Benefits of using Glimtrex Hard Wax Oil for lining:
- Easy to color yourself.
- Natural ingredients are safe for humans.
- Small expense.
- Gives water-repellent and dirt-proof properties.
- Corresponds European standards for slip resistance EN 13893, DIN 51130 (slip resistance class R10).
- Doesn't crumble or crack.
- If necessary, local surface repairs can be made.
- Antibacterial effect.
Tinting paintwork performed according to the catalog, RAL / NSC TIKKURILA; before applying each layer of coating, larch wood is sanded or wood is structured (light brush); painting technology type of coatings in each case is selected individually, depending on the intended use of lumber.
Package finished products: gasket with a separator, tie tapes, packaging in shrink film.
Glazing colors
Important! The monitor may distort colors. It must be taken into account that the shades depend on the color of the wood, the method of application and the amount of material applied, as well as the lighting. In each individual case, it is recommended to make trial stains on the wood used.
Prices for industrial painting of lumber.
LKM TEKNOS Finland (painting "Premium") Outdoor works:
Coating 3 layers.Walls
Price - 1200 rubles / sq.m.
Price - 150 rubles / sq.m.
Coating 2 layersfloors(terrace board, deck board)
Price - 1000 rubles / sq.m.
Additional processing of the reverse side
Price - 150 rubles / sq.m.
LKM TEKNOS (painting "Premium") Interior works:
Coating 2 layers.Walls(lining, imitation)
Price - 870 rubles / sq.m.
4. Coating 2 layers. Floors (parquet board, solid wood, floor board)
Price - 1800 rubles / sq.m.
LKMTIKKURILA Finland (painting ECONOMY") Outdoor works:
Coating 1 layer.Walls(lining, imitation, planken)
Price - 600 rubles / sq.m.
Additional processing of the reverse side
Price - 150 rubles / sq.m.
6. Coating 2 layers.Walls(lining, imitation, planken)
Price - 800 rubles / sq.m.
Additional processing of the reverse side
Price - 150 rubles / sq.m.
7. Coating 3 layers.Walls(lining, imitation, planken)
Price - 1150 rubles / sq.m.
Additional processing of the reverse side
Price - 150 rubles / sq.m.
8. Mechanical processing of products (brushing)
Brushing in one pass (light brush)
Price - 270 rubles / sq.m.
Brushing in two passes (deep brush)
Price - 400 rubles / sq.m.
(When ordering only brushing services without painting + 35 rubles/sq.m. packaging in shrinkfilm)
The question of proper painting wooden stairs relevant for everyone who installs it in their home. Carrying out a direct painting procedure does not require specialized education or qualifications, but certain factors should still be taken into account for proper painting of stairs. In this article, we will talk about key points, which should be considered in the process of painting a larch staircase.
Due to the excellent combination of operational and aesthetic properties, Siberian larch is best solution to create stairs in the house. The Larix company guarantees you the best level of prices for staircase components in Moscow.
| product name | Unit rev. | Price per one. | |||
| class Extra | class BUT | class AT | |||
| LARCH | |||||
| 1 | Baluster 50x50x900 | PCS. | 420r. | 315 rub. | - |
| 2 | Pillar initial 80х80х1200 | PCS. | 1450r. | 1208r. | - |
| 3 | Handrail for balusters 50x50, dim. 50x70x2000/2500/3000/3500/4000/6000 | m.p. | 483r. | 362 rub. | - |
| 4 | Bowstring 50x300, length 1000/1500/2000 | m.p. | 1123r. | 815r. | - |
| 5 | Bowstring 50x300, length 2500/3000/3500/4000 | m.p. | 1268r. | 815r. | - |
| 6 | Bowstring 50x300, length 4500/5000/6000 | m.p. | - | 815r. | - |
| 7 | lengths 900-2000 |
m2 | 2995 rub. | 2174r. | 1208r. |
| 8 | Shields (Steps) 40x300/400/500/600/700/800/900/1000, length 2100-4000 |
m2 | 3381r. | 2174r. | 1208r. |
| 9 | Furniture Shields (Coming up) 20x200/300/400/500/600/800, lengths 900-2000 |
m2 | 1572r. | 1208r. | - |
| 10 | Furniture Shields (Coming up) 20x200/300/400/500/600, length 2100-4000 |
m2 | 2029r. | 1208r. | - |
| 11 | 26x800x1200/1500/1800/2000 |
m2 | 2044r. | - | - |
| 12 | Furniture Shields (Riding - Steps on metal/concrete - Reinforced furniture) 26x800x2500/3000/3600/4000 |
m2 | 2637r. | - | - |
| 13 | Beam 80x80, length 2000/3000/4000/5000/6000 | m.p. | 620r. | 425r. | 309 rub. |
| 14 | Bar 150x150, length 2000/3000/4000/5000/6000 | m.p. | 2179r. | 1494r. | 1087r. |
| ANGARSK PINE | Unit rev. | class Extra | class BUT | class B | |
| 1 | Furniture Shield 18 x 600 x 2500/3000 | m2 | 978r. | 804r. | - |
| 2 | Furniture Shield 28/40 x 600 x 2500/3000 | m2 | 2174r. (40mm) | 1183 rubles (28mm.) 1610 rubles (40mm.) |
- |
REQUIREMENTS FOR THE PAINTING PROCESS
Before proceeding with the direct preparation and application of paint, it is very important to decide what result you want to achieve. If you can form a visual picture, then this will greatly simplify the process of selecting paint, and also help you choose the best tool for applying. When choosing paint, it is important to remember certain points.
To maximize the preservation of the wood texture on the surface of the stairs, you should avoid applying primers, and when choosing a paint, give preference to the look with minimum thickness coatings. Also a good remedy to preserve the natural wood texture of the stairs, you will choose in favor of a matte or glossy varnish. Regardless of whether you buy a clear or tinted varnish, this species coatings will help you maximize the appearance of the stairs.
The choice of paint also depends on the location of the stairs. When painting within the interior, you need to choose a coating that dries quickly and weathers. When painting the exterior staircase, it is necessary to make a choice in favor of more resistant paintwork.
Particular attention should be paid to the steps: for their processing, a specialized paint is needed, which will prevent rapid abrasion.
WHICH PAINT COATING TO CHOOSE?
In the case of paints, it is necessary to choose a type of coating that is intended for a particular type of rock. For example, hardwood paint will not adhere well to softwood stairs. For Siberian larch, you need to choose specialized alkyd or urethane-alkyd types of coating. These paints fit perfectly on the larch structure, and if necessary, the stairs can be easily updated by applying a new layer.
paint the stairs The choice in favor of paints guarantees you a wide range of options for choosing a shade. The choice of paint color depends on the stylistic concept of your interior.
Enamel paint coatings are the best solution if you need reliable protection for a wooden product. In case of Siberian larch the use of enamel is relevant only if the staircase is installed outside the house. The high concentration of natural resins in the wood structure protects the larch from negative impact moisture and ultraviolet.
One of the most popular solutions for painting larch stairs is varnish. The fact is that the breed has amazing aesthetics. The dense pattern of growth rings and the noble shade of wood have long been a favorite solution for designers when creating modern interiors. Lacquer, unlike alternative coatings, is ideal solution, if you need to emphasize the natural color and wood texture. If you need to add a shade to the stairs, you can buy varnish with a certain pigment in the composition. For stairs inside the house, it is best to use varnishes with alcohol base. As for the coating of external stairs, for them optimal solution will be nitrocellulose varnish. The coating with nitrocellulose is considered to be more resistant to temperature changes and ultraviolet radiation.
In our age of synthetics and artificial materials people are increasingly striving to use natural raw materials to build and decorate their homes. Owners of private houses attached terraces wood is often chosen as the material for outdoor flooring. Deservedly popular is the terrace board made of larch. This tree has a pleasing appearance with smooth pattern lines and big choice shades, which determines the aesthetic side of the issue. In terms of strength, larch is inferior only to oak, and then only by one point. Therefore, this wood is suitable as a floor covering subjected to constant intensive loads. the best way. The use of natural materials in home decoration invariably provokes questions related to the processing and painting of such raw materials. These issues are especially acute for wood in an open area, since the influence of atmospheric factors adversely affects its durability.
How not to spoil the larch floor with improper processing?
To begin with, let's analyze the unsuccessful options for covering the decking board:
- Some craftsmen have had the bitter experience of using yacht or other hard-wearing lacquer as deck flooring. Attention! So lacquered upper layer normally keeps no more than one year and after the first winter it will crack significantly. Lacquer on the surface wooden floor forms a rigid film, which tends to crack due to microshrinkage wood material under her.
- Aquatic acrylic varnishes they are good because they form an elastic film that adapts to the "micro-movements" of the tree, however, they have low wear resistance and quickly wear out from walking on them.
IMPORTANT: It should also be taken into account that the varnish penetrates into the wood no deeper than 2 mm, which, in principle, is not enough for high-quality protection of the material. If it is necessary to change the coating, the varnish will have to be completely removed. mechanically(grinding), which is a rather time-consuming and costly process.
The most preferred way to paint a larch decking board
Terrace flooring with oil.The most environmentally friendly and most acceptable option for processing such wood is the use of special terrace oils. Such compositions tend to penetrate deeply into the wood. Can be treated with terrace oils different kinds wood, including oak, pine and larch, as well as those materials that have previously been heat-treated. Timber coated with terrace oil will not dry out or swell. In addition, many terrace oils contain substances that additionally protect the wood from moisture and ultraviolet radiation, the formation of rot and mold, and eating it by insects.
Modern oils for woodworking are based on only natural ingredients. They most often include: linseed, rapeseed, walnut, soybean and other oils. When applying them, it is often not necessary to wear even a mask, in contrast to work with lacquered solvent based. To protect color from fading, outdoor oils include crushed mineral particles that have reflective properties.
From our a large assortment you can choose a terrace oil that will not change the original color natural wood, but only slightly emphasize it, or you can pick up and set a completely new tone wooden surface terrace board. The palette of modern terrace oils includes both natural shades, and creative options colors.
Attention! Among the wide variety of special oils for decking, you can choose those that will reduce slip when it gets wet. This option is optimal for covering the terrace near the pool.
The oil coating also requires periodic renewal, however repair work will consist only in applying a new layer, without any preliminary grinding. This will have to be done about once every 1-3 years. At the same time, in a minimum of time, it will be possible to return the former aesthetic appearance of the wooden floor on the terrace.
How to paint a larch decking board?
Proper application of special oil to terrace board provide good impregnation, reliable protection and long term wood floor service.
Siberian larch is rightfully one of the most popular wood species. First of all, this is due to its consumer properties, of which it is especially worth noting the high resistance to decay, which is twice as high as that of pine. The high resistance to destruction of larch is explained by a combination of its unique properties:
- high density
- high resinousness,
- special resin composition.
The best proof of the durability and resilience of larch is the thousand-year-old piles on which Venice is built.
Coloring and protection of wood
AT modern conditions for added protection, longer life, and an attractive look appearance larch products, wood coloring and protection are used, which are an important part finishing works during construction.
Coloring wooden products special compositions includes not only coating with paints and varnishes, but also treatment with antiseptics and other protective materials.
Application options protective coatings can be:
- Glazing, that is, translucent, not hiding the texture of wood;
- Completely hiding the structure of the wood.
paints and varnishes
Today there is a wide range of special protective compounds various manufacturers, which, according to their intended purpose, can be conditionally divided into:
- Antiseptics;
- flame retardants;
- Paintwork materials for interior work;
- Paints and varnishes for outdoor work.
Wood preservatives
Antiseptics include waterproof and water-repellent compounds that are designed to protect wood from damage by fungi and insects. After treatment with antiseptic preparations, the wood becomes unsuitable for the life of biological destroyers, destroying them and preventing their further appearance. It is definitely worth treating the deck and terrace boards with them. Antiseptics, in turn, are divided into 4 groups:
- Water-soluble antiseptics. Apply to preventive protection wood not in contact with water.
- Oily protectors. Used to protect statically loaded wood.
- Antiseptics for organic solvents. Actively protect all types of wooden structures both inside and outside buildings.
- Combined antiseptics. They are used in the same cases as the previous group.
Modern antiseptics after processing wood form a waterproof, elastic film with excellent adhesive properties.
 |
 |
If wooden structures are exposed to various climatic conditions, it is important to consider that antiseptics are washable (water-soluble formulations) and non-washable ( oily antiseptics and impregnations on organic solvents).
The depth of larch impregnation affects the reliability of protection against biological factors. The method of impregnation depends on the type of antiseptic and technical capabilities. Most affordable way- coating the surface of wood with a brush or roller. For large volumes of wood, it is advisable to carry out antiseptic treatment by dipping. Highly effective way is impregnation in autoclaves, but this requires special expensive equipment.
Fire retardants for wood protection
flame retardant - special composition, the treatment of which gives the wood high refractory properties and prevents the development of a fire. Upon reaching high temperature(burning temperature of wood) flame retardants foam and form a specific heat-insulating foam that protects the wood surface from excessive heating and thus prevents fire.
Paintwork materials for interior work
Exploitation wooden materials indoors, for example lining or floorboards, has its own specifics, the features of which are that indoors wood is subject to slight fluctuations in humidity. At the same time, wooden floor coverings must be resistant to abrasion.
Varnishes, paints and tinting coatings are used to protect larch indoors. Treatment before applying paint or varnish with a special filler gives the wood additional protection and also reduces the consumption of varnish or paint.
Paints and varnishes for outdoor work
Protection of larch, operated on outdoors, involves applying paintwork materials that help wooden structures resist the destructive effects of climatic conditions: changes in humidity and temperature, ultraviolet rays.
Among protective equipment for external protection of wood, primers, azures, linseed oils, oils with an ultraviolet filter, emulsions based on beeswax can be distinguished.