The Rubik's cube is already a thing of the past. Today's kids are obsessed with pocket-sized toys that spin around. Children are so captivated by fidget spinners that some schools have already banned bringing them with them. On the other hand, toys help relieve stress and calm children who have a special temperament.
Fidget spinners are now collectible and have something of a status status. No child wants to show up at school without the most basic gaming device. If you're on a budget and want a great toy that really stands out from the crowd, there's an easy solution: you can make your own spinner.
There are a few in various ways make a spinner, for example, cut it out of cardboard or use old recycled lighters. However, if you try this at home, be aware that the fidget spinner may cause damage to your skin. With that said, there is simple methods. The choice is yours.
How to make a spinner using plastic bottle caps
To do this you need: 4 plastic caps, a box of cereal, a knife, super glue, a plastic mug, paint or glitter
Collect four bottle caps. Take four plastic lids from used bottles that have same size. Glue them together so that all sides meet the middle cap, and then bend the hole in the middle bottle cap with a toothpick.
The weight of the glue inside the caps. Some people prefer to stick pennies on inside caps for added weight, but household items such as magnets will work the same.
Replace bearings with paper. Place the bottle cap over the plastic cup and cut out a circle. Once the circle is cut out, punch a hole the size of a toothpick and place a plastic circle on the inside of the bottle cap to line the empty space. Then take a penny draw 10 circles on the box and cut them out.
Make sure all holes line up with each other; it will be important step to the correct rotation of the spinner.
Glue the circles together. Stick your toothpick in each circle and glue the five cardboard circles together, lining up the small holes. Take two more penny circles and this time avoid punching a hole through them and glue each circle to one side of each five.
Attach all the parts together with glue. Take a toothpick and one stack of cardboard circles and glue the toothpick in the middle. Attach a toothpick to the center of the middle bottle cap and cut off the end. Leave a little toothpick on the opposite end and glue that end in the middle of another stack of cardboard circles to act as a bearing. Your spinner should now spin like the original.
Decorate your creation. Now that your spinner is almost ready, paint or adding some sparkle to your toy will complete the job.
How to make a spinner using skateboard bearings
Materials needed: plain bearings, knife, thick rubber band, super glue.
- Assemble three skateboard bearings. Take the three skateboard bearings you have chosen and align them together horizontally. Take the middle bearing and pull out the middle tread with a knife to expose the inside of the wheel.
- Glue them together. Glue the three bearings together in a straight line with super glue and wait until they dry.
- Cover with rubber band. Wrap a thick rubber band around the outside edge of the three support bearings for support, and decorate the rubber band if you want to add some character to your new toy.
- Can be done Alternative option spinner, which looks more like a traditional spinner. You need to assemble four skateboard bearings and follow all the same steps. The middle bearing will have an open wheel, and the other three should be glued proportionally, around the center.
- Once your feeder is complete, place your thumb and middle finger into the center of the toy and throw away the stress of life.
How to create a paper spinner
What do you need for this:
- Cardboard.
- Scissors.
- Safety pin.
- Toothpick.
- Glue.
- Stickers.
- Cut the cardboard into four small circles and one propeller shape.
- Poke holes in the center of each of the circles and the propeller using a pin or pointer.
- Apply a spot of glue to the back of one of the circles and insert a toothpick through the hole. Add a second circle to the toothpick and press the pieces of paper to seal the glue and attach the pieces to a toothpick.
- Add the propeller to the toothpick.
- Repeat step 3 with the remaining two circles, leaving about 1/4 inch between the first set of circles and this one (the propeller needs room to spin).
- Remove extra ends toothpicks from the spinner and decorate with stickers.
Spinner is the most famous toy to date. Popularity is growing every day, everything more people want to buy this toy. There is not a single person who has not heard of this simple invention. But many people want to make a homemade spinner so that it is unique.
Peculiarities
- The toy perfectly develops finger motor skills in children;
- Used as an anti-stress. Can relieve excitement, anxiety, excessive excitement, anxiety, etc.
- Can help get rid of bad habits: tapping on the table, biting nails, etc.
Principle of operation
The operating principle is quite simple: the most important part of the toy is the bearing in the central part. The speed and time of rotation of the toy depends on its quality.
You can play with this simple device with one hand: you need to grab the center with your thumb and middle (or index) finger and set the toy in motion by touching the wings of the spinner.
How to make it yourself
Due to the fact that this toy has such a simple operating principle, the shape and material of the spinner can be absolutely anything. The most common shape of this toy is triangular, but the possibilities of imagination in this matter can be limitless. You can make the toy square, hexagonal or rectangular. It all depends only on your imagination. You can freely choose the material from which this device will be made. It is possible to make a spinner from plastic, metal, wood, and even paper and cardboard. Before you start making a toy with your own hands, you need to make a drawing and prepare the central bearing: you need to wash all the grease out of the bearing if it is new. To do this, you can use WD-40 or regular solvent. This is done so that it can rotate freely.
Wooden spinner
First, prepare a drawing. You can find it on the Internet or make it yourself.
Wash the grease out of the bearing using WD-40 or solvent.
To make a spinner you need wooden plank equal in thickness to the bearing.
Using a wood saw or hacksaw, we saw off the excess pieces of wood along the lines.
The last step in creating a wooden spinner is to sand the wood with sandpaper, insert the bearings and paint, making unique design toy. For painting you can use cans of paint, varnishes, and gouache.
Paper spinner
To begin, prepare four bearings (wash the grease out of one of them, as mentioned above), paper or cardboard, a drawing, stationery knife and glue.
Using a stationery knife, you need to cut out several shapes for the future toy according to the drawing. Next, glue all the shapes together and let the glue dry. Once the glue has dried, insert the bearings into the holes for them. We paint and give a unique design to the product.
You can clearly see how to make a paper spinner in the video:
Metal spinner
This is the easiest method to make this device at home. To do this, you need to prepare a central roller, glue, a compass and several metal parts. These could be nuts, screws, or even other bearings.
First you need to draw a compass smooth circle on paper and make marks at the same distance. Draw the lines as shown in the picture
Place the roller in the center, and metal parts along the lines and glue them to the bearing. There can be as many parts as you like, but if you make a spinner from bearings or nuts, then only three parts will fit. The main thing is that they are at the same distance. The central roller can be decorated with coins, carefully gluing them to the bearing, or other small round metal parts. This spinner can be painted using a can of spray paint.
Good day to all. In this article I will tell you how to do a simple toy spinner. Everything is done very simply, and most of the materials can be obtained completely free of charge.
For this we need:
- Cases 5.45 (I got mine at a combat shooting range, although you can find them at any training ground or order online).
- Bearing ABEC 5 (Ideally ABEC 7, was extracted from the wheel of an old skateboard, you can also find it in a car store or order it on AliExpress).
- Wooden block (Any hard wood, specifically in this case - walnut).
- Epoxy resin (To glue it all together is an ideal option).
Once everything is prepared, we begin production. By using step drill Drill a hole of the required diameter for the bearing.
We clamp the sleeves into the drill chuck and at low speeds, leaning the sandpaper against them, we begin to grind them until the paint is completely removed.
Remove the boots from the bearing, clean it by generously spraying with WD-40
Next, coat the edges of the bearing with epoxy resin, press it into a block, and only after that drill the side holes for the sleeves.
This is done so that the block does not burst, because in my case the walls turned out to be a bit thin.
In the end, I decided to put the drill aside and widen the holes using an engraver under required diameter. We glue the sleeves together (still the same epoxy resin), we also coat the holes in the block with epoxy and press the sleeves in. We leave it all to dry for 6 hours and in the end we enjoy a simple toy made by ourselves.
Let's make a spinner. Four bearings are required feather drill by 22 mm, a piece of plastic or any other material that can be processed. We draw an equilateral triangle with sides of 85 mm and mark all the holes. You'll have to make a little noise with the drill. Let's drill all the main holes for the bearing. Everything is extremely neat. It’s strange that the spinner only became popular Lately although it was invented in 93 by a chemical engineer. Available in another publication.
The master decided to make cutouts on the edges of the pinwheel.
Cut off the excess and paint it any color you like. The master chose black. The main bearing needs to be upgraded a bit by removing the plastic plug and cleaning out the sticky grease.
Take any container and fill it with acetone or another solvent. We immerse the bearing in the container and remove all excess grease.
The most interesting. Insert the ball bearing into the cutout. Super glue at the contact point, but not necessary. Same with the others. The spinner is ready.
Video of the “Engineering Chaos” channel.
More fidget models
Want to make a toy without a bearing? Here are a few more models for making at home in unpretentious conditions.
Do you want a fashionable anti-stress? Create a bright, unique spinner for yourself and your friends.
A toy in the shape of scarlet lips.
Let's see if it's possible to give some restlessness unusual shapes, and how it will rotate. Let's start with the template. We work on thick cardboard. You need two identical parts. Let's make our lips bright. Let's trace the template on red paper. Let's prepare two parts. You will need four circles. We pierce them in the middle and glue them together in two. Smooth the edges with a nail file or fine sandpaper.
Place a circle in the center of the lips and pierce holes. Glue two coins along the edges. A weighted spinner will spin better.
On top is a second cardboard piece. Now we attach the outer part. And on the other hand. Seal the edges. We pierce the central hole.
Let's add gloss with interesting technology. We apply special adhesive coating. To do this, press the cardboard onto the pad. Fill with transparent powder. In dry form it white. Shake off the excess. Heat with a hairdryer. The magic begins. Ordinary powerful hair dryer will also work, but it will take longer to seal the part. Under the influence of temperature, the powder melts and covers thin layer transparent glaze. This coating is not afraid of moisture. The cardboard turns out to be laminated and looks like thin plastic. To make the glaze stronger, apply a second layer in the same order. An amazingly beautiful technique that is easy to learn.
We widen the holes with a large nail. The central bearing is made from cardboard circles and toothpicks. We put it on both sides. It spins great. Fix with office glue. We remove unnecessary things. Protect the cut with a nail file.
Let's emphasize the contour of the lips. Dip the edges of the spinner in special glue. Sprinkle with gold glitter. Shaking it off. We heat it up. Paint the edges of the bearing with a black marker. Continuation on the video of the “Trum Trum” channel from the third minute.
Video on how to create a spinner.
If you look around, most likely you will see a person who is constantly spinning some kind of propeller in his fingers. This item is nothing more than a spinner or fidget - a kind of spinner, which consists of a bearing and a petal body.
The spinner was developed by Katherine Hettinger, who decided to create a useful exercise machine for her daughter with myasthenia gravis. At first, the woman made toys from adhesive tape and paper, and then began producing fidget spinners. Back in 1993, she received a patent for her invention, but no companies were interested in making it. The patent for this toy has long expired, so every second person in the world can produce it.
Spinners are far from being the same type; they vary in size, shape, color, and some can even glow in the dark. They vary in price; some models can cost several hundred dollars.
What is a spinner
What is a spinner, can tell Small child, and an adult respectable man in an expensive car. The spinner has no age restrictions, since its design is designed in such a way that it simply does not have sharp corners or the smallest details.
This device is a gyroscope that is incredibly stable in space. With its help, interesting tricks are performed that invariably attract the attention of people around.
Spinners are produced by a huge number of companies that are trying to surpass their competitors. They are trying to release the most unusual model, for which you won’t have to pay a tidy sum. It is worth noting that no company in the world has pre-emptive patent rights to produce spinners.
Playing a spinner is as safe as possible, since it does not require additional devices or any specialized places to play. The spinner never leads to injuries, it not only does not spoil the psyche, but also weakens obsessive states and autistic manifestations.
It is worth noting that this device operates exclusively on physical strength, it has no batteries or motor. The spinner is easily set in motion with a snap of the fingers. In order to start the propeller, you simply need to hold the axle between your middle and thumb, and start the blades with your index finger. In some cases, it is possible not to pick up the toy, but simply place it on the table, which greatly increases the speed and time of its rotation.
What is included in this device? The spinner consists of:
- covers - inserted into the middle of the bearing and helps to hold the entire structure;
- housing - the part that rotates around the bearing;
- bearing - the main part, which is a ring stuffed with metal balls.
Very great importance has a spinner rotation time, so the most expensive devices are based on high-quality bearings. Although the most cheap option will spin for about two minutes, and the most expensive spinners spin for more than ten minutes.
How to make the spinner spin longer without replacing the bearing? You just need to try to clean it of dust particles and debris that create friction and prevent the structure from rotating for a long time.
You need to clean the spinner using:
- acetone;
- brake fluid;
- thinners oil paints;
- isopropyl alcohol;
- dishwashing liquids;
- soap
In order to quickly dry the bearing of this spinner, it is recommended to use a hair dryer.
There are a huge number of spinners of various types:
- single - consists of one blade and a bearing, they are mobile and powerful because they can rotate for up to five minutes;
- three-spinner – is a trefoil clover, in the center of which there is a high-quality bearing;
- quad spinner - looks like a cross or a mill with four petals, however, it weighs quite a lot and cannot satisfy everyone with its size;
- wheel - this type speaks for itself because it looks like a cart wheel;
- exotic - a rather expensive option, since spinners are made of zirconium or tungsten and are shaped like weapons super heroes or even medieval instruments of torture;
- created using a 3D printer - they can be printed and assembled in about an hour, so they are in demand, and they are also quite cheap.
The spinner is rightfully best toy 2017, which invariably attracts attention and is a welcome gift for a special occasion.
When purchasing it, you should take into account factors such as aesthetics and vibration, ergonomic or rotational properties, durability and rarity, precision of processing and its quality. These relaxation toys are made from plastic, wood, and metals. different types, skin.
What is a spinner for?
It is not yet clear exactly why a spinner is needed. Some people use it as a toy, a finger trainer, or just a sedative. Agree that it is much more harmless to spin the propeller of a spinner while standing in a long traffic jam than to click a pen or bite your nails. And also this reliable means in order to focus on some information or task.
By the way, a spinner is a rather interesting simulator that can teach the basics of juggling.
So, what is a spinner and what is it for, and what benefits can the use of this kind of toys bring:
- will develop fine motor skills Hands;
- will help develop hands damaged during injuries or accidents;
- will remove stressful conditions and excitement;
- will help to relax while a person quits smoking;
- improves mood;
- will develop right hemisphere brain;
- will release the accumulated negative energy;
- will increase a person’s response to external stimuli;
- will speed up your thinking processes.
TO negative aspects This device may cause personal injury or the risk of swallowing balls from the bearing. In general, spinners are often declared to be a successful marketing project.
How to make a spinner without bearings at home
Having found out the cost of the option they like, many people begin to seriously think about how to make a spinner without bearings at home.
It will be quite possible to make a hand trainer without using expensive bearings. On the Internet it is quite possible to find drawings of such homemade spinners from scrap materials.
This spinner without bearings is made of paper, for this you should prepare:
- two sheets of thick A4 paper;
- ruler;
- compass;
- a simple pencil;
- toothpicks;
- glue for paper and for parts.
How to make a spinner without bearings for children
How to make a spinner without bearings for children can be found on our website. In order to make this kind of structure for kids, all the same elements are used as for an adult.
However, it is worth checking that all parts and related materials are, of course, environmentally friendly and safe. For example, for very young spinner users, you can use finger paints and environmentally friendly glue.
When making a design with and for a child, be sure to blunt the tip of the toothpick. Bearings are never used, since the baby can swallow balls from them.
How to make a spinner without bearings and caps
How to make a spinner without bearings and covers? Just try using cardboard and use glue stick caps for the template.
In order to make the main bearing, you need to use a hairpin, a toothpick, a rod from ballpoint pen.
You should use a compass and ruler to measure all dimensions as accurately as possible. Whether the measurements are taken correctly will depend not only on appearance, but also the properties of the spinner, including speed and rotation time.
How to make a spinner without paper bearings
Many young people ask questions about how to make a spinner without paper bearings.
- draw a rectangle 9X2 centimeters;
- draw diagonals to determine the center;
- fold this drawing several times;
- cut about eighteen rectangular parts;
- place two identical coins on their opposite edges;
- circle the coins, giving the edges a rounded appearance;
- glue all the cut out parts together with paper glue;
- to make it heavier, glue it to the edges of the coin with special glue for parts;
- measure 2 centimeters using a ruler and compass;
- draw and cut out eighteen circles that will become the central bearing;
- punch a point in the center that will be slightly larger than the diameter of the toothpick you are using;
- insert a toothpick into the center;
- put nine two-centimeter circles on it on both sides;
- carefully glue the joints of the toothpick and the mug, in no case without sealing the hole itself;
- let the future spinner dry and give it an aesthetic appearance with scissors;
- practice spinning the structure while softening the friction of the spinner;
- color this homemade product in your favorite colors or stick on your favorite logos.
How to make a spinner without bearings from caps
Many people are interested in how to make a spinner without bearings from caps. Of course, ideal option will be manufacturing homemade spinner using one or more bearings.
When using bearings, you should find the correct main element, wash off the grease from it and remove dust particles. If you make a spinner yourself without bearings from caps, then you won’t have to perform these actions.
You should prepare several caps from plastic bottles in advance, the best option will be the use of three pieces. They will need to be glued to each other on the sides using Moment glue.
In the middle you will need to drill a small hole into which the ballpoint pen will fit. It is worth cutting a three-centimeter piece from the empty rod, which is inserted into the hole.
Rotate this design it will be possible to hold it with two fingers.
How to make a spinner without bearings from Lego
To understand how to make a spinner without bearings from Lego, you should follow simple instructions. To assemble the structure you need to prepare:
- a flat and maximally long cube with holes;
- kernel;
- two limiters round shape with a cavity inside;
- several flat, round cubes for your fingers.
After all the parts of the future spinner are prepared, you should stretch the rod through the hole of the long cube, and then limit it on both sides.
Then you need to easily and quickly tighten the round platforms intended for the fingers. The side edges of the spinner should be balanced and positioned symmetrically. That's all, you can start relaxing with the help of a turntable.
How to make a spinner without bearings from coins
The Internet is replete with instructions and diagrams on how to make a spinner without bearings from coins. The most simple option will be the one when the simplest spinner is made from caps, on the inner or outside which coins are glued.
You can take coins worth five Russian rubles, and then make holes in them using a drill or soldering iron. Then you should insert three-centimeter pieces of a ballpoint pen into them.
How to make a spinner with your own hands from a plastic bottle
Another popular request on the Internet is how to make a spinner with your own hands from plastic bottle.
To do this, you should select a bright plastic bottle and cut a strip 10-11 millimeters wide from it. This is done in order to cover the bearings, which are 8 millimeters wide.
You should also take thick plywood, three nuts and three self-tapping screws for 19, as well as four washers. Make three holes in the plywood into which you need to insert a nut, a washer and tighten the self-tapping screw.
Bearings should be placed between them, aligning them as much as possible, and millimeter washers should be placed under them. The bearings should be pulled together from a plastic bottle and the structure should be heated with a hairdryer.
After drying, carefully tighten the structure, and then unscrew the nuts. In a few minutes it will be possible to use the spinner.
How to make a spinner with your own hands from wood
To understand how to make a spinner from wood with your own hands, you need to read the instructions or view educational video.
It is quite easy to make for those who have a little knowledge of a drill and a jigsaw. Must select the right wood, but novice spinner players can try to create a masterpiece from thick plywood.
You can come up with a drawing of the future spinner yourself or find it on the Internet. Then you need to attach your drawing to the plywood, trace it, and then cut it out using a jigsaw (preferably an electric one).
The workpiece should be cleaned using sandpaper, a hole is made in it with a jigsaw or drill, since then it turns out much smoother. A little trick for a novice craftsman: you should drill a hole halfway, then turn the plywood over and do the same with reverse side.
Do not forget that the thickness of the plywood should not be thicker than the width of the bearing. If the wood is thicker, it should be trimmed and sanded.
This spinner can be opened with varnish or oil, and also aged using a lighter.
How to make a spinner with your own hands in 5 minutes
How to make a spinner with your own hands in 5 minutes? You should use available materials, for example, bearings and different types of glue; leather, sequins, and beads are used for decoration.
The most original spinners that can be made with just five free minutes are made from cartridges bicycle chain, copper and even from an iPhone unnecessary for its owner.
Kids will quickly be able to create a beautiful and bright spinner from ordinary thick cardboard. Children and parents will have a great time constructing such a toy, and will also save cash for a good book or something useful. Schoolchildren can propose making such a product from cardboard during craft lessons, and the teacher will support this initiative.
It is also possible to create a spinner solely from bearings or not use them at all. In general, there are a lot of options, and what exactly your spinner will be will be determined by a flight of fancy.
How to make the spinner spin faster? You just need to remove excess grease from the spinner bearings. To do this you need to go through several steps:
- drip high-quality lubricant;
- change a bearing that has served for quite a long time;
- change plastic spinner to metal;
- place a high-quality plug on the structure that will protect it from dust, moisture and dirt;
- clean the spinner several times a week using a hair dryer or a can of compressed air;
- do not try to remove and clean the bearing on cheap models, this is simply unrealistic and not provided by the manufacturers.