Open verandas require a more careful approach to the choice of materials for finishing the ground. The decision from which to install the ceiling on an open veranda should take into account that when seasonal influences change, the effect of moisture on precipitation and other atmospheric influences will be subject to temperature fluctuations. With this in mind, it is necessary to choose a design and material that can withstand such harsh operating conditions.
The main problem will be the choice of the most suitable material.
The house has a veranda: expanding the usable space (more than 120 best projects)
It should be waterproof, strong and beautiful. At the same time, it is very important that the ceiling cover on the open veranda is well connected with the decoration of the outer walls of the house, which is part of this room. The choice of materials presented in stores that meet these requirements is not overwhelming:
- Plastic panels
- Both and boards
- Paving with plastic or metal
- drywall
- OSB panels
In the case of the last two materials, you will not only have to cut the ceiling, but also finish the surface.
plank
If you choose how to cut the ceiling on outdoor verandas, it is relatively inexpensive and quick, then the most convenient option is a plastic panel.
Coverage is simple and takes some time. The cost of such materials is also not too high, which will allow you to get a great upper limit with minimal costs.
There are only a few drawbacks to this resolution.
These include relatively low cold strength - the plastic becomes brittle and can be easily damaged. Also, the assembled surface is aesthetically far from perfect - the cheapest slabs don't look very nice, but they are very suitable for budget finishes.
Both and boards
One of the best options for the relationship of beauty and value.
For a small amount of money, you can get a very beautiful natural wood ceiling. You can draw it in the color you want and repeat if necessary. Installation is not a problem - even an experienced person will have to deal with, and the time for all the work will be at least mandatory.
In addition, wood is completely compatible with any type of wall decoration. If you decide to cover the ceiling on the terrace, with a smaller renovation budget, you can stay at the base, but if they allow it, you can buy beautiful plates in different types of wood.
The disadvantages of this possibility are seasonal deformation of the material and the need to treat wooden parts with special compounds that prevent rotting and pest damage.
In addition, panels and substrates can warp due to temperature changes. In this case, the installation must be taken into account.
toilet
The material, originally intended for finishing vertical surfaces, will perfectly perform the function of a decorative ceiling in this part of the house. The panels are made of durable plastic or metal and are ready for any challenge in outdoor use, so it is recommended to install the ceiling on the veranda.
There are virtually no downsides to this design, except that some grades of plastic parts may fade over time.
The cost of the cover is completely affordable and the installation is very simple, with special fasteners.
Drywall and OSB panel
Both materials can only be used if they are purchased waterproof. Their standard types combine one drawback - poor water resistance.
Therefore, when buying, pay attention to the marking of panels and sheets. Installation is not particularly difficult, depending on the size of the parts, it takes some time.
However, additional complications begin - GKL must be installed with a special plaster suitable for outdoor use, and after both types of wallpaper must be painted with weather-resistant paints.
Other things that are the same, when choosing what to overtake on an open veranda, it is better to give priority to the OSB panel. Unlike GCR, it does not require any additional output other than coloring.
Finishing the veranda inside and out
Veranda decoration: decoration in style
A veranda is usually called an extension adjacent to one of the walls of the house. This building belongs to the category of summer, unheated premises. By their design, verandas can be either open, that is, under a roof, but not glazed, or closed.
It is quite natural that the decoration inside the veranda is made depending on this fact. And yet, the configuration of the extension and its exterior finish should harmoniously fit into the exterior of the house.
Design features of the verandas
The veranda plays not only a decorative function, but is also necessary from a purely practical point of view.
A well-lit room, without cabinet furniture, decorated with many indoor plants, is the best suited for a pleasant stay in the summer.
Covered veranda with lots of plants
- The veranda can be combined with the main entrance to the house. In some cases, the entrance to the veranda can be carried out from any room, that is, it does not have access to the street.
Such a veranda is shown in the photo above. But such an extension should be provided in the process of building a house.
- If there was no veranda in the project, then it can be attached to the house later. But in order not to have to punch a doorway in the bearing wall, this is done on the main facade, in front of the front door. You won’t have to carry out any engineering communications there, so you can build a veranda with your own hands.
- Naturally, the extension should correspond as much as possible to the design of the house.
The main thing is to correctly complete the foundation for the veranda. It is better to do this in the summer, otherwise, after thawing, the ground may subside, and your veranda will simply move away from the wall of the house.
Think carefully about what it will be built from and how it is finished on the outside so as not to spoil the appearance of the building.
- Usually, a columnar foundation is made under the veranda. This is quite enough to withstand the weight of the frame and its skin.
The brick pillars of the foundation are laid out in pits up to one meter deep, under each corner post. If the veranda is more than one and a half meters long, intermediate pillars are also made.
Scheme of a columnar foundation
- In the pits dug under the foundation, sand cushions are first arranged, about twenty centimeters high.
Small gravel is poured over the sand, and it is poured with a liquid solution. In order for the water from the solution not to go into the sand, it is better to lay a roofing material with a bend of 10 cm along the walls of the pit on it, before filling the rubble.
- The resulting concrete pad will be the support for the brick column. Before laying it out, concrete must be coated with liquid glass, or bitumen. Any other waterproofing composition will do. The height of the pillars must be calculated so that the floor mark of the veranda is 20-25 cm lower than in the house.
- After the masonry is completed, the inner cavity of the columnar foundation is filled with gravel, stone, broken brick - any material at hand.
The outer surface of the pillars is also coated with a waterproofing compound.
- Wooden beams (logs) will rest on the foundation pillars. Beams before laying must be treated with an antiseptic solution. This will not only protect them from saturation with moisture and decay, but also protect them from damage by insects and rodents.
This is just one of the options for building a foundation for a veranda. It may have a different design, depending on the size of the veranda under construction and its walls, if any.
In each case, you need instructions, and best of all, a project.
Veranda wall decoration
If the house to which the veranda is attached is log, made of timber or frame-panel, then the most organic option would be to make the walls of the extension made of wood. Although, you can make a frame from a metal profile, and then simply sheathe it with clapboard. Especially if the veranda is planned to be glazed.
Aluminum stained-glass windows in the veranda glazing
- Then for this purpose you can use aluminum stained-glass windows installed directly on the plinth of the veranda.
Their use solves two problems at once: the erection of walls and their decoration, or rather, its absence. Washed glass - that's the whole finish.
It remains only to decorate the plinth and intermediate racks: with facing bricks, or, for example, with stone.
- It is possible to solve such a problem as finishing verandas, combined with the construction of walls, with the help of glass blocks. This material is both constructive and decorative.
- In addition, the country's construction markets offer a truly huge range of blocks: with corrugated glass, colored, matte.
There are options for blocks, with decorative applications in the inner cavity - it's so beautiful!
Glass porch walls
- Various options for glass blocks can be combined as you like, make panels, make backlighting.
Of course, the price of such a veranda will be more expensive than the one whose walls are sheathed with plywood or plastic, but the beauty that you get in the end is worth it.
- In our example, the windows of the veranda are small, and are high from the floor. But thanks to the translucence of glass blocks, it is light on the veranda without additional lighting.
By the way, in this case, window openings could also be made on the roof, in the manner of skylights.
In the construction of the walls of the veranda, you can combine both options mentioned above: make one wall from glass blocks, and the other two from aluminum stained-glass windows. The fourth wall is the load-bearing wall of the house. It will be decorated in the process of interior decoration of the veranda.
Wood in the veranda
If the veranda is open, then the concepts of exterior and interior decoration are mixed. And most often, such verandas are made of wood: both structural and decorative elements.
- Of all the materials that can be used to build and decorate a veranda, it is wood that will create the most favorable environment for relaxation, saturating the air with its unique aroma.
Wood covered veranda
- Racks supporting the roof of the veranda can be made of rounded logs or timber with a section of 15 * 15 cm.
In the simplest version, as in the example above, the floor of the veranda is made of ordinary edged boards, not even painted. The ceiling is hemmed with a standard clapboard, and the parapet is made of ordinary bars used for mounting the battens.
- But many homeowners do not want to save on finishing the veranda, and prefer to decorate this corner for relaxation, solidly and soundly, as they say, for centuries. For such cases, manufacturers of wood finishing materials will always have the right offers.
- One of these options used today in exterior finishes is decking.
Ways to finish and insulate the ceiling on the veranda: choose materials
Otherwise, it is called a terrace board. This concept can also include garden parquet and deck boards.
Veranda floor lined with garden parquet
- It is made not from solid wood, but from a wood composite. That is, it contains polymer additives.
But in this case, this only improves the characteristics of products that are very durable and are not afraid of moisture. And this is very important both for an open space and for a closed, but not heated.
External decoration of the veranda, made by planken
- Expensive and high-quality wood for outdoor decoration is larch or ash planken.
This is the name of the facade planed board, obtained from a solid array of wood. Planken differs from the usual planed board in the shape of the section, which has beveled and rounded chamfers. The planken does not have connecting grooves, like a lining board, which allows it to be mounted with gaps, and not just end-to-end.
Mounting a planken with a gap
- In principle, a wooden veranda can be attached not only to a wooden house, but also to a brick or stone house.
The main thing is that the color scheme of its finishing should be in harmony with the facade decoration. But a tree can not only be painted, but also carved in the design of its surface, and craftsmen in Russia have always been enough.
Finishing outside: wooden veranda with carved elements
Here is a great example of carving in veranda design.
There are twisted pillars, and a beautiful carved parapet, painted in contrast to other structures, and hinged arched elements with a lace pattern. Take note!
Interior decoration of the glazed veranda
The interior design of a glazed veranda can, in principle, be considered as a loggia decoration.
But the veranda, as a rule, is more spacious, which means that it has more design opportunities. So:
- Although this room is considered summer, nothing prevents you from installing heaters on the veranda, as in our next example, and using the veranda all year round, and not just in summer.
Then absolutely any finishing materials can be used.
Heated covered veranda
- And here is an example of the interior design of the veranda. In addition to the stained-glass windows, the roof of the room is also made of glass, thanks to which the room is simply flooded with light. To avoid direct sunlight, frosted acrylic glass was used in the glazing of the roof windows.
- An excellent addition to the interior of the veranda can be some unusual blinds or original curtains. The design of the ceiling, of course, will depend on what kind of roof is made. In addition to wood, you can use plastic and MDF in its decoration, hem it with drywall and paint it, line it with polystyrene tiles, make a false ceiling - whatever.
Carpet on the floor of the glazed veranda
Yes, and the walls can be decorated in different ways, but almost always in bright colors.
The floor on such a veranda can be almost anything: from tiles to parquet. In the image above: the floor under the plinth is covered with carpet, around the entire perimeter of the room. You can’t do without upholstered furniture on the veranda - well, what a vacation without a comfortable sofa!
Finishing the veranda inside and out with your own hands
Most often, speaking of a veranda, we mean an open or closed extension to one of the walls of the house, where it is convenient to spend time relaxing or having lunch. But the terrace, being one of the varieties of an extension to the house, differs from it, although their concepts are somewhat similar.
A terrace is a structure that has support on pillars, a roof, adjacent to the house on one side. On this side is the exit to the terrace from the house. The remaining sides are open, the effect of unity with nature, which gives the terrace, is very strong. Even heavy rain, which can be observed under the roof of the terrace, fully feel its dampness, humidity, hear all the sounds, will not soak someone who is on the platform open from three sides.
And a cup of tea before going to bed, in an armchair in the fresh air, is a luxury that not many people can afford.
As for the veranda, this building happens both on the first floor and on the second.
Interior decoration of the veranda in a private house photo
Cottages with such a structure on the second floor look quite stylish and impressive. Therefore, much attention is paid to the decoration of the closed veranda on the second floor - this indicates the status of the owner, his taste. This room also has a roof, which can be made in the traditional way, or glass, which will allow a large amount of daylight during the day to be in the room.
Finishing an open veranda in the country (from the photo you can see that it can be stylized for anything) requires a special creative mindset.
You can decorate it with evergreen cypress seedlings around the perimeter, then it will turn into a building in the Greek style. You can make the decoration of the veranda inside in the form of a winter garden or a stone palace.
A carefully thought-out interior will give this building a special look, make your own corner of creativity and fantasy out of an ordinary house.
Decorating the pillars of the veranda with wood carvings or decorating them with climbing ivy or creepers will add a charming look to the design of the terrace.
This design is built both on one side of the house (open or closed), and around the house. If it is built in length along the perimeter of the house, the structure looks like a gallery, but if it is a rectangular extension, it looks like a pavilion.
For the summer period, the building is built without insulation and glazing. Wall decoration on the veranda can be made in different materials. And for the winter, the living space goes into one where the windows are equipped with double glazing. Finishing a closed veranda in a private house (see photo) even allows the installation of a fireplace (biofireplace or false fireplace) to create a cozy atmosphere that will be comfortable.
How to finish the veranda in the country, photos, ideas
Verandas come in different types, depending on how the design of the house is intended, they choose open (terrace) or closed (glazed) types.
Different cladding options will create a different impression when creating a design.
It is also important what the decoration of the veranda will be, because the main purpose of this extension is the comfort of those who spend their leisure time here.
Guided by your own taste in the process of finishing, you should not forget about some rules in order to get the desired result.
If the decoration of the veranda in a private house (pictured) suggests that it will be open, you need to make sure that the building materials that you will use for decoration are resistant to precipitation and dampness, withstand high humidity.
The tree in the decoration of the veranda inside with your own hands provides for mandatory pre-impregnation with an antiseptic, such a step will avoid not only premature deformation of wooden elements, but also protect walls, floors, and poles from rodents.
Finishing an open veranda in a private house, photo
If the private house in which it is planned to build a terrace is located on the sea coast or on the shore of a reservoir, it would be an interesting decision to finish the veranda with polycarbonate - transparent walls will protect you from dampness on cool evenings, but will not interfere with wonderful views from there.
Usually summer premises do not need glazing, it is used only in the warm season, this seasonality does not provide for monolithic buildings or stationary cabinet furniture.
Light plastic models of chairs, tables, or transforming furniture are more suitable here. Wicker chairs, tables, rocking chairs, fresh flowers hung in flowerpots around the perimeter of the terrace perfectly create a themed interior.
Materials for the construction of the veranda
One of the fashionable solutions in construction today is the choice of a frame veranda.
For the construction of such a structure, laying the foundation, erecting the frame of the building will be required. Veranda finishing options are a matter of taste and possibilities, but the principle of creating a structure is almost identical.
You will need concrete pillars (to build a foundation), a wooden beam for building a frame, a crate along the perimeter for its lower part and finishing materials for interior decoration of the walls of the veranda (stone finish in the photo):
- wooden or plastic lining (pvc),
- polystyrene tiles,
- mdf panels,
- composites, stone, perforated sheet, metal, etc.
If you purchase brackets, corners, screws, anchors, tools, you can make a veranda with your own hands.
As a roof, wood, metal, profile sheet, metal tile, glass, etc. are used at will.
When finishing a closed veranda inside (a wooden roof in the photo), you need to take into account the degree of natural light, because the only communication that is needed here is electricity.
The floor will need waterproofing, and depending on the style chosen, the type of surface used, floor slabs or stone, beautiful quality linoleum can be laid.
You should not rely on the fact that a plank floor or laminate will be used, remaining the same spectacular, beautiful - if the option is open, summer, the interior decoration of the veranda in a private house (see photo) for the floor is also subject to dampness, humidity. Therefore, it is better to give preference to those materials that do not absorb moisture.
A perforated sheet for finishing the veranda inside will help divide the room into zones (for example, a dining area and a seating area), showing imagination, you can perfectly decorate the ceiling with it.
It is important in the interior decoration of the veranda to correctly calculate the lighting.
Wall decoration on the veranda inside
One of the popular ways to make a closed-type terrace not only beautiful, but also warm is to finish the veranda with plastic panels (you can see this option in the photo).
By itself, it is a lightweight structure, so the interior decoration of the veranda in the country (the photo illustrates one of the options), the ability to make windows without using a double-layer double-glazed window.
It will be much more effective to take care of the insulation of the floor and walls. Moisture-resistant gypsum boards are suitable as a finish inside the veranda in the country house; first, the walls of the structure should be hydrophobized on both sides: inside and out.
To insulate the walls, you can use mineral wool or extruded polystyrene foam. The interior decoration of the veranda (photo) is a gasket of insulation, which is carefully layered with a vapor barrier film, and MDF, drywall sheets are applied on top, reinforced with PVC panels or clapboard.
When choosing mineral wool as a heater, remember its moisture absorption, so that the insulation does not crumble into dust soon, provide waterproofing to the walls!
Wall panels for interior decoration for the veranda can be made of any material, even painted with decorative plaster. Wooden panels will look very impressive and respectable, but you need to remember that they need to be taken care of.
It is cheaper and more practical to finish the veranda with an imitation of timber (photo), even on an open structure, this type is preferable due to its durability.
Lining - one of the simplest materials, characterized by wear resistance, good qualities for wet rooms, undemanding maintenance.
The advantages of finishing the veranda with clapboard include its following qualities:
- The lining is easy to install, allows you to create a smooth, even wall due to its own texture,
- It is an excellent soundproofing material,
- Differs in durability and convenience of replacement of the damaged sites in case of need.
Finishing the veranda with clapboard inside (photo) gives great prospects in terms of choosing colors, neat and easy installation, but the disadvantage of clapboard is fragility, especially in the cold season.
Winter veranda glazing
Today it is fashionable to use extraordinary solutions in glazing, one of the ways to make your home aristocratic and sophisticated is the French decoration of the veranda (photo).
It is an installation of metal-plastic windows in various shapes and large sizes. If possible, stained-glass windows built into the French finish look good in the interior.
The decoration of the veranda and the porch inside, the design of which involves the use of natural materials, looks beautiful in stone or wood.
Finishing the veranda outside
A beautiful appearance for the veranda is the image of the owner of the house.
Stone, wood are classic options, carved wood in decoration looks especially beautiful and impressive. Cheaper, more practical, easier to maintain, finishing the veranda with siding (the photo illustrates this option).
Among the advantages of vinyl siding are high performance, a wide range of colors, ease of installation, affordable price. Horizontal panels make the building very aesthetic.
How to hem the ceiling on the veranda?
Some rooms in the house need a special finish of the floors due to the fact that the operating conditions of the materials here are very different from the standard ones. For example, when choosing how to hem the ceiling on the veranda, you need to consider that this site is essentially located on the street and the conditions here are different from residential premises.
Basic requirements for materials
In order for the design to please you as long as possible and not cause trouble during operation, it is necessary to select coatings with the appropriate characteristics.
The main requirements that the ceiling sheathing on the veranda must meet are as follows:
- Moisture resistance
- Strength
- In cases of self-assembly - ease of processing and installation
- Compliance with the appearance of the rest of the house
- Resistance to low temperatures in winter
- Affordable price for budget repairs
Particular attention should be paid to resistance to frost and moisture - even glazed rooms, as a rule, are not heated, and there is a lot of moisture in the street air, for example, during rain.
The remaining parameters are also important, but some assumptions are possible here, taking into account the personal preferences of the owners of the house.
Popular Options
If desired, finishing can be done in any way possible. However, the most suitable and popular options for what you can hem the ceiling on the veranda are:
Despite the fact that everyone is accustomed to seeing a stretch fabric exclusively in residential premises, it is also perfect for repairing open spaces, provided that textiles are selected, and not PVC film.
The film will not work, because it loses elasticity and cracks from frost.
Drywall, which is very popular in the design of residential spaces, is also better not to use.
Even its moisture-resistant variety will not be able to withstand the vagaries of the weather and will eventually absorb moisture.
What and how is the interior decoration of the veranda in a private house
This will affect the appearance of the surface in the most negative way - it will swell with bumps and become covered with ugly spots, after which, the structure will have to be completely dismantled.
Suspended panel solutions are very inexpensive and are in demand for repairs with a small budget. In addition, the installation of panels both on the frame and on a simple crate is very easy and quite within the power of even novice craftsmen.
Of the remaining materials, the most popular and suitable option for almost any design style is the usual lining.
It is affordable, easy to install and, after processing with special compounds, it will be able to withstand atmospheric phenomena.
Rare repair methods
If you want to pass for the original, then choosing how to sheathe the ceiling on your veranda, you can pay attention to one of the materials listed below.
They have not yet earned such popularity as the previous ones, but they look very original and are suitable for decorating this part of the house according to their characteristics.
In principle, there are a lot of finishing options. It is important to consider whether the room will be open or closed. For open verandas or areas with partial glazing, it is better to choose a finish with increased weather resistance and durability.
Completely closed areas can be decorated with less weatherproof materials.
Examples
If you do not see this or that finishing option with your own eyes, it is very difficult to decide on a specific type of design. Therefore, below are a few photo examples of what you can hem the ceiling on the veranda and how the coating will look like in the end.
Almost all of the options for finishing the veranda presented in this article can be done independently.
An exception will be a stretch ceiling, but, if desired, even such a coating can be installed by hand. The choice of a specific type of design must be carried out taking into account the appearance of the whole house, the available budget and the personal aesthetic preferences of its owners.
A modern country house is designed to provide the best living conditions in it. At present, all conditions have been created for this - an abundance of design solutions in housing construction, a lot of traditional and new proven materials.
One of the elements of private buildings is currently a terrace - a fully or partially open area, equipped with a roof. It allows you to fully feel like a part of nature, almost without leaving your home. About what materials and with what requirements the terrace can be finished, and will be discussed in the future.
Users often search:
Classic terrace design
Structurally, an extension to the house, called a terrace or veranda, is a podium raised above the ground on one of the types of foundation, and a roof made of some material, based on several support beams. According to the embodiment, such structures are divided into:
- open;
- partially closed;
- closed.
open veranda
This species is good when located on the leeward sunny side. Due to the absence of fences, there are practically no boundaries between the veranda and the surrounding space. It is better if the height of the floor of such a structure is small. This is especially true when living in a country house for children.
Photo: 3D project of a country house with a veranda
Due to the lack of complete isolation from the atmosphere, the operation of structures of the first and second types is possible only in the warm season. It is impossible to insulate them with high quality due to the design features, and it is quite difficult to completely protect visitors to such a terrace from the wind and raindrops flying inside.
Covered terraces
This type is most suitable for year-round use as an additional room. Even in winter cold, closed from wind and frost, you can enjoy hot tea while admiring the beauty of nature. At the same time, it is better to combine the interior decoration of the veranda with the insulation of all its walls. This will minimize the cost of heating the house as a whole.
Veranda finishing options
The manufacturing process of the described structures is not complicated and is quite accessible with your own hands, as is the decoration of the veranda inside or outside. Since the topic of the article involves a more detailed acquaintance with the second part of the work, we will consider them, focusing on the possible options, their features, advantages and disadvantages.
Currently, the lining of the veranda from the inside is performed using the following materials:
- lining wooden;
- plastic panels;
- MDF panels;
- cement plaster and cement-based artificial stone.
wood veranda trim
The classic option is the use of natural wood materials for wall decoration not only in the interior of the house, but also in outbuildings. The lining is distinguished by good appearance, ease of installation and low requirements for the quality of base preparation.
It is mounted on a crate of 40x40 mm bars with the help of special fasteners - kleimers, which grab the panels by the groove and securely fix them. Finishing details can be located vertically, horizontally or at an angle to the floor.
Thematic material:
For exterior decoration, the veranda can only be sheathed by installing the lining parallel to the soil with the ridges up to prevent water from accumulating in the grooves.
plastic finish
Also a fairly common option. It is better to trim a closed veranda with such panels. In this case, temperature differences are less sensitive to the material, which increases its service life.
Unlike wood materials, plastic is practically not afraid of water. Modern retail chains offer many options for both color and texture design of plastic panels.
Installation of plastic trim is easier than wood. Due to the considerable width of the panels, the process is faster.
It is convenient to fasten the trim parts to the crate using a construction stapler, hammering the staples into a wide shelf along the edge of the products. Plastic panels do not require further finishing of coatings, they are well washed with a damp cloth, dust does not settle on them.
Interior trim with MDF panels
Another common finishing material for interior work is MDF panels. Like the previous version, they are distinguished by a large working width, which allows you to perform sheathing quickly enough. For fastening to a crate made of wood, clamps are used, similar to those used when installing a wooden lining.
Due to the large number of colors imitating natural wood, stone and even leather, such an interior decoration of the veranda will have a very high quality look. With all the advantages, MDF also has a significant drawback - very low moisture resistance. In this regard, it is better not to use them for finishing open terraces. Otherwise, additional protection will be required in the form of varnishing on all sides of the panels.
Finishing the walls of the veranda with cement materials
In the case of using cement-containing building materials for the manufacture of a terrace - blocks with one or another filling, or bricks, it is better to finish the walls with mixtures or parts similar in composition.
Please note that gypsum-based plaster and gypsum artificial stone are not suitable for covering the walls of outdoor verandas.
Often homeowners are stopped by the high cost of cement finishing materials. At the same time, it is not difficult to make the required amount of original artificial stone on your own in a home workshop. By adding aniline dye, you can get a unique interior in the finished room.
Polycarbonate in the decoration of terraces
As already noted, the materials listed above used in the decoration of the interior of the verandas have certain disadvantages that limit their use. In recent years, more and more external walls and roofs of terraces are covered with polycarbonate - an artificial transparent material that allows you to get a closed space while maintaining visual contact with the surrounding nature.
There are two main types of this plastic:
- Cellular. Differs in the minimum weight, high light transmission, durability therefore it is often used for a roof of terraced roofs.
- Monolithic. Its properties are close to real quartz glass, but unlike it, it does not have such high brittleness. This determined its use in frame structures of a vertical arrangement - windows, doors, transparent walls.
Modern manufacturers are not limited to the production of colorless sheets. To create a soft shadow, we recommend using green, blue, red, yellow cellular polycarbonate for the roof. You can combine several colors, giving the whole design brightness and originality.
Sheathing the walls of the veranda with cellular polycarbonate is quite affordable for do-it-yourself work. To work, you need a minimum set of tools:
- knife for cutting - any construction knife will do;
- screwdriver
Polycarbonate installation technology involves the following list of works.
The installation of cellular polycarbonate on the roof of the terrace is carried out in a similar way. If there is a ridge - the junction of two roof slopes, use a special ridge profile sold in organizations selling sheets.
In the absence of cutting experience, cutting sheets to the required dimensions can also be performed by workers at construction bases.
As follows from our review, the amount of materials for terrace cladding is sufficient to make a unique structure. Before finishing your veranda with any of them, carefully study all the features of operation in a particular case.
Veranda for a country house - an extension is not required, but desirable. It is here that in the summer you can put a couple of rocking chairs, a small table and enjoy your morning coffee in the fresh air. Considering that the veranda is most often not heated and does not have full-fledged glazing, the interior wall decoration should be made with high-quality materials that are resistant to various climatic influences.
clapboard
Among all finishing materials, wood can create the most comfortable atmosphere for relaxation. For this reason, for the interior decoration of the walls of the veranda, both open and closed, lining is most often preferred. The material is made entirely of wood, has an attractive appearance. The coating is pleasant to the touch and exudes an equally pleasant woody aroma.
There are 4 classes of material on the market. The most expensive option is extra class lining. Its difference from other classes is that it is made by splicing several pieces of high-quality wood. Such a lining is great for the walls of a closed veranda, but you should not use it for an open veranda: under the influence of moisture, cracks can form in the places where the wood is joined. The cheaper classes of lining are A, B and C. All three classes are made from solid wood, so there are knots and minor defects on the material. Potholes on such wood are usually puttied during the production process. The difference between lining classes from each other lies in the permissible number of knots, potholes, resin pockets and cracks for a certain length. Class A lining is almost as good as extra class lining, but can be used for finishing on an open veranda. Class C lining is the most budgetary, but it will have the most defects, and therefore you should not expect durability from it.
The color of the lining directly depends on the type of wood from which it is made. Pine boards are amber, linden boards are pale beige, spruce boards are yellowish. The material does not rot, is resistant to temperature extremes and UV rays, and if necessary, damaged areas can be easily replaced.
The lining must be treated with an antiseptic, and then it can last you up to 20 years.
PVC PANELS
No less popular material for decorating the walls of the veranda is PVC panels. The cost of the material is low, the installation of the panel is quite simple. Maintenance of the coating is also simple: it is enough to periodically wipe the walls with a slightly damp sponge.
In addition to the budget cost, ease of installation and maintenance, the advantages of plastic panels include durability, resistance to high humidity and temperature extremes. Thus, plastic will be an excellent solution for finishing both open and closed verandas.
The range of PVC panels pleases with variety. There are panels that imitate wood, natural stone, fabric or a metal surface. In a word, there will be no problems with choosing the most suitable option.
Panels are attached to the frame with screws or nails. In order for the surface to "breathe", it is necessary to leave a gap of 2-3 cm between the ceiling and the wall.
The minus of the material, perhaps, is one - increased fragility. In order not to accidentally damage the PVC panels, you should place chairs and a table on the veranda not close to the walls.
MDF PANELS
MDF panels are widely used in home improvement and summer cottages. You can use this material for finishing the walls of the veranda, but only for its closed version. The reason for this is that when moisture enters the surface of the MDF panel, it deforms and loses its qualities.
The positive properties of the material include its strength, ease of installation and quite a budget cost.
DECORATIVE PLASTER
The choice of this type of finish opens up wide design horizons: decorative plasters come in a wide variety of textures and colors, besides, they can be used to create interesting reliefs due to the application technique. In this case, it should be taken into account for which type of veranda you need to choose the material: for a closed heated veranda, plaster for interior work is suitable, and for an open or unheated one, it is worth choosing a material from the range of facade plasters.
Decorative plaster is easy to maintain, tolerates moisture, temperature changes and mechanical stress. With its help, you can create many effects: plaster can perfectly imitate marble and any other stone, cork, wood and other materials.
So, we have considered the most convenient and practical materials for decorating the walls of the veranda. The choice of finishing methods is not very large, but this limitation is more than offset by a wide range and ways of using materials, so you can easily realize any of your ideas without sacrificing quality.
The vast majority of country and country houses are built with a mandatory veranda, whether heated or not. What a cottage without a veranda, a full-fledged living space, at the same time a place to store all kinds of utensils. After the construction of the building is completed, sooner or later you will have to decide how and with what to sheathe the veranda inside, so that it is inexpensive and beautiful.
Living in a barn-like room is uncomfortable, and spending extra money is out of hand.
Finishing material requirements
Before looking for material and a way to sheathe a veranda inside, you need to look at the conditions of the room, and only then look for suitable material inexpensively.
Let's focus on the main ones:
- Temperature and humidity indoors. It depends on which side of the house the veranda is located on, sunny or shady, whether it is possible to sheathe the walls inside with materials based on cellulose fibers, or you have to buy plastic, inexpensively and reliably;
- The frequency of people living in the house and using the premises. For a house in which a constant temperature is not maintained, and people live with long breaks in time, the problem of how to sheathe the walls inside turns into a question of dealing with water condensate;
- The age of the veranda and the entire building. It makes no sense to try to sheathe the walls inside the room until the processes of shrinkage of the foundation and the box of the building have ended.
In the simplest case, it is possible to sheathe the walls from the inside with a cement-bonded particle board, very inexpensive, practically not afraid of dampness, does not warp even with strong condensate. But from an aesthetic and practical point of view, most owners would like the lining inside the veranda, first of all, to be comfortable and safe for health, and only then it would be inexpensive and practical. Therefore, out of more than two dozen plating options, we will leave only the most suitable for the listed requirements.
Note! For a newly built wooden porch, it can be advised to perform a temporary sheathing scheme from a tongue and groove board.
How to sheathe a veranda with wall shrinkage, inexpensively and efficiently
Instead of traditional vertical boarding, you can sheathe the walls with horizontal stuffing on a cross crate. Get it cheap and practical. So that during shrinkage the finish is not torn off the walls, the board is stuffed with a maximum gap at the tongue-and-groove joint and the obligatory laying of insulation, for example, from foamed polyethylene.
After three or four years, the decoration on the veranda can be updated inexpensively:
- Remove the board, insulation and crate;
- Treat wood with antiseptic impregnation, stain and varnish;
- Lay the crate, insulation and sheathe the walls again, but with the correct gaps in the joints between the boards.
In this way, you can inexpensively sheathe any room in a house made of wood, a bathhouse made of timber. For brick and block buildings with much less shrinkage, the veranda can be immediately sheathed according to the finishing scheme.
Popular materials for sheathing the veranda
The modern market offers a fairly large selection of materials for decorative wall cladding, including verandas. The list of the most popular finishes usually includes:
- Lining, board, wooden lath;
- MDF or fiberboard, boards and panels;
- Plywood, OSB boards;
- Waterproof plasterboard sheets GKL;
- PVC panels.
All of the listed materials fit well into the interior of the walls of the room, do not swell with moisture and do not create a feeling of discomfort for the owners, therefore, in the question of how to sheathe a veranda inside an inexpensive photo, price and personal preferences and desires remain the determining factors.
To sheathe the veranda indoors really inexpensively, you will have to do more work yourself, and pay the bulk of the costs to purchase quality material.
But not all indoor conditions are the same. Often, before sheathing the veranda inside the photo, it makes sense to turn to a specialist for advice and clarification.
Material for a cold veranda
It is quite difficult to choose how to sheathe an unheated veranda inside. There are not many options for finishing that can be used inside a cold, unheated room. Most often, the list is limited to plastic panels, waterproof grades of OSB boards and coniferous lining.
The main problem that the owners of unheated premises have to face is condensate, which is regularly released on the surface inside the skin. Therefore, you should not try to sheathe the walls of a closed veranda with cellulose fiber materials, primarily fiberboard and MDF. Even when painted with enamels or varnished, they quickly swell, which leads to warping and breakage of fasteners.
PVC panels are considered the best option. They do not rot, do not absorb moisture, the choice of colors is simply huge, and all this wealth will cost relatively inexpensively when compared, for example, with lining made of oak or cedar.
If desired, the veranda from the inside can be sheathed with plastic with an imitation pattern of precious woods, natural stone, or just a plain color scheme that matches the interior of the room.
To finish with polyvinyl chloride, the walls of the veranda will first need to be sheathed with a supporting frame made of galvanized profile. Metal profile strips are nailed to the walls in increments of no more than 60 cm. The easiest way is to sheathe the veranda with vertical PVC strips, in this case the profile is nailed in horizontal rows.
The walls of the veranda facing the street, before being paneled, are insulated with isolon or foil polyethylene, this is inexpensive and effective. Internal warm walls can be sheathed with mineral thermal insulation with a gasket inside the vapor barrier layer. In this case, it will be necessary to organize additional ventilation of the room, since plastic, like glass, creates an increased level of humidity from the inside.
For summer cottages, the problem of condensate is especially relevant during the onset of cold weather. After the owners move out with the first frosts, a large amount of water vapor accumulates through the walls, they must be removed by flow ventilation until the low air temperature turns into frost on the walls inside the room.
The choice of polyvinyl chloride in order to sheathe the veranda of the house from the inside cannot be considered particularly successful. Plastic always remains a fire hazard; at low temperatures, an accidental push with a chair or a careless blow can lead to cracking of the material.
Therefore, if you manage to buy oak or larch lining inexpensively, it is better to sheathe the room inside with a tree that will last for several decades.
Finishing the veranda room with wood
Wood has always been considered the best material for any finishing work inside the veranda. The easiest way is to sheathe the walls inside the room with clapboard, both in an expensive version and relatively inexpensively, approximately at the level of PVC panels.
Standard lining is divided into four quality classes:
- Extra - the most durable and beautiful material, without a single knot or disturbance in the pattern of the fibers. Such a tree is used for expensive decoration inside the living quarters of the house;
- C-class is the cheapest, designed to sheathe a barn or utility room. Despite the fact that in the overall standings the work is inexpensive, due to the extremely low quality, it is not recommended to use verandas for interior decoration;
- Classes A, B allow some defects in the form of knots or even cracks, but most of them are located on the end of the plank. It is this lining that is best to sheathe the veranda.
Most craftsmen do not trust the information about the class indicated by the manufacturer on the packaging, most often the material turns out to be of lower quality than stated during the sale. Therefore, before sheathing the veranda inside with a clapboard, do not be too lazy to open and reject some of the planks in order to avoid marriage when finishing the walls.
In addition to the class, the material may differ in the shape of the front surface. Samples of the most popular profiles are shown in the figure. If you want to create the impression of a log vault and walls, you can sheathe the walls inside the room with one of the types of boards - a block house.
The clapboard sheathing technology practically does not differ from the technique used for PVC installation. Initially, the starting bar is laid, and then the lining boards are laid on the crate stuffed earlier. It is best to sheathe the walls of the veranda on staplers, without glue and self-tapping screws.
Larch is the most difficult to fit, but it's worth it. Even for the most comfortable veranda, it makes no sense to purchase cedar or ash if you need to sheathe the room quickly and inexpensively. The best option would be high-quality spruce or pine, which can be ordered inexpensively from a private carpentry, dried, polished front and waxed.
Even an open or unheated veranda can be sheathed with such a lining. A nice bonus is the smell of coniferous forest, which appears when the walls of the veranda are heated by the sun's rays.
Conclusion
The most budget option for facing the walls of the veranda will be made from wood-fiber panels or slabs. They are relatively inexpensive, and in terms of comfort, materials made from cellulose fibers are considered one of the best.
If the room needs to be made not only warm and comfortable, but also truly beautiful, then it is best to sheathe the walls with MDF boards. It will turn out inexpensively and beautifully, but it is worth remembering that the high decorative qualities of the plate are ensured by the glued polymer film, respectively, the vapor permeability of the material is much lower than that of fiberboard. All the work will be inexpensive, but there should be no places in the veranda that fall out of the ventilation zone, otherwise the accumulated condensate will quickly destroy all the work.
The veranda can become not only a comfortable, but also a practical room, but the owners should think about this in advance. There are several options for finishing, and they will be determined by the complexity of the upcoming work. Works are divided into internal and external. We propose to consider the most acceptable, from the point of view of costs, methods, methods and materials that are involved in facing work on the veranda. A secure and well-furnished space can become a favorite room for the whole family.
Subject to consideration of the option in which external finishing work is carried out, special attention should be paid to the choice of material. The requirements are the same for materials that are involved in external finishing work. No one is going to use paper wallpaper as a finishing raw material, which themselves will fall off after the first rain. The thing is that paper matter is not suitable for use from the outside. The list of requirements looks like this:
- Aesthetics, which will eliminate subsequent costs for the design of surfaces;
- Resistance to insects, fungus and mold;
- The ability to withstand some mechanical and physical stress, as well as damage;
- Durability;
- Frost resistance;
- The material must withstand significant temperature and climatic changes;
- The resistance of the upper layers to direct sunlight, which excludes the possibility of curvature and burnout of the coating;
- The ability to exist in a humid environment and endure snowfall, fog and rain.
classic veranda design
Structurally, the veranda or terrace attached to the house will be a small podium, which will be raised above the ground through the foundation of one of the types. Beams are used as support. Based on the options, the veranda can be:
- closed;
- partially closed;
- completely open.
Covered verandas
This type of design is perfect for everyday use, regardless of the weather outside the window. In addition, a veranda of this type can be considered a separate room that can be used. On frosty days, it is comfortable to read a book in a warm blanket in the room, or drink warm tea, enjoying the beauties that open outside the window. When carrying out interior finishing work, you should consider the full insulation of each of the walls. Thus, heating bills in the cold season will be significantly lower.
Partially enclosed veranda
Such a room will be protected from rain and at the same time remain as open as possible, thereby providing the necessary level of safety for family members. The characteristic features include the presence of fences, which are frame structures made of timber and other lumber. It is also possible to use bricks and blocks, which should then be additionally sheathed on each side. There is no complete isolation from the surrounding atmosphere, so the veranda will be used only in the warm season due to the features of the chosen design. Full protection from the wind is not provided, as well as obstacles to oblique drops from the rain. In the winter season, you will need to cover the room with a cloth or regularly rake out snowdrifts.
open veranda
Suitable only if the site chosen for construction is located on the sunny, leeward side of the house. The complete absence of any fences blurs the boundaries between the veranda and the house, expanding the available space. Making the floor high does not make sense, as the difference will be felt strongly. Such a construction is also relevant with the regular residence of guests on the territory of the house and children, who in sunny weather can equip themselves with a playground on the street and at the same time remain under the supervision of adults. Construction costs will be minimal, since few consumables will be required. The most stringent requirements are imposed on quality, since the structure will not have additional protection against moisture and bad weather and will remain outdoors all year round.
Arrangement of the ceiling surface
Before proceeding with the improvement of the ceiling of the veranda from the inside, all wooden elements should be covered with protective impregnations (antiseptic). After that, you should proceed with the installation of the base - the frame, for the manufacture of which you will need wooden blocks measuring 50x50 or 30x50. The beam belongs to the category of lumber, which also needs additional processing with antiseptic compounds. The bars are attached to the surface of the rafters (roof) by means of long nails or self-tapping screws. The fastening step will be 35-40 cm. Installation is carried out in a horizontal direction in order to avoid subsequent accumulation of drops and snow at the junction points. To check the quality of installation, a building level is used.
Waterproofing should be applied to the rafters, which will provide a proper indicator of the heat insulator of the finishing materials used and protect the structure from excessive moisture and precipitation. As a heat-insulating material can be used:
- Styrofoam;
- mineral wool;
- other well-known heaters.
Only after laying the heat-insulating material, you should proceed with the installation of the selected sheathing on the surface of the ceiling of the veranda. The easiest way to work with a wooden lining, the installation of which is carried out perpendicular to the existing bars from the frame. The material is nailed by means of galvanized nails directly into the highlanders. After finishing the surface sheathing with lining, the surface is sanded and covered with any of the available protective compounds, varnish or paint. When using PVC panels as a finishing material, the sequence of work will be as follows:
- To begin with, the initial profile is fastened directly to the crate (wooden), with the help of which it will be possible to join the individual panels to each other.
- Panel sheets are inserted into the grooves of the initial profile. For this, self-tapping screws or special (expensive) clamps are used.
- The next element of the panel is inserted into the groove, the fastening of which is carried out in a similar way.
- The sequence of work remains unchanged until the end of the material or work surface.
- Plastic material tends to expand when heated (sunlight). To avoid deformation in the future, gaps between the elements of 1-2 cm should be left.
As a finishing material when arranging a ceiling for a veranda, you can use MDF, siding panels. This option is recognized as the simplest, since the material can be purchased at any store that can offer many color and texture variations. For homeowners, variety and affordability are considered paramount. When using drywall boards for sheathing the surface of the ceiling, you will need the arrangement of a wooden crate. In this case, you should consider the option of subsequent use of a metal profile. Sheets are fixed to the profile by means of self-tapping screws. The finished surface is puttied, sanded, and then finished with any material classified as finishing.
Floor and walls of the veranda: arrangement
Finishing work aimed at improving the appearance of the floor and walls is classified as simple and does not require outside intervention (hiring workers). To begin with, a wooden frame is made on the basis of bars. Installation must be carried out with the utmost accuracy; a laser or building level is used for verification. If you plan to make the room suitable for use in cold weather, then you should take care of high-quality insulation. A waterproofing material should be laid in front of the insulation, which will help protect the selected finishing materials and the insulator from condensation and moisture accumulation. All wooden elements that are in the room must be treated with specialized protective compounds - antiseptics. Only after that the facing material will be fixed to the wall surfaces.
Particular attention is paid to the floor located on the veranda. The requirements and characteristics applicable to the finishing material will depend on the conditions of subsequent use. As a floor covering can be used:
- ceramic tile;
- laminated panels;
- massive board;
- terrace board.
The optimal choice is considered to be a decking board and a moisture-resistant laminate, which are better than others for arranging a terrace or veranda. In installation, they are simple, moreover, they are characterized as durable and not demanding in further care. It is possible to use such materials under the condition of arranging premises in which there is temporarily no glazing or it is not provided at all. In this case PVC panel or ceramic tile can be used as an alternative as more traditional materials. Linoleum can lie down, however, a type of moisture-resistant material is expensive, which is not justified given the existing performance characteristics.
External finishing works
After considering the materials that may be involved in the internal finishing work, it is necessary to deal with the varieties of materials that can be used in the behavior of the external finishing work of the veranda. It is possible to use ordinary lining, but the quality of the material does not speak in his favor. Despite the use of various impregnations and protective compounds, the tree will quickly deteriorate, losing its decorative properties with regular exposure to aggressive environmental factors. Annual treatments are expensive and can undermine the family budget. When using lining, you should pay attention to the fact that the installation is carried out in a horizontal direction, in which the groove spikes will be directed upwards. Fixation is carried out in several rows - from the side of the groove and the spike.
Siding
The most economical and easy-to-use finishing material used for exterior decoration.
In recent years, siding has been in great demand among finishing materials. Provided that a brick covered with decorative plaster was used for facing the house, the upcoming work in the form of framing the building with siding will fit perfectly into the existing ensemble. The most popular is vinyl siding. In addition to an acceptable cost, the material has excellent performance. The ease of installation also speaks in favor of vinyl siding. As a finishing material for facades, it is customary to use horizontal-type siding with lock joints placed on it.
Mounting technology:
- First you need to take care of the crate. For these purposes, a timber with a section of 40x50 mm or an uncut board is suitable. Across the entire working surface, the elements are fixed vertically in increments of 35-50 cm. Additional bars are arranged around the windows, as well as in the corners of the house along the edge located below.
- The starting profile is mounted at the bottom and attached to the crate by means of self-tapping screws. The location must be horizontal.
- It is the turn of corner profiles in external and internal corners, as well as around door and window openings.
- It is worth paying attention to the fact that the edges of the lower corner profile should be slightly lowered below the level of the starting rail by 0.5 cm.
- Now it is the turn of installation and preliminary cutting of the purchased vinyl siding panels. Cutting the material is not difficult. To do this, use an electric jigsaw, hacksaw or jigsaw for metal work.
- The panel is slightly bent in the center, after which the edges are inserted into the grooves of the corner profiles.
- After leveling the panel, the lower edge is brought into the starting bar.
- Through pre-prepared holes, the upper edges of the panels are fixed with self-tapping screws. The panels should not be pressed tightly against the surface of the crate. Oval holes are responsible for the free movement of the web along the mounted self-tapping screws when heated. A gap of several millimeters is left between the crate and the hat.
- The subsequent bar is carefully inserted into the corner profile, after falling into the groove it snaps into place, and then attached to the crate.
- Before mounting the last plank, the finishing profile is laid strictly according to the level. After that, strips of the required sizes are cut out of the siding sheet, inserted and snapped into the previous bar. The free profile is placed in the finishing profile.
- The veranda is ready. Appearance is excellent.
Over time, the vinyl will expand slightly as it heats up, so the panels should be 0.5 cm shorter than the wall.
Arrangement of an unheated veranda
When choosing the material that you plan to use for interior finishing work, you should consider many options. There are not many. The list consists of coniferous lining, OSB boards of waterproof type, plastic panels. The main problem that owners of unheated verandas will face is the formation of condensate that will form on the inner surface of the selected material. Structures containing cellulose or its fibers (MDF and fiberboard) should not be used. Even by coating the material with protective compounds, it will not be possible to exclude the swelling of matter from excess moisture. The panels will become skewed, which will lead to the subsequent breakage of the previously used fasteners.
In this case, PVC panels should be preferred. Such material does not lend itself to rotting processes, the choice of color is wide, the cost is acceptable compared to lining made of cedar or oak. If necessary, plastic panels can be used for cladding, which are painted to look like precious woods or natural stone. A plain surface will also look interesting. Everything will depend on the interior decoration of the room. When using PVC plates, a frame based on a galvanized profile is preliminarily equipped. The allowable step when attaching the profile strips to the wall surface will be 6 cm.
It is much more convenient and practical to sheathe PVC surfaces with strips arranged vertically. The profile will be equipped with horizontal rows. As an insulating material in the arrangement of external walls, foil polyethylene or isolon can be used, the cost of which is low compared to other materials, taking into account acceptable characteristics. Internal walls can be sheathed with mineral-based thermal insulation, provided that an auxiliary layer (located inside) consisting of a vapor barrier membrane is provided.
The room will need forced (auxiliary) ventilation, as plastic will create an increased level of humidity, as well as glass. In suburban areas, this problem is very common. To remove the accumulated moisture in the form of steam, you will need the arrangement of a flow-through type of ventilation. Otherwise, frost will form on the inner walls. For interior finishing work, PVC is not suitable in the best way. Plastic belongs to the category of flammable materials that break easily when carelessly hit in the cold. Low temperatures make plastic incredibly brittle. If possible, for the implementation of interior finishing work, natural wood should be used, the service life of which is calculated in decades.
Finishing a glazed veranda
When decorating the interior in a glazed veranda, you should follow the same rules as when arranging loggias. There is more space on the veranda, which provides more opportunities for applying various design tricks. In fact, verandas belong to the category of summer buildings, but no one forbids connecting several heaters or insulating an additional room. If the room is heated or insulated, then the choice of finishing materials will be wider. It is possible to install stained-glass windows, instead of a roof, a glass structure, due to which the room will become incredibly bright and cozy.
Many do not trust glass structures because direct sunlight can render almost any coating unusable after a while. However, over time, a solution was found and it became possible to use a special acrylic-based frosted glass. Wide and heavy curtains or blinds can act as an additional element. The design of the ceiling will directly depend on how the roof was built. In addition to natural wood, it is possible to use drywall, plastic, MDF as a finishing material, the surface of which, if desired, can be painted. Some prefer polystyrene tiles.
False ceilings will look no less attractive. Wall decoration can be done using different materials using different methods and technologies. Light colors are preferable, as they visually make the room spacious and bright. Tiles, parquet, carpet can be used as flooring. Upholstered furniture will not be superfluous, which will stand for years, provided that the correct finishing is carried out. Comfortable rest implies the presence of comfortable furniture and auxiliary accessories.
The choice of materials for covering the veranda is a responsible process, since further comfort during your stay in the room depends on the right decision.
And finally, video tips for sheathing the veranda with OSB boards:
You may also like:
What is the best insulation for a frame house in 2017? 
How to choose floor insulation in a wooden house in 2016?