Why you should contact us:
Workshop No. 1 arose on the basis of a large online store of lamps.
For the convenience of our customers, we provide warranty and post-warranty service.
This significantly speeded up the process of warranty repair of lamps and our customers liked it.
Over time, we decided to provide these services not only to our customers, but also to all other customers who experienced lamp failures. Thanks to our experience, knowledge, contacts with the largest lighting manufacturers, we have the opportunity to use original components in the work of our workshop!
We have transparent pricing and we provide a 1-year warranty on all work performed!
We work for residents of Moscow and the Moscow region: Chekhov, Serpukhov, Podolsk, Krasnogorsk and other cities.
Call us and we will pick up the lamp for repairs if necessary!
We will answer all your questions, we have polite and competent staff!
Repairing a lamp will be cheaper than buying a new one, so let's try to save you money and time, and return the lamp that is so dear to you! Contact Workshop No. 1, where you can repair a chandelier quickly, efficiently and inexpensively! And if you decide to replace the lamp, we will select from our huge catalog exactly the one that you will like!
Lamps often come to us after attempts at repair by “craftsmen visiting your home.”
We offer the most flexible conditions so that you feel comfortable, easy and bright with us!
We are working to bring light back to your home!
The repair time depends on many factors (the nature of the breakdown, workload of the service department, availability of components, etc.) and is agreed upon in each case separately. As a rule, repairs take 1-2 days. If you need urgent repairs on the day you call, then you can use the “Urgent Repair” service!
We are interested in the shortest possible delivery time for services!
In our work we use only high-quality components and original spare parts from local manufacturers of chandeliers and lamps.
It is very important for us to do our work efficiently so that you are satisfied!
Contact us and see for yourself!
Prices for repair services for chandeliers and lamps
| № | Name of works | Unit of account | price, rub. |
| 1 | Diagnostics. The cost of diagnostics is paid when the lamp is returned for repair, regardless of the nature and type of work, and is non-refundable! When a diagnostic technician comes to your home, there is no charge for diagnostics! |
PC. | 300 |
| 2 | Replacing the chandelier control panel (cost of labor) | PC. | 300 |
| 3 | Remote control for lamps (the cost depends on the power of the remote control, modes, number of channels, brand, etc. The exact cost of remote controls can be found on the website) | PC. | from 500 |
| 4 | Repair of the remote control controller (labor cost) | PC. | 500 |
| 5 | Repair of driver (power supply) for LED lamps, chandeliers, table lamps, track systems, etc. Repair of the control gear unit of metal halide track lamps. The cost of work depends on the power of the driver, ballast and its availability in the housing |
PC. | from 500 |
| 6 | Replacing burnt-out LEDs in a chandelier, in chandelier lighting, in track lamps. The cost of work depends on the power of the LEDs |
PC. | from 300 |
| 7 | Light-emitting diode. Depends on the manufacturer, power, light spectrum, etc. | PC. | from 100 |
| 8 | Repair of the touch switch of a table lamp, floor lamp. Repair of floor lamp and table lamp dimmer. Repair and replacement of switches on the body of floor lamps. The cost depends on the characteristics and functionality of the component |
PC. | from 500 |
| 9 | Replacing the power cord of a table lamp, floor lamp, sconce, etc. (cost of labor) | PC. | 200 |
| 10 | Drilling a hole for a switch for wall sconces. The cost differs depending on the configuration and base material of the sconce |
PC. | from 250 |
| 11 | Installation or replacement of a switch (cost of work) | PC. | 150 |
| 12 | Switch for sconces. The cost depends on the type of switch (pull cord or button) and its power |
PC. | from 150 |
| 13 | Manufacturing of metal structures and parts to replace those that have failed and cannot be restored. The cost is calculated individually depending on the shape and design of the part. |
product | from 1 000 |
| 14 | Soldering, welding, restoration of the body and metal parts of the lamp | product | from 500 |
| 15 | Ordering damaged shades and lampshades for lamps from the following manufacturers: Citilux, Lussole, Omnilux, Odeon, Reccagni Angelo, Sonex | lampshade/shade | from 400 |
| 16 | Cleaning, washing, painting the lamp | product | from 300 |
| 17 | Replacement of sockets E14, E27, G4, G9, R7S in chandeliers, sconces, table lamps, floor lamps and other lamps (cost of work). | PC. | from 300 |
| 18 | Lamp socket. The cost depends on the base, power, material and country of production |
PC. | from 100 |
| 19 | Painting the cartridge in the color of the body. | PC. | 150 |
| 20 | Replacement of electronic transformers for halogen lamps (cost of work) | PC. | 350 |
| 21 | PC. | from 350 | |
| 22 | Replacement of electrical wiring in a chandelier, floor lamp, sconce and other lamps. Depends on the complexity of the horn configuration |
horn | from 300 |
| 23 | Urgent diagnostics (on the day of treatment) | product | 500 |
| 24 | Urgent repairs (same day). Services for work are calculated according to the prices from the current table with a 30% surcharge. Prices for components do not change. | product | +30% |
| 25 | Visit of a receptionist to receive the lamp for repair. The cost of traveling more than 7 km outside the Moscow Ring Road is paid additionally 20 rubles/km. Home visit services are paid for when the product is transferred for repair |
departure within a radius of 7 km. from MKAD | 500 |
| 26 | Return visit with a repaired lamp. The cost of courier travel over 7 km outside the Moscow Ring Road is paid additionally 20 rubles/km. You can pick up the repaired lamp yourself from our workshop |
within a radius of 7 km. from MKAD | 300 |
The main reasons for the breakdown of chandeliers and lamps are natural wear and tear of components and components, as well as voltage surges in the network. In addition, lamps with higher power than recommended are installed in the lamps, which leads to melting and failure of the sockets, wiring and switch. Almost all lamps can be repaired. Every day we repair ceiling chandeliers, sconces, crystal chandeliers, repair floor lamp bases, restore dimmers, table lamps with touch switches and other lamps.
Our workshop has all the necessary equipment for diagnosing and repairing lamps of various levels of complexity. Our specialists will promptly replace cartridges, cords, diodes, switches and other faulty parts. Qualified help costs much less than a new chandelier!
Workshop No. 1 also offers a range of services for the repair and restoration of lamps and chandeliers for commercial organizations: offices, shopping centers, banks, concert and banquet halls, hotels, etc. We work by bank transfer, we provide an agreement. We offer long-term maintenance of objects.
The most frequently asked questions in cases where the lamp suddenly fails
Where can I repair a chandelier?
This question probably arises for anyone who has encountered an unexpected breakdown of a chandelier or lamp. If you are unable to repair the lamp yourself, on your own, then you will most likely think about calling a specialist to your home or contacting a trusted workshop to repair the chandelier. The most important thing here is not to rush. Carefully study the reviews, compare prices, listen to what they promise you? Our main difference from other repair organizations is that our workshop was created on the basis of a lighting store and we have more than 15 years of experience in working with lamps. We have transparent pricing and a guarantee for all work performed, since our work is performed not by third-party craftsmen, but by in-house technical specialists. It is also important for many clients that they help remove a faulty chandelier from the ceiling or disassemble a floor lamp, and after repair, put it back together and hang it. We provide a full range of services for the repair and installation of lamps. Whenever a question arises about where to repair a chandelier, you can always contact us. Workshop No. 1 will always help with the repair and installation of any lamps - electric, household, apartment, country, pendant, ceiling, etc.
Unforeseen breakdowns
Not only chandeliers and lamps that you have used for a long time can fail, but also those purchased more recently. If you bought a chandelier or any other lamp in the My Light online store, during the factory warranty we will provide assistance with repairs absolutely free of charge!
Every time a breakdown occurs unexpectedly, but you can always find a way out! Today there is enough material on the Internet on how to repair a lamp yourself. Therefore, if you are confident in your abilities, you can fix the breakdown at home. But if you don’t want to take risks and want to entrust this to a competent specialist, then our craftsmen will be happy to help you repair a chandelier or lamp. They don’t contact us twice with the same breakdown, because we do our work efficiently and test the lamp in the workshop after repair. You can be sure that when you pick up the lamp, it will not break the next day. And for all other cases, there is an official workshop guarantee!
Best wishes, Workshop No. 1 (Service Center “My Light”)
It’s not uncommon to change an energy-saving or regular incandescent light bulb in a lamp (chandelier), but the new one doesn’t light up! You need to immediately ring it or check it in a lamp that is well known to work. If it does not light there either, it is necessary to repair the socket or, less often, check the integrity and connection of the wires or cables in the lamp or the electrical wiring!
Before starting work, you must take
Remember, a lamp, especially an incandescent one, heats up to high temperatures! To avoid burns, always wait until it cools down! You should never screw in lamps with a power greater than that indicated in the passport for the lamp or on its socket - this threatens its breakdown and even fire!
Repairing LED and fluorescent lamps has its own characteristics, so we recommend reading our relevant instructions dedicated to this.
Do-it-yourself repair of a ceiling lamp or chandelier:
Repair instructions for a table lamp.
When repairing a table lamp, we check the integrity of the electrical circuit and socket contacts - everything is as described above, but there are also some peculiarities:
Personally, I check the table lamp as follows:— I plug it into the socket, then the switch, and carefully measure with a multimeter the presence of 220 Volts at the contacts of the socket. Just be careful not to short circuit.
Note: Energy-saving lamps can be supplied with reduced and constant voltage - take this into account when checking.
This situation is probably familiar to many: table lamp broke, we’ve already changed the light bulb and plugged it into a different socket - nothing helps.
It's 90% that the cause of the breakdown is burnt wires near the socket. This happens due to the fact that a light bulb of a larger, uncalculated power is often inserted.
Important:
If this is your case, be careful not to touch metal parts, they may be live due to the fact that the burnt wire could touch the lampshade.
The whole process will take you no more than an hour, provided that you already have all the supplies you need. At the same time, a cheap similar table lamp costs on average 300-500 rubles. Therefore, think again about whether you should repair it.
Well, if you still decide to repair, read on carefully.
What you need to repair a table lamp
Note:
The average price on the market at the time of writing is indicated for the materials. Everything you need can be bought at any electrical goods store.
Materials:
- two-core cable about 0.5 m long, with a cross-section of at least 2.5 m?. A meter of good two-core cable costs no more than 50 rubles.
- ceramic cartridge – 10 rub.
- electrical tape - 10 rub.
- heat-resistant insulation – 10 rub.
Tool:
- screwdrivers
- pliers (with wire cutters)
How I repaired my table lamp
I have this cute example of a Chinese green table lamp, independently decorated with little animals. 🙂
The first thing you need to do is get to the cartridge. Unscrew the lampshade fastening.
And we take out the cartridge.
As you can see, the wires were burned and torn due to strong heating, the insulation became rigid and burst.
If you have disassembled the lamp and the wires are intact, then the reason is most likely in the switch; use a multimeter or a “test screwdriver” to check the presence of voltage in the circuit before and after the switch. If there is no voltage after the switch, but there is before it, then it needs to be replaced. You can easily buy a similar switch at any electrical goods store. If there is no voltage even before the switch, then only the plug and the supply wire remain. If the plug is detachable, you can check for a broken wire. If not, we change everything along with the cable.
Important:
Before disconnecting the wires, remember or write down which wires will need to be connected in the future. There are not many wires there, the circuit is simple, I think there will be no problems.
Unfortunately, my socket was without wire clamps. To avoid soldering, I decided to replace the cartridge. The existing wires will also no longer work, so we replace them with our own, preferably with thicker insulation. Just don’t overdo it, thick wires may not fit into the metal corrugated rod. In general, before connecting them to the cartridge, I recommend checking this. The wires at the point of connection to the cartridge must be covered with thermal insulation to avoid severe overheating.
Important:
Very carefully, with little force, tighten the bolts on the chuck. Tighten it a little and the terminal will burst! Naturally, the wire will dangle and burn again. You can even buy a spare cartridge just in case, since the terminals are very weak. I didn’t find any other cartridges in my city, maybe things are better with you.
To make it easier for the wires to fit into the corrugation, wrap the ends with electrical tape.
Since the load of the light bulb is not very large (on the lampshade it is written: “maximum 60W”), you can simply twist the wires together, wrapping them well with electrical tape.
If you have a soldering iron, you can solder it, it won’t hurt, or buy special connecting terminals. As an alternative, you can use an excellent homemade wire connection using copper tubing. Don't forget to wrap the wire connections properly with electrical tape.
Put the wires in place.
Make sure, if possible, that the wires do not lean against the socket inside the lampshade.
Well that's it, ours desk lamp working again!
Do not use bulbs larger than 60W, otherwise the wires will burn out again. This is a table lamp, not a spotlight! Well, if a 60W light bulb is not bright enough, in this case, use a gas-filled one (by the way, they say these lamps are harmful and emit toxic gas) or, better yet, an LED lamp. Such lamps heat up less, so you can safely use any brightness, they will not damage the wires, and you can also save energy.
Bright light, friends! 🙂
LED lamps today are considered the most economical and durable compared to others. And although their cost is still relatively high, they are increasingly replacing incandescent and fluorescent lamps.
Why is this happening?
Mainly for two reasons:
1. incandescent lamps burn out quickly and have low efficiency,
2. Luminescent ones require special disposal as they contain mercury vapor in the flask. In addition, if you break such a lamp at home, you can expose your family to poison.
There are no such problems with LEDs. Throw them anywhere and break them to your health, they do not pose any danger - except for glass fragments.
At the same time, there are a lot of companies producing these products, and choosing a quality product among them is sometimes not an easy task.
Yes, and a famous brand does not guarantee complete confidence in the long-term uninterrupted operation of the device.
What should you do if the lamp stops shining and you can’t replace it under warranty? You can try to repair it yourself. Its structure is not complicated and does not require special tools for disassembly.
This article will describe the disassembly and repair of a standard, budget-class LED lamp. In addition, one of the possible breakdowns and its elimination is given.
The only tools you need are a screwdriver, a knife and possibly a two-handed indicator.
If there is no indicator, any “dialing” will do.
So, let's start by removing the diffuser. To do this, insert the knife blade into the gap between the glass and the plastic case and carefully move it in different directions.
The diffuser should come out of the latches and be removed without any problems.
A board with LEDs and a rectifier reveals itself.
There is also a fuse installed on the board. To make sure that it is not burnt out, we connect the ends of the continuity wire to its terminals. Light or sound indication of the device will show its serviceability. If it doesn't show up, you'll have to replace it.
When the fuse is intact, we disassemble further.
First, unscrew the two screws securing the board, after which it can be easily removed.
Under the board there is a radiator in the form of a metal flask.
Thermal paste applied to both surfaces improves the heat transfer of the board to the radiator.
If necessary, it can be changed if it has dried out. Regular thermal paste for a computer processor will do.
To continue disassembly, pull on the top of the lamp housing and it can be easily removed.
At the bottom of the case with the cartridge, you can see two metal strips, one end connected to the base, and the other with holes where the screws go.
Thus, voltage is transmitted through the screw from the base to the board.
The problem turned out to be that over time the contact became bent and did not come into contact with the board screw. Hence the lack of light from the lamp.
To eliminate this malfunction, simply bend the end of the contact strip with a screwdriver or tweezers.
Of course, you can do it better, for example, by soldering wires to the board and base. Then there will definitely be no problems with contact. But more often than not, the first simple option is sufficient.
Now you can assemble the lamp in reverse order. We put on the upper part with the radiator so that the two contacts fit into the holes.
Next, install the board and tighten it.
Repair of table lamps should begin with diagnostics. Malfunctions can be divided into several types:
1. The lamp works, but is unstable - the lamp flickers.
There may be several reasons:
Network operation is unstable, there is not enough voltage.
You can determine this by plugging the table lamp into a known-good network, or connecting it to the network using a voltage stabilizer.
2.During operation, if the cable is touched, the light turns off:
Mechanical damage to the wire.
We check the wire for internal kinks or external abrasions. If this is the reason, you need to replace the wire.
Switch fault
The lamp turns on every once in a while, and when you press the switch, a clicking sound occurs. It is necessary to make repairs (if the switch is disassembled), or replace the switch
3.When the table lamp is plugged in, the light bulb does not light up.
The cause of the malfunction can be either a burnt-out light bulb or a malfunction of the components of the lamp itself.
Important: before starting repairs, disconnect the lighting device from the electrical network!
How to repair a table lamp - we will describe the process in more detail.
1. Let's check the serviceability of the light bulb itself. If the lamp before starting work
worked, you need to wait until the light bulb cools down. Otherwise, when you try to unscrew the socket, you can damage the lamp, and then you will have to unscrew its base using pliers. Let's check the light bulb visually. If the filament has a break, then the repair is complete - install a new light bulb and turn on the lamp. If it is impossible to visually check the serviceability of the light bulb (frosted glass), then you can check it by screwing it into another lighting fixture.
2. If the light bulb is working properly, then the fault may be caused by the socket. Most often, this is a lack of contact with the light bulb due to the contact being too bent. The malfunction can be easily eliminated by bending the cartridge contact using pliers and a screwdriver.
3.If the repair of household table lamps involves replacing the cord, then the new cord must have the same cross-section as the old cord. The new cord is installed in the lamp after thoroughly cleaning its ends (preferably with a soldering iron to avoid mechanical damage to the wires). We make rings on the wires from the plug side and also process them with a soldering iron. Install the plug. This operation can be avoided by purchasing a wire with a ready-made molded plastic plug.
4.Repair of table lamps may include replacement or repair of the switch.
If preliminary diagnostics indicated this particular malfunction, then the switch can be completely replaced with a new one or repaired. Installation of a new switch is carried out by dividing the supply wire into two wires, on one of which a break is made, and the stripped ends of the wire are connected to the switch contacts.
What is a table lamp for and what does it consist of?
How to choose a table lamp
DIY table lamp
In our store you can purchase various table lamps: 
