Fighting sewer blockages. Recommendations for effective cleaning of sewer pipes

You can call the emergency service to deal with a sewer blockage by calling +7 495-645-77-22. To eliminate problems such as sewer blockages, the company’s professionals use effective methods:

• Hydrodynamic, in which cleaning is carried out using a jet of water under pressure.
• Mechanical, in which they are used various settings– drilling, pneumatic, root cutting, and other equipment.
• Thermal, consisting of flushing the sewerage system with a jet hot water, the temperature of which can be one hundred twenty degrees.
• Chemical, which consists of using special preparations that dissolve growths and various deposits through chemical reactions.

The greatest efficiency is achieved by combining these methods, which are perfectly mastered by the specialists of the company “Prochistim-truby.rf”. Depending on the specifics of the problem, specialists will determine the most effective methods, efficiently and quickly eliminating blockages of any complexity.

Such familiar amenities of civilization as a water supply and sewerage system are perceived as an integral part of comfort. And if the Roman Empire went down in history as progressive partly because it was there that sewers were built in the 7th-6th centuries, today such achievements are perceived with a condescending smile. Spoiled by all sorts of technical innovations, users of all kinds of benefits do not think about the fact that it is simple things that serve as the basis for daily comfort.

The most telling example of this significance is the problems that arise in the work of engineering communications: a banal sewer blockage can disrupt the usual rhythm of life. Will need urgently look for competent performers, agree on deadlines for completing the application, understand technical nuances. Not to mention the fact that in the most critical cases, in emergency situations that can lead to property damage, unscheduled repairs will be required own apartment or compensation for damage to affected neighbors.

It is in such cases that it becomes obvious how important it is to maintain the efficient operation of sewer systems, their timely maintenance and cleaning. Experts recommend taking urgent measures at the initial signs of sewer blockages, which boil down to high-quality cleaning of the pipes. In some cases, these measures can be carried out independently, but most often you may need the help of professionals who have experience and special equipment.

Residents apartment buildings, owners of private cottages or co-owners manufacturing enterprises who have had the opportunity to evaluate the performance of specialized emergency services, cooperate with such companies on contractual terms. This allows you to enlist the support of experienced specialists who will provide a full range of services around the clock: scheduled maintenance of water supply and sewerage systems, prompt elimination of any problems with engineering communications, including sewer blockages.

Elimination of blockages in sewer systems of enterprises.

Sewage systems, according to their purpose, are industrial, intended for the discharge of waste from enterprises, industrial Wastewater and industrial waste, and household waste intended for draining wastewater from household devices sanitary and technical purposes (kitchen sinks, bathtubs, toilets, washbasins). All of them need cleaning, which is best done as planned in order to avoid serious problems in the form of accidents. It is much easier to prevent a sewer blockage than to spend a lot of time and effort to eliminate it, urgently look for specialists and incur financial losses by overpaying incompetent performers.

Every day, it enters the sewer through the drain. dirty water, small particles of organic matter, grease and household waste that does not linger on the drain grates. As a result, a layer of sediment accumulates on the walls of the pipes, which over time blocks the clearance in the sewer pipe and ultimately completely clogs it.

The first sign of a violation of the normal functioning of sewer systems is an unpleasant odor from the drain holes kitchen sink or sink, bathtub or washbasin. This indicates that a large amount of fat and protein deposits have accumulated in the siphon or on the walls of the pipes, which need to be removed. The second sign is a slow leak of water into the drain of the bathtub, sink or sink. If you ignore these warning signs, a third sign will appear - a complete blockage of the sewer pipe, when all its contents will pour out.

That is why timely cleaning of sewer systems will avoid serious problems, relieving you of stress and material damage. The company "Prochistim-truby.rf" provides high-quality services aimed at effective work engineering systems, including the removal of sewer blockages of any complexity, 24-hour emergency services and comprehensive maintenance. The presence of many years of experience and material and technical base allows us to provide qualified assistance to owners of apartments and private houses, industrial enterprises, office and shopping complexes.

Compliance simple rules operation of sewerage and water supply systems will allow you to avoid various force majeure events. Periodic cleaning of pipes will ensure uninterrupted and efficient operation, and at the first sign of a sewer blockage, urgent measures should be taken to eliminate it. It should be noted that it is easier to prevent any problems in the operation of engineering systems than to subsequently eliminate blockages, however, even the most far-sighted people are characterized by a certain carelessness, so knowledge of simple ways to remove blockages comes in very handy. In any case, if the situation is not very critical and the resulting blockage is not too complicated.

To determine the severity of the problem, the nature of the problem must be identified. If water has stopped draining in all sewer units - in the sink, bathtub, toilet, then on our own there's no way around it. IN multi-storey buildings The riser on the first floors often becomes clogged, the water stops flowing and begins to rise up. In this case, it is necessary to call specialists who will provide high-quality cleaning using special equipment and effective methods.

Types of sewer blockages:

• operational blockage resulting from the deposition of fat on the walls of the pipes, to which various wastes begin to stick - hair, small particles that fall into the sink through the drain.
• mechanical blockage, often caused by a tenant who does not comply basic rules operation of engineering systems. For example, a clogged toilet could be caused by toilet paper, which is flushed down the toilet every day and is not corroded by water, as a result of which it accumulates and leads to obstruction of the pipes. This type of blockage can be removed using special means, which corrode paper and other accumulated debris.
• obstruction in the siphon - a device designed to serve as a kind of barrier, a filter protecting from unpleasant odors from the sewer. Over time, fatty deposits accumulate in the siphon, to which debris sticks, which ultimately leads to the formation of a sewer blockage. To clean the siphon, use hot water with the addition of dishwashing liquid: this breaks down grease and removes dirt accumulated on the walls.
• man-made blockage is the result of errors in the design of sewer systems. Such a blockage cannot be eliminated independently; it requires special equipment, and in the most critical cases, serious design changes.

You can clear a clogged drain accessible ways, among which:

• hot water with the addition of baking soda, which can be used to dissolve the fat accumulated on the walls of the pipes and get rid of the blockage;
• chemicals that have a caustic composition that breaks down fat and solid particles;
• a plunger, thanks to which you can organize movement in the pipe and move the resulting blockage.
• steel plumbing cable, which should be advanced to the point of blockage with a twisting motion. This device helps solve the problem in 90% of cases, although its use requires some skill so as not to damage the pipe or break the cable, which will be difficult to remove on your own.

Turning to the specialists of “Chistim-truby.rf” will provide a number of advantages:

• efficiency and high quality;
• comfortable payment system - the order is paid upon delivery, so that the company’s clients are confident in the integrity and responsibility of the specialists;
• reliability - all types of work are guaranteed;
• high level of competence of specialists;
• affordable prices;
• promising conditions for cooperation on an ongoing basis;
• impeccable service.

The company’s specialists are ready to go to the site within ten minutes after the client’s call, providing professional assistance, innovative equipment and effective methods to solve any problems related to the functioning of utilities.

Probably, many in their lives have encountered such an economic necessity as cleaning sewer pipes. The main reason why blockages form in pipes is the accumulation of household waste: hair, soap, fat, etc. There are simple ways self-cleaning of sewer pipes using basic tools and available materials. At the right approach You can remove blockages with your own hands, without seeking the help of qualified plumbers. How to do this, read our article.

How to properly remove blockages

Use of household products

To self cleaning sewer pipes was effective and fruitful, you need to act in this sequence ( recipe No. 1):

1. Clear the drain hole of accumulated debris. You can pour 1 liter of boiling water into it and leave for 15 minutes.
2. Apply the plunger.
3. Pour 1 cup of soda into the drain hole and fill it with boiling water in a 1:3 ratio.

The described procedure can be repeated several times if necessary. Baking soda forms sewer pipes alkaline environment, facilitating easy removal of blockages. It will not only clean the inside of the pipes, but also disinfect the pipes and sink.

You can use another method of dealing with blockages ( recipe No. 2):

1. Pour baking soda into the pipes in equal parts (½ cup each) and pour table distilled vinegar.
2. As a result of mixing substances, a chemical reaction will occur, accompanied by the formation large quantity foam. In view of this, it is recommended to close the drain hole with a stopper and leave for 2 hours.
3. After the specified time has passed, remove the plug and pour a little boiling water into the pipes.

By using this method deposits on the inner surface of the pipe are dissolved, and powerful cleaning occurs.

Cleaning sewer pipes is also possible using salt and soda ( recipe No. 3):

1. Pour the ingredients (½ cup each) into the pipes through the hole.
2. Add boiling water and leave for 8-10 hours. During the specified period of time, do not allow anything to flow into the pipe.

As you know, it is better to prevent a disease than to treat it. The same goes for sewer blockages: periodic maintenance removes accumulated waste and does not give it the opportunity to “grow” into big problem. To prevent the formation of blockages, it is enough to sometimes pour boiling water into the pipes; it dissolves soap and grease.

Or you can use this method ( recipe No. 4):

1. Combine 1 cup salt, 1 cup baking soda and ¼ cup cream of tartar. After thoroughly mixing the components, place the mixture in a tightly sealed container.
2. Periodically pour the mixture into the hole and fill it with boiling water.
3. After 1 minute, rinse the drain with cold water.

Chemicals

In addition to homemade mixtures, there are other ways to clean sewer pipes. On the shelves of modern stores you can find many ready-made chemicals, helping to deal with blockages in pipes: from the affordable “Mole” powder produced in Russia to expensive gels produced in Germany. If you are in doubt about what to use to clean your pipes, know that in the fight against grease blockages, any of these products will be a winner. The main thing is to read the instructions on how to clean the pipes with the chosen preparation.

On the label of its products, the manufacturer indicates that it is enough to pour the substance into the pipes and wait for a while.

Pro tip:

However, in practice it often turns out that this is not enough and the use of a plunger is additionally required. With its help, the clog dissolved by chemical reagents leaves the pipes and goes into the sewer system.

Plunger in the fight against blockages

An ingenious invention of mankind, the plunger, can easily be called the most effective means of combating blockages. A plunger is a manual and most popular plumbing equipment for cleaning sewer pipes. It perfectly clears clogged pipes coming from the sink, bathtub and toilet from blockages. The principle of operation of the device is a double action on garbage:

• strong pressure at which the blockage begins to move inside the pipe;
• destruction of the blockage.

When accumulated waste breaks down, it sometimes comes out of the pipes and can be easily removed.

A positive result in eliminating blockages is achieved only if you know how to clean pipes with a plunger correctly.

This is done like this:

1. If there is an overflow hole in the pipeline, close it tightly (with a lid, rag, etc.) to prevent the pressure on the blockage from being reduced.
2. Place the plunger over the drain hole and press the rubber part firmly against it. When working through a clog with a plunger, make sure that the water level in the sink (bathtub) is above the rubber valve.
3. Make rhythmic forward movements with the plunger without lifting the rubber element from the drain of the sink (bathtub, toilet).
4. Pull the plunger sharply away from the hole.

Cleaning sewer pipes using a cable

Cleaning cable

It happens that a blockage has formed in the depths of the sewer, and you do not know how to clean the sewer pipes. Then specialized equipment will come to the rescue.

The most common and accessible view One such plumbing tool is a flexible shaft or cable for cleaning sewer pipes. It is made of steel wire and is an elastic but easily bendable long spring. At one end of the flexible shaft there is a metal handle for ease of use, at the opposite end there is a spiral that serves to secure various replaceable attachments (scraper, brush, hook, etc.).

Instructions for use of plumbing cable

• visual inspection of the instrument - allows you to identify a violation of integrity;
• checking the reliability of the handle;
• if necessary, lubricating the bushings that make up the handle;
• quality control of installation of replaceable nozzles (if any).

If you are convinced that the hose is working properly, proceed to cleaning the pipes:

1. Taking the handle in your hands, guide the other end of the cable into the sewer pipe. In this case, the siphon can be removed from the sink, this will improve the quality of pipe cleaning.
2. Commit rotational movements cable, trying to push the shaft as deep as possible. Translational movements allow the tool to quickly and without interference overcome existing obstacles sewer pipeline bends and knees. However, putting too much pressure on the cable may cause it to break or damage the inside of the pipe.

Pro tip:

When you need to give a large torque to the plumbing cable, rotate the handle strictly clockwise. Otherwise, the flexible shaft may break and unravel.

1. Having felt the blockage, increase the intensity of rotation of the cable: this will push the debris through. If the flexible shaft has a hook attachment, hook the debris and pull it out.
2. As soon as the water begins to flow down the drain, turn on the hot water. Flush the pipes with a weak stream of water, gradually increasing the pressure.
3. Evaluate the result: if a funnel forms when draining the water, the sewer system has been cleaned correctly.

Pro tip:

It happens that a plumbing cable gets stuck in a sewer pipe. In this case, slowly rotate it to the left or right until you overcome the obstacle.

Most often, at least one of the described techniques allows you to cope with something clogged in the pipes. household waste. However, if you have tried all cleaning methods, but the blockage is still not removed, contact a specialist for help. Plumbers, as a rule, have more powerful methods of cleaning sewer pipes, capable of flushing pipes under high pressure and removing the most difficult blockage. In addition, masters have specific skills and know what manipulations are best to use.

Anyone in their apartment may experience such a nuisance as clogged pipes. To combat it, you can use a wide variety of means: a proven plunger, plumbing cable, soda ash or chemicals with acids and alkalis. For those who cannot tolerate various types of chemicals, you need to take drugs with bacteria, then you don’t have to be afraid of allergic reactions.

But the most important thing is prevention, which needs to be carried out on time, and maintaining cleanliness.

How to choose ideal remedy from clogged pipes? Let's consider this issue in more detail.

Why does blockage occur, how to avoid this problem?

The problem of clogged pipes is familiar to every homeowner. Why does it occur, and for some people constantly:

Before you start cleaning the pipes, the most common questions arise: “What can I use to quickly and effectively clear the blockage?”, “Which product is the best?”, “Will the drug damage the pipes?”, “What is better to buy: gel or solution?". Let's look at the basic tools that will help you quickly solve the clog problem that has arisen.

In total there are 4 main types of funds:

What are they made of?

Any product always contains alkalis and acids. Alkali perfectly dissolves any fats and accumulation of small debris. These products are ideal for the kitchen sink.

The acid composition is used to remove soap scum and lime deposits. This product is ideal for the bathroom.

One of the most frequently asked questions is: “Is this acidic or alkaline cleaner harmful to the pipe?” As a rule, such preparations are created by chemists who have studied in detail any effect of the products on pipes made from the most various materials. Therefore, before you begin cleansing, you need to read the instructions. In it you can find the answer to the question posed: “Is it possible to use this tool For PVC pipes or metal?"

You cannot increase the time of action of the drug on the blockage, otherwise you will have to start unscheduled pipe replacement.

Be sure to read the instructions! This is necessary for correct and safe work with a chemical!

Rating of the best anti-clog remedies

The most famous and widely available remedy. Its effectiveness has been proven for a long time. This substance is currently available in various types: gel, granules and liquid. This alkali-based product removes grease and debris well.

Rules of use:

1. Bring at least 3 liters of water to a boil and pour this amount into the clogged pipe.
2. Mix the liquid well and pour 250 ml into the pipe opening.
3. Don't touch anything for 3 hours.
4. Rinse off the product with water by turning the tap.

In some cases, the water continues to drain with difficulty. Take a plunger and push the now soft remaining dirt out.

Its contents: sodium hypochlorite, chlorine bleach 5 - 15% and nonionic surfactants.

Application:

1. Bring 3 liters of water to a boil and pour into the drain.
2. Fill half of the special glass with Tiret.
3. Pour into the drain hole. Depending on how severe the blockage is, the action time is up to 35 minutes.
4. Rinse again with boiling water.

The disadvantages of "Tiret" are the pungent odor, high consumption fluids and not always a positive result.

An excellent product that is ideal for plastic pipes. The advantage is convenient packaging. One sachet weighing 60 grams is required at a time. Homeowners consider the main advantages of the product: convenience, good effect and inexpensive price. If you purchased a red sachet, its contents dissolve in hot water. Cool water is also perfect for green packaging.

It contains: caustic soda, sodium nitrate, dyes and fragrance.

Application:

1. Open the bag and pour into the drain hole.
2. Pour 250 ml of boiling water there.
3. Wait 15 minutes and wash off the remaining dirt and grains of the substance with boiling water.

Prohibited for use in toilets. When working with Floop, you must follow safety precautions. The product may splash upward and get into your eyes. Another drawback is the strong unpleasant odor.

This product only takes 3 minutes to effectively remove the most difficult clogs. You need to be very careful when working with it. As soon as the product enters chemical reaction, it is ejected to the surface. Do not lean over the sink, as the smell of the substance can be harmful to health. Do not go beyond the dosage and recommended time.

It contains only 2 components: sodium hydroxide and surfactant.

Operating instructions:

1. Remove accumulated liquid from the sink using a syringe or a regular rag. 5 cm - permissible distance from the mesh to the water level.
2. Pour 100 grams of the substance into the drain.
3. Leave everything alone for 3 minutes.
4. Pour 250 ml of hot water into it.

Disadvantage: very caustic. Be careful not to get the product on adjacent surfaces, especially corrugation and enamel.

A very popular remedy among housewives. It is ideal for removing any blockages in the drains coming from the kitchen or bath. This soft solution will not harm expensive plumbing fixtures and pipes made of plastic and metal. It does not have a pungent odor, but the result takes a long time to arrive.

It contains: sodium hydroxide and filler.

Usage:

1. Remove all water from around the drain.
2. Pour the contents of the sachet into the drain or sink.
3. Wait half an hour. After this, pour a glass of hot water into the pipe, then turn on the tap and rinse the drain thoroughly. If the plug is large, the contents are left for 12 hours.
4. If there is no effect, cleaning must be repeated.

The disadvantage is too high price Mr Muscle.

For those who do not want to use chemicals, you can offer products that contain live bacteria. These drugs are not harmful, non-toxic and do not affect human health at all. Ideal for those who suffer from asthma or allergic diseases.

The most famous trade marks, producing the following drugs: Probiotica in Progress (PiP), Binatec, Chrisal, HD Unblocking, etc.

How probiotics work

Bacteria, penetrating into the pipes, begin to absorb fatty deposits, accumulated food residues, and small debris. At the same time, everything harmful microorganisms are destroyed, and the terrible smell disappears.

The microflora of probiotics prevents the number of microbes in the sewer from increasing and protects the metal from corrosion.

The main composition of this useful product:

• lacto- and bifidobacteria;
• lactic acid bacteria;
• acidobacteria;
• organic.

This drug is easy to use. It is enough to shake the can and dilute the composition in accordance with the recommendations specified in the instructions. Pour the contents into the hole in the pipe and leave for 12 hours. To achieve greater effect, you can repeat the procedure after a few days.

If you prefer to remove blockages with proven traditional methods, then you should use the following recipes:

1 way

This is an excellent preventive measure. It is advisable to carry out this cleansing once a week. To do this, remove the remaining water from the sink and pour 100 grams of soda ash into the hole. Leave for 30 minutes. After this, we wash away all the accumulated dirt and the resulting congestion with water pressure.

Soda ash is an excellent substance for removing mold, cleaning pots and pans from carbon deposits, and washing things. If you don’t have ash powder on hand, you can use regular soda and increase its quantity.

One of the best ways to combat limescale and fat deposits. The disadvantage of this method is the release of toxic chlorine. Therefore, when working with this substance, you should open the windows, cover the drain hole with a rag and leave the room.

Stages of work:

1. We pump out excess water.
2. Pour a mixture of soda ash and regular soda into the hole. You need to take 50 grams of each powder.
3. After 30 minutes, pour in 150 ml of 9% vinegar.
4. Immediately after this, add 150 ml of chlorine bleach to the pipe.
5. Leave the room.
6. Wait 30 minutes, then enter the room and open the water tap. Make sure the clog is cleared.

Once the pipes are clear, you should ventilate the room well and continue to use the plumbing as before.

In order to completely dissolve lime deposits, you need to apply citric acid. It will effectively remove plaque from the bathroom. To start the procedure, you need to pour 50 grams of acid into the drain and pour in 250 ml of very hot water.

Owners of country houses

In those households where there is no sewerage system and basic amenities are located on the street, it is recommended to carry out cleaning using septic tanks or local treatment plants. In this case, the processing of fecal matter occurs with the help of special microorganisms.

Chemicals should not be used as this will destroy microorganisms that help in waste management. Restoring their livelihoods will be problematic and costly.

Therefore, well-known cleaners based on living bacteria are used to clean cesspools.

Terms of use

1. Dilute the solution exactly as written in the instructions.
2. Pour into cesspool or pipe.
3. Try not to use this toilet or sewer for a day. All this time, bacteria will break down fats and dissolve all accumulated debris.
4. If the pipe you were cleaning is also clogged, use a plunger.

This is the simplest and most environmentally friendly way to remove blockages in any type of sewer. It is based on bacteria that actively destroy all blockages. But you need to know that microorganisms begin to act only at higher temperatures.

So, to quickly and successfully clean the sewer, you can use mechanical methods(cable or plunger) or pour in chemicals that contain acids and alkalis. Or you can use proven folk recipes. Solutions that contain living microorganisms are perfect for septic tanks.

Time does not pass without leaving a mark on sewer pipes, which is reflected in the appearance of deposits in them. At the same time, the properties and nature of the movement of wastewater largely determine the speed at which it will appear. Due to the presence of layers on the walls, the pipes acquire a smaller open cross-section. This leads to a decrease bandwidth and sewer blockage. In addition, sedimentation causes difficulties in drainage. He turns into favorable environment for sulfate-reducing bacteria that actively reproduce in it. At the same time, the waste products they form have negative impact on pipes, reducing their service life.

Preventing blockages

• Among possible methods in preventing sewer blockages, there is no equal in reliability to the use of filter plugs placed on the drain holes and the implementation of preventive measures, which include flushing it.

The desired effect can be achieved if you clean the drain holes weekly with one cup of soda, followed by vinegar. After waiting for foam to appear in the pipe, it needs to be spilled hot water.

Determining the blockage

In case of blockages, the procedure is determined by the specifics of the blockage.

1. If water cannot escape through the drain hole in only one plumbing fixture, then it is clear that the resulting blockage is local in nature.
2. If a similar picture is observed with all plumbing fixtures, then it is likely that the main pipe is clogged.

Removing local sewer blockage

1. It may also be that the blockage can be dealt with if the drain hole is well poured with boiling water. Using this method, fat deposits can be easily removed.
2. An alternative solution would be to remove the siphon, the main task of which is to filter suspended particles, and clean it. When dismantling it, it is important to do everything very carefully and make sure that during reassembly all parts remain in place and are intact.
3. If this attempt is unsuccessful, it makes sense to resort to chemicals for cleaning drains. Most cleaners contain the main active ingredient - alkali. With the help of such cleaners you can deal with fatty deposits.
4. If there is a suspicion that the drain is clogged due to hair trapped there, then an acid cleaner can help. It is unacceptable to pour any of these drugs into a pipe where there is a serious blockage that does not allow even a drop of water to seep out. The fact is that there is a risk that the cleaner may splash back, causing a burn.

In addition to the above, it is prohibited to add acids to alkalis. It is possible that this could lead to a very violent reaction. If you are going to remove blockages using chemicals, you must follow the manufacturer’s recommendations.

We use a plunger

It should be remembered that a simple device called a plunger can come to the rescue in the fight against blockages. To make it easier to deal with blockages, you need to apply a layer of Vaseline or other thick lubricant to the edges of the plunger and then start cleaning the drain.
It is important that the entire bowl of the plunger is submerged in water. When placing it on the drain hole, you must first remove the air from the bowl.

How to solve the problem if all means are powerless against blockages? In this case, there can only be one way out - use a plumbing cable. One end of this device provides a handle, and the other has a tip made in the form of a drill or brush.


The cable is often used by professionals, and to achieve the desired results you need to have certain skills in working with it. It can also navigate turns, but it is important to use caution and moderation here - they can damage the pipe if it is made of plastic. If you doubt whether you will be able to cope with the blockages, or you do not have a cable at your disposal, then in this case it is recommended to entrust this work to a plumber.

Removing blockages from main pipes

In principle, similar methods are used here to combat blockages. The specificity lies in the use of professional equipment, special equipment and industrial cleaning products. At the heart of sewer pumping industrial method lies the use high pressure and temperature. A clogged drain is not a good reason to panic. With such an attitude, people act thoughtlessly, and as a result, everything ends in even bigger problems.

Drain clogs are a common problem for homeowners. different types housing. And in most cases, you can get rid of this trouble yourself, without calling specialists to your home. Knowing some ways to get rid of blockages in the pipes of a toilet, kitchen or bathroom sink will help quickly and without extra costs eliminate the problem.

How to clear a clogged toilet

In most cases, blockages in sewer pipes occur due to the sedimentation of fecal matter on the walls of the pipe. This happens despite constant draining of water. All the same, part of the plaque constantly settles on the pipe and reduces its clearance over time. There are several ways to clean a sewer pipe:

1. Using a special cable.
2. Pouring chemicals into a pipe.
3. Use of pipe cleaning machines.

Working with a cable is relevant when it is necessary to remove contaminants from the walls of the pipe and get rid of the blockage itself. The cable is a cord with a special attachment. It is introduced into the pipe in a circular motion, otherwise some contaminated areas may be left unattended. When the cord encounters a blockage, you must do one of the following: either push the sewer blockage further, to a more large diameter, or pull it out.

The cable is not an effective means of cleaning mineral deposits on the walls of pipes, so this procedure must be repeated several times. When working with plastic pipes you need to be careful, as they can be easily damaged.

Use of chemicals It also easily helps clear blockages. From available means, soda and vinegar are often used, which are taken in the ratio: half a pack per glass. First, the water is drained from the pipe, then half a pack of soda is poured in and a glass of vinegar is poured into it. These substances are good because they remove any type of deposits. Be careful when doing this, because gases that are dangerous to the respiratory system will form in the pipe.

The mixture should remain in the pipe for about one and a half hours. Then everything needs to be rinsed well with water. If necessary, the operation is repeated. There are also ready-made mixtures, which also effectively remove clogged drains. For example, the product “Mole”, “Tiret” and others. They are available in the form of powder, gel or liquid, which are poured into a pipe. The exposure time is about 2 hours, after which everything is washed well with water.

Products should not be left in the pipes for a long time, as this may compromise their integrity.

Cleaning pipes in the kitchen

The means at hand that are found in every home will help remove blockages in the kitchen. It can form due to the accumulation of grease from washing dishes, food debris and hair. They all form a lump through which water does not pass well. To remove blockages in kitchen pipes, use:

1. Chemicals.
2. Plunger.
3. Soda with vinegar.

Eliminating the problem using chemicals gives good result. Now you can choose any of them; manufacturers offer a wide range effective means. You can even use Domestos by pouring a few caps into the drain. After waiting a little, you need to flush the pipe with water. Sometimes running hot water without using chemicals helps. This is possible in case of a slight blockage.

Using a plunger- This is a mechanical effect on blockages. A plunger is a device with a nozzle and a handle. Everyone probably has one in their house. The nozzle is attached to drain hole, and the handle makes several movements. At the same time, an air flow is created in the pipe, which pushes the pollution.

Soda with vinegar used in case of serious problems. Actions with these substances are carried out in the same way as in the case of combating contamination of a toilet pipe.

Other causes and ways to remove blockages

There are cases when poor passage of water through pipes is not due to the accumulation of various formations in them. There are also specific living conditions for people in regions with cold climates. When installing external sewer system usually the depth of soil freezing is taken into account. IN different regions it is different.

If an error was made during installation, then low temperatures air, water can simply freeze in the pipes. This has a bad effect on the condition of the pipes themselves.

How to deal with this phenomenon? It is necessary to run a cable into the pipe. When you feel the icing, you approximately measure this distance from the wall of the house. This way you can find the place where you need to warm up. Warming up can be done in several ways:

• just pour boiling water over the pipes;
• if this does not help, then cover the discovered area with rags from the outside and pour boiling water on them;
• if the sewerage material allows, then you can use blowtorch for warming up.

Return