DIY garden wheelbarrow. How to make a garden wheelbarrow with your own hands - garden cart Do-it-yourself aluminum tool cart drawings

A trolley is a necessary attribute of any household. Made with your own hands, it costs less than a purchased analogue.

Another advantage of a homemade cart is that it is made strictly according to the needs and meets the required needs.

Having studied different creation technologies, it won’t be much of a problem to make a multifunctional cart yourself.

What types of carts are there?

Metal and wood are the main materials used in the manufacture of carts, as they have the necessary strength characteristics.

Carts differ from each other in the number of wheels and dimensions. You can make it yourself:

one-wheeled cart;
two-wheeled cart;
a trolley in the form of a platform on four wheels;
folding cart.

How to make a two-wheeled cart with your own hands

Making your own wooden cart with two wheels is not at all difficult. For woodworking you will need standard tools. But the strength, capacity and operational characteristics of a wooden cart are in many ways worse than those of a metal analogue equipped with a large number of wheels.

Manufacturing instructions:

To create a frame, we take a board measuring 7x7 cm. We connect all parts of the frame with screws and strengthen it with additional parts;
We screw a couple of rails for bearings to the bottom of the structure;
We make the trolley handle metal. This will increase resistance to stress. An old bicycle handlebar or a thick steel rod will serve as a handle;
We install board sides. Their size affects the capacity. The product is made reliable by its robust frame and firmly attached wheels.

If you have a moped axle lying around, you can use it instead of boards with bearings.

Making a transport cart on four wheels

Four wheels increase the capacity, strength and service life of the cart.

Four-wheeled products are made exclusively from metal. They can withstand weight up to 100 kg. To assemble them you will need a mechanic's tool kit.

The production of four-wheeled carts includes the following steps:

We carry out all the necessary calculations of the loading platform;
We make a container in which the cargo will be transported. The size of the frame will depend on its parameters.;
We install the frame structure using welding. You can use leftover pipes for the frame. We weld the handle to the frame;
We weld to the bottom of the wheel structure;
We “shoe” the wheels with pneumatic tires. This will increase the weight of the cargo the trolley is designed to transport to 80 kg.

We make a folding trolley

Such a wheelbarrow can withstand at least 50 kg of cargo. Its main advantage is its compact size.

To make a folding cart, you must follow the following procedure:

Prepare pipe scraps with a thickness of at least 2 mm;
Draw a frame structure template on a scale of 1:1;
Weld the hinge bushings to the platform frame, and then to the main structure;
Clean and polish all seams.

Making a cart with one wheel

The best option is to use wood to make a one-wheeled cart.

Then we fasten the frame structure to the cargo area with screws. The cart is ready!

If you plan to transport heavy objects, then a metal one-wheeled cart is suitable for you. In addition to standard tools, you will need machines for welding and cutting metals.

First of all, we make a cargo container. It is advisable to use steel sheets with a thickness of at least 2 mm. Next, we weld the handles and the running structure to the platform.

Note!

Bicycle, moped or motorcycle wheels are perfect. The cargo area can be made from a metal barrel.

Anyone can make a cart with their own hands. You just need to familiarize yourself with the rules of creation and safety precautions. They and drawings of various carts can be found on the World Wide Web. Good luck in your endeavors!

DIY cart photo

Note!

How to make a garden wheelbarrow with your own hands? In this article we are going to get acquainted with several rather unexpected ideas and find out what materials and technical solutions can be used in our design.

Wheelbarrow "Diogenes". Made from an old barrel.

Buy or make

Dear reader, let's start with a question that may seem rhetorical. Is it worth planting a vegetable garden? Isn't it easier to purchase a ready-made solution?

Just for your reference, here is a brief excerpt from the price lists of several online stores offering their products in Russia. Retail prices in construction stores are, of course, higher, but not by an order of magnitude.

Obviously, a homemade car can only be cheaper if you don’t have to buy any materials or components. In all other cases, the work of producing it yourself will simply not be economically feasible.

For reference: the retail cost of one wheel for a wheelbarrow in the same online stores varies from 300 to 4800 rubles.

Lux pneumatic wheel with a diameter of 400 mm with a polyurethane tire. Cost - 4799 rubles.

However, let’s not forget about the joy of creativity.
Often people take on the production of something not out of necessity, but simply for the pleasure of trying their hand at a previously foreign field.

Ideas

Dear reader, has your enthusiasm faded? Well, then let's move on to studying other people's experience.

Frames and bodies

The body is galvanized, cut into place, attached to the frame with metal self-tapping screws and press washers.

The result is in front of you.

The body is an old galvanized trough for preparing the solution.
The frame is two arches curved on a pipe bender. They used 3/4 inch (20 mm) water pipe. At the point where the arcs connect, they are welded to each other.
The wheel axle is also held on by tacks. The trough is completely in a state of unstable equilibrium and is fixed with wire, which makes it possible not to lift it from the ground after the soil has been dumped.

Not the height of aesthetics; however, this product is fully functional.

Please note a few interesting points.

The edges of the body are carefully processed and give the impression of being cut not with an angle grinder, but with guillotine shears.
The seams are not held on by tacks, but are lovingly welded along their entire length.
Finally, the owner took the time to paint his creation; Moreover, the choice of colors, mind you, implies incredibly careful use of the tool.

Here the creator did not strive so hard for perfection: the bends were made by simply heating the pipe with a burner; The seams are processed much less carefully. However, the functionality did not suffer at all from this.

If you wish, it’s easy to find drawings of a do-it-yourself garden wheelbarrow on the Internet, made entirely of wood. Only the self-tapping screws, the axle and the linings for attaching it to the frame are made of steel.

By the way: when assembling it is better to use galvanized screws.
In addition, before screwing them in, do not be lazy to drill a hole with a smaller diameter.
The instructions are due to the fact that drilling greatly reduces the risk of splitting the board or timber.

This is another simple idea for creating a car body. Instead of hammering together a plank bottom, a box made from a board is upholstered with galvanization; All that remains is to screw a couple of bars on the sides to the finished body and connect them with an axle with one or two wheels.

Wheels

What can be used instead of purchased wheels for garden wheelbarrows, which are intimidating due to their price?

Wheels from an old baby stroller. Better - from a Soviet-style stroller with steel spokes. The author has a strong suspicion that these products had some alternative military use: their strength seems to allow them to successfully replace the tracks of a light tank.

Wheels from a bicycle - adult or children's. Of course, the large diameter will force them to be used only in pairs, with side mounting.

How to secure wheels to an axle? How to secure the axle itself without welding?

A garden wheelbarrow is a very useful thing, because a summer resident is constantly at work. It is necessary to move fertilizers, planting materials, building materials, soil, and garbage. Moderate physical activity is, of course, beneficial, but this does not apply to heavy lifting. Having a garden wheelbarrow will make your summer life much easier and save you energy. How to make a garden wheelbarrow with your own hands is described in this article.

Many people think that a cart and a wheelbarrow are the same thing. In general, they are right somewhere, but there is still a difference between them:

A cart with one wheel is usually called a wheelbarrow. It is maneuverable and reliable, and its track is much narrower than that of its relative. With its help, you can transport fertilizer and mulch along narrow paths between beds in the garden and in the garden. Unloading it is easy - I pressed the 2 longitudinal handles, tilted it to the side, everything was already in the right place. What’s not really good about it is that you need to make an effort to maintain balance. If you load it heavily, then considerable strength is required. In addition, if you drive on sand or soft ground, then the only wheel that bears the entire load sinks greatly, and this makes movement difficult.

2. Actually, a cart is something more solid, because it can have from 2 to 4 wheels. The paths for its movement need to be wide. But she is stable. The design of the handle is longitudinal or transverse. Heavier materials are loaded onto it. It can withstand heavy loads well, you just need to make sure that the center of gravity does not shift.

If you decide to have this household equipment in your yard, then you should know that there are construction and garden wheelbarrows. Their designs are not fundamentally different, except that the first ones are more powerful.

DIY one-wheeled garden cart made of metal

Let's start working on creating a garden cart with a sketch:

Let’s designate the dimensions, indicate all the necessary dimensions, then it will be easier to select the material;
The primary element in a metal cart is the container. Based on its size, a frame and wheel are selected.

A one-wheeled garden wheelbarrow consists of the following parts:

2 levers - 1;
2 handles - 2;
3 ribs. In the sketch above they are numbered 3;
bases - 4.5;
2 overlays - 6;
2 racks - 7;
2 strips - 8;
stop - 10;
transverse ribs - 9, 11;
supports - 12;
trough - 13;
wheels - 14.

Now let's assemble the necessary tools:

hacksaw for metal;
grinder;
screwdriver;
welding inverter;
drill;
hammer.

The following materials are needed:

1 mm steel sheet with an area of 2 square meters. m;
wheels;
tube that we use as an axis. It can be replaced with fittings;
corner for wheel axle support struts 25x25 mm;
thin-walled tube for handle and cargo racks with a diameter of 20 mm;
nuts;
cotter pins.

When everything is selected, we get to work.

Assembling a garden wheelbarrow

Based on the finished sketch, we make markings.
We cut out the blank for the body.
From the resulting blanks we assemble the body using welding.
Based on the dimensions of the body, we assemble the chassis:

we put together the base from parts 4 and 5;
We weld the pads to the base;
We attach the racks to the linings;
We weld 3 ribs to the base and uprights;
We install the body on the assembled unit and weld it to the ribs;
We apply the remaining rib 3 to the upper edge of the body and secure it by welding;
We weld levers to the lower rib, body wall and upper rib;
we fix the linings on the levers;
We weld stop 10 to the body, and support 12 to it;
to impart rigidity to the structure, we fix ribs 9.11;
We weld the strips to the base, having previously drilled holes in them;
insert the axle into the wheel and secure it. This completes the assembly of the garden wheelbarrow.

Barrel trolley

Your cart will cost much less if you use a metal barrel as a container. For this:

cut the barrel lengthwise;
we make a frame in the shape of the letter A;
We weld it to the frame of the rack;
fix the barrel on the base;
We mount a wheel in the bow.

The opposite parts serve as handles. That's it, the car is ready.

Wheels for garden wheelbarrows

Wheels for garden carts are easy to purchase, but if you have them left over from a bicycle or from a moped or motorcycle, then these are quite suitable. The best wheels are pneumatic, i.e. those that are pumped up:

they increase the load capacity of the wheelbarrow;
increase cross-country ability. The wheelbarrow will be able to walk on uneven surfaces and moves easier on soft ground.

they are reliable because the manufacturing plant has a strict quality system;
the disks of these products are made of galvanized steel and high-quality polypropylene;
On some models, the bearings are protected from moisture and small particles.

Let's look at an example of making a two-wheeled garden cart using a motorcycle wheel.

Two-wheeled garden carts made from waste

Collecting all sorts of unnecessary things at home, for example:

old metal bed;
motorcycle wheels lying around;
metal scraps.

You can make a wonderful garden cart with your own hands.

We will need:

separate the arms and legs from the bed;
metal 1 mm sheet;
motorcycle wheels.

The manufacturing technology is simple:

We make a frame from two bed legs and arms;
we cut out the walls and bottom of the body from a steel sheet;
We weld the joints of the parts using spot welding;
we install the container on the frame and adjust the parts to the edge of the box;
we bend the walls of the container to the frame and connect them with a weld;
Now we completely weld the joints of the container;
We make a wheel pair bridge using the legs from the bed. We manufacture axles and hubs;
we attach the axles to the pipe on both sides;
turn the body upside down and weld the bridge to it;
we make linings in the form of brackets and strengthen the structure;
secure the wheels to the axles and return the cart to its normal position;
we perform the handle using bed legs and backrests;
choose a position for the handle that is convenient for you and weld it;
The support leg must be raised, otherwise it will slow down the movement.

Hardwood is also suitable as a material for a garden cart.

Wooden garden cart

To make a wooden cart you will need:

wooden bars 4x4 cm long 1.2-1.5 m;
plywood;
a threaded rod of 0.6-0.7 m, which can be replaced by a piece of pipe;
2 wheels.

We begin the work of making a two-wheeled garden cart by constructing the frame. If there is a pipe, then you can simply bend it in the shape of the letter P. Ours is made of wood, so we knock it out of bars, maintaining a length of up to 1.5 m and a width of up to 0.7 m, and then:

Drill holes in the bottom of the frame. The axle will subsequently be inserted into them. Our axis is a threaded rod or pipe. The portion of the axle protruding from the frame on either side is approximately equal to twice the width of the wheel. The axle in the frame is tightly secured with self-tapping screws or screws tightened with nuts.
We put the wheels on the axle and secure them with cotter pins. They can be purchased or from a bicycle, in general, whatever you can find. If you can’t find anything, we’ll make the wheel ourselves from thick plywood. To make it last longer:

saturate the plywood with antiseptic or drying oil;
we cover the wheel with a metal strip, put on a tire or wrap it in thick rubber;
We insert bearings into the mounting holes of the wheels;
Lubricates the wheels and axle with grease.

3. It’s the body’s turn. We will also make it from plywood. First, we cut out the bottom and firmly attach the part to the frame. Options are possible with the sides. They are installed motionless in relation to the bottom of the box, or with the help of hinges and then they fold. Fastening is carried out as follows:

one side side directly to the bottom;
the second, which, on the contrary, is fastened through an adapter in the form of a bar, its thickness is equal to the thickness of the side;
The end bead is fastened through a transition bar of double thickness. Thus, the cart will become completely flat when folded. To prevent the sides from falling in the working position, install latches or hooks.

Trolley - decoration for the garden

The owners use this wooden cart, the photo of which was taken in the garden, as a flower pot.

As you can see, the wheel here is unusual. Let's take a closer look at its production.

Do-it-yourself prefabricated wooden wheel for a garden wheelbarrow

The assembled wheel consists of:

rim;
knitting needles;

The technology is as follows:

To make the rim you will need a template on a 1:1 scale. Therefore, we mark the circle on a sheet of plywood or chipboard. Its diameter is equal to the diameter of the future wheel. The circle will be perfect if you hammer a nail in the center of the workpiece, then put a strip on it with a length equal to the radius of the wheel, and fasten a pencil on the opposite side of it. By rotating this improvised compass around the nail, we get an even circle. Let's divide it into 8 parts.
Now we make the rim, for which we take wooden planks, carefully planed, in the amount of 8 pieces. Their length is slightly more than 1/8 of a circle. We saw off the ends of the bars at an angle of approximately 67 degrees. Having laid out these parts on the template, we will check how well they fit together.
We mark the wheel axle and cut it out.
We have to make the wheel round. To do this, we lay out the rim parts on the template. We draw a circle along their outer contour and cut out according to this marking. There will be a hexagon on the inside and a circle on the outside.
We use ready-made round sticks as knitting needles. The axle, like the rim, is divided into 8 parts. We drill holes in these places.

All details are ready. We will assemble the wheel, with all connections being adhesive:

place the spokes at one end into the axle;
insert the opposite end of the spokes into the rim parts;
The next step is gluing the rim parts, for which we lay them out on a plane, coat the ends with glue and tie everything together with a strong rope. To prevent the product from warping, place a load on top;
When the glue has dried, we remove its remains and protect it with sandpaper, cover it with stain and varnish.

This video shows the process of making a wooden wheel with curly spokes:

Now that you have familiarized yourself with several options, making a garden cart with your own hands is not a problem for you. All that remains is to choose the right one. The author of this video turned it out no worse than the store-bought one:

When working in the garden or on a construction site, we often have to use various types of auxiliary equipment. This is necessary to perform certain types of work. One of its types, which is used both in gardening and in construction, is the most common wheelbarrow. Recently, they can be easily purchased in stores.

Unfortunately, the wheelbarrows presented in the store have two drawbacks. First, they are not always made of high-quality and durable materials, which is why their service life may be short. Secondly, their cost is often too high, which makes their purchase unprofitable. Today we will talk about how to assemble a construction or garden wheelbarrow with your own hands from scrap materials.

Tools and materials

So, to obtain a high-quality garden or construction wheelbarrow, you must carefully select materials and also have all the necessary tools available. Let's start with the wheels. Any garden or construction cart assumes their presence. Depending on designs and preferences, they can be made of plastic, rubber, cast or pneumatic and have a tread.

If we talk about plastic ones, then this option is suitable in order to lighten the design. But its carrying capacity will be small.

You can simply buy wheels in specialized garden centers, markets or somewhere else. The best option is to buy solid polyurethane wheels and high-quality 4-ply rubber tires. Much will depend on the number of wheels. A one-wheeled wheelbarrow will be simpler and cheaper, but its load capacity will not be as high, and more weight will fall on the person’s hands. A two-wheeler does not have such disadvantages, but it costs more.

It is also easy to allow the use of wheels from any equipment or bicycles. The most popular option is to take wheels from a moped. You can come up with some exotic options. For example, the option on tracks.

But here it should be remembered that cast wheels are almost the most durable solution that does not deform even under a heavy load, and the rubber chamber, which contains air, has excellent shock absorption and ensures a soft ride.

The next important component is the body material. Factory models usually have a steel or aluminum body. At the same time, a bowl made of aluminum will be more durable, and the steel version must have a zinc coating. But that's not all. Other materials may also be used.

Sheet metal must be galvanized or powder coated to prevent rust and corrosion from appearing and spreading.
The body can be made of wood. This is a fairly affordable material if you look at the cost. But it must be treated with various septic tanks and substances in order to prevent its destruction under the influence of natural phenomena. It must also be painted.
Plastic version distinguished by lightness and resistance to corrosion. At the same time, it is extremely susceptible to mechanical damage.

You can come up with a simple option - to assemble a wheelbarrow from old structures. For example, in the form of half a barrel or a metal headboard from a bed. If we talk about the shape of the body, it can be trapezoidal, with a beveled front part or traditional square.

Now let's talk about the handles. They are most often made of metal with special rubber linings, which are lightweight and do not allow your hands to slip off. All wood versions can be equipped with the same handle.

Also a good option would be corrugated attachments made of rubber or plastic, which have special grooves for fingers.

Speaking about the materials that will be needed to assemble homemade cars, the list will be something like this:

roulette;
ruler;
hammer;
marker;
hacksaw for metal or wood;
welding;
angle grinder;
spanners;
screwdriver

If you need to paint a wheelbarrow or treat it with something, it will not be superfluous to prepare brushes of various sizes. And the main thing that you will need to have on hand is drawings, where all dimensions will be indicated, including the actual length, width and height of the structure that should be obtained, as well as the physical parameters of various parts.

How to make it at home

Now let's talk about ways to make a wheelbarrow at home. Due to the impossibility of covering all options for creating such transport, we will limit ourselves to a few solutions that are considered the simplest, most accessible and popular.

From a barrel

To assemble a wheelbarrow from a barrel, a container made of any material – plastic, wood or metal – is suitable. Here you just need to consider what cargo will be transported in it. It will be especially difficult to work with the wooden version. You can assemble two cars at once from an ordinary barrel, since it will still have to be cut in half. The assembly procedure will be very simple:

cut the selected barrel in half into two equal parts;
we make a frame, which in its shape should resemble the letter “A”;
now it is necessary to attach racks to the frame on the sides, which will fix half of the barrel;
in the place where the top of the letter will be, that is, in the bow, you need to attach a wheel;
We decorate the handles using cellophane and electrical tape.

After this, the homemade car will be ready. As you can see, everything is simple and easy.

From a bicycle

You can also make a cart from a bicycle. To be more precise, a special trailer is made for the bicycle, with which it is very convenient to go to the store, say, for shopping. To make such a simple wheelbarrow, you will need two wheels from a bicycle of the same size, several pipes with a round or square cross-section. You will also need 4 thick metal plates, nuts, bolts, plywood or a board, as well as welding, wrenches and a drill.

To start making a wheelbarrow, first we take metal plates, make cutouts in them of a size so that the wheel axles fit into them easily and well. We lay plywood or decking on the previously obtained base, and place a box, a seat, or whatever is needed on it, depending on the purpose. In order to secure the decking to the frame, you will need to drill holes in the frame, and it can be secured using nuts and bolts. This completes the bicycle cart. Making it, as you can see, is extremely easy and simple.

How to make a decorative model?

It should be said that a cart or wheelbarrow can be not only a garden or construction one. It can also perform a decorative function. For example, to be located in the garden and serve as a decorative pot for some flower or shrub. The most interesting is the wooden version, because aesthetically it is very pleasant and is excellent for creating compositions. So, to make a decorative wheelbarrow you will need:

a piece of plywood;
a pair of wheels;
threaded rod, which can be replaced with a piece of pipe;
wooden bars.

First you need to make a frame. If there is a pipe, then we simply bend it into the shape of the letter P. It can be easily knocked down from bars. After this, we drill holes at the bottom of the frame into which the axle will then be inserted. It will be a pipe or a threaded rod. The axial part that will protrude from the frame on both sides should be equal to double the wheel width. The axle in the frame is fixed very firmly using self-tapping screws or bolts, which must be tightened with nuts. After this, you need to put the wheels on the axle and secure them with cotter pins. They can be purchased, or they can be removed from some unnecessary bicycle. If there are none, then you can form the wheel yourself from a piece of thick plywood. In order for it to last as long as possible, it is necessary:

first, the plywood should be soaked in drying oil or an antiseptic solution;
the wheel should be covered with a metal strip, put a tire on it and wrapped in thick rubber;
Bearings should be installed in the holes for landing the wheels;
Lubricate the wheels and axle with grease.

The last stage remains - to form the body. It is also usually created from plywood. First you need to cut out the bottom and firmly fasten the part to the frame. If we talk about the sides, then different options are possible. They are mounted motionless in relation to the bottom of the box or using hinges, after which they can be folded. Fastening should be done as follows:

one side should be attached directly to the bottom;
the second, which is located opposite, is attached through an adapter in the form of a bar, its thickness will be equal to the side thickness;
the end board must be fastened through a transition beam, which must have double thickness, that is, the trolley will be simply flat when folded;
To prevent the sides from falling when they are in the working position, hooks or latches should be installed.

Safety precautions

If we talk about safety precautions in the production of garden and construction carts, then we should talk specifically about safety precautions when working with tools - a hammer and a hacksaw. Also, special attention should be paid to safety when working with an angle grinder. In this case, you should remember the basic rules for working with this tool.

Try to do without a wheelbarrow at the dacha or in a country house, it won’t work.

It is necessary for moving cargo, harvested crops, and fertilizers.

A one, two, or four-wheeled assistant in a store is inexpensive, however, if you assemble it yourself, it will be no less useful.

What are there

A wheelbarrow is distinguished from a cart by the number of wheels. A design with one wheel is called a wheelbarrow; if there are more than one wheels, we are dealing with a cart.

One-wheeled “equipment” is indispensable for the garden. Vehicle maneuverability is good for narrow stitches.

The minimum width of the wheel will help you carefully transport the load without damaging the plants. The cart is not suitable for such tasks. But it is necessary at a construction site, barnyard, cleaning up garbage accumulated after winter and much more.

It is reasonable to have both types on the farm; the wheelbarrow is not stable, one wheel requires tension when moving. It is more convenient to carry loads on two or four-wheeled structures.

Advice: a wheelbarrow is made for certain purposes, those jobs that require the presence of such wheeled vehicles. For example, for applying fertilizers.

Another reason to get both a wheelbarrow and a cart is to use it for different purposes. If manure is first removed from the livestock farm, then it cannot be used to transport crops from the garden or vegetable garden. Therefore, making yourself an assistant is the right decision.

Where to begin

From a drawing, a diagram suggested by imagination. Everything made with your own hands lasts longer, brings more benefits, and also beautifies the world around you.

Drawings and diagrams are offered in abundance by folk craftsmen, you can watch videos, scroll through photos, but you still have to make a sketch yourself. Do not buy parts in the store when there is an abundance:

metal scraps;
wheels from an old cart, bicycle, motorcycle, moped, scooter, baby stroller, furniture wheels preserved from Soviet times;
pipe cuttings;
parts from a broken exercise machine;
corner;
parking brake stop from a bicycle or motorcycle;
fastening and connecting parts.

Note: As soon as it becomes clear what set of elements will be used, make a drawing.

With all this, you can assemble more than one mobile structure.

Transportation for one bucket

We assemble a garden wheelbarrow for a summer residence from metal from the base:

we measure metal sheets;
We weld them together into a container of the required geometry;
We make a frame from pipes with the required axle load to suit the dimensions;
we connect the base to the container using fasteners or welding;
fasten the wheel;
we make parking stops;
We put rubber hoses on the handles for convenience.

The hand wheelbarrow is ready. You can conduct a crash test and send the product to the garden.

You can adapt any barrel to a baud container - plastic, metal, wood. With the last one, you'll have to tinker. A barrel makes two wheelbarrows or carts!

A construction or garden wheelbarrow is assembled in this order:

cut the barrel condemned to be thrown away in half;
we make a frame similar to “A”;
we attach the side posts to the frame, securing the half of the barrel;
where the top of the letter is, we attach the wheel.

Important to know: don't throw away old things, reusing them can be both fun and useful!

We decorate the handles using electrical tape and cellophane, and the homemade design is ready. Now let's start assembling the second assistant.

If there are wheels from a motorcycle, an old Cossack, or a moped lying around, and a bed with armored mesh is in the way in the attic, we can assume that there is already a two-wheeled or four-wheeled self-propelled cart for the household:

cut out the mesh;
We mount wheelsets for welding or fastening;
We make the bottom and side walls from a large metal sheet; wood and pipes are suitable for this;
We adapt the handle, U-shaped, it’s more convenient.

The cart is powerful. Depending on what kind of bottom it has - metal or another, you can transport a small cart of hay. It will be useful for transporting firewood and building materials, and will be especially relevant if construction is planned.

Landscape decoration

An old wheelbarrow or trolley that has served its purpose can become an exclusive decoration of the site.

Landscape designers often use these options to create interesting flower arrangements. Everything is useful for landscaping at home.

Soil is placed in an old wheelbarrow, petunias or other flowers are planted, and the result is a beautiful decorative detail that attracts attention. To enhance the effect, add the same old vase, pot, broken cups, children's toys, everything that is necessary for the idea.

About the benefits of home creativity

Fantasy can turn a trough into a car. Make a beautiful wooden cart from scattered pieces left over from construction.

The wooden structure is useful for landscape designs. You can assemble anything from scrap parts.

The benefits of such creativity have different aspects:

financial - money is not spent, but the item is purchased;
aesthetic - beautifully made things transform the interior;
educational - a good example for the younger generation;
creative - the embodiment of fantasies makes life not boring.

How to make a wheelbarrow with your own hands, see the instructions in the following video: