall painting. Below are some of the benefits to help you make the right choice of paint for your walls.

Advantages:

This is a significant cost savings. Even when choosing the most expensive paint, the costs will still be less than if tiles were used as cladding. This is easy to check without even starting repairs, but simply by counting all the costs of materials on paper.
Aesthetic appearance of the bathroom. With the help of a wide range offered by the manufacturer of paints and varnishes, you can not only create exactly the desired shade, but also draw real masterpieces.
Ease of painting. Compared to other types of finishes, so little time and effort is spent on painting that you can change the color of the walls as often as you like.

But there are also disadvantages to using bathroom paint:

For high-quality painting, you need to pre-prepare the walls, and so that they are perfectly even. Any flaw, roughness or unevenness will be clearly manifested and conspicuous. In addition, this can affect the amount of costs, since a lot of materials will have to be spent on leveling the walls. To level the walls, you will need to hire specialists, which in turn will also require some funds.
Painted walls require a certain amount of care, because otherwise a beautiful renovation will quickly lose its appeal.

Types of paints for bathrooms

In order for the interior to please its owners for many years, it is necessary to choose the right paint. First of all, it is necessary that one of the characteristics is water resistance, because the bathroom is quite humid. That is why below are the coatings adapted for bathrooms:

Acrylic paint. This type of coating is used for any surfaces except metal. Therefore, it is suitable for use in the bathroom. And a wide variety in the color panel will provide an opportunity to realize any fantasies. For example, get a rich color of the sea wave.
latex paint. A popular coating that is used for rooms with high humidity. The attractive appearance of finished surfaces and wear-resistant characteristics make latex paint a fairly popular material. As additional advantages, one can note its ability to lie down on any surface. At the same time, further maintenance is required minimal.
Water based paint. One of the most demanded finishing materials on the market. It has excellent characteristics and advantages, such as environmental friendliness, wear resistance, aesthetic appearance and low cost. The material perfectly tolerates moisture, but where there is direct contact with water, it is better to lay tiles.

Having stopped the choice on painting the walls, the question of choosing a manufacturer becomes quite natural. It will not be a novelty that there are brands that have proven themselves from the best side, thanks to strict adherence to production methodology and quality compliance. Below are some of them:

Tikkurila is a Finnish manufacturer known to many over the years for its quality products. A wide range of shades and the presence of a line with a special moisture resistance make it possible to use Tikkurilu for painting walls in the bathroom.
dulux. The brand is a market leader in the production of high-quality colorful materials.
Jobi. Is a German brand that strives to provide only high quality products.

Methods and types of applying paints

Smooth walls are quite boring, so global manufacturers, together with designers, seek to decorate the interior in various ways. One of these methods is texture paint, which allows you to create certain textures on the surface. Moreover, the resulting textures can be painted after application or in advance.

Advantages of texture paint:

It is not necessary to carefully prepare the surface.
Easy to apply, so you can handle without the involvement of specialists.
Affordable cost.
A wide range of colors that allows you to create different shades.
Excellent wear characteristics and chemical resistance.
Long service life without loss of color and appearance.
Environmentally safe for humans.

To apply such paint, it is enough to have a roller, a spatula for grouting defects on the wall and a paint tray. Rollers are regular and textured. With the help of the latter, the effect of pattern overlay is achieved. Such rollers can imitate wood, flowers, frosty patterns and more.

In order to get a pronounced texture, you need to thoroughly dip the roller into the paint. It is advisable to paint quickly and draw lines from corner to corner. Otherwise, joints will be noticeable that will spoil the appearance. If in the process of work the pattern has become not so clear and pronounced, then the roller should be thoroughly washed under running water. After application, the paint should be allowed to dry for 6-8 hours. After checking the quality of work, you can apply a second layer or use another paint as a decor.

Using paint as a wall finish in a bathroom is not a new idea. This is an economical and easy way to create a specific bathroom interior design. Various colors, textures and application methods allow you to create an original design of the room.

We decided to decorate the bath and toilet with textured paint. Previously, I had to tinker and use grout and putty for the walls, because they were in a terrible state. Blue became the main shade, white was chosen as an addition. Plumbing fixtures, including the toilet and bathtub, were also in white.

We have a separate bathroom and the restroom required repairs as well as the bathroom. But we used different shades for decoration. It turned out to be a good design decision. Ceramic tiles were laid on the bathroom floor, and as a decor, we chose a grout composition similar in color to the walls.

August 16, 2016
Specialization: a professional in the field of construction and repair (a full cycle of finishing work, both internal and external, from sewerage to electrics and finishing work), installation of window structures. Hobbies: see column "SPECIALIZATION AND SKILLS"

Painting the walls in the bathroom is one of the simplest (at first glance!) Methods for decorating a room. It is because of this apparent simplicity that it is often chosen by inexperienced craftsmen. But then they almost certainly face difficulties and understand that in order to achieve a result, it is necessary to make no less effort than when finishing with other materials.

Be that as it may, even a beginner can learn how to paint the walls in the bathroom - and for this, in the article I will share my own experience, as well as give recommendations from other masters.

Work materials

Moisture resistant paints

The traditional method of finishing a bathroom is to tile it. However, this technology is very expensive, and even requires certain skills, so often beginners are looking for how to paint the walls in the bathroom instead of tiles.

For finishing surfaces that are almost 100% likely to be in contact with moisture, you can use a variety of compositions:

Water-based paint with additives that protect it from erosion. By itself, water-based emulsion does not perceive moisture well, so areas where water gets with a guarantee should not be finished with such material. But the question of whether it is possible to paint walls with water-based pigments that will not be in direct contact with moisture can be answered positively.
Oil paint is an option that is practically not used today, but earlier it was one of the main ones. Yes, it is characterized by acceptable moisture resistance, but at the same time it dries slowly, and with temperature changes in the room, it is almost guaranteed to begin to peel off from the base.

Alkyd enamel is probably the best choice in situations where the priority is to protect the base from getting wet. After polymerization, the enamel layer becomes practically airtight, and the wall acquires almost absolute moisture resistance. But if you need paint without , then here alkyd compounds will not work - even a few days after application, a kind of “aroma” will be felt.
When choosing which paint is better to paint the walls in bathrooms, experts most often prefer acrylic (latex) pigments. In principle, it is really difficult to find the best option: acrylic and acrylic-latex complex have good hiding power and good adhesion to any surface, they are non-toxic and can be easily applied to walls. The moisture resistance of acrylic is quite acceptable: if you do not rub the wall with a sponge and detergent and remove wet spots in a timely manner, then the finish will last for more than one year.

Silicone wall paint in the bathroom is another very worthy solution. Silicone formulations are characterized by increased moisture resistance, and if it were not for the price (it must be admitted, it is considerable), then I would safely recommend these pigments as a universal solution.

Washable covers - what are their advantages?

Tiling and painting the walls of a room like a bathroom have a common function - in addition to decorating, they also protect the load-bearing surfaces from moisture. But in some cases, simple protection is not enough: where water drops regularly, washable paint is needed.

Between moisture resistant and washable pigments, it is worth drawing a clear line:

Moisture-resistant paint is called, which is able to withstand a long time in a room with high humidity without changing its appearance and other physico-chemical parameters. If water periodically gets on it, it's okay, but regular moistening will provoke a rapid degradation of the paint layer.

Unlike moisture-resistant paints, washable paints form a dense film on the base, which is not only not afraid of moisture, but also actively resists swelling, abrasion and chemical agents.
In other words, any washable composition is moisture resistant, but not any moisture resistant paint can be washed, especially regularly.

If we talk about choosing a pigment specifically for painting bathroom walls with my own hands, then I would recommend stopping at acrylic compositions with increased moisture resistance. Nominally, they are not washable, but at the same time they tolerate various impacts very well. More durable materials will be needed in exceptional cases - for example, when painting a room with an open-type shower stall installed.

Painting technology

Surface preparation

In this section, I will tell you how to paint the walls in the bathroom with your own hands, providing the decorative layer with a sufficient margin of safety and durability. The main difficulty lies in the preparation of surfaces, which is why I will pay maximum attention to it.

Many people wonder if it is possible to paint the walls over the old paint. There is no consensus on this matter among the masters, but from my point of view, such a decision is an unjustified risk.

Even if today it seems that the old finishing layer is holding up well and is not going to peel off, then who will guarantee that it will not react with a primer or paint and will not fall off in just two to three months.

That is why, first of all, we need to figure out how to remove paint from the walls. I usually go like this:

To begin with, I perform mechanical cleaning - I take a spatula and use it to clean everything that is peeled off. I act quite intensively, but carefully: it is advisable not to damage the plaster layer, since the defects will then have to be leveled with putty.
As a rule, with a spatula it is never possible to remove all the paint, and you have to decide how to peel off the residue. Here a building hair dryer comes to the rescue: I heat up a layer of material, wait until it begins to soften and remove it with the same spatula.
If not, then there is another answer to the question of how to remove paint from the walls in the bathroom: chemical washes! I buy a bottle of the product, apply it to the painted area, wait for the components to react - and then remove the partially dissolved mass with almost no effort.

Finally, if you plan to cover the bathroom with drywall or complete re-plastering, then deciding how to tear off the paint , you can not be delicate: we take a grinder with a brushing nozzle, turn it on and clean off everything that is on the walls, including putty and part of the plaster.

There will be a lot of dust and debris, so we wear goggles and a respirator.

To begin with, a rough leveling of the walls is performed - either plastering or finishing with moisture-resistant drywall. At this stage, I try to get perfectly flat planes with a minimum number of defects..
After the plaster has dried, I putty with a moisture-resistant compound. Also, putty should be used to process the seams between the plasterboard plates and the places where the sheathing is attached to the frame.

The dried putty must be sanded using abrasive meshes. First, I rub the surface with a large abrasive, and then I “finish” the planes with a fine-grained finish sandpaper. The less irregularities there are on the plane, the better the painted wall will look.

When grinding, a large amount of gypsum dust is formed. When mixed with paint, it degrades its properties, so I prefer to vacuum the walls for the best result.

Preparation for painting ends with a primer. For work, I use a moisture-resistant acrylic composition, which I apply at least two layers. In order for the acrylic to polymerize, I pause at least 2-3 hours between approaches (the instructions for the primer will tell you the exact time).

Finally, we need to think about paint protection for all other surfaces. To do this, we cover the floor with newspapers or plastic wrap, and glue the ceiling around the perimeter with masking tape. It is also worth covering the pipes and plumbing with polyethylene or a dense cloth: no matter how carefully we work, the drops will still scatter.

If our design project involves the use of two or more colors, then the boundaries between them should also be marked with masking tape. This, by the way, is quite a reasonable solution from a purely practical point of view: the lower part of the walls is painted with a washable pigment of a darker shade, and the upper part is simply a moisture-resistant light paint.

We paint the walls

To paint the walls in the bathroom, we will need:

a roller with a telescopic handle (the so-called fishing rod);
several brushes of different shapes for painting in hard-to-reach places;
paint tray;
gloves;
respirator;
protective glasses;
scarf on the head;
shelving or goats - for high rooms;
rags and solvent to remove paint drips.

Coloring begins with the preparation of the pigment:

We open the container with paint, and, if this has not been done before, add color to it. Thoroughly mix the tinting liquid, achieving uniform coloring and matching the color with the reference sample.

You can take pre-tinted paints, but I prefer to work with a white base: there is nothing difficult in adding pigment, but the savings are quite tangible.

Simultaneously with tinting, we check the container for the presence of insoluble sediment. The thing is that acrylic, latex and other paints, if stored improperly, can delaminate, losing all their positive qualities. You can get rid of sediment by filtering the paint through a special filter or just a nylon stocking.
Immediately before work, mix the pigment again to increase uniformity. Next, pour a small amount of the composition into the tray and get to work.
We take a roller, dip it into the paint and roll it several times over the corrugated area of the tray to distribute the pigment over the pile.

If we did not succeed in sanding the walls with high quality, and the defects are visible even to the naked eye, then the first layer can be applied with a brush. The consumption will be higher, but a thicker layer will hide some of the irregularities.

First, we paint over the corners and joints of the walls, and then we begin to gradually process the planes, regularly adding paint to the roller.
We leave the first layer to dry, and after it dries, we repeat the coloring. We carefully rub the pigment over the surface, trying not to leave streaks, but we also avoid non-painting.

Usually, two coats of paint are enough to achieve the desired result. If a light composition with low hiding power is used, then sometimes three or four layers have to be applied to mask the base.

Room drying

So that the applied decorative material does not begin to fall off the base in the first weeks, it is necessary to provide it with optimal polymerization conditions:

First, and most importantly, ventilation.. The humidity level in the bathroom is usually higher than in the rest of the apartment, because in such an environment the pigment will dry for a very long time. You can speed up the process by ensuring the effective removal of moist air in a natural or forced way.

Further - the absence of drafts. If we fail to meet this requirement, then the polymerization will be uneven, and stress zones will appear in the paint film, which will sooner or later lead to the formation of cracks.
Finally, a constant sufficient temperature is also important. In the bathroom, it is necessary to ensure the temperature regime at the level of +20 .. + 250С with minimal differences - then there will be no peeling or peeling of the paint layer.

Conclusion

Painting the walls in the bathroom is not such a simple undertaking. However, there are chances of success, and considerable ones: just follow my advice, as well as the recommendations given in the video in this article.

It seems to me that this information will be quite enough to achieve a decent result, but if questions arise, feel free to crush them in the comments: I hope I can be useful!