How to sharpen scissors at home. How to properly sharpen scissors at home: quick and affordable ways

Over time, any scissors become dull and cut materials much worse. Don't rush to throw them away. Save on your purchase: restore the sharpness of the blades; fortunately, there are several simple and accessible ways to do this at home.

How and what to sharpen

The easiest way to revive office scissors and a hair clipper. With nail scissors the situation is more complicated: you will need a small block with a fine abrasive.

Advice
If scissors with curved ends become dull, it is better to buy new ones or contact a professional, as it will be difficult to sharpen them yourself.

Available sharpening methods:

• grindstone- sold in hardware and construction stores;
• foil;
• sandpaper;
• file.

Even though the blades are dull, they can still cut your hands. Therefore, it is highly advisable to work with protective fabric gloves and with care.

Special sharpener

A sharpening stone (a block, less often a circle) has two sides: low- and coarse-abrasive. We need to start with the last one.

How to operate the sharpener:

1. The stone is placed on a piece of cloth (to avoid slipping and damage to the surface) and lightly moistened with water.
2. The scissors are opened as wide as possible or disassembled - if the design allows.
3. Extreme care or experience is required when working with a whetstone. The most important thing when sharpening is to maintain the height of the blade angle. The factory tilt cannot be changed.
4. The blade is sharpened with movements in one direction (away from you). It is important that it goes completely across the stone, otherwise the scissors will cut the materials unevenly.
5. After sharpening on the rough side of the stone, the procedure is repeated on the fine-grained part.

Manicure scissors are sharpened according to the same rules, but on a special small sharpening stone. The best sharpening items are coated with diamond chips.

Advice
To check the sharpness of a sharpened object, cut a piece of it synthetic fabric. This kind of material is quite difficult to cut. If it works the first time, the device is sharpened.

Foil method

This way you can quickly sharpen your manicure scissors.

How to properly sharpen scissors with foil:

1. A sheet of ordinary foil is folded in several layers - this way the effect will be noticeable faster.
2. The folded sheet is cut into several strips. The more there are, the sharper the object will become.
3. Remains of foil are removed from the blades with a dry cloth.

This method is an excellent preventive measure for scissors: as soon as they start to work worse, the blades are corrected by cutting the foil. This way you can also relieve stress.

Sandpaper

This quick way, the result is not the same as when using a sharpening stone, but the device will become noticeably sharper. The optimal abrasive is 150-200. With a finely abrasive sandpaper the process will take much longer. After working with the sanding sheet, wipe the blades with a napkin.

Three ways to sharpen scissors using sandpaper:

1. The sheet is placed on a flat surface. The scissors are opened or disassembled and the blades are moved in different directions, applying force. To prevent the sandpaper from slipping, it is secured at the edges with tape or something heavy.
2. The second way to sharpen an object is to move the paper itself along the blades.
3. If you don't mind, cut the coarse sandpaper with dull scissors. The optimal number of cuts is 20-25. The cutting process will make the blades a little sharper.

Advice
Treat only the outer surface. If you sharpen the inside, the scissors will be damaged.

How to use a file

Sharpening scissors with a file takes longer than using other methods. To bring the blades into working condition This method will take about an hour of continuous effort.

The device is fixed on a flat surface or held with one hand. The blades are alternately drawn along the file from the attachment point to the very tip.

You need a fine-grained file. As with the whetstone, you will need confidence and experienced hand. Sharpening is carried out at an angle made at the factory, and it cannot be changed during the process - otherwise the device will be finished.

Sharpening scissors correctly is half the battle. The item must be used correctly: cut only what it is intended for, wash off dirt, wipe dry and store folded. Preventive home sharpening is carried out once every 2-3 months with regular use of the device. If scissors lie idle for a long time, they are sharpened once a year.

Often the reason bad work the device is not due to dull blades, but to a weakened fastening. Just tighten the bolt and the item will work like new. Another common reason is adhered dirt, glue from stationery tape and so on. You need to wash the blades with soap and a stiff brush, then wipe dry. Stubborn plaque is removed with soda, vinegar or alcohol.

Home sharpening allows you to quickly correct scissors, but an ideal result is obtained only with the work of a master and the use of special equipment. In addition, when misuse using home methods can easily ruin a tool. Therefore, it is better to carry out only preventive sharpening yourself, and in case of severe dullness, contact professionals.

With prolonged use, any sharp objects gradually become dull and begin to cut worse. High-quality and professional scissors for hair cutting, sewing and manicure are quite expensive. Therefore, it is cheaper and more practical to sharpen products than to buy new ones.

It is recommended to sharpen professional scissors every six months, universal scissors - once a year. Suitable solution will turn to a professional. But if you don’t want to give the tool to a master for sharpening, you can perform the procedure yourself. Let's look at how to sharpen scissors at home.

A universal way to sharpen scissors

A universal method is the use of a special sharpening stone or, as it is called, a whetstone. This method is available to everyone. To start sharpening, place the tool on a towel or cloth and wipe the surface with oil (machine or special for scissors) or plain water.

After processing, unscrew the main screw using flat screwdriver and disassemble the product into individual blades. Disassembly will make sharpening easy and quick. For preventative treatment When the blades are only slightly dull, use the fine-grit side of the whetstone.

If the blades are very dull, first treat the surface with the coarse-grained or coarse side of the whetstone, and then with the fine-grained side. First, sharpen the inside until the blade becomes sharp. Use movements in one direction only, moving from the spout to the handles. Don't sharpen your blades back and forth! When processing, keep the sharpening angle within 65-70 degrees.

After internal sides sharpen the outer one and remove small burrs using sandpaper. After the procedure, reassemble the instrument and check the result of the work. Clean the item with a tissue.

Five ways to quickly sharpen scissors

1. Take aluminum foil and fold it lengthwise into six layers. Then start cutting the resulting thick foil strip with scissors until the blades become sharp. Cut along the entire length of the blade from base to tip. Once finished, wipe the item with a damp paper towel and wipe dry. This method is not suitable for manicure tools;
2. By analogy with foil, you can use sandpaper. It is best to take the material from tissue based with a grain index over 150. Fold the sheet so that the rough side is on the outside. Start cutting the sandpaper in the same way as foil until you get the desired result. After processing, wipe the blades with a dry cloth. This method is also not suitable for small nail scissors with curved blades;
3. Take a metal kitchen scrub sponge and use it the same way you would use foil or sandpaper. Cut the sponge using scissors, but be careful as it leaves a lot of debris. Therefore, it is better to perform the procedure over a previously spread newspaper or trash can. Wipe the treated blades with a damp cloth and wipe dry;
4. Use a glass jar that you don't need. Clamp the product between the blades of the tool and start cutting until the blade becomes sharp and smooth. Position the can so that it is as close as possible to where the blades are held together. Wipe the sharpened object with a damp and then dry cloth;
5. You will need a sewing pin or gypsy needle. IN in this case the needle or pin is clamped between the blades of the scissors, as in the glass jar method. Start cutting and continue until the blades become sharp. Then wipe the surface with wet and dry wipes.

How to sharpen nail scissors and tweezers

It is more difficult to sharpen nail clippers and scissors than universal and stationery scissors, cutting or sewing scissors. This is due to uneven blades of manicure devices. If sharpened incorrectly, it is very easy to ruin such products. In a suitable way in this case, the use of a diamond rod in the form of a cone will be used.

Before sharpening nail scissors, it is better to disassemble a small device. This will make the job easier. Then, with smooth and careful movements, move the diamond rod in one direction only! Carefully remove the metal from the surface until you reduce the shiny stripes to 0.2-0.3 mm. Such stripes appear where the blades rub against each other.

Work each blade in turn, moving the diamond rod in one direction only. Then assemble the scissors and snap into place with light force. Lightly sand the cutting edges again. For nail scissors, use a sharpening angle between 45-69 degrees.

For tweezers, take a small, narrow diamond stone and sharpen the blades from the inside until the cutting edges are straight. After internal processing, the blades of the tweezers are slightly sharpened on the outside to correct the tips. At the end of the procedure, the blades must be polished with leather material or a special polishing paste.

What not to do

Scissors and other manicure devices cannot be sharpened using folded foil or sandpaper. This method gives the feeling of the sharpness of the blades only for a short time. However, due to this procedure, the products deteriorate greatly, the sharpening angle changes, as a result of which even an experienced craftsman cannot restore the devices.

To sharpen manicure instruments, you should also not use a standard grain stone or sharpening stones. They leave rough marks on cutting surfaces. To make such products last longer, it is important to organize proper care. Let's look at how to properly care for different types of scissors.

How to care for scissors

For long-term use, clean products after each use with wet wipes and be sure to wipe dry. Regularly lubricate the rubbing elements with oil, but avoid treating the blades.

Use manicure tools only for its intended purpose and store in a special case in a horizontal position. Items can only be stored in a clean and dry state.

Try not to drop the product, do not expose the item to temperatures and mechanical pressure. Treat products with special or regular machine oil to prevent rust and premature aging. But remember that the blades cannot be lubricated with oil!

Manicure, kitchen, stationery scissors - you can’t do without them either in everyday life or in professional field. If the tools become dull during use, there is no need to rush to get rid of them. Knowing how to sharpen scissors, it is easy to return them to functionality. For sharpening, you can use special professional tools or use the “grandmother’s method.”

Professional sharpening of scissors

For self-sharpening Only those scissors that are used in everyday life are recommended. It is better to entrust the sharpening of manicure tongs, thinning scissors, and tailor's scissors to a professional craftsman. They use a special electrical device that has attachments for a specific type of scissors or forceps. You'll have to spend money, to pay for the work of the master, but professional tools are expensive, so mistakes should not be made when sharpening. If scissors are used only for household purposes, then you can get by in simple ways sharpening, used by many housewives in everyday life. At home, you can sharpen scissors with your own hands if you have 3 devices:

If scissors are often used in everyday life, then it is better to purchase a special device that will adjust their sharpness. In the shop household goods You can purchase a special universal sharpener for knives and scissors; it will be a “godsend” for many housewives.

Rules for working at home

No matter, what tool is used, you need to know how to sharpen metal scissors at home correctly in order to get good result. It is important to know 4 rules:

If the design of the scissors allows, then it is better to disassemble them to simplify your task, how to sharpen manicure tweezers at home. The blades are sharpened separately, so it is more comfortable to work, and the result is better.

Handy tools for sharpening

If scissors need to be sharpened quickly, but there are no available tools at home, then tools that can be found in any home will do. With their help, you can cope with the task in a few minutes. But the results of the work will be short-lived. If the tool is expensive, then it is better not to use dubious sharpening methods, so as not to damage the tweezers. It is better not to sharpen professional products using home methods, because this can damage the instrument. Sharpening methods:

If you need very sharp tools, then you can use one trick: a sheet of foil needs to be folded in such a way as to form a thick strip. Then the effect of sharpening will be maximum.

Metal sponge and needle

Every housewife has a metal sponge in everyday life; it will become an excellent assistant when you need to quickly sharpen scissors or nail clippers. When sharpening, small particles scatter from the sponge in different directions, there will be a lot of them and they are small, so it is difficult to collect them after work. It is better to sharpen products over a trash can so as not to sweep them later. How to sharpen: you need to prepare a metal sponge in advance; it is better to choose the one that is softer. The sponge is cut across the entire surface, and the entire blade must be used. The more cuts you make, the sharper the tool becomes.

In addition to a metal sponge, you can use a gypsy needle to sharpen nail clippers or scissors. It is suitable for processing small instruments. How to proceed:

1. You need to make a cut along the needle, closing the blades, drawing out the cutting edges along the object.
2. When working, minimal effort is applied, all movements should be light and gliding.
3. The cuts are made until the product becomes sharp.

Instead of a needle, you can use a knitting needle, screwdriver or pin. The main thing is not to lose the essence of the method - the work should be done on the metal using the entire cutting surface of the scissors.

Application of glass jar

The peculiarity of the method is the use of an unnecessary can, because there will be scratches and chips on it. If you need to sharpen a small tool, use a bottle with a narrow neck. How to sharpen:

1. Movements are made as if the can is being “cut,” the blade slides along it, and the bottle moves back.
2. Movements are performed until the result is satisfactory.
3. After use, the blades are wiped down so that there is no glass dust on them.

All traditional methods give a short-term result, in order for the product to remain sharp for a long time, you need to seek help from a professional craftsman.

If the blades are not to blame

Tools do not always cut well because of dull blades. Before you take your product to be sharpened, you should make sure whether it is needed in everyday life. You need to inspect the fastening; if it is weak, then the scissors do not cut, but simply “chew.” In this case, it will solve the problem Easy - just tighten the fastener. It is easier to solve the problem of a weak connection if a bolt is used. The scissors are opened, the fastening is tightened using a screwdriver or other objects.

If the manufacturer uses a rivet as a fastening, then you will have to suffer longer. To tighten the fastening, the plug is “flattened” with a hammer. Then the cutting product is placed on a flat and hard surface, and you can start working. The object must be tightened only when it is open, otherwise it may not fit together after closing. If after these manipulations there is a gap between the ends, you can file the stop. It is located between the rings. To solve the problem, sometimes it is enough to lubricate the product with a spindle - a special lubricant designed for sewing machines. There is no need to pour too much product, one drop is enough.

What is prohibited for scissors

Stationery or gardening Tools may not be used for a very long time, but manicure accessories are usually used every day . To extend the life of your favorite tools, you need to adhere to the following tips:

It is better to take professional products to a master, because not everything can be sharpened at home. For example, thinning scissors cannot be sharpened to the required sharpness in living conditions. Buy new tool instead of the old one - this is an extreme measure, you need to resort to it if it cannot be sharpened. If you turn to to an experienced master, then it will help align the blades and sharpen the tool better than at the factory.

Tool sharpening is possible at home, but it’s easier to prevent dullness than to fight it later on our own. In order for the sharpness of the product to be preserved for a long time, the item must be used strictly for its intended purpose. If the tweezers are intended for manicure, then they are strictly prohibited from cutting fabric or cardboard. Those who are interested in sewing should purchase several models of tools - for a specific task. When making clothes, you often have to cut threads from metal, zippers, and if you do this with cutting tongs, they will quickly become dull.

Attention, TODAY only!

07/30/2018 1,555 views

Sooner or later, the scissors become dull and begin to cut worse. Usually people prefer to buy new ones, because their cost is not very high. But some are interested in the question of how to properly sharpen scissors at home? It's quite simple and doesn't take much time. For this purpose, things that can be found in each apartment are used.

You can sharpen any scissors: manicure scissors, construction scissors, office scissors. Depending on the type, the methods of adding spice differ. Use sandpaper, a gypsy needle, and special sharpeners. It is important to be careful when working and carefully study the algorithm of actions. It is better to give preference simple solutions this problem.

How to prepare material for sharpening?

The easiest ways to return sharpness are to hairdressing scissors and stationery scissors. The manicure option is much more difficult to put in order. Before you start sharpening, it is important to make sure that the reason is really that the tool is dull.

Sometimes the fastening axis is weakened where a regular rivet or bolt is used. In this case, they should be tightened. If after this the scissors do not cut well enough, you should sharpen the stop heel. It is located near the hole with the bolt. There is no need to try to close the blades, as this will only increase the problem.

If a rivet is used in the connection area, it should be tightened. First, the scissors should be opened and placed on any metal product.

Then, using a beard, flatten the rivet and check the closure of the blades. If the situation has not changed and the tool still does not cut, it needs to be sharpened.

What is the best thing not to do in the process?

Nail scissors must not be sharpened with foil or sandpaper. The method will give the tool sharpness for a short time, but it will deteriorate and the sharpening angle will change. Even an experienced specialist cannot repair the product.

Also for a manicure set not regular will do grit stone or whetstone. There will be marks on the coating. It is important to understand that individual methods are suitable for each type of scissors.

How to sharpen scissors with your own hands?

You will be able to sharpen the tool yourself if you have the following equipment at home:

1. Diamond circle. It is chosen for any scissors, but it is especially effective for large products. For example, a tool for shearing sheep or gardening. For a manicure device, you should use a rounded stone or a diamond file.
2. Sharpening stone. The main difficulty lies in the selection of grain size. If you need to sharpen very sharply, the fine-grained part is used, in other cases the coarse-grained part is used. Hairdressing products are sharpened with a coarse-grained bar, otherwise they will be very sharp, but it will not be possible to cut curls normally. The hair will begin to slip from the blade.
3. File. It allows you to cope with difficult tasks. For example, with metal cutting products that have teeth. The main difficulty is choosing the size.

When using kitchen scissors privately, it is worth purchasing a special device to change their sharpness. You can buy a device that is both a knife and a sharpener for scissors; it will be indispensable in the household.

If there are no devices, it is worth using improvised means. Sharpening will be quick and easy. It is important to understand that the result will not be durable.

The sandpaper method is effective if the scissors are not very dull. You need to proceed as follows:

• Place the sandpaper with the abrasive part.
• Cut the paper into long strips so that the action passes over the entire area of ​​the blade. There should be about twenty movements.
• Wipe the blades to remove any crumbs.
• Do a check.

The method is suitable for zigzag scissors. It is difficult to sharpen such products using a bar due to the specific edge.

Foil is used from improvised means. For maximum spiciness, slice a large number of thin stripes. If you need a light point, you can make 2-3 wide lines.

Sharpen as follows:

• Prepare a sheet of 25 cm. Fold it lengthwise several times to form a dense strip.
• Cut the foil along the lines.
• It is important that the blade is fully involved in the process.

When you use a metal sponge, it leaves residue flying. There are a lot of them, so cleaning can be difficult. It is better for the process to take place over a bucket. Algorithm of actions:

• Prepare a kitchen sponge. If possible, you should give preference to a softer option.
• Cut it with the whole blade. The sharpness of the scissors depends on the number of cuts.

The gypsy needle is suitable for small tools, for example, for cuticles. You can use it to sharpen nail clippers.

To use this method you will need:

1. Cutting a needle. Close the scissors and try to guide the needle along the blades.
2. There is no need to put in a lot of effort; it is better to carry out the procedure with light movements.
3. Continue the process until you get the result.

The needle can be replaced with a screwdriver, sewing pin, or knitting needle. It is important to cut metal.

Using glass jar need to choose unnecessary option, as there will be scratches on it. For small scissors, use a bottle with a narrow neck.

Algorithm of actions:

• Cut the can. It should move backwards and the blade should slide.
• The actions are repeated until the effect is noticeable.
• Wipe the blades as there will be some invisible dust on them.

It is important to understand that folk methods are designed for immediate results. To keep the tool sharp, you will need to constantly return to them. Therefore, it is worth using professional methods whenever possible.

1. Pay attention to the factory sharpening angle. The procedure must take place at the angle specified by the manufacturer. Otherwise, the device will be hopelessly damaged.
2. Sharpen "at yourself." It is important to monitor your own movements and not act “back and forth.” Scissors are sharpened from the end to the rings.
3. Remove burrs. They are removed with fine-grained abrasive. It should not be used for hairdressing scissors, as it acquires unnecessary sharpness.
4. Check the work. Cut surfaces for which a specific type of tool is created. To test the tailor's scissors, you need to cut the material. A thin flap is taken, hung, and cut. If the cuts are smooth, then the scissors are sharpened.

If possible, disassemble the tool by removing the securing bolt. Sharpening blades separately is more convenient and efficient.

Manicure

Experienced manicure specialists give scissors to professionals for sharpening. The rough method using large abrasive particles will damage cuticle nippers and tools. Therefore, it is better not to sharpen an expensive device yourself. Sharpening is often done using a laser.

Algorithm of actions:

1. Prepare a diamond file.
2. Lightly move the file towards the ends.
3. Make sure that the sharpening angle does not change.

Standard methods can be used, but must be done very carefully. Nail scissors with curved blades are easier to buy than to sharpen. But you are allowed to adjust the bolt if it helps.

For haircut

It is better not to sharpen it yourself, otherwise the tool will be damaged. To create these products, hard and durable steel is used. It is hardened, so you can do without sharpening for a long time. When it is required, special equipment is used - a machine with a laser sight that has replaceable disks.

Products for thinning are more difficult to put in order than others. They are non-standard, multi-blade. There are two blades - one is straight, the other is serrated. The sharpening angle of the teeth is 70 degrees. At the top of the corner there are grooves that hold the curls. Therefore, a special device is required. You need to contact a professional to use a sharpener with an angle adjustment.

Sheep shearing shears are unusual. They are sharp to cut fur precisely. A needle and sandpaper will not help here. You need to use wheels with small abrasive particles.

Algorithm of actions:

• Open the tool and place them on the circle.
• Turn on grinder, sharpen to maximum results.
• Repeat the procedure for the other blade.

For metal cutting

In this case, such popular methods as sharpening with a needle, sandpaper or file are suitable.

Garden

Experts advise treating garden tools at the end of the season. These are not only scissors, but also pruners. Can be used sharpening machine in the presence of. If it is not available, you should use standard bars sold in gardening departments.

Algorithm of actions:

• Remove dried dirt and rust from the tool.
• Place the blade against the block and begin sharpening.
• Repeat the procedure with another blade.

Video: how to properly sharpen scissors at home?

To keep scissors sharp for a long time, you must follow these rules:

1. If the tool is used for cutting material, it should only be used for this task. Do not cut meat, paper or other objects with it.
2. Threads of metal and lightning are cut by other devices.
3. Kitchen, manicure or flower scissors must undergo mandatory disinfection.

You cannot boil the instrument; you should use a regular antiseptic for processing. Otherwise, they will deteriorate - they will stop cutting, and rust will form. They should be lubricated every six months.

The sharpening procedure is quite simple, but it is better to avoid losing the sharpness of the scissors. Moreover, with the help traditional methods it will not be possible to maintain the result for a long time. The main thing that can be done for this is to use the tool for its intended purpose.

Best Practices for sharpening manicure and other types of scissors with your own hands

5 (100%) 1 votes

Price special tool for cutting - high. To extend the service life, sharpening of scissors is necessary. An operation performed independently often results in damage to the instrument: the blades are damaged and the scissors have to be thrown away. “Jewelry” work, which gives incredible sharpness to a working tool, should only be performed by a professional.

photo and after sharpening the scissors

Professional sharpening of scissors

On cutting edge scissors, with regular use, stains appear. The technician will quickly put them in order if their size is no more than 1 mm. Significant wear of the tool is indicated by the fact that the size of the spots has become about 2 mm. In this case, it will be more difficult to sharpen it.

Important: a good professional instrument requires professional care.

How does the sharpening process work?

Repairing and sharpening professional scissors is difficult technological process. It is carried out in stages. Work period cutting tool, and its quality depends on the correctness of each of them:

1. Disassembling the tool.
2. Cleaning nodes.
3. Sharpening cutting blades.
4. The scissors are polished in assembled form.
5. All components are lubricated.

Tool sharpening methods

The main parameter that determines the functionality of the scissors is the blade profile. You need to know what type of section it has in order to sharpen it correctly. Based on this we choose various ways sharpening.

• Sharpening on a horizontal faceplate. This method Well suited for sharpening hairdressing scissors.
• Sharpening on high-speed sharpening machines. This equipment is good for sharpening manicure and pedicure instruments.
• Sharpening on low-speed water-cooled machines. Using such equipment, it is best to sharpen both tailor’s scissors and household or office scissors.

Sharpening forms

• Convex sharpening: the shape of the outer surface is convex, has no boundaries (clear) transitions to the blade.
• Semi-convex - the front surface of the blade has a convex shape. The transition border to the casing is noticeable; after polishing it may have a minimal rounding.
• Classic - flat or concave front surface of the blade. It shows a clear (not rounded) border of the transition to the clypeus. The shape of the clypeus is semi-convex or flat.

Sharpening hairdressing scissors

Hairdressing scissors are designed for different purposes and can be sharpened in different ways. There are 3 types of sharpening:

• For straight cuts - straight scissors.
• For a sliding oblique cut (slicing). Very fine sharpening. The blade is honed to a razor sharpness. The hair is cut by running open scissors through it.
• Sharpening thinning scissors. In such a tool, the blades are sharpened on both sides.

We also sharpen hot scissors.

By using special device(protractor) determines the sharpening angle of the scissors. Using a stone (Japanese water) with a grain of 6000 grit, the edge of the hairdressing scissors is brought to a mirror shine.

Sharpening nail scissors

These scissors require professional sharpening. More often than hairdressers. They have a gap (play) between the blades. In order for the cutting surfaces to converge correctly, craftsmen, first of all, remove the backlash. Then the scissors are given the correct shape and then sharpened.

Comparison of scissor sharpening techniques

There are 3 methods for processing cutting inserts:

Sharpening on a horizontal faceplate	Sharpening on high-speed sharpening machines	Sharpening on low-speed water-cooled machines
The amount of metal removed is minimal (from several microns to several tenths of mm). Processing speed is not high. Overheating of the metal is possible only at maximum speed. The quick change of abrasive materials makes work easier.	The amount of removal depends on the selected abrasive or diamond tools and pressure forces on the workpiece. The likelihood of overheating in inept hands is quite high.	The amount of removal depends on the choice of grit abrasive wheel. Overheating is completely excluded. Manufacturers of machines of this type most often include equipment and sharpening devices, which significantly increases quality and productivity.

Important: if the tools are heavily worn, only manual sharpening will help.

Features of our company

Our workshop provides high-quality tool sharpening at an affordable price. The equipment for work is modern. After the work of our masters, you will not find the difference between a new and sharpened instrument.

By collaborating with the company, you receive:

• Guarantee.
• Fast order fulfillment.
• The quality of tool sharpening is high.
• Convenient payment (non-cash or cash).
• For regular customers there is a flexible system of discounts.
• Possibility of delivering tools to your address.
• Low prices for services.

Our employees can remove play in the scissors, sharpen the tool, remove rust, eliminate irregularities, chips and make the tools as good as new.

Cost of sharpening in a workshop

Hairdressing straight scissors

Hairdressing thinning scissors

* sharpening of a “left-handed” tool +200 R to the cost.

Hot scissors

Miscellaneous

Delivery of finished tools in Moscow

For your convenience, delivery of tools is possible. Delivery options are discussed individually over the phone.

Workshop contacts

We will be glad to see you in our workshop at the address: Moscow, South-Western Administrative District, st. Krzhizhanovskogo, building 3. Nearest metro stations: Profsoyuznaya, Akademicheskaya and Universitet. Sharpening professional tools for manicure: Monday-Friday – from 10.00 to 19.00; Saturday – from 11.00 to 17.00; Sunday is a day off. Additional information You can find out more about sharpening, work time and cost by calling 8 968 375-57-88.

If you want to sharpen scissors at home, we recommend that you do not do this, but watch a video about how this is done professional craftsmen in a workshop environment and contact them

Return