A new achievement in the field of manufacturing materials for insulation - ultra-thin thermal insulation Armor of domestic production. The claim that the coating is the best of its kind for insulating both vertical and horizontal surfaces is not an exaggeration. The material really perfectly copes with the tasks assigned to it by manufacturers, justifying the trust of customers in all respects.
Thermal insulation in liquid form appeared on the Russian market a long time ago and is represented by a wide selection of materials. But, ultra-thin thermal insulation Bronya is not the most common material. This is a product developed by Russian scientists in terms of a number of technical characteristics that has no analogues!
The obvious advantages of the material include a whole list of properties:
- Thermal insulation paint is compatible with any type of surface, from plastic to metal and concrete, as well as equipment, air ducts and pipelines.
- The material has improved adhesive properties when interacting with propylene, metal and plastic, preventing access to water and oxygen after processing.
- The coating based on liquid thermal insulation is resistant to moisture and salt solution, protecting surfaces from temperature fluctuations and the effects of precipitation.
- The use of ceramic insulation in liquid form allows you to increase the level of anti-corrosion protection and reduce heat loss.
- The surface treated with liquid thermal insulation is protected from condensation.
- With the thinnest layer of the Bronya coating, thermal protection is equal in properties to brickwork one and a half bricks thick or standard thermal insulation based on mineral wool.
- You can apply paint on surfaces, regardless of their shapes and curves.
- A thin layer of thermal insulation does not exert a load on the surface.
- Ceramic Liquid Armor as a heat insulator will reduce the risk of damage to metal structures to almost zero during periods of unstable temperatures.
- The liquid layer of heat-insulating paint handles 85% of the radiant energy.
- If necessary, insulated surfaces are subject to inspection without any downtime during the repair work.
- Surfaces under the Armor layer are not exposed to ultraviolet rays.
- The process of applying thermal insulation is quick and simple due to the possibility of using an airless processing unit.
- A damaged coating layer is easy to repair.
- Surfaces treated with Liquid Armor are non-flammable.
- The insulation is completely safe, does not include toxins and volatile organic compounds.
- Resistant to chemicals, alkalis and salt solutions.
- Fire-resistant and explosion-proof.
- Heaters are sold at an affordable price with the lowest calculated thermal conductivity among all analogues on the market.
In a separate paragraph, it is worth making a wide scope of the Bronya liquid insulation. In addition to processing walls and roofs in residential buildings and apartments, the material is actively used for thermal insulation:
- metal surfaces of domestic and residential premises;
- warehouses and garages;
- heating systems;
- air conditioning systems;
- pipes with constant formation of a layer of condensate;
- thermal insulation of boilers, heat exchangers and steam boilers;
- ground and underground oil storage facilities;
- containers for water and chemicals;
- refrigerators and chambers;
- automobile tanks;
- subway cars and railway trains;
- court departments, etc.
Such a wide range of application of the material is made by its performance characteristics listed above, in particular, the temperature range from -60 to +250 degrees Celsius against the background of the period of use declared by the manufacturer over 30 years.
Varieties of liquid thermal insulation Bronya
The manufacturer offers several varieties of ceramic liquid insulation to solve a number of problems. The list of available Armor options on the market is below.
Ultra-fine thermal insulation "Standard" is presented as a base coat for economical treatment of surfaces and structures of any type with an increase in heat and sound insulation.
Paint "Classic" is also a basic modification of the coating with the main feature - excellent indicators of adhesive properties, regardless of the type of surface. Among all the types presented, it is one of the thinnest materials.
Anticorrosive coating is universal in its kind, guarantees the formation of a thin layer of insulation, which can be applied even on rusty metal surfaces. The material demonstrates excellent thermal insulation characteristics against the background of increased resistance to corrosion.
Paint "Winter" was specially developed for application on surfaces in the autumn-winter period at low temperatures. The material differs from other types of liquid insulation in its ability to perfectly evenly cover surfaces at temperatures up to -30 degrees Celsius.
Insulation "Facade" was created to process the outer walls of the facade in order to increase the level of heat and sound insulation. Apply paint with a layer of up to 1 mm in one treatment.
"Light" is a modern putty with thermal insulation properties, indispensable in the course of construction and finishing work, when it is necessary to level and at the same time insulate surfaces made of different materials with an operating temperature in the range from -60 to +150 degrees Celsius.
"Fire protection" - a composition for increasing the fire resistance of steel surfaces in industrial and domestic premises.
"Universal" is a heat-insulating insulation for processing any type of surface, the closest analogue of the "Standard" and "Classic" described above. The advantage of paint is the versatility of use and affordable price against the background of excellent heat-shielding properties and economical consumption.
Bronya Nord is another budget option for liquid thermal insulation with characteristics similar to those of the Winter coating.
Insulation "Metal" demonstrates properties similar to those of the "Anticor" coating, that is, it is also used for processing metal surfaces with different degrees of rust damage.
Anti-condensate PRO coating can be applied on surfaces with a high level of condensate without special treatment. Suitable for thermal insulation of pipelines, all kinds of equipment with a wet surface without shutting down during operation.
Liquid Armor: how to apply
It is most convenient to use an airless sprayer for liquid insulation. One processing allows you to apply a millimeter layer of material to the surface. Under such conditions, the consumption of thermal insulation does not go beyond the norm, there is no risk of a layering effect.
It is allowed to carry out work on thermal insulation using Armor at temperatures from -35 to +150 degrees Celsius - it all depends on the chosen grade of material. Before processing, the paint is kneaded in a container until a homogeneous consistency is formed with a small inclusion of distilled water.
- revolutionary technology of warming! Ultra-thin thermal insulation, which has no analogues in terms of thermal protection efficiency!
Thermal insulation paint Bronya
is able to change our understanding of the traditional methods and technologies of home insulation, thermal insulation of pipes and engineering equipment.Modern developments in the field of increasing the efficiency of heat-insulating materials have allowed scientists to create a truly universal heat-insulating coating that surpasses all known insulating materials in its characteristics!
Judge for yourself - only 1 mm of thermal insulation coating Bronya is equivalent in terms of thermal protection to 50 mm of mineral wool!
40 times more effective than foam or polyurethane foam, but these are not all the benefits of liquid thermal insulation.
Advantages of liquid thermal insulation Bronya:
- environmental safety, the absence of harmful impurities in the composition of the material
- fire safety, the absence of harmful fumes and gases, when the heat-insulating material is heated
- high efficiency of thermal protection with a small thickness of insulation
- durability, not subject to rotting and getting wet
- biological resistance, not susceptible to mold damage
- Easy to apply on all types of surfaces
- low cost
Ultra-thin heat-insulating coating Bronya is an ideal insulation of a new generation!
In the philistine environment, and among the builders themselves, there are a fairly large number of skeptics who claim that liquid ultra-thin thermal insulation is a product of the imagination of marketers. From the point of view of such "experts", a heat-insulating material with such performance indicators cannot exist in principle. Such skeptics should be reminded that just recently no one could believe that a man could fly into space, but it happened! Exactly the same revolutionary, breakthrough technologies are being developed in all areas of human activity, including the creation of the latest insulating materials, such as liquid insulation.
Superfine Thermal Insulation Bronya has proved its high efficiency not only in experiments and numerous tests in laboratory tests, in obtaining certificates from the leading institutions of the country, but also in practice, with practical use at hundreds of critical construction sites.Liquid thermal insulation Bronya is successfully used at the facilities of such giants as GAZPROM, RZD, ROSNEFT, LUKOIL, as well as in housing construction, housing and communal services, industrial facilities, etc. Getting more and more popular liquid insulation Armor and among private developers.
Those who have used Bronya heat-insulating paint at least once recommend it to all their friends as a unique heat insulator!
liquid insulation
highly effective for thermal insulation of building facades, roofs, internal walls, window slopes, concrete floors, hot and cold water pipelines, steam pipelines, air ducts for air conditioning systems, cooling systems, various containers, tanks, trailers, refrigerators, etc.
Technical characteristics of liquid thermal insulation Bronya:
. Coefficient of thermal conductivity
- 0.001 W/m °С (at +20°С)!
. Temperature range of application
from -60 to +250 °С
. Environmentally safe, non-toxic, do not contain harmful volatile organic compounds.
. High chemical resistance to alkalis, saline solutions, etc.
. Fire and explosion safety
.
Service life - more than 30 years
, without changing the insulating properties!
Areas of application for liquid thermal insulation Bronya:
- Insulation of walls, floors and roofs of residential and industrial buildings
- Thermal insulation of metal structures and structures
- Insulation of hangars, warehouses and garages
- Thermal insulation of pipelines of heating systems
- Thermal insulation of steam and gas pipelines
- Thermal insulation of air conditioning systems
- Elimination of condensate on pipes with cold water
- Thermal insulation of water heaters and boilers
- Thermal insulation of steam boilers and heat exchangers
- Insulation of oil pipelines - underground and surface, oil storage
- Thermal insulation of containers and tanks for storing water, chemicals, etc.
- Thermal insulation of refrigerating chambers
- Thermal insulation of refrigerators, automobile and railway tanks
- Passenger railway cars and subway cars (heat and sound insulation)
- Engine rooms of ships
- Internal surfaces of the hull of ships, submarines, boats, yachts, etc.
Range of thermal insulation coatings Bronya:
1. Ultra-thin thermal insulation Armor Standard - basic modification of ultra-thin thermal insulation coatings Bronya is the most economical option for thermal insulation of any building structures!
- 2. Thermal insulation paint Bronya Classic- the basic modification of an ultra-thin liquid-ceramic coating, which has excellent adhesion to any surface! The best ultra-thin thermal insulation you will ever work with!
3.
insulating coating
Armor Antikor- a unique ultra-thin heat-insulating coating, insulation paint, which can be applied directly to a rusty surface (it is enough just to remove loose rust with a metal brush).
Liquid thermal insulation Bronya Anticorrosive is a highly effective thermal insulation coating and anti-corrosion protection at the same time!
4. Thermal insulation paint Armor Winter - an unparalleled modification, specially designed for work in the winter at low temperatures. Unlike all other liquid ceramic coatings on the Russian market, Bronya Zima can be applied at temperatures as low as -30°C.
5.
Thermal insulation paint
Bronya Facade -
a unique heat-insulating coating that can be applied in layers up to 1 mm thick at a time, and has an increased vapor permeability of high-quality facade coatings.
- 6.
Heat-insulating putty
Bronya Light -
innovative heat-insulating coating, heat-insulating putty for construction and finishing works, designed for finishing leveling of internal and external surfaces made of concrete, brick, cement-lime plasters, gypsum blocks and slabs, gas and foam concrete, gypsum plasterboard, gypsum board, etc. , with operating temperature from -60 to +150 °С.
Heat-insulating putty Bronya Light is a unique building material based on the use of the latest heat-insulating components.
7. Flame retardant Armor Fire protection - a one-component fire-retardant coating designed to increase the fire resistance of steel structures and structures for industrial and civil purposes. Fire protection of metal structures can now be performed reliably and very simply - by ordinary surface painting! The fire resistance of structures in this case increases from 45 minutes to 120 minutes! Fire-retardant paint Bronya Fire protection is the latest development in the field of modern methods of fire protection of structures.
8.Thermal insulation coating Armor Wagon and Bronya Universal NG - Bronya Classic and Armor Standard.
The development of this modification of liquid thermal insulation was caused by the need to offer a cheaper alternative to the already widely known and popular Bronya Classic coatings. As a result, it was possible to obtain a heat-insulating coating with similar heat-shielding properties, but much more economical in terms of cost -20% cheaper!
9.Thermal insulation coating Bronya Sten and Bronya Sten NG - this is a budget ultra-thin thermal insulation that has similar characteristics to ultra-thin thermal insulation coatings Bronya Facade.
A cheaper alternative to the already well-known and sought-after Bronya Facade coatings. Our technologists managed to obtain a heat-insulating coating not only with similar heat-shielding properties, but also significantly more economical in terms of cost -20% cheaper!
10.Ultra-thin thermal insulation Bronya Nord and Bronya Nord NG - this is a budget ultra-thin thermal insulation that has similar characteristics with a thermal insulation coating Armor Winter.
A cheaper alternative to already widely known and sought after coatings Armor Winter. Thanks to new technology and innovative components, it was possible to obtain a heat-insulating coating not only with similar heat-shielding properties, but also significantly more economical in cost -20% cheaper!
11.insulating coating Armor Metal - this is a budget ultra-thin thermal insulation that has similar technical characteristics with the modificationArmor Antikor.
The development of this modification of liquid thermal insulation is caused by the need to offer a cheaper alternative to the already widely known and popular coatings Bronya Antikor. As a result, it was possible to obtain a heat-insulating coating with similar heat-shielding and anti-corrosion properties, but much more economical in terms of cost -20% cheaper!
12.insulating coatingBronya Anticondensate
PRO-
applied directly to the condensing surface!
Other news
Anti-condensate insulating coating Bronya Anti-condensate is designed specifically for use in construction, industry, reconstruction and repair of equipment. The uniqueness of the anti-condensation coating lies in the fact that it is applied directly to the wet surfaces of pipelines and equipment of various shapes that are in working condition, when it is impossible to stop the process or supply liquids through pipelines.
read
Recently, along with traditional heat-insulating materials, it has been in high demand. When coating surfaces, the substance simultaneously acts as an effective insulation, waterproofing agent and attractive facade paint, covering the walls with a uniform polymer layer.
One of the most effective in protecting concrete, metal, brick structures is ultra-thin. Moreover, the material can be applied both to internal and external surfaces, since its components are absolutely safe for health.
Manufacturer
Thermal insulation Bronya is produced by the Volgograd Innovation Resource Center. VIRC has vast experience in the development of high-tech thermal insulation materials.
All products offered by the company are distinguished by official certification, guaranteeing excellent quality and highly effective results.
Noting the manufacturer, one cannot fail to mention the optimal price-quality ratio.
Heat insulator brands
The manufacturer presents several basic options for a liquid heat insulator.
Bronya Classic is a versatile insulating agent that is ideal for processing traditional coatings.
Withstands high temperatures up to 200 °C.
Effective in isolating metal surfaces.
It can be applied directly to materials that contain signs of the development of corrosion processes, and without pre-treatment with anti-corrosion agents.
Facade
Bronya Facade - reliably insulates the premises from the inside, without interfering with the full circulation of air, which helps to avoid the appearance of rot, the formation of fungi.
Armor Winter
The mixture allows you to isolate objects at low temperatures down to -35 ° C.
Compound
Liquid thermal insulation includes the following components:
- acrylic binders;
- a composition of fixatives and catalysts;
- special additives, the presence of which contributes to the creation of protection against the development of corrosion, the appearance of fungus;
- ultra-thin ceramic microspheres filled with rarefied air.
The presence of such a combination turns the liquid insulation into an extremely light, pliable substance that reliably covers surfaces. In terms of consistency, liquid Armor is in many ways reminiscent of ordinary facade paint. However, after complete hardening, it forms an elastic polymer coating, which has high insulating and anti-corrosion properties.
Material qualities
Bronya thermal insulation prepared for use has the appearance of a viscous, relatively thick substance. The main part of the substance (about 80%) is formed by air-containing ceramic microgranules. In combination with acrylic polymer binders, the granules create a viscous mass that can be diluted with ordinary water, while creating a moisture-impervious, light and durable film.
As for the heat transfer coefficient, here this indicator is not more than 0.018 W / m2. At present, this is a record characteristic for liquid heat-insulating materials.
Insulation Armor practically does not absorb moisture. The index of its absorption at the full content of the insulator in water during the day is a meager 0.02 g / cm3. This quality shows how effective this substance is as a waterproofing agent.
The material is not combustible, and due to its complex chemical structure, insects and other small pests do not spoil it.
Liquid thermal insulation has excellent adhesion. The material effectively covers any surface: brick, concrete, wood, metal, plastic and even glass. The fully cured heat insulator transforms into the thinnest film, which, despite the meager layer width, reliably protects objects from thermal energy losses.
Another important point is the ease of application of the insulating base. You can cope with the task with the help of a conventional brush, roller, spatula or sprayer.
As for the consumption of a liquid heat insulator, in laboratory conditions this indicator is equal to one liter per 1 m2 when the substance is applied with a layer of 1 mm. Depending on the presence of certain conditions, the thickness of the insulating coating may vary.
Options
The technical parameters of the material are as follows:
- Appearance - homogeneous, even matte white surface.
- The resistance of the material to the effects of temperature changes is in the range from -40 to 60 ° C.
- The duration of the operation of the insulating layer when processing metal, brick, concrete surfaces in a temperate climate (for example, Moscow) is about 15 years.
- The water vapor permeability coefficient is 0.003 mg/m2.
- The maximum allowable operating temperature of the insulating coating upon reaching short-term peak performance is no more than 260 °C.
- The density of liquid thermal insulation at room temperature is 600±10% kg/m3.
- Hydrogen index - from 7.5 to 11 pH.
- The mass fraction of volatile substances is about 40%.
- The time required for complete solidification of the liquid heat-insulating layer at room temperature is no more than 24 hours.
- The level of adhesion to concrete, metal, brick surfaces is in the range from 1.3 to 2.2 MPa.
- Resistance of the insulating coating to water, 5% alkaline solution at room temperature - appearance and properties remain unchanged.
Applications
Liquid insulation Bronya is highly effective in insulating various structures. It is used for processing roofs, floor coverings, facades, internal partitions and load-bearing walls, window slopes, steam pipelines, ventilation, hot and cold supply pipelines, cooling systems, all kinds of plastic, metal, glass containers.
Laying technology
The dimensions of most coatings and the non-standard, complex architectural component of modern buildings increasingly make it impossible to effectively use traditional heat-insulating materials both inside and out. For example, not everyone can do a thorough insulation of a hinged facade using mineral wool, especially if the housing is located above the second floor.
With the advent of liquid thermal insulation Bronya, the situation has changed dramatically. The substance effectively fills any gaps in structures, while creating a coating, the thickness of which is some 2-3 cm.
To create a durable, and most importantly, reliable insulating coating, the liquid substance must be applied only after special coating preparation procedures have been followed.
Application of insulation
Ideal tools for high-quality, effective application of liquid thermal insulation are airless sprayers and soft brushes. During the application of the preliminary layer, no more than 1 mm of the substance is laid. The use of a phased economical approach contributes to the optimal consumption of thermal insulation, eliminating the formation of layers.
Work can be carried out at surface temperatures ranging from -35 to 150 ° C. The temperature regime in each specific case depends on the type and properties of the treated surfaces, as well as the brand of insulating substance.
Immediately before applying the finished mixture, it is worth once again mixing the insulating base in the container. If it is necessary to achieve a rarer consistency, a small amount of distilled water can be added.
Finishing
After the completion of the layer-by-layer application of the liquid insulator and the complete solidification of the substance, you can proceed to the final surface treatment.
After drying, the Bronya thermal insulation resembles a coating in the form of acrylic paint. Therefore, not wanting to spend extra time on facing surfaces, the walls can be left as they are.
If there are enough forces and opportunities for decoration, then a variety of finishing materials can be used for facing the frozen liquid insulation. As practice shows, a plaster layer, ceramic tiles, wallpaper is perfectly applied to such thermal insulation.
In any case, the service life of the Bronya liquid insulator, due to its strength and ductility, is decades. This, in turn, avoids finishing work for a long time.
Ultra-thin thermal insulation is supplied in the following containers:
Modification "Armor Classic" has a flammability group "G1". If you need a material with a flammability group "NG", then we offer you a similar modification "Bronya Classic NG"
Liquid ceramic thermal insulation coating "Bronya Classic" / "Bronya Classic NG" designed for thermal insulation of various surfaces (metal, plastic, concrete, brick, wood, etc.) that do not require increased vapor permeability.
Modification "Bronya Classic" / "Bronya Classic NG" highly effective in thermal insulation of various pipelines(hot and cold water supply, heating mains, steam pipelines, cooling systems, etc.), as well as ventilation ducts, autoclaves, ovens, boilers, boilers, cisterns, containers, containers, refrigerators etc. Thermal insulation coating "Bronya Classic" / "Bronya Classic NG" applied to various metal supporting structures for elimination of cold bridges and avoiding the formation of condensate.
This modification is film-forming and therefore it is recommended to apply it one layer at a time (not more than 0.5 mm thick) per day. For example, in order to obtain a thermal insulation coating "Bronya Classic" / "Bronya Classic NG" with a total thickness of 2 mm, it is necessary to apply 4 layers with a thickness of 0.5 mm each with an interlayer drying of 24 hours. Apply liquid insulation "Bronya Classic" / "Bronya Classic NG" paintbrush, spatula or airless sprayer Graco.
Laboratory consumption liquid thermal insulation "Armor" is 1 liter per 1 sq.m heat-insulated surface with a layer thickness of 1 mm. In case of volumes of application of liquid thermal insulation on a surface with an area of more than 100 sq.m, it is recommended to lay a 10% overrun if the application is planned to be carried out with a brush or spatula. From 10% to 30% (depending on the professionalism of the painter and weather conditions) may increase material consumption when applied by airless sprayer.
Application works thermal insulation coating "Bronya Classic" / "Bronya Classic NG" it is recommended to produce at an ambient temperature of at least +5°С and a temperature of the heat-insulated surface from +7°С to + 150°С. (The first layers are applied to the surface with a temperature above +60°С fifty%)
After the material dries completely and polymerizes, the formed heat-insulating coating can be operated at temperatures from -60°С to +200°С.
Based on modification "Armor Classic", produced using only imported raw materials, budget modifications are made and. Budget modifications are similar in their thermal properties to the basic modification "Classic", but have limitation of peak maximum operating temperature +140°С.
Instructions for the use of the material can be found in the section
The term "ultra-thin thermal insulation" refers to a group of paints filled with ceramic microspheres with rarefied air inside, most often acrylic-based. This insulation has unique characteristics: with a minimum weight load, it completely covers building structures, while protecting them from moisture and corrosion. Recognized leader in this field - paints and suspensions Armor of domestic production.
It is a homogeneous suspension of white color, forming after drying a matte film with high density and resistance to most external influences. The insulation effect is achieved due to the preservation of heat inside the ceramic granules, elasticity - due to the acrylic base, other parameters - by the introduction of catalysts, anti-corrosion and antiseptic additives. Depending on the intended purpose (specific functions are indicated in the table below), cost and properties, 11 modifications of Bronya thermal insulation compounds are distinguished:
- Basic: Classic, Facade, Winter, Anticorrosive.
- Budget: Station wagon, Wall, Nord, Metal (brands with similar characteristics, but cheaper).
- Specialized: Standard, Light, Fire protection.
The main technical characteristics of thermal insulation:
- The coefficient of thermal conductivity is 0.0012 W / m K according to the manufacturer's statement.
- Vapor permeability - 0.001 mg / m h Pa for Bronya Classic, Antikor and 0.013 for brands that are recommended to be purchased for thermal insulation of facades and walls.
- The average density of the composition is 0.558 g/cm3.
- Frost resistance - up to 50 cycles without changing the appearance of the coating.
- Combustibility group - NG and G1, depending on the form of release.
- Adhesion to the base: 1.33 MPa - to cement mortars and concrete, 2.04 - to brick, 2.3 - to metal.
- Standard operating temperature range: from -60 °С to +200 (up to 140 for budget modifications).
- The service life of Bronya insulation is at least 15 years.
The consumption of liquid thermal insulation declared by the manufacturer is 1 liter per 1 m2 with a thickness of the applied layer of 1 mm, reviews confirm it. This indicator strongly depends on the quality of preparation and evenness of the working base. The minimum drying time for a thin layer of Bronya paint is 1 hour, it takes a day to fully harden.
Due to its high adhesion, ultra-thin thermal insulation is optimal for insulating pipe lines, metal containers and surfaces, according to reviews in this regard, it is better and more convenient than rolled mineral wool. The scope of application is practically unlimited and includes horizontal, vertical and inclined structures inside and outside residential and industrial buildings. Bronya paint is recommended to buy for thermal insulation of slopes, facades, roofs, floors, ventilation, water heaters, tanks, cold rooms and similar objects. According to reviews, the maximum effect is achieved when insulating hard-to-reach and space-limited systems, including underground ones.
Work begins with surface preparation: removal of loose areas, old coatings, rust removal, degreasing or dedusting. This insulation has good adhesion to any building materials, but laying on an uneven or unstable base unnecessarily increases consumption. The paint holds better if the plane is pre-treated with Bronya primers. The composition is applied to clean and dry structures using an airless sprayer with a pressure of 60-80 bar or a brush with soft natural bristles.
Immediately before installation, the liquid thermal insulation is mixed (by hand or with a construction mixer) and, if necessary, diluted (exclusively with distilled water). The process requires care, it is important to leave the microspheres intact. The volume of liquid introduced is limited: with manual painting, it should not exceed 5%, with mechanized - 3. The same applies to external parameters: when carrying out thermal insulation work in conditions of high humidity, it is better not to dilute the paint with anything. Ignoring these requirements leads to an increase in the drying time of the layer and is considered a violation of technology. An exception is made only for preliminary application (when the main Bronya composition is used as a primer), in this case up to 30% of water is introduced.
The specific conditions of work and the recommended layer thickness depend on the brand, but it is better to apply an ultra-thin coating of thermal insulation several times than once, but thickly. According to reviews, to achieve the correct subtlety, you need to perform quick and short strokes. The number of layers of insulation Armor is determined by a special calculation, but at least the optical thickness should be reached (0.5 mm, walls or structural elements do not shine through the paint), the maximum is 6 mm. Each subsequent layer is performed only after the previous one has completely dried.
Overview of reviews
“I bought Bronya Universal heat-insulating paint when insulating a balcony, it took me 15 liters for 14 m2. I applied it after sealing the cracks, in one layer with an ordinary soft brush. The thickness was no more than 1 mm, which helped to save space. Condensation does not accumulate on the walls of the balcony, the material protects well from heat loss.
Roman, St. Petersburg.
“I used Bronya Sten brand liquid insulation to insulate an extension in a private house, I am completely satisfied with the result. The material withstood the winter without condensation and frost, the room retains heat better. The paint is expensive, but it is used economically, on average, 1 m2 will cost 500 rubles, but there is no need for additional protection.”
George, Moscow.
“I advise you to buy Bronya paint for insulating window slopes from the outside, any brand will do. It well withstands exposure to ultraviolet radiation, additionally isolates the opening from heat loss, moisture penetration and partially from extraneous sounds. Personally, I applied it to the plaster, but a plastic slope is also suitable, the adhesion of this type of insulation is very high.
Alexey, Moscow region.
“I worked with Bronya Antikor thermal insulation last summer, used it to protect ventilation ducts and a heating pipeline between two houses with a common boiler. I didn’t notice any flaws in the paint, in my opinion, the coating copes with the task better than rolled heaters and at the same time it looks neat.”
Eugene, Volgograd.
Price
| Name of modification of liquid thermal insulation | Main purpose | Volume, l | Price, rubles |
| Classic | Thermal insulation of surfaces that are not demanding on vapor permeability | 5 | 1960 |
| 10 | 3870 | ||
| 20 | 7540 | ||
| Standard | The same, but subject to the limitation of the upper temperature limit of operation to 140 ° C | 5 | 1780 |
| 10 | 3510 | ||
| 20 | 6820 | ||
| station wagon | 5 | 1450 | |
| 10 | 2900 | ||
| 20 | 5800 | ||
| Facade | Heat-insulating coating with increased vapor permeability for indoor and outdoor use | 5 | 2100 |
| 10 | 4160 | ||
| 20 | 8120 | ||
| Wall | Paint that forms an ultra-thin breathable film (up to 1 mm) that protects structures from freezing, condensation and heat loss | 5 | 1590 |
| 10 | 3190 | ||
| 20 | 6380 | ||
| Light | Putty composition Bronya with highly porous nanogel with enhanced heat and sound insulation properties | 5 | 1200 |
| 10 | 2400 | ||
| 20 | 4800 | ||
| Anticorrosive | Paint for protection and insulation of metal structures | 5 | 2290 |
| 10 | 4530 | ||
| 20 | 6660 | ||
| Metal | The same, but at operating temperatures ranging from -60°C to +90 | 5 | 1740 |
| 10 | 3480 | ||
| 20 | 6960 | ||
| Winter | Line for work at sub-zero temperatures | 10 | 4280 |
| 20 | 8560 | ||
| North | Budget modification of thermal insulation Bronya Zima | 10 | 3700 |
| 20 | 7400 | ||
| fire protection | In addition to the warming effect, it is used to create a non-combustible coating. | 7 kg | 2260 |
| 14kg | 5280 | ||
| 25 kg | 9420 |