Manufacturer: Motive (Italy)
“BOX” series of worm gearboxes Motive made in an aluminum case by press casting. The shape of the body is designed based on the conditions of analysis of thermal conductivity, resistance to deformation when operating under load, as well as optimization of drainage (removal) of water during the washing process.
On sizes 063 and 075, tapered roller bearings are installed at the ends of the worm shaft to increase resistance to axial loads. In addition, on all standard sizes of gearboxes, bearings are combined with nylon rings, which allows you to retain oil in the bearings, even if they are not in an oil bath, and to operate worm gearboxes in any mounting position without additional modification of the gearbox.
In addition, VOX gearboxes are supplied filled with synthetic oil and do not require any additional oil during their entire service life. Maintenance. To reduce noise, increase efficiency and service life of gearboxes, the worm shaft is made of surface-hardened steel, and the worm wheel gear is cast from bronze. To reduce roughness and increase hardness work surface the worm wheel is running in operating mode. To ensure a perfectly flat mounting surface, all mounting surfaces of the gearboxes are ground.
On gearboxes from BOX050 to BOX110, open ball bearings are replaced with closed ones. With the help of a cap, the oil level is maintained much longer, and worm gear requires even less maintenance.
Dimensions of gearboxes BOX040
| Type | A | C | G | H | I | K | KE | L |
| BOX040 | 70 | 101 | 70 | 50 | 40 | 60 | M6x10(n°4) | 71 |
| Type | M | N(h8) | N1 | O | P | Q | R | S | V | W |
| BOX040 | 75 | 60 | 36.5 | 6.5 | 87 | 55 | 71.5 | 6.5 | 35 | 45° |
| Type | output | Kg | ||||
| T | G1 | D(h7) | b | t | ||
| BOX040 | 23 | 78 | 18 (19) | 6 | 20.8 (21.8) | 2.7 |
Flange dimensions for mounting electric motors
| Type | Electric motor, IEC | Nm | mm | Pm | i | |||||||||||
| 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | ||||||
| Dm | ||||||||||||||||
| BOX040 | 63 | B5 | 95 | 115 | 140 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 |
| B14 | 60 | 75 | 90 | |||||||||||||
| 71 | B5 | 110 | 130 | 160 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | ||||
| B14 | 70 | 85 | 105 | |||||||||||||
| Type | K1 | G | KG | KH | R |
| BOX040 | 100 | 14 | 31.5 | 10 | 18 |
| Type | d(h6) | B | B1 | G1 | H | L1 | f | b1 | t1 |
| BOX040 | 18 | 40 | 43 | 78 | 9 | 164 | M6 | 6 | 20.5 |
Characteristics of single-stage worm gearboxes BOX040
| Engine power, P1 (kW) | Output speed, n2 (rpm) | Torque, M2 (Nm) | Service factor, f.s. | Gear ratio, i | Electric motor, IEC |
Pressure unit for waste water removal (underground installation)
Application
For installation under the floor, used for drainage Wastewater
- from flooded premises
- garages
- from the basements
- from shower cabins, washbasins, washing machines/dishwashers
Designation
Product Features/Benefits
- Easy installation thanks to built-in pump and check valve
- Large tank volume
- convenient maintenance.
- Pumps with pressure line can be pulled out
- Tile frame made of of stainless steel with siphon
- With extended connection for a second tank
Materials
- Tank for underground installation: synthetic material polyethylene
- Motor: Stainless steel
- Hydraulic housing: synthetic material PP-GF30 for Box 32…, gray cast iron EN-GJL-200 for Box 40
Specifications
- Mains connection 1~230 V, 50 Hz
- Mains connection cable, 10 m long (5 m at 40/10), with shockproof plug
- Operating mode S3 -25%
- Pumped liquid temperature max. 35° C, at 32/8 and 32/11 for a short time (3 min.) 90° C
- Discharge pipe Ø 40 mm
- Connection to 100 mm inlet pipe
- Connection to ventilation system 100 mm
- Protection class IP 67
- Total tank volume 85 l
- Switching volume 22 l, at 40/10 30 l
Equipment/functions
- Ready to connect
- A plastic tank with a pre-installed pump to remove contaminated water, a pressure pipeline and a built-in check valve
- Motor thermal control
- Level control via float switch
Description/design
Automatically activated drainage system with built-in submersible pump and a check valve. Ready for installation in underground space. Flexible application thanks to three inlet options according to DN 100 and connection (DN 100) to a second tank.
Scope of delivery
Ready to connect, pre-mounted pump with integrated float switch in an impact-resistant plastic tank for installation under the floor. The installation is completely ready for operation thanks to the pre-installation of the pressure pipe and check valve. Pump cable (5 m or 10 m long) with integrated shockproof plug. installation and operating instructions.
You can buy professional car wash equipment from us at the most affordable prices. low prices in Moscow. We offer the full range of car wash necessities, including water purification systems, foam generators, dry cleaning equipment and rotary consoles. Also widely represented are cleaning equipment, scrubber dryers and vacuum cleaners, which are successfully used in their work by cleaning companies and large enterprises.
Our company’s special pride is own production treatment systems for car wash. "Cleaning stations for car washes" are selected by the following parameters: the number of washing stations at your car wash, the power of the machines high pressure, the required degree of wastewater treatment, the need for disinfection. Buying wastewater treatment plants for a car wash with us, you can get them in the shortest possible time. We organize free delivery even in the Moscow region.
The Portotehnika service center has a number of undeniable advantages before competitors. Firstly, the equipment troubleshooting period is minimal and does not exceed 2 working days. Secondly, the Portotekhnik spare parts warehouse is so large that you will always find the necessary spare parts specifically for your high-pressure apparatus or vacuum cleaner. Upon request, details of Portotechnics equipment can be sent for self-repair and maintenance.
Delivery of professional Portotehnika equipment throughout Moscow is carried out by us free of charge. When sending to the regions, you need to agree transport company, with the most convenient location. We work with all leading carriers in the country. We ship Portotecnica car wash equipment daily from 11-00 to 23-00 and even on weekends.
Article: CDVE49716
Description of FIRE BOX 40:
The model is a generator hot water. This unit is an innovative solution among sinks that clean using hot water. Thanks to the generator, the water heats up to 140 degrees.
The device comes with a heat-resistant hose. This hose can withstand high pressure. This powerful washing machine is used on construction sites and also industrial enterprises with high productivity.
The casing and wheel frame are made of painted steel sheets. Convenient movement of the generator is carried out using two rigidly fixed wheels, as well as one swivel wheel. In addition, there is a locking pedal.
The performance boiler is not welded. It is made of special stainless steel. It is also recommended to purchase an effective fine water filter for the device.
Technical characteristics of FIRE BOX 40 Portoecnica Hot water generator:
- Pressure (bar) 30-200
- Capacity (l/h) 360-1260
- Power (kW) 0.3
- Weight (kg) 111
- Power ~1/220/50 f/V/Hz
- Max. inlet water temperature (°C) 50
- Tank for cleaning products Yes
- Maximum leaving water temperature (°C) 140
- Dimensions (mm) 79x75x92
- Fuel tank volume (l) 18
- Fuel consumption (kg/h) 7.4
Equipment:
- High pressure hose heat resistant 10 m