Make an ashtray with your own hands. Do-it-yourself garbage cans, trash cans and ashtrays for your dacha

If a smoker lives in the same living space as you, then you know firsthand that there are never too many ashtrays. They can wear out over time, lose their attractive appearance, break, break and crack, and sometimes simply disappear. Therefore, it is necessary to have a couple of these accessories in reserve. Buying such a thing is very simple. Stores are replete with goods of this kind. But I want the object not only to serve its owner, fulfilling its direct function, but also to evoke pleasant emotions or eloquently testify to silent feelings. Therefore, it is much more pleasant not to buy a soulless finished product, but to make an ashtray with your own hands.

Ashtrays are made in various shapes and configurations: convex, flat, rectangular, round, square, curly. They can be with a lid so that the smell of cigarette butts does not spread throughout the room, or without it.

The material for the manufacture of this household item can be wood, stone, metal, shells and even thick plastic.

Some ideas for homemade products

The most common option for a DIY ashtray is to make it from a beer can or drink. By cutting off an empty carbonated drink container, you get a primitive urn for cigarette butts. To make the product more cultured and elegant, you will have to work a little.

The step-by-step master class, shown in the illustration below, explains in detail how to make a cute ashtray with sides from an ordinary metal can.

Salt dough is an excellent material for making various crafts from it. It is plastic and can take on any shape when sculpted. After drying in the oven, salt dough products harden and do not change their shape. All these qualities are perfect for creating an ashtray from it.

You can fantasize about the shape and size of the smoking attribute made from dough forever. Experienced craftsmen can handle the presented specimen, but beginners need simpler models.

Properly kneaded dough is half the success when making crafts from it. There are many recipes on a given topic: based on glue, vegetable oil, baby cream. The best is the classic method, thanks to which the dough is moderately elastic, plastic, and does not crack when dried. This mass contains only fine “Extra” salt, water and wheat flour.

A more spartan and simple version of a wooden ashtray can be made from four boards. Even a schoolboy can cope with this work.

To do this, the blanks are glued together. Next, the product is dried for at least 4 hours. After this, the craft is sanded with sandpaper, optionally tinted with stain or a special dye and covered with a mordant.

As a gift for some event or holiday, decor lovers can decorate an ordinary glass ashtray. Compositions made of shells on such an accessory will look not only stylish, but also sophisticated. Such a gift will take its rightful place in the interior of its owner and will become a real decoration of the room.

Instructions for decoupage are given below:

Degrease the glass surface with an alcohol-containing liquid;
The selected design is glued to the bottom of the ashtray using acrylic varnish. It is better to use a marine theme so that the item is executed in the same style;
Next, the ashtray is tinted with white or blue acrylic paint;
Using a glue gun, shells, rhinestones, beads, and other small parts made of polymer clay, prepared in advance, are glued onto the prepared surface;
If necessary, the finished craft is painted in the desired colors.

Options for professionals

Wooden ashtrays are less durable due to the holes that form in them, and there is always a risk of fire from an unextinguished cigarette. And yet, a smoking accessory carved from wood is in great demand and respect.

It is quite difficult to make such a model. To work, you will need special sawing and lathes, as well as specialized tools such as chisels, clamps and files. But this will not scare true masters, and the end result will delight them with its spectacular appearance.

Masters of chasing and artistic forging can create a masterpiece from metal.

With the help of a welding machine, the golden hands of craftsmen produce exclusive original works presented in the photo.

Video on the topic of the article

Even more ideas for inspiration are contained in a selection of videos that reveal the secrets of craftsmen and contain various master classes on making ashtrays with your own hands from glass jars, ceramic tiles, gas cylinders and other materials.

An ashtray is not at all difficult to make with your own hands. It can become an unusual gift or interior decoration.

Making your own ashtray from a beer can

To make an ashtray from a beer can, as in the photo above, we will need:

Metal can for beer or any other drink
Metal carving scissors
Work gloves
Pliers

So, to make an ashtray, you need to decide on the choice of drink can. Using metal scissors, cut off the top and lid from the can. She won't be needed anymore.

The walls of the remaining part of the jar are cut into strips with scissors. The more stripes, the more “petals” you will get in the end. You need to wear gloves when working with metal, because it is very sharp after scissors.

When the wall of the jar is cut, the strips can be folded in half and slightly diagonally. It turns out that each strip ends at the next one. This is how you need to proceed with all the segments, as shown in the step-by-step photo instructions below.

The end result should be a flower-like cup. The metal ashtray is ready!

Ashtray made of shells.

An ashtray made of salt dough or shells can decorate not only a room, but also

its owner's office. This ashtray will be made using the reverse decoupage method. The decor of the ashtray consists of natural shells or shells made of wood.

For work we will need:

Transparent glass ashtray
Leg-split
Natural or artificial shells
Card for decoupage
Acrylic paints and varnish
Hard brushes
Putty
Nautical themed pendants

Before starting work, the surface of the glass ashtray base must be cleaned and degreased with alcohol. Next, you need to glue a printout of the sea map face down to the bottom of the ashtray. Excess paper is removed using dry sandpaper.

To give the ashtray the appearance of an antique item, you will need to cover it with a craquelure substance. Thanks to this coating, cracks will appear on it.

To make the cracks more visible, after the craquelure has dried, they are filled with bitumen. Now they are noticeable and have become visually deeper.

The instructions for the craquelure may indicate that its top layer must be washed off. There is no need to do this because the yellowness from the top layer matches the vintage style of the ashtray.

Now you need to make the entire ashtray the colors of the applique on its bottom. To do this you need to mix several acrylic paints. You will need a light olive color.

The sides of the ashtray need to be painted with a thick layer of the resulting primer.

The bottom of the ashtray needs to be painted with white. The work should be done with gloves in a place prepared for this, otherwise there is a risk of staining things in the room.

The sides of the ashtray are again primed with putty. It is desirable that the layer be dense. When the putty is applied, the ashtray needs to be rolled in sea sand and small shells.

Already at this stage the thing turns out to be very beautiful. After all the walls are covered with sand, they can be coated with transparent acrylic varnish. The layer of acrylic varnish should be dense and uniform, then the sand and putty will be tightly bonded to each other and the ashtray can be picked up without fear.

When the glue has dried, the walls of the ashtray should be painted with gold acrylic paint. Since the surface is not flat, but voluminous, it is better to paint the walls with a hard brush using point movements.

Now you need to take a hard and dry brush. You need to brush it over the protruding parts of the ashtray with black, green, white and mother-of-pearl colors. The main thing here is not to overdo it, because the main color is golden. This is what the ashtray looks like at this stage.

For further work you will need glue. A glue gun is best. They should glue decorative elements to the walls of the ashtray: larger shells and pendants with a marine theme.

Next you will need a hard brush again. Using it, using dotted movements, you should paint the shells on the walls of the ashtray, first green, and then yellow, gold and mother-of-pearl. There is no need to fill objects with paint, just add an interesting color to them. When the walls are painted, they need to be covered with final layers of acrylic varnish and allowed to dry. There should be several layers of varnish so that the relief of the ashtray merges with it.

If the varnish has dried, you can start decorating the bottom of the ashtray. To do this, you should take a thread twine and attach it to the bottom like a snail, not forgetting to glue each section of it.

Now you can remove excess paint using alcohol. The ashtray is ready when the layers of varnish and paint are completely dry. The result was a stylish and unusual gift.

Video selection on the topic of the article

And the video on this topic clearly demonstrates the making of an ashtray. Enjoy watching!

What to do if you want to smoke, but there is no ashtray? It is possible to use a jar or box that is on hand, or you can make it yourself - this usually only takes a couple of minutes. From this article you will learn how to make an ashtray with your own hands from scrap materials as quickly and efficiently as possible.

Ashtray from a tin can

After buying soda or other drinks, there are almost always cans left over. Don't rush to throw them away! You can make many useful things out of them. For example, in this problem they can help us out.

Method 1

To work you will need:

One tin can.
Scissors.

To make the thing you need, you need to follow this algorithm:

Cut off the top of the can.
Divide the walls of the jar into strips - you should get about 14 pieces.
Now the strips begin to bend. To do this, the resulting strips need to be passed through each other until the craft is ready.

Important! You need to be careful while working, as the edges of the cut strips are very sharp.

Method 2

Materials for work:

Can.
Paper tape.
Glue.
Leg-split.

The progress of the work so that the ashtray is finally ready with your own hands is as follows:

Carefully remove the top of the jar as described in the first method.
Wrap the jar with tape.
Lubricate it thoroughly with glue.
Now you need to start wrapping it with prepared twine or rope.
Decorate the finished product as desired.

The end result should be a neat ashtray that will serve you for a long time.

Wooden ashtray

People who know how to work with wood can make quite a beautiful ashtray that can last for many years. You can make an ashtray with your own hands using plywood, a hammer and nails, or you can carve it from a piece of wood.

Important! To make your “helper” heat-resistant, use thermal paint (aluminum or black), which is used to paint stoves and pipes - it can withstand temperatures up to +650 degrees.

We use coconut

Sometimes, when a person eats the contents of a coconut, he leaves behind the hard part of the exotic fruit to use in everyday life. If you still have this part, then you can safely use it as an ashtray. The shape of your craft will come from how the nut was opened.

So, to make such an exotic ashtray, you need:

Bring the edges in so they are flush.
Press the drill to the edges of the shell and drill out the recesses for the ashtray with your own hands - they will contain a cigarette. The recesses should be no more than 1 cm.
To make your craft fireproof, use a special varnish.

Using paper

To create such a craft, you will need no more than five minutes, as it is made in origami style. The diagram can be easily found on the Internet - there will be a huge number of them.

Important! It is worth noting that paper options will not last as long as those described above. Thus, you will have to make such “boxes” quite often.

A pack of cigarettes

If neither method suits you, then you can use an empty pack of cigarettes as an ashtray. But for this you need to remove the inner foil liner - it will only get in your way.

Important! Do not tear off the closing part of the pack - it is very convenient to put out used cigarettes on it.

Video material

There are many items that can be used for completely different purposes. So, from a coconut or an unnecessary tin can you can make a very necessary thing. From this article you learned how to make an ashtray from paper and other materials that you can always find on hand.

We can make the simplest ashtray from an empty tin can

Another version of the video, where in addition to aluminum cans, they also show how to make cute disposable options from plastic. You just need to remember the fire safety rules when making such cute things.

But here is a variant of a bottle ashtray, here there is immediately the possibility of combining two bad habits) (We must also remember about health, but it’s fun to see what our invention is ready for).

Here, too, there is plastic, a cool process, everything is detailed.

So they came up with a car version:

You can adopt this experience and do something similar.

Now let's talk a little about the process, while having already seen enough of the ready-made options for handicrafts and skillful hands, we ourselves can't wait to get down to business.

First of all, we remember that we are working with a cutting tool, and we will be dealing with sharp edges and cutting edges of metal, tin, and burrs. Let's also worry about the availability of brilliant green (units), bandages and plaster nearby.

We will also need pliers.

In addition to the simplest examples given, you can also make your own, very beautiful and complex, original works. To do this, you need to decide on the materials. You can go to an art store, which probably sells everything you need for sculpting. For example clay, and the like. After firing, the finished work can be painted with special paints, or decorated with stones, ornaments, or covered with glaze. You can also use any building mixtures for modeling. The original shape can be sculpted from plasticine. And after hardening, separate the plasticine and bring the product to its finished form.

I have seen many different types of ashtrays in my life.

Most often they were made from scrap materials and were not original.

The most interesting was the ashtray made from a cigarette pack.

I think you can find this design on the Internet.

You can make an ashtray at home from just about anything. From cans of Pepsi, Cola, Fanta, Spray, beer. From any glass jar, depending on how much you smoke. A jar of baby food, absolutely anything, might even work. From an old unnecessary mug, from the same saucer. Can be carved from wood. This is only a small part of what you can make an ashtray from. The main thing is imagination and everything will work out.

Here are two options for ashtrays made from soda water.

Cut off the top of the can, then cut the walls into strips. We bend the strips, throwing them through each other (see photo) until the ashtray is ready. Be careful with the edges of the jar - they are very sharp!

Carefully remove the top of the can. We wrap it with paper tape, then spread it with glue and start wrapping it with rope (see photo).

The results are original and interesting ashtrays.

Empty cans or glass jars make the best ashtrays. Glass jars are best stored with lids. I smoked it and threw it away. Tin cans have to be packed in a bag so that they do not smell strongly 😉 To have a beautiful ashtray at home, you need a housekeeper who will regularly shake out cigarette butts from it and wash it. In modern conditions, a modern ashtray is needed. Let it be banal and ugly, but it won’t smell 😉

An ashtray, a candy bowl, a vase for keys, remote controls, and mobile phones can be made from gramophone records. Moreover, no one uses them now.

Bend the edge of the wire (about two centimeters) 90 degrees and insert it into the hole of the plate. Holding the long edge of the wire, bring the plate to the switched on burner. Hold until the plate becomes soft and the edges sag.

You will get an ashtray with wavy walls.

Materials used:
- glass ashtray;
- printout with a drawing of a compass and map;
- acrylic paints and varnish;
- two-component craquelure composition;
- seashells (whole and broken);
- sisal twine;
- hot glue;
- white putty;
- sandpaper;
- artistic bitumen.

1. Completely clean the surface of the ashtray from dust, dirt and skin secretions.

2. We apply the printout to the bottom of the ashtray, choosing the best position. We glue it to the bottom with acrylic varnish, expel the air and excess moisture.

When the paper dries, remove the excess paper with sandpaper along the edge.
3. Apply craquelure composition to the side part. Here you need to strictly follow the manufacturer’s recommendations, as some points may differ. In our case, we used a craquelure composition from Maimeri (Italy).
We fill the cracks with bitumen.

4. Mix ocher, white and yellow medium. The result is a shade close to the color in the center of the card. We use it to tint the outer part of the ashtray. After drying, apply acrylic varnish in several layers.

There is no need to worry if the layer seems insufficient in the light - we will fix everything in the next step.
5. Now we coat the sides with one or two millimeters of putty, at the same time gluing the crushed parts of the shells.