AGREEMENT OFFER

Individual entrepreneur Klimov Alexander Nikolaevich, acting on the basis of a Certificate of state registration individual as individual entrepreneur, hereinafter referred to as the Seller, publishes this Public Offer about Digital Goods presented on the Seller’s website

1. GENERAL PROVISIONS. SUBJECT OF THE AGREEMENT

1.1. In accordance with Article 437 of the Civil Code Russian Federation(Civil Code of the Russian Federation) this document is a public offer, and if the conditions set out below are accepted individual, which accepts this offer, makes payment for the Goods and/or Services in accordance with the terms of this Agreement. In accordance with paragraph 3 of Article 438 of the Civil Code of the Russian Federation, payment for the Goods by the Buyer is an acceptance of the offer, which is considered tantamount to concluding an Agreement on the terms set out in this offer.

1.2. Based on the above, carefully read the text of the public offer, and if you do not agree with any point of this offer, you are asked to refuse to purchase the Products and/or Services provided by the Seller.

1.3. In this offer, unless the context otherwise requires, the following terms have the following meanings:

Acceptance – full acceptance by the Buyer of the terms of the Agreement;

Offer – a public offer of the Seller addressed to any individual (citizen) to conclude a purchase and sale agreement with him (hereinafter referred to as the “Agreement”) for existing conditions contained in the Agreement.

Buyer - Site visitor - an individual who has entered into an Agreement with the Seller on the terms contained in the Agreement and is purchasing Digital Goods (s) and/or services.

Parties - Seller and Buyer are referred to together.

Website – a platform located on the Internet with the domain name “site”, which is an online store containing the Seller’s range of goods and services.

Digital product is a virtual product that is the subject of this agreement and has the following types:

a) finished digital goods – digital goods laid out for sale, having a completed appearance and ready for use.

b) courses – training programs using a distance learning system.

Delivery – delivery by the Seller of digital goods presented on the Site via electronic communication channels to the electronic mailbox whose address is specified by the Buyer in the Order;

Account is a virtual “office” of the Buyer, in which the registered user sees his personal data.

Registration is the process of the Buyer entering personal data into a special form on the Site when placing an Order (last name, first name, email address).

Order – individual items from the assortment list of Digital Goods specified by the Buyer when filling out an application to receive a Digital Good.

2. SUBJECT OF THE AGREEMENT

2.1. The Seller sells Digital Goods in accordance with the current price list published in the Seller’s online store on the website, and the Buyer makes payment and accepts the Goods in accordance with the terms of this Agreement.

2.2. The Seller delivers Digital Goods in exclusively virtual form, through Email and does not mail printed products.

2.3. This Agreement is an official document of the Seller.

3. ORDERING

3.1. The Order of the Goods is carried out by the Buyer by sending a properly completed form during the payment process. All fields of the payment form must be completed. In case of absence necessary information which allows the Buyer to be identified and the Goods sent to him, the Order will not be accepted by the Seller.

3.2. When placing an Order, the Buyer undertakes to provide the following information about himself:

last name and first name,
E-mail address.

3.3. The Buyer gives his consent to the Seller’s processing of the Buyer’s personal data with or without the use of automation tools. This consent of the Buyer applies to his last name, first name and other information related to his personality and specified when placing the Order. Consent is provided to carry out any actions regarding personal data that are necessary for the proper execution of this Agreement, including without limitation: collection, systematization, accumulation, storage, clarification, use, distribution, blocking and destruction, as well as carrying out any other actions with personal data in accordance with the current legislation of the Russian Federation.

3.4. Payment by the Buyer for an Order placed on the website means the Buyer’s agreement with the terms of this Agreement. The day of payment for the Order is the date of conclusion of the Agreement purchase and sale between the Seller and the Buyer.

3.5. If the Buyer has any questions regarding the Product, before placing an Order, he must seek advice from the Seller by email at help@site, or through the feedback form posted on the site.

4. CONDITIONS AND DELIVERY TIMES OF DIGITAL GOODS

4.1. Delivery of the paid goods to the Buyer is carried out by sending an email with a link to receive the Digital Goods to the email address that the Buyer specified during the Registration process. The deadline for sending the letter is 8 hours from the receipt of payment.

4.2. The Seller delivers the Goods based on the Order placed by the Buyer.

4.4. The Goods are considered received by the Buyer, and the Seller’s obligation to deliver the Goods is fulfilled from the moment the operation of sending the Goods is recorded via electronic communication channels to the Buyer’s electronic mailbox in the Seller’s automated electronic system.

4.5. In case of failure to receive the Goods by the Buyer within the period specified in clauses 4.1 and 4.2. of this Agreement, or due to technical problems with the mail server of the Buyer's provider or for other reasons, the Buyer must contact the Seller and report non-receipt of the Goods. In this case, the Seller will resupply the Goods free of charge within 2 (two) business days from the date of receipt of the corresponding message from the Buyer.

5. PRICES AND PAYMENT PROCEDURES

5.1. The range and price of Digital Goods are freely available on the Seller’s Website.

5.2. The cost of the Product indicated on the website may be changed by the Seller unilaterally at any time.

5.3. Payment for Digital Goods occurs non-cash using the payment system installed on the seller’s website.

5.4. The Buyer's obligation to pay for the Goods is considered fulfilled from the moment funds are received into the Seller's bank account

6. TECHNICAL SPECIFICATIONS OF DIGITAL GOODS

6.1. Digital products are supplied in the following formats: PDF format, JPG format, mp4 format, XLS format.

7. RIGHTS AND OBLIGATIONS OF THE PARTIES

7.1. Rights and obligations of the Buyer:

7.1.1. The Buyer has the right to be provided with a Digital Good in accordance with the technical characteristics specified in this Agreement (clause 6)

7.1.2. The Buyer is obliged to pay for the Digital Goods in full before receiving the Digital Goods.

7.1.3. Products purchased from the Seller are intended for the personal use of the Buyer. The Buyer agrees not to distribute copies of the Digital Product in any form or manner.

7.2. Rights and obligations of the Seller:

7.2.1. The Seller has the right not to deliver Digital Goods for which it has not received cash in full.

7.2.2. The Seller is obliged to deliver the Digital Goods in proper quality in accordance with the technical characteristics indicated in this Agreement (clause 4).

8. RESPONSIBILITY OF THE PARTIES

8.1. For failure to comply or improper execution obligations under this agreement, the Parties bear responsibility in accordance with the current legislation of the Russian Federation.

8.2. The Seller is responsible for the conformity of the delivered Digital Goods technical specifications indicated in clause 4, as well as for compliance of the content of the Digital Product with all legal norms.

8.3. The Buyer is responsible for the proper use of the Digital Product in accordance with clause 7.1.3

8.4. The Seller is not responsible for the content and accuracy of the information provided by the Buyer when placing the Order.

8.5. The Buyer is responsible for the accuracy of the information provided when placing an Order.

SELLER'S DETAILS

IP Klimov Alexander Nikolaevich

OGRNIP 311222511700014

Website Privacy Policy

This site is an information and educational Internet project of Klimov Alexander Nikolaevich (IP Klimov Alexander Nikolaevich. OGRNIP 311222511700014).

This site strictly adheres to the following privacy policy principles:

1. Subscription to the newsletter is carried out at the own discretion of anyone through the form on this website. To do this, your email address is requested. You must also confirm your consent to receive information materials from the site in the letter that arrives after filling out the form.

2. The personal data of each subscriber is used only to send him periodic newsletters, news and project promotions: and will never be transferred to third parties in any form.

3. To get an idea of the content of the newsletter releases, you can familiarize yourself with the contents of the “blog” section of the site:

4. Each subscriber can unsubscribe from receiving newsletters at any time by clicking on the link present at the end of each letter.

Most carpenters and woodworking craftsmen want to have a universal unit on their farm, but many do not know how to make such a device on their own. In this tutorial, you will learn how to make a universal milling table with your own hands.
pros universal machine for wood is that you don’t need to have several units and walk with a workpiece from one to another while working. Unique and universal, it will be located on one table and perform the actions of several units. Of course, there are limitations to such a device, and it is not possible to make an absolutely universal woodworking machine. But making a table for a router with your own hands, which will include an electric planer and a circular saw, is quite possible.
To make your idea a reality, you need to take care of consumables, as well as the tools you will need to create an accurate and level table on which the devices will be mounted. Since there will be more than one device on the table, it is necessary to make a wider and long table. In order not to waste materials in vain, first you need to draw a diagram and location of future devices on a sheet of paper. This is an extremely significant argument, since the efficiency of the machine directly depends on the proper arrangement of all elements. Take care in advance about the position of each node. If the task seems very complicated, you can use ready-made diagrams and drawings. Thus, craftsmen make a table for circular saw with your own hands, without the help of experts.

Basic criteria for a circular saw table

The structure on which woodworking mechanisms will be installed must have the following characteristics:

Capital rigidity and stability.
Ideally flat surface.
Grounding.
Free space for sawdust.
Easy accessibility to waste for its disposal.
Protection shields that are installed above the rotating elements.

Compliance with the above rules will help you make truly high-quality and safe table for a router with your own hands.

There are several requirements for a circular saw that must be taken into account for high-quality, productive and safe operation of the unit.

1. Good mount saw blade.
2. Fencing the working part of the saw blade, which many consider an impossible task.
3. Availability of the unit start-stop button.

Additional requirements for the table depend on the preferences of the carpenter and his professionalism in this area. Auxiliary elements will help more accurately process workpieces, cut longer boards, which will ultimately affect the machine’s capabilities for producing absolutely accurate, high-quality and complex products.

Most craftsmen make the drawings of a milling table with their own hands, and if you are not sure, it is better to work with a mechanic or a person who made such a device.

Circular saw design, Baikal circular saw machine

An ordinary table, which can be purchased complete with a circulation plate, is made in most cases from stainless iron. Craftsmen use simple steel, and supporting structure welded from metal corners. The disk cutting wood is mounted in the inside of the table, on a shaft with bearings, and mechanical energy is supplied via a belt drive. In the slab there is a slot for the disk, which is surrounded on all sides by wooden formwork, and is adjusted with screws from the inside of the table. The gap between the table and cutting disc, there must be a few millimeters, otherwise sawdust will clog into the gap during operation and lead to a malfunction of the unit. The gap is adjusted depending on the disks used. Everyone tries to complete the drawings of a circular table with their own hands in order to make a universal and good table for woodworking, but lack of knowledge can play a bad joke.

Video: circular saw from circular saw Baikal 514

Calculation of parameters

To avoid costs and absurdities, strictly follow the basic parameters of the presented materials, and you will make quality table do-it-yourself carpentry. When we assemble a table for a hand-held circular saw with our own hands, it is necessary to take into account the power of the electric motors that will be used. If you are assembling a table for hand router with your own hands, you also need to take into account the performance of the motor.

For a deeper understanding of the design and layout of the product, view the story about carpenter's table do-it-yourself video of which is posted on the site.
Considering that the table will be universal, it is necessary to make the structure as stable and durable as possible. Craftsmen make drawings of a table for a router with their own hands, but if another person is welding the structure, it is necessary to explain in detail so that in the end all the elements are in in the right places. You don’t have to separately make a milling table for a manual router with your own hands, since most craftsmen, having made universal table, work on it and hand tools. This is very convenient because there is enough space to work, everything is at hand and productivity increases.

Power calculation

To make a good table for a circular saw with your own hands, you need to make the correct calculation of power, taking into account the ratio of the power of the electric motor and the expected work. That is, for comfortable sawing of various types of wood, it is enough to install an electric motor of 1000-1200 W. Experts do not advise using more powerful engines, as this is a big risk. If you need significant power and productivity of the installation, you should make the table design more thorough and perfect. With the proper approach, many craftsmen create a table for a manual router with their own hands, much better and more productive than models from branded manufacturers.

For a more accurate understanding, watch the story on how to make a milling table with your own hands, the video of which is in open access to view.
Industrial machines, as mentioned above, are completely made of metal, and the lower part is supplemented concrete slab, for greater reliability of mounting the unit. Craftsmen make a table for a circular table with their own hands entirely from metal or in combination with wooden elements.

It is important to take into account the factor if more units will be integrated on the woodworking table, and the more powerful the rated output is required, the stronger and more massive it is necessary to make the woodworking table with your own hands.

Small table for manual woodworking machines

To make a small woodworking machine, you don’t need to use metal. The following materials will suffice:
- textolite plate.
- plywood fins with a diameter of 20 or 50 mm.
- plexiglass.

Many people make drawings of a sawing table with their own hands or do without them at all, but as practice shows, it is better to use pre-prepared diagrams, as this simplifies and facilitates the manufacturing process.
For greater convenience and processing capabilities of workpieces, carpenters make Rotary table For milling machine with your own hands, which makes work much more convenient, enjoyable, and wooden crafts better and more perfect. Thus, craftsmen or adventurers make a saw table with their own hands.

Many people wonder how to make a milling table? Firstly, the material of manufacture depends on the size and power of the device used on it. From this we can understand that if the machine is large, then metal is needed, and if it is manual, then plastic and wooden elements. Thus, you can make a saw table with your own hands in a garage or private workshop
.
Wood processing is a very sensitive and responsible process, so it is very important to make a table for a hand-held circular saw with your own hands. It is very profitable to make the instrument yourself, because ready product much more expensive than the materials for manufacturing. A well made table for manual circular saw with your own hands, can be used when working with other portable woodworking tools. To make the carpenter's craft not only pleasure, but also convenience, you can make a table for a plane with your own hands. Such a table can be made entirely of wood, the main thing is to calculate the parameters.

Sometimes you need to make a separate table for an electric planer with your own hands, which will not cause any trouble for the craftsman, since the basic structure and materials are used the same as for a manual circular table. When there is nowhere to put your woodworking tools, this is a signal that you need to make a tool table with your own hands. Here, for every master there are no barriers to creativity, since they are made from metal, plastic, wood, using various pockets and shelves. A table for tools is the main element for maintaining order and cleanliness in the workshop.

Watch the video circular table with your own hands, which sets out all the details about the manufacturing process.

Video: Working table for a circular saw

Video: milling table; milling table

Make a table for a circular table with your own hands, having at your disposal hand power tool from Bosch or another leading manufacturer, it’s not difficult. But the presence of a table will significantly expand the capabilities of the tool. Manual models Bosch circular saws, like their analogues, demonstrate high productivity. But maneuverability, as the main advantage of a hand-held circular saw, can turn into a disadvantage if you need to process a large volume of workpieces. This is where a homemade table comes to the rescue.

The design of the table required for a manual circular saw is quite simple, which allows you to do it yourself. Homemade platform requires little skill and time to make;
Drawings and diagrams are not mandatory components for successfully assembling a table with your own hands;
The optimal material for making a table for a Bosch manual circular saw is metal;
Choosing for a circular metal table, do not forget about the massiveness of the structure and the need to be able to work with welding machine with your own hands;
Often the table is made by hand using wood. They are easier to assemble, which allows a beginner to make them;
A Bosch circular saw or its analogues is installed under the table top;
The disk should protrude above the tabletop. For this purpose, a special slot is provided on the surface of the table;
The lumber is moved along the table surface and cut with a circular saw cutting tool;
To increase the processing accuracy, the table can be additionally equipped with a longitudinal and angular stop;
The tabletop will take away part of the working disk, so the sawing depth of a manual circular saw will become less exactly by the thickness of the working table. This indicates the need to choose a hand-held power tool that allows you to install large-diameter saw blades;
It is recommended to make the desktop with an emphasis on strength and thinness. Metal or durable wood species are suitable for these purposes.

In many cases, it is better to start making a table with your own hands before purchasing the circular saw itself. This will allow you to optimally select equipment characteristics. For a manual circular saw that you want to machine on your workbench, optimal power there will be a minimum of 1.2 kW. This will allow you to cut efficiently and without overload. large quantity materials.

Tools and materials

If you are unlikely to need the drawings, support those received in this material Knowledge of video lessons on assembling tables for circular tables will not be superfluous.

To make a tabletop that will turn a manual circular into a table top, you will need certain materials and tools. This list includes:

Sheet of laminated plywood. Approximate Dimensions thickness - 15-20 mm;
Wooden beam. Its dimensions are 50 by 50 mm;
High quality board;
Switch;
Socket;
Electrical cable;
Glue;
Paints and varnishes;
Self-tapping fasteners;
Electric jigsaw;
Screwdriver or electric screwdriver;
Ruler;
Household drill.

Determine the sizes at your discretion. But if table circular will have too compact dimensions, you will not be able to cut long workpieces with the required comfort.

When choosing sizes, focus on the parameters of the most frequently processed workpieces. The dimensions of the table must be such that the product fits completely on the tabletop. This will allow you to use a Bosch tool to cut lumber efficiently and smoothly with your own hands.

Assembling the tabletop

When everything is ready, you can start working with your own hands. Let's assume that Bosch power tools you have already chosen, or preferred an analogue of a trusted manufacturer represented by Bosch.

The approximate dimensions of the tabletop, taking into account the selected materials, are 50 by 50 by 25 centimeters. You can make the size of your table larger or smaller depending on personal preference, the size of your workshop, or the characteristics of the Bosch circular saw you are using.

Taking a laminated sheet of plywood as a basis, cut out a tabletop of the size corresponding to the selected parameters. The plywood may not be laminated, but in this case it will need to be coated with a layer of varnish. Apply markings from below so as not to spoil appearance future table. By using electric jigsaw cut off the excess, clean the edges.
Turn the sheet over with the bottom side up and mark it for mounting the hand-held circular saw. To do this, remove the saw blade from your circular saw and place the sole of the device against the surface of the sheet. Make marks on the sheet itself and the sole for future fastenings.
Using a drill, drill the holes required for bolted connections. Screw the bolts from above through the table, and from below the structure will be held on by nuts. Here it is recommended to countersink the holes on the working side of the sheet and grind the bolt heads. They won't perform that way.
If you are going to cut material on a machine using a Bosch circular saw different angles, the hole for the saw blade should be made a certain shape- inverted trapezoid. If you plan only for smooth cutting, it is enough to cut a standard type of groove.
Do not rush to immediately cut the hole according to the markings. Take the circular saw again, attach it to the sheet, check the size matches, after which you can continue working.
Use a pencil to mark where the stiffeners will be installed. To make them, use wooden board. The ribs are located below, retreating from the edge of the tabletop about 8-10 centimeters.
It is recommended to mount the tabletop legs to the stiffeners. To fix the ribs, use self-tapping screws, screwing them with a screwdriver in increments of 15-20 mm. It wouldn’t hurt to additionally glue everything with PVA glue. Self-tapping screws must be screwed through the top of the desktop, while recessing the heads of the fastening elements. Using long screws, do not forget to connect the stiffeners together.
Using timber or boards, cut out blanks to create the legs of your structure. The length can be 100-120 centimeters. Here you should focus on your own height, since it will be uncomfortable for a tall master to work on a low table. If the legs diverge slightly towards the bottom, this will give them more stability. Fixation is carried out according to the bolt-nut principle. It is a good idea to use washers between them. By making a screed from timber, the desktop frame will be more durable.
You can adjust the height of the table using nuts that are screwed to the legs from below. M14 bolts are suitable for these purposes.
Now proceed directly to fixing the circular saw. Insert the disk into the made slot and secure it with the appropriate fasteners.
It is recommended to screw the socket on the inside of the table, connect the wiring to it and place the switch in a convenient but safe area. Press the on/off button onto the body of the circular saw and secure it.
Using a square pipe and screws with wing nuts, a longitudinal stop is made. Cut the pipe according to the length of the table for the circular table, drill holes for screws 30 mm from the edge of the table top. Using pieces of plywood, a pair of clamps is made.

As you can see, there is nothing complicated in assembling a table top for a circular table. A little time and the design is ready.

A circular saw is used to cut wood lengthwise. Its cutting base is a disc-shaped plane with a jagged outer edge. Such saws are not only hand-held, but also fixed on a table. How to make a universal table for a circular saw so that this cutting tool can be installed on it? Below are several ways to make a table for a circular saw with your own hands.

DIY table for a circular saw

How to make a table for a circular table from chipboard? To make such a table for a circular table, you need:

sheet of laminated plywood 9-11 mm thick (800x800 mm);
4 sheets Chipboard thickness 16 mm (400x784 mm);
several bars 40x40 mm;
several bolts and screws;
aluminum cornice.

On such a table you can attach any hand-held circular saw with a large blade. Drawings of a table for a circular table of this type can be easily found on the Internet.

This saw is manufactured in several stages:

Guides for a circular saw are made of timber or aluminum cornice.

The second version of the table for a circular table. Photo of manufacturing technology

A do-it-yourself saw table is made from boards, which is the most available material, often. To make this table you will need:

plywood sheet (thickness 20 mm and above);
boards 50 by 100 mm;
bars 50 by 50 mm;
several screws;
wood glue;
one of the types of wood varnish.

A blank with a hole is cut out of a plywood sheet using a jigsaw - a tabletop in which the saw will be placed. When marking the holes, follow the dimensions of the saw blade. Stiffening ribs are made from the boards, which will be attached to the tabletop with self-tapping screws. During the fastening process, the boards are tightened using clamps. A start button is later installed on the front stiffener. To make the legs, use boards about a meter long. They are attached externally to the stiffeners with bolts.

Video of a circular table made from a hand-held circular saw

Examples of finished tables for a circular saw

Making a table for a circular table with your own hands is not always advisable. It can be bulky and awkward and difficult to adapt to precision wood cutting. Therefore, if you don’t mind spending a certain amount of financial resources, it is better to purchase factory-made tables. They are made of durable and easy-to-use materials, safe when turned on electric current, and also have a factory warranty in case of breakdown.

The Jet JBTS-10 circular saw has a retractable table on each side, increasing the area suitable for work. Thanks to the belt wire, the cut is noiseless, and the service life of the electric motor is also increased. The presence of an eccentric clamp prevents the machine from moving during operation, which makes its use convenient in any conditions.

When using a table saw Caliber EPN-1100, it is possible to saw wooden materials in the longitudinal and transverse direction, as well as at different angles. The level of saw inclination can be selected and fixed.

IN sawing machine Enkor Corvette-10M 90101 used side and parallel stops, which greatly simplifies the work. Saw blade When cutting, you can tilt it at an angle of up to forty-five degrees. Can be connected to the machine industrial vacuum cleaner, removing wood dust. At the same time, the device is characterized by lightness and small dimensions.

The use of a stationary circular saw Einhell TC(TH)-TS 820 allows you to work with lumber in mass production conditions. It is a suitable tool for processing not only wooden, but also fiberboard workpieces. The design of this model provides a hole into which devices that perform wet and dry cleaning of the machine are connected. Moreover, the equipment is so compact that it can be installed on any workbench.

Contents:

In a well-equipped carpentry workshop, set up in a country house or in a private house, it is necessary to have a circular disk mechanism that allows processing wood blanks.

Very often used as household woodworking equipment homemade machine, made on the basis of a hand-held circular saw or cutting tool with independent electric drive.

To place any of these mechanisms, you need a specially equipped table with a surface that makes it easy to work with wood workpieces.

Depending on the type of cutting tool, as well as on the material used to manufacture the frame, the table for a circular saw can have the following designs:

firstly, it can be made in the form of a workbench with legs and with a hand-held circular saw attached to it (a lightweight version);
secondly, it can be a structure equipped with a cutting disk, mounted on metal frame. The drive part of such a machine, consisting of an electric motor and control circuits, is located in the lower part of the frame (capital version).

Making a table for a circular saw is within the capabilities of every craftsman.

Design selection

Before you make a table for a circular saw with your own hands, first of all, you need to decide on its design. Thus, a lightweight version based on plywood and beams must contain the following mandatory elements:

tabletop directly;
plywood body;
Support legs provide good stability
The capital structure must include the following components:

bed based metal profiles or corners;
upper and lower brackets necessary to accommodate the cutting blade with shaft and drive equipment, respectively;
the table itself with a slot for the cutting blade, mounted directly on a metal frame.
The most accessible for production in living conditions counts wooden table for a circular saw (i.e. lightweight design).

A lightweight version of a circular saw table would look something like this

Preparation of sketch, material and tools

As an example, consider the manufacturing procedure wooden workbench approximately 100 - 120 cm high. Before making such a table with your own hands, it is advisable to prepare a small sketch in which the device will be displayed future design indicating the dimensions of its main elements.

The exact height of the table is set taking into account the height of the master working on the machine (the location of the working plane at the level of the person’s hips is considered comfortable).

On preparatory stage you should also decide on the material for the manufacture of the future structure, which, as a rule, is made from beams and multi-layer plywood 28 mm thick.
In order to make such a table with your own hands, you will need the following blanks:

metal sheet of suitable size;
standard sheet of thick plywood;
metal square pipe, from which the guides are made;
a set of clamps in the amount of two pieces.

To assemble the table, you also need a tool set of the following items:

screwdriver and electric drill;
jigsaw or regular wood saw;
square, tape measure, ruler (for current measurements);
manual frezer

Video: Making a table for a circular saw

Making a table cover

The manufacturing procedure for this structural element involves the following operations:

Work begins with marking and cutting out a piece of plywood, the dimensions of which must correspond to the dimensions of the prepared iron sheet.

After adjusting to size, the surface of the workpiece is carefully sanded using emery cloth.

Then fixation points are marked on the bottom surface of the plywood sheet actuator with simultaneous marking of the slot for the cutting disc.

To do this, you should first try on the soleplate of the circular saw you are using at the installation site. In this case, it is most convenient to simply remove the disk from it and determine the exact location of the landing points.

Before installing it at the mounting location, an additional check is made to ensure that the slot for the cutting blade is correctly marked.

Marking the table top is done directly along the sole of the circular saw

At the final stage working surface closes steel sheet with two guides, which is then fixed with ordinary screws.

Subsequently, along the guides, it will be possible to make special markings from the corners, increasing the convenience of processing wood material.

Additional information: To arrange the operating surface of the table, in addition to plywood, plexiglass or fiberglass can be used.

Assembling the frame with legs

The base or frame of the table is assembled from a set of transverse and longitudinal wooden beams, which are attached to the bottom of its cover, increasing the rigidity of the entire structure as a whole. For this, four bars with a cross section of 50x50 mm, placed at a distance of about 7-9 cm from the edge of the table, are sufficient.
They are fixed on the bottom of the lid with self-tapping screws of suitable size in increments of approximately 23-25 cm. front side fastening elements are recessed into the material, completely hiding their caps.
The frame can be made stronger by pre-treating the mating surface of the bars with a layer of wood glue, carried out immediately before attaching them. After joining the glue-coated workpieces, the latter are securely fixed with clamps, which are removed immediately after the adhesive has dried. The legs of the structure can be made from bars of the same cross-section as the blanks for the frame (50x50 mm).

The structure of the table must be strong and rigid

The shape of the legs is chosen so that they provide maximum support area for the frame part of the base and have a shape that tapers towards the flooring. On one of these legs, controls for turning the circular saw on and off are subsequently placed, duplicating the buttons located on its body.

You will be able to further increase the rigidity and stability of the entire structure with the help of a set of steel angles mounted in the area of its butt joints. To secure them, it is recommended to use standard bolts with washers, which should preferably be installed with their heads facing outward.

Features of manufacturing a metal frame (bed)

The upper part of the metal base is a welded frame measuring 800x800 mm with legs made of pipes 220 mm long and a cross-section of approximately 17-20 mm welded at the corners.

Two longitudinal profiles are mounted on a frame made of 25 mm angles, used to install the shaft on bearings.

To ensure greater stability of the structure, the lower part of the frame is welded from larger corners (40 mm) and has two jumpers intended for mounting the electric motor with starting equipment circuits. Pipes are also welded at its corners, having the same length as on the upper frame, but slightly larger in diameter (23-25mm).

Closer to the edge of such pipe legs, threaded holes are prepared in which special holders are located (they are also called “lambs”). With the help of these wings it will be possible to fix the position of the pipes of the upper part of the frame, which is moved to regulate the tension of the drive belt.

Expansion of functionality

In conclusion, let’s touch on the topic of expanding the functionality of the products you manufacture. working structure. In the presence of free space Additional woodworking equipment can be mounted on the operating surface ( electric plane or a router, for example). Having a plane and a wood router will allow you to expand functionality machine and turn it into a full-fledged woodworking center.

In addition to this, such a router can be equipped special mechanism adjusting the position of its working part, changing within specified limits (the so-called elevator).

Circular plywood drawings. How to make a simple DIY table for a circular saw