How to open a plastic door from the outside on the balcony. What to do and how to open it if the plastic door is jammed

Installation metal-plastic doors And window systems to the balcony - a frequently practiced scheme. It is convenient, has a reasonable cost and is durable, both in operation and in appearance. After a certain period of time, the door opening mechanisms begin to work worse. This period depends on careful use, the manufacturer of the mechanism, correct initial installation, and even on temperature parameters. If the balcony door begins to open or close poorly, this does not mean that it is time to change the entire unit - just adjust the mechanism. How to adjust plastic door on the balcony? It is enough to know a few basic points.

When is it necessary to adjust the door?

You should think about adjusting the balcony door only when problems in the operation of the sash become noticeable - discomfort when using the door.

Remember when new windows and doors were just installed on the balcony. The handle turned easily and to the strictly required position, the door did not “get confused” - to open completely or to be set for ventilation. All movements of the sash were smooth and easy.

If any problems arise with the operation of the balcony door, even in the form of more rigid opening or closing, adjustment of the mechanism is necessary.

Common problems and why they occur

Plastic balcony doors have been widely used as balcony doors for several years now. During this period, companies performing technical and warranty service window and door mechanisms, we were able to easily compile a list of the most frequently encountered problems requiring adjustment of the balcony door.

Sagging under its own weight - the door leaf begins to catch on the threshold. At first almost imperceptibly, over time it becomes more and more obvious.

The sagging of the balcony door is caused by the natural mechanism of sagging hinges. The weight of such a sash is quite considerable and over the years the hinges get tired of holding it. The rate at which this problem occurs depends on the manufacturer and material of the hinges, as well as on the number of chambers and the thickness of the glass.

If you live in a climate with sudden changes in temperature and humidity, and your balcony is not reinforced with additional thermal insulation materials, get ready for the door to start jamming in the middle. This is how the door leaf moves to the side, towards the frame.

In 90% of cases it occurs as a reaction to climatic conditions - temperature changes, high humidity followed by drought.

Next common problem – the balcony door no longer fits tightly to the frame when closed. This problem not only causes inconvenience during use, but is also dangerous to the health of apartment residents. Unplanned in the dead of winter is a very unpleasant occurrence.

The cause of this problem is age - the period of use of the mechanism. Over time, the parts responsible for pressing the door leaf to the frame weaken and need to be adjusted.

Poor quality materials and rough handling will cause the door handle to become loose or even fall off. This problem is also not difficult to fix.

Other possible malfunctions in mechanisms occur much less frequently; some require the intervention of specialists.

Instructions for adjusting plastic doors

You can fix the problems described above yourself with some knowledge and general idea about the operation of the door mechanism. Correcting such problems will not take much time - simple adjustment rarely takes more than 30 minutes. By observing due care, it is impossible to irreversibly damage something when adjusting the mechanism.

Sagging

To eliminate sagging balcony sash, the task becomes raising the sash to a certain height.

• To do this, remove the decorative and protective plug from the bottom hinge.
• At the top of the loop there is a vertical hole into which you need to insert a hexagon ( standard size – 6 mm).
• Make circular rotations with the hexagon clockwise until the door is in place.
• Carry out a control check of the opening of the sash after each circle - rarely more is required 5 turns.
• If problems arise or the hexagon does not rotate, you need to slightly adjust the upper hinge in the same way.
• Make sure that the sash does not catch the threshold, but also does not rise too high - otherwise the tightness in the closed position will be broken.

Video

Sticking in the middle

When the sash sags, we resort to vertical adjustment, and when it jams in the middle due to climatic conditions, we resort to horizontal adjustment.

1. Open the sash wide.
2. There is a hole at the end, near the inside of the hinges.
3. If the mechanism elements are closed with plugs, remove them.
4. Insert a hexagon into the hole near the bottom hinge.
5. Start clockwise rotation similar to vertical adjustment.
6. This will pull the door towards the hinge.
7. Check after each rotation.
8. If the problem persists and the sash still jams, do the same with the top hinge.
9. Once successful, return the plugs to their place.

Loose fit

There are locking mechanisms at the end of the balcony sash. They will help relieve apartment residents from unwanted drafts and keep the house warm.

Majority plastic doors have 4 locking mechanisms each. They have two types of eccentrics.

To change the fit of the door, it is necessary to act on these eccentrics. Diagonal position for standard and central for i.s. indicate an average degree of sash pressure.

A shift towards the vertical or to the right weakens the degree of pressing of the sash against the frame, a shift towards the horizontal or to the left strengthens it.

For the cold season it is better to install stronger fit of the sash.

Now you know how to fix common problems associated with door mechanisms. There is nothing complicated about this, but the presence of a hexagon will help. If it is missing, you can try using a screwdriver.

If you are afraid of penetration into the mechanism of the balcony sash, invite a specialist who will not only make a competent adjustment necessary elements, and will also teach you how to adjust the position of the sash yourself in the future.

This problem is one of the most common and causes significant discomfort.

Fixing a loose handle is quick. The only tool you will need is a Phillips screwdriver.

Between the handle and the sash panel there is a vertical plastic cap - a plug. It needs to be turned to a horizontal position; you will see two screws. Turn the screwdriver clockwise to tighten the screws.

They should be twisted tightly, but without excess.

Check - the handle should start working normally, without dangling. Return the plug to its original position.

If the malfunction does not disappear, there is a high probability that an almost imperceptible crack has appeared in the plastic of the handle. This is a reason to purchase a new handle for the balcony door.

If the door handle does not hang loose, but is stiff or unclear, try lubricating the door mechanisms with WD type lubricant.

When conducting correct adjustment, the door to the balcony will last for many years.

Metal-plastic windows and doors are a definite advantage modern century. We get so used to their functionality and comfort that the unpleasant situations that sometimes happen to them often take us by surprise. What to do when the plastic door is jammed and there is no way to open it?

The very first and most important advice that any master will give you is not to panic, even if the situation turns out to be serious, with a calm head it is easier to decide what to do. First you need to follow certain rules:

• Do not break. Do not attempt to use force unless there is an emergency reason. Using force can break fragile plastic parts and cause financial damage to yourself. Often the cause of the breakdown can be eliminated with one or two easy movements if you know how your plastic door works.
• Do not pick with sharp objects. There is no need to pick locks or trim without understanding why the door to the balcony is jammed. You risk ruining its appearance in this way.
• Do not try to break the glass. It is quite difficult to break a high-quality double-glazed window and is risky for your health: firstly, you can get hurt, and secondly, if the weather is cold outside, you can catch a cold. If there is a need for this, the double-glazed window can be carefully dismantled.

There can be at least three reasons for jamming:

• when changing the position from “open” to “ventilation”;
• if the handle or lock breaks;
• when the door to the balcony is skewed or deformed.

Let's consider what to do in each case separately.

The door jammed when changing positions

The plastic door to the balcony often jams when you try to move it with a sharp movement from the “ventilation” state to the “open” state, and vice versa. The handle is blocked and the structure itself freezes, relying on only one point, as a rule, this bottom corner, and is difficult to open or close.

IN in this case, you need to decide what brand of fittings. The brand name can be found on the lock plate. As shown in the photo.

For products with hardware brands “Winkhaus”, “GU”, “Roto”, at the end, just below the handle, you need to find a metal tongue with your finger. It needs to be returned to its original position so that it becomes vertical. At the same time, with your other hand, set the handle horizontally to the “open” position and press the door. Then turn the handle down and carefully close it.

If you have AUBI fittings installed, then instead of a tongue at the end there appears to be a metal plate with a spring. In this case, you need to vertically align the door, press the plate against the seal and close the door, while turning the handle down. You can see how this is done in the video.

Plastic door handle jammed

It often happens that the plastic door to the balcony is jammed due to the fact that the handle does not work. This can happen if the handle mechanism needs lubrication or is broken. In the first case, it is enough to treat the handle and lock parts with lubricant. For a plastic structure, any one you pick up at an automotive chemical store will do.

The plastic handle for the balcony door breaks quite often, especially in public areas. They are quite fragile in themselves, and this often does not depend on the price of the structure. Sometimes a little more force is enough and the handle will break off or the entire locking mechanism will break. If the door to the balcony is jammed due to a broken handle, then the best solution would be to replace it. New pen It is not difficult to purchase in any specialized store or market.

In order to remove the old handle, you need, if possible, to set it to the “open” position. Next, pull the decorative plate at the base of the handle towards you from a vertical position to a horizontal one, as shown in the photo. Having done this, we will see underneath the screws that secure the handle to the window. After unscrewing the mounting screws with a suitable screwdriver, you need to carefully pull the handle towards you and remove it. The new handle must be inserted in place of the old one and secured with screws.

Jamming due to misalignment or deformation

The balcony door may also jam due to its misalignment or deformation. If you have observed poor functioning of the handle for some time, creaking, or deformation of the seal in some places, then this may be a misalignment door leaf. This sometimes happens with a balcony door due to its heavy weight and constant use.

It is quite easy to adjust the skew with your own hands. To do this, you first need to determine in which direction the skew is going. When the door is jammed and there is no way to open it, visually assess which direction it is skewed. If the door can be opened, at least a little, it is easier to identify the distortion. When closed, you need to outline the door with a pencil; when you open it, you can determine from the outline in which direction it has moved.

The front of the work when correcting the distortion will take place in the hinged hinges of the structure, so first you need to remove the plugs protecting them. If the door is skewed horizontally, then it is enough to lightly tighten the hinge screw, and then use a hex key to rotate the screw that is responsible for the horizontal plane to correct the door leaf.

When the door is skewed vertically, in order to correct it, you need to twist the screw with a hexagon, which is located at the bottom of the upper or lower door hinge. In order for a skewed door to lift, the screw must be turned counterclockwise, and vice versa if you need to lower it.

If all of the above steps did not help to eliminate the problem, then most likely we are talking about deformation. Deformation may occur due to temperature changes or damage. The reason may also not be high-quality installation or the materials from which the plastic door is made. It is quite difficult to correct the deformation on your own, so it is better to turn to specialists.

Prevention of breakdowns

To avoid a situation where plastic construction causes trouble, you need to learn how to behave correctly with her. Let's consider a few main points:

• You need to open and close doors with smooth, slow movements;
• Do not jerk the door handle sharply;
• periodically, at least twice a year, after wet seasons, you need to lubricate the moving parts of the doors;

Also, take the time to protect your balcony from sudden temperature changes.

Hide

About how to open plastic window, especially from the street side , Not only the thief may wonder: sometimes the same problem arises for the owners of the apartment. So, the front door may jam. This can happen for various reasons: for example, you reached landing, leaving the keys in the apartment, and the door slammed or locked from the inside Small child. Apartment owners often lose their keys front door, then the only way to get home is through the window. Also knowledge of how to open a plastic window , may be required if it is jammed.

In fact, products are rarely equipped additional protection from burglary, and they are easy to open with a screwdriver or any flat metal object, such as a ruler.

Opening plastic windows: methods and techniques

Let's say the window is closed, you're outside, and you only have a flathead screwdriver. First you need to find where the latch is. Will need to be squeezed gently window sash by pressing on the fittings. If you manage to do everything correctly, the sash will open slightly, you can stick your hand in and turn the handle, opening the window completely.

How to open a plastic window from the street using a ruler?

If you don’t have a screwdriver at hand, but you find a metal ruler, you can use the following scheme: place the ruler between the window frame and . Then you need to find the latch, try to hook it and pull it down. You need to act carefully so as not to damage the plastic of the window. This material is quite flexible and will allow you to squeeze the ruler where it is required without any problems. If you do everything correctly, the window will open.

However, it is worth considering that they have various designs, and you need to act in accordance with what design you have installed. The above methods illustrate how to open a plastic window with standard handles. If you have a different design in front of you, these methods may not work.

How to open a plastic window without a handle?

Opening such a structure from the street side on your own is extremely difficult. You can try to use any narrow object if the window is not locked. This method will help protect the structure from damage, and it will continue to function. If opened, it may be damaged. Almost always mechanical scratches remain on it, less often chips.

Another way to open a plastic window from the outside is by drilling. It will cause damage to the frame, as it will cause through hole, through which you can insert a narrow object, for example, a wire or a handle, and open the doors with its help.

How to open a double-glazed window , without harming it - an important issue for the window owner. Not everyone will want to change or repair after they need to break into the premises. These methods are the safest for the structure and allow you to maintain its functionality.

Features of outward opening windows

How to open from outside , if the sash opens in the same direction? This question is quite interesting, since before attempting to open such a window, you need to study its features.

Typically, such designs have double-sided locking handles, which allows them to open in the other direction. There may also be additional fittings that open the sash, for example, in ventilation mode. If there is such a function, it’s good: you can try using a ruler to switch the window to this position, push your hand inside and open it.

Quite often this method does not work with this type of window. You can try to pry them off with a crowbar or a chisel, but as a result the window will be broken and will require repairs, since the locking mechanism will be disabled.

How to open a window without a handle?

If you find yourself outside, you can try to open the glass unit using a screwdriver or ruler in the manner described above. But it happens that such a problem finds the owner indoors. There is no handle to the window, it is jammed, and it is impossible to open the sash. In this case, you will still need to purchase a handle or use pliers instead.

If you still can’t complete the action, you should look for the reason in an element called scissors. Sometimes it comes out of the grooves and prevents the window sash from moving in the right direction.

Before opening the double glazed window , you will need to find a tool to remove the sash from the frame. It is more convenient to remove the hinges located in the upper part of the structure. When they are unscrewed, you will see a metal trim; remove it, remove the hinge pin, lift the bottom hinge and find the scissor grooves. After the element is in place, the window should work.

Tip: before disassembling the window, try to get to the scissors from above. Sometimes the slopes do not prevent you from doing this.

How to open a plastic balcony door from the outside?

A more common problem is a closed balcony door. For example, you went out to smoke, but they locked you on the balcony and couldn’t hear you. There is a way out of the situation: if there is any tool on the balcony, you can try to open the door with a screwdriver. This is done according to the same principle as in the case of a plastic window.

Another way: unscrew, lift the door and open it from the other side. Or stick your hand into the hole formed and turn the handle to the desired position. But this may not always help, since many doors are equipped with additional protection. If you have just such a door, you will have to use the help of a specialist who repairs doors.

Conclusion. Opening a plastic window from the outside is not as easy as it might seem. Without knowledge of the design, having at least some tool at hand and a little experience, it may not be possible to open a window or plastic door without causing damage to the structure. If you don’t want to take risks, call a window repair specialist: he will help solve the problem.

Ways to open a window from the outside

Many people believe that PVC windows protect their homes from penetration more reliably than old Soviet windows. However, in reality, things are exactly the opposite.

The fact is that sashes made of plastic are much more flexible and soft than wooden ones, as a result of which they bend easily. In a normal situation, this is, of course, a reason for frustration, but not in ours, when you need to get into a locked house.

When deciding how to open a plastic window from the outside, it is worth noting that in order not to harm the object, it is important to use a special tool.

method No. 1

How can you open a plastic window from the street? Armed with a thin metal plate or an iron ruler, this element must be carefully placed between the frame and the glass unit.

Your next step is to get to the latch of the plastic window. Managed? Then we hook it with the tool and slowly pull it down.

There is absolutely no difficulty here because plastic is quite flexible material, which will not withstand metal pressure. The only disadvantage of this method is the possible appearance of minor scratches and even dents.

As a result of these actions, the cylinder of the locking mechanism should jump out of the hook;
if the constipations are located on several sections of the valves, which is most often the case, the procedure must be repeated by inserting a screwdriver in front of each of them. The moment the pin jumps out of the hook is accompanied by a loud click.

Hacking scheme for standard fittings

This method of opening is quite simple, and, most importantly, after such a hack, the fittings remain intact. The only thing is, if you do the work carelessly, you may scratch the plastic.

method number 2

How to open a plastic window from the outside with a screwdriver without damaging it. Determine where the latch is located. In that place, use this tool to try to press out the window sash.

A more complicated version is when there are several pins in the opening mechanism. In this case, you need to act step by step. Opposite each of the trunnions, you need to tear off the sash, pushing the trunnion behind the bar, and proceed to the next one only after the previous trunnion is fixed on the other side of the bar.

You can open it by pressing the fittings. Next, if everything was done correctly, the sash will open slightly. Next and final stage– turn the locking handle.

It should be noted that all these methods are effective only if the window is equipped with standard fittings. But if the attackers are professionals, they can also break windows with Roko and Mako anti-burglary fittings.

Anti-burglary hardware

method number 3

Is it possible to open a plastic window from the outside by drilling? It turns out that it is possible, but in most cases only burglars resort to this method. If in the previous methods the damage to the window is minor scratches, then in this case everything is on a larger scale.

So, by drilling a hole with a pen or the same screwdriver, a window is opened. Of course, this is how you will still get into the house, but your window design will be damaged.

In each modern apartment Plastic doors to the balcony have been installed. They are distinguished by many advantages: ease of use, low maintenance and speed of installation. Possible problem, which occurs after long-term operation of the mechanism - misalignment and loose fit of the sash. Therefore, it is useful to know how to adjust a plastic balcony door to eliminate loosening due to regular opening, closing and ventilation.

Before you begin diagnosing the problems that have arisen and subsequent repairs, it is worth understanding the structure. There is a base unit, as well as spare parts for a plastic balcony door. Moreover, among the accessories there are both irreplaceable and optional parts. As a rule, in door block includes the following elements:

• frame made of PVC profiles, which are connected by special fasteners;
• sash assembled in a similar way door frame principle;
• hinges, thanks to which the structure closes and opens;
• handle and latch for balcony doors PVC;
• a seal that ensures the tightness of the sash closure;
• double-glazed balcony door.

In addition, the device may include additional elements, expanding the functionality of the balcony door: stoppers, mechanical or hydraulic sensors and other parts.

The design of the handle may also differ: it can be stationary or movable, one-sided or two-sided; shell handles for balcony doors are popular. The latter option is in demand in families with children, as well as smoking people, because the shell handle allows you to conveniently close the door while on the balcony. For an apartment on the ground floor, a good idea is a handle with a lock - a balcony latch for plastic doors, which allows you to secure the balcony from intruders.

When adjustment of a plastic balcony door is required

The price of a plastic balcony door is quite high, but buying an expensive high-quality model does not save you from frequent cases of mechanism breakdowns. It's all about its frequent use, which leads to a decrease in the tightness of the sash.

In addition, double glazing provides excellent sound insulation, and PVC guarantees durability. However, it is these materials that noticeably make the structure heavier, as a result of which it begins to sag under its own weight and ceases to close tightly. As a result, a noticeable draft appears in the room, and insulating the balcony does not help.

The normal position of the plastic door is as follows:

• if the door is open, it does not move on its own;
• no sash displacement;
• the leaf is pressed tightly against the door frame profile.

If this is the case, intervention in the door mechanism is not required. However, if you notice the slightest deviation, you immediately need repairs to your plastic balcony doors. You shouldn’t delay calling a technician, because with each opening and closing the situation will get worse. As a result, this can lead to balcony doors not closing at all.

Helpful advice! If the door installation warranty has expired and you do not want to contact a specialist, you can watch the video self-adjustment plastic balcony doors and fix the problem yourself.

Types of balcony door faults

If you adjust a plastic balcony door with your own hands, for the success of the repair it is important to determine the causes of the malfunction. Most often the problems are as follows:

Type of malfunction	Cause of occurrence
Door sagging (when closing the door clings to the plastic threshold)	Most likely, the structure is too heavy, which leads to its displacement downwards
Hanging handle for balcony door	Usually the handle starts to dangle when the balcony door is opened very often
Plastic balcony doors do not close tightly (the leaf is not pressed tightly against the frame and you feel a draft)	As a rule, this is a symptom of a malfunctioning door handle or a misaligned door.
The door is shifted to the side (the door touches the middle of the frame)	Most often the problem is in the hinges; adjusting them will help eliminate the problem. This problem often occurs due to constant sudden temperature changes that affect the fittings for plastic balcony doors in case of insufficient insulation of the balcony

To test the door for tight closure, slam the shutter with a regular landscape sheet of paper. Try to push the sheet around the perimeter of the door. If it moves easily, the structure has lost its density and needs adjustment.

Also evaluate the tightness of the seal: uneven pressure on the rubber usually indicates sagging. Determining the direction of displacement is simple: pay attention to the place where the seal is compressed and check whether there is a mark from the sash on it.

How to determine if a door leaf is skewed

If you suspect the structure is skewed, close the sash and then move around the perimeter closed door with a simple pencil. Open the door and compare its outline with the drawn line. The presence of unevenness indicates that the door is warped. For accurate results, use a building level.

Let's say, as a result of measurements, you find out that the width of the drawn strip is 8 mm (an error of 1 mm is permissible). This means everything is in order and the door is not warped. If the width of one strip is 12 mm and the other is 4 mm, this clearly indicates that the door is skewed by 4 mm.

Note! Sometimes it turns out that on the hinge side the width of the strip is 3-4 mm, and on the handle side 6-7 mm. Such indicators indicate that the door is narrowed by 4-6 mm - this is a manufacturing defect, and there is no point in moving such a door.

Also check the width of the opening on all sides of the frame. The difference in measurements should not be more than 1 mm. Otherwise, the opening will have the shape of a barrel - this happens when installed incorrectly, when the middle of the frame is pulled towards the wall more than the top and bottom. Such errors also lead to loose clamping. By measuring the width of the sash on all sides, you will determine the correct length of the impost. The difference between the three measurements should not be more than 0.5-1 mm. If the indicators differ from the norm, the length of the impost differs from the required one and causes the door to skew.

How to adjust a plastic balcony door: step-by-step instructions

To avoid mistakes or accidental damage to the glass unit of a balcony door (the cost of which is quite high), you need to figure out how to adjust plastic balcony doors correctly. When carrying out work, it is not necessary to overpay for a specialist: you can adjust the balcony door yourself - video instructions can be easily found on the Internet.

To work you will need very few tools:

• hexagon;
• crosshead screwdriver;
• flat screwdriver.

Instructions and video: how to adjust plastic balcony doors when sagging

If you notice that when opening and closing the door it scratches the bottom edge of the frame, this indicates sagging of the door. The adjustment in this case can be vertical or horizontal.

Horizontal adjustment steps:

1. Open the door wide to the swing position.
2. There is a screw located near the top hinge at the end of the sash. Take the hex key and turn it clockwise 2-3 times.
3. Remove the plugs covering the holes leading to the top screws.
4. Turn all screws under the plugs clockwise.
5. After adjusting the mechanism, check whether the door now closes freely. If necessary, tighten the screws again.

To understand how to adjust balcony doors vertically, do the following:

1. Lift the door evenly and find the screw at the bottom end of the hinge, located along its axis.
2. If the screw is covered by a plug, carefully remove it.
3. If you twist the screw clockwise, carefully lift the door, if counterclockwise, lower it.

Adjusting the pressure of balcony doors and door handles

To tighten the handle for a plastic balcony door, you need to do the following:

1. Slowly and carefully turn the plastic cap at a right angle.
2. Under plastic cover find screws for fastening. Pull them up.

If the handle does not turn well, sometimes it is enough to lubricate the lock special material, which does not contain resin or acid. In the event of a complete breakdown, you should buy a handle for plastic balcony doors, unscrew the screws, remove old part and put a new one in its place.

Helpful advice! A good option is to install a magnetic latch on the balcony door. This will allow you to avoid too much impact on the door handle every time you close and open the door, which will have a beneficial effect on its durability.

If there is blowing from the plastic balcony doors, this is sure sign loose pressing of the sash. It is necessary to adjust the pressure of the plastic balcony door. To figure out how to adjust plastic balcony doors for pressure, look for locking elements on the door leaf. They are responsible for the pressure density.

Using a wrench or pliers, rotate the locking elements until the door is in the desired position. Professionals recommend periodically self-adjusting plastic balcony doors depending on the season. It’s enough to figure out how to adjust plastic balcony doors for the winter, and you can easily loosen the pressure in hot weather and compact during the cold season.

Sometimes adjusting the hinges does not help solve the problem, and then the leakage of the clamp can be eliminated using a pin. For this you will need. To achieve maximum door pressure, install the trunnion perpendicular to the profile. To, on the contrary, achieve minimal pressure, position the trunnion parallel.

Replacing the seal and adjusting the door when the frame is scratched

It may turn out that adjusting the door pressure did not bring the desired result. This happens because rubber compressor worn out, and any door adjustments are pointless without replacing it. To do this you need:

1. Pull out old tires. This is done without special effort And additional tools you won't need it.
2. Remove dirt from the inside of the groove.
3. Place a new seal. Make sure that the side bend is at the end of the sash.

Helpful advice! To make work easier, remove the sash from the frame: this will allow access to the rubber gaskets from the hinge side. It is better to choose a seal from the same manufacturer as the installed doors.

If the balcony doors do not close well and touch the frame, scratching its center, follow these instructions for self-adjusting plastic balcony doors:

1. Lower the sash to the bottom hinge.
2. Insert the adjusting key into the side screw and tighten the sash.
3. If the door position does not return to normal, repeat the procedure with the top hinge.

Finding yourself closed from the street when you have no idea how to open the plastic balcony door from the outside is unpleasant and even dangerous if the balcony is not insulated and the weather is not conducive to walking in home clothes. Owners of old-style plastic windows and doors that are not equipped with a handle for outside use are not insured against such incidents.

The absence of additional accessories is a feature of the most simple models windows and balconies PVC doors. What to do in such cases and what are there effective ways get home without damaging the structure of windows and doors? There are options, and anyone whose balcony door is not equipped with a double-sided handle should take note of them.

Why doors jam: main reasons

First, let's figure out why the balcony door of a balcony or loggia, which was working properly before, does not open. There may be several reasons. One of them is careless handling. Sudden movements on a plastic balcony door can lead to the opposite effect - the latch mechanism will not work correctly and the exit will be blocked.

Malfunctions of the components can also affect the door malfunction. So, for example, the reason is:

• in malfunctions of the lock mechanism when opening the door in the “ventilation” mode;
• the handle is broken;
• in a distorted structure;
• in freezing of the system due to condensate formed between the box and the seal.

The listed faults are not critical. As soon as you can determine the reason for the jamming of the blade, you should try to gently return it to the “open” position. It is important at such moments to remain patient and not panic, trying to break the product. A broken balcony door will add hassle and cost to repair and replacement.

Options for “release” from a balcony blocked from the inside

If the plastic door to the balcony is jammed, where there is at least a minimum set of tools (it wouldn’t hurt to keep it there just in case), then the situation can be considered controlled. A simple screwdriver is enough to gently press out the lock latch, lightly pressing the fittings. If everything is done correctly, the door leaf will open a little and you will be able to stick your hand in for the final opening.

Instead of a screwdriver, a spatula, hacksaw or knife are suitable for these purposes. The main thing is to try, using a sharp object, to lift the bead that secures the double-glazed windows on each side of the door, disconnecting it from the central part to the edges. The same manipulations need to be done from above and below, and then try to remove the glazing bead by pulling it in your direction, thus freeing the glass unit.

An important point: the weight of a double-glazed window in a balcony door design can exceed 30 kg, so you should be extremely careful when holding it after all the manipulations.

After the glass unit is removed, unhindered access to door handle from the inside. Even if the lock does not work and the door cannot be opened, you can get inside through the window opening by continuing to repair the door in a warm room.

Attention! Do not try to knock out the glass unit. The outer glass is quite thick and will most likely withstand the onslaught. Only heavy glass can handle glass with a thickness of 4 mm or more. metal object. Glass shards can cause injury, and replacing double-glazed windows will require investment.

Ruler for unlocking a balcony door - how to use?

If you don’t have a set of tools, a knife or a hacksaw when the balcony door jams on your loggia or balcony, but you can use a metal ruler, it’s worth trying to get out with it.

Just as in the case of the sharp objects listed above, you can use a ruler to pick up and pull down the blade latch. Actions must be careful, without rushing caring attitude to the material of construction. The plastic is flexible enough so the ruler can reach the target.

If you can’t open the latch with a ruler, for example, when the reason for the jamming is not in the lock, you should try an effective and delicate method of unscrewing the door hinges. It will be easier to complete the task if you know their structure. Typically, a balcony door hinge is a metal insert with fasteners, a frame part and a spacer sleeve.

By adjusting the composite hinges, even when the door is stuck, you can move the door slightly in the desired direction.

Important: most often the screws of the door leaf are disguised with decorative overlays.

The door is jammed: what to do indoors

It’s not so unpleasant to be faced with the fact of a jammed door indoors, having at hand everything you need to solve the problem on your own, as well as the opportunity to call a specialist who knows what to do if the door to the balcony is jammed and how to set it up normal work without replacement.

Often the balcony door gets jammed from the inside during ventilation mode. To solve the problem, you can simply set the handle in a horizontal position, and then try by touch to find the metal tongue at the end of the blade in the lock area, setting it in a vertical position.

As an option, it is also worth trying to press the spring-loaded plate responsible for locking the lock, or to align the blade in a vertical position, attaching it to the box and turning the handle all the way down. These actions help to open the balcony door from the inside without radically interfering with the operation of the system.

In conclusion, we note that no one is immune from troubles associated with the operation of balcony door systems, and it is not so important whether the structures are equipped with an additional handle on the outside or not. The main thing is to be prepared for any force majeure situations, having a simple set of tools on your balcony or loggia that allows you to open a jammed door. Prevention of damage will include regular maintenance of the door, including lubrication and adjustment of hinges, and timely repair of fittings.

Return