Voice alarm device bolide horn. Horn use.01 (Bolid) Voice announcement device How to connect the Bolid horn device to an amplifier

Subscribe
Join the “koon.ru” community!
In contact with:

Voice notification device, two channels of 10 W, up to 5 messages lasting 38 s, control via RS-485 or from a relay. Power supply from 220 V. Possibility of installing a 7 Ah battery. From minus 10 to +55°С

Designed to broadcast pre-recorded voice information about actions aimed at ensuring safety in the event of a fire and other emergencies.

The voice alarm device "Rupor" in its capabilities belongs to group 3 according to the NPB 77-98 classification. When using autonomous intercoms based on the Horn device, systems can be built that will be classified into group 4.

  • The device can be switched on to the alert signal transmission mode upon command from the Orion system network controller (Orion automated workplace, S2000M PKU) or from the control panel (or relay unit) of another fire alarm system; or manually
  • The device operates both as part of the Orion ISO and independently from it.
  • When using the device as part of the Orion system, it is controlled via a two-wire RS-485 communication line
  • If the device is used independently of the Orion system, it is controlled by violating one of the alarm loops built into the device; violation of each of the alarm loops corresponds to its own alert scenario
  • The device provides programming of a number of parameters: notification delay, notification time, pauses between voice messages, voice notification preamble (audio signal to attract attention), voice messages themselves, as well as notification priority
  • The device has the ability to play several voice messages according to their priorities (interruption of one notification by another - higher priority, sequential playback of messages with the same priority); this feature can be used to make changes to the personnel evacuation procedure (for example, if a fire spreads to one of the emergency exits)
  • Acoustic modules (AM) are used as executive elements of voice notification
  • Control of opening of the device case, control of notification and power channels
  • Indication of the device status: status of notification channels, status of internal alarm loops, power status of the device, etc.
  • Availability of self-test mode
  • Possibility of locking controls using a lock
SPECIFICATIONS
  • AC supply voltage - 220V/50 Hz
  • The voltage of the built-in backup power supply is 12V
  • Operating time of the device from the built-in backup power supply in standby mode, no less than 24 hours
  • Operating time of the device from the built-in backup power supply in alert mode, not less than 2.5 hours
  • The total duration of one or more different voice messages, not less than 38 s
  • Number of voice messages - up to 5
  • The range of reproduced frequencies of voice notification (along the electrical path) is from 100 to 9000 Hz with unevenness of no more than 3 dB
  • Number of notification channels - 2 parallel
  • Rated output power of the amplifier for one channel is 10 W
  • Nominal resistance of connected AM, not less than 4 Ohms
  • The resistance of the lines connecting the device to AM is no more than 3 Ohms
  • Number of alarm loops - 4 pcs.
  • Alert start delay time - 0 to 2 hours in 1 s increments
  • Setting the alert time - from 1 s to 2 h or without time limit
  • Overall dimensions, no more than -310x254x95 mm
  • Weight of the device with battery AKB-7, no more than 8 kg (battery must be ordered separately)

Technical specifications:

  • Rated power per channel (W): 10
  • Manufacturer: Bolide
  • Internal battery capacity: 7
  • Number of internal batteries: 1
  • Alarm line standard: 4 ohm
  • Power type: 12 V

Equipment consultations New question

Ask a question to a specialist about Horn voice alarm device

Question from: Alexander

Hello, it is planned to install a Horn device at the site, but the main characteristics of the device do not indicate the type of acoustic modules compatible with this device, as well as the output voltage at the output1 and output2 terminals.

  • Answered by: Boris Kuzmin Hello, the resulting resistance of these modules and the output power are indicated: at least 4 ohms and 10 watts per channel. Based on this, modules are selected.
  • Purpose:
    Voice notification device, two channels of 10 W, up to 5 messages lasting 38 s, control via RS-485 or from a relay. Power supply from 220 V. Possibility of installing a 7 Ah battery. From minus 10 to +55 °C

    Main characteristics:
    Switches on to the alert signal transmission mode upon command from the network controller of the Orion system (Orion automated workplace, S2000M PKU), or from the relay output of any control panel;
    Has a manual mode;
    In offline mode, an alert is triggered after a violation of one of the 4 alarm loops connected to the device, and each alarm loop has its own alert scenario;
    Provides programming of a number of parameters: notification delay, notification time, pauses between voice messages, voice notification preamble (audio signal to attract attention), voice messages themselves, as well as notification priority;
    Plays voice messages according to their priorities (interrupting one alert with a higher priority, sequentially playing messages with the same priority), providing the ability to adjust the evacuation order taking into account the direction of fire spread;
    Compatible with low-impedance acoustic modules (AM);
    Has control over opening the device body, notification and power channels;
    Supports self-test mode;
    Provides locking of controls using a lock.

    Buy Bolide Horn from Layta at an attractive price. Bolide Horn: description, characteristics, customer reviews, photographs and related products..

    Characteristics of Bolide Horn:

    Manufacturer BOLID Basic unit pcs Event buffer 255 Time the device is ready for operation, s 20 Time the device operates on battery power in standby mode, at least 24 hours

    The description of the product presented is for reference only and may differ from the manufacturer's technical documentation. We advise you to check the availability of the features and functions you have selected when placing your order. If you find deviations in the description, you can always report this by noting the error and pressing the SHIFT + ENTER keyboard buttons

    Voice alarm device, one channel 12 W, supports up to 127 messages lasting 80 seconds. Controlled via RS-485, powered by 24V or 2.2 Ah battery. From -10°С to +50°С

    Voice alarm device Horn isp.01 from Bolid company:

    Additional devices in the fire and security alarm system of the Horn series have stable characteristics and belong to the category of “Universal auxiliary devices”.

    The voice warning block "Humor isp. 01" is intended for the construction of warning and evacuation control systems (SOUE) of the 3rd, and when used in conjunction with the Horn-Dispatcher complex - of the 4th and 5th types according to the classification SP 3.13130.2009

    The unit is intended only for use as a component of a block-modular control device in a warning and evacuation control system in conjunction with the "S2000M" control panel or a PC with installed "Orion Pro" software.

    . The unit is switched on to the alert signal transmission mode by command from the ISO "Orion" network controller (Orion Pro workstation, S2000M control panel (S2000 REMOTE DOES NOT SUPPORT "HOORE"))

    The block provides configuration of a number of parameters: pauses between voice messages, the preamble of a voice alert (a sound signal to attract attention), as well as the voice messages themselves

    The unit has the ability to play several voice messages according to their priorities (interrupting one message with another that has a higher priority); this feature can be used to make changes to the personnel evacuation procedure (for example, if a fire spreads to one of the emergency exits)

    Low-impedance acoustic modules (AM) are used as executive elements of voice notification.

    The unit monitors the opening of the device case, monitors the serviceability of the notification channel and power source

    The block provides indication of the status of the notification channel, the status of the main and backup power, etc.

    Economical and lightweight design

    The unit is powered from an external source with a voltage of 24 V or 12 V (depending on the operating mode) simplifies installation

    Transmission of service and alarm messages to the S2000M console and Orion Pro workstation

    A wide range of BOLID brand devices allows you to choose a model to suit any request and functionality. A large selection will please companies engaged in the installation of fire and security alarm systems and their Customers.

    Technical characteristics Horn version 01 (Car)

    PARAMETER NAME PARAMETER VALUE
    . Number of notification channels
    . Nominal output power of one channel amplifier 12 W into 4 ohm load
    . Rated alarm line resistance at least 4 ohms
    . Connectable acoustic modules any low-impedance acoustic speakers with a nominal impedance of at least 4 ohms, for example AM-1
    . Total duration of one or more different voice messages up to 80 s
    . Number of sound clips up to 127
    . Number of alert scenarios to 10
    . Range of reproduced frequencies of voice notification (along the electrical path)

    from 50 to 15000 Hz

    . Alert start delay time 0 ... 2 h in steps of 1 s
    . Setting the alert time from 1 s to 2 h or without time limit
    . Light indication on the front panel 5 LED indicators
    . Built-in buzzer not less than 50 dBA at a distance of 1 m
    . Tamper sensor microswitch
    . Communication port (for work in ISO "Orion") RS-485, Orion protocol
    . Unit power supply, main 12 or 24 V
    . Unit power supply, backup 1 rechargeable battery, 12 V, 7 Ah
    . Operating time from the built-in backup power supply in standby mode at least 24 hours
    . Operating time from the built-in backup power supply in alert mode at least 5 hours
    . Exits to the fire station 1 ("Malfunction")
    . Output for powering external devices with stabilized voltage (12±2)V/0.2A
    . Uncontrolled Outputs 1 PC.
    . Relay "Fault" 0.1 A/350 V
    . Operating temperature range

    from -10 to +55 °C (with battery)
    from -30 to +55 °C (without battery)

    . Relative humidity up to 98% at +25 °C
    . Housing protection degree IP30
    . dimensions 211x165x89mm.
    . Weight no more than 1.5 kg (without battery)
    . Average service life 10 years
    . Block programming UProg.exe program
    . Installation type wall-mounted

    Alarm for office
    . Security and fire alarms for cafes and clubs
    . Alarm in the store
    . Security systems for warehouses and office premises
    . Autonomous alarm system for an apartment, house or cottage
    . Fire alarm for covered car parks, garages and parking lots
    . Comprehensive protection for government institutions (kindergartens, schools, other educational institutions)

    When choosing, pay special attention to carefully studying the technical characteristics, choosing suitable security detectors, fire detectors, special cable products, etc. The devices of the Horn line are one of the best in terms of price-quality ratio and are recommended for use in wide-spectrum security and fire alarm systems.

    Analogs of Horn isp.01 and other devices with similar characteristics:

    Buy and order delivery of fire alarm systems in Moscow:

    You can order and buy Bolid products (their analogues, detectors, control devices) through the online store of voice alarms on our website or order delivery and professional installation services in your premises in Moscow from the ABars company. (Attention, delivery is free for orders over 60 thousand rubles).

    Return

    ×
    Join the “koon.ru” community!
    In contact with:
    I am already subscribed to the community “koon.ru”