How to hang flowers. DIY flower pots – best ideas, master class, photo

Warm days are approaching, and many will want to take their flowers out onto the balcony or loggia. But sometimes there is not enough space for flowers and you have to look for ways to place them. I really like vertical gardening. And for a convenient vertical position flower pots You can make a flowerpot for them with your own hands using available materials.

1 Hanging planter made from strips of fabric
- 1.1 Pot made from a plastic bottle
- 1.2 This is also interesting

Hanging planter made from fabric strips

Almost every woman collects several knitted T-shirts over the course of a season, which she no longer wants to wear and would be a pity to throw away. You can make a lot of useful things from them, as well as make cords for weaving flowerpots.

To do this, you need to cut strips about 2 cm wide across the product. It is better not to use a hemmed edge. You should end up with a ring with two seams, one of which needs to be cut, and then the strip should be stretched. You will need from 4 to 6 strips depending on the length.

If the strips are long, then 4 pieces will be enough. They need to be tied into a knot in the middle. For short strips, make the knot closer to the edge.

Then you can start weaving flowerpots. For convenience, you can use an empty flower pot.

The photo shows in some detail the scheme for connecting the strips. Repeat the process of tying knots depending on the height of the pot to prevent it from falling out of the pot in the future.

The remaining ends of the cords can be simply tied into a knot, or they can be tied to a ring to make hanging more convenient.

Pot made from a plastic bottle

This pot is more suitable for use in the country. Cut off the top of a plastic bottle the right size. It is better to melt the cut edges so as not to injure yourself or damage the plants later. Make 3-4 holes and stretch the rope through them.

Such a pot can be hung on an old tree or used on a balcony, having previously planted flowers or herbs in it.

In the same way, you can use plastic bottles with handles from under household chemicals. Naturally, they need to be washed thoroughly before use.

Then cut off the bottom of the bottles, turn them upside down, attach them somewhere, fill them with soil and plant the plants. By the way, if you don’t tighten the lid tightly, excess moisture will not be retained in the container and the plant roots will not rot.

Of course, the bottles can be decorated beforehand, but only if the desire arises.

In this article we will talk about how to make original flowerpots for your home and office with your own hands.

Often a home or office is decorated with plants - they are pleasing to the eye and purify the air. In addition, representatives of the flora can be successfully included in the interior, creating your own special style. And various interesting flowerpots will help with this.

Macrame flower pots: master class for beginners, weaving patterns, photos

A macrame flowerpot for a glass vase in which flowers will grow is quite elegant and unusual idea. For such an airy craft you will need:

White nylon threads
Scotch
Scissors

The operating procedure is as follows:

Have to take 8 threads, and fasten them.

Next, the ninth thread of macrame need to re-tie the main threads under the bond. Eventually there should be a loop.

Now it is necessary divide existing thread bundle for 4 groups. Each of them must, in turn, contain 4 strands of macrame.
Next you need to adhere to the following weaving patterns:

At the end of the work it is recommended trim the ends threads, as well as some melt. You can create tassels.

Weaving flowerpots from twine, ropes, jute step by step: diagram

You can use twine, ropes and jute to weave flowerpots in the previous style. Or you can create a miniature bike-pot! And here's what you need for this:

IMPORTANT: You must purchase polymer-based glue.

Operating procedure:

On cardboard you need draw templates for the wheels. IN in this case 3 wheels required.
They cut out, and each wrapped with twine.

Cocktail the tubes need to be cut, departing from the bend approximately 2 cm each. For one wheel will need to create 4 such blanks from tubes.

Each such workpiece should wrap with twine as tightly as the circles were wrapped.

That's it 4 straws necessary attach the folds to each other. They are necessary glue.

Received cross from the tubes you need attach to circle- this will be a wheel. They should be made, as indicated, three.

Now I need to take more 2 straws. One of them has the top cut off. You need to insert the part that is without a top into the fold of the whole tube.

IMPORTANT: The structure must be wrapped with twine in the same way as the previous blanks.

Necessary cut 2 more tubes near the fold. But this time you need to retreat 2 cm from the top of the fold and 3 from the bottom.

Now they are needed connect as shown in the picture, and wrap with twine- this will be the steering wheel.

Need to prepare one more tube the length of which should reach approximately 11 cm. And her, and the steering wheel, and the wheel are desirable decorate with coffee beans.

Sticks, pre-decorated with twine, you need insert into wheel just as shown in the picture.

You can start fastening the wheels together.

Between the two front sticks attached to the wheel, it is necessary install a piece of another stick. All this then wrapped with twine.

Remains decorate the pot itself.

IMPORTANT: Since it is small, you can use some kind of cream jar as it.

How to buy floor and wall flower pots on Aliexpress?

Those who want to find something original and ready-made can contact the Aliexpress online store. Beginners are recommended to first read the video instructions.

Now about how to find among the variety of products, treasured flowerpots:

The first stage of searching for flowerpots on Aliexpress is choosing categories For home and garden, Home decor

Now you need to click on Home and Garden

In Categories you need to click on the arrow and scroll through the menu to the end

Next, select the item For the garden and vegetable garden - in it you can easily find flower pots for your home or office

You need to click on the category Flower pots and flowerpots

You can choose a pot of any size - for example, compact, size S, medium, large and even giant.

It is also possible to immediately select a flowerpot depending on its location - floor, tabletop, wall-mounted, hanging models.

Style is another indicator by which you can quickly filter what you need. For example, it is possible to choose a pot of European, modern, classic, rustic, American, Chinese, Mediterranean, cartoon style.

The color palette is amazingly diverse! Available in white, red, green, yellow, blue, black and many other colors and shades.

Some kind of certain material? No problem! Pots are available in plastic, metal, ceramic, glass, wood, stone, plant fiber, fabric and so on.

You can even choose the type of metal - for example, cast iron, iron, tin, etc. Or the type of plastic - PVC, polyresin, polyester and other types. The types of ceramics are also different - for example, porcelain, clay.

Even the type of coating can be filtered - glazed, powder, vinyl, epoxy, etc.

How to make beautiful outdoor pots for indoor flowers with your own hands?

For making gypsum floor planters you will need:

The plaster itself

IMPORTANT: It is preferable to purchase not construction plaster, but special decorative one. It can be found in stores that sell craft supplies.

Some unnecessary container
Material such as fabric, linen or paper
Glue, pins, staples, tape, rope - in other words, anything to attach
Scissors

Do the pots are very simple:

The container needs to be wrapped any available material from those listed above. For example, it could be papier-mâché, crumpled paper. In the example under consideration, the capacity is small - can. But for a floor planter, you can choose something larger.

Fabric needed secure on the container.

Now you need dilute the plaster until liquid consistency.

Further liquid plaster must be applied directly onto the fabric of the blank under the flowerpot. It is recommended to form several layers.

IMPORTANT: Before processing each subsequent side, you should wait for the plaster to dry on the previous one.

How to make beautiful wall pots for indoor flowers with your own hands?

A whole garland of flower pots will decorate any room. For her you will need:

Small clay pots made of plastic
Willow or hazel branches
Pliers
Wire

Making a wall composition is not difficult at all:

Branches you just need intertwine among themselves, forming a wreath from them
Using wire you should attach pots to branches

IMPORTANT: The wire should be passed through the holes in the pots, then thrown over the clay products themselves.

How to make beautiful hanging pots for indoor flowers with your own hands?

IN modern style fits in perfectly hanging planter made from multi-colored tubes that glow in the dark. For such a product need to stock up:

Neon straws at the rate of 8 pcs. for one flowerpot
Neon threads
Scissors

Operating procedure:

So first of all from the threads need to cut off 8 pieces. Each of them must be within from 90 to 150 cm. It all depends on how close you plan to place the flowers to the ceiling.
Now all 8 threads should to tie so that at the end of the resulting ligament a small brush.
The workpiece should be placed on the surface and spread out in a special way. It should work out cross shape, on each side of which you will have 2 threads each.

Now you need to take straws And cut off them where there is a fold.
These pieces, in turn, also need cut 2 parts.

IMPORTANT: There should be a total of 8 pieces of tubes.

Every the piece should be put on threads one for each. At the same time, they need to be moved towards the center - to where there is a knot.
Every 2 threads should be on top of the tubes tie in a knot.
Again the threads need to be laid out in a cross different shapes . Only this time you need to connect 2 threads from sections adjacent to each other.
And we need it again pieces of straws. This time you need to prepare 16 pieces. The length of each should be equal to the length of a small piece of the whole tube before the bend.
Now 8 pieces need to be threaded, again tied in a knot threads of each section.
And it needs to be done again cross layout by connecting threads from adjacent sections. And again we need them paint with the last 8 pieces of tubes.

All that remains is hang a flower pot and place a pot of flowers there.

How to make beautiful tabletop pots for indoor flowers with your own hands?

A small flowerpot made of clothespins looks quite cute and unique. To make it needed:

Here's what you need for a table planter - clothespins, acrylic paints, decor, glue gun

Operating procedure:

First of all, the clothespins will have to be divided into two parts as shown in the picture

This is how you need to separate the clothespins for the flowerpots

Every part is needed paint
Now all these blanks need to be glued around the pot

IMPORTANT: The pot must be miniature. As an alternative, you can use a cream jar, for example.

Now you can start decor

Weaving flower pots from newspaper tubes: diagram, photo

Making flower pots from newspapers is quite easy. For this you need the following:

You can start:

Each package must be marked 8 strips measuring 7 x 30 cm.

Now these stripes need to be cut out. Place a wooden skewer on the corner of each of them. twisting the paper diagonally. Each tube is needed secure with glue.

The container must be covered with paper– this will avoid gaps in design. You need to glue the tubes to the bottom as shown in the figure. You can also go to the bottom glue the cardboard circle.

Now you need to cut it out of paper strips measuring 7 by 45 cm. They should also make tubes.
The already glued tubes need to be pressed against the wall of the container. One of the long stripes should be glued to the side and then weave it around the others.

IMPORTANT: You need to braid as if you were weaving a basket.

As soon as the bottom of the vertical tubes are braided, we need to continue weaving. But in the opposite direction. If necessary, the tubes should be glued and extended. This way the entire pot is woven together.
Then you need pierce at the top of the container holes for twine. The easiest way to do this is with a heated nail. Through the holes you need thread the twine, securing it with knots. The knots should be masked with paper.

DIY felt flower pots

This master class was originally dedicated to Easter, but instead of Easter paraphernalia, you can place fresh flowers in the pot. So, needed:

Felt in two green tones. You can add brown, yellow and white color
Container-pot
Hot glue gun
Scissors

You can get started:

From dark green felt needed cut the grass.

IMPORTANT: It is advisable to make the blades of grass different in width, height, and shape.

What follows are glue with a gun around the container.
From light green felt is also necessary cut the grass. But this time not in the form of individual blades of grass, but in the form continuous fabric. Moreover, it should be lower than the dark green blank.
And light green grass needs to be glued.
Now you need to cut made of brown material boards for the fence, as well as several thin strips.

Brown pieces are attached glue to the grass at approximately the same distance from each other. They are needed tie with stripes.

To top it off, you can cut it out of white and yellow felt. details for chamomile. This is an optional step, but it will make the pot look nicer.

This is what the felt pots look like in the end, in which you can place fresh flowers

How to make flower pots from an old T-shirt: video

You can also use an old thing to create a flowerpot:

How to crochet flower pots, and from what threads: diagrams with descriptions

Eye-catching pots are desirable from bright yarn, and there are no restrictions on the choice of texture. It is desirable, however, that they be acrylic, thin cotton.

The following scheme will do:

IMPORTANT: Despite the fact that the pattern is presented with a bottom, it does not need to be knitted. After all, many pots are equipped drainage holes. Perhaps the bottom can be tied if you intend to use a pot for a pot with a moisture-loving plant.

So if bottom still necessary, then you should start knitting with it.

If not, then you should start with chains of air loops, which matches the length of the bottom of the pot. This chain needs to be closed, after which, following the diagram, continue knitting upwards. Wherein in every third row you need to add loops.

Cross with a dash means that the hook is inserted exclusively under the back or front wall of the loop. You will get a nice finish at the bottom and top of the plant pot.

IMPORTANT: If the container is shaped like a cylinder, increases in rows are not needed.

How to decorate flower pots: decoupage, photo

In order to make a cute flowerpot in lilac tones in decoupage style, you will need:

Decoupage napkins
Lace
Glue gun
White water emulsion
Brush
Decor elements

Decoupage is done as follows:

First you need make a primer. To do this, take equal parts water, water-based paint and PVA glue. All this needs to be mixed thoroughly with a brush.

IMPORTANT: Before starting work, it is necessary to check that the surface of the flowerpot is not dirty or covered with anything.

Then it is added gouache lilac color. Or, if it’s not there, blue and red.
So colorful the primer must be applied with a brush, ignoring the bottom and rim of the flowerpot.
After drying of the first layer preferably apply a second one.
Now you can choose suitable pictures on a decoupage napkin, cut them and separate the color layer.
Costs try on pictures for the pots, noting where they will be located. These places are needed Cover with glue using a brush.
Now you need attach pictures while applying glue also on top of them. All irregularities should be smoothed out.

IMPORTANT: Move the brush from the center down.

The edging should decorate with lace by gluing it. The edges of the lace must be carefully folded, and the junction of the edging must be decorated with decorative elements.

Master class on making flower pots: Video

Ideas for flowerpots: Video

No more space on the windowsill? This method will be interesting to those who cannot place their favorite flowerpots even on the floor!

I really like the idea vertical gardening . And all because this method helps to save space when there is a lack of space and frees window sills and other horizontal surfaces from green spaces, and it also looks unusual, stylish and very beautiful.

And today the editorial office "So simple!" invites you to find out interesting ideas how to do beautiful hanging flower pots using simple and accessible materials. Now this is not a balcony, but a real Garden of Babylon!

DIY hanging planter

And I'll probably start with macrame techniques, which, in my opinion, is most suitable for creating hanging flowerpots.
Flowerpots using this technique can be either very simple, which can be made in literally 10-15 minutes with your own hands, or complex - the result of many hours of work.

Therefore, I suggest you practice on easier ones first, honing your skills, and then move on to more complex ones.
Hanging pots made from metal baskets can be immediately filled with substrate, but in order to prevent moisture from passing through, coconut fiber must be laid at the bottom, and this will only improve appearance flowerpot.
Great idea for crochet lovers!
Hanging planter made from straws will suit the interior with innovative notes. Just grab a pack of neon cocktail straws, some strong thread and get started. And even 15 minutes will be enough for this!
Old hoops, good glue, an unnecessary bowl - and after 20 minutes you are the owner of such an unusual and very stylish flower pot.
To do this, place half of the hoop vertically, place a bowl inside horizontally and mark the points of contact on the hoop. Glue is applied to them, a bowl is placed and left until the glue hardens.
For creating hanging flowerpots You can use a wide variety of materials available around the house: baskets, buckets, bottles and even old balls!
Here are some simple master classes on macrame weaving techniques.

I love these options!
Wood also provides a fairly wide range of actions, a variety of shapes and colors. Just choose what you like best and create!

And this is not even a flowerpot, but a real shelf for flowers! Arm yourself with the old one cutting board and strong threads, and to prevent the flowerpots from falling and the board slipping out, make small grooves along the edges of the board or secure the threads with a drop of glue.

In my opinion, this is an incredibly simple and at the same time quite elegant idea!

This hanging planter will wonderfully complement your home interior. It’s quick and easy to do, and it won’t cost you a lot of money on materials either.

To see the process itself weaving flowerpots using the macrame technique, I suggest watching this video.

This is a great idea for a hanging pot for orchids! A decent result, but everything is quite simple and easy, isn’t it?

I also suggest you familiarize yourself with 6 wonderful ideas

Even the brightest flower beds need a frame - “outfits” that will further emphasize their beauty. Street flower pots are rightfully considered the most spectacular and at the same time simple “outfits”. Making them with your own hands will not be difficult. Do you want hanging planters made from bottles, wicker from wicker, or ground-mounted from a tree stump? No problem! Read the instructions on how to make flowerpots from these and other materials, and also watch educational photos and videos - they will help you transform your garden beyond recognition.

Making flower pots from rags and cement

To make such a flowerpot, you will need:

cement;
old tablecloth;
vase, pot or other vessel for form;
water;
bucket;
“mixer” – attachment for a drill;
dye.

The procedure for creating a flowerpot is very simple. First you need to prepare cement mixture. To accurately determine its volume, take a tablecloth, place it in a bucket and mark on the walls how much space it takes up - according to this mark, pour water for the solution. Add cement to the water and mix them with a “mixer”. The result should be cement laitance, reminiscent of slightly runny sour cream in consistency.

Then, when the mixture is ready, place the tablecloth in it and leave for a couple of minutes until it is completely soaked. After this, remove the material and make sure that there are no dry areas left on it.

Next, take the prepared container for the mold and hang a wet tablecloth on it. Gently straighten the material and leave to dry. When cement mortar completely hardens, remove the product from the container-form and paint. Use special paints for concrete - they are stronger and more durable. Once the paint has dried, you can use the pots for their intended purpose.

Making flower pots from plastic bottles with your own hands

Plastic containers – universal material for flower pots, since several models of “outfits” can be built from it at once.

The first option is a classic flowerpot. Take plastic bottle, two CDs, sandpaper, scissors, glue and paint. Cut the bottle into two equal parts using a wavy line. Clear sandpaper both disks. Take the bottom of the bottle and glue it to the stripped first disc. Then take the top part: first unscrew the cap and glue it to the second disk, and as soon as the glue dries, screw the plastic part of the bottle back to the cap. When finished, coat the pieces with paint.

The second option is a hanging planter. Here you will need: bottle, rope, paints, scissors. First, cut off the neck of the bottle - only the straight bottom part of the container will be used. Then cut small holes on the sides for the rope. Then decorate the structure: paint, cut out patterns, draw an animal, trim the top edge - whatever you can do carefully. And then thread a rope through the holes, place a flower pot in the flowerpot and hang the structure on strong nails.

We make wooden flower pots

The easiest way to make a flower pot is from a stump or log. Take:

wood;
drill: drill length – at least 25 cm, diameter – at least 20 cm;
chisel;
protective impregnation for wood.

Select a log or stump of the required diameter. Measure the part according to the height flower pot or a flowerpot and cut it off - this is again a flowerpot.
Drill a series of holes into the top plane of the wood to destroy the core.
Use a chisel to remove the wood - you should be able to empty container. The edges need to be aligned.
Treat the inner walls of the pots protective composition and place a flower pot in it.

Advice. The wooden planter itself can also serve as a pot, but to do this, you need to put durable polyethylene in the container and cover it with drainage on top. And only after that you can place the soil mixture with the flower.

A more complex option is a flowerpot made of boards and timber. You will need:

beams with a section of 25x25 mm;
boards 15 m thick;
self-tapping screws;
wood glue;
drill;
protective impregnation for wood.

The algorithm for making pots is as follows:

Assemble a cube-shaped frame from the beams.
Cut out parts for the bottom and walls from the boards. Sand the panels on all sides.
Drill several holes in the bottom for drainage.
Assemble the design of the flowerpots together: attach the side and bottom panels to the cubic frame using self-tapping screws. In order to give the product even greater reliability, carefully glue all joints.
Cover the surface finished design protective composition.

We weave flower pots from wicker

Another simple one, but interesting option flower “outfit” - a flowerpot made of vines. Prepare for work:

flexible vine - it can be either fresh or dried;
plywood sheet;
moisture-proof impregnation;
drill;
awl;

First, soak the vine in water - this will give it the extra flexibility needed for easy weaving. Cut a blank for the oval or bottom from a plywood sheet. round shape. Along the edge of the resulting bottom, drill identical holes with a diameter slightly smaller than the diameter of the vine. All holes should be at the same distance from the edge of the bottom. Then insert a strong twig into each hole - this will be a blank for the frame of the flowerpot.

The next step is direct weaving: lay the vine between the rods, gently pressing each new row using an awl. Wrap the twigs until the product reaches the height you require. Laying methods can and even need to be changed after a row - this way you will achieve a different textured surface of the pots.

At the end of the weaving, either cut the rods or weave them into the main rows of the vine. Then let the structure dry a little and get stronger. Final stage– treatment of flowerpots with moisture-proof impregnation and varnishing.

We make plant pots from plaster

To make such a pot, prepare:

gypsum;
wire;
textile strips no more than 10 cm wide;
paint;
bucket;
protective varnish.

The first step is preparing the frame. Turn the bucket upside down and braid its surface with wire. Tuck the edges and hide. Carefully remove finished frame from a bucket.

The second step is diluting the gypsum solution. Take gypsum and mix it with water until the mixture begins to resemble sour cream.

The third step is the construction of the “body” of the flowerpot. Dip all textile strips into the plaster solution and soak for 3 minutes. Then take out the tapes one by one and place them on the frame layer by layer. The thickness of the walls should be at least 2 cm. Then carefully treat the walls of the structure with the remaining gypsum mortar. After this, the pot should dry completely - set it aside for 10-12 hours.

The fourth step is design design. Flowerpots can not only be painted, but also decorated with various pieces of glass, beads, pebbles - any small details that you like.

Advice. After drying, the walls of the pots will not be completely smooth, so the paint will not apply well. To avoid this, carefully clean the surface with sandpaper and treat the structure with white water-based composition, and then apply paint of the required color to the flower pots in the second layer.

Now you know that you can make a beautiful flower pot from almost any materials, without spending a lot of time or big finance. The main thing is to turn on your imagination and be smart. So if you want to effectively decorate your garden, don’t rush to shop pots– take the initiative into your own hands and don’t be afraid to experiment.

How to make a flowerpot: video

Planters for the garden: photo

Outdoor hanging flowerpots placed on a summer cottage or garden plot create bright accents. They grow low, compact or ampelous varieties of flowers, from which contrasting or harmonious compositional groups can be created. It’s easy to make hanging flowerpots with your own hands using a variety of household items. By organizing proper care for plants grown in pots, you will be able to long time provide magnificent landscape decor.

Show all

Advantages of outdoor planters

Growing flowers in hanging flower pots has a number of advantages compared to stationary flower beds:

hanging containers are mobile and can be easily moved to the desired location;
in such devices, ampelous flowering plants look great, for which there is enough space to create spectacular waterfalls of flowers and leaves due to hanging stems;
it becomes possible to create suitable conditions for each specific plant;
during inclement cold weather in autumn period you can bring flowers indoors;
hanging flowerpots do not take up space on the site, which is important when small area yard

No need to search suitable models in stores, since hanging flowerpots are easy to make with your own hands from available materials. A variety of containers are used for this purpose, which are additionally decorated with decorative elements.

Types of fastening

Outdoor hanging flowerpots are located on the structures of houses, balconies, verandas, and gazebos. They can be hung on tree branches and fences. Convenient device is a tripod or a mobile vertical stand of a different shape with several branches, which is installed anywhere in the garden. To fix the flowerpots, various types of fastenings are used.

Vertical stand

To place flowerpots to decorate a building, durable forged brackets are used. Their stylish design adds an additional decorative touch to the surrounding atmosphere.

Forged brackets

A convenient type is a retractable mount that has two carabiners - one under the ceiling, and the second holds the flowerpot. This design greatly facilitates maintenance, as it allows the plant pot to be lowered down to 0.9 meters.

Retractable mount

A lightweight option for fixing containers with flowers is a forged hook. It is easy to install and move as needed.

Flowerpot on a hook

Often flower pots hung using decorative chains, which can have different designs and dimensions.

Mounting on chains

By tying strong twine, cord or rope to the container, you can securely attach the flowerpot to the selected support.

Use as a rope fastener

Balcony stands. Convenient openwork drawers with a specially curved fastening securely hold them on the balcony.

Balcony stand

Suspended structures, oriented for fixation on fences, perfectly decorate this element of the landscape.

Attaching flowerpots to a fence

Reliable fastenings ensure the preservation of the composition created from hanging flower pots for a long time.

Planting flowers, care rules

The choice of method for planting flower crops is determined by the shape and design of the flowerpot. If the container has a shape identical to the pot, then lay a layer of gravel and add one suitable for the selected variety soil mixture and seedlings are planted or sowing is carried out. Openwork varieties need to be filled fibrous material or moss. A moisture-proof film is laid on top and soil is poured.

With a limited area for growing flowers in pots, it is necessary to practice correct agrotechnical planting techniques and provide timely care. The soil substrate must have a loose structure. If the site is dominated by heavy loamy soil, it is mixed with compost and sand in approximately equal proportions.

Basically the flowerpot performs decorative function and is used as a tray in which pots with plants are placed. Such flowers need to be watered every other day, since moisture evaporates from the soil slowly. Half an hour after watering, the pan is checked. If a lot of water from the pot has leaked into it, it should be poured out. But often the soil is poured directly into the pots. In such a situation, in order to prevent moisture stagnation, drainage holes are provided in them.

Plant care includes weekly feeding with a special liquid complex containing the necessary mineral elements. It is diluted according to the instructions.

On hot days for hanging plants provide for irrigation warm water. Dry shoots, leaves, and flowers are removed regularly. To ensure the appearance of new shoots in order to form a lush crown, you need to trim the tops of the stems.

Selection of plants

To flower arrangements hanging flower pots looked stylish and beautiful, you need to think about the range of plants to grow. Crops that form compact bushes and ampelous types of flowers are popular. The characteristics of each plant are taken into account and suitable conditions are created.

Large funnel-shaped flowers of Achimenes add color to any landscape for a long time. When growing, it should be taken into account that this crop belongs to light-loving varieties.

As it grows, bacopa forms a lush ball of leaves strewn with small exquisite flowers. This plant is characterized by repeated flowering after a period of dormancy, which lasts approximately 20 days.

Possessing the original colors of its petals, balsam leaves a lasting impression when grown in any landscape. It needs a lot of light to produce many buds that highlight the dense foliage.

Begonia is a shade-tolerant crop that perfectly decorates areas with insufficient light. The variety of colors inherent in the varieties of this flower allows you to create original plant ensembles.

Verbena - this plant is decorated with bright green leaves combined with small purple, pink or blue flowers.

To decorate the garden, dacha area many choose geranium, choosing the appropriate one for the composition being created color scheme of its flowers.

Dichondra - the decorative appearance of this variety is given by long hanging shoots strewn with round green leaves. Yellowish small flowers remain practically invisible.

Campanula ampelous - the stems of this flower culture reach a length of 30 cm. Gorgeous flowers, reminiscent of a bell, have two shades, which determined popular name- "bride and groom". Abundant and long-lasting flowering allows you to create eye-catching compositional spots.

Campanula equifolia - a flower strewn with an abundance of original buds, can delight with its splendor until the beginning of autumn, if the wilted inflorescences are immediately cut off. It is necessary to provide protection from the sun during midday hours.

Delicate lavender fills the surrounding atmosphere with a piquant aroma. This plant needs sandy loam alkaline soil and daily watering.

Unpretentious lobelia can be planted in the shade if it is not possible to allocate it sunny place. With regular watering and fertilizing, it blooms throughout the entire summer season.

Nasturtium - this one unpretentious flower often cultivated on adjacent areas and looks great in pots. Attracts with its unpretentiousness and the ability to tolerate light shadow well.

If petunia is grown in flowerpots or hanging flower pots at the dacha, a magnificent color scheme for the area is created. She needs good lighting.

Surfinia - the plant has pronounced powerful shoots. Its flowers are painted in shades of varying degrees of saturation. There are purple, blue, white, yellow varieties.

Tumbelina - a spectacular variety ampelous petunia, looks majestic and creates a festive atmosphere.

Magnificent fuchsia is appropriate to place under a canopy or roof to protect it from the harmful burning rays.

When creating flower arrangements, you can select other plants suitable for cultivation in hanging pots. Color solution depends on the predicted final type of the site being designed. They will bring multi-colored harmony different varieties one flower crop, differing in the color of the buds. Interesting combination created from different types plants placed in a pre-designed order. There are a lot of variations, and each has its own unique flavor.

Making your own flower pots

In an effort to make outdoor hanging planters with your own hands, you need to think about them exterior design, fastening methods, prepare material. Outdoor flowerpots, suitable for landscape design, can be made from different materials. Popular plastic containers, easy to process and attractive in appearance. Serves durable material metal, wood. Having mastered the skills of knitting and weaving, it is possible to create unique openwork products.

Wicker varieties. Having prepared willow rods, they weave shapes in the form of a rectangular or round basket. Having mastered the basic skills, you can later create original products, imitating the figures of birds, animals and other objects.

Fabric pockets. Bags sewn from thick burlap or felt will add individuality. Cut out two parts the desired shape, grind off, leaving the top open. Front side decorate according to your own taste. Use beads, ribbons, braid. Sew a fastener from a strip of fabric or rope, place a container with a plant inside and hang it, for example, on a fence.

Knitted flowerpot. It will be easy for craftswomen who master the crochet technique to make an openwork base for installing a flower pot in it. The yarn selected is moisture-resistant and durable, which will allow you to maintain the original decor throughout the entire period of operation.

Wooden product. To make a simple design, you need to saw wooden blocks of the same length, approximately 20 cm. They are laid in the shape of a square box, maintaining a checkerboard pattern. Self-tapping screws are used for fixation. Tie a rope to each side, hang it on any tree or hook.

Plastic container. Having volumetric plastic container with a wide neck, prepare fasteners from thick aluminum wire. Cut three pieces 25 cm long. Bend one end of each wire with round pliers to make a ring. The other end is bent in the shape of the letter “P”. During work, you need to control that the length remains the same. Using an awl, three holes are made below the neckline, into which the prepared hooks are inserted. The pot is ready for planting flowers and hanging on the bracket.

Varieties

Well decorated various items, lost performance. With a little effort they turn into original pots for plants old watering cans, teapots, bottles and even shoes. There are many options.

By saving a cage that was previously intended to house birds or hamsters, you can easily turn it into original decoration garden To do this, you just need to place a flower pot in the center and hang it on the selected object.

Having served my term ceiling chandelier dismantled, leaving only cups for fixing containers with plants. If necessary, the decor can be updated by painting.

Beautiful vase unusual shape is an independent decoration, but in combination with delicate buds you get a complete, sophisticated ensemble.

Forged hanging flowerpots look prestigious and noble, harmoniously fitting into any compositional group.

Even a boring and inexpressive fence will be transformed by placing a container fixed with a simple fastener. After flowers grow in it, a stylish corner is formed.

A leaky old watering can is cleaned of dirt, treated with sandpaper and given bright decor, painting with weather-resistant paint and painting.

Metal, plastic, and enamel buckets act as flowerpots. If they have already lost their external luster, the problem can be easily solved by painting.

Ceramic and plastic pots remain the most popular options for creating hanging planters. They can have different shapes and dimensions. You just need to think about a reliable fastening.

By attaching hooks to one of the sides to a regular shipping box, you can hang it on the fence of a veranda, gazebo or balcony.

A small wooden tub in which flowers are planted will not take up space on the site if it is securely fixed on the wall of the garden house.

There is no need to throw away old bags, as they can act as eye-catching plant pots. They usually do not require preparatory restoration work. You need to put flowers planted in a pot in them and hang them using a strap.

Any old wheel can be turned into suspended base to accommodate flowering plants. You can even hang it on a tree.

There are many options for transforming familiar items into comfortable and attractive hanging planters. For a similar creative activity no special skills required.

Creating a complete image of a summer cottage or personal plot using a variety of ideas for making hanging flower pots allows you to independently transform existing items into stylish decorative designs. Placing flowering plants in them creates a unique ensemble that charges with positive energy.