The question of organizing order in shoes sooner or later arises before every person. It is especially relevant for women who love to buy more and more new shoes. A store-bought shoe cabinet is not cheap and, moreover, very often it simply does not fit into the interior design you painstakingly create. That's why it's much better to make a shoe cabinet with your own hands. Moreover, this process is not at all complicated and very interesting.
The perfect shoe cabinet
So, what should a shoe closet be like? In order for such a cabinet to fit perfectly into the interior of the hallway and perform all the tasks assigned to it, it must meet the following characteristics:
- A shoe cabinet model should combine reliability and safety. Always make this piece of furniture from high-quality and safe materials.
- The selected model must be made in accordance with the general style of the hallway. For example, for a minimalist hallway, a small cabinet of the correct shape and without excessive decor will be suitable.
- The closet must strictly correspond to the size of your hallway. An option that is too large and massive will clutter up a small hallway, and one that is too small will get lost in a spacious hall.
- The selected model should have a sufficient number of sections for shoes for different seasons.
- And most importantly, the shoe closet should be spacious enough, especially if it is located in an apartment where a large family lives.
Choosing the type and shape of a shoe cabinet
Who would have thought that a shoe closet (or, simply put, a shoe rack) could be made in so many different types. Let's get acquainted with different shoe rack designs that you can implement with your own hands.
Here, I’m sharing my impressions of making a folding shoe rack for the hallway. I purchased the accessories for 50 rubles. per set. But I had to tinker with the rest... I'll tell you the story of its creation.
The mechanism of folding shoe racks is new to me, so I immediately went on the Internet to look for additive diagrams (looking ahead, I will say that I still found a normal additive, but this was after the product was manufactured, and therefore this will be covered in a separate article). We weren't able to dig up anything particularly meaningful. First I found this diagram. And I was happy... 
But I still had a problem with the calculations, so the search continued and I found this file" " . Here I completely relaxed and, rubbing my hands, did not compare both of these schemes. I stupidly took the dimensions, put together a project based on them, adjusted the dimensions to the required room and sent them to cutting. As practice has shown, I got excited.
I’ll immediately make a reservation that in the posted project, as well as in the detailing, the dimensions have already been corrected.
Project details attached
| Part name | Length | Edge | Width | Edge | Qty |
| Retractable facade 16 mm | 156 | = = | 464 | = = | 1 |
| Folding facade 16 mm | 371 | = = | 464 | = = | 2 |
| 16 mm post | 940 | - - | 292 | 2 | |
| drawer front/back 16 mm | 98 | 410 | - - | 2 | |
| drawer side 16 mm | 98 | 250 | - - | 2 | |
| Tsarga 16 mm | 468 | = = | 120 | 1 | |
| Horizons 16 mm | 500 | - - | 292 | = = | 2 |
| Detail under the fronts 16 mm | 468 | - - | 23 | 1 | |
| shoe rack 10 mm | 453 | = = | 86 | 2 | |
| shoe rack 10 mm | 453 | = = | 136 | 4 | |
| Drawer bottom fiberboard | 442 | 250 | 1 | ||
| fiberboard back wall | 484 | 956 | 1 |
The edge used is 0.4 mm. If you change by 2 mm, you will definitely need to narrow the facades.
The back wall is made “In the groove”, if you are going to make an invoice, you need to expand it in each direction by 16 mm.
So, the parts are sawed and piled up. We select the racks from them and begin the additive. The most important point. There is no way to make a mistake here, because closing 20 mm holes later will be problematic. We start marking from the lower front corner of the rack. According to the filler pattern, I marked the hole for the axle. 
23 mm is a part under the facade so that the mechanism does not rest against the bottom. 7 mm - gap. Another 7 mm is an empirical value that is on the diagram, but its size is not labeled. I took 2 mm from the diagram, 44 was obtained by adding 28 mm from the diagram to the thickness of the facade of 16 mm.
In the resulting location, I drilled a 20 mm blind hole with a depth of 10-12 mm. 
We press a plastic insert element into this hole. 
We mark the border of the facade, set aside 7 mm from it and repeat the manipulations with both posts. 
Please note that both posts have a groove selected for the back wall of the fiberboard.
We mark the guides for the drawer. For example, on the side wall of the box I set aside 40 mm from the bottom, which means on the stand of the box I set aside 50 mm from the bottom border of the drawer front. 55 mm on this line is 37 mm (fixed size for ball guide + inset front thickness 16 mm).
We fit and install the remaining holes and fittings. The horizons are attached to the posts from below with confirmats, and from above - with minifixes. 
After this, we begin assembling the box: we attach the lower horizon, put the back wall in the groove, and install the upper horizon. 
We mount the under-facade part (I simply screwed it in with three screws from the bottom so that nothing would split and there would be no confirmation plugs on the sides). 
After this, we move on to assembling the folding elements themselves. The planks are attached with self-tapping screws at the end (it is advisable to first drill holes for them so as not to split anything).. First, I assembled the baskets and decided to screw the facades to them, but that was not the case - it was impossible to get to the mounting holes, I had to partially disassemble and attach the facade and collect again.
I would advise you to start with the facades. Mark the mounting holes. I didn’t have a diagram for them, so I had to use the good old “Scientific Poke” method. The values turned out to be as follows. By the way, they are not far from the truth (see the article about the correct additive - will come a little later) 
We place the mechanism on the facade and fix it with six self-tapping screws. 
All that remains is to put the shoe racks in place and screw on the handle and the shelf can be mounted in the box. 
To install it in the box, we simply insert the assembled mechanism inside, position it opposite the previously drilled 20 mm holes, insert the axles into them and hammer them in with a hammer. Immediately drill with an 8 mm drill and install a stop pin. To do this, you need to retreat 172 mm from the axis, and 34 mm from the edge of the rack. 
Our bedside table is gradually starting to take on a finished look. 
We perform exactly the same manipulations with the second shoe rack. Then we move on to assembling the drawer. This process has already been discussed many times and we will not dwell on it. 
All that remains is to put it in the designated niche. Screw the handle to the facade and set it to " ".
We screw additional magnetic latches into the box and strike plates to the facade. 
That's it, the work is finished. The bedside table now looks like this. I would like to note a small drawback - the mismatch of the texture of the facades. To correct this, it was necessary to place them on the sheet as they should be mounted, or to make the drawing horizontal.
Finally, I’ll add that this structure is quite unstable, so it will definitely need to be attached to the wall. TO AVOID TIP.
Storing shoes is an eternal problem that needs to be solved somehow. The lucky ones who have a dressing room with shelves for shoes are probably not interested in such problems. It’s great if you can dedicate an entire room in your house for dress shoes, casual slippers, ankle boots and winter boots. If this is not possible, then there are two options left: we put all the shoes that are out of season in boxes and send them to the top shelves of the closet or to the mezzanine (if there are any). The second and more realistic way out is a spacious shoe closet, proudly standing in the hallway. Why proud? Because it should be like the fifth dimension - an incredible amount of shoes of all household members should fit into it.
Where can I get it? The easiest option is at the nearest furniture store. But let’s be upset right away - most domestic shoe cabinets are either of poor quality or resemble a waste product. Not in the sense of purity, but associatively with the lame and lame. Or bow-legged, it doesn’t matter. Imported cabinets are incredibly expensive and it is not a fact that they will last long. Why are we worse than the pedantic Germans or the aesthetes of the Italians? Nothing... We have selected photos of shoe cabinets for the hallway and are sure that among them you will find a suitable option.
Hallway cabinet design
The first two shoe cabinets are completely ordinary, but they have opening shelves that are a shoe Klondike. The water box can fit 4-6 pairs. The only negative is that there is nowhere to put high boots. The second closet is a small bedside table for shoes and a bag for hats and scarves. Creative and convenient.
If you have little space, then make a tall shoe cabinet in the hallway, as in the first photo. The second cabinet takes up much more space, but its surface serves as a table for small things, such as keys or umbrellas.
The first option is simply gigantic; all the shoes of the household will fit into it. And the second cabinet is a hanging one. You can put your phone on it. Our site build simply ru really liked it.
You can place a mirror above a low cabinet and place a vase on it. in the second photo there is a wardrobe on brackets, with space for bags at the top.
Wooden cabinets for craftsmen. They look stylish and elegant.
There seems to be nothing special here, but such shoe cabinets in the hallway are just a dream for any housewife. Neat and very tidy.
Very simple and tasteful. This photo shows a particularly unremarkable piece of furniture that is convenient to use. But as for me, this is more of an option for a summer residence.
And this is two-in-one, like shampoo. At once there is a locker and a comfortable ottoman for sitting.
The second photo shows open shelves of an unusual shape. Not very neat, but original. Our website Stroy Simply Ru believes that it is better to make a cabinet with doors so as not to expose this “charm” to public display.
The first photo shows the drawers under the stairs. This is an option for a private house or a two-story apartment.
Nothing special, but nice and neat. Pay attention to the mechanism in the first photo - you can buy one at a furniture store for crazy hands.
Here all the relish lies solely in color and combination. White is simply elegant, and white and black is stylish.
Natural wood always looks noble. But it doesn’t really suit modern interior styles. Although the second photo shows a sort of mix of styles and trends.
There are just neat white closed cabinets.
And this is for tireless creatives. Nobody will deny you originality.
Simple and neat.
For lovers of white interiors, this is just the thing. But if you have small children, then the cabinet will quickly turn from white to gray, and traces of small dirty hands will treacherously show off on the doors and handles.
How to make shelves for a shoe closet in the hallway
The first photo shows an ordinary closet with even shelves. On the second there is a round cabinet that rotates around its axis. Such axles are sold, but you can make them yourself.
The first photo shows a special mesh for shoes in drawers. On the second there are boxes with plastic filling.
The first photo shows a door on brackets. It moves out of the closet horizontally along with the shelves and all the shoes. This is more convenient than many separate drawers - you don’t have to open everything to find the right pair. For those suffering from sclerosis and memory loss, as well as for careless household members, this is just the thing. The second photo shows just round tubes.
Two options for a hallway cabinet with straight shelves. Please note - there is a place for shoes and sneakers, and there is a compartment for high boots.
Spacious wardrobe and the same cabinet.
A very simple option - the first shelf can be made from any boards and slats, even from unnecessary boxes. The second one turns to the wall.
We hope that our website build simply ru answered your question about how to make a shoe cabinet with your own hands.
Often, in the process of decorating and arranging various premises, people encounter certain difficulties, since they cannot choose the optimal furniture for the chosen style. In this case, an excellent solution is to independently produce various interior items. In the hallway there may be limited space and unusual shapes of the room, so you can create a shoe cabinet with your own hands, perfect for the area chosen for it.
Initially, you should decide what material will be used for the work, as well as what shape and size the future structure will have. The materials most often used for these purposes are:
- MDF, which makes it possible to obtain environmentally friendly, reliable, inexpensive and resistant to various influences structures;
- Chipboard is the most affordable material, but it is important to make sure that it does not contain formaldehydes, and due to the fragility of the material, you should work with it carefully so as not to damage it;
- plywood has good quality and strength, so it is often used to create various interior items, but when using it you need to pay attention and spend money on finishing the structures being created;
- natural wood is considered the ideal solution for making a shoe cabinet with your own hands, as it is environmentally friendly, beautiful and reliable.
If it is not possible to spend a lot of money on a cabinet, then chipboard is chosen. If you choose high-quality material, it will be quite durable and reliable, and with proper care it will last a long time. It is incredibly easy to work with, so the process of creating a design does not require significant effort, and you do not need to have any specific skills or use unusual tools.
After choosing the material, the preparation of all elements that will be used in the work process begins, these include:
- the chipboard itself, and the boards are available in numerous colors, which makes it possible to create a design for shoes in the hallway that has the optimal shade;
- fittings designed to open doors if a closed piece of furniture is intended to be created;
- tools, which include a screwdriver and a screwdriver, a bit for self-tapping screws and confirmations, as well as an awl and a drill for confirmations.
Most often, slabs of two different colors are chosen for this design - wenge and a light shade, since this combination ensures a truly attractive bedside table that fits well into different interiors. No complex or unusual tools are required for the job, since the shoe cabinet is considered easy to create, so no specific fasteners or complex connections are used.
Tools
Materials
Detailing
This process involves accurately determining the dimensions of all parts that will be needed in the process of forming this piece of furniture. Detailing makes it possible to end up with a truly high-quality design, in which all parts have the required dimensions, and there are no distortions or other defects.
The main details of the future bedside table include:
- roof and bottom of the product – 1100*250 mm;
- sidewall and internal stand part – 2 parts made of chipboard 668*250 mm;
- internal shelves located horizontally – 3 parts measuring 526*250 mm;
- facades – 2 parts 311x518 mm;
- partitions for overshoes located inside the structure - 4 parts measuring 510x135 mm, 4 parts - 510x85 mm and 4 parts - 510x140 mm;
- rear wall – 1 piece measuring 696x1096 mm.
When using such parts, it is ensured that a cabinet is sufficiently voluminous and convenient to use, equipped with 4 sets of shoe boots, handles and thrust bearings.
Preparing parts
As soon as all the necessary drawings have been made, on the basis of which the process of creating the structure is carried out, and the detailing has also been completed, you can begin to prepare the parts. This process is not considered too complicated, so it is easy for beginners.
A special diagram of the future bedside table must be made first, since it must be used when forming various parts, otherwise there is a high probability that there will be various irregularities or other problems in the design.
How to make parts? The procedure for creating them is divided into stages:
- a large Whatman paper is prepared, onto which the drawings are transferred, so that optimal patterns will be obtained;
- they are carefully cut out and then applied to chipboard sheets;
- the paper is securely fixed to the plates;
- The cutting of parts begins, and for this you can use a jigsaw, a special wood knife or other tool.
Particular attention must be paid to the evenness of the cut parts, otherwise the resulting structure will not have ideal evenness.
Another significant point is the edging of parts. This process can be performed using an edge made of paper or plastic. Since all actions are performed at home, a paper edge is usually used. This is due to the fact that when using a plastic product, a specialized machine and professional expensive glue is required, which is heated to a high temperature before use, which guarantees excellent adhesion between the parts of the cabinet. Therefore, people who do this work themselves choose paper edges. It is advisable to carry out the lining using a sufficiently thick edge, the thickness of which will not be less than 2 mm, thanks to which the shoe cabinet will not only be beautiful, but also resistant to various influences.
Finished parts
Parts are pre-ground
The edge is attached with an iron
All necessary holes are prepared in advance
Assembly
As soon as all the parts necessary to create a cabinet in the hallway with your own hands have been prepared, you can begin to connect them, which guarantees the assembly of the structure. During the assembly process, you should constantly focus on pre-made drawings, as well as check them, since often certain parts are created incorrectly, so they need to be adjusted.
To assemble a bedside table correctly, the correct sequence of actions to complete this process is taken into account:
- first, the frame of the future structure is assembled, for which 4 main parts are used, and these include the bottom and lid, as well as two sidewalls;
- Confirmats are usually used to assemble the box, since the various plugs from them will not be visible anyway, and minifixes or furniture corners of suitable size are often used for these purposes;
- after receiving a reliable box, the installation of internal elements begins, and they are fixed to the sides and bottom using confirmations, but they are attached to each other and to the roof using metal corners;
- Next, the rear wall of the structure is mounted, and usually it is completely created from thin fiberboard, since it will not be subject to significant loads, and it will not be used for any purposes, therefore it acts only as a decorative element.
When attaching the back wall, you can check the evenness of the resulting product, since if there are any distortions, they will be immediately clearly visible, and if they are detected, it is recommended to redo the product.
Thus, assembling a chest of drawers or a cabinet yourself is quite simple. Photos of various such home-made structures are presented below, and each owner of residential property has the opportunity to realize his own unique ideas, so you will receive an original and unique product that is perfect for a specific corridor.
The box and internal shelves are assembled separately
Internal shelves are inserted into the body without additional fastening
Attaching the wheels
DIY portable shoe rack
An excellent option for a simple wooden shoe rack that you can easily make with your own hands from wood. This shelf has a large surface area, which means you can put more of your shoes on it. This shelf is also perfect for toys, books, tools, shoes and other things. The shelf is highly mobile, which means that you can place it at any time wherever you might suddenly need it.
Shoe rack carousel (step-by-step photos, drawings)
You can make such a multi-story shelf with rotating shelves for shoes using any ready-made cabinet with a square-sized base, or you can make the cabinet yourself again.
We fix a metal pipe motionlessly in the closet, and then install rotating round shelves for shoes on it. We insert pins into these round shoe shelves, on which, in our own words, our shoes will be located.
The author of the shelf (who, unfortunately, is unknown to us) recommends making two types of round shelves, for 9 pairs of shoes (for children) and 12 pairs of shoes (for adults) (see drawings in the photo below). This way, the closet will fit a lot more shoes and its efficiency will increase.
See step-by-step photos and manufacturing drawings:
Shoe shelves made of pipes
Shoe shelf from pipes
DIY master class
Let's look at the photo on how to make such a shoe rack from metal water pipes with your own hands. See step-by-step photos in the photo gallery below.
This shelf will look great by the window, in the bathroom, hallway, living room or kitchen.
Step-by-step photos of the masterclass:
Floor shelf or table with shelves for shoes in the hallway
Most likely, this option applies more to tables than to shelves. But still, we placed this model here because... We hope that this option for organizing personal information will be interesting to you, and most importantly useful, because... When arranging your home, you need to keep in mind all the options!!!
See below step-by-step photos of the master class
Photo source: dailyinteriordesignblog.com Author Photos: Josh Rhodes and Elsie Larson
DIY bench shelf for books or shoes
This bench shelf is also perfect for toys, spare parts or tools in the garage.
We did not post the entire remodeling process, because... It is unlikely that you will buy a shelving unit to make a bench out of it. Therefore, we have placed only the most necessary photos so that you can simply familiarize yourself with this option. Based on the photo, you can make the same one simply from boards.
Beautifully thread the threads to support the books
Photo source: instructables.com.
DIY shoe shelf
Make four planks and making a regular shoe rack is not at all difficult, but what if we add a little twist. How do you like this option? So to speak, three in one, compact, creative, on wheels. You can adjust the sizes of the main and internal shelves as you need, and mobility is very convenient.
These step-by-step photos will help you build this fun shelf.
Operating procedure
- We decide on the total area of the shelf, this is after we returned from the store with new wheels.
- We prepare the material, measure it, saw it, grind it.
- We take the dimensions of the internal shelves and the height of the racks. It all depends on what shoes will be stored on the shelf; you can provide everything from slippers to boots.
- We make the blanks according to the sizes, you can see how everything is beautifully laid out in the photo.
- Drill holes in the corners for self-tapping screws
- We fasten the parts first on the internal shelves, then on the main ones.
- The wheels require four holes for the bolts, you can make them in advance and tighten the bolts at the end.
The shelf is ready, further decorative work is at your discretion. You can paint it, cover the top shelf with fabric, it’s up to your taste.
Folding shoe rack
It is known that you can never have too many shoes, especially this topic is very relevant for women. But why is it needed? You can probably get by with a regular, stationary structure. The problem, as always, is free space; in a small apartment there is always not enough space, and in the summer, as you know, the number of shoes used doubles. So a folding portable shelf is perfect as an additional place to store shoes for the summer season. Or another option, suddenly you have guests. In order not to create a dump in the corner of the hallway, just take your folding shelf from a secluded corner and organize it. In general, it’s a useful thing, if you like it, make your own folding shelf
not difficult.
The most common tools are a drill, a jigsaw, and sandpaper. The materials are shown in the photo, but it is your choice, boards or plywood, see for yourself. The assembly process is shown in step-by-step photos, everything seems to be clear there. You can read the instructions on the website, link under the gallery. In the photo you can see the shelf in the unfolded and folded state. According to the author, if you have all the tools and materials, it will take a maximum of two evenings to make the shelf.
Photo source www.instructables.com/id/Folding-Shelves
Shelf bench for shoes
It won’t be difficult for you to make such a simple wooden shelf for your hallway with your own hands. Check out the step-by-step photos below to see how this is done. The bench shelf is suitable in the hallway for shoes, in the bathroom, in the children's room for toys, in the room for books, magazines and newspapers.
Photo source: howtospecialist.com
Shoe shelves made from drawers
DIY shoe rack made from wooden boxes
Another option for a shoe rack made from wooden boxes, which you can make yourself.
This shelf is perfect for toys, tools for the garage, shoes, flowers (if you knock out the back wall of the drawers), as well as for other household items.
Below you can find a step-by-step master class on how to make this shelf.
Photo source: instructables.com.
How to make a shelf out of shoe boxes - without nails
This might be the easiest shelf you've ever made.. So, you need to find five boxes and a can of paint. Then take a brush and paint the container in the color that best suits your interior. When the paint dries, that's it, the shelf is ready.
You just have to decide how to put them. If there are small children in the house, the structure, of course, must be connected with bolts or screws, or even better, attached to the wall, this will be more reliable and safer. But if there are no children, then there is no need to fasten them; the boxes are strong enough. And the main advantage you can change the shape of the structure at least every day. Imagine, every day you have a new shelf and no nails
So, for example, today you have a pyramid, and tomorrow a ladder, depending on your mood.
Folded into a durable design, it is very convenient to store shoes. For variety, you can take one box and put whatever you want.
Well, what do you think of the idea?
Photo source creatingreallyawesomefreethings.com
DIY corner shoe rack for the hallway.
Let's see how to make a simple wooden corner shelf with rounded shelves
to your apartment. This shelf is suitable for books, magazines, shoes in the hallway, soap accessories in the bathroom, tools in the garage, as well as kitchen utensils in the kitchen.
Photo source: howtospecialist.com
Rack shelves made of cardboard boxes do it yourself step by step
Watch the master class on how to make this shoe rack using the photo above.
Minuses:
- not very reliable
- not strong
Pros:
- cheap
- Just
This design uses two types of boxes
- these are the big ones from which shelves are made
- these are narrow ones from which drawers are made
All boxes are secured with regular tape.
Adviсe:
- Light items should be placed on the upper shelves, larger and heavier items on the lower ones.
- when you cut large boxes, as shown in the pictures, then from these scraps you can make additional shelves for small items inside the shelves, for this you just need to make cuts in the trim and connect the scraps with a grid.
- These scraps can also be used as additional supports inside the boxes, in problem areas.
Photo source: wikihow.com
Cardboard shoe rack
This is the easiest furniture you will ever make. I present master class on making a shoe rack from cardboard with your own hands , an indispensable thing for new residents. In short: we make three equal strips of cardboard, press them so that they bend well, using a dull knife. We glue the sheets on one side with tape. We make triangles from the sheets and secure them with tape. Fix the resulting triangles with glue on a sheet of cardboard. The pyramid can be made of any size no matter how many triangles you make, it will be like this. Attach another cardboard sheet on top, this will be the top shelf. Anyone can do this kind of thing. This will come in handy before you buy a locker so that your shoes don’t end up lying around.
But that's not all, if there is very little space, you can make a hanging shoe rack made of cardboard, it's even easier. You need to make a rectangle from a sheet of cardboard, like in the photo. Choose the size yourself, depending on what kind of shoes you will put there. Then lay out the box again, and using it as a template, cut the blanks. Then make as many pockets as you need, insert them into each other and secure them at the back with tape. The shelf can be hung on the wall or on the door.
Of course, it’s not a very good option for winter shoes, but in summer it’s very convenient and saves a lot of space.
Secret door - closet and a shelf for shoes
Let's see how to make a secret door in an apartment, for example, in a closet, in a dressing room, in a wall.
If you want to make a secret room, or hide some unsightly part of the apartment to make it look more aesthetically pleasing, then follow the step-by-step photo instructions below.
Don't use loops because your the structure must withstand up to 450 kg! The author of the photo advises using bolts as hinge pins, which should be welded into the frame.
IMPORTANT secure the frame strictly vertically; to do this, use a plumb line. First attach the top mount to the ceiling, and then plumb the bottom mount (see photo).
See step-by-step manufacturing photos:
Don't forget to install wooden door stopper (see photo). Attach a magnet to this stop to keep the door pressed against the wall. Be careful when choosing a magnet; it should attract neither too strongly nor too weakly.
IMPORTANT!!!: According to fire safety rules: all entrances to rooms containing stoves or gas stoves and gas pipes must be clearly visible.
Photo source: wikihow.com
Unusual shoe shelves
with your own hands
Just as a theater begins with a coat rack, so does any apartment with a hallway. Shoe racks are not just a useful piece of furniture, they are part of the interior design, so if you are a fan of creative solutions, you can start surprising guests from the hallway. In this collection you can see some interesting ideas for unusual shelves for shoes
.
Schemes and drawings of shelves for shoes
A shoe rack is not a closet or a sofa, it is easy to make with your own hands. It is much easier to do this if you already have a ready-made project. Of course, you can draw a sketch yourself if you have experience in this matter, but it’s easier to use ready-made diagrams; why reinvent the wheel.
For example, using this scheme to make a shoe cabinet is not at all difficult
There are many types of shoe shelves - The main ones include Bona, Slim, Coupe, Cabinet, or shoe rack - shoe rack. 
For the manufacture of some of them, various mechanisms are often needed, but today it is not a problem to buy any fittings in a furniture store. To save space often use slim shelves, although they have design features, if desired, such a shelf can be made independently. Of course, making it yourself is quite difficult; you need to purchase a lot of different accessories. It’s easier to buy ready-made ones and assemble them yourself. You can see how this is done in this detailed diagram. 
In this collection you can find diagrams of various types of shelves If you have experience with wood structures, these drawings can help with proportions and dimensions.
Save space !
When planning the interior of hallways, one problem most often arises - not enough space. To save a little space, you can use various tricks, for example, here is one of the methods, though only for women's shoes with thin heels. This feature of women's shoes can be used. Attach a long handrail to the wall at a distance of 5 centimeters and the shoes will be held solely by the heel. 
If such an original shelf is beautifully decorated, it looks very original 
from beer do it yourself for shoes
Let's look at how to make a shoe shelf (rack) from glass beer bottles with your own hands. If you already have four beer bottles (or champagne bottles) and two boards, then consider that you have already done half the work. Of course, in addition to this, you will also need inexpensive fasteners, which can be bought at almost any hardware store.
Choose beer bottles with long necks.
The boards for the shelves are sanded and covered with dark varnish.
Surprisingly, these glass bottle shoe racks are distinguished by their durability, as they can support the weight of an adult.
By placing one such shelf on top of another you will get a shoe rack made of glass bottles.
See step-by-step photos of the master class:
The source of the photo could not be determined(((
250+ photos
We learn about the huge variety of shelves only when we start looking for a suitable option for our hallway. Closed and open, one, two and who knows how many tiers, hanging, floor, wall - in general, very different. To get an idea, check out this gallery
And this is only a small part of the options