Simple DIY wooden lamp. Designer lamps made of wood with your own hands Homemade chandeliers with your own hands made of wood

Since ancient times, people have valued what was created by nature. In the old days, almost all household items were made from wood. And this is no coincidence. It is difficult to find a more environmentally friendly and safe material. And the natural beauty of the unique texture amazes with its exquisite outlines. That is why modern interior design cannot do without this valuable material. Wood can be used not only for decorating a room or for making furniture. Wooden lighting fixtures look unique, original and inimitable, especially if they are homemade wooden lamps. Often such an element in the interior is used to emphasize a certain style. Therefore, the configurations can be very diverse.

Simplicity and sophistication. Driftwood chandelier

Making a lamp from wood with your own hands is not that difficult. Moreover, some products do not even require a special type of wood. You can even use driftwood found in the forest. Moreover, each of them has a unique shape, each of its curves is perfect, since it is a creation of nature itself. Now the main thing is not to spoil its natural beauty during processing. A lamp made of wood (driftwood) will become not only a source of light, but also a wonderful ceiling decoration.

Manufacturing technology

Preparatory work consists of cleaning the driftwood from bark and unsuitable wood, as well as thoroughly drying it. Then the driftwood is thoroughly sanded using sandpaper. Based on the type of lamp, the necessary components are purchased. It should be remembered that wood is highly flammable, so a lamp made of wood requires the use of energy-saving lamps. LED ones are also suitable.

Holes for wiring should be drilled in special places. On the side of the branches that will be located closer to the ceiling, you can use a narrow blade to make grooves for the wire. After laying the wire, all holes must be filled with putty. At the ends of the driftwood, sockets are installed on which lamps and shades are attached. The driftwood is attached with chains to the ceiling. All wooden elements must be varnished. The wooden ceiling lamp is ready.

Japanese style. Desk lamp

Table lamps can be an excellent interior decoration. Wood is the best choice for making such a miracle. To ensure that the work does not cause unnecessary trouble, you should prepare all materials and tools in advance. To make it, you will need a processed piece of board, square (preferably the wood is the same), light veneer, wooden tenons, PVA glue, and a drill with a disk attachment. For such a lamp, a lamp with a small base is used. Electrical components also require a cartridge and a wire.

Manufacturing process

Making a wooden table lamp with your own hands is very simple, especially if you have the appropriate skills.

First you need to drill holes in the corners of the wooden plank. To do this, measure one and a half centimeters from each edge and outline the squares on which the vertical bars will be installed. Marks are made for holes in the center of each square. If the tenons are made by hand, then their size should be adjusted to the diameter of the drill. Otherwise, the drill should be selected according to the size of the dowels. There is no need to drill holes all the way through. Up to half the thickness will be enough. It is also necessary to drill holes in the bars and glue spikes there. In the center of the base board you need to make a large hole for the cartridge. If difficulties arise, you can simply drill a hole for the wire. Shallow cuts should be made between the holes on the base for the veneer. You also need a deep enough channel for the wire. The wire cord must be secured in the cut. A table lamp made of wood, created with your own hands, is almost ready. The last step left is assembly. The bars are glued to the stand, the cut veneer plates are inserted into the cuts. The original wooden lamp is ready.

Lamp made of wood and coffee service

Making such an original lamp is quite simple. To do this, you need to take a suitable size board made of valuable wood, pre-treated with stain and varnished. You will also need three coffee cups with saucers with holes in the bottoms (can be drilled). To enhance the decorative effect, it is best to use cups made of thin glass. The wires connected to the sockets are passed through the holes in the lampshades (saucers and cups) and attached to the board. All wires are brought out on the part of the board that will be hidden, they are connected to each other and to the main wire. This design can be mounted on the wall or hung on the ceiling with chains or a twisted cord. The option with a more modern one. But with the help of such a lamp you can also create the effect of antiquity. For this instead of cups and saucers, you can use clay pots, and the board itself can be rubbed with sandpaper.Such a wooden lamp will fit perfectly into the design of a country house kitchen.

Original arrow lamp

Dimensions are selected individually based on the characteristics of the interior. It looks quite impressive when the arrow lamp occupies the entire wall vertically. One such device is enough to illuminate the entire room.

When making such a miracle you will need imagination. The simplest solution is to take a long board for the base of the arrow and several small strips for the point and fletching. All parts must first be fastened together with glue. For reliability, you can additionally connect them with wooden plates and screws. It is best to use an outdoor garland as a lighting element. Based on its size, holes should be drilled in the wooden structure and light bulbs should be inserted there. On the reverse side it is necessary to secure the wires well with tape and glue. It will not look very neat, but all this will be hidden when installing the lamp.

With a little imagination, you can make such original lamps from wood. Photos may give some ideas.

Plank lamp

Each carpenter ends up with a lot of valuable wood scraps, which are usually difficult to find a use for, but there is no need to rush to throw them away either. You can make an unusual one from them. Moreover, for this design you won’t even need nails, but a lamp like this will come out of wood. The photo cannot even convey all its beauty and effectiveness.

To make it you will need seventeen identical sized boards. Multi-colored and different textured boards look more impressive. Each plank must be given a wedge shape. To attach the blades to the base you will need wooden pins. A hole is made in the base into which a cartridge with a wire is placed. The design is extremely simple to manufacture, but it looks amazing in any interior.

Log floor lamp

A real masterpiece of LED lighting technology is quite easy to make with your own hands. You can create an original LED lamp using an ordinary log, the dimensions of which depend solely on the idea.

To make a lamp you will need wood glue, a transparent tube, wood varnish, LED strip, a brush, a hammer, a saw and a drill.

Manufacturing sequence

A well-cleaned and dried log must be cut into uniform rings of approximately 5 cm. A hole should be made in the center of each ring, corresponding in diameter to the tube with LEDs. It should fit tightly there. Holes are made in the lower and upper rings to cover half the thickness of the log. A small hole is made in the base for the wire. Each ring is varnished. Then a tube with diodes is inserted into the holes of each of the rings.

In order to make the interior of a modern apartment or country house original, interesting and effective, you can make lamps from wood with your own hands. Photos of the most unusual specimens made from branches, clothespins and other wooden elements are shown below. There are simply a huge number of options.

In order to create wooden lamps with your own hands, you need to use your imagination. Floor lamps made from clothespins are simple, cheap and original. For such a lamp you need a frame made of metal rods and wooden clothespins. Its external outline depends on the bending of the frame.

A chic chandelier made of branches will transform any room. It's very easy to make it yourself. Thin branches of some trees do not even need to be treated. The wire is drawn from the main source, wrapping around each branch, and approaches the lighting socket.

Having imagination and certain skills, you can make your own wooden lamps with your own hands. The photos given in the article are only a small part of what you can come up with. Moreover, wood is the most environmentally friendly material.

Handmade wooden lamps perfectly complement the interior, making the atmosphere of your home warmer and more comfortable. Original wooden lamps have been in quite high demand lately, becoming a familiar element not only of home furnishings - they can often be found in cafes, restaurants, museums, and other public places.

Such a thing can fit perfectly into the interior and elevate it if you choose materials that best suit the situation.

Features of the material

Natural wood, in addition to its aesthetic properties, has a number of significant advantages. Products made from it are easy to use and environmentally friendly. When heated, wood does not emit toxic substances, but on the contrary, it has a beneficial effect on people with chronic respiratory diseases, having healing properties. This effect is especially typical for coniferous species.

Wood is a material sufficiently pliable that in the skillful hands of a master it can acquire exactly the forms that he intended. Therefore, any creative design ideas come to life. Luxurious photos of exclusive wooden lamps easily convince of this.

The material is quite versatile, due to which it can be used widely, in almost any type of interior. Interesting configurations and a variety of shapes allow the item to organically fit into any style.

Lamps made of wood in the interior look solid and noble, and besides, they go well with objects made from a wide variety of materials: plastic, glass, metal.

Along with the listed advantages, wood also has disadvantages. It is highly flammable, for this reason the products should not be placed in rooms containing fireplaces, gas stoves and other sources of possible ignition.

The material is very sensitive to temperature changes and high humidity, so placing wooden lamps in the bathroom or kitchen is extremely undesirable. In addition, wood attracts small pests - termites and other insects. It is advisable to coat the products with special protective compounds that will prevent their appearance and protect the material from deformation.

When using an electrical appliance, observe a number of simple precautions:

• place the light source at a sufficiently large distance from open fire (fireplace, stove);
• remember that the optimal location for the device is considered to be rooms with normal humidity levels and room temperature;
• wooden lamps do not allow the installation of ordinary incandescent lamps in them: their heating temperature is too high, it is unsafe; use LED, halogen, fluorescent lamps.

Application in various interiors

The versatility of wooden lamps allows them to be used in the design of a wide variety of rooms, regardless of style. They are most appropriate in the setting of a country house, decorated in country, Provence, and oriental styles. The combination of natural simplicity with sophistication is the most valuable quality of wood.

Original “antique” lamps made of wood are widely in demand in retro styles. They are often made in the shape of cart wheels, with candle-shaped lamps located around the circumference. This design is usually used in restaurants, bars, and hotels.

Ceiling models look great in large rooms and living rooms, bringing luxury and elegance to the interior. Spot lighting options are relevant for small rooms, especially if they have low ceilings.

Lamps of simple shapes, without any frills, are suitable for country style. They may look a little rough, but they will create a feeling of unity with nature and fit organically into the space without conflicting with other objects.

Oriental style requires the use of solid wood, welcomes clear shapes and lines, complemented by oriental motifs.

Retro is characterized by classic options or more original models, stylized as antiques.

Classic makes it possible to use stained glass; a lampshade for a lamp can be made from it; wooden structures have smooth, streamlined shapes.

High-tech allows you to create original designs by combining wood with metal, frosted glass and other materials.

How to make a lamp from wood with your own hands

Of course, by ordering a product in special workshops, you will receive a perfectly made, polished product. However, if you have experience working with wood, you can try to create an exclusive item yourself from the material that is available to you.

DIY wooden lamps are made from:

• branches;
• boards;
• bark;
• cuts;
• logs;
• veneer

If you have an idea that you can’t wait to implement, you can safely get started. First, the wood must be prepared by treating it with protective solutions and impregnations, and wait until it dries completely.

This stage is mandatory: an untreated product will not last long. The structure is then assembled and fastened together. We invite you to try several original options.

Driftwood lamp

This creative idea will not require much effort or expense to implement - use driftwood found in the forest under your feet. They are exclusive in themselves: every bend of the branch is unique. All you need to do is find a suitable specimen, clean it of bark and excess wood, then dry it thoroughly. For drying, a ventilated place away from direct sunlight is suitable.

After complete drying, you need to sand the driftwood well using sandpaper. Determine the side that will be attached to the ceiling. Using a blade, make grooves on it into which you will lay the wires. After finishing work with the wires, the holes must be carefully filled with putty, and then treated with stain and putty to match the color of the wood.

Chucks are attached to the ends of the driftwood, you can come up with different ways to attach them. When finished, treat the wood with varnish. It is necessary to lay several layers and dry each one. Choose acrylic or waterproof varnish.

You can also construct a table lamp or sconce in a similar way - driftwood will serve as an excellent base. This idea is easy to implement even if you do not have carpentry skills.

Chandelier made of branches

Gather carefully selected small branches together so that some of them are perpendicular to the ceiling. Next, you need to attach the lampshades to the ends of the branches, and carefully wrap the wires around them. Instead of branches, you can use real rhizomes if you are lucky enough to find one in the forest.

Find and implement your own ideas - wood gives you a lot of opportunities to experiment using your imagination. You will be rewarded for your creative impulses by receiving a designer product that will become an interior decoration.

Photos of wooden lamps

To create a comfortable and cozy atmosphere in a living space, you need to organize high-quality and technically competent lighting using different devices.

For lovers of original solutions, we recommend paying attention to wooden lamps that you can make yourself. Such products can recently be found in various cafes, catering establishments, museums and art galleries, and other public places.

Features and practicality of wooden lamps

Natural wood is characterized by high aesthetic properties. This is an excellent raw material that will allow skilled craftsmen to realize their wildest fantasies. However, despite the numerous advantages, the possibilities of using wooden products are limited by some of their disadvantages.

First, about the advantages:

1. Easy to use.
2. Environmental Safety. Even when exposed to high temperatures, no toxic substances are released. The use of natural wood can have a positive effect on people with chronic respiratory diseases. This is especially true when using products made from coniferous trees.
3. Wood is considered a malleable material from which various works of art can be created. The versatility of this raw material allows it to be used for the manufacture of products of different configurations and shapes that will fit into any interior.
4. Natural wood can be used in conjunction with plastic, metal or glass.

Flaws

Despite many advantages, wood has several disadvantages:

1. This is one of the most flammable materials, so it is not recommended to use it in rooms with fire sources - fireplaces, burners, etc. To increase fire safety, wood is coated with special protective agents that prevent burning and ignition.
2. Without a protective coating, wood will remain susceptible to sudden temperature changes and high humidity levels. This imposes other restrictions on wooden lamps related to use in bathrooms and kitchens.
3. Wood is home to a variety of small pests, including termites and bedbugs. To protect against them, it must also be covered with protective agents.

It is important to know! Immunity to temperature changes explains the fact that ordinary filament lamps cannot be used in wooden lamps. Ideally, these should be LED products, less often - fluorescent or halogen lamps.

Styles and shapes used

Any lighting device, regardless of the material of manufacture, according to the method of installation and use, can be divided into three main categories:

• suspension;
• point;
• ceiling

Pendant lights are becoming more common as antique and retro styles have returned in fashion in recent years. A ceiling chandelier made of wood is suitable for use in spacious rooms and living rooms, while spotlights will look ideal in small rooms with low ceilings.

The main style directions when creating the interior of a room and lamps:

1. Oriental themes involve the use of natural wood or solid wood that does not contain minor impurities. Designers try to maintain clear geometric shapes and straight lines, decorating devices with patterns characteristic of Eastern culture.
2. Products in the “country” style look as simple as possible, and sometimes a little rough. But with proper use and choosing the right interior, the lamps look advantageous, increase comfort and create a spirit of unity with nature.
3. Retro. It is possible to produce extravagant lighting fixtures that were used in the old days.
4. Art Nouveau - modern lamps that try to combine wooden and forged elements, including grilles and patterned structures.
5. The chalet involves the use of only natural wood; according to the idea, the products should enhance unity with nature.
6. The classic style can be classified as a secondary branch of retro. The lamps are characterized by smooth lines and graceful shapes. Wood and stained glass are used in the manufacturing process.

Wooden lighting fixtures can not only belong to different styles, but also be made in one form or another. The most popular of them:

1. In recent years, the wheel lamp has been gaining popularity among connoisseurs of antique interiors. It is mounted under the ceiling on beautiful chains or slats using special candles (light bulbs shaped like these products). Light sources are often used in luxurious castles and antique-style restaurants. Provide uniform lighting throughout the entire room.
2. Large beam with candles. To produce it, they take an ordinary solid log, which is suspended from the ceiling on a chain. The device will be an excellent decorative element for living rooms, bedrooms and dining rooms, but in the kitchen and other small rooms the lamp will look too bulky.
3. Hanging chandelier made of boards tied with ropes. Usually made in conjunction with matte shades made in a simple design. It can be supplemented with various decorative elements - everything is limited only by the author’s imagination.
4. A lamp made from tree roots is an unusual option, created using dry tree roots and rope. These lighting devices can be used in conjunction with wooden lining, but it is important to take into account a small nuance: the operation of light sources with a minimum operating temperature is required, since they are in close proximity to the wooden walls of the product.
5. A wooden beam with several pots or lamps. An original solution for a ceiling chandelier.
6. Children's lamps shaped like animals, stars, balls, vehicles, etc.

Types of lamps

The variety of wooden lamps is not limited to the models listed above. The main limiting factor in their creation is the author’s imagination. A few simple and most obvious solutions that can be taken as a basis for the manufacture of these lighting devices:

1. A tall floor lamp can be created from wooden slats. Usually the product is installed in the center of the room or in some prominent place.
2. A wooden body made of thin sheets of pressed veneer, having a non-standard shape.
3. A small wall lamp made from sawn timber.
4. Floor lamp from an old pallet. A simple, but at the same time extraordinary product. To produce it, you can take a glass jar and a sawn pallet.
5. U-shaped lamp made of wooden slats, which can be decorated with a variety of woven materials.
6. Small pieces of wooden pallets can be used to create small table lamps.
7. A wooden box can become a frame for a chandelier, under which several matte shades are hidden.
8. You can take an ordinary piece of wood, treat it with protective materials and build in neon light sources. The result is a wonderful table lamp.
9. Lamps are also made from small stumps, which are usually not processed. The result will be an attractive, romantic option.
10. An old tin can, two small boards. And nothing else is needed to create an extraordinary, simple and functional device!
11. A wooden driftwood can serve as a candlestick for a lamp that imitates a candle.
12. Thin pressed sheets can be used to create a chandelier whose shades resemble flower buds.

DIY designer lamps

We offer you options for making various wooden lamps yourself, from preparing materials to step-by-step instructions.

Preparing the necessary materials

Wooden lamps can be made from a variety of raw materials: parts of wood (rhizomes, stumps, branches, driftwood), processed wood (boards, plywood sheets, veneer), etc. The final choice depends on what idea you decide to bring to life. On the other hand, it is important to properly process and prepare any material for use:

• dry the wood thoroughly;
• impregnate with special substances that increase fire resistance and protection against insects and mold;
• when choosing a material, carefully inspect it and make sure there is no rotting;
• When creating a lampshade, use original sockets and glue the parts together with epoxy resin.

What lamps to use

Wood is a flammable material, which makes it possible to use certain light sources. It is strictly forbidden to use lamps with a filament, since when lit, it emits a huge amount of heat, heating not only the socket, but also the wood.

On a note! Ideally, you need to use LED lamps and strips, most of which emit a “cool” white glow and practically do not heat the frame of the product. Today they are the safest elements from a fire point of view.

Master class: lamps made from boards

To produce such a chandelier, you can take several square bars (up to 100x100 mm). The specific dimensions depend on how large the final product should be. Besides them. a mirror will come in handy. It is recommended to start any work with a sketch of the future chandelier. Be sure to include actual dimensions.

The further process is as follows:

1. Stock up on four bars of the same size.
2. Form a castle on the edge of each one. On one side there should be an empty rectangular cavity, on the other there should be a convex central part that will fit into such a cavity. To do this you will need a jigsaw with a wood saw.
3. Assemble the structure together, be sure to glue the parts together. Apply paint of the desired color over the frame.
4. Working from above, route the cable and install the cartridge on it. Fix the last element on the inside of the frame using special brackets.
5. At the top, install a mirror part that will reflect the rays of light in the desired direction.
6. Build a pendant from a chain.

Master class: lampshades and lamps made of plywood

Plywood is considered one of the most convenient and easy-to-use wood materials, the processing of which does not require any special skills. A plywood lamp can be installed almost anywhere - from the terrace of a country house to different rooms of an apartment.

Take a sheet of plywood in your hands and draw a layout of the future product on it, not just indicating the desired dimensions, but also setting them actually on the sheet. The result should be a volumetric lamp, so you need to make blanks for all four sides.

Step-by-step instruction:

1. Transfer the templates for all sides onto plywood of the desired thickness, indicating the actual dimensions of the future device.
2. Cut out these shapes using a jigsaw. You can use a manual or automatic type tool. If the shape of the lamp is complex, then you cannot do without a laser machine.
3. Sand all edges on the cut using sandpaper.
4. Do the same with the materials that will be used as roofing. Observe the dimensions, do not forget to sand the edges.
5. Then you need to glue all the blanks, making sure that the thin sheets are located tightly to each other and securely fastened. Place the bars to which the walls will be glued.
6. Place the cartridge inside the product and secure it. Be sure to make a hole through which the wire will be routed.
7. Secure the bottom and top parts. All these elements must be glued to the same corner bars.
8. All that remains is to create a suspension or mount for wall mounting.

Master class: lamps and chandeliers made from branches

Branches can be found almost everywhere, so they are rightfully considered the most affordable material for creating unusual wooden lamps. Go to the nearest park or square, collect a few branches and get to work.

Important! Unlike other wooden pieces, branches do not need to be dried. The presence of moisture in them determines flexibility and the ability to create unusual shapes. Over time, they will dry out on their own, allowing the lighting fixture to retain its final shape.

The lampshade can be made in different ways: by weaving or tying thick branches using ropes. Wood can be combined with other materials, including metal frames and forged elements.

Install a socket inside the lampshade or secure the LED strip using soft wire. If you wish, you can paint the wooden frame in the desired color.

Master class: log lamp

When making such a lighting device, you can use a log or driftwood. First you need to dry the lumber and apply a protective coating to prevent insects and mold. Create a blank of the desired shape and dimensions. Make special holes for the cartridge, secure the hangers and place the electrical wiring inside. You can install several shades or lampshades made from glass or tin cans on a log.

If you want to save yourself the hassle, then go to lighting stores and buy ready-made wooden lamps. Now you know their advantages and disadvantages, so it will not be difficult for you to verify the quality of the proposed product and ensure its correct and competent operation. When making your own devices, give free rein to your imagination, but do not forget about simple fire and electrical safety rules.

Using beautiful lamps is one of the simple ways to diversify your interior and make it better. Wooden sconces are a stylish symbol of comfort that will definitely never cease to be relevant and can be used in both classic and modern interiors. It is worth considering what options for natural wood lamps exist and how to use them in the interior.

A little history

A few years ago, crystal lamps were considered a symbol of luxury. Now they are gradually being replaced by wooden sconces. This is a return to the old tradition, when wooden lighting fixtures decorated the homes of the rich and even palaces. Of course, these were very simple products, which are far from those lamps that can be found in modern stores.

The fashion for wooden sconces returned in 2010. Then the designers wanted to draw attention to the disaster that took place in New York, and began to create interesting lamps from branches that resembled driftwood left after a tornado.

This inspired others, and soon the fashion for such sconces returned. Now you can even make a unique lamp yourself by decorating the wood with garlands or LED bulbs. This will make the interior truly unusual and customize everything exactly to you and your preferences.

Advantages and disadvantages

Wall lamps made of wood have both many advantages and a number of disadvantages. Both of them are worth talking about in more detail.

pros

The most important advantage of a lamp made of natural wood is the environmental friendliness of this material. If the wood is minimally processed, it will be completely safe for your health. This means that you can easily mount such a lamp on the wall, even in a nursery. Wood is also good because it saturates the air with resins, which make breathing easier.

Another positive point is that the wood is easy to work with. This means that you can create a variety of lamp shapes, and you can also decorate them with interesting patterns. Products made from natural wood are very stylish and beautiful. The advantages include the strength of a material such as wood. Wood is very durable.

If it is additionally treated with special impregnations, the lamp will turn out to be of even better quality.

Minuses

However, not everything is so simple, and wooden sconces have certain disadvantages. These nuances primarily include insecurity . In a lamp made of natural wood Incandescent lamps must not be used. This can be unsafe: if the contact in the socket of such a lamp burns out, the tree can also catch fire quite quickly.

Wooden products may attract insects. However, here too the problem can be solved - with the help of simple impregnations. There are solutions that can protect wood from pests. It is recommended to give preference to lamps made of coniferous wood.

The last of the minuses is Moisture is very harmful to wood. This material accumulates it extremely quickly, after which the surface of the sconce can become deformed and lose its attractiveness.

To ensure that the lamp you purchase or create lasts for a long time, try to hang such a device only in a room where there is no high humidity.

Such sconces are more suitable for bedrooms and living rooms; you should not hang them in the bathroom or kitchen, where the surface of the wood will constantly be exposed to hot steam.

By the way, it is also worth noting that there are breeds that are less susceptible to moisture. This is, for example, cedar. A cedar wood lamp treated with special solutions will last you longer.

Options

There is a wide variety of wooden sconces that can be selected to decorate different rooms. Here are some interesting ideas that may inspire you.

Classical

If you want a little classy style, look to antiques. A classic wall night light, stylized as antique, looks very interesting in the appropriate interior. This lamp will make the room more comfortable. The main thing when choosing classic sconces made of natural wood is not to overdo it. If you hang several expensive sconces in a room at once with decoration reminiscent of past luxury, then this may be unnecessary.

Modern

Many designers are pleased with their experiments. For example, the Curve brand. This is a company that produces interesting lamps, each of which will perfectly complement the modern or high-tech style.

Geometry

However, it is not at all necessary to experiment with shapes; you can settle on a classic product made in the form of a square or circle. Such wooden sconces look good in minimalist style rooms.

Self made

Handmade lamps deserve special attention. It's always something unique and unusual. At the same time, you don’t always need to know how to work with wood - a stylish lamp can be created even from a simple twig, coated with varnish and special impregnations.

A garland or LEDs will act as a light source here. In both cases, the lamp will not heat up, which means that it will be absolutely safe.

In what interior should I use it?

Almost any house or apartment can be complemented with a stylish lamp made of high-quality wood. The main thing is to skillfully combine different details and organically fit the sconces into the interior. For example, in a modern apartment, a wooden lamp with a forged base will definitely be inappropriate. You need to know how to avoid such mistakes and where to install natural wood sconces.

In the bedroom

Since most people associate wood with a feeling of comfort, a lamp made from this noble material fits perfectly into the interior of any bedroom:

• For a vacation spot for a couple designers usually recommend choosing something simpler and more discreet - for example, square sconces, wooden clouds complemented by LEDs, or simple panels decorated with patterns. An ideal option for the bedroom is a wooden night light, shining with soft colored lights. Dim lighting will help create a pleasant relaxing atmosphere in the room.
• For children's you can choose something special - for example, a wall night light that transmits rays through shaped openings, creating beautiful patterns on the walls, or a lamp made in the shape of an interesting animal or cartoon character. Even an unpainted tree will still look quite cute and unusual.

In the living room

A sconce with elegant carvings along the entire perimeter of the floor lamp will complement a modern living room. You can pay attention to lamps complemented with fabric elements or metal and glass inserts. The latter are best suited for decorating a room in the Art Nouveau style. This option is very suitable for a loft-style apartment.

Overall dimensions of the lamp, mm: 337x559x419 (width x depth x height)

Form the base

The free forms of the base parts provide a good opportunity to practice constructing contours using the method of enlarging on a scale grid, since these parts should first of all look expressive, and the accuracy of the dimensions in this case is not too important.

1. Enlarge all templates to the specified sizes. From 19 mm material, cut two blanks for base A and one bracket B. From 10 mm planks, make two blanks for racks C. Fasten the blanks of the base and racks in pairs with double-sided tape.

2. Using spray adhesive, attach the paper templates to the blanks. Use an awl to mark the center of a 6mm hole on one of the C posts. Then cut the pieces along the outline, leaving a small allowance on the outside, and sand to the line. Save the 19mm scrap to make spacer D shown in fig. 1.

3. Now remove the templates, separate and sand the parts. Planing or sanding Align the edges of the halves of base A that will be glued together. Mill out lamella nests in both edges and glue the base, squeezing the parts with your hands for several minutes until the glue begins to set; then carefully place the glue on a flat surface to dry. Once the glue is completely dry, sand parts A, B and C with 220-grit sandpaper.

Note. When grinding pillars C, maintain the previously marked center of the hole. If necessary, deepen the hole with an awl.

4. Take the scrap saved for spacer D and transfer the contours of the pillars C onto it (photo A). Then mark the height according to the dimensions shown in the figure. 1. File the spacer to its height and sand the top and bottom edges. Apply glue between the lines on both sides of the spacer (photo B) and clamp the part between the posts, aligning it with the marked contour lines.

Note. When gluing the posts, make sure that the intended center of the hole is located on the outside of the glue.

Once the glue has dried, saw off the protruding parts and sand the spacer flush with the edges of the posts.

5. Place a piece of double-sided tape on the bottom edge of the C/D adhesive and attach it to the base A (photo C). Do the same with bracket B, aligning it with the center of the hole in the posts (photo D). Then drill and countersink pilot holes through the base and secure the B/C/D assembly with screws as shown.

6. Drill a 6mm hole through the posts and bracket at the marked point (photo E) and glue a wooden dowel into the hole. When the glue has dried, cut off the protruding ends of the dowel and sand it flush with the surfaces of the C posts.

Remove the screws from the base, separate the bracket with the posts and remove the tape. Then re-attach the assembly to the base with screws, adding a little glue.

Make a wooden lampshade

We made the lampshade using two devices: a circular saw (for a band saw) and a router (described in the “Master's Tip”).

1. Using a compass, mark a center and a circle with a diameter of 158 mm on a 6 mm board. Drill a 3mm hole in the center, cut out a disc and sand the edges. Mill an annular groove on the underside of disk E,.

2. For shell F, saw off a 1 mm thick strip from the edge of the workpiece measuring 25x32x485 mm.

Note. Install a splinter guard on the saw table and cut the strip from the outside to avoid dangerous kickback.

Sand the strip and cut it to final length.

3. Mark the overlap line of the ends of the strip. Then glue the shell F (photos F and G). Once the glue has dried, carefully sand the outside of the piece to make the overlapped edge invisible. Glue the shell to disk E (photo H) and leave to dry.

4. Countersink a hole on the inside of disk E and attach the lampshade with a screw to bracket B. Apply any finishing coating. (We sprayed semi-matte nitro varnish three times from an aerosol can.)

The compact LED light with magnetic base is easy to install and provides easy access for battery replacement. Secure the mounting plate with small button head screws. Then simply insert the batteries and turn on the lamp to make the world a little brighter.

DIY wooden table lamp - drawings

Born pretty, darling ROOM Ð°Ð´Ð¸ÐµÐ½Ñ Ð¾ÐºÑÐ½Ð°Ð½Ð¸Ñ Ð±Ð»ÐµÑк…

Return