A method for making a box from plywood with your own hands. Storage systems for children's toys Do-it-yourself chest of drawers for toys

As a rule, we buy a lot of different toys for our children (dolls, cars, soft toys, educational toys, and so on). As a result, they are all scattered in different corners of the apartment. To prevent this from happening, we suggest you find out how and from what you can make a box. At the same time, you can teach your child to be in order.

We use an unnecessary cardboard box

Large shoe boxes household appliances and so on can be reused. Just decorate them and you will succeed comfortable spot for storing children's dolls and cars.

A master class on how to make a toy box with your own hands is described below.

You will need cardboard box, big piece fabrics.
Coat the bottom of the box around the perimeter with glue from a gun.
Unfold the fabric and cover the bottom of the box with the middle, carefully straightening the flap and pressing it against the glue.
Coat all the walls from the inside, stretch the fabric and glue it to the sides.
Wrap the fabric over outside boxes and glue it to the bottom of the walls.
Turn the box over and fold the fabric over the bottom. The flap should be pressed evenly against the wall. Glue the fabric and cut off the excess.
To strengthen the bottom, coat the fabric with glue around the perimeter of the box and glue the cardboard on top.
Turn the box over.
Pin clothespins on top, and put something heavy inside so that the fabric sticks well to the box.

The box is ready!

Boxes with handles

Instructions on how to make a box for children's toys with handles will help you in this matter.

Take two types of fabric, thick tape or rope, glue, and a glue gun.
Cut a strip of fabric. Its width should be greater than the height of the box (it is necessary that the flap can cover the bottom and wrap slightly inside the box). The length of the fabric should completely cover the perimeter of the box.
Glue the cut rectangle of fabric to the sides of the box.
Wrap the excess fabric inside the box on one side and glue it to the bottom on the other.
Measure out a piece of fabric of a different color. It should cover the bottom and walls inside the box.
Coat the inside of the bottom with glue and glue the fabric.
Coat the inside walls and also glue the fabric. Make folds along the edges.
Glue the folds at the intersection of the two types of fabric.
Measure the tape and glue it at the bottom, around the perimeter of the box, using a glue gun.
Measure out two identical pieces of tape. Handles will be made from them.
Glue two strips to the sides of the box.
Glue another tape around the perimeter of the box on top. It should overlap the bottom of the handles.

The toy box is ready!

Pasted box

The easiest way for this purpose is to take self-adhesive wallpaper. Then you don’t have to fuss with glue and wait until all the walls are dry.

But, regardless of whether you cover the future toy box with self-adhesive or paper wallpaper, the operating principle is the same:

Cut a piece of wallpaper long enough to fit around the perimeter of the box.
If necessary, coat the walls with PVA glue.
Glue wallpaper around the perimeter of the box.
Make cuts at the top and bottom of the protruding parts of the wallpaper.
Fold any protruding pieces inside and onto the bottom.

The box is ready!

We use wood

Making a wooden toy box with your own hands is quite difficult. But such an item turns out to be very reliable and will last much longer than a cardboard box.

Also, it can not only be used in the interior as a decorative element. Such a box can become a functional part of the room.

For example, if you put a box under the wall, put a blanket and sofa cushions on top, then a extra bed for sitting.

How to make a box?

For convenience, here is a guide on how to make wooden box for storing toys with your own hands.

Create a sketch of the future box (picture 1). Think about its dimensions, what the height, depth and width will be. Will it be on legs or with its bottom on the floor? Will there be handles and where should they be located?
Prepare everything necessary materials and tools (picture 2). To start, you will need plywood or MDF board. They are sold at a hardware store. But if you have old furniture(for example, a table, chest of drawers, closet), then you can disassemble it and get the necessary materials. You will also need screws and corners, hinges, PVA or wood glue. The tools you need are a simple saw or a circular saw.
If you buy materials in a store, you can ask them to cut the boards for you. required sizes. If this is not possible or you use improvised material, then do everything yourself (picture 3). To do this, cut the board into pieces and saw it. As a result, you should have the following number of parts: four walls (all the same or two different), a bottom and a lid.
Start assembling the box. For this purpose, coat the wall joints with glue (picture 4).
Then connect the two parts with corners (picture 5).
Attach the lid to the box using hinges (picture 6).
Wipe off excess glue with a cloth and leave the box to dry.
Decorate the box. For example, sand it and paint it (picture 7).
Attach a handle and legs as desired (picture 8).

The storage box is ready!

Box of planks

A wooden toy box can be made from planks. There are two collection methods.

Take plywood for the bottom and nail four pieces of wood in the corners. Then nail the boards to them with thin nails. You can make gaps between the wood for better ventilation.
Nail plywood to the bottom of the box on both sides. And nail planks to it. Thus, the sides of the box will be solid, and the sides will have slots.

Making with your own hands various useful household things, such as a plywood box, is not only a pleasant thing, but also a very useful one. Conduct free time In this way, it not only promotes relaxation, since at such moments you don’t think about problems, but will also benefit the surrounding household and the interior.

One of the options - simple to implement and not requiring special material costs - is the ability to make boxes with your own hands. Plywood can be used as a fairly durable, reliable and aesthetic material. This material definitely easy to process, able to withstand heavy loads, and has a wide range of thicknesses. Products made from it are suitable for all occasions. Plywood boxes can be used to store small items and tools. There are many more different valuable ideas for their use.

Plywood Processing Tools

With availability quality tools Even an untrained person can make a box out of plywood with their own hands.

Drill including screwdriver function
Electric jigsaw. To begin with, you can purchase a device with semi-professional functions. In addition to the tool, a set of files is purchased to perform various functional work.
Furniture stapler
Roulette

Material and accessories

Plywood for the bottom. The thickness is selected depending on the purpose of use of the product. It should be thicker than the side walls and lid.

Plywood sheets for side walls
Material for the lid, if a lid is intended
Lid handles
Planks and blocks of wood - for decoration
Finishing and finishing nails
Piano hinges
Decorative overlays
Wood glue
Wheels, if you make the box mobile
Finishing varnish
Wood putty

Plywood boxes can be used for safe transportation of goods, household items, and also for organized storage. Of course you can buy cardboard or plastic boxes, but they are more fragile. Also an advantage self-made drawers is that boxes can be made of any size or specifically for some item, for example, for a chandelier. Well, of course, self-made boxes will cost you less.

When I started making moving boxes, I decided to determine the dimensions of the boxes based on standard sizes plywood 1525X1525 mm. The markings of plywood sheets are shown in the figure.

Based on the specified dimensions, you can assemble boxes of two sizes

length -763 mm width-508 mm height-508 mm
length -763 mm width-381 mm height-381 mm

Of course, the sizes of the boxes are given as an example; you can make your own boxes based on your needs. To make the boxes I used following materials:

Plywood 4 mm thick
Wooden bars with a cross section of 30x30 mm
Carnations 25 mm
Self-tapping screws 55 mm

The thickness of the plywood and the cross-section of the bars can be changed or taken from what you have in stock. The number of sheets of plywood must be determined based on the number of boxes required. For one box you need 4 wide panels for the sides, bottom, lid and two end panels. The bars can be sawed on circular saw from any remnants of lumber, boards, bars of larger cross-section. I cut the plywood sheets according to the markings on a homemade circular saw.

Plywood boxes can be made of two types:

In the first case, the bars to which the plywood is attached remain inside the box. The boxes are smooth on the outside and look neater, but are less durable. Can be used for lighter items.
In the second case, the bars remain outside the box. The boxes look like industrial packaging, but they can be made more durable. Used for heavier items.

Let's look at the process of making boxes with straight sides:

We screw one block at a time onto the outside ends of the box for ease of carrying.
We install a panel lid on top of the box. The box is ready.

For greater strength, the edges of the boxes can be pierced with a special tin strip.

If there are children growing up in the house, then they will definitely need a box of toys. It can be made from a regular sheet of plywood. You can make a plywood box for toys, spending a number of evenings on it, but the children's room will be clean, since there is a special storage place for all small toys.

You can make a plywood box for tools or children's toys with your own hands; to do this, you need to have a drawing with dimensions and a diagram for assembling the box on hand.

A durable and functional toy box will serve for a long time, benefiting children not only preschool age, but also school. For a teenager, such an item will become a special place in which his sports equipment will be stored.

Wood selection

To make a box with your own hands, they use not only solid wood, but also chipboard. Hardwood plywood can be successfully used for this purpose. Surface finished product varnish if necessary. It is important to use non-toxic paints and varnishes making a box out of plywood. If you make a special lid, the child will not pinch his hand.

The front wall of the product and its side surfaces can be decorated with various letters, animal figures made independently. To decorate the walls of the product, you can use a special stencil and paints. Appearance The toy box should be decorated with taste so that the child can enjoy it for a long time.

To make the box easier to move, it is possible to install special wheels on its lower part. In any hardware supermarket, for example, you can buy swivel wheels, and when installing them you must strictly follow each point specified in the manufacturer’s instructions.

Making a box from plywood with your own hands is not difficult. At the same time, plywood is environmentally friendly pure material, which is constantly used in the manufacture of furniture. Thanks to this property, plywood products can be used in interiors where people are constantly present.

Anyone would love a durable and high-quality product, and plywood is just such a material.

Assembling the box will not involve too complicated procedures, since plywood is a material that is quite easy to work with. From plywood you can make a box not only for children's toys, but also for working tools.

Return to contents

Types of materials and tools

The piano hinge is screwed to the back of the box and then the lid is screwed on.

During the manufacturing process of the box you will need:

Wood planks - 4 pcs.
Plywood for the bottom of the box - 1 pc.
Chipboard for the box lid - 1 pc.
Side walls.
Plywood for back and front walls - 2 pcs.
Decorative overlays for the upper edges - 4 pcs.
Decorative overlays for the base - 4 pcs.

Instead of plywood blanks, where necessary, you can use chipboard. The main thing is to observe the dimensions of the parts. The measurements of the front and back walls should be 1.9 * 43.8 * 97.8 cm. The size of the side walls should be 1.9 * 43.8 * 45.7 cm. For the top edges and base should be used decorative overlays, having dimensions of 1.9*3.8*101.6 cm and 1.9*3.8*50.8 cm for every two types of drawer parts. The size of the planks will be 1.9 * 1.9 * 94.0 cm and 1.9 * 1.9 * 39.4 cm. The bottom and lid of the plywood box are provided with dimensions of 1.9 * 42.9 * 93.7 cm and 1.9*53.3*106.7 cm. The size of the protective corner pads should be 0.6*2.5*2.5*33.7 cm.

The following is required as fittings and fittings:

Finishing nails - 38 mm.
Finishing nails - 32 mm and 25 mm.
Piano hinge (90 cm length) - 1 pc.
Special holders - 2 pcs.
Handles for the lid - 2 pcs.

Among necessary tools The following types can be distinguished:

Roulette.
Jigsaw.
Screwdriver.
Corner.

All these types of tools should be prepared before carpentry work. For example, without a corner it will not be possible to correctly mark the places of cutting, as well as assembling a plywood box with your own hands. An important point The other thing is that it is better not to use a hacksaw to make the cut, but only a jigsaw.

Return to contents

Wall assembly

The finished box can be decorated with bright vinyl stickers.

Assembling a plywood box can be done in stages. Before making a toy box, you need to learn all the following basic steps, including points on:

manufacturing individual elements box;
selection of folds for the rear and front walls;
direct assembly process;
fastening decorative elements;
fastening the bottom and lid of the box.

First, all the walls of the product must be cut to the appropriate sizes. Next, you should select the folds of the walls according to the figure. When assembling the product, special glue is applied to them and they are attached to the side walls, strengthening each connection with 38 mm nails.

Using corner clamps, fixed in the upper corners, which are located diagonally, and similarly in the other two corners, but only in the lower ones, which occupy another diagonal on the opposite side, the product is given the shape of a rectangle.

When all the glue is completely dry, they begin to attach the decorative trim elements and corner trims. After this, chamfers are selected using milling machine, which is equipped with a chamfer cutter. A wood cutting machine can also be used for this purpose. Make a box with decorative finishing it is possible if you use a chamfer measuring 13 mm, located along the edges of the workpieces. The dimensions of decorative elements are taken equal to 2.5 * 5.1 and 2.5 * 7.6 cm.

When making a box from plywood, it is necessary to manufacture and fasten the upper decorative overlays from blanks measuring 2.5 * 5.1 cm, and their ends on both sides are beveled at an angle of 45 degrees. Each trim needs to be reinforced with the chamfer down, using glue or liquid nails on the upper walls of the edges of the plywood box. You should also use 32 mm nails.

To make and strengthen the decorative overlays from the bottom, you should carefully cut them out using 2.5 * 7.6 cm blanks. The whole process is similar to the previous one. It is necessary to install the overlays in the same way, following the direction of fastening of the chamfer, which should be facing upwards.

When making protective corner pads, you should cut them in the amount of 4 pieces for the drawer and secure them on its corners using glue and 25 mm nails. In order to subsequently attach the slats, the box must be turned upside down; the front and rear slats are securely attached flush using glue and 32 mm finishing nails. The side slats are also attached in the same way, that is, flush to the side walls with the lower edges.

Before attaching the bottom of the box, it should be cut together with the slats (4 pieces), paying attention to the size indicated in the list and description of all materials used. Then the box is turned upside down and glue is applied from above to the edges of the slats. The bottom is laid on the slats from the inside of the box, and then the product is left until the glue is completely dry.

You can often see a mess in a child's room, which is usually caused by scattered toys. An original, convenient and spacious handmade toy box will help you get rid of the clutter in your room.

Learn how to make a toy box with your own hands with minimal costs time and effort will help this instruction.

To make a toy box, you should prepare the following materials:

— 1 sheet of plywood measuring 425x600 mm, thickness 18 mm (part 1);

— 3 sheets of plywood measuring 350x490 mm, thickness 18 mm (part 2);

— 2 sheets of plywood measuring 350x350 mm, thickness 18 mm (part 3);

— 2 furniture handles;

— fastening loops;

— roller mechanism;

— quick-drying paint;

— screws 30 mm long;

- wood glue;

- acrylic paint;

First you need to prepare the box lid part. In the corners of part 1, using a compass, draw circles that have a radius of 3 cm. Using a jigsaw, cut out the curves, giving the part curvature in the corners.

Using sandpaper, you need to process the edges of part 1. Using a drill, make holes on the back and front walls of the box. Using screws, fasten the four walls of the product. It is required to fix the walls of the box perpendicular to each other with particular precision.