In Ideas for the home: how to hide wires
Unfortunately, wireless technologies have not yet become widespread in offices and homes. This means that the pile of annoying wires on the desk won’t go away anytime soon. I'll tell you a few tricks to help you get rid of clutter and hide cables from prying eyes.
1. Hide the extension cord from chargers in a box
*
The extension cord with chargers constantly gets in the way on the table or under your feet, collects a lot of dust, and also looks unaesthetic. Dealing with this problem is very simple: take a nice box, make a few holes in it and hide all the wires and cables there.
2. Secure the wires under the tabletop
***
To secure the wires and extension cord under the table, you will need binders and screws (their length should be at least a quarter less than the thickness of the table top, otherwise they will go right through and the table will be damaged). First of all, attach an extension cord under the tabletop, preferably in the middle of the table or closer to the wall. Then in in the right places secure the binders with screws. Connect everything you need to the extension cord and collect the wires with clamps. Visually the table has become much cleaner and neater.
There is a simpler option if you don't need to hide a large number of wires This will require construction stapler. To prevent the long wire from the lamp from dangling under your feet, carefully secure it with paper clips at the table leg. A small extension can also be secured with paper clips. For thicker wires it is better to use special clamps.
Stapler clips aren't your thing? Regular zip ties will do. Secure the wire to the table leg with zip ties. Wires that run along the floor can be covered with plastic or a board that matches the color of the floor. The extension can be secured under the tabletop using wide Velcro: secure it to the back side countertops, and then attach the extension. To prevent wires from dangling under the table, run them through cable channels - they can be purchased at any hardware store. You can fix the channels themselves with electrical tape or a regular plaster.
*
3. Organize your cable storage
They will help you get rid of tangled wires. proper organization. First, collect cords from phones, players, game consoles, and tablets throughout the house. Then take boxes (preferably prettier ones), place cardboard dividers inside them, label the location for each cable (so you don’t get confused later) and lay everything out neatly. To prevent the wires themselves from getting tangled, use regular cable ties.
***
If you don't want to deal with boxes, buy a basket and save up more toilet paper rolls.
4. Keep all necessary wires at hand
We can’t hide all the cables in a box: we need some of them almost constantly. The solution is simple: secure them to the edge of your desktop so that you can reach out and connect the device to your desktop if needed. the right wire.
Content:IN Everyday life quite often situations arise when the existing sockets in an apartment or private house do not allow the use of any electrical appliances or household appliances. The main reason is their inconvenient location, so owners prefer to use an extension cord. In some cases, increased power outlets or a longer cord are required. In this case, home craftsmen make an extension cord with their own hands. A self-made extension cord will be much cheaper than a branded one and much more reliable. If you have the skills to work with the tool, the entire procedure takes from 15 minutes to half an hour.
Preparing to assemble the extension cord
Before making an extension cord, you first need to decide on its purpose. This will allow you to determine the possibility of connecting certain devices, as well as the maximum permissible power. These factors have a direct impact on the choice of cable cross-section and other components. It is recommended to select all parameters with a small margin, so that in the future there is the possibility of connecting more powerful electrical equipment.
First of all, you need to buy a wire that will be used as a cord. Most the best option considered copper, characterized by increased flexibility. If there is a grounding contact in the socket, the wire must be three-core, but if it is absent, a cable with two cores can be used. When purchasing, you should carefully study the product labeling.
If the brand “PVA 3 x 1.5” is indicated, this means that the wire is three-core and the core cross-section is 1.5 mm. These parameters allow you to connect a load with a power of up to 3.5 kW. For a power of 5 kW, a cross-section of 2.5 mm will be required. The data for calculations can be taken from a special one, which will significantly speed up the solution to the question of how to make an extension cord with your own hands.
When choosing a cross-section, it is necessary to take into account the conductor length factor. For example, if the cable length is more than 100 meters, then during operation there may be a voltage drop due to the connection of devices high power. Therefore, it is recommended to choose a cable with a larger cross-section than that provided in the calculation table.
Then you need to choose the right one, which should be collapsible. It is not recommended to purchase Euro-type products if you plan to use sockets in advance old design. Otherwise, you will additionally need an adapter. On the body of each plug there is a marking indicating the maximum current. For example, at 16A you will need a cable with a cross-section of 1.5 mm, and for 25A the cross-section will be 2.5 mm. If there is a ground connection, the plug must have a grounding pin in its design.
It is not recommended to choose a single outlet. The socket block should be at least double, and preferably with three or four elements. When choosing, you need to be very careful so as not to accidentally buy an overhead structure intended for use with open wiring. It is missing special clamp, which protects against accidental pulling out, and over time, the back cover of such sockets falls out. For extension cords, there are separate options in the form of socket strips or cable sockets. If you need to connect a computer or other office equipment, then in this case it is made network filter, which has a push-button switch and light indication.
After all the materials are prepared, you can begin assembling the extension cord. This procedure is carried out using a knife, screwdriver and pliers.
How to assemble an electrical extension cord with your own hands
At the first stage, the top insulating layer is removed from both sides of the cable by approximately 5-7 cm, after which the ends of each core are stripped to 1 cm. Next, the plug is disassembled by unscrewing the fastening bolt. After this, you need to loosen the screws on the clamp that secures the cable inside the plug body. Then the stripped wires are connected to the two plug contacts.
The location of the conductors does not matter; the most important thing is to correctly connect the grounding contacts on sockets and plugs. After connecting the conductors, the plug is reassembled.
At the final stage, the socket block is disassembled and two conductor cores are connected to the contacts. The third wire is connected to the ground pin, exactly the same as on the plug. Thus, both ground contacts are connected by a single wire.
If the core consists of many wires, then it is recommended to solder it or. As a last resort, you can simply twist the wires using pliers. After all connections, the cable is fixed inside the housing and final assembly block. The finished extension cord is checked by plugging it into a household outlet. electrical network or using a multimeter.
How to properly use a homemade extension cord
Using homemade extension cord Several mandatory requirements must be met.
- There should not be any damage on the cable, and if it does appear, it must be insulated. Isolation is performed when the extension cord is unplugged from the outlet.
- If a plug or socket fails, it must be replaced. They should be protected from moisture and avoid excessive overloads.
- When operating on maximum loads The cable must be unwound completely to avoid overheating.
A home router is an indispensable thing these days. Its main function is to distribute an Internet signal, which allows devices to connect to the network wirelessly, knowing only its name and password.
When you bought a router, it is important to choose a place where to install it. If you only need to connect a desktop computer to the Internet, then the router can be installed next to it. And if you want to use the Internet from other rooms, then it is better to choose a place somewhere in the center of the apartment, for even distribution of the signal.
The best place you can think of to install a router is a wall. Having chosen a location, first test the signal level in each room, and if it suits you, you can begin installing the equipment on the wall.
How to easily attach a router to the wall?
1. Prepare your tools: adhesive tape, a pencil and, of course, our router.
2. Place a strip of tape on the back of the router.
3. Routers usually have mounting holes on the back cover. Make “holes” in the tape at their level.
4. Peel the tape off the router and stick it on the wall at the level where you want to mount the router.
5. Screw screws into the holes in the tape.
6. Remove the strip of tape.
7. Now secure the router to the screws installed in the wall.
The extension cord with chargers constantly gets in the way on the table or under your feet, collects a lot of dust, and also looks unaesthetic. Dealing with this problem is very simple: take a nice box, make a few holes in it and hide all the wires and cables there.
There are also ready-made solutions, such as Plug Hub from Quirky. This is a box made of hard plastic with a rubberized bottom. There are three holes on top for cables, and inside there are three fasteners that can be used to wrap cords that are too long. The Plug Hub can be placed on the floor or mounted on the wall.
amazon.com 2. Secure the wires under the tabletop
To secure the wires and extension cord under the table, you will need binders and screws (their length should be at least a quarter less than the thickness of the table top, otherwise they will go right through and the table will be damaged). First of all, attach an extension cord under the tabletop, preferably in the middle of the table or closer to the wall. Then secure the binders in the required places using screws. Connect everything you need to the extension cord and collect the wires with clamps. Visually the table has become much cleaner and neater.
There is a simpler option if you don’t need to hide a large number of wires. To do this you will need a construction stapler. To prevent the long wire from the lamp from dangling under your feet, carefully secure it with paper clips at the table leg. A small extension can also be secured with paper clips. For thicker wires, it is better to use special clamps (for example, these).
Stapler clips aren't your thing? Regular zip ties will do. Secure the wire to the table leg with zip ties. Wires that run along the floor can be covered with plastic or a board that matches the color of the floor. The extension can be secured under the tabletop using wide Velcro: secure it to the back of the tabletop with screws, and then attach the extension. To prevent the wires from dangling under the table, run them through cable channels - they can be purchased at any hardware store. You can fix the channels themselves with electrical tape or a regular plaster.
3. Organize your cable storage
Organizing them correctly will help you get rid of tangled wires. First, collect cords from phones, players, game consoles, and tablets throughout the house. Then take boxes (preferably prettier ones), place cardboard dividers inside them, label the location for each cable (so you don’t get confused later) and lay everything out neatly. To prevent the wires themselves from getting tangled, use regular cable ties.
If you don't want to deal with boxes, buy a basket and save up more toilet paper rolls.
If the wires don't bother you, you can simply attach a label to each one to make it easier to distinguish between them. For example, like this:
4. Keep all necessary wires at hand
We can’t hide all the cables in a box: we need some of them almost constantly. The solution is simple: secure them to the edge of your desktop so that if necessary, you can reach out and connect the device to the desired wire. Sugru will help us with this - plasticine-rubber and one of the most irreplaceable things in the household. Don't believe me? Then take a look.
Roll Sugru into small balls and secure them to a table support. Then stationery knife remove some plasticine (carefully, try not to deform the balls too much). Life hack: to prevent the plasticine from sticking to the blade, first rinse it with soapy water. Then adjust the shape a little with a sushi stick or toothpick to create neat hollows (they should be slightly wider than your wires). Everything is ready, you can fix the cables.
There is an option for those who know how to work with wood. A small block with holes will help organize all the wires on your desktop.
The simplest solution is to pass the wires through binders attached to the tabletop.
hexjam.com 5. Don't hide wires
Seriously, if you get creative, cables can become interesting element decor.
You are here now - home page - All about repairs:
When you are going to hang something on the wall, this is not a question at all!
You will need a hammer drill or impact drill. A couple of dowels. Level, hammer, tape measure.
If it is a shelf or a cabinet, then place it in that place and approximately mark the level of the hole. Well, then it’s quite simple, we measure the distance between the holes on the shelf or cabinet.
We mark the first hole, take a level and draw it, take a tape measure and set the distance. The intersection of the level line and the distance on the tape measure will be your second hole!
If there are several shelves or cabinets, then we do this:
We start either from the extreme right point or the extreme left point, drill, hammer in a dowel, tie a thread, and level it. In the place where a person holds the thread, it needs to be secured somehow. You can drill and attach it to a dowel only if the hole from the rough dowel is either hidden by a shelf or a cabinet.
An ordinary dowel 6 x 40 will withstand a minimum of 50 kg per cut, in concrete wall. I think that you won’t have more than 100 kg in one closet!
Why is all this, how to hang a shelf, or how to hang a closet, such a simple operation that it’s even somehow boring!
But here's what I wanted to tell you about.
How to hang it accurately the first time?
How to hang something whose holes are not directly accessible!?
Imagine a situation where you measured, hammered a nail, and didn’t hit the right size for various reasons, but it’s impossible to drill next to it!?
Has such a situation ever occurred!?
Since I worked a lot both in construction and as a carpenter and joiner, I had to see a lot!
And often this very situation turned out to be practically unsolvable the first time!
But there is a way that is ingenious, like all the simplest things! And I remembered this method when the need arose to hang an extension cord!
Hang your computer extension cord on the back of your desk the first time and exactly where you need it! The top tabletop extends slightly beyond the backsplash, which is why we have a stopper!
We need to make a template.
1. Select self-tapping screws so that they fit freely into the hanger hole.
2.B in this case I had some thin cardboard lying around.
ATTACHING THE EXTENSION
It is more convenient than a simple sheet, because the screws will hold better there.
3.Insert the screws and move them to the extreme point of the hanger,
4. Take the cardboard and, aligning it along one of the sides, press on the cardboard so that the screws appear on our side.
5. We take out the cardboard with self-tapping screws and place it in the place where our object should be located, in this case the extension cord.
6. We wrap the screws, tear out the cardboard, and adjust the screws to the height.
7. Attach the extension.
This is what we got, quickly, simply, accurately and right the first time! The story turned out to be 10 times longer than the process itself!!!
How to hang up a router.
Using absolutely the same technology, we will attach the router in the place where it is needed on the back panel, or on the wall, but the first time.
In this case, ordinary paper was used as a template!
Here is our router hanging on the back of the table! Very simply cheap and cheerful!
Before installing electrical wiring in new apartment or before replacing the wiring during a major overhaul, any owner is faced with a choice of how many and what kind of sockets he needs to install in each room. IN modern apartments sockets are rarely installed one at a time; usually two, three, and in some cases even four electrical sockets are placed side by side. For example, at a workplace with a computer it is better to install 3-4 sockets, otherwise you will not be able to do without an extension cord.
Practice shows that there are never too many sockets. If we need to install two sockets side by side, then we have a choice - install two single electrical sockets in a two-post frame or one double electrical socket. The Florence series features double sockets and multi-post frames, so both options can be implemented. What to choose?
- Double sockets are designed to Instead of one old socket, one double socket could be installed into the existing socket box.
Ideas for the home: how to hide wires
This allows you to double the number of sockets when renovating an apartment. This is why double sockets were developed.
- The price of a double socket is less, than the price of two single sockets in a double-post frame, let’s see this using the example of white or beige sockets from the Florence series.
1. Price calculation for two single sockets in a two-post frame
2. Price calculation for Alternative option– for double socket
You can install the wiring so that powerful electrical appliances are connected to each single socket, i.e. so that a current of up to 16 A flows through each. But for this, it is necessary that the sockets are either powered through two separate lines with cables of a standard cross-section for connecting sockets (2.5 mm2), or powered in series through a cable of a larger cross-section. As a result, it is possible to ensure that the total maximum current, which can flow through two single electrical outlets would be 32A. This cannot be done by installing a double electrical outlet.
To summarize, we can say that double sockets are indispensable if we are faced with the task of increasing the number of sockets in pre-installed socket boxes. This is mainly relevant when replacing sockets in the process cosmetic repairs, if the wiring is not replaced with the installation of new socket boxes. Single sockets under a multi-post frame look more aesthetically pleasing than double sockets and give greater freedom of choice. This option is suitable for overhaul apartments with replacement of wiring or for furnishing an apartment without finishing in a new building.