At the beginning of this short article, it is necessary to stipulate that only mechanical locks need to rearrange the tongue. Magnetic locks can be mounted on doors with any opening side without rearranging the tongue, since the tongue itself has a rectangular universal shape.

The situation with mechanical locks is different. The tongue is made in the form of a triangle, where the side parallel to the axis of the lock ensures the door is locked. Accordingly, when changing the side of the door opening, it is necessary to rotate the lock tongue in the same plane, but with the other side.

Inexperienced installers or people who are encountering this problem for the first time may have the misconception that locks differ in the opening direction. Actually this is not true. All mechanical locks are universal and provide the ability to rearrange the tongue without disassembling the lock body.

Rearranging the lock tongue is very simple and quick:

After this simple operation, you will be able to install a lock on the door with both left and right opening. It is important to note that any lock fits any handles, including

When remodeling a room, any door, both entrance and interior, sometimes needs to change the direction of opening door handle. This is necessary if, for the convenience of the house owners, the door opening direction is changed. To those unfamiliar with the structure of locks, such a rearrangement seems like a big problem. How to change the opening direction of a door handle without damaging either the door or the lock? Obviously, in order for the door handle to open in the other direction, you need to move the tongue - this can be done in any current door handle.

Is it difficult to reposition the door handle tongue?

The tongues of today's locks are triangular in shape. The side parallel to the locking axis ensures that the doors are locked. Therefore, if the opening side changes, the tongue also needs to rotate in the other direction. Many people are mistaken in assuming the existence of certain right- and left-handed locks, due to which it is impossible to change the direction of opening the door handle. In reality, any door handle is universal - the reeds in modern handles do not even need to disassemble the locking mechanisms.

How to rearrange the door handle tongue?

First you need to place the lock mechanism on a flat surface. There is a hole near its center on the side opposite to the tongue. It is impossible not to notice the plastic ears on both sides. They are usually white or colored like the tongue itself. A long cone-shaped object (a Phillips screwdriver, ballpoint pen or pencil) should be lightly pressed on the ears. However, care must be taken not to break them. As a result of pressure, the ears open, releasing the tongue.

After the lock tongue is pulled out, it is easy to turn it in the desired direction. As a result, the direction of opening the door handle also changes. Now you need to return the lock tongue to its original place. To do this, you just need to press on it until you hear a soft click. When the tongue takes the correct position in the lock, the plastic ears will close by themselves.

In order to change the direction of opening of the door handle so easily, you should buy only handles with modern locks, the tongue of which can be easily strengthened with the other side. Otherwise, changing anything in the lock will be difficult, and sometimes impossible. Door handles that meet standards last decade, can be ordered on the website irbis-td.ru.

__________________________________________________

Almost all locks are not divided into right or left - they are all universal. Any lock is equipped with a system for turning the tongue. The systems differ slightly from each other, but in general they are fairly simple mechanisms.

Large keyed locks from Archie are equipped with a stop stop.

The stopper prevents the tongue from falling deeper than the level of the lock lining.

However, when inverted, the stopper falls and increases the movement of the tongue.

In this position, it becomes possible to turn the tongue over.

Most plumbing locks have the same system.

There is a hole on the back of the lock that is designed to rotate the latch.

By inserting a rod of suitable diameter into the hole and pressing on it, you can release the tongue, which is fixed in the guides of the lock lining.

A regular latch does not have any systems and its tongue is turned over by rotating the latch itself.

If this material was useful to you, then add it to your page in in social networks. You will help him become more popular.

Return