Interesting ideas for crafts made from foam. Garden figures made of polyurethane foam

What can a person come up with! It would seem that from an unnecessary thing that just needs to be thrown away, you can make something unusual and useful, breathe new life into it.

Usually for summer cottage adapt old ones car tires, tires, sheets of plywood, old stumps and snags and other items.

Have you ever thought about what you can do? interesting crafts from polyurethane foam for a dacha? Some people have probably heard about this, but most were probably surprised. Therefore, today we will tell you what can be done from of this material and how to turn it into a craft.

What crafts can be made from polyurethane foam for the garden?

Polyurethane foam is a very common material in construction. With its help, seams and voids are sealed, in which it expands, filling the entire space. After hardening, it becomes hard, but has little weight. When creating crafts from it, it is worth considering the basic properties of this material. In addition, polyurethane foam can be easily trimmed.

Why can it be used to create crafts? The fact is that polyurethane foam takes any shape, and its positive property is resistance to various unfavorable factors environment - allows you to display crafts in the garden. They are not afraid of precipitation or frost.

Light weight and the absence of sharp edges and corners make such crafts safe for kids. Therefore, you can safely place your masterpiece on the playground. You can also make a fairly large structure from foam, which, as mentioned above, will have little weight.

The most popular figures from polyurethane foam are various animals: frogs, sheep, hedgehogs, cows, etc. They will look great near a pond, flower bed, on a playground, near trees and shrubs, and even in the middle of a lawn.

The craft can be either stylized, cartoonish, or very “alive”, similar to a real animal. It all depends on your personal preferences.

In addition to animals, you can make stylized mushrooms beautiful flowers. They look no worse than those made from stone, stump or wood.

If you really want to, you can even build a mini-house, an airplane, a tower and other similar structures. In addition, making garden crafts from polyurethane foam is very interesting activity, which will help take free time. And the ease of working with this building material will not require any special expenses from you.

We make garden crafts from polyurethane foam with our own hands

When working with this material, you should follow some rules. Thus, polyurethane foam has the property of quickly setting to the surface with which it comes into contact. It’s the same with our hands - they need to be protected from foam adhesion. To do this, you will need fabric gloves (cotton), and have several pairs of them.

You should also prepare a special cleaner in advance, with which you can clean the mounting gun. By the way, you will also need it, just like the polyurethane foam itself.

Having purchased everything you need and decided on what your craft will look like, you can get to work. The technology is not complicated, you need to make a figurine frame and cover it with layers of foam, each of which dries for about 15-20 minutes. Any available materials are suitable for the frame: boards, old unnecessary pots of different diameters, various banks and other containers.

It’s like an artist draws a picture - first the circles, squares and ovals that make up the figure, and then begins to draw out the details. It’s the same here – fill the mold on top and use a knife to give it the features you want.

The finished figurine can be painted and varnished on top. This simple technology will allow you to create almost any craft for the garden.

Now let's look at a few specific examples . It's very easy to make a cute hedgehog. This craft is perfect for a beginner. In addition to the materials discussed above, you will also need toothpicks. We make an ellipse out of foam, which will be the body of the hedgehog. When it hardens, cut off the excess, forming a figure. To make the hedgehog smooth, you can paste it over in several layers toilet paper with PVA glue.

After that, we start sticking toothpicks. Moreover, they can first be dipped 3/4 in black paint, and the ends in gold. It is better to paint the hedgehog itself before attaching the “needles”.

It's also easy to do and ladybug . Fill the hemisphere and cut it out the required form, then color it. When selecting paint, be careful; it should not corrode the polyurethane foam.

If your vase breaks, do not rush to throw it away. It is enough to cover it with foam, which will hold the shards together, and when it hardens, cover it with paint. Gold or silver coloring looks beautiful, and the vase itself does not need to be cleaned. Leave it textured and lumpy.

More complex crafts require some skill and more time. For example, to create a deer, the most difficult thing is to make the frame. Large ones are suitable for the body plastic bottles, the legs are made of wire, and for the muzzle there is a glass.

Then we slowly apply layers of polyurethane foam one by one. Then we clean it, give it its final shape, prime it with paint (acrylic), apply varnish and paint it. As a result, you will get a cute fawn, almost like a real one.

To decorate your personal plot, you don’t need to complete art courses and have “golden hands”. A small set of tools, a little diligence and abstract thinking will allow you to acquire gnomes, frogs, sheep and Christmas trees from quite affordable material.

Manufacturing technology

First things first, you need to stock up necessary materials and tools. This will determine how high quality and quickly the manufacturing process goes:

Plastic bottles are suitable for the frame of the product boards filled with sand, metal objects and thick wire. Even an ordinary brick can become the basis for a future mushroom on your site!
Polyurethane foam.
Gun for polyurethane foam.
Gun cleaner.
If you plan to grow flowers in a sculpture, then you need to mount some kind of container in the center of it, such as a bucket, tin can or the same plastic bottle.
Varnish, paint and brushes for them.
Stationery or other knife.
Several pairs of gloves. This item is required, since the polyurethane foam sticks to your hands quickly and for a long time!

In the photo there are foam mushrooms:

The process of creating garden figures itself consists of two alternating processes. First, apply foam to the base and let it harden a little. Then we apply it again and so on until we get closer to the shape we need.

After this the usual stationery knife excess protrusions are removed, the sculpture acquires its finished shape and can be coated with paint. The entire work can take from an hour to several days, depending on the size of the figure and the thickness of the applied layer. It is advisable to do all this in a separate dry room, where there is no excess dust and children do not run around. Otherwise, you will have to wash off the extremely sticky substance, which is polyurethane foam, with gasoline or acetone.

This video explains how crafts are made from polyurethane foam:

Manufacturing examples with instructions

Below are a few examples of different figures that even a beginner can create on their site. The main thing is to strictly follow the sequence of all operations. And in a few hours you will definitely feel like a real creator, from whose hands comes an excellent decoration for your summer cottage!

Christmas tree

Making a Christmas tree from polyurethane foam is as easy as shelling pears. To do this, you need to collect twigs and attach them to an iron pipe. This can be done with tape or wire.

After this, you need to wet the workpiece with a spray bottle so that the foam “sticks” to the base more firmly.

Green acrylic paint is perfect for creating a New Year's mood using such simple things as scraps of sticks, twigs, polyurethane foam and fishing line.

Ball

The ball is the easiest figure to make. It is recommended to start your creative experiments with it, and only then move on to more complex decorations and sculptures.

Take a paint can and fill it with sand;
Layer by layer we apply polyurethane foam;
Upon reaching the required size and more or less spherical shape, remove excess parts with a knife;
We coat the product with varnish;
We choose paint for our decoration depending on our preferences;
If it is a bun or the head of some animal, we make eyes, a nose and a mustache from buttons, fishing line and wire.

Ram and ewe

First we make the frame. We take several plastic bottles and fasten them with tape. The result will be something like a “skeleton” of an animal. The lower “limbs” can be filled with sand to make the figure more stable.
Next, you can apply foam. But to save it, it is better to wrap the frame with isolon or other polymer material. The first layer of polyurethane foam - you can already roughly imagine what the end result will be!
We make ears from pieces of leather. You can also make them from plastic bottles by preheating and bending them.
We process the muzzle with a knife, carefully giving it the necessary features.
We coat the product with varnish.
We paint the eyes, mouth and other “features” of our sheep or lamb with paint!

Goat

We make a frame from thick wire, which we wrap around several plastic bottles.
It is better to use metal pipes as a frame for the legs (bones). They can be welded to a pedestal, dug into the ground, or secured with bolts. Your figurine must withstand wind and rain, so take the time to securely secure the base.
Apply one or two layers of polyurethane foam.
We make horns and a tail from wooden sticks or plastic cuts and secure them.
After applying the last layer, we cut off all excess and wrap the product with sickle or fishing line.
Cover the surface with primer and paint. You can choose any color, because it is completely your creation!
Making eyes from buttons.
We place our goat next to a pond, in a clearing, in the company of other decorations, etc.

In total, this sculpture will take one to two weeks to complete as each layer of foam needs to harden. As a result, from unnecessary pipes, plastic bottles, wire scraps, other “garbage” and several cans of polyurethane foam, you get an excellent decoration for your summer cottage!

New Year's crafts

Even with nothing on hand other than wire and a can of polyurethane foam, you can create excellent New Year’s decorations. Various ornaments, Christmas decorations, simple and complex figures - all this is accessible and simple!

For example, you can make a snowflake. We take a wire of such thickness that it can be bent without effort. We make the frame of a future snowflake out of it. Carefully apply one or two layers of foam. Before it hardens, we achieve even and smooth surfaces. If something goes wrong, you can always add a little foam and cut off the protrusions with a regular stationery knife.

Making a Christmas ball is even easier. The tennis ball is covered with a layer of foam. After hardening, apply a layer of paint and decorate our New Year's toy in bright and positive colors!

A simplified version of the Christmas tree is done using cardboard or isolon wound on a rigid base in the form of a cone. Even a child can apply several layers! We level the surface, paint it and place it in a visible place.

Basic rules for working with polyurethane foam

Shake the container periodically.
The ideal temperature for work is room temperature.
Polyurethane foam does not like direct sunlight. Therefore, it is necessary to work in the shade, and ready product cover with paint.
The hardening time of the foam varies depending on the manufacturer, temperature and operating speed.

Important points

The paint used to cover the finished product must not contain nitrocellulose. Otherwise, the polyurethane foam will soften and the decoration will lose its shape.
Gloves are required element work. Without them, washing your hands will take much more time than the process of making the craft itself.
Polyurethane foam is very lightweight material . Therefore, heavy objects must be placed inside any product made from it. This could be a jar of sand, a plastic bottle filled with water, an iron base, metal pipes held together with wire, and other massive things.

It is not at all necessary to spend money on purchasing ready-made garden figures to decorate your site. Original crafts made of polyurethane foam will become a worthy element landscape design. The main thing is to show imagination and a little perseverance.

Properties of polyurethane foam

The scope of application of polyurethane foam is quite extensive. Now it has spread to the landscape design of the site. Garden figures, created with your own hands from polyurethane foam, are no worse than copies made on a production scale, and are often superior in decorativeness to crafts made from tires or plastic containers.

The special properties of polyurethane foam allow you to create crafts complex shape. Ease of processing makes creative activity accessible to weak women's or children's hands. In the process of forming a garden figure with your own hands, removing an extra fragment or adding a missing part will not be difficult. With proper decoration, the craft looks very presentable and does not show traces reuse raw materials, as is the case with plastic containers.

Attention! Garden figurines made from polyurethane foam are resistant to precipitation, but require protection from ultraviolet radiation.

An obstacle to creating crafts with complex configurations may be a lack of experience working with three-dimensional figures. Create something new from scratch, focusing only on flat image, poses a problem for some. Therefore, it is initially recommended to practice on simple garden figures. A mushroom, turtle or ladybug will be an excellent start for demonstrating the abilities of a sculptor.

Depending on the volume of foam used in the manufacture of the craft, it may take considerable time for it to dry completely. Usually the process lasts for a week. You should be prepared that polyurethane foam in the process of forming a garden figure can pollute the surrounding area, so it is recommended to organize work in an open area.

Colorful examples of do-it-yourself polyurethane foam figures are presented in the photo:

Available materials

The list of available materials varies depending on the garden figure chosen for making, but the constant set consists of the following items:

Polyurethane foam. It is better to replace a regular can with a tube with a pistol, which is much more convenient to work with.
A stationery knife for trimming unnecessary elements.
Latex gloves to protect your hands. Fabric products will quickly become unusable.
Sandpaper for sanding the surface.
Brush with paints intended for external use.

To create the frame of a craft, they usually use plastic containers and cans, rigid wire, planks, hoses and double-sided tape. If foam gets on your skin during work, a special cleaner or kerosene will help get rid of the dirt.

Advice! A garden figure made using polyurethane foam is lightweight, so at the formation stage measures are taken to make it heavier. Plastic containers can be partially filled with sand or small pebbles. The wire protruding from the paws of the animals will help to fix the craft on the ground.

General algorithm

Preliminary familiarization with the instructions for using polyurethane foam will reduce the likelihood of undesirable situations developing. Making crafts should be done on outdoors at positive temperatures. If work is carried out indoors, it is worth taking care of quality ventilation. Polyethylene film will prevent surface contamination; polyurethane foam will not stick to it.

Shake the can before use and keep the cap down when working. Otherwise, the gas will escape and the material will not be completely consumed. The polyurethane foam gains initial strength within an hour and completely dries in 10 hours. It all depends on the applied layer.

Apply in one go a large number of material is not recommended, the liquid substance may fall off. The optimal way to organize the work of forming a garden figure is as follows:

position the frame of the craft horizontally;
apply a small layer of foam;
give the material time to dry;
turn the craft over and repeat the steps.

When the foam dries again, the voids and missing fragments are filled in accordance with the selected outlines of the garden figure. Excess fragments are removed with a sharp stationery knife. To achieve a smooth surface of the craft, it is sanded sandpaper, fixed on a block.

Advice! Protect the garden figure from rapid destruction under the influence of sun rays putty is capable. This technique will provide additional leveling of the surface.

After the composition has completely hardened, the decorating stage begins. Usually it consists of painting a figure from polyurethane foam. Paints on acrylic base, which are applied in 2 layers. Additional tool decoration includes buttons, cords, wire for mustaches, pieces of glass to create a mosaic.

Typical crafts made from polyurethane foam for the garden

Studying a wide range of garden objects made using polyurethane foam, we can roughly distinguish two groups of crafts. In one case, the surface of the figures is smooth, in the other it is lumpy and often imitates the skin of an animal.

Leveled areas are often additionally covered with putty. This creates protective layer from UV rays. This technique is not used with rough garden figures.

It is unlikely that it will be possible to achieve the identity of an animal skin immediately after applying the foam; this will require additional manipulations. But the result of painstaking work is always impressive. The only exception may be the lamb, whose curls are so similar to the lumpy surface obtained from a liquid construction substance. Vivid examples of DIY crafts made from polyurethane foam are shown in the photo:

Representatives of the animal world are the most popular solution when creating garden figures. Less often they create objects of inanimate origin - all kinds of flowerpots, shoes and other objects, mainly intended as decorative stands for flowers.

Simple crafts

If you have no or insufficient experience in creating crafts, it is better to start the experiment with a light garden figure, for example a mushroom, the base of which is a plastic bottle. You will need to add a primer to the previously listed available materials and you can begin to get creative.

Main stages:

A plastic bottle, which acts as a stem, is filled with sand or pebbles to give the mushroom stability.
Polyurethane foam is distributed thin layer, the process takes place in several stages. A thickening is formed in the lower part.
The garden craft hat is cut out of polystyrene foam. Aim for perfect circle not worth it, slight asymmetry is quite acceptable.
You should try to form a cone-shaped figure or hemisphere from the polyurethane foam applied to the foam.
Strong wire is used to connect two parts of a garden figure. Gluing the parts will help strengthen the fixation.
Trimming of unnecessary protruding parts is carried out carefully so as not to damage the assembled craft.

Comment! The porosity of the polyurethane foam causes moisture to be absorbed, so it is recommended to treat the garden figure with a primer.

The absence of a primer layer will lead to the putty absorbing moisture from the polyurethane foam, this process will provoke cracking of the surface of the craft. After priming, the garden figure is covered with a layer of putty and left to dry. To make the mushroom smooth, the surface of the garden figure is treated with sandpaper, first medium-grit, then fine. To reduce paint consumption, the putty surface also needs to be coated with a primer layer. The color of the craft is chosen at your discretion, whether it will be cute White mushroom or bright fly agaric, depends on the wishes of the master. Varnish can add additional shine to the figure.

Large figures

When simple do-it-yourself polyurethane foam figures turn out quite well, the task of creating garden crafts you can complicate it and move on to larger objects.

Donkey

To form a popular element of landscape design you will need:

A 10 liter water container will serve as the body of a garden figure.
A 5 liter tin can or eggplant will act as a muzzle.
Wooden planks for feet.
The glazing bead or wire will become the basis of the tail of the garden figure.
A familiar set of tools that are used when making crafts from polyurethane foam.

When everything is prepared, begin the creative process:

First, connect two containers together; wire or tape will do the job.
A glue gun will help you secure the legs to the body of the garden figure.
The tail is inserted into a pre-prepared hole.
The eggplant is filled with sand to give the craft heaviness and stability.
When the frame of the garden figure is completely prepared, it is gradually covered with polyurethane foam. Take a break of 15-20 minutes between applying the next layer.
The ears of a garden figure can be made perfectly from flexible wire, which, after fixing, is also covered with polyurethane foam.
After drying, unnecessary protruding fragments are cut off sharp knife.
Applying further layers is identical to the algorithm for creating a mushroom. First, the craft is primed, then the surface is treated with putty, then sanded, primed again and painted. The final layer will be waterproof varnish.

Naturally, between each action, the polyurethane foam craft is given time to dry out the next applied layer.

Symbol of family happiness - stork

A stork looks incredibly cute on the site, the manufacture of which will also require polyurethane foam. The algorithm of actions includes the following steps:

A plastic 5-liter container serves as the body of a garden figure.
The stork's head will be located on the bottom side, the tail will be in place of the neck.
A thick wire will serve as the base of the neck, onto which the foam head is fixed.
At the discretion of the master, the long nose of a garden figure can be made from a small piece of wire or wood chips.
Long legs for crafts can be made from electrodes or plastic pipes. Both materials are subsequently buried in the ground, thanks to which the garden figure made of polyurethane foam becomes stable. Therefore, it is not necessary to fill the eggplant with sand to weigh it down.
You can make wings from pieces of foam plastic. They are screwed to the sides of the craft with wire.
Wrapping it with tape will help add additional strength to the connection between the head and the body.
When the frame of the garden figure is completely assembled, they begin to cover it with polyurethane foam.
After complete hardening, excess fragments are removed with a stationery knife with a sharp blade.

When the polyurethane foam is completely dry, proceed to decoration. As a primer for a garden figure, you can use water solution PVA glue, diluted in a ratio of 1:2. The body and head of the craft are covered with white paint, the tail and edging of the wings are made black, and the legs of the stork are painted red. You can use real feathers as a stork's tail. poultry, be it a goose or a rooster. When the garden figure is completely ready, the legs of the stork are buried from electrodes into the ground.

Review of original ideas

The choice of garden figures that you can create with your own hands using polyurethane foam is unlimited. Here is a modest list of original ideas:

A small artificial pond or waterfall will be perfectly decorated with a funny frog or turtle. Someone might want to become the owner of a crocodile or a monitor lizard - it all depends on preferences.
If children are relaxing on the site, they will like the presence of a craft in the form of a cheerful SpongeBob.
Bright ladybugs always attract attention.
Polyurethane foam will not require sanding if a lamb is chosen as a garden figure.
Sometimes the wire used to braid a frame with a complex configuration helps to create a frame with a complex configuration. plastic containers, and then gradually filled with foam.
The craft does not need to be coated with paint. Some masters of working with polyurethane foam offer to create a real mosaic on a garden figure from small pieces of mirrors or tiles.

In the process of creating any craft, it is important to let each applied layer dry thoroughly. This applies not only to polyurethane foam, but also to primer, putty and paint. If technology is violated, a garden figure can quickly become unusable.

Of course, everyone who often spends time in the garden wants to decorate and diversify the space around them. The easiest way is to purchase professionally made animal figures in a store. However, you have to pay for them, and it’s hard to resist the desire to create something unusual with your own hands. Very interesting option– make a craft yourself from polyurethane foam for the garden.

Crafts made from polyurethane foam: what is good and what is bad?

Foam is a special material. You can make figures of any size from it. The work does not require significant physical activity and subject to female hands. When working with the material, it is easy to remove excess or add missing details, and correct errors. A well-made craft looks professional and does not bear the marks of recycling, such as crafts made from tires or plastic bottles. The foam craft is not afraid of rain and snow, but it will have to be protected from exposure to solar ultraviolet radiation.

It is convenient to make a variety of figures from foam

There is another side to the coin. First of all, you should understand that three-dimensional figures are made from foam, which are not easy to copy without having a sense of proportion. It’s even more difficult to create something new with only a flat picture in front of you.

If you have not yet appreciated your abilities as a sculptor and do not have experience working with construction foam, it is better to start with a simpler craft and create a bun, a mushroom or a ladybug.

The material hardens in air long time, so be patient while waiting for the next layer to be ready. It will take a week to build a large craft. Foam gets very dirty, and it is better to carry out work with gloves, in a special place and in the open air.

The most interesting and characteristic foam figures

Of course, first of all, you need to “get acquainted with the assortment.” By carefully studying samples of existing creations, we can conditionally divide all crafts into two groups. Some have a smooth surface, others have an almost untreated surface.

The surface of these figures is carefully processed

Using the leveling of dried foam, you can make the figure of any animal and many other crafts. In this option, your work is well protected from ultraviolet rays sun. At the same time, a lot of time and materials are required.

The fox and the wolf have a “natural fur coat” made of foam

Particularly interesting is the imitation of animal fur using raw foam. This type of texture is difficult to produce from any other material. When done carefully, the animals literally come to life. In this option, you do not need to spend a lot of time leveling the surface.

The uneven surface of the foam suits these characters well

Making non-living objects from polyurethane foam is less popular, with the exception of imitation mushrooms. However, as follows from the photo below, using construction foam you can make a flowerpot, garden lantern and flower pots different types.

All items are made of polyurethane foam

Using this scheme you can build any craft

Almost any craft from polyurethane foam for the yard and garden can be built using general rules. Below is a set of basic tools. Note that you can use regular cans with a straw or pistol foam. Working with a pistol is much more convenient. When making a complex figure or a large number of products, it is better to purchase a pistol.

Material happens different quality, and cans provide different amounts of foam, which is directly related to the price of the can. The materials you will also need are paint, varnish and putty for external use. A variety of auxiliary materials are suitable for making the frame: plastic bottles, wire, pieces of wood, etc.

When making almost any foam figure, you will need a frame. The more the shape of the frame matches the type of future craft, the better the final result will be. It is convenient to use tape to mount the frame. Individual frame parts can be added to the structure sequentially as the next layer is applied. In addition to the above material, you can use a roll of paper, fabric or foam rubber wrapped in tape for the frame.

The foam craft weighs very little. To prevent the wind from knocking it over, you can pour sand into plastic bottles. To attach the figurine to the ground, you can also provide thick wires that will protrude from the legs of the animals.

Frames from different materials correspond in shape to future crafts

Before starting work, be sure to read the instructions for using the foam on the can. It is highly recommended to purchase a polyurethane foam cleaner to quickly solve “dirty” problems. Work should be carried out at positive temperatures in the open air or in a well-ventilated area. Use gloves. When working, it is convenient to use a bedding made of polyethylene film, to which the foam does not stick.

In the can, the foam is in the form of a liquid. When exposed to air, the material hardens. The container should be shaken before use. During operation, keep the can with the cap down. If this is not done, all the gas will escape and some of the material will not be usable. The foam gains sufficient strength within one hour. The material hardens completely in approximately 10 hours.

Polyurethane foam: regular and pistol

You should not try to apply a large amount of material at once, as the foam will fall off. It is better to apply a layer of foam on horizontal surfaces, let it harden for half an hour, and then rotate the workpiece so that when applying the next layer the foam lies horizontally again.

If possible, apply foam evenly to the frame, taking into account the shape of the future craft. For getting good result useful to read the contents of the article

After the material has hardened, you can add foam to those places where it is missing in accordance with the outlines of the craft. Excessively protruding parts should be cut off with a sharp knife that will not tear the material. Smooth surfaces can be achieved with sandpaper wrapped around a block.

A layer of putty for external use will improve the protection of the craft from solar radiation and provide additional leveling. Now you can paint the craft.

Please note that paint can spoil the surface of insufficiently hardened foam!

It is recommended to use paints for external use and paint in two layers. Convenient to work with acrylic paints. For additional protection the figure is coated with varnish, preferably “yacht” varnish. Please note that varnish will give white paint a yellowish tint. The finished craft can be further decorated various elements decor: buttons, glass, cord and other products of rich imagination. Pay attention to the fungus, which is made of polyurethane foam,
Don't limit your imagination when decorating

Master class: making curly lamb together

The foam lamb seemed to me the most suitable for the first experience of working with the material:

the figurine is relatively uncomplicated, but not small in size;
the curls of the lamb look very much like frozen foam;
I can decorate what I made with my own hands with a new element and make lamb hooves from small brown plastic bottles.

The sequence of actions of the master class coincides with the sequence of the photo:

First of all, you need to make a frame. Five-liter and regular bottles worked well for the torso and neck.
To imitate hooves I used small bottles Brown. To prevent the lamb's legs from being too thick, I had to reduce the thickness of the brown bottles. To do this, their bodies were cut lengthwise several times and then wrapped with tape.
To attach the legs in a five-liter container, I cut out round holes, into which he inserted the necks of small bottles. I cut off the bottle for the neck and secured it with tape.
To make the structure heavier, the frame body was filled halfway with sand and the hole in the container was sealed with tape. To make the tail, I inserted a wooden stick into the slot in the bottle.
The foam was applied in several layers, with intermediate drying for half an hour. It took two 600 ml cylinders.
To prevent the foam from falling off, the workpiece was turned over several times.
The workpiece became strong and took on the shape of a lamb.
Stuck in to form ears and muzzle wooden sticks. They also had to be completed in several passes.
The result was a blank that just needed to be trimmed with a knife. IN selected places I had to add foam.
When cutting with a knife, I studied a large number of photos. I regretted that there was no living “photo model”. The work is painstaking, but interesting. Look what happened.
I first painted the entire figure with white paint. After it dried, I was happy to finish painting the other elements. Added eyes - you can admire the result.

Concluding the description, I would like to add that the process of making a garden figure for the dacha with my own hands turned out to be very exciting. I wish you the same result! Perhaps a video will help your work.