How to cut a swan from a tire step by step. Tire swan: a master class for real men

If your child is tired of playing with his old toys and asks for a new one, you don’t have to immediately run to the store to please your baby. After all, there is a great toy that will keep him busy and help him develop his motor skills. Such a toy is slime - it is a jelly-like substance that can entertain both you and your child, and most importantly, you can make slime with your own hands at home from various materials. There are a huge number of ways to make it, and in this article we will tell you 10 ideas on how you can make slime with your own hands from scrap materials at home.

Slime without sodium tetraborate with detergent

If you don’t have time to run to the pharmacy, but you need to make a slime right now, then this manufacturing option is suitable for you. This version of slime appearance and to the touch it is as similar as possible to the purchased one. But since this slime contains detergent in its composition, you need to wash your hands after use.

You will need:

Dishwashing liquid
Mixing container
Hand cream
Dye

Progress:

First, mix dishwashing detergent and baking soda in a 1:2 ratio. Mix thoroughly.
Now add hand cream and mix. The amount of glue must be determined during the mixing process.
And add dye.
When all the ingredients are thoroughly mixed, the mass should have a slightly liquid consistency.
Place our not-quite-ready slime in a bag and put it in the refrigerator for 4 hours.
After the time has passed, take out the slime.

Nail polish slime

Another version of slime, which is made from ingredients that every housewife has. It turns out bright color and the shade practically does not change during the preparation of the slime. Let's see how to make such a bright and simple slime with your own hands.

You will need:

Colored nail polish
PVA glue
Mixing container
Sodium tetraborate

Progress:

First, we connect two components: glue and nail polish. Mix thoroughly.
Now add water room temperature in the proportion of 1 part glue and 1 part water. Mix.
Now you need to gradually add sodium tetraborate, stirring our mixture. We do not add immediately in order to see what consistency we get, softer or harder.
When you mix everything thoroughly, you will see that the slime itself forms into one mass. The slime is ready!

Slime made from titanium glue

The simplest slime can be made from ordinary titanium glue and water. It turns out plastic, but looks like a dense viscous mass. It is good to use for very young children, since its density does not allow it to tear under the slightest load. Now let's see how to make the simplest slime.

You will need:

Glue "Titan"
Paints
Mixing container

Progress:

Pour glue into a container and mix with dye.
Now add water to the mass in a ratio of approximately 1:1.
Stir the solution until our slime stops sticking to your hands.
Lizun is ready!
For clear example you can watch the video instructions.

Edible slime made from Nutella

If you want to please your child, it’s not just original toy, then you can make an edible slime. It is made from regular Nutella and marshmallows. But to do it you need a lot of patience. So, let's get started.

You will need:

Nutella pasta
Marshmallow marshmallow
Mixing container

Progress:

Calculate your portion by calculating the ingredients. For 1 tablespoon of Nutella you need 2 marshmallows.
We need to melt the marshmallows in the microwave, stirring, you will get a mass similar to shaving cream or foam.
Now mix the marshmallows with Nutella, mix thoroughly. It will take a long time to stir, but the result will please you. And the main thing is that such a toy can be eaten.

How to make edible slime

Another option edible slime- this is to make it from chewing candies mamba or frutela. This slime is not durable, as it hardens when it cools. But you can eat it and it has a pleasant aroma.

You will need:

Frutela or mamba candies
Powdered sugar
Water bath

Progress:

Remove all the candy from the packaging.
Place in a container and place in a water bath. Melt all the candies while stirring.
When the mixture has cooled slightly, transfer it to a container in which you previously poured powdered sugar.
Roll the mixture in powder until our slime stops sticking to your hands.
Now you can give your child our edible toy.

Video on how to make slime from frutela

Jumping slime

If you want to make not just a slime, but also a jumper. This slime is very interesting to play with, and the ingredients included in it are found in almost every home. Let's see Full description with step-by-step instructions.

You will need:

Silicate glue
Sodium tetraborate
Dye
Glitter

Progress:

Pour glue and a little dye and glitter into the container.
Next, add sodium tetraborate and mix thoroughly until our mass thickens.
Now you can try your slime.

Transparent slime

If you don’t have any dyes on hand, or you just want to make a transparent slime, then this recipe is for you. It can be made very simply and quickly, so let's start making slime with our own hands.

You will need:

Silicate glue 125 ml.
Water 250 ml.
Sodium tetraborate

Progress:

Pour glue and water into a bowl and mix thoroughly.
Dissolve sodium tetraborate in 125 ml. water and pour into the mixture with glue.
Mix the mixture thoroughly until the mass curdles and a slime forms.
Now you can give it to your child or play with this entertaining toy yourself.

Magnetic slime

If you need an unusual slime, then you can make it magnetic. To do this you will need regular iron filings and a magnet. So let's get started with the process of making our slime.

You will need:

PVA glue
Boric acid
Iron filings
Magnet

Progress:

Mix the glue boric acid and iron filings.
Stir for a long time until the consistency becomes similar to slime.
Now you can play with this slime using a magnet.

Slime without sodium tetraborate

I would like to offer you another option for making slime without the use of sodium tetraborate. This recipe uses only 3 ingredients, and one of them is ordinary dye. Let's see how to make slime with your own hands.

Lizun is a kind of chewing gum for hands (hand gum), which is now experiencing the second peak of its popularity. This toy has the ability to take any shape, it can be twisted and crushed, tossed and deformed, glued to different surfaces and peel them off without any effort, you can even glue some parts together (only for a short while) with its help.

Slime has the consistency of jelly, but it is not able to melt. The toy helps develop fine motor skills, relieve stress and calm nervous system generally.

You can buy handgams at a toy store; all models are almost identical in appearance. However, their quality can vary quite a bit. Often, cheap Chinese slimes are made from low-quality and sometimes downright harmful substances. That is why parents who care about the safety of their children most often create such toys themselves. Moreover, the ingredients necessary for this can be found in every home.

How to make slime from liquid silicate glue

Silicate glue is a common material from which most handgams are made. Make slime with my own hands you can do this:

mix in a separate container one part of glue (silicate or office glue, for example, PVA) and one part of medical alcohol;
add a little coloring to this consistency (food coloring is suitable for this purpose, which is absolutely safe for children’s hands);
after all the ingredients are mixed, you need to keep this mixture under running water ice water, waiting for the slime to harden.

This method of creating sticky toys does not require high costs materials and time, but it is used quite rarely, due to the fact that the recipe uses alcohol.

How to make “glass” or transparent slime

You can create a glass slime that is absolutely transparent without special effort. To do this, you need to prepare sodium tetraborate (the well-known borax) and ordinary liquid transparent glue (silicate).

The process of creating a transparent handgam looks like this:

in a glass container, mix one part of glue and sodium tetraborate;
mix the composition thoroughly using a plastic spatula;
After a minute, the glass slime will be ready.

Making slime from water

Making a slime “like in a store” is quite easy; all you need is PVA glue (office glue), water and a little time.

Technology for creating water slime:

pour 50 ml of slightly warm water into a glass bowl clean water and 100 gr. PVA glue (it is important that its expiration date does not expire);
the mixture must be thoroughly stirred; if it turns out to be runny, you need to add a certain amount of glue;
now you need to pour 1 bottle of sodium tetraborate (4% solution) into this composition;
if you purchased borax, which is in a powdery state, it must be diluted with water (in the proportion of 1 tablespoon per 0.5 cup of water);
it is important to monitor the amount of borax and not to exceed its amount, otherwise the slime will be too hard and less flexible;
in conclusion, any dye must be added to the composition; it can be either food-grade or a regular solution of brilliant green.

Upon completion of the process of creating slime, it must be placed in plastic bag and knead thoroughly. Important! After playing with such handgams, you must wash your hands.

How to make slime from soda

Some believe that tetraborate is not needed in children's toys, and have resorted to creating borax-free slimes. It is an excellent substitute for ordinary baking soda. Moreover, from soda you can make both a beautiful transparent slime and a multi-colored slime (if you add dye).

Creating such a handgam is simple:

first you need to dilute 100 ml of glue in 50 ml of water;
with help wooden stick add a little dye to this liquid;
the composition must be stirred until all ingredients are completely dissolved and combined;
Now you need to mix 150 grams. soda and 15 ml of water;
add this mixture to the color composition;
Now you need to transfer the mass into a plastic bag, shake and knead thoroughly - from these manipulations the slime will gradually thicken and become elastic.

Just a minute of exposure and your own handgam is ready! Note! This slime should only be stored in a closed jar or bag, otherwise it will dry out and lose its elasticity.

Making slime from plasticine

It’s very easy to create homemade slime from plasticine, which is found in every child’s room.

It is prepared like this:

The handgam making process is quite dynamic, so you need to prepare everything in advance necessary ingredients: plasticine (a strip of standard set or 100 gr.); food gelatin– 15–20 g; glass of water; container - glass or plastic for mixing all parts and metal for heating gelatin; spatula for stirring the slime.
Gelatin should be filled with water in a metal bowl and allowed to swell for 1 hour.
Now you need to heat the swollen gelatin over low heat, without bringing it to a boil.
Separately, knead the plasticine until it becomes very soft and absorbs body heat.
In a plastic bowl, pour 50 ml of hot water into the mashed plasticine and mix this mixture thoroughly with a spatula.
Now all that remains is to thoroughly mix the slightly cooled gelatin and plasticine mixed with water.
Finally, the slime should be put in the refrigerator and left there for half an hour, after which you can play with it.

How to make slime from shampoo

Very interesting recipe Making slime involves using shampoo, which is sure to be found in every apartment. There are several options for creating such a handgam:

Stir in plastic container the same amount of hair shampoo, soda and water. You can add any dye or leave the slime snow-white. It should be stored in a plastic bag.
You can combine shampoo and water with flour to get a thicker toy consistency. Important: mix the composition for warm water, and add the dye before the flour.
Often, starch is used instead of flour, which allows you to sculpt beautiful sticky crocodiles or create your own dolphin.

Note! Slimes that contain flour turn out to be quite sticky and have an unpleasant ability to leave greasy spots on light-colored wallpaper, which is not easy to clean.

How to make slime from liquid laundry detergent

Young inventors came up with the idea of using liquid laundry detergent to make slime. Moreover, ordinary washing powder or dishwashing liquid, in this case they will not have the desired effect, and it is unlikely that you will get a high-quality slime.

To create such a handgam you need:

mix ¼ part of a standard tube of PVA glue with food coloring in a container;
achieve uniform consistency and color by thoroughly mixing;
add no more than 2 tbsp to this composition. l. liquid laundry detergent;
stir the resulting mixture;
if the composition is very thick, you need to slowly, literally drop by drop, add liquid washing powder to it until it reaches the desired consistency;
Now you need to carefully knead the entire composition for 5–10 minutes (it is better to put on latex gloves);
The finished slime is stored only in a container that is hermetically sealed.

If some of its properties are lost over time, you can put the handgam in the refrigerator for a while.

How to make magnetic slime with your own hands

It is very interesting to play with slime, which tends to be attracted to a magnet. To do this you need to do the following:

Mix a glass of water and half a teaspoon each of borax and glycerin in a bowl until smooth.
Separately, you need to mix 150 ml of water and 30 g. glue, gradually adding a small amount of dye to them. You can make your handgam glow; to do this, at this stage you need to add a small amount of phosphorus paint to it.
Now you need to mix both mixtures, gradually adding one to the other. It is important to carry out this process slowly; as soon as the desired density of the composition is achieved, tetraborate will no longer need to be poured.
Afterwards, you need to carefully roll out a layer of slime on a flat surface and pour a certain amount of iron oxide into the middle.
Now the composition is kneaded again until a uniform shade is obtained.

Method for making slime from flour

Slime containing flour is considered quite safe for children. However, in any case, you need to supervise children's games, because even the safest composition can cause choking.

You can make slime from flour like this:

sift 2 cups of flour through a sieve;
add ¼ part ice water to flour;
now pour ¼ of the hot water into the container;
the mixture must be mixed well, allowing the flour to glue everything together so that there is not a single lump in it;
finally pour in a little food coloring and stir the composition again;
Finally, the slime is left in the refrigerator for 2 hours until it cools completely.

Nail polish slime

Very interesting Velcro is made from nail polish; preparing them is not too difficult:

Pour any nail polish into a glass container.
Add a little to it vegetable oil, mix everything thoroughly and for a long time.
Now, using rubber gloves, you need to remove the dye from the container, which, thanks to the oil, has accumulated in the middle. You need to gently knead it with your hands.
Lizun is ready. You can put it in the refrigerator for half an hour to increase elasticity.

The main disadvantage of such handgam is bad smell acetone, which is inherent in every nail polish. Therefore, it is unlikely to be suitable for small children to play with.

How to make edible slime from Nutella

Every child will definitely enjoy this toy. It can be made quickly and easily. To do this you need:

melt 100 gr. in a water bath. marshmallows or chewing marshmallows;
the melted mass will be sticky and viscous;
Now you need to add Nutella chocolate spread to this mass, it is better to do this gradually, in small portions;
when the composition is slightly mixed, you need to pick it up and knead it for 5 minutes, achieving uniformity in color and consistency.

You can play with this slime a little, and then, with no less pleasure, enjoy it with tea.

How to wash slime

This toy is quite sticky in consistency, so it is not surprising that everything, including dirt, quickly sticks to it. Playing with such a handgam becomes simply unpleasant and uninteresting, because once it collects garbage, it simply stops sticking and stretching well. This problem can be corrected by washing the Velcro; in addition, you need to clean it properly:

You can rinse it in a container of water and put it in a closed bowl in the refrigerator for a while.
Often a syringe is used, into which you need to draw the slime and slowly squeeze it out. All debris, at the same time, collects in the nose of the syringe.

A handmade handmade item becomes truly dear to a child, and keeping it safe becomes a top priority. In order for the toy to please your baby for as long as possible, you need to adhere to the following rules:

Store slime only in closed containers or tetra bags to prevent it from drying out and getting in dust.
You should not use soap to wash the toy.
Handgams should not be left near heating devices(batteries, solar window sills).
A child should not leave a toy on surfaces that have pile (carpets, rugs, fur), otherwise he will certainly collect its particles on himself.
If the slime no longer stretches well, you can add a few drops of vinegar or a little glycerin to it.

Slime is a universal toy that can be easily made with your own hands at home. It will allow the child not only to have a great time, but also to develop fine motor skills hands, which is very important for a growing person.

Not really

If you are wondering how to make slime without sodium tetraborate, then this article is for you. Slime is a viscous, slippery mass that changes shape and stretches, but does not stick to your hands. What makes the toy even more popular is the fact that you can easily make it yourself. This process gives unlimited freedom for creativity. You yourself choose the color of the toy, its consistency and decide whether it should contain fillers: beads, sparkles, etc.

Below we will tell you how to make slime at home without sodium tetraborate.

Mix with baking soda

Option No. 1 (baking soda, thick glue and foam)

You will need: one container (125 ml) of PVA glue, a can of shaving foam and baking soda.

Let's start making slime with our own hands. Mix the first two ingredients. You will end up with a liquid that is similar in thickness to cake cream. If you want, you can paint it. Then add soda in small pinches, actively stirring the mixture and bringing it to the desired consistency.

Please note that the mass will not set immediately. Therefore, after adding a pinch of powder, stir for about three minutes and only then add a new portion of soda. Do not overdo it with this component, otherwise you will ruin the toy.

Option No. 2 (Soda and “Fairies”)

Here we will tell you how to make slime at home from soda, Fairy (50 ml) and dye.

This recipe is extremely simple to make. Pour half a glass of hot water and dissolve two teaspoons of soda powder in it. Let the liquid cool.

Pour “Fairy” into the bowl and gradually pour it there soda solution. If you overdo it with the thickener, just add a small amount of dish soap to the mixture.

Theoretically, it is permissible to use dry soda in this method. But in this case, the chewing gum for your hands will be denser and not so pleasant to the touch. “Fairy” can be replaced with any similar product.

Option number 3 (soda, glue and water)

To make this slime with your own hands, without using sodium tetraborate, you will need: a soda solution as in the previous recipe, dye and a bottle of PVA glue (can be replaced with silicate).

Pour the glue into a container, tint it (if desired) and add a soda solution (a teaspoon) to thicken the mass, stirring it constantly. Thus, achieve the desired density of the toy.

From gel for washing machines

Liquid detergents are great for thickening the mass when making slimes. Pervol and Persil are best suited. However, if you have another gel at home, try using it as a thickener. It's likely that it will work great.

To find out how to make a jelly toy with stain remover gel, read the recipe carefully.

For slime you will need: 125 ml of glue, 2 teaspoons of washing liquid (if it is in capsules, then take 2 pieces).

Pour glue into a deep bowl, add washing gel and, if desired, dye and mix thoroughly with a whisk or mixer.

When the slime becomes tight enough, start working with your hands. If you miss this moment and bring it to readiness with a whisk or mixer attachments, then it will be extremely difficult to remove it from them. Half of the toy may remain on the devices.

Thicken with flour or starch

Life hacks for slimers

Please note that most slimes made from improvised materials without the use of sodium tetraborate have a rather short shelf life (from 3 to 7 days). But even this time is quite enough to play with the new slime.

Please also note that hand gum thickened without sodium tetraborate is less dense and rubberized, so store it in the refrigerator in a closed container.

If you liked the methods of making chewing gum for hands without sodium tetraborate described in the article, then like and repost.

Write your favorite recipes in the comments.

Do you know who ghost hunters are? If not, we highly recommend watching the cartoon of the same name, which was incredibly popular in the mid-90s. What was especially memorable about this cartoon was the funny logo, the catchy intro melody and two otherworldly characters – the ghosts Boogeyman and Lizun. We won’t touch the boogeyman today, but let’s try to figure out how to make slime at home.

The legendary animated series “Ghostbusters” was released in the mid-90s and immediately gained wild popularity. At the same time, a stream of simple toys poured onto Russian shelves, named after one of the heroes - the scary, but kind and terribly charming ghost Lizun. This green miracle ate everything and everywhere left a liquid, slippery trail, into which everyone around them endlessly fell into.

The slime toy is very similar to its cartoon prototype; in fact, it is a slime, a viscous lump with the properties of a Newtonian fluid, elastic, sticky and stretchy. Mattel began producing this toy back in 1976, but it gained mass popularity precisely after the release of “Hunters.”

The slimes of that time were made from guar gum with the addition of borax powder (in chemical language - sodium tetraborate), mainly had green color and were absolutely safe for children. Unfortunately, we can't say the same about timely toys. The quality of their components raises big questions. Therefore, we suggest you figure out how you can make slime yourself at home.

Basic manufacturing methods

There are a lot of basic and not so simple ways to make slime yourself, at home. The choice of recipe depends on your imagination, the availability of free time and the means at hand.

Plasticine toy

To make handgam from plasticine we will need the following materials:

plasticine - about 100 g, any color;
– 1 pack;
cold and hot water;
plastic and metal cups.

The cooking method is quite simple.

Dissolve gelatin in cold water, we use metal utensils for this.
After an hour, place the dishes on the stove to heat until high temperature, but there is no need to bring it to a boil.
Meanwhile in a plastic cup pour hot water, put a piece of plasticine there and mix it thoroughly in the water.
Slowly pour gelatin into the resulting mixture, mix until smooth and put in the refrigerator.
We put it in the refrigerator, wait a couple of hours - and you can play!

This toy is safe and environmentally friendly, but it gets your hands dirty and doesn’t last long.

Starch slime

You can make a toy at home without plasticine. In this recipe we will need corn starch - it will make the toy nicer and more elastic. But if you don’t have corn, you can also use potato. The recipe is quite simple.

The following ingredients are required:

starch;
water;
food coloring. You can show your imagination - sparkles and even small rhinestones will make the toy simply cosmic.

Combine starch and water in equal proportions, place in the refrigerator, and in a couple of hours your slime is ready! When cooking, you can add a drop of perfume or essential oil- the toy will smell delicious. And if you add a little phosphor paint, the toy can glow in the dark.

The advantages of this method are simplicity, environmental friendliness and the opportunity to show imagination. Disadvantages - again, a very short shelf life, only about a week.

Handgam made from shampoo and glue

This method is more complicated, but the slime turns out to be more similar to its store-bought relative.

We will need:

shampoo without adding - 3 tablespoons (50 ml);
polymer glue – 3 tablespoons (50 ml);
food coloring, sparkles, sequins, rhinestones - optional;
plastic container.

The cooking method is as follows.

Pour shampoo into a container, add dye and glitter, mix thoroughly.
Slowly pour in the glue, stirring constantly until the consistency is uniform.
Store the received toy in a dark, dry, cool place.

Instead of polymer glue, you can use PVA, but such a toy has worse stretch and sticks strongly to your hands.

Slime made from PVA, water and sodium tetraborate

If the previous toys can be made at home with the child, then in this method it is better to refuse the child’s presence.

Components:

sodium tetraborate (borax solution) – 1/3 teaspoon. Try to purchase a solution of borax in glycerin;
PVA glue, preferably in a bottle, 1 pc. Can be replaced with transparent stationery;
cold water – 200 ml;
food coloring, glitter, etc.

Manufacturing takes place according to a standard scheme.

Mix glue and water in a plastic bowl and mix thoroughly.
Add dyes.
Slowly and carefully add sodium tetraborate. The more borax, the “thicker” the slime.

When making slime in this way, be sure to use protective equipment: gloves, an apron, unnecessary clothes. The finished toy should be stored in a closed container, away from air and light. Sodium tetraborate has a big advantage - it is an antiseptic by nature.

Soda slime

Another way to make a toy yourself from simple available materials.

In this recipe we will need:

soda – 1 tablespoon;
PVA glue – 100 or 200 ml;
a glass of cold water;
food coloring, rhinestones, glitter, etc.;
plastic dishes.

The stages of “production” are as follows.

Dissolve soda in water (1 tablespoon per 1/2 cup).
Mix the glue with the dye until the color is uniform.
Pour soda into the resulting mass.
Mix thoroughly.

We store the toy in the same way as in the previous method - in a dark, dry place.

Toy made from liquid washing powder

This recipe requires liquid laundry detergent—dry detergent or dishwashing detergent will not work.

Ingredients:

liquid washing powder - 2 tbsp. spoons;
PVA glue – 1/3 tube;
dye;
plastic dishes.

Mix PVA glue with dye to obtain a homogeneous color mass. Slowly pour in the liquid detergent drop by drop until the desired consistency is achieved. Knead for 5-10 minutes (wear gloves!). Store in a sealed container.

Slime made from sodium tetraborate and alcohol

This recipe also uses sodium tetraborate, but without PVA glue.

We will need:

sodium tetraborate (dry borax) – 2 tbsp. spoons (sold at the pharmacy);
a glass of cold water;
polyvinyl alcohol in powder form (ask at the Antimelitel hardware or hardware store);
metal (not plastic!) dishes;
dye.

The manufacturing stages are as follows.

Dissolve alcohol in a glass of water.
Place the bowl with this solution on the stove and heat slowly, stirring. Heating time is approximately 40 minutes.
Turn off the heat and let the solution cool to room temperature.
Add borax and stir.
Add dye.

Handgam according to this recipe will be elastic, not unpleasantly sticky and very similar to store-bought.

If you make a toy using any of the above methods and add pieces of metal to it, you will get an amazing magnetic slime.

To avoid crushing an iron part with a file, try to find iron oxide in the store or order a special developer powder from office equipment supply stores.

By mixing the powder with metal particles, we get an unusual magnetic slime that changes shape under the influence of a magnet. And if you add phosphor paint to the toy, the slime will glow in the dark.

Other recipes

The technology for making toys in all recipes is approximately the same.

We looked at the most popular and accessible examples of how to make slime at home.

In addition to the above, there are ways to make toys from soda without using glue - from flour and “Fairy”.

How to make slime from "Fairy"?

"Fairy" or other dishwashing detergent;
soda;
moisturizing hand cream;
dyes.

Mix half a tablespoon detergent with a teaspoon of soda, mix thoroughly until smooth, add hand cream and dye. Place the resulting mass to cool for 3-4 hours.

If the slime making process doesn't work out, don't be discouraged. Experiment with the ingredients. To increase viscosity, add more binder; to thin, add water.
Wear gloves.
If your child is still small, do not leave him with the toy unattended - children put everything in their mouth, and slime is very attractive in this regard.
Try to persuade your child not to throw a toy at walls covered with wallpaper if you are not going to do any repairs in the near future.
If the toy has dried out, it doesn’t matter; it can be briefly revived by moistening it with water.

How to store slime?

A toy made with your own hands at home, unfortunately, is short-lived. Proper storage will extend the life of your favorite entertainment.

Store the slime in a closed container, preferably without access to air. It will be ideal if the place is also dark and cool. The best place for storage - refrigerator (but not freezer).

Conclusion

Nowadays, bright, cheap and not very, often unsafe toys overflow stores. Unfortunately, you won’t be able to make a Barbie doll or a car yourself, and not every adult can sew a teddy bear.

But it’s quite possible to create a simple but fun toy yourself from scrap materials. Therefore, the question of how to make slime yourself is quite relevant.

Show your imagination, experiment, put aside your children's electronic gadget and involve your child in the process - you are guaranteed a lot of positive emotions!

Mother of two children. I'm leading household for more than 7 years - this is my main job. I like to experiment, I try all the time various means, ways, techniques that can make our lives easier, more modern, richer. I love my family.