DIY super mousetrap. How to make a mousetrap with your own hands: rating of the best effective mousetraps

The appearance of mice in photographs and cartoons evokes affection. However, when gray tailed creatures penetrate a house, outbuildings, or garages, the attitude towards them changes dramatically. After all, rodents cause not only material damage, which includes damage to food, building materials, and electrical wiring. , helminths, which entails serious consequences for human health. Therefore, when rodents are discovered in your possessions, the issue of combating them is beyond doubt. How to make a mousetrap with your own hands and why this method is used most often - the answers to these questions will be useful to novice mouse fighters.

Advantages of mousetraps

The fastest way to get rid of rodents at home is the use of rodenticides, that is, poisons. But this method has a number of significant disadvantages. In addition to the fact that their use is dangerous when small children or pets live in the house, the death of a rodent can occur in the most unexpected places. A decomposing body will emit a disgusting cadaverous odor for a long time, which is very difficult to get rid of. And the search for the animal carcass itself may result in a major renovation of the premises. When using traps, these problems can be avoided.

And these are not all the advantages of mousetraps:

Even a schoolchild or a representative of the fair sex can make mouse traps with their own hands. After all, most designs in manufacturing do not require soldering skills, technical knowledge or professional use of a hammer and other tools.
Homemade mousetraps are in no way inferior to industrial versions in terms of efficiency.
The cost of devices made with your own hands can be several times lower than purchased traps, since most of them are made from improvised materials.

Types of traps

All mousetrap designs are a device in the center of which there is a trap that attracts tailed pests with its aroma. Depending on the type of device, the mouse either dies or continues to exist awaiting its fate. Types of mousetraps that you can make yourself:

spring, made of wood and metal spokes, act when the spring is triggered;
a variety of containers, ranging from all kinds of jars to a bucket or pan - the effect is achieved by shifting the center of gravity or simply dropping the mouse from a height;
live traps - an automatic trap designed by Tishleev, a Zünner trap are more complex designs for self-manufacturing; they can be either single-placed or designed to catch several individuals at once;
glue traps are a modern version of live traps, they are compact and easy to manufacture and further use; the capture of living creatures is carried out by gluing the rodent to;
electronic traps operating from the network or other power sources - a bait is placed inside the module, and as soon as the rodent is inside, a powerful electric discharge is released, from which the mouse instantly dies.

The photos of mousetraps presented below will help you appreciate the complexity of the design.

What to do with a caught rodent

The question often arises of what to do with a caught mouse. If the animal remains unharmed and uninjured, the most humane thing to do is to take the captive back to its natural habitat. If it is damaged, it is advisable to feed it to cats or take it to a landfill. Particularly compassionate individuals may first euthanize a mouse in an apartment or house before disposal, for example, by feeding it poison. If a decision is made to keep the gray pest as a pet, it should be taken for examination to a veterinary clinic and only after it is concluded that it is healthy, a new home should be arranged for it.

Whatever manipulations are performed with the captured animal, it is necessary to do it with gloves, since one cannot exclude the possibility that the mouse is a carrier of various diseases or is simply rabid. The room in which it was located must be thoroughly disinfected.

The forums also offer more creative options for solving the fate of a captive animal: feed and eat it, flush it down the toilet, place it with the mother-in-law.

How to make a bottle trap

The imagination of folk craftsmen goes to such lengths when it comes to plastic containers for liquid products. Catching rodents is not complete without them. A plastic bottle trap can be made in just a few minutes. You can make it from one and a half racks or 2-liter containers. In the absence of the latter, a mouse trap is constructed from a 5-liter bottle. There are several ways to make traps.

Option #1

The step by step guide is as follows:

Using a utility knife, cut off the neck of the plastic vessel, approximately a third.
Lubricate the cut neck from the inside with any vegetable oil.
Place bait inside the remaining part with the bottom.
Turn the element with the neck over so that it is directed downwards into the structure and secure it with tape or wire.

The mouse, seduced by the aroma of the bait, freely penetrates through the lubricated neck into the trap, but will not be able to get back out. On the part of the neck where the plug is screwed on, you can make several fan-shaped vertical cuts. This will increase the chances of catching a large rodent.

On a note!
To prevent a plastic bottle mousetrap from turning over, a weighting agent is placed on the bottom: stones, a small bag of sand.

Option No. 2

You can catch a mouse in a bottle even easier:

Cut off the top of the container where the narrowing ends.
On the upper edge of the element with the bottom, make cuts 4-5 cm long at intervals of 1.5-2 cm. You will get something like petals that need to be sharpened.
Bend the pointed edges down so that they look at the bottom.
Grease the walls of the trap and place bait on the bottom.

For the convenience of the mouse, small boards are attached to the device. The animal will climb up them without hindrance, get into the vessel, and sharp edges and slippery walls will not allow it to leave.

On a note!
A primitive trap can be easily made by placing bait in a bottle of oil after using the product, slightly cutting off the neck and bending it down.

Option No. 3

This type of trap is slightly different from the previous ones:

Cut off the neck of the bottle and throw it away. This part will no longer be needed.
In the resulting container, you need to drill two holes and stretch a rope or wire through them, through which the mousetrap will be tied.
Place the bait on the bottom and position the trap so that part of it hangs from the shelf or countertop. Secure the fastening.

As soon as the mouse gets behind the treat, the center of gravity will shift, and the mousetrap will invariably hang with the captive. Catching pests using bottles is quite convenient. The consumables for their manufacture cost nothing, and caught animals can be disposed of along with the trap, which avoids direct contact with them.

Traps from large containers

A mousetrap made from a bucket of water is an outrageously simple but very effective device. With its help, it is possible to catch several representatives of the mouse family in one night. The process of making a mousetrap:

Drill two holes in the top of the bucket.
Take a metal rod, the length of which is no less than the diameter of the bucket.
Place an empty bottle on the axle, having previously coated it with a mixture that is attractive to rodents, so that it can rotate.
Fix the rod with the bottle strung in the drilled holes. The neck should be as close as possible to the edge of the bucket.
Fill the bucket one-third full with plain water.
Attach a kind of ramp made of a board to the trap, along which the mouse will climb to get the bait.

Having felt the aroma, the tailed animal will climb along the bridge to the bottle, which, under its weight, will immediately turn over and throw it into the water. Instead of a bucket, a deep basin or large pan can be used.

The device is designed to catch several individuals at once. The construction process consists of several stages:

Take a wooden beam about 40 cm long. Drill 6 holes at the end with a diameter of 2-2.5 cm and a depth of at least 1-2 cm. These will be holes for potential captives.
At a distance of 1 cm on the same side, saw the block lengthwise to the bottom of the notches.
Drill 2 more holes perpendicular to the holes, into which the springs will then be attached.
Build a spring mechanism from a knitting needle, and at the end make a loop of strong thin wire.
Insert the free edge of the spring into the previously prepared hole, secure it to the block, and hide the loop in the cut.
Pass the thread through the free holes.
Place bait in the center.

The mouse will try to get to the treat and gnaw the thread, as a result of which the spring mechanism will work, and the rodent will end up in the hole prepared for it.

Adhesive structures

To make a mousetrap, you will need small cardboard squares, sheets, each side at least 5 cm. Construction residues can be used for the base - plasterboard, MDF panels, fiberboard, chipboard. The second necessary component is glue. You can prepare it with your own hands according to the following recipe: mix rosin, petroleum jelly, pine resin and bitumen pitch. If you don’t want to prepare the glue mass yourself, then the easiest way is to purchase special glue for rodents in a specialized department.

The further construction of the trap is outrageously simple. Glue is applied pointwise to the workpiece. A fragrant bait is placed in the center. The mouse is firmly fixed to the adhesive mass. The only drawback of such structures is the heart-rending squeak of a caught pest.

To or, they often use a mousetrap house. A cardboard frame is made. The interior walls are covered and in the middle is a traditional treat for mice. This design eliminates the risk of an animal smeared with glue moving around the room.

Electronic devices

A do-it-yourself electronic mousetrap can be made according to several schemes. For people with technical education and knowledge of the laws of physics, making such a device will not be difficult. The simplest trap is a small device with a fragrant treat placed in the center. When a mouse gets inside, the resistance of the circuit changes, causing the damper to close and an audible signal to sound, warning that the pest has been caught.

Mice live in residential buildings, cafes and shops all year round, but they become especially noticeable as cold weather approaches. Species that live close to humans, but not side by side with them, can migrate closer to warmth and a source of easily obtained food.

Mice cause more damage to human households than rats. Although the latter are less acceptable to people, they are less likely to live directly in residential areas, preferring to be located in waste collection and disposal areas. In addition, mice can reproduce up to ten times a year. Most often, they bother people not because they eat a lot, but because they are omnivorous. Mice chew food, but do not finish it, after which the product has to be thrown away. They gnaw holes in clothes and furniture, build passages through partitions and walls, and leave droppings everywhere. Mice are especially dangerous for electrical wiring. They can try to chew through it, expose the wires and short-circuit them, after which fires sometimes occur. Mice are carriers of salmonellosis and other intestinal and inflammatory infections.

How to catch a mouse

To catch a mouse in an apartment in a trap, you need to understand where and where the rodent comes from.

Unlike rats, mice search for food only at a distance of 10-25 meters from their habitat. Traps should be placed in areas where mice are most likely to appear. Mice prefer to travel along walls and other vertical structures. Mice are very inquisitive and explore every new object placed in their feeding territory. If the mouse cannot be caught immediately, the device can be moved to another location, writes Michael F. Potter, a specialist at the University of Kentucky College of Agriculture.

Mice eat grains and seeds, nuts, oils and sweets. Mice are nocturnal animals, and during the dark time of day they are able to go out in search of food up to 30 times. They leave behind them a black oblong droppings 0.3-1.2 cm long, thanks to which their recent appearance is easily disavowed.

But before you start arranging, it is better to first spend time preventing rodents from appearing in unwanted places. Cracks and holes larger than a quarter inch wide should be repaired. Weak points: holes for water pipes in the wall and the gap under the door. To make the room less attractive, you need to keep it clean: remove leftover food. After this, basic measures, if necessary, can be supplemented with the placement of special anti-mouse products.

What is better: baiting, scaring or catching?

There are four main ways to combat mice:

poisonous baits - rodenticides;
ultrasonic rodent repellers;
mousetraps (killer and live traps);
sticky traps.

They are located as close as possible to the mouse’s habitat.

Rodenticides most often created on the basis of seeds or grains. They are sold in pharmacies and contain brodifacoum, chlorophacinone, diphacinone or warfarin as active ingredients. These substances prevent blood clotting, causing the animal to die from internal blood loss. Carefully: Keep these mouse repellents away from children and pets.

Ultrasonic repellers are humane for animals and safe for you. Some models, like the budget domestic "ElectroCat Turbo", in addition to ultrasound, also affect rodents using sound signals and flashes of light. This combination is much more effective - mice will definitely not have the desire to stay in the vicinity of such an aggressive stimulus. In the first days of using the repeller, you may notice an even larger number of rodents than before - but this is normal. The fact is that the sudden appearance of ultrasound causes panic in rodents - as a result of which abnormal daytime activity and chaotic dashes around the house may appear. Typically, the rodents will be gone within two weeks.

When there are few mice in the house, you should also try to catch them in mousetraps. These traps should also be kept away from pets and children. A mousetrap has an undeniable advantage over poisonous bait. The mouse will be immediately removed from the house, while the poisoned and dead mouse will remain lying somewhere, for example, in the cavity of the wall and floor and emitting an unpleasant odor. Traps are placed along walls where mice or traces of their activity have been observed. The trap rotates perpendicular to the wall, but some instructions recommend placing it parallel. Besides the murderous ones, there are also live traps, which allow a caught mouse to be released without harming it.

Sticky traps are also effective against mice, as opposed to heavier and stronger rats. Running along a familiar path, the mouse suddenly finds itself on a sticky plane, from where it can no longer escape. If the trap accidentally sticks to a person or pet, it can be removed with vegetable oil.

All traps should be checked daily for dead mice. Perform all work wearing gloves.

Which mousetrap is better? How They Work: An Overview of Trap Types

Behind a large number of designs and manufacturers, there are only four types of mouse traps, and we will now analyze them.

Ordinary mousetraps. The simplest type of trap that is familiar to us from childhood or from cartoons. The cheapest option is a classic wooden mousetrap with an iron bracket. The bait is pinned onto the “fishing rod”, and the mouse comes to it. As soon as she tries to take the food with her, the bracket will slam shut and pin her down. The mechanism is quite strong and can kill an animal or injure a person who handles it carelessly.

In addition to wooden ones, they now produce plastic and metal ones, which in appearance may differ significantly from the classic model, but retain the same principle.

“Live” traps. This trap does not kill the rodent, but only keeps it in a small enclosure. Suitable for those for whom killing an animal, even a pest, is unacceptable. A caught mouse is simply released away from the house. In addition, this way you can show it to children and teach them humanism by your own example.

Glue traps for mice. They effectively solve the question: how to catch a mouse without a mousetrap. They are boards, trays or slats with glue. They are effective at holding a mouse, although they are unlikely to hold a rat for long. Their disadvantage is action. A mouse caught in the glue, trying to get out, begins to twitch violently and squeak, creating noise. The glue is non-poisonous and will not kill the rodent, but if a mouse gets into the trap at night, you will have to get up and do something about it, because it will be difficult to fall asleep while listening to the squeaking.

Electronic mouse traps. The most effective trap was invented relatively recently. The advantages of an electronic device are obvious: a mouse or rat runs into a trap in search of food and receives an electric shock, dying quickly and painlessly. Perfectly solves the problem: how to catch a mouse in the house without blood and chaos. In addition, electronic traps are convenient and practical for large premises and food warehouses, as they can be used for a long time without recharging.

Mousetrap type	Advantages	Flaws
Common mousetrap	very cheap	doesn't kill quickly
“Live” trap (live trap)	cheap and don't kill	you need to take it away and release the mouse
Glue trap	cheap	the mouse may squeak and scurry around for several days
	kill quickly with an electric discharge, without blood or dirt, the charge is enough for a hundred electric shocks	dears, do not use outdoors without special protection from water

What are the differences between mouse and rat traps?

Rats are heavier, stronger and smarter than mice. Therefore, regular or sticky traps that are suitable for catching mice are not suitable for them. They can work together to steal bait from a mechanical trap.

Glue traps can catch a mouse or young rat. Mature rodents from among the latter will be able to get out of it within one or two hours.

At the same time, if there are no problems with rats in a small apartment, but there are mice, there is no point in buying an expensive electronic trap, which undoubtedly has important advantages (we will talk about them below), but is designed for long-term use with a large number of charges and not particularly needed where you need to catch 2-3 rodents.

Mousetrap bait or how to lure a mouse

Domestic rodents prefer grains and cereals, as well as nuts. But scientists from the University of Kentucky note the diversity of the diet of domestic rodents, in which grains are only the basis:

Mice eat a wide variety of foods, but prefer seeds and grains. They also like foods high in fat and protein, such as nuts, bacon, butter and sweets (an important point to remember when choosing bait to rig your trap). Mice can make 20-30 forays per night.

A popular bait among mousetrap users is peanut butter bait, which is convenient to use due to its consistency, making small balls or spreading it on the touch surface of the mousetrap. Contrary to popular myth, they are not crazy about cheese and eat it along with other foods. Therefore, cheese is not always a good bait.

As the aforementioned Michael F. Potter joked, you have to think like a mouse. Better use smoked lard or bacon. In addition to peanut oil, unrefined sunflower oil is suitable. You can moisten a piece of white bread with it. Or simply put roasted sunflower seeds or peanut kernels in a mousetrap.

Top 6 mouse traps

Steel mousetrap "FIT"

The most classic version of a mousetrap: a wooden base with a durable steel mechanism. It has maximum sensitivity, making it impossible to steal the bait - it slams instantly! These are the traps that are most popular among the people: they are cheap (2 FIT traps cost only 69 rubles) and they always work flawlessly.

But they also have their obvious disadvantages. So, this is not the fastest and most gentle option for killing: the mouse may not die immediately, but suffer from pain for several hours. The tree also absorbs the smell of dead animals, so after a while the mice will understand the catch and won’t climb into it again - it will have to be replaced with another one. But such devices are so budget-friendly that buying a new one is not a problem. The main thing is that they work and have been tested by millions of people.

Plastic mousetrap "Mr.Mouse".

Another variation of the classic mousetrap with an improved design of the bait area. It is made of plastic, which does not get dirty, unlike wood, and does not absorb odors. Therefore, the mousetrap can be used many times without fear that it will start to smell like dead rodents. It is also safer than steel traps because... works on the principle of a large clothespin - your fingers will be intact. Contrary to popular belief, mice don't like cheese that much, so use seeds, peanuts, chocolate, or dry pet food as bait. Users write -

Mr. The Mouse is very easy to use, it’s extremely easy to take out the mice, and you don’t have to worry about leaving your fingers there - I recommend it to everyone.

Price - about 80 rubles.

Glue trap “Rodent”

A simple and inexpensive option for those who need to catch a small number of rodents. According to the manufacturer, the trap is designed to catch gray and black rats, house mice, gerbils, bank voles and moles. The sticky base is non-toxic and, in addition to glue, contains rosin, rubber and mineral oils. But it is more likely for mice - such a surface is unlikely to hold large rats. Keep in mind that if mice get stuck in the adhesive, they may try to get out by tearing off their limbs. The sight is not a pleasant one, so it is better to check them more often and finish off the rodents or release them to freedom. This costs from 100 rubles.

Mouse trap “House”

This is a humane option for trapping: the trap does not kill mice, but simply locks them inside - the rodents have no chance of getting out. This “House” looks like a plastic tube, bent at a certain angle, and two doors. Before starting work, you need to remove the back cover and put the mice’s favorite treat - peanuts, seeds or dry animal food - into the far part of the device. Then place it on a flat surface, close the back cover and open the front door - especially for the rodent. When he crawls towards the bait, the “House” will automatically slam shut.

Don't forget to check such traps in a timely manner so that the mouse does not die inside! Release it and put in a new portion of bait, then install it again. The method is not only humane, but also affordable: for ~250 rubles. you can purchase 4 “Houses” at once.

Electronic mouse and rat exterminator "EcoSniper GH-190 Rat Killer"

“EcoSniper” is an example of the fastest way to get rid of rodents: it kills mice with an electric shock in five seconds. This electronic trap can operate either from mains or batteries. The trap design ensures the safety of children and pets. It can be used to catch any rodents in the house, garage or any other room. If you use batteries, you can even set this up outdoors - as long as you keep the trap protected from water. But such powerful devices also cost much more than conventional ones - from 3,000 rubles.

Live trap “Cage”

This cage trap is made of galvanized steel and has a wooden bottom. It is safe for children and animals, including mice themselves, and is suitable for those who do not want to kill animals, even harmful ones. Once in the trap cage, the mouse remains locked in it, but unharmed. A caught rodent simply needs to be released into the wild by opening the door away from your home. Some people prefer to place poison inside the trap, but we do not recommend this - it is better to simply catch and release the animal. The compact size of the cage allows you to use it anywhere - on the street or in the house. Such a device costs from 350 rubles.

Product	Type	Operating principle	Price
Steel mousetrap "FIT"	regular	Slams on the mouse's body	~69 rub. (2 pieces)
Plastic mousetrap "Mr.Mouse".	regular	Slams on the mouse's body	~80 rub.
Glue trap “Rodent”	sticky (adhesive)	Rodent gets stuck in sticky layer	from 100 rub.
Mouse trap “House”	live trap		~250 rub. (4 pieces)
Electronic trap "EcoSniper GH-190 Rat Killer"	electronic	Electrocutes a mouse	~3000 rub.
Live trap “Cage”	live trap	The rodent falls into the trap unharmed	from 350 rub.

Mice occupying a house is an unexpected and very unpleasant phenomenon. There are many ways to get rid of rodents, the easiest option is to go to the store for a mousetrap.

It’s a little easier for home craftsmen -DIY mousetrapwill serve no worse than store-bought.

In contact with

The main advantages of homemade mousetraps

One of the main advantages of homemade mousetraps is that they will cost almost free, because the construction will be made using affordable materials that can be found in any home. Resourceful rodents quickly realize that clever traps are dangerous and try to avoid them, despite the attractive bait.

One more advantage of homemade mousetraps can be highlighted. You can alternate designs, deceiving uninvited “tenants”.

Unlike poisonous drugs, the use of mousetraps rarely leads to the death of rodents, which will certainly please humane owners - after catching, all that remains is to take the enemy away from home and release it.

The last advantage of using a homemade product is that it is completely safe for the occupants of the premises and will not harm even children.

Types of homemade mousetraps

Home craftsmen have learned to makeDIY mouse trapsfrom the simplest materials, showing considerable ingenuity. Most often, structures for catching rodents are made from the following improvised means:

plastic packaging;
an ordinary bucket;
cardboard;
bottles;
metal or wood;
pots.

Two other great options that can be made with a little experience are the abyss mousetrap and the electronic trap. All types of mousetraps have their own characteristics and subtleties, if desired, you can make your own amendments - the trap will not suffer at all from this.

How a homemade mousetrap works

Most traps made to fight mice act as traps - the rodent will just get inside, but will not be able to get out.

If you are determined to completely cleanse your home of pests, you will have to abandon humanity and destroy the mice after they are caught.

There is a version of traps made using containers of water - the rodent falls into the liquid and drowns. If the mouse family has grown to alarming proportions, in the morning you can find several representatives of the tailed colony in the ingenious structure.

Even the most effective mousetrapmay turn out to be completely useless if the rodent is not lured.

If you do not prepare a treat that is attractive to pests, most likely, the trap will turn into a useless element of the interior - a mouse can only be caught by accident, looking into the manufactured structure out of curiosity.

Choosing bait - what to treat rodents with

When asked whatmouse bait in a mousetrapsuits best, most inexperienced owners of a rodent-infested apartment will confidently scream - “Cheese!”... and this is the wrong answer! Only in jokes and fairy tales are rodents tempted by dairy products; in fact, they are attracted to completely different delicacies.

You can try to lure mice with the following treat:

salted or smoked lard (the most successful option, almost fail-safe);
a piece of bread soaked in vegetable oil (sesame oil is especially attractive to mice);
any baked goods;
grain crops (for greater effect, grains can be treated with toxic substances - even if the rodent manages not to fall into the trap, it will probably die after the meal);
fresh or boiled meat (if you don’t have meat, you can use sausage, but you shouldn’t count on the effectiveness of the bait - a product with suspicious ingredients will not cause much delight in mice).

Pumpkin seeds are very popular for catching rodents, but you should first dry them thoroughly.

A plastic bottle is an excellent material for a trap.

About, how to make a simple mousetrapfrom a bottle, you can write an entire dissertation - folk craftsmen manage to create incredible designs, leaving no chance for rodents. This material can be found in any home, which makes the mousetrap even more attractive - there is no need to go to the store for the necessary parts.

Option 1

To make a simple device, you only need a bottle (if there is a large concentration of rodents, you can make several traps, so you will need 3-5 bottles), a strong thread (at least half a meter) and a sharp knife.An obligatory element of the trap is a fragrant bait.

Making a mousetrapIt only takes a few minutes:

Cut off the neck (a rodent should be able to easily enter the bottle).
Make a puncture at a distance of 0.5–1 cm from the cut.
Pull the thread through the puncture.
Place the trap on the table (you can use another piece of furniture for this), most of the bottle should be located outside the tabletop.
Secure the thread to a nail.
Place treats for mice inside the bottle.

You can safely go to bed - after the rodent sneaks into the bottle, tempted by the appetizing smell, the trap will fall off the table and remain hanging, the mouse will not be able to get out of there.

Scheme of a mousetrap made from a plastic bottle.

Attention! Such reusable mousetrap– after catching a pest, you just need to get your enemy, show him who’s boss (or drive him out of the house in shame), put fresh bait and send the trap back to the table, wait for the next victim.

Option 2

Homemade mouse trapsmay have a very simple design, but nevertheless conscientiously cope with the task. To make it you only need a sharp knife and a plastic bottle.

Cut off the tapering part of the plastic container, and turn the remaining half into a kind of “flower”, cutting out the sharp petals. All that remains is to bend them inside and put a treat for the pests. The aroma of bread or smoked meats will certainly attract a mouse into the trap, but the malicious pest will not be able to get out of it - the sharp edges of the bottle will stop all attempts to get out.

Bucket of water to catch mice

You can catch an annoying mouse with the help of an ordinary bucket, and it is not necessary to take a large one, the main thing is that the container must be filled with water. Rodents can swim, but they are unlikely to be able to get out on smooth walls. You can use a little trick here - lubricate the walls with oil, the slippery surface will not leave a single chance of escape.

Option 1

To make the design you will need:

a bucket half filled with water;
metal rod (length must correspond to the diameter of the container);
plastic bottle (can be replaced with a beer can);
bait.

Make a small hole in the bottom of the bottle (the container should rotate easily on the rod). Place the container on the rod and secure it at the top of the bucket. Carefully place the bait on the surface of the bottle.

All that remains is to make it easier for rodents to have unhindered access to the bucket (you can put a bar on it, along which the mouse will climb to the edge of the container).

How does a mousetrap work?? The mouse climbs to the edge of the bucket, makes its way along the rod to the bottle, and at the first attempt to get close to the treat, it turns along with the container, going into free swimming.

Water mouse trapcan be turned into a weapon of mass extermination of rodents by placing a treat around the bottle - the pests will climb on it in a continuous stream.

Option 2

If you don’t have time to make complex structures, and you need to catch the mouse immediately, a thin strip of flexible plastic and a bucket of water will come to the rescue. It is better not to use cardboard here - it will not bend under the weight of the mouse.

Mousetrap device:

Secure one end of the plastic strip to the edge of the container.
Place bait on the other end of the strip.
Fill the bucket with water (at least a third of the volume).
Making its way to the treat, the rodent will certainly find itself in a trap - the plastic strip will definitely bend under its weight.

The bucket can be replaced with any suitable container, the main thing is that it must be wide and deep enough so that the mouse cannot get out.

The secrets ofhow to make a mousetrap at homemade of wood, there are quite a few.

The simplest option is a regular spring trap, into which a rodent can easily penetrate and die. To make it you need a small block with smooth surfaces, a drill, wire and thread.

Stages of work step by step:

Make a round hole along the axis of the block (use a drill of about 30 mm), and the loophole should be blind.
Stepping back 1-2 cm from the edge of the block, make two side through holes (diameter up to 4 mm), connect them with a cut inside the hole. You can do this with a sharp mounting knife.
Insert the wire into the through holes; it should fit exactly into the prepared cut and protrude a few centimeters above the block.
Prepare the spring - wind the wire around a pencil or pen. Secure one end to a block, and thread the other through a wire loop.
At a distance of 4–5 cm from the edge of the hole, drill two holes, insert a thread into them, compress the spring and tighten a strong knot from above.

The final stage is to place bait and send the trap to places where mice like to hang out. To get to the treat, you will have to chew the thread, and the wire, under the influence of the spring, will turn into a noose, which will certainly strangle the rodent.

The advantages of a glass jar trap are that it takes almost a minute to make.Simple mousetraphas a small drawback - the container is easy to break, you will have to collect the fragments and make another trap.

In addition to the jar, you will need a tin lid, a knife and a piece of smoked lard.

Roll up the jar, cut the lid with a sharp knife (like a cake, from the center to the edges). Bend the tin “petals” into the container and place bait on the bottom.

You can place a wooden “ladder” at the edge of the container to make it easier for mice to access the treat.It is easy for rodents to get into the trap, but they will not be able to return to the hole - the sharp edges will block access to freedom.

Electronic mousetrap for home craftsmen

To make an electronic trap, you will need a little knowledge and experience in electromechanics, otherwise it is not recommended to take on such designs. To make a trap you will need a core from an old soldering iron or electromagnet, a small cage and a little resourcefulness.

In the bottom of the cage, cut a small groove into which to place two bare wires (crosswise, but so that they do not lightly touch each other), cover them with a chipboard board adjusted to the size of the hole.

It is better to install the stove on hinges (you can make them from an old tin lid).The floor should appear to be perfectly level so as not to alert the mouse.

Lead the wires from under the floor (already with insulation) to the door, near which install the core from the electromagnet. All that remains is to attach a “pin” made of wire to the raised door, the other end of which is attached to the valve stem and put the bait. When the mouse steps on the floor, it lowers, connecting the exposed wires. The contacts close immediately, the electromagnet rod retracts and slams the door.

Attention!It is recommended to undertake the manufacture of electronic traps only if you have the necessary knowledge. If they are not there, in order to avoid serious consequences, it is better to use simpler devices for catching mice.

Glue traps against rodents

Glue traps against rodents, which do not require special preparation or force, are quite popular. All you need is to buy a special glue that will catchmouse and mousetrapalmost ready.

You need to pour glue into a small tray (its main advantage is that it does not dry for a long time, but holds its victim securely). Place a piece of bread in the center of the container and place the trap under the refrigerator or behind the kitchen cabinet.

A mouse tempted by the delicious smell will certainly try to get to the treat and end up in sticky captivity. All that remains is to pour a little oil near the rodent to free it and do as you please

Mousetrap designsYou can even come up with it yourself; you don’t need any special skills or imagination for this. All methods are good in the fight against rodents, the main thing is to make them disappear from your home. You shouldn’t wait until the family of mice grows to incredible sizes - a timely declaration of war on pests will save food from voracious “tenants.”

Good afternoon dear friends! A couple of years ago, there was some kind of mouse invasion. My parents live in their own house and no longer knew how to escape from them. At this time we just came to visit them and found them struggling.

Mom decided that store-bought traps would be much more effective than homemade ones. But in practice it turned out that not everything is so rosy. The quality of the purchased mousetraps wanted to be the best. And as soon as dad wanted to put the bait, the clamp broke off and he had to take a new one.

We couldn’t stand aside and advised them to use old methods and built homemade traps from scrap materials. And to the surprise of the parents, the effect was amazing. In this article you will learn: how to make a mousetrap with your own hands, what to use for this, basic tips for making it.

How to make a mousetrap with your own hands - quickly and efficiently

If you have rodents in your house, it is not at all necessary to immediately start poisoning them with poison - a good, safe and inexpensive solution would be to make your own mousetrap. You can, of course, resort to the help of classic mousetraps, which are sold in hardware stores, but this solution has one serious drawback.

It lies in the fact that if there is more than one mouse (as is the case in most cases), you will have to buy several of them, and even then it is far from certain that their number will be enough.

In addition, after catching a rodent, such mousetraps need to be “recharged” each time, that is, leaving them in a country house for a whole week, hoping that with their help all the mice will be caught, will not work.

This material will offer options for mousetraps that you can make with your own hands from available materials, and some of them do not need to be “recharged” - they will always be in combat readiness.

Type one - reusable mousetrap

There are a great many options for mousetraps that use gravity to recharge, but we will look at the most popular and effective of them. In the first case, you will need a bucket or deep basin, a plastic bottle (as a rule, 0.5 or 1 liter bottles are best), scissors, an awl, processed cheese and a thin metal (or wooden) rod that will serve as an axis.

The length of the rod should be the same as the upper diameter of the basin or bucket, and the length of the bottle should be less. In addition, we will need a flat board along which the mouse will climb into our mousetrap. So, take a bottle (it should have a cap) and, using an awl and scissors, make two holes in it opposite each other.

The first should be clearly in the middle of the bottom of the bottle, the second - in the middle of the cap. The diameter of the hole should approximately correspond to the diameter of the rod that you took as the axis.

We thread our axle through the bottle and place it on top of the basin. If you don’t mind your bucket or basin, and also in order to make the trap more effective and reliable, you can try to make two small pins in its upper part (opposite each other), into which you place the edges of the axle - this way the structure will become much stronger.

Make sure that the axis rotates freely in the pins - this is the main criterion for the effectiveness of our mousetrap. The bottle must be moved on an axis so that its neck is as close as possible to the edge of the basin, and a board must be installed in this place so that the place where it rests on the basin is near the bottle cap.

The angle of the board in relation to the floor should not exceed 45 degrees, otherwise it will be very difficult for the mouse to climb on it, and it will go to look for a treat in another place - for example, in your bedside tables.

As you can see, such a mousetrap will work until the processed cheese completely deteriorates, no longer attracting new mice. If everything is done correctly, leaving this structure for three or four days, you can be pretty surprised at the number of animals swimming in the basin. The second version of the mousetrap resembles the first in many ways, with the exception of some details. To construct it, we will need the same basin, as well as a board.

In addition, you will need a second board (platform), but of a shorter length (15 centimeters), a hinge, a bait and a weight. To better understand how to assemble such a mousetrap, it is better to immediately explain the principle of its operation.

The platform lies at the end of a long board, but not with its entire plane, but only halfway. The part that comes into contact with the long board is weighted with a weight (the weight of the weight should be slightly less than the weight of the mouse). The boards are connected by a hinge so that if the short one is rotated, it returns to its original position under the influence of the load.

The neck of a three-liter jar is wrapped in paper, which is secured along the edge with an elastic band or wire. On the stretched part of the paper, make crosswise cuts across the entire diameter of the neck of the jar. Make sure that the paper does not wrinkle too much, creating a feeling of being intact.

We place this structure, for example, under a chair, from which we hang the bait on a string. The bait itself should hang clearly above the cut paper, two centimeters from its surface. We attach a board (ramp) to the can, along which the mouse will climb onto it.

As you already understand, the cut paper will not support the weight of the mouse on it, throwing it to the bottom of the jar. It should be noted that this DIY mousetrap is the most ineffective of the three described.

Rodents do not always want to stand on the cut paper, apparently sensing some kind of catch in it. In addition to a three-liter bottle, you can use any other container, as long as the sheet of paper completely covers it.

Type two - disposable mousetrap

If you are sure that there is only one rodent terrorizing you and your loved ones, you can design a disposable trap, which, after being triggered, must be installed again. As a rule, traps of this type are simpler, and therefore take less time to assemble.

All we need is a plastic bottle with a volume of at least one and a half liters, as well as scissors, strong thread (it is better to use nylon thread) and, of course, bait. Using scissors, cut off the top of the bottle. It is better to make the cut in the place where the shape of the bottle begins to narrow towards the neck.

We make a hole somewhere near the cut edge and tie the edge of a nylon thread.

We are looking for a place to install a trap - if you are sure that a rodent can reach the surface of your table, it is better to choose it. We throw the bait at the bottom of the bottle and place it on the table so that the closed bottom, where the bait lies, hangs over the edge of the table.

The second end of the string needs to be tied to something, and its length is calculated so that when the bottle falls from the table, it remains hanging on the string without reaching the floor. That's it, the trap is ready. The mouse will climb into the bottle and try to take the bait, but the bottle will tip down, catching the animal.

It may also be advisable to place the bottle on a thin piece of fabric - this will reduce slipping and make it easier for the mouse to get inside the trap.

Here is another version of a mousetrap, using the same plastic bottle (I wonder if the creators of such bottles guessed that their invention would serve as the main part of the design for almost all homemade mousetraps?).

We cut the bottle in a ratio of approximately two to three, the longer side should be the one where the bottom is located. Turn the top over and tuck it into the inside. The cut edges should be at the same level - you can either glue them together, or pierce them with an awl and thread the wire.

We generously coat the tapering part of the neck with oil, and throw a piece of bait into the neck itself, at the bottom of the bottle. Such a trap is installed next to a shelf or chair from which the mouse would have access to it.

As you can see, the design of such a mousetrap is also quite simple, and you can make it in literally 10 minutes. In conclusion, let's talk about the simplest type of do-it-yourself mousetraps, the design of which you have probably seen in various cartoons.

It consists of a container with a depth of about 10 - 15 centimeters, as well as a support on which a piece of cheese is fixed. You can use any metal or wooden rod as a support - this is not at all important here.

You can simply stick the cheese onto the support, or you can thread the rod through it.

If the structure is not sufficiently stable, you can make two supports, fastening them in the middle with the same cheese. The mouse, trying to pull out the cheese, will break the support, after which the bowl (or whatever you use as a container) will fall down, thereby slamming the exit.

Now you are prepared, the mousetrap has been assembled with your own hands, and you are ready to engage in battle with the annoying rodents. Here are some more tips for catching mice:

As bait, in addition to cheese, you can use corn flour, peanut butter, a cube of bread dipped in unrefined sunflower oil.
To avoid unpleasant odors, do not leave a mousetrap (especially a reusable one) unattended for more than a week.

Source: "miremonta.ru"

Homemade mouse traps

In the fight against mice, one of the usual and quite effective means are mousetraps. You can either buy factory mousetraps or make your own mousetraps.

In the latter case, you can save money, as well as gain experience in making such structures and practice making something yourself. Below we will describe various ways to make a mousetrap at home.

Mousetraps made from plastic bottles

The homemade mousetraps described below are easy to make, since plastic bottles are ubiquitous and very easy to handle.

Design number one

Take a plastic bottle and cut off the neck.
At a distance of about a centimeter from the cut, pierce a hole and pass the end of a strong thread about half a meter long into it.
Then put bait in the bottle, and place the bottle, for example, on the edge of the table.
In this case, the bait should be located near the bottom of the bottle, and this part should hang over the edge of the table. That is, the “top” of the bottle should have support, but the “bottom” should not.
Fix the thread on the table, for example, tie it to a nail.
When the mouse reaches into the bottle, the bottle will tip over.
The mouse will remain in the bottle, and the bottle will hang on a thread.
After this, you can take out the mouse and kill it, and the mousetrap will be ready for use again.
Of course, it is not necessary to place this mousetrap on the table - any similar design will do.

Design number two

Take a bottle, cut off half, then cut out sharp petals on it and bend them inward.
Place bait inside and place the mousetrap in a convenient place.
The mouse will get inside quite freely, but will not be able to get out.

Design number three

Take a bottle and cut off the top part of it.
Cut the neck so that the mouse can fit freely into the resulting hole.

Place the bait in the lower part, and insert the upper part with the neck down. Position the structure so that the mouse can easily climb up. When she climbs into the bottle, she will fall down and will not be able to get out.

Bucket mousetrap

Take a bucket and insert a metal rod into the top.
Place a 0.33 or 0.5 liter tin can on it lengthwise - for example, a beer can, or a plastic bottle.
The jar (bottle) should rotate quite freely on the rod. Place bait on it.
Place the bucket so that the mouse can reach the jar, and fill it with water to half or less.
When the mouse smells the bait, it will climb onto the bottle. The jar (bottle) will turn over and the mouse will fall into the bucket.
If you are using a jar, then it is important to select the distance between the edge of the bucket and the edge of the jar so that the mouse cannot step on the jar, but can jump; if it’s a bottle, position it so that the mouse first hits the neck of the bottle.
If you want to make a weapon for the mass destruction of rodents, place the bait in a ring around the bottle, and the mice will climb on it continuously.

The main thing is that there is enough bucket.

Option number two - simply attach a strip cut from a plastic bottle to the edge of the bucket and place the bait on it. The strip will bend under the weight of the mouse, and the mouse will fall into the bucket.

Glass jar trap

Take a jar and seal it with a tin lid.
Cut the lid like cutting a cake. Place bait on the bottom - for example, a piece of lard.
The mouse will climb into the jar, but will not be able to get back out - the sharp teeth will interfere with it.
Instead of a lid, you can seal the neck of the jar with paper and cut it crosswise - it will create imaginary rigidity, but the teeth will diverge under the weight of the mouse.
As you can see, making a mousetrap with your own hands is quite simple, and does not require the use of special materials or costs.

We hope that the presented mousetrap options will help you get rid of rodents. Of course, these are not all possible design models - there are also more complex and effective mousetraps.

For example, some people make various electronic mousetraps on their own, but this topic is beyond the scope of this article, while the designs described above are time-tested and very easy to manufacture.
Source: "noguests.com"

We catch rodents in simple ways

A mouse trap will help you get rid of unpleasant and sometimes dangerous rodents - it’s easy to make a device with your own hands that is no less effective than commercially available models. Making mousetraps yourself from scrap materials will save money, because most often, several devices are required simultaneously to eliminate pests.

Based on the descriptions given, you can choose the most effective and simple to implement designs. If the use of toxic substances to control rodents is undesirable due to the presence of children or pets in the house or dacha, and buying several traps in the store seems too expensive, it’s time to learn how to make a mousetrap yourself.

For production you will need simple materials that are always available in everyday use - paper, various containers (you can often use empty unnecessary containers), wire, ruler, etc.

Please note: most self-made traps are reusable or self-charging, which allows you not to constantly monitor them and catch several rodents with one device, leaving the trap unattended while you leave (optimally - no more than a week, so that an unpleasant odor does not appear.

In order for pest hunting to be successful, it is not enough to know how to make a mouse trap. It is also important to “convince” the rodents to show interest in this trap, which means an attractive bait will be required.

There is a common stereotype - mice love cheese.

Animals really like this product, but sunflower seeds, lightly fried sunflower oil or a piece of bread dipped in it will be more effective as bait. Sesame oil is a win-win option - its aroma does not leave mice indifferent, and you can also use a piece of lard.

We use a bucket and ruler

This trap model is suitable for those who prefer the simplest but most effective solutions and prefer clear instructions, including how to make a mousetrap with your own hands. Another advantage of such a trap is the interchangeability of its elements - instead of a bucket, you can take an old saucepan or plastic container, and the ruler can be replaced with any suitable sized strip or strip of thick cardboard.

In addition to the ruler, you will need a knitting needle or a rigid, round metal wire. The knitting needle is glued to the ruler perpendicularly and serves as a support - it is laid so that both ends rest on the edges of the bucket. A strip or ruler glued to the knitting needle should rest on the edge of the bucket with one end and hang over it with the other.

It is at the overhanging end that the bait is placed. The trap is located in a place where the mouse can climb onto the rail laid on top of the bucket.

The mousetrap will work even if the container is empty, but to increase efficiency it is recommended to fill the bucket about a third with water. This trap works simply. The mouse walks along the ruler, attracted by the smell, but, having overcome the intersection of the ruler and the knitting needle, it shifts the center of gravity of the structure.

As a result, the end of the ruler, hanging freely over the bucket, sharply lowers and throws the rodent into the container. In order for the mousetrap to be triggered repeatedly, the bait should be secured to a rail so that when triggered, it does not fall into the bucket along with the mouse.

Take a jar of paper

This DIY mouse trap is made by analogy with the previous one. To allow mice to climb to the top of the jar, a “ramp” is installed, but in this case the bait is placed inside the jar, the neck of which is covered with paper. In order for the paper on the neck of the jar to become a real trap for rodents, it is carefully cut (for example, with a razor) crosswise.

As soon as the animal hits the paper, the “petals” formed during the cut bend inward, and the mouse falls into the jar.

In other options, it is possible to place a lightweight bait directly in the center of the cut paper, or the bait is tied to a rope and placed above the center of the jar. The disadvantage of such a simple trap is that it is not very effective. Mice somehow sense a trick and are afraid of the cut paper.

We use a glass jar and a coin

This homemade mousetrap from a jar is simple and can also be made from a saucepan, and if desired, the coin can be replaced with a large button or a metal washer. A coin (button, washer) serves as support for the raised edge of the jar. A strong thread with a hook at the end is glued or tied to the support.

A rod is installed inside the container (you can use wire, a twig, etc.), through which the thread is thrown. The bait is put on the hook. Attracted by the aroma, the mouse pulls the hook with the bait, after which the thread tightens and pulls the support out from under the can.

For maximum effectiveness, the bait should be placed at a distance of 2-4 cm from the surface. The disadvantage of the trap is that it requires reloading. That is, having “covered” one mouse, the can ceases to be effective.

In a simpler version, the bait can be glued to the wall of the jar, then when you try to get to it, the mouse will shake the jar, which will lead to the support falling. In order to remove a caught rodent, it is convenient to slip a sheet of cardboard under the triggered can.

Plastic bottle traps

This DIY mousetrap is made from a plastic bottle in a few minutes. The container is cut at 2/3 of the height (the longer part is with the bottom). After this, the part with the neck is turned over (the neck without the plug becomes directed into the structure).

The neck is lubricated with oil, and the bait is placed inside the container. To prevent the parts from coming apart, they can be fastened with glue, wire or another method. The mouse easily slips through the lubricated neck, but cannot get back out.

Another simple mousetrap that even a schoolboy can figure out how to make.

A plastic bottle (the neck is cut off approximately at the point where the narrowing begins) with the bait inside is placed on a table or shelf so that a significant part of the container hangs over the edge of the surface. In this case, the bait should be located at the very bottom.

Such a trap is tied to a shelf with twine, the length of which ensures that the trap hangs above the floor when it falls. When a mouse gets into a bottle, it shifts its center of gravity. The trap falls and hangs together with the caught rodent.

Other trap options

A mousetrap made from a bucket and a rotating bottle is one of the most ingenious solutions on the topic “how to make a mousetrap at home,” but it is also effective and easy to implement. It requires a metal rod-axis and a plastic bottle with a cap. Holes are made in the container (in the lid and bottom) along the diameter of the axis, after which the bottle is put on the rod so that it remains able to rotate freely.

The rod is placed on the edges of the bucket. Optimally secure its position while maintaining mobility. It is recommended to fill a bucket (you can also use a basin) with water. As bait, the bottle in the center is coated with any composition (attractive in smell to mice) (processed cheese, sunflower or peanut butter, etc.).

After this, a “ramp” is built from the floor to the edge of the bucket.

Having freely reached the edge of the bucket along such a “bridge,” the mouse tries to move onto the bottle, but the latter, under the weight of the rodent, turns around its axis and throws the pest into the container. When choosing how to make a mousetrap with your own hands, you should not lose sight of simple glue traps.

They will require special glue for rodents, which is sold in specialized stores, bait and bases (you can use thick cardboard, small plastic pallets, plywood, etc.). The base is smeared with glue, and the bait is placed in the center of the trap.

Getting to the fragrant “treat”, the rodent sticks to the viscous composition.

Many consider the disadvantage of such a trap to be unaesthetic. It is no longer possible to unstick the animal from the mousetrap, and the sight of floundering rodents and their squeaking does not bring pleasure if the owners are at home.
Source: "home-gid.com"

Mice that rule the house are not cute gray animals, but formidable pests. The nimble rodents destroy supplies, carry dangerous diseases, damage wiring, and frighten their owners when they suddenly appear. You can get rid of pests in different ways.

Toxic chemicals are not always allowed to be used, and cunning rodents often avoid factory traps. We have to look for non-standard solutions. Many owners are interested in how to make a mousetrap with their own hands. The article describes options and rules for making simple devices for catching mice.

Gray pests look for food and shelter in an apartment or private house when cold weather sets in. Residents of rural areas are faced with an invasion of rodents in the fall, when there is nothing else to eat in the field.

Mice often live in the basements of high-rise buildings; if cracks are poorly sealed, holes in the floors and baseboards, they can easily get into apartments. Nimble pests penetrate not only the first floors, but also travel higher up through the ceilings. Will mice build a nest in every home? What conditions attract gray pests?

The likelihood of having unpleasant neighbors increases in the following cases:

an old house or apartment where the owners have not done renovations for a long time, cracks and holes in the baseboards and floor;
The location of the apartment is on the ground floor;
Private house next to a field;
Unsanitary conditions in the home;
Storing food with the lid of the container not tightly closed, bags of cereals and flour purchased “in reserve”;
Crumbs on the table, crumbling cookies, the habit of leaving the trash can open at night and throughout the day.

If one mouse gets into the house, it is not always possible to immediately recognize traces of the activity of the nimble pest. Negative consequences appear over time.

The sooner owners pay attention to suspicious signs, the higher the chance of catching a nimble mouse. You can’t hesitate: gray pests are highly fertile. Mice probably live in a private house or apartment if the owners notice the following signs:

at night you can hear a slight rustling in the pantry, in the kitchen, behind the stove, on the shelves of cabinets where bulk products are stored;
wires with teeth marks. If you do not pay attention to this sign, mice can damage the wiring, which often causes a short circuit;
There is a specific smell in the house. The more gray pests there are, the more clearly the unpleasant symptom appears.

The reason is excrement left by rodents on the floor, among cereals, packets of cookies; gnawed bags and packages with flour, pasta, rice, millet;

droppings resembling grains of a dark, gray-black color. Traces of pest activity appear not only on the floor or near baseboards, but also in food bags.

Important! The sooner owners pay attention to suspicious signs, the higher the chance of catching a nimble mouse. You can’t hesitate: gray pests are highly fertile.

Field mice living in private houses and apartments are dangerous to humans. You shouldn’t be touched or feel sorry for the “cute rodents”: pests often carry pathogens that are difficult to treat.

Damage caused by mice in the home is not only a deterioration in health. Gray rodents spoil food supplies and chew through packages of cookies, flour, and cereals. There are other unpleasant moments:

There is a risk of damage to the wires;
Excrement left by pests in different places has no place in a person’s home;
Rodents rustle in the kitchen and pantry at night, disturbing the owners’ sleep;
An unpleasant “mouse” smell can be heard from under the linoleum and baseboards; nimble rodents appear suddenly and often frighten household members.

You can catch a mouse without a mousetrap, or you can make several devices of different types with your own hands at home to catch nimble rodents. Traps are either disposable or reusable.

The owners will need items that are always at home: a bucket, a plastic bottle, a glass container, bait, plywood. Do-it-yourself mousetraps and mouse traps are in no way inferior to factory-made products; the cost of simple traps is much lower.

First you need to find the hole from which the nimble rodents come out, and determine the approximate number of mice.

Sometimes there are so many pests that they calmly move around the house not only at night, but also during the day, despite the presence of residents.

for greater efficiency, owners who have experienced the effect of trapping containers recommend installing several devices;

one more nuance - the bait for mice should have a bright aroma. Good options: makha, fried sunflower seeds, lard, smoked sausage, cheese;

Don’t despair if rodents bypassed one trap: you’ll have to try another option, fortunately, the cost of homemade devices is minimal.

Jar traps

How to proceed:

Wash the liter container and roll it up with a metal lid;
Carefully cut the surface with a knife from the center, like a cake, slightly bend the sharp teeth down in the central part;
inside, put a piece of smoked sausage or lard, wheat grains, fresh bread or crispy crackers;
attracted by the smell of the bait, the mouse will penetrate the jar, but sharp strips of tin will prevent it from getting out.

From a plastic bottle

How to make:

Wash the container (preferably with a volume of 2 liters, no less), cut off the upper part in the narrowing zone (you will get a base and a cone);
cut off the neck from the smaller part so that a mouse can get into the hole;
turn the cone over, insert it into the lower part, seal with tape the junction of the plastic elements;
put bait with a pleasant smell at the bottom of the bottle; the gray rodent smells the alluring aroma, makes its way inside through the hole, but does not get back out.

We use a bucket

How to proceed:

You will need any bucket and a metal rod or a round wooden stick;
Mount a rod into the upper part of the container, first place a plastic bottle or tin can on it;
The main task is to achieve free rotation of the container if you press lightly on it;
Place the prepared trap next to the mouse hole, place a bait with a bright smell on the top of a tin or plastic container;
The mouse smells cheese, lard or sausage, climbs onto the bottle, the container turns over, and the rodent falls down; For the operation to be successful, the bottle must be placed closer to the edge of the bucket so that the rodent can easily climb onto it.

Glue traps

The method of catching rodents is quite simple, but effective. The only drawback is the unaesthetic and inhumane nature of the method. How to proceed:

buy special glue for rodents, a base for a trap (thick cardboard, plywood, shallow plastic tray);
Thickly coat the surface with glue and place aromatic bait on the central part;
On the way to the bait, the rodent will stick to the sticky surface. It will not be possible to remove the pest from the adhesive base.

The owners will only have to destroy the mouse and throw away the trap.

Prevention of occurrence

Owners of private houses and residents of lower floors should be especially careful: the risk of encountering dangerous rodents increases. Following simple rules will help prevent the penetration of gray pests. How to proceed:

Seal cracks in baseboards and floors, replace dried out trims;
Call sanitary services for unscheduled deratization if rodents are actively breeding in the basement of a high-rise building;
Maintain cleanliness and order in the home, do not clutter the pantry; Take out the trash on time and do not accumulate food waste;
Wipe the dining table thoroughly, sweep away crumbs, and never leave food in open containers overnight;
Do not store flour, pasta, or cereals for future use: bulk products often spoil, harmful bugs and rodents contaminate them with their excrement;
If mice frequently enter an apartment, cellar or private house, use an ultrasonic repeller.

The modern device will reliably protect residential and utility rooms from gray pests. Repellers are effective not only against mice, but also drive rats out of their homes. When mice appear, you should not rely only on pesticides.

Many owners successfully use trapping containers made from scrap materials.

The article contains answers to the question: “How to make a mouse trap with your own hands?” Through simple experiments, you can choose the best option for a home trap for catching nimble pests.

With the arrival of autumn cold weather, mice begin to actively move from summer areas to human houses and apartments. Every year we have to contain the rodent infestation and look for more and more effective methods of control. There are only two ways to defeat the invasion of mice that have settled in your house or garage - get a cat or regularly install mousetraps. The bigger, the better. The easiest way is to make a mousetrap from a plastic bottle with your own hands. Costs are minimal, especially since there is plenty of material for traps. If you guess the design of a mousetrap made from a plastic bottle, then you can end the problem quickly enough.

Which trap to choose

At first glance, the easiest way is to buy a ready-made mousetrap or make a similar design with your own hands. But this is only at first glance. A mouse, like a rat, has considerable intelligence, learns quickly and remembers well how to bypass mousetraps. Therefore, it will be useful to periodically replace old plastic bottle mousetraps with new, more effective and efficient designs.

Most often, several of the most popular designs are used to combat domestic rodents:

Petal mousetrap, it can be made in a couple of minutes, there is a considerable risk that the mouse may escape from the trap before it is reached;
Falling mousetrap, if you make a structure from a plastic bottle exactly as described, then the effective operation of the device is guaranteed;
A mousetrap is a rocking chair, the most difficult to make, but also the most effective. It can be done in several ways, the main thing is to follow the principle of operation. Such mousetraps can operate reliably for many years without any major complaints.

Advice! Don't underestimate the ability of mice to escape traps. You need to check traps as often as possible, since according to statistics, approximately half of the rodents successfully escape from the trap.

You can get an idea of the capabilities of mouse balancing act and understand how to make a mousetrap from a plastic bottle from the video

What you need to know before making a bottle mousetrap

First of all, you should not count on the absolute effectiveness of a mousetrap; even the most successful and effective, at first glance, trap can malfunction, so it will be useful to observe how the mouse falls into the trap and, most importantly, how it tries to get out of it. Such observations can be very useful when it comes time to make a new, more cunning mousetrap.

When planning the design of a mousetrap, there are three factors to consider:

The plastic bottles from which the traps are made must be changed at least once a month;
Poisons and toxic substances must not be used in mousetraps;
The labor intensity of making a mousetrap from a plastic bottle should be minimal, otherwise this activity will quickly get boring.

The mouse has the ability to capture the most subtle odors. If a dozen mice are caught in a mousetrap, then odors with “signals” of panic will definitely remain on the plastic bottle. Such mousetraps should be thrown away without regret, and a new trap can be made to replace the old one.

The material of a plastic bottle does not pose a particular barrier for a rodent, so it is important not only to catch, but also to get the mouse out of the trap in time, before the animal simply gnaws a hole and runs away with the bait.

Options for the most successful mousetraps

All of the mousetrap designs below do not require special skills or tools and can be made, as they say, “on the knee” in a few minutes. To build a trap you use:

Scotch tape and adhesive tape, nylon threads;
Plastic bottles with a capacity of 2 and 3 liters;
Scissors or stationery knife;
Bait.

Advice! A piece of salted lard, fried seeds and a walnut kernel work reliably as bait.

Oddly enough, cheese or sausage are significantly inferior in effectiveness to lard; such bait quickly dries out and loses its attractiveness.

Make an effective bottle mousetrap in 60 seconds

A simple and quite effective mousetrap can be made from an ordinary three-liter plastic bottle. We use a nut kernel as bait. The full course on how to make a mousetrap from a plastic bottle is shown in the video

Initially, you will need to make a mount for the bait from two loops of nylon thread.

Using a utility knife, make a cut on the wall so that you get a petal covering a small window. The window size should be no more than 20 mm. Due to its rounded shape, the petal should easily bend inside the plastic bottle and not deviate outward, preventing the mouse from getting out of the trap.

We pierce the side walls of the bottle on both sides, stretch the thread with the bait and fix the suspension in a taut state using matches and tape.

The place for hanging the bait can be chosen at a height of at least 10-12 cm from the bottom, this is enough for an ordinary mouse, sometimes rodents demonstrate miracles of jumping ability, so the design of the trap can be supplemented with another bottle, which will catch everyone who covets the bait.

The simplest mousetrap options

The simplest version of a mousetrap made from a plastic bottle is shown in the video

You can make a simple device with your own hands in a few seconds. You only need to cut off the neck and cut the edge of the remaining container with scissors in the form of triangular teeth, 30-35 mm long.

The jagged edges are folded into the bottle, and the bait is placed on the bottom of the trap. According to the creators' plan, the mouse gets inside the mousetrap, but will not be able to get out of it because of the teeth.

A more effective version of a mousetrap can be made from a plastic container according to the diagram below.

You need to cut off the top of the bottle, turn it over, remove the cap and put it back into the cut part. The result is a design reminiscent of an old non-spill inkwell.

A good falling mousetrap can be made from an ordinary plastic bottle with a window cut out in the neck area. Bait is placed at the bottom of the bottle, and the trap itself is tied with a cord around the neck and placed on the table.

To trigger the mousetrap, it is placed on the edge so that the bottom part with the bait is behind the edge of the tabletop. The mouse, having climbed into the bottle, upsets the balance, which leads to the container tipping over and hanging on the cord.

Getting out of the mouse container is quite difficult. It will be necessary to remove it from the trap in time before the cat steals it along with the trap.

How to make a mousetrap - a rocking chair

The most perfect mouse trap can be made using the principle of a swing or a pendulum. The principle of operation of the mousetrap is in many ways similar to the previous version of the trap, the only difference being that the bottle does not tip over from the table, but tilts under the weight of the mouse, blocking the exit from the trap.

The typical design of the device is shown in the photo. The principle of operation can be seen in more detail in the video.

In order to make a trap, you will need a 1.5 liter bottle, preferably with a long and narrow neck. Since the mousetrap must swing freely under the weight of the animal, you will first need to determine the line on which the center of gravity is located. To do this, you can place an ordinary faceted pencil on the table and a container on it. Moving the bottle left and right, we find the equilibrium position and mark the line with a marker.

According to the plan, the bottle should swing on an axis of rotation, which can be used as a piece of flat steel wire or a bicycle spoke. On the balance line, mark the midpoint and use an awl to punch two holes through which we pass the axis of rotation.

A plastic container with a steel axis will need to be installed on a stand. To do this, you can use a small piece of board, 35-40 cm long. We nail two wooden blocks of the same size to the board, on which the axis of rotation will rest. When rocking, the neck of the bottle should lower and rise at least 20-30 mm.

All that remains is to manufacture and install the locking block. The height of the block is selected such that, in a raised position, the lower edge of the hole for the plug is at the same level as the upper edge of the wooden block. This way, the mouse can easily climb up the bar into the trap. Under the weight of the rodent, the bottle will turn and close the entrance to the container. It is clear that the weight of the bait should be half the weight of the rodent, optimally 3-5 g, no more.

Trap made from a plastic bottle and bucket

The oldest and most proven mousetrap can be made from a half-liter bottle, wire and a galvanized bucket. Initially, you will need to drill a hole equal to the diameter of the wire in the bottom and in the cap of the bottle. The latter plays the role of an axis of rotation, so the plastic container should rotate freely and effortlessly. The length of the wire is chosen 5-7 cm larger than the diameter of the bucket.

The bottle, dressed on a wire, is additionally fitted with a tin lid used for preservation. From the side of the bottle, a bait is tied to the lid and the entire structure is installed on the bucket. You can attach a wooden plank or plank to the bucket to make it easier for the animals to climb up. If there are a lot of mice in the garage or basement, then the inside of the bucket must be wiped with oil or filled with water to make the surface as slippery as possible. Up to ten animals can be caught in a trap during the night, so measures must be taken to prevent mice from escaping from the trap.

The mousetrap works quite simply. The mouse, trying to get to the bait, steps onto the rotating bottle and falls down. Due to the slippery surface of the plastic, it is almost impossible to catch on the bottle. Unlike previous designs, such a mousetrap can be freely left overnight without fear that rodents will damage the trap or be able to escape from it.

Instead of a bottle, you can use any object with a large diameter and a smooth surface. You can install a ruler, a piece of polypropylene water pipe, and even a piece of glass. Wood and untreated metal work the worst.

Conclusion

The above mousetrap designs are not an absolute panacea for mouse infestations. The devices help catch a fairly large number of rodents, but over time their effectiveness decreases. After a couple of weeks, the animals will learn to bypass the trap, therefore, the more often the locations of the traps, their design and shape change, the more successful the pest control will be.