GSM modules for remote control of a heating boiler. GSM modules for remote control of a heating boiler Teplok boiler control

Monitoring the presence of 220 V, control room temperature, coolant temperature control, leakage sensor, relay output for heating boiler control. Alarm SMS to 3 phone numbers in case of loss of 220V, water getting under the leakage sensor, temperature drop below threshold values. Request current parameters by calling. Built-in battery for 2 days battery life, network adapter included. Does not require configuration or programming - insert a SIM card and the informer is ready to work. Android software

Heat informator TEPLOCOM GSM. Main characteristics

Heat informator TEPLOCOM GSM, system remote control boiler room via telephone, work via GSM channel, easy installation, effective management temperature conditions, control of boiler room operation, emergency notification, low system maintenance costs.

Heat informator TEPLOCOM GSM. Purpose

The TEPLOCOM GSM heat informer is designed to inform you about the state of the heating system and warn about emergency situations leading to a stop of heat supply, as well as control the heating system via the GSM channel. The TEPLOCOM GSM heat information device can be installed to control the boiler room of your home, cottage, or office.

Call the heat informator number and you will receive an SMS in response with all the parameters at the time of the call.

Everything is included!
No setup required!
Insert the SIM card and the heat exchanger is ready to work!
The TEPLOCOM GSM heat informer controls

You will receive an alarming SMS:
- in case of loss of 220 V
- when water gets under the leakage sensor
- when the air temperature drops below 17 °C
- when the heating temperature drops below 40 °C (temperature thresholds can be changed)
In the future you will be able to:
- change temperature thresholds
- turn the boiler on or off using SMS
Heat informator TEPLOCOM GSM. Installation and connection
- Insert SIM card
- Connect an external temperature sensor
- Connect the leakage sensor
- Connect the power adapter and plug it in
- Turn on the heat generator by holding the “On” button for 3 seconds
- Press the "On" button 3 times
- Call the heat informant number from your phone
- Heat informator TEPLOCOM GSM. Possibilities
  
  Managing the operation of a boiler room at home is quite difficult if you do not live in such a house permanently. But you want to be sure that “everything is in order” in the house, and you also want to come to Vacation home in winter and go to warm house. How to solve this problem?
  
  Today there is already modern system remote control of the boiler room via telephone, this is a TEPLOCOM GSM heat informer, which allows you to remotely monitor and manage autonomous heating in your house
  
  The TEPLOCOM GSM heat information device allows you to remotely monitor your home boiler room during your absence. With the help of Teplokom GSM you can warm up your country house or cottage in advance if you do not live there permanently. The heat informator will prevent pipes from freezing during the cold season by setting the minimum heating mode. The TEPLOCOM GSM heat information device significantly reduces fuel consumption through remote control of the operating modes of heating boilers. TEPLOCOM GSM will allow you to receive useful information about the operation of your heating system and diagnose equipment operation

Teplocom GSP is a heat information device designed to instantly inform home owners about the status of the heating system. This device also warns of emergency situations and provides the opportunity remote control heating system. What are the capabilities of the device, how is the Teplocom GSM module connected to the boiler, and what characteristics does this device have?

System characteristics

The modern Teplocom GSP thermostat for heating boilers has the following technical characteristics:

operating voltage – 5 V;

temperature range – from +5 to +40;

temperature control – from +1 to +85;

built-in battery capacity – 2200 mAh;

relay control – 100 mA, up to 300 V;

number of supported numbers – 3.

The system supports one main number from which the heating system is controlled, and two additional telephone numbers. They receive notifications in case of emergency situations.

Installation and connection

The installation process and connection to the heat exchanger will not cause problems. Follow the algorithm:

Insert the SIM card into the slot provided for this purpose inside the heat exchanger housing.

Connect the remote temperature sensor to the special slot - it is marked.

Connect the remote leak sensor into the slot provided for it on the housing.

Connect the network adapter to the heat exchanger, plug it into the network, and turn on the device.

Press the “ON” button three times, then call the device’s SIM card from your phone.

After completing these steps, the thermostat is completely ready for operation. However, you still need to connect it to a controlled heating boiler. This can only be done if the boiler has outputs for connecting an external thermostat. From the factory, boilers have these contacts numbered “3” and “4”, and they have a jumper on them. It must be removed, and then the outputs of the heat exchanger must be connected to the inputs on the boiler.

Device management

To find out detailed information about the condition of the boiler, just call from your phone the number of the SIM card installed in the heat informer. Immediately after this, an SMS notification will be sent to your number. It will contain detailed information about the condition of the equipment. Alerts also come in the following cases:

Turning off the power supply to the heating boiler.

Liquid getting on the thermostat leakage sensor.

The temperature drops below the set value.

You can turn it on and off using SMS messages heating system. It is also possible to configure two critical thresholds. By default it is +40 and +17 degrees. If the temperature in the house drops below a specified threshold, an SMS notification about this is immediately sent to the home owner’s phone.

Conclusion

Teplokom GSM – convenient and modern solution For remote control and changes in boiler operating modes. One of the advantages of the system is that it monitors not only the temperature, but also the leaks. The cost of the system is within reasonable limits - from 6,000 rubles. Good investment to your comfort.

Remote control of heating equipment is carried out via a GSM channel - through cellular networks. For this, GSM modules with sensors connected to them are used. Their features and advantages:

Possibility of control from anywhere in the world;
Remote control of home microclimate;
Opportunity to save on utilities;
Additional monitoring of safety sensors.

GSM modules for remote control of control boilers use networks for their operation mobile operators. This opens up the possibility of controlling heating equipment from anywhere where there is access to cellular networks and mobile internet. They work not only with boilers, but also with additional equipment, which allows you to control several heating circuits from anywhere. A couple of actions on your smartphone - and by the time your household arrives, the house will have a comfortable temperature.

Temperature sensors are used to operate GSM modules. They control indoor and outdoor temperatures by sending data to control thermostats. The connection is made via wires or radio. In addition to temperature sensors, GSM modules can be connected security sensors(movement and door opening), gas leakage sensors, water leakage control sensors and acoustic glass breakage sensors. All this provides control over the climate and safety of housing.

GSM modules control heating boilers according to principle room thermostats. They turn the burner on and off, which leads to heating and cooling of the coolant. It is also possible to control valves responsible for supplying hot coolant to additional circuits. This ensures control over several zones at the same time - this is important for large private households and country cottages.

The use of GSM modules for remote monitoring allows you to save on gas and electricity consumption. During the daytime, the temperature in the premises can be reduced, which helps reduce energy consumption. Towards evening, the temperature in the rooms rises, in time for the arrival of household members. A similar climate control system is used in office and industrial premises.

You can buy GSM modules for controlling heating boilers in the Teplodvor online store. In addition to them, wired and wireless temperature sensors, outdoor thermometers, security sensors, power supplies, radio key fobs, smoke detectors and much more are on sale. We will deliver equipment for remote control of heating and climate control anywhere in Moscow and Russia.

industrial conditions

paint and varnish products

refrigeration units

Step-by-step instructions

electrical resistance

gas boiler

universal pipes

Control of 220 V availability, room temperature control, coolant temperature control, leakage sensor, relay output for heating boiler control, 3 inputs for external contact sensors. Radio channel controlled socket (can be expanded to 5 pcs.) - turn on/off 220 V, 16 A devices (control via SMS). You can connect a temperature sensor to the outlet - the data is transmitted via radio. Temperature control modes based on the heat informator sensor and radio socket sensor. Alarm SMS to 3 phone numbers when 220 V is lost, water gets under the leakage sensor, or the temperature drops below threshold values. Request current parameters by calling. Built-in battery for 2 days of autonomous operation, AC adapter included. Does not require configuration or programming - insert a SIM card and the informant is ready to work

TEPLOCOM Pro GSM heat informer, boiler room remote control system via telephone, operation via GSM channel, simple installation, effective temperature control, boiler room operation control, emergency notification, low system maintenance costs.

The TEPLOCOM Pro GSM heat information device can be installed to control the boiler room of your home, cottage, or office.

Call the heat informator number - you will receive an SMS in response with all the parameters at the time of the call.

Key Features:

Everything is included!
No setup required!
Insert the SIM card and the heat exchanger is ready to work!

You will receive an alarming SMS:

in case of loss of 220 V
when water gets under the leakage sensor
when the air temperature drops below 17 °C
when the heating temperature drops below 40 °C (temperature thresholds can be changed)

In the future you will be able to:

change temperature thresholds
request the informant's SIM card balance
turn the boiler on or off using SMS
on/off radio controlled socket
change boiler temperature
Heat informant TEPLOCOM Pro GSM. Installation and connection
Insert SIM card
Connect an external temperature sensor
Connect the leakage sensor
Connect the power adapter and plug it in
Turn on the heat generator by holding the “On” button for 3 seconds
Press the "On" button 3 times
Call the heat informant number from your phone

The TEPLOCOM Pro GSM heat information device allows you to remotely monitor your home boiler room during your absence. Using TEPLOCOM Pro GSM, you can warm up your country house or cottage in advance if you do not live there permanently. The heat informator will prevent pipes from freezing during the cold season by setting the minimum heating mode. The TEPLOCOM Pro GSM heat information device significantly reduces fuel consumption through remote control of the operating modes of heating boilers. Teplocom GSM will allow you to receive useful information about the operation of your heating system and diagnose the operation of the equipment

Peculiarities. The TEPLOCOM Pro GSM heat informator provides

monitoring the presence of a 220 V network
discharge control battery heat informant
indoor air temperature control
coolant temperature control remotely via radio channel
radio control of remote sockets (up to 5 pcs.) to turn on/off the load
notification via SMS messages:
- when disconnecting/connecting the 220 V network (with a delay of 2 minutes)
- when the battery of the heat exchanger is discharged
- when the air temperature in the room decreases/increases relative to a given threshold
- when the temperature of the coolant in the heating system decreases/increases relative to a given threshold
- when the state of the radio sockets changes (there is no radio communication for 60 minutes)
- when the state of the inputs for connecting sensors 1-3 changes
information via three cellular network numbers (one administrator number with management rights and two numbers for information only)
work in three modes:
- without temperature control
- temperature control mode using an external temperature sensor of the radio socket
- thermostatting mode using the internal temperature sensor of the heat informer or the internal temperature sensor of the radio socket
turning on/off the heating boiler (if it has such an option)
control and configuration of heat informator, radio socket using SMS commands

Specifications:

Supply voltage (mains adapter)
Temperature range of heat informator operation, °C
Coolant temperature control in the range, °C
Backup battery built-in Li-ion	quantity, pcs.
	rated voltage, V
	capacity, mAh
	standard size	18650 with protection
Control relay output characteristics	maximum current, no more than: mA
	maximum voltage DC, no more, V
Characteristics of the power relay of the radio socket (load switching)	maximum current, no more, A
	maximum voltage, no more, V
Number of control (main) cellular numbers, pcs.
Number of registered (additional) cellular numbers:, pcs.
dimensions WxHxD, no more, mm
Weight, no more than NET (GROSS), kg

Advantages of purchasing from TD Aktiv-SB:

Information about technical specifications, included in delivery and appearance product is for reference only and is based on the latest information available at the time of publication