Drawings of a wooden chandelier. How to make lamps from wood with your own hands? Interesting idea for a chandelier made from plastic spoons

Original designer lamps made of wood. Homemade lamps made of wood photo.

If you like to do everything with your own hands, we recommend to your attention a selection of the most original lamps made from wood made by designers. But to make such lamps you don’t have to be a designer at all, just look at these photos, show a little imagination and you will succeed.

Wood unique material, has been used for home improvement since the time of our ancestors, wood has positive energy, it's completely environmentally friendly pure material. In this article we will look at the most original options making lamps from wood.

Ceiling lamps made of wood.

Original pendant chandeliers made of wood.

Homemade chandelier flower garden.

Chandelier ball, made of rope. To make such a chandelier, an inflated balloon, which is wrapped with a rope, then the rope is covered with glue, when the glue dries, the ball is blown off and the result is such a structure from which you can make hanging lamp.

Lamp from a pallet. Wooden pallet sawn into pieces which are used to make lamps.

Original solution.

A lamp made from ordinary kitchen graters.

Wicker lamps. Here a basket is woven from a thin vine and hung from the ceiling.

Table lamps made of wood.

Night light made of wood.

Nothing adds coziness to your interior like objects made of wood: tables, bedside tables, beds or pleasant, pleasing things to the eye - crafts, paintings and other little things. Have you ever thought how stylish and homely lamps made of wood will look?

4 master class on how to make a chandelier from wood - very stylish and modern!

Watch the master classes offered below, evaluate the photos of the finished wooden chandeliers– you will be amazed by the ease of manufacture and the elegance of the forms. Such DIY wooden chandeliers will look harmonious in any room - from the hallway to the bedroom, moreover, they can be hung on the veranda or in the garage - they will emit warm, romantic diffused light everywhere.

What makes up the geometry of the room? From the placement of walls, furniture, tulle, paintings... Add more style to your room by introducing the geometry of a chandelier! So stylish ceiling lamp from wooden slats It’s not difficult to make but looks very impressive.

Materials and tools

• 18 wooden slats (posts);
• construction stapler with staples;
• metal pendant for a chandelier;
• metal paint;
• jigsaw;
• ruler;
• pencil.

Installation process

Let's prepare the frame of the chandelier - wooden posts. They will be natural in color.

• Let's cut first 4 identical high columns- according to the height of the chandelier.
• Then let's make 8 more - for transverse inserts.

Step 2: We make the frame of the chandelier.

• Let's make the first frame. Let's take it 2 long guides, put them parallel to each other, 2 short - across between them and fasten them in all corners with a construction stapler.
• We also use a second pair of long slats. It turned out to be 2 frames. Using the same stapler, we connect them with other transverse slats. It turns out to be a kind of cube.

Let's add a designer touch to the frame - we'll lay another diagonal rail through each side of the cube. To do this we will cut one corner of the rail at 45 degrees and apply it to one of the sides for fitting.

Step 3.

• Mark with a pencil and cut off with a jigsaw.
• We attach the diagonal with a construction stapler, as shown in the photo.
• We will do the same for the other parties.

Step 4: Attachment

The model of this chandelier does not include a lampshade, so we take a ready-made blank for the lamp - an original pendant for the lamp. Let's paint it in favorite color and leave to dry.

Step 5.

While the paint is drying, we will make a hole in the frame to secure it to the factory hanger. The diameter of the hole should not be much larger than the diameter of the pipe so that the lamp does not fall through.

But in any case with inside you need to tighten the washer or proprietary limiter.

When the suspension is dry, we fix it to the ceiling, then put on the lamp frame, tighten the limiter and screw in the light bulb.

Looking at this chandelier, you will understand that you would not find it in any store. It will become a favorite decoration of even the simplest and smallest room and will definitely be an artful addition to your home interior.

These master classes are intended for anyone who would like to learn or improve their skill in making practical, unique and quite elegant wooden chandeliers with their own hands. The advantages of these products are that wood is easy to process, it is safe, because all conductive parts are hidden in insulated housings, and you can fit chandeliers made by yourself into any interior!

Master class No. 2. Designer chandelier made of wood

Simple creative lamp made of wood can be used as a night light, if you make it so that little light passes through, or as a chandelier, making fewer stripes.

Materials and tools:

• very thin wooden plywood or thick sheets of paper (the main element of the lamp);
• glue for wood or paper (PVA);
• clamps or clips (useful only during the process);
• a wire with a socket and a plug (if it is a lamp from a general power supply);
• pencil;
• scissors or paper knife.

Chandelier assembly

If you don't have ready-made strips, you can cut them from a piece of thin plywood or thick paper. You can mark the strips with a pencil or cut them straight away, because they don’t have to be the same. Any design solutions are welcome!

Glue the strips together. We make a rim of the desired diameter from each strip and glue it overlapping with PVA or wood glue.

It is better to glue it right away, creating the final design of the chandelier, since it will be difficult to make one shape from rims of different diameters in the end. Insert strips between others and fasten them together with clamps.

• It is necessary to make a mount for the socket and lamp. Use energy saving light bulbs and when the power is on, do not touch the electrically conductive parts of the cartridge.
• Let's cut it out square piece of plywood and make a hole in it for the cartridge. To do this you need to circle inner diameter cartridge so that it does not slip right through.

• We cut a hole with a knife and fix the cartridge in it.
• We drag the wire through the lamp, taking into account how it will hang.
• Then we fix the cardboard itself with the socket in the lamp using glue, as shown in the photo.

To dry, secure the plywood with two clamps. Let's leave it for a while.

When the glue has dried, remove all clamps. All that remains is to hang the lamp you made with your own hands, where it will delight you every day!

Master class No. 3. Wall lamp made of wood

If you like bright electric lights and romance simple details– watch this master class. Nothing complicated, but original and stylish. A very simple wall lamp made of wood in a loft style.

Materials and tools:

• wooden bracket (can be purchased at home improvement stores, such as IKEA);
• cartridge with plug and textile cable;
• spray paint on wood;
• old box or newspapers;
• signets.

Manufacturing technique

Take an unnecessary box or spread newspaper to paint the bracket. It is better to do this with gloves so as not to get dirty. Spray paint over the entire surface. If the color saturation after the first painting does not satisfy you, leave the part to dry, then cover it with a second layer and leave it to dry again.

We insert a textile wire into the hole in the bracket and make one turn around the bracket. Textile wire is the highlight of this lamp, but you can use any wire.

We insert the other end of the wire into the socket and make zero and phase wiring in it.

We secure the bracket to the wall with screws or dowel nails. Screw the pear-shaped light bulb into the socket and insert the plug into the socket. How lovely! And in the evening, when these bulbs are the only source of light, they create a romantic mood of a summer evening.

Master class No. 4: Lamp with wood veneer

Fantastic flexible pendant light wood plywood will serve as a decoration for a dining room or bedroom; its rounded shapes and neutral colors will complement any interior.

Materials and tools:

• a piece of flexible plywood board (its length determines the height of the chandelier + a small piece for fastening);
• 2 wooden hoops (you can use hoops of the same or different diameters);
• office or construction clips;
• glue gun (hot glue);
• long ruler;
• pencil;
• knife or large scissors.

Lamp manufacturing technology

Step 1: Prepare the cartridge mount.

1. We take a hoop of smaller diameter and a piece of plywood board. Place the hoop on the board and trace the inner diameter with a pencil.
2. Cut out a circle (or almost a circle - a piece sufficient to secure the lamp).
3. In the center of the circle, cut out a smaller circle - the diameter of the cartridge.
4. Take hot glue or wood glue and glue the circle with the hoop.

Step 2.

We take the second piece of flexible plywood and fix it on the table for accurate measurements. Take a ruler and a pencil and draw parallel lines - approximately 2 cm wide.

But you can make the stripes as wide as you like - narrower or wider depending on your preferences.

We cut the plywood into equal strips. We will need 4 additional strips to adhere the rims to each other. These strips will be shorter than the others (almost half as long).

Step 3.

• We fix 4 short stripes on lamp. To do this, use one clamp to hook one strip on the small hoop from above and a second clamp from the bottom on the large hoop.
• We repeat this procedure on 4 sides, as shown in the photo (in order for the chandelier to be level, the hoops must be positioned strictly parallel to each other).

Step 4.

1. We attach the remaining strips in the same way, starting with four on all sides, and then filling the voids between them (this should be done for overall symmetry).
2. The strips should be equally curved so that the appearance of the chandelier resembles a lantern.
3. Latest 2 strips must be left to hide the clips.
4. We glue them one at a time - each according to the diameter of the hoop. You can glue it overlapping - it will be invisible.

All that remains is to hang the lamp and secure the socket in the hole. The air lamp is ready!

Overall dimensions of the lamp, mm: 337x559x419 (width x depth x height)

Form the base

The free forms of the base parts provide a good opportunity to practice constructing contours using the method of enlarging on a scale grid, since these parts should first of all look expressive, and the accuracy of the dimensions in this case is not too important.

1. Enlarge all templates to the specified sizes. From 19 mm material, cut two blanks for base A and one bracket B. From 10 mm planks, make two blanks for racks C. Fasten the blanks of the base and racks in pairs with double-sided tape.

2. Using spray adhesive, attach the paper templates to the blanks. Use an awl to mark the center of a 6mm hole on one of the C posts. Then cut the pieces along the outline, leaving a small allowance on the outside, and sand to the line. Save the 19mm scrap to make spacer D shown in fig. 1.

3. Now remove the templates, separate and sand the parts. Planing or sanding Align the edges of the halves of base A that will be glued together. Mill out lamella nests in both edges and glue the base, squeezing the parts with your hands for several minutes until the glue begins to set; then carefully place the glue on a flat surface to dry. When the glue is completely dry, sand parts A, B and C. sandpaper № 220.

Note. When grinding pillars C, maintain the previously marked center of the hole. If necessary, deepen the hole with an awl.

4. Take the scrap saved for spacer D and transfer the contours of the pillars C onto it (photo A). Then mark the height according to the dimensions shown in the figure. 1. File the spacer to its height and sand the top and bottom edges. Apply glue between the lines on both sides of the spacer (photo B) and clamp the part between the posts, aligning it with the marked contour lines.

Note. When gluing the posts, make sure that the intended center of the hole is located on the outside of the glue.

Once the glue has dried, saw off the protruding parts and sand the spacer flush with the edges of the posts.

5. Place a piece of double-sided tape on the bottom edge of the C/D adhesive and attach it to the base A (photo C). Do the same with bracket B, aligning it with the center of the hole in the posts (photo D). Then drill and countersink pilot holes through the base and secure the B/C/D assembly with screws as shown.

6. Drill a 6mm hole through the posts and bracket at the marked point (photo E) and glue a wooden dowel into the hole. When the glue has dried, cut off the protruding ends of the dowel and sand it flush with the surfaces of the C posts.

Remove the screws from the base, separate the bracket with the posts and remove the tape. Then re-attach the assembly to the base with screws, adding a little glue.

Make a wooden lampshade

We made the lampshade using two devices: a compass (for band saw) and milling (described in the “Tip of the Master”).

1. Using a compass, mark a center and a circle with a diameter of 158 mm on a 6 mm board. Drill a 3mm hole in the center, cut out a disc and sand the edges. Mill the annular groove into bottom side drive E.

2. For shell F, saw off a 1 mm thick strip from the edge of the workpiece measuring 25x32x485 mm.

Note. Install in the table sawing machine anti-splinter liner and saw off the strip with outside to avoid dangerous kickback.

Sand the strip and cut it to final length.

3. Mark the overlap line of the ends of the strip. Then glue the shell F (photos F and G). Once the glue has dried, carefully sand the outside of the piece to make the overlapped edge invisible. Glue the shell to disk E (photo H) and leave to dry.

4. Countersink a hole on the inside of disk E and attach the lampshade with a screw to bracket B. Apply any finishing coating. (We sprayed semi-matte nitro varnish three times from an aerosol can.)

The compact LED light with magnetic base is easy to install and provides easy access for battery replacement. Secure the mounting plate with small button head screws. Then simply insert the batteries and turn on the lamp to make the world a little brighter.

DIY wooden table lamp - drawings

Born pretty, darling ROOM Ð°Ð´Ð¸ÐµÐ½Ñ Ð¾ÐºÑÐ½Ð°Ð½Ð¸Ñ Ð±Ð»ÐµÑк…

Modern interior design is not only about correctly arranged stylish furniture and color scheme, which predominates indoors, but also in proper lighting. Lighting devices allow you to focus on certain areas of the room, visually enlarge the space or, conversely, give the bedroom or living room more comfort and warmth.

Today, crystal wall sconces are no longer a sign of wealth and luxury, but wooden lamps are actively regaining their former popularity. Few people know that in the 16th century, it was structures made of trees that were installed in temples, palaces and houses of wealthy officials. Certainly, LED lighting in those days there was no, but instead energy saving lamps The rooms were illuminated with candles placed on wooden branches.

In 2010, a tornado hit New York City, leaving behind mountains of broken branches and fallen trees. Young designers Harris Hine and Amily Visclocky wanted to draw public attention to this topic by creating lamps from found driftwood, but instead revived a long-forgotten style. Thanks to this idea everything more people started to engage in such know-how and you, too, can easily create unique sconces ( Wall lights) with your own hands. Photos of ready-made and interesting lighting devices can be found in huge quantities on the Internet, but we will outline some of the features of such designs below.

Advantages and disadvantages of wooden sconces

Besides stylish appearance, such lamps can safely be called environmentally friendly. Not only does wood not emit any harmful substances, it will also, on the contrary, saturate the air in the room with useful aromatic resins that make breathing easier. Another plus is the ease of processing the material. If for the production of plastic and metal structures If special equipment is used, a wooden lamp will require tools that are found in almost every home.

Wood is strong and durable, especially if it is treated with special impregnations.

If we talk about the disadvantages of such structures, then it is worth paying attention to the following nuances:

• Wood burns well, so using incandescent lamps in such designs is not recommended. Otherwise, the contact in the lamp socket may burn out and the entire lamp will burst into flames in a matter of seconds.
• Insects actively attack such lighting products.

• Wood is a hygroscopic material. This means that it accumulates and absorbs moisture well. So that the structure does not deform and serves long years, it is better to use such a lamp at a constant temperature and humidity. Based on this, you can hang a sconce above the bed in the bedroom, but installing such lighting fixtures in the kitchen or bathroom is not recommended.

Healthy! Cedar is the most moisture-resistant species, and additional processing special solutions will give it even more resistance to temperature changes and moisture.

As you can see, before working with wood, it is necessary to prepare a project for the future lamp and calculate it in such a way that the lamps are located at a distance from the tree. Let's consider several options for such sconces and ceiling chandeliers.

Wood design options

The sconces in the living room interior, photos of which are presented in the article, look very cozy and homely. For this room, you can create a very stylish lamp that can be mounted on the wall or used as a table night light.

One option for creating a lamp is a sconce made from wood and a broken water pump. The resulting result looks very stylish and is suitable for lovers of design, which contains unusual devices that are not used for their intended purpose.

An unusual lamp will be made from the floor of a dried tree trunk, coated with varnish, and pieces of colored crystal glued to it. Such lighting fixture Can be hung horizontally, vertically or used as a floor lamp/night light.

Stylish chinese lantern can be made from a broken lamp, bamboo and coconut fiber rope. It's pretty simple design which looks very impressive both in the house and on the porch or in the gazebo. By attaching a wooden hook to the bamboo, you get a multi-functional sconce on which you can hang plants.

You can make a sconce from wood with your own hands very simply. To do this, you will need a wooden plank that can be given any shape. A kind of hook will be attached to it, on which the lamp will be placed. It will require sticks of the same diameter and length, which we will fold according to the principle wooden well or a house, which children usually build from pencils. The result will be unusual lamp as if from old fairy tales.

A creative lamp can be made from a pine branch, a garland and a curtain rod holder. This device is also multi-functional, as you can hang decorations, scarves and much more on the branches. The garland's bulbs do not heat up, so this sconce will not light up, and to create it you will not need any skills in conducting electricity.

A wall lamp for a nursery can be made from a wooden plank in the shape of a cloud and LED lamps. The resulting night light looks very beautiful on the wall, as the light is scattered as if from under a cloud.

By using your imagination you can make a very creative lamp for country house, apartment or garden. You can use everything that, as you thought, has not been used for many years and is practically getting ready to be “thrown away.”

What to pay attention to when creating a lamp

• If you cut wood, be sure to always wear a protective mask. Sawdust can cause an allergic reaction.
• If there is only one light bulb in the lamp, then two wires will come from it. The phase is connected to a switch, from which a conductor will go to the input phase. Zero ( of blue color) is connected immediately to the input zero.
• If the lamp has 2 or more lamps, then there will be more wires, but the connection principle will remain the same.

The optimal placement of sconces depends on the type of room, for example:

• The height of the sconce above the bed in the bedroom should be 1.2-1.6 meters from the floor.
• In the nursery, it is better to place the lamp so that the child cannot reach the light bulb.
• In the corridor it is recommended to place it at a height of 2 meters from the floor. If the ceilings are low, then you can hang the sconces lower - at a distance of 1.8 meters.
• Optimal height The location of the sconce for the living room is 1.3-1.4 meters from the floor.

In custody

As you can see, you can make an unusual lamp for a room from ordinary objects. As a result, you will receive an exclusive and stylish element interior design that will cost you a penny, but will look much more interesting than an expensive metal chandelier.

The kitchen with one sad, but very economical light bulb in the middle of the ceiling had been waiting for its lamp for a couple of years, which, as usual, we decided to make with our own hands. In addition to this idea, I had a couple of different ideas in my head: a lamp made of ropes or bottles, a lamp made of cups or twigs, or maybe made of veneer or clay? In short, things didn’t work out for us with kitchen lighting. True, there was a vintage lampshade from the 60s hanging above the desk.

Then, having looked enough at Scandinavian interiors, we got excited about the branches and driftwood. We decided that one should definitely hang on the ceiling in the kitchen, especially since we dream of a wooden kitchen furniture. No sooner said than done. Because finding a snag is a difficult and lengthy task.

In search of suitable wood, we wandered along the banks of several rivers (Latoritsa, Southern Bug, Zbruch, Dnieper and Desenka), wandered through the forests and puzzled friends who loved hiking. And then to the nearest park and right in the middle of the central alley they found their future wooden lamp:)

A long-awaited find

Satisfied with the long-awaited find, we returned home and... were confused, because doubts fell upon us. What will it look like? “What should people say?” (Ukr). But how to hang such a lamp if the intended kitchen furniture is not there?

In short, our branch first became a piece of furniture and special pride, and then it was slightly shortened, because part of it went to the children for a wooden lotto with animals. How so? And like this: an unknown animal began to gnaw on the branch :) I had to cut off a part, and then - it was not there - they made a lotto from another piece of the branch. There was a piece of driftwood left, untouched by the beast, and just the right length.

A year has passed and then our beloved “The village” writes to us, saying, let’s cooperate. We wanted it so bad! But we don’t have anything fresh or suitable for their theme. Well, really, I won’t do a master class on sewing a felt giraffe for “The village” :) What can we offer? Of course, the long-awaited driftwood lamp. This is the mainstream and Scandinavia! We discuss this idea with the editor, she agrees and we begin work on a lamp made from a branch with our own hands.

Everything could be done simply and quickly, but we are not looking for easy ways, so we go back to the forest. This time we need thinner branches to make wooden cases for the cartridges in the lamp. Fortunately, we find a fallen and dried tree quickly, combining a pleasant find with a useful walk for the younger generation.

While the children are sleeping...

Suitable branch

All necessary materials for a lamp from a branch:

A large dry branch, wire, plastic E-14 sockets, energy-saving light bulbs with a similar base, a thin metal mounting cable, clamps for it, dry branches with a diameter of 3.5 centimeters, small nails (about 10 pcs.), wood screws (2 short , 1 long), square board (8 x 8 x 2 centimeters), white acrylic paint, acrylic lacquer, masking tape. Saw, drill (engraver), drill, soldering iron, pliers, screwdriver.

DIY kit :)

And now the process of creating a wooden lamp with your own hands:

1. Clean the remaining bark on the branch with sandpaper. We leave some places untouched to give a natural look.

Sanding the branch with sandpaper

2. Mark the places on the branch for drilling holes for the wires. Also at the top of the branch we draw a line along which we will make a groove for the wire.

Marking locations for drilling holes

3. Drill holes using a drill. We make a groove with a drill (engraver).

Drilling holes

Making a groove for the wire

4. Drill holes in the square board for the cable, wire and mounting screw.

We saw and drill a square board

5. We saw branches with a diameter of 3.5 cm into pieces 5 cm long.

Sawing blanks

6. From these blanks, using a drill and cutter, we drill out a core for a plastic cartridge 4.5 cm deep.

Fixing the workpiece

Drill a hole for the chuck with a milling cutter

7. We make holes in them for the wires.

Drill a hole for the wire

Ready-made set of cartridge cases

8. Cut the wire to the required length, connect the cartridge to it, and put the cartridge in a wooden case. Then we thread the free end of the wire into the hole on the large branch.

Collecting details

9. We insert the steel cable into the holes on the branch and fix it with screws.

Fixing the steel cable

10. We lay the wire along the groove, fix it with nails bent into the letter G. We solder the joints of the wires, insulate the soldering points using heat-shrinkable cambric.

Soldering the wiring

The connection point of the wires in the heat-shrinkable casing

Fix the wire with L-shaped nails

11. Everyone wooden parts process the lamp with sandpaper, cover it with one layer of matte acrylic varnish. Square board We first paint it with white paint, and then varnish it. We did this so that the wooden trim would not stand out against the background of the white ceiling.

Sand and paint a square board

Varnishing the branch

12. Square wooden blank thread 2 ends steel cable and the power supply wire for the lamp. We set the desired height of the lamp using a cable, fix the cable with clamps.

Return