Camping stoves and heating a tent in winter and summer: criteria, types and methods, implementation. Winter stoves for fishing Fishing stove for heating a tent

For those who go out into nature not only in summer, but also in winter, in the off-season, the problem of heating a tent is acute. If you don’t want to go to the store and buy a ready-made stove, then you can easily make it yourself.

Collapse

Stove models in demand for manufacturing work on:

• gas;
• alcohol;
• firewood

Each stove has its own advantages and disadvantages, season of use, and fuel consumption. Let's look at each in more detail.

Gas infrared

In this method we will tell you how to assemble such an installation yourself, because... building an infrared burner is very difficult.

Materials and tools

For production you will need:

When choosing a ceramic heating pad, it is better to give preference to small models - gas is consumed more economically. The peculiarity of infrared heating is that it heats objects, not air, so if possible, it is good to have a stand under the heating pad, which will allow you to direct the energy.

Manufacturing instructions

The diagram clearly describes the principle of operation of the stove. The gas-air mixture allows you to achieve high temperatures with the least risk of fire.

Principle of operation

Essential elements

1. Place the nozzle into the connection hole of the infrared burner.
2. Attach the retaining ring on the reverse side.
3. Place a clamp on the oxygen hose to prevent gas leakage.
4. Connect to the nozzle, tighten the clamp with a screwdriver.
5. Connect the gas cylinder to the hose, also using a clamp.
6. To light the heater, you need to hold a match to the ceramic heating pad. It is forbidden to ignite gas near the nozzle. Fuel can be propane, argon and natural gas. When replacing fuel, you need to change the type of injector. The gas camp stove is ready.

Type of infrared gas stove for a tent

Operating rules

A camp stove for a tent should not only heat the space, but also serve as an assistant in cooking.

Infrared heaters are not intended for this, but craftsmen have learned to cook on the following tiles:

• You need to place the heating pad with the radiating side up, and place two stones or bricks on the sides.
• Place metal rods or skewers on the bricks.
• Place dishes on top for cooking and heating canned goods.

A 200g can will last for 2 hours, after which you need to replace it with a new one. The gas cylinder must stand upright. It is prohibited to leave the stove unattended. Ventilate the tent from time to time. The surface temperature of the ceramic heater is 800-900 degrees.

From a can of alcohol

The debate about how best to use alcohol, for indoor or outdoor heating, will never end. This does not prevent tourists all over the world from using it as fuel for mini stoves for tents. The weight and dimensions of this design are insignificant; it is convenient to take on a hiking trip.

Materials and tools

To make a homemade camping stove you will need:

1. Any tin can.
2. Nail or awl for making holes.
3. Alcohol 96%. Vodka won't do.
4. Metal cover
5. Knife and scissors for even cutting of a tin can.
6. Ruler.

Manufacturing instructions

To make an alcohol stove, no complex diagrams are needed; the principle is simple and accessible, as are the materials.

From a beer can:

Operating rules

Such a burner must be ignited in a special way:

Such camp stoves for tents are used in the off-season; the design will not give a large increase in temperature, but it will allow you to heat canned food and boil water. The stove will boil one liter of water in 9 minutes at home; when camping it will take longer, depending on the ambient temperature.

From a pipe on wood

If the trip is planned for the winter, you cannot do without a serious heating device. Any stove should not be left unattended, especially a wood stove. Purchased models of the best tent stoves are equipped with a spark arrester and an additional chamber for complete combustion of gases. It is difficult to make additional cameras in homemade structures.

If you remove the chimney not vertically, but at an angle of 30 degrees, you can increase the efficiency by 30%. A simple mesh in the chimney is used as a spark arrestor. Thanks to the installation, you won’t have to wait long for heat; the stove heats up the space instantly.

Materials and tools

When making a stove for winter fishing with your own hands you will need:

• Chimney pipe 200mm.
• Clamp for plugs 200mm – 2 pcs.
• The chimney pipe is 80mm, the length depends on the height of the tent.
• Plugs 200mm – 2 pcs.
• 80mm clamp.
• Legs from a travel chair.
• Sheet of tin.

Manufacturing instructions

The diagram is quite general, but shows the principle of operation. The shape of the oven depends on the available materials and capabilities. If you don’t want to weld parts, you can use a simpler method described below in the instructions. Tourist stoves for tents should be collapsible and light in weight.

Operating rules

The operating rules are simple:

• The stove must not be left unattended; non-flammable materials must be placed under the structure, and the chimney pipe must be insulated from the tent. This stove will easily heat a 4*4m tent.
• After use, allow the metal to cool, pour out the ash, and disassemble the stove into parts for transportation.
• Ventilate the tent, check the draft and tightness in safe conditions before leaving.
• All openings must be precisely adjusted to prevent smoke leakage.

A stove for a winter tent is made with your own hands in a day, and lasts for several years.

Which stove is best to use in summer?

In summer, the oven is needed more for heating and preparing food, tea, coffee. There is no point in pulling gas cylinders or wood stoves - heating the tent is not needed.

The best solution would be a mini-alcohol stove for a tent. Light weight and compact dimensions allow each member of the camping trip to take their own homemade stove.

The only drawback in comparison with ready-made branded designs is the inability to transport the stove with filled fuel. But this is not a significant drawback - putting a bottle of alcohol in your backpack is not difficult. Long-burning stoves are used for winter tents.

Which stove is best to use in winter?

All three types of stoves are suitable for a winter tent. Winter fishing involves staying at low temperatures for a long time; the holes should not freeze, otherwise fishing will not take place. The difference in temperature in the tent and outside without heating devices will not exceed 2-3 degrees, which is not noticeable at -20C.

• Most often, a long-burning gas infrared heater and a wood-burning stove are used. They provide good heating and increase the temperature in the tent by at least 15-20 degrees. The gas model is suitable as a camp stove for cooking, it heats up the space perfectly, it is compact and lightweight.
• A more economical option would be a wood stove. The steel structure is easy to transport. The folding stove can be quickly assembled and disassembled. If fishing is planned near plantings or forests, there will be no problems with collecting firewood; otherwise, you will have to bring fuel with you. There is also a risk of carbon monoxide poisoning if the chimney pipe is not sealed. Even if a homemade stove for a tent is made according to technology, it is necessary to ventilate. Wood stoves for winter fishing tents are used for large tents, and gas stoves for small ones.

Conclusion

The stove brings warmth and a subtle aroma of tea into the tent. With a huge selection of ready-made models, tourists and fishermen still prefer to make long-burning camp stoves with their own hands.

Each model described above has advantages and disadvantages, although camping stoves for tents cope with their duties no worse than expensive branded ones. A tent without an awning retains heat worse, but a real tourist will not be stopped by the cold when his soul calls for a hike.

←Previous article Next article →

Lightweight portable stove for making food and fishing tents

Autumn, first ice, deep winter, last ice, spring. For every fisherman, all these periods are associated with a time of hope, anticipation of a catch, for which he sacrifices comfort. Winter suits for fishing and hunting Is it worth the sacrifice? After all, there is a cheap, lightweight wood-burning camping stove, the design of which will allow you to safely heat a tent, cook divine fish soup, and just take a nap in the warmth, without thinking about the need to add firewood.

Hiking and tourist stoves for tents - keep warm in any weather

The main difference between camping and folding stoves is the ability to provide heat using any of the available natural resources. In other words, dry wood, firewood of any quality, even raw. After all, you are unlikely to have the time or ability to conduct gas or find coal! You will only have the opportunity to use specifically wood as fuel.

That’s why our design department has developed, and we want to offer you, a successful design for a mobile stove that can warm you up in any bad weather. Rain, wind, prolonged snowstorm, or any other bad weather will not be a reason for you to cut short your vacation or trip.

The main thing in the design we propose, which was developed with a huge number of field tests, is the following:

Low weight and compact dimensions of the product when folded (assembled). It’s easy to move such a stove any distance; it won’t become a burden for you.

The ability to use even raw firewood, you will never have problems finding fuel for such a stove, it is actually under your feet.

The highest heat loss of a tent stove heats the air in the tent in 2-3 minutes when the operating operating mode is reached. With all this, the low consumption of firewood will not force you to get up at night for additional fuel.

Read also

Fire safety while observing the rules for operating the stove. You can use it for heating, or make any culinary camping masterpiece, rest assured that our stove for bathhouses and fishing tents will not cause a fire and will not create a danger for of your life.

Camping folding stove - the best for a fishing tent

Heat exchanger. Heating a tent in winter while fishing.

Heating a tent in winter is a pressing issue today for many fishermen who spend several days on the ice.

Stove for winter tent (fishing).

Stove for winter tents ( fishing). Winter tents for fishing inexpensively, buy tents for. Collapsible, lightweight stove for hiking.

If necessary, the mini-stove can be extinguished almost instantly; it is enough to simply block the access of oxygen (air) to the combustion zone and wait for the coals to cool.

You will spend the whole night waiting for a bite at one point, or fish several catchable places with the transfer of a tent and our camp stove, without losing comfort and warmth. And also keep in mind that thanks to such a hiking ovens, you are provided with boiling water and heated homemade sandwiches; no fisherman should have to explain the meaning of such trifles.

Tourist mini stove for fishing- just one load of firewood for the whole night

What is good about a small mini stove for a winter tent, if you can buy it at the manufacturer’s price, that is, from us. In addition to favorable prices, we offer:

1. Thoughtful ergonomic design, when folded, our mini oven will not take up extra space in the trunk of a car. Such a camping stove is easy to transport on ice or off-road, the minimal weight will not become a burden for you, and the benefit from such luggage is maximum.

2. High heat transfer and versatility. You can always warm up, heat up dinner or boil tea. Opportunities ovens Enough even to prepare a full dinner.

3. Winter suits for fishing on sale by huntsman suit winter suit for women. Maximum efficiency, one stack of firewood at night, and this will provide you with a restful sleep while waiting for the morning bite. Prepare 2-3 times less fuel than you are used to using conventional mobile stoves.

4. Guaranteed safety when used in tents of various types. The winter fishing tent is a layer bottom furnace winter tent for. Even with strong heating of the combustion chamber, all external surfaces intended for carrying and adjusting draft do not become hot. Adjust the intensity burning wood or move the oven to any place convenient for you.

By purchasing products from us, from a manufacturing company, you are guaranteed to protect yourself from counterfeits, which can be potentially dangerous when used in a confined tent space. Remember, any fake will not only not keep you warm, but will also become a threat to your health. of your life.

On a hike, the tent becomes shelter from bad weather. It protects from moisture and wind, but in cold weather even a good sleeping bag will not save you from the cold.

Therefore, lovers of nomadic holidays come up with various mobile heating systems.

Types of heating for tents

Which tasks heating must solve:

1. Heating and lighting tents in moderate frost without providing sleep. Ideal for fishermen - so that the holes do not freeze. Open fire systems are suitable - gas burner, multi-wick candle in a tin can casing, kerosene lantern“bat” with a heat exchange nozzle. Some fishermen use catalytic heaters - disposable chemical heaters based on aluminum alum (they do not provide a significant increase in heat).

Photo 1. When installing a metal stove in a tent, you must take care of a safe chimney.

1. Heating overnight stays during short hikes. A massive stainless steel metal stove or a gas infrared heater with a chimney are suitable.
2. Heating tents using wood for long hikes. The main characteristics are lightness, reliability, absence of carbon monoxide, and the ability to use local fuel.
3. Tent heating in extreme conditions of mountain passes. The main thing here is ease and efficiency. Gas burners with tourist gas are ideal 5 liter bottle.

Attention! Problem carbon monoxide- the main thing you should pay attention to! Just three breaths lead to severe poisoning, loss of consciousness and death! Don't neglect common sense for the sake of momentary comfort.

Heating the tent depending on the location of the firebox can be internal and external.

• Internal heating requires removal of combustion products, as well as placing the stove in a tight space.
• External heating - transfer of temperature from the combustion source to the tent without the admixture of carbon monoxide.

Is it possible to install an economy stove?

A potbelly stove is suitable for a short winter hike. made of thin-walled steel. It will heat a large tent, and transporting a heavy stove in winter makes it easier to use a sled or drag.

She consists of a firebox and a chimney. The firebox door must provide regulation of combustion intensity, the entire structure must be sealed.

Frame ovens gets very hot. On the one hand, it is a plus; it is used as a camp stove for heating a kettle or food. The downside is the risk of fire. The wall of the tent near the stove should be lined with foil insulation; the valve at the outlet of the chimney should be made of heat-resistant fabric - a fire hose or a fireman's suit.

Install and heat such a stove Just— retractable legs are installed, the chimney is passed through a valve on the roof, and firewood is laid.

Minus - short battery life, opportunity reverse smoke when throwing wood and strong wind, sparks from the pipe with a strong flame, relatively large weight.

Efficient heating with a dry pipe system. Drawing

An original and proven method of heating can be a dry pipe laid through a Finnish candle fire. If the tent is large, you can run the pipe into a fire or smoldering coal pit. This method is just gaining popularity, but it outperforms others in its simplicity, efficiency, safety and transportability.

Photo 2. Drawing of heating a tent using a dry pipe system. Cold air moves through the pipe, being heated by the fire along the way.

You might also be interested in:

How to make a dry pipe with your own hands: materials and tools

No special tools are required. Enough metal files, files, sealants made of heat-resistant silicone.

It is better to use as pipes aluminum rods from a vacuum cleaner and a bracket from an armored bed, having a shaped shape, which is ideal for installation in a “Finnish candle”. All joints must be tight and open with noticeable force.

How the system works. Does it burn for a long time?

Finnish candle - a fire inside a log. It's done like this: log 50-70 cm long splits, with an ax the middle is selected and instead of it, kindling is laid. The log is collected and tied with wire. The candle is installed above the ground, the draft of burning gases passes through the burning channel. The intensity of combustion is regulated by the lid and installation height.

You can adapt a Finnish candle for heating a tent, passing the pipe through the burning center log. The pipe should be shaped, the log is “put on” on the vertical section.

Cold air is taken in through the lower horizontal section, heated in a smoldering log and supplied through an air duct into the tent.

In severe frosts, the air duct is better insulate with non-flammable basalt wool insulation. Then heat loss will be minimal.

Advantages this heating method:

• Safety. The firebox is located outside the tent, combustion products do not mix with the heated air. The possibility of fire or suffocation is practically eliminated, and by increasing the lower air duct, we move the air intake away from the combustion source.
• Ease of manufacture. Ready-made tubes connected into sockets are commercially available.
• Transportability. The weight of the entire installation, including the axe, is total 2 kilograms.
• Versatility use. Wherever there is a log of a certain length, you can light a Finnish candle. The heartwood of a tree burns better - it has a certain moisture content.
• Duration burning log - from 3 to 6 hours depending on thickness. This is quite enough to sleep warm.

What to consider when using dry pipes

When heating a tent using a dry pipe passed through a Finnish candle, a simple fire or a coal pit, the following difficulties may arise:

1. Inappropriate pipe diameter. The larger the tent, the larger the diameter of the pipes.
2. Leaks at joints pipes Carbon monoxide enters through them. The diameter is selected so as to fit perfectly tightly. There should be no joints inside the fire pit.
3. The air intake is located too close to the fire. Ideally, it should be extended and taken out of the tent. Air exchange will be ideal, this will save heat.
4. It is better to use as a heating pipe stainless steel 1-2 mm thick. For lightness, supply pipes are made from aluminum or thin stainless steel.
5. You can protect the fabric from fire by stretching it between the fire and the tent screen made of frozen wet gauze.
6. To the fire did not tilt and did not fall, it is advisable to prop it up or tie it to a support.

In descriptions of the adventures of geologists, the method of heating a hut using clay pipes is considered a curiosity. However, if you have a sealed dry pipe system in this way You can heat a small two or three person tent.

"Fisherman's Stove PS10" is a compact portable stove that runs on charcoal and pressed briquettes. It has a volume of 10 liters (diameter 20 cm, height 40 cm), which makes it the most compact and lightest in its class, while being powerful enough to heat a fishing tent during winter fishing. One pack of coal or package of briquettes is enough for 10+ hours. Combustion activity is regulated by the blower in wide modes. Combustion occurs inside a closed stove; all combustion products are discharged through the chimney behind the tent. The stove is suitable for automatic and arc tents such as Cube, Umbrella, etc. The delivery set includes an additional protective screen to increase safety.

Note! This stove can also be heated with wood. If the firewood is dry, it will work perfectly; if it is damp, the stove will produce heat more slowly.

Watch the video - Review of the winter fishing stove “Fisherman PS10”

Why should you buy a Fisherman's Stove PS10 with a screen?

• Works on charcoal and pressed briquettes. Charcoal (for barbecues) is an affordable and very effective fuel. The calorific value of coal is almost three times higher than that of conventional firewood. The use of efficient fuel made it possible to create a stove of minimal dimensions, yet powerful enough to heat a fishing tent.
• Long and stable heating for a long time. Working with charcoal provides long-lasting and stable heating. One load of coal (about 600 g) burns for up to 3 hours, i.e. One 3 kg package of coal is enough for 10-15 hours of heating.
• Adjustable blower for air supply. At the bottom of the body there is a blower made in the form of a rotary disk with holes. The adjustment knob is located at the bottom of the housing. The blower allows you to regulate combustion activity within the required limits. The air supply occurs from below, through the grate.
• Folding legs and handles. The stove is installed on folding legs to avoid heating the tent floor. For convenience, the body has folding handles, which can be used to safely carry or rearrange the stove.
• Additional protective screen. To increase safety, the stove is equipped with an additional protective screen made in the form of drop-down wings (during transportation they fold compactly without increasing the dimensions). The screen completely removes radiation behind the stove and allows you to install the stove closer to the wall of the tent.
• Lightweight, compact, portable. The stove is a cylinder with a door and a removable top. It has a volume of 10 liters and dimensions - diameter 20 cm, height 40 cm. Pipes are placed inside the stove during transportation. For transportation, the stove is equipped with a durable cover made of 600 PVC Oxford fabric.
• Absolute safety. Combustion occurs inside a closed stove and all combustion products are discharged through the chimney behind the tent. The chimney pipe is recessed inside the stove to ensure safety and convenience during transportation. A spark arrestor is built inside the stove in front of the pipe, preventing sparks from flying into the pipe.

Design of a stove for winter fishing “Fisherman’s Stove PS10”

The stove is a cylinder with a door and a removable top. The body has folding handles for convenience. The stove is installed on folding legs. At the bottom of the housing there is a blower made in the form of a rotary disk with holes (the adjustment knob is located at the bottom of the housing). The air supply occurs from below, through the grate.

A bottom screen in the form of a plate is installed at the bottom of the stove. The screen performs several functions: reduces radiation under the stove, reducing the heating of the ice and its melting, fixes the legs in the open position, and prevents ash from falling out through the ash pan.

An additional protective screen completely removes radiation behind the stove and allows you to install the stove closer to the wall of the tent. In the open position, the screen works as a deflector (as on IR heaters). The deflector directs and focuses IR heat in a useful direction, increasing the efficiency of the stove.

During transportation, the pipes are placed inside the stove. For transportation, the stove is equipped with a durable cover made of 600 PVC Oxford fabric.

Specifications

Contents of delivery

• Cylinder (volume 10 liters, with door, removable top, folding legs and handles).
• Additional protective screen.
• Angled pipe (45 degrees) - 2 pcs.
• Straight pipes (33 cm) - 4 pcs.
• Metal cutting of pipe installation.
• Case bag.

Most of us enjoy outdoor activities. We all love fresh air, camping under the stars and winter fishing. However, we try to do this all year round. In the summer, of course, it is dry and warm in the tent, but in the off-season and in winter it is not entirely comfortable at night, so stoves are needed for heating and cooking.

Today we will talk about DIY tent stoves. There are a great many of them from simple to complex. Such a furnace should be light in weight, economical, and fire safety requirements, be easy to install and operate, have a long-burning function, and be reliable. This is the minimum set of requirements for . There are several options for installing a stove in a tent: in the middle on a special bracket, installation on legs closer to the wall of the tent, but if the snow is deep, then flooding is possible.

We are not at all interested in appearance, the main thing is that it provides us with warmth. Today we will try to tell you how to do it. For the mini oven you will need: two cans with a diameter of 10 cm and a height of 6 cm (you need to choose a jar with a larger diameter, than a 10 mm mug.); some sheet metal, bolts and washers, parts from an old antenna, metal mug.

Manufacturing: first option

You need to process the upper edges of the can, then cut out a 30 cm circle. with three tin petals and bend them at a right angle. You need to drill 3 holes with a diameter of 4 mm in the jar. in proportion to the arrangement of the petals. We place the circle on the bottom of the jar so that the petals fit into the drilled holes, then they are bent and dry fuel is placed. From the top edge you need retreat 20 mm. and drill 3 holes with a diameter of 5 mm. at an angle 120 degrees relative to each other. We put washers into the drilled holes and insert M4 bolts 4 cm long, fasten them with nuts.

Read also: Gas generator furnace: device and design

We place a metal mug on the bolts. For the legs we will need parts from the antenna. We need three legs and for them in the jar we drill 3 holes at an angle of 120 degrees. For foot tips use thermal insulation material. The most important thing: the legs should not be larger than the diameter of the can, since the design in this case it will be unstable. The lid can be made from another jar. You need to trim it by cutting the side on both sides, and bend slightly. The handle can be made from the power supply terminal, securing it in the center with a nut. The cover is needed to protect the entire structure from debris and to conserve fuel consumption. And, most recently, we drill at the bottom of the stove a pair of holes with a diameter of 5 mm.

The DIY mini-stove considered is one of the options for a stove that you can make yourself. Little tips for use: for quick ignition, add a couple of drops of kerosene; if you need to not only heat food, but also cook, then make cuts on the upper edge of the stove with a dotted line, this will increase functionality.

Manufacturing: second option (wood-burning oven)

This option is suitable for people who have a vehicle. It can heat a large tent and uses combustion elements (sticks and logs) economically. All we need to make it is a piece of steel pipe with a diameter 15 cm and 60 cm long., dimensions are approximate. The pipe must stand strictly vertically, since it is the basis of the entire furnace. Cut a rectangular shape at the bottom of the pipe hole about 30 cm high., width - a quarter of the circumference. You need to cut the pipe with a thin tool so that the width of the cut is minimal.

Return