To buy sliding doors from the company, you need to call or visit the office. The company is located in convenient location Moscow region in good transport accessibility. You can contact us daily at any time by calling in advance.
If your opening is standard and there are no special design elements in the doors, then you can order their production remotely. But if the size and shape of the opening is non-standard, then it is better to make an appointment with a specialist. This is provided completely free of charge. You pay only for the fact of production and installation finished product at a specific place. The wizard will help you choose the color of the material, brand of fittings and other details.
Our advantages
We have the most low price for any sliding doors, which can be purchased in Moscow. Therefore, if you want to save money, but at the same time get a high-quality and durable product, then we are ready to fulfill your order on time and in accordance with the customer’s requirements.
If necessary, glass inserts can be used in the doors, matte plastic, glass with sandblasted painting and colored designs.
We apply individual approach to each client when developing the design and unique design sliding doors, so the final result always turns out to have the required characteristics. And exceeds all customer expectations.
After the doors are produced, we deliver them throughout the capital and region. We provide a long-term warranty of 2 years.
Compartment doors help to rationally use free space and do not require extra space to open. Advantages of compartment doors:
-Stylish solution for modern interiors.
-The choice of materials for filling and combinations is unlimited, helps you find optimal solution for a room with any design.
-Sliding doors will help you forget about drafts.
-Pets cannot open the compartment door.
-It is impossible to accidentally trip on the sliding door; spontaneous opening is excluded.
Wardrobe doors
5 reasons to order sliding doors from Al-mebel
1. Production
We are manufacturers; we do not repurchase or resell anything, but produce. We control the quality and timing ourselves, we store the materials in our warehouse, so we are not dependent on suppliers.
2. Price
The price of the product does not change with the arrival of the measurer and remains lower than that of competitors by 20-50 percent. We do not display samples in expensive shopping centers, as we save your money, but we also do not hide anything, our sliding doors can be seen at the address: Bibirevo metro station, Pleshcheeva str., 12a, trading house "Dresden", 2- oh floor.
3. Timing
The order completion time is three days, discussed when signing the contract. Penalties are provided for violations in accordance with current legislation.
4. Quality
Confidence in the quality of our products came with European equipment. We have CNC machines and production is 80 percent automated. Come and we’ll show you.
5. Warranties
The warranty on our products is 2 years. We have not changed our office address for 12 years, so it will be easy to find us. When concluding an agreement, in addition to the company details, personal details are indicated
Wardrobe doors
Doors for a sliding wardrobe consist of a filling (insert) and a frame around the perimeter in the form of a profile, which, among other things, serves as a handle for opening. They occupy 85 mm from the depth of the cabinet, can be more than 3 meters in height and up to 1. 2 meters in width (depending on the filling). The sliding doors for a sliding wardrobe built into a niche are structurally identical to the doors for a cabinet cabinet, only the types of fastening and the installation algorithm differ.
Doors for sliding wardrobes are universal, suitable for sliding wardrobes and for interior partition.Sliding doors for sliding wardrobes are convenient because they do not require additional space to open (important for small room) and practical, their design is simple, there is simply nothing to break.
Interior sliding doors made of tempered glass
Glass interior sliding doors are made of tempered glass 8-12 mm thick. Externally lightweight, absolutely safe, they will decorate a hi-tech interior. They can be used as sliding partitions, they do not have lower guides or thresholds. Interior glass doors coupes have high heat and noise insulation characteristics.
Wardrobe doors are an important part of sliding furniture. They form an aesthetic façade, decorate the room and prevent dust from entering inner space closet
A wide range of materials are used to fill the door. Often chipboard, MDF, glass, and mirror are used for this purpose. There are also rare and exotic Decoration Materials- bamboo, rattan, natural solid wood and so on.
The assembly technology and design of sliding doors makes them a universal attribute of a home or apartment. They can serve as part of a cabinet facade or interior partition. Moreover, in each individual case the design should be as practical as possible. There are a number of sliding door systems available for this purpose. They differ in appearance, profile type, mounting method, presence of a threshold, and so on.
Door design for sliding wardrobes
To fill wardrobe doors, they are used various materials. The most popular are chipboard and MDF. By using fibreboards and panels, real masterpieces of design are created.
Sliding wardrobe "Armadio"
Sliding wardrobe "Shine"
Sliding wardrobe Lady
Photos of sliding wardrobes are presented in our photo gallery.
We invite you to take a look at the following ready-made solutions on the design of wardrobes. The photo gallery presents sliding wardrobes, which differ in:
- number of doors (two or more);
- purpose (children's room, bedroom, living room, hallway);
- the presence of glass and mirror elements;
- color scheme of the facade and profile;
- style (classic or modern style);
- internal filling;
- type of construction (built-in, cabinet cabinet);
- the presence of open shelves;
- decor (photo printing, sandblasting, etc.).
Examples modern design They will help you decide on the appearance of the furniture and get new design ideas.
A developed network of official representatives allows you to buy profiles and fillings for sliding doors at wholesale prices. And many of the companies provide the opportunity to place an online order with delivery.
3D wardrobe - convenient visualization of future furniture
The program is a convenient free application, which can be downloaded to your PC or laptop in the appropriate section.
Advantages of calculating a door system using a calculator:
- the program does not require an Internet connection;
- no special skills required;
- branded calculator contains all colors and types of profiles available in stock on the site;
- The program is updated when new systems appear in the range.
To use the program, just click the “Download” button and follow further instructions.
Video instructions for assembly and installation
To easily and without difficulty install sliding furniture or a partition, just watch a video on assembling wardrobe doors. Depending on the type of system (top-hung, bottom-hung, non-threshold), doors can be installed:
- directly into the closet;
- into the doorway.
Calculation of the size of wardrobe doors of the Ramir and Universal systems
Assembly and installation of wardrobe doors of the Puerta system
More videos about step by step assembly and installation of various door systems is presented in the corresponding section.
For each individual case there is a specific video with instructions.
Before installing the system, it is extremely important to calculate correct position doors. In the videos you will also find instructions for measuring openings and niches. Thanks to video instructions, you will cope with any task:
- taking measurements;
- door assembly;
- door installation.
The videos show in detail the options for fastening doors of various systems.
Filling wardrobe doors with MDF
One of the popular facade materials is MDF.
Functional and beautiful furniture is the key to comfort and coziness in every home, so you need to be careful when choosing such interior items. But what to do if there is no cabinet in the store that matches the design or size? Then the wardrobe can be assembled independently. But to do this, you need to learn how to make doors for a sliding wardrobe with your own hands, and then install them.
A wardrobe with a compartment design is a system, the purchase of which will make it possible to successfully plan the space of a room, highlight the features of the interior, and solve the issue of storing personal belongings. As soon as such furniture appeared on the domestic furniture market, buyers immediately fell in love with it for its huge number of advantages.
Many people are hesitant to assemble a cabinet themselves, but in reality it is not that difficult if you prepare and divide the work into stages. Start with purchasing necessary materials, the volume of which depends on the selected size of the structure. Therefore, the first thing to decide is what material to use and what size the structure will be.
The following materials are used to create compartment furniture:
- Chipboard - belongs to the category of common and affordable materials for making doors for sliding wardrobes. Chipboard is varied in color scheme, practical, easy to cut. If you decide to assemble a wardrobe with your own hands without experience in such matters, opt for chipboard;
- MDF is a more expensive material than chipboard, but it has higher performance characteristics. MDF is afraid of moisture, under the influence of which the film can become detached from the base, which will significantly worsen appearance furniture. But in general, a sliding wardrobe with 2 doors made of MDF looks very decent;
- solid wood is a durable, incredibly beautiful, wear-resistant option. But it’s not cheap, and it’s difficult to work with natural wood Only an experienced furniture craftsman can do this. If you are a beginner, it is better to choose a material that is easier to work with – chipboard or MDF.
The dimensions of a particular cabinet are selected for the room in which it is planned to be installed. Look around and take measurements to understand what length, width and height of furniture will work best. The height of such furniture may vary.
Models non-standard sizes made to order or independently. Experts insist that in small rooms the closet should be made as high as possible. This will allow you to fit it maximum number of things.
Facade options
Drawing and detailing
Today, sliding wardrobes are popular among residents of small-sized city apartments and owners of spacious country cottages, because they have high functionality, practicality, serve long time without breaking, they retain their visual appeal for a long time. You can fit such a piece of furniture into almost any room in size and style. And to spend a minimum amount on this Money, make the furniture yourself. How to make doors for a sliding wardrobe and what is required to start assembling sliding wardrobe doors? Drawings and drawing of details future design indicating where this or that fastening will be performed will significantly speed up the work.
Preparing parts
To save money, many people wonder if they can do it without help. experienced furniture makers and how to make wardrobe doors with your own hands. First, the parts to be installed are prepared. After selecting the most relevant material (chipboard, MDF or natural wood), the purchase of accessories has been completed, you can get to work. You will need to create a reliable frame from pre-prepared parts:
- two side walls;
- lid;
- bottom.
Shelves and storage systems will subsequently be installed inside the structure.
A sheet of selected material is cut using special equipment, which cuts out the described parts of the future cabinet with high precision. If special tools For this purpose no, you can order cutting of the material from professionals. After cutting, the parts are processed and covered with end caps to make them more aesthetically pleasing. Next, we’ll tell you how to assemble the doors and get a full-fledged piece of furniture at a minimum cost.
Sash design without filling
Profiles may be different, so they must be measured individually
Assembly
When the details of the future structure are prepared, assembly can begin. How to assemble a cabinet without mistakes? For this purpose it is created detailed diagram assembly and installation of doors on the wardrobe. Then, using a drill, you need to create holes in the sides, roof and base. Its individual parts are connected into a single frame using special fasteners. To increase the maximum level permissible load on the cabinet, the junction of the base and the top cover with the sides of the structure is reinforced with special metal corners. The back of the furniture closes thin sheet Chipboard, and supports are attached to the base.
You will also need holes for pins in the side walls of the furniture. This will be required for subsequent installation of shelves inside the product. If necessary, storage systems for certain types of things are installed inside the structure: vertical crossbars with hangers, trouser racks, and the like. If the assembly stage is completed, we proceed to the most difficult part. It is the installation of doors that will be the most critical process in the entire work.
Assembly diagram
Installation of profiles and frames
If you have completed assembling the wardrobe doors, you can proceed to installing the profiles and frames of the structure along which they will move sliding panels. However prerequisite is exhibiting door leaf exactly at the level, otherwise problems will arise during subsequent operation of the sliding wardrobe, and the level of comfort for the user will be low.
After measuring the length of the cabinet from the inside, using a hacksaw, cut a profile of a similar size and fix it on the top and bottom lids using a screwdriver and self-tapping screws.
To prevent damage to the profiles, when organizing holes, experts recommend using any convenient support. For example, you can use a table or chair for this purpose. And the holes made should be carefully sanded using sanding paper. The holes should be arranged on the profile with a pitch of 50 mm; this rule should not be violated so that problems do not arise during the operation of the structure in the future.
To securely fix the lower profile, it is worth organizing similar holes for self-tapping screws, but there is no need to rush to attach the guide inside the structure. It is important to choose the right place for its attachment. It is shifted inside the cabinet by 20 mm, since the depth of the furniture will decrease by the width of the compartment doors. Sometimes it happens that the doors are installed too deep. This spoils the appearance of the furniture, reduces its aesthetic qualities and comfort.
You will also need to install clamps so that the doors stop at closed position and no gap formed with the sidewall. The stopper is installed in the groove of the lower rail. To install the fastener in required location, close the compartment doors tightly, after which a mark is made on the bottom rail of the center of the wheel. A stopper is inserted here, which can be easily moved with a flat screwdriver.
To install the mirror in the profile, a silicone seal is used
The mirror is inserted into the profile frame
Three holes are made in the vertical longitudinal guides
Drilling the profile
The frames are fastened together with self-tapping screws
The lower profile fasteners are also fasteners for the lower rollers
Fastening the rollers
The guides for the door leaf are secured with self-tapping screws and press washers.
Door fastening
Next, we will describe in detail how to install a sliding wardrobe door with your own hands. Order step-by-step assembly doors and correctly selected tools are largely determined by the type of door being manufactured and the specifics of its fastening to the furniture body. This can be one of two models:
- hanging;
- rail
Hanging
Roller
Hanging
If you have decided to make hinged doors, then experts recommend starting to install doors on a sliding wardrobe with your own hands by studying the specifics of working with such systems. The 2-door wardrobe with hanging panels has a special compartment mechanism, which is not mounted inside the structure, but is superimposed on the facade. It consists of two guides, but the highest load falls on the top rail. Hanging mount sliding systems allows you to veil the ends and roofs of the side facades from the eyes behind the doors. As a result, the design after installing the cabinet doors looks incredibly laconic, elegant, and beautiful.
Hanging door fixing
Rail
The description of the installation of rail structures with your own hands differs from the description of the stages for suspended ones. The peculiarity is that the rails are mounted inside the cabinet frame. In this case, it is worth hanging the bottom one slightly offset into the cabinet, since it will bear the highest load.
Rollers need to be hung on the canvas, with the help of which it will move on the rail. Next, the canvas must be very carefully inserted one by one into pre-installed guides. To do this, place the upper part of the door into the guides, and then install the lower part.
To check the doors for perfect vertical alignment, you should use a spirit level. If you do the work carefully, there will be no need for adjustments at a later time.
Experts insist that rail doors on a cabinet cannot be placed at an angle, as this can cause deformation of the profile. Whatever design is chosen, do not forget that limiters will be required. This part must be attached to the cabinet door.
The video provides instructions for the step-by-step execution of the work by an experienced craftsman, who will once again demonstrate how to install doors on a sliding wardrobe. After viewing it, you will know exactly how to install a wardrobe door, and the instructions with photos will help make this process easier.
Roller mount