Do-it-yourself ice slide at the dacha. How to build a snow slide

Many will agree that it is impossible to imagine winter without snowdrifts and ice slides. Of course, for about three months during the winter you can think about making a snow slide. Moreover, all work can be done with your own hands without outside help. Such a structure will be a real joy for your kids. But it will also please adults. Moreover, all work can be completed quickly and without much difficulty.

The easiest way to have a beautiful front lawn
Of course you saw perfect lawn in the cinema, on the alley, and perhaps on the neighbor’s lawn. Those who have ever tried to grow a green area on their site will no doubt say that it is a huge amount of work. The lawn requires careful planting, care, fertilization, and watering. However, only inexperienced gardeners think this way; professionals have long known about the innovative product - liquid lawn AquaGrazz.

In order to successfully build a snow slide, we will need:

a lot of snow;
a pair of shovels;
much water.

All are listed here necessary tools for the construction of our slide.

Choosing a place for a slide

First, every summer resident must take care of choosing a place where the slide can be located in the future. We choose a location based on maximum safety for children, that is, the structure should be located at a great distance from the roadway.

Then we check this area for spaciousness so that children can easily approach the slides. In addition, the larger the slide and the better the ice on it, the more open area will be required. Only in this case will children be able to ride the slide freely.

Determining the height and length of the slide

In the marked area you need to make a huge snow mountain, for this we throw shovels a large number of snow. It follows that we choose the height and width based on your strengths. We make it as high as possible, but within reasonable limits. However, if you want to make a children’s slide, then you don’t need to get too carried away: in this option, we proceed from our convenience and the safety of the kids. It is clear that we carry out all the work in winter, when the temperature outside is sub-zero.

The photo shows a slide with steps

Regarding the length, fans of this Russian fun for the winter advise making a slide no less than 5 m long; you can make a little more. However, keep in mind that you should not make a very long snow slide for children.

Shape and angle of the slide

Another important point When preparing a slide, it’s a matter of choosing its shape. There is no need to opt for an ordinary slide, that is, a classic form. You have the opportunity to make it with many turns in different sides. For example, such a slide can be seen on bobsleigh tracks. Or a slide with an arch is another current option. You can also try your own skills in making snow sculptures; you can make not just a skating rink, but fairy tale hero or a mythical figure.

The tilt angle also has important. There is no need to do a very steep or, conversely, gentle option for children. The most acceptable angle of inclination should be at least 30, but not more than 50 degrees, and then the angle must be reduced over time. That is, the slide needs to be made flat. Well, for small children it is better to make a gentle slope out of snow with your own hands at the beginning of work.

Are steps necessary? Of course, if you are making a slope for young children. You may want to refrain from making steps if your children are over 5 years old. And where exactly - definitely from the highest area of the hill.

Don’t forget about making sides on the sides of the steps, approximately 30 centimeters high. Also keep in mind that you can make small sides along the edges of the slope so that the kids don’t fly off the slope when skating.

Stages of pouring a slide with your own hands

For the work, we first take buckets with cool water or a hose, go up the steps to our slope and start pouring - don’t rush, we do all the work carefully so that the entire structure is not damaged. When pouring, you need to level the surface of our slope - only in this way can you get a perfectly flat surface. Areas where holes have appeared from the liquid must be densely filled with snow and watered again.

Find out how you can make a snow slide yourself in winter, how to properly fill it with water so that it freezes.

Agree that in new year holidays One of the best, most memorable childhood memories is winter festivities. Making a snowman, sledding, skiing, and, of course, on the slides is a wonderful activity. The latter will be discussed in this article.

You will learn how to build a slide without difficulties at home, without any outside help. This slide will bring great joy to your children and even adults, and to make the work less boring, you can involve the whole family in it.

How to make a snow slide for children with your own hands?

It often happens that some problems occur during the construction of a slide. It collapses, falls apart, and pits and irregularities appear in the most inappropriate places. Next, you will learn how to make a slide correctly. So that it is durable, reliable, and most importantly, comfortable.

Materials for building a slide

To build successfully you will need the following:

Frost outside the window
A large amount of pure snow
Shovel
Broom
Quite a decent amount of water
Watering can, ladle
Positive attitude
Scraper or spatula

An example of building a slide for collective use

To build a slide, you need to follow a few simple rules:

Safety. Choose a safe location future design. This is necessary so that your child does not get hurt during the descent, so that there is no tree, fence, road, bushes or other obstacles on the way. You should not create an object of entertainment under the roofs of old houses, from which an icicle, slate, brick, etc. may fall.

Slide height, tilt angle. Determine the height of the future slide based on the age of the children. For very young children, up to about three years old, a slide one meter high is enough. For older children, the most optimal, safe height is two to four meters. You should also adhere to correct angle tilt, such that it is no more than forty degrees.

Pure snow. When building a slide you need to use pure material. Because your child may smear things. Try to prevent children from getting hurt. The problem arises if there is debris, branches, sticks, etc. in the snow.

The procedure for creating an ice slide:

Once the location and size are determined, we begin work. Using shovels you need to sketch required quantity snow. For example, a meter-long slide can be built in about thirty minutes. It is advisable to make the foundation of your snow slide using rolled large balls of snow. This way you will already have the base of the slide created.
Next, we proceed to the formation of our slide. Using a spatula or broom, give it the required form. Let's do optimal angle slope of the slide, straighten the area of descent of the snow slide.

The base of the formed snow slide

If the slide is high, make steps using a spatula (scraper) or shovel. To make the steps stronger, strengthen them with your feet so that the snow settles, and only then form them auxiliary tool. They should be comfortable and small so that children can easily climb up.

An example of making snow steps

IMPORTANT: The acceptable width of the step is at least twenty-nine centimeters.

Don't forget about the sides. Their height should be approximately ten to thirty centimeters, depending on the age of the child. The sides can be made using a shovel. Also, in order to give them shape it is necessary to use handmade. During it, do not forget to wear gloves as protection from the cold.

If you have the desire and time, then add decor. Decorate the slide with snowmen, various figures, and paint it with patterns. Or do everything to your liking, a lot depends on your imagination.

How to properly fill a snow slide with water?

We have come to the most difficult final stage - filling the ice slide with water. The slide must be filled in several stages - at least three times. Use cool water using a spray bottle, watering can, or ladle.

What needs to be done to ensure that the descent on the hill is uniform?

You will need a broom; with it you spray an even layer of water over the entire surface of the structure. Make sure there are no irregularities, holes, or bumps. To do this, during pouring, you need to smack the set thin, fragile layer of ice with a broom. After the second stage, you have a rough crust of ice. For a more reliable result, fill the slide a third time, after which you will get a strong, smooth, and most importantly, reliable structure.

IMPORTANT: Fill finished design stands at a low temperature, from 10 degrees below zero. Otherwise, your efforts will be completely useless.

If you follow the entire sequence of work, you will get an excellent snow slide, which your children will be very happy with. If the winter turns out to be frosty, then the item of entertainment will last until the spring thaw.

Video: DIY snow slide

Skiing down the mountain is a favorite pastime for children of all ages, and only adults can provide them with convenience and comfort in this activity, and they will have more than enough fun and enthusiasm. A slide can be built from a variety of available materials, and which ones will be discussed in this article.

What do you need for a slide?

In order to make a slide with your own hands, you can use metal, plastic, wood, as well as scrap materials left over from an old cabinet and desk. With even a little imagination, you can build a real miracle from them and place them in the corner of the children's room to the delight of your baby.

You can make a slide for your child from an old desk.

For this you will need:

varnished cabinet door;
plywood sheet;
small boards, which can be pieces of a shovel handle, legs from a table or chair.

Manufacturing stages:

Making a snow slide

Making a mountain out of snow with your own hands is very simple. The main thing is to wait until the temperature outside approaches about 0 ᵒC. And, of course, it is important to have enough snow.

You will also need:

shovel made of metal or plastic;
construction spatula, scraper;
bucket or watering can;
warm mittens.

Manufacturing stages:

The primary task is to determine the location of such a homemade attraction. To minimize injury, you should mandatory ensure that you roll out onto a level area so that
the child could roll evenly until it came to a complete stop.
The height of the slide is determined based on the age of the skaters. For children under 3 years old, a rise of 1 meter in height will be enough, and for older children you can build a higher slope, the main thing is that the slope does not exceed 40 degrees.
Roll several large balls and form them into the foundation of a future building. If you plan to make a fairly high slide, then you should think about how the children will climb it. The problem can be solved by making the same snowballs that can be laid at the foot in the form of steps.
Use a spatula and scrapers to level the surface of the steps and leave the structure until cold weather sets in.
The slide should be filled in cold weather. It is not recommended to use buckets or a hose for this, as there is a high risk of large holes forming. It's better to use regular garden watering can or the one that housewives use for watering indoor plants.
Using a piece of plywood or a shovel with a wide working part, slowly pour water onto the structure. Or you can cover the raised area with a large piece of fabric and pour through it - this will help the liquid to be distributed more evenly over the snow.
If you don’t have anything at hand except a bucket, then you need to mix the water in it with snow and cover the surface with this very slurry, leave it to freeze overnight, and repeat the procedure in the morning.
That's it, the slide is ready. If necessary, potholes can be smoothed out with a spatula.

Do children's activities seem unsafe to you? Are you afraid that your child might get injured while looking for adventure? The best way out of the situation is not to ban, but to provide a safe place for games! Moreover, making a children's slide with your own hands is not so difficult. For this you will need a minimum of material, construction tool and a little imagination. A practical advice on construction, design drawings and recommendations regarding the choice of building materials can be found below.

What you need to know to build a children's slide

The proverb about the need to measure several times before cutting is especially relevant when building a play complex for a child. After all, mistakes in this matter are unforgivable!

Playground slide with swings

Five golden rules for a play slide

A children's slide must first of all be safe and comfortable:

The descent must necessarily have a “brake pad” - a section where the ramp is parallel to the surface of the pad. Otherwise, the speed of descent will not decrease, which may lead to injury to the child.
The length of a self-made children's slide should be exactly twice the height of the structure. So, if the length of the ramp is 5 m, the height of the launch pad cannot be more than 2.5 m.
There should be no buildings or fences within a radius of 1 m near the descent area. This is necessary so that the child cannot hit himself if he accelerates too much.
It is necessary to provide a special covering in the descent area (sand, rubber mats, etc.). There shouldn't be a swamp there in rainy weather!
If a sandbox or hammock will be placed under the structure, you need to sew up the “ceiling” in advance and make a roof over the launch pad (to drain water). Otherwise, sand from children's feet will fall onto the heads of those located below.

How to choose material for a slope

The choice of materials for covering the descent is not that great. And, taking into account the requirements that ensure the safety of the child, it is completely narrowed down to several options. But, before listing the features of these materials, let’s look at what you cannot use to make a children’s slide with your own hands:

Polycarbonate (especially cellular). This material, firstly, does not glide well, and secondly, when broken, it forms dangerous chips. In addition, in summer, polycarbonate expands, creating waves. Therefore the slide in hot weather will quickly become unusable.
PVC panels. A very fragile material that cannot withstand harsh winters.
Glass mats. Strictly not recommended for contact with the skin of a child.

Winter slide from monolithic polycarbonate

How to achieve a “mirror” wood surface

Building a wooden children's slide with your own hands is a reality! But only if you are ready to devote several days to making a slippery wooden ramp. After all, in order to apply several layers of yacht varnish and sand the surface in between applications, it will take a lot of time.

Why is a wooden slide attractive?

Pros of a wooden slide:

The child will be surrounded by environmentally friendly, natural materials.
The surface will not heat up as much in the heat as, for example, metal.
In winter, a wooden slope can be filled with water and turned into an ice slide.

Disadvantages of a slope made of wood:

If there is sand on the site, then varnished surface It will become unusable very quickly. Children will bring sand on their clothes and scratch the slope with it, as if sandpaper. So be prepared to renew your coverage annually!
The slightest oversight while sanding the surface can result in splinters and scratches for the baby after skating.
Sliding speed wooden surface in any case, it will be low, which will quickly make a wooden slide uninteresting for growing children.
IN summer time it will be impossible to convert the slide into a water park, that is, to supply water to the slope.

A selection of drawings of a wooden children's slide for making with your own hands:

A simple drawing of a wooden slide

Low descent for small children

Play complex with slide

Simple model

Advice! Instead of wood, it is better to use Finnish plywood to cover the slope of the slide. It is much more moisture resistant and perfectly withstands the effects of precipitation.

Secrets of slippery surfaces

A few secrets on how to make a wooden children's slide truly slippery:

A wooden slope (dry and sanded) can be coated with a special oil that protects the surface (for example, Pinotex). This must be done in several layers. Thanks to this procedure, the wood will not lose its smoothness, and moisture will roll off well without destroying the surface.
Sanding the wood layer by layer after each application of varnish will help achieve the effect. mirror surface and make the slide really slippery.
A plywood slope can be covered liquid acrylic, used for bathtub renovation. In addition to excellent glide, this option is also good because you can choose almost any color of the coating! But it should be remembered that scratches will form on it quite quickly, into which dirt will invariably accumulate. This will not affect the functionality of the slide, but appearance the design will be damaged.

Sanded wood escapement

Advice! The joint of plywood sheets looks much more aesthetically pleasing if their edges are sawed off with a jigsaw at an angle of 45º. In this version, the sheets are arranged as if overlapping, and one element “crawls” onto the other.

Metal coating – we care about the safety of the baby

A ramp made of stainless steel or galvanized sheets is a “classic of the genre” when building a children’s slide with your own hands. But this solution also has its drawbacks.

Firstly, in order to cover the entire slide, you need to either overlap it or spend money on a much more expensive sheet of metal of a larger size (sheets 2.5 and 6 m long are available for sale). There is a third option - take time to search construction company, which will agree to “cut off” the required piece of stainless steel from the existing roll.
Secondly, stainless steel (like other metals) gets very hot in the sun. Therefore, it is recommended to place the ramp on the north side in order to reduce the intensity of illumination of the structure. But such a layout is not always possible on the site!
Thirdly, thin steel is very sharp and completely unsafe for a child. A carelessly bent corner can cause serious injury to your baby! Therefore, you need to bend the sheet extremely carefully, firmly fixing it to the base board.

Metal slide with handrails

Advice! Instead of a galvanized sheet to cover the slide, you can take alucobond (an aluminum panel) and attach it to liquid nails. The advantage of this solution is wide color palette material!

Secrets of good metal slide:

The shield under the stainless steel sheet must be perfectly flat, without protrusions or differences. After all, stainless steel is extremely thin and does not compensate for surface imperfections. To do this, it is better to pre-cover the construction boards with fiberboard boards.
It is not recommended to buy a mirror stainless steel, since it heats up much faster and more strongly on sunny days. Much more best option– polished stainless steel.
The sheet should be much wider and longer than the slide itself. After all, for the safety of the child, this covering around the entire perimeter needs to be folded and hidden under some kind of plinths or boards.

Advice! You only need to fasten the sheet of metal along the edges (to the sides and bottom). It is strictly forbidden to make fastenings on the surface of the slide slope!

Flooring slide - cheap and cheerful

Another interesting and inexpensive option– covering the slide with a sheet of linoleum. The advantages of this solution are obvious:

the material is relatively cheap (you can buy scraps, which are sold at half the price);
a perfectly flat surface is not needed under linoleum due to its thickness and softness;
the base under this material does not rot, it protects the wood from moisture and temperature changes (if linoleum is on the sides, in the summer you can make a water slide);
linoleum softens impacts and does not form dangerous sharp corners, chips or splinters, like other coating options.

A linoleum slide is suitable for home

But such a slide also has quite a few disadvantages:

the coating must be changed annually due to its rapid wear;
in very hot weather, linoleum can melt, which is dangerous in terms of getting burns;
the sliding speed on this material is very low;
the design with linoleum does not look very aesthetically pleasing.

For optimal gliding, felt or felt mats can be provided for skating.

Building a wooden slide for a child - step-by-step instructions

Every child's dream is a multifunctional playground, with which you can realize any ideas for games. So, step-by-step instruction for building a children's slide with your own hands.

Proper preparation is the key to successful construction

Preparatory stage:

Take off fertile soil at the construction site and level the ground. Fill the area with sand and let it settle and compact (it is advisable to complete this stage in the fall, and begin building the slide in the spring).
Prepare wooden blanks(stringers, railings, boards for steps and “tunnels”, timber for the base): if necessary, dry everything, cut it to the selected size and carefully sand it, and then soak it with a protective mixture.
Paint the steps, handrails and boards for the “tunnel” with multi-colored enamel in 2 layers with intermediate sanding.
Cut from 12 gauge plywood side elements(for lining the tunnel) and the sides of the slide. Treat the elements with impregnation.

Installation technique for the base structure

Frame installation:

Build a foundation. To do this, you need to make holes with a garden drill, install the reinforcement in them at a level and fill everything with concrete.
Weld the corners to the fittings. Make cuts in the pillars for the base of the slide and mount the timber on the corners, securing everything with self-tapping screws. Connect the pillars to each other with jibs.
Make a staircase: fasten the stringers (it is advisable to add boards on the back side for additional structural rigidity), put steps on them.
Install a launch pad with a ladder leading to it.
Next, make a base for the descent from timber and install it for the ramp curved profile made of metal (25x40).

Bearing structures

The final stage - we finish construction

Do-it-yourself slope and lining of a slide for a playground:

Lay a plywood board on the base for the ramp and make a galvanized iron deck. Fold parts of the sheet along the perimeter and attach them to the bottom metal profile. Cut a gap in the boards forming the platform and also wrap the iron flooring there.
Make a tunnel from boards under the slope. Sew up the side parts with plywood.
Install bumpers on the slide and railings on the stairs.
Mount hipped roof and cover it with pre-treated plywood.
Sew up the side parts of the structure with sheets of plywood and cut holes in them for the climbing slide.

Organization of the slope and lining of the slide

Creative slides – making a child’s dreams come true

Children's imagination is strong and sometimes incomprehensible. In a child's imagination, even the simplest hut can easily turn into a beautiful castle! Therefore, a simple descent with a ladder will be enough for kids to have fun. However, there are many options for how to make a children’s slide with your own hands in an extraordinary and creative way - examples in the photo.

Downhill Tree House

Under the protection of the stone lion

Advice! In order to maintain interest in the slide for a long time, it is advisable to provide additional entertainment elements at the launch site.

Playground– the dream of every child aged 3 to 13 years. And in order for the play area to meet the changing needs of children, all the details need to be thought through at the planning stage. You may need to invite a specialist to do this, who will save you from the need to make a children's slide with your own hands. And then a real play complex will appear on your site - safe and comfortable.

Video: DIY children's slide

We took skis and sleds into our hands -

And off we went for a ride.

On a winter day, in the frost, in the morning

A snowy mountain is waiting for us.

O. Karelin

New Year holidays – best time for winter street fun. Well, isn’t it great to go out with the whole family after breakfast and roll around in the soft snowdrifts, create a fun mess on the hill, scream, laugh, so much so that the neighboring kids come running?! If you don't have an ice slide in your yard, now is the time to build one! And it doesn’t matter where you live - in your own house or in a multi-story building - there will always be a place and grateful children, the main thing is that there is material - snow. A lot of snow.

Benefits for health and soul

Skiing down the mountains in winter is an old Russian pastime that not only children, but also adults, or rather young people, indulged in. Well, or those who considered themselves young. Merchants, peasants and even portly ladies - no one was ashamed of hooting down the hill. Peter I especially loved such fun: he personally participated in the opening of the main slides in the capital and did not disdain to share the fun with the walking people. Moreover, for each new season he demanded a new sled for sledding. They say that in those days there was a tradition - to ride down the mountain in pairs and kiss tightly after each successful descent. It’s no wonder that young people loved this fun, because everyone tried to invite the object of their adoration as a couple.

Sliding down a slide is an unforgettable experience that a person carries throughout his life. After all, on a slide, a child gets to know his body in a new way. When you slide down a slide on your stomach, butt or legs, the “ground disappears from under your feet.” And you need to learn to control yourself in other conditions.

Downhill skiing develops reaction speed and trains the vestibular system. In active games and for adults, a slide is a great way to circulate blood throughout the body, as well as a great opportunity to contact your child.

So, if nature has not deprived your region of rich snow cover this year, then without hesitation, start building an ice slide!

Making a slide

If the decision has been made, then it’s time to start turning it into reality. So what will need to be done?

Place for a slide

First you need to choose the right place for the future slide. Pay attention to safe open areas, which are located far from the road, trees, walls of houses, ponds, bushes, etc. The descent must be free and nothing should hinder it.

If there is a natural slope nearby, this will make your job easier. If not, you will have to create it yourself. To do this, invite your neighbors who also have children to help. This will speed up the process and make your work easier. Well, it will be more fun.

To create an artificial slope, start by piling snow into one large pile. If the snow is heavy, then throwing it will, of course, be more difficult, but this will make the process of forming a slide easier.

Slope formation

Have you added enough snow? Climb onto the pile and begin to trample and crush it, gradually forming a path down. If the snow is loose, then thoroughly water the snow preparation cold water from a watering can. It is important that the water spreads evenly, so it is better to take a watering can with a spray nozzle.

Now you can add snow again, slowly changing the contour of the slide to the one you need. Try to make the path for sliding long enough - at least 5 meters. At the top of the slide, trample a wide platform, and with reverse side arrange a descent with a steepness of 55-65 degrees. This is a preparation for future steps. And the slope on which children (and not only) will ride should be 35-45 degrees. The steeper the angle, the sharper the sensation, but to make such a slide, you will have to throw a very large pile. Therefore, try to form a gentle, smooth descent.

Sides and steps

Be sure to add sides to the slide. To do this you need to "cut" upper layer snow, leaving a border around the edges.

Form the steps. Start cutting the snow from top to bottom. Flatten the snow with a shovel, then compact it with your feet. Optimal width one step – 45 cm. Do not water the steps with water! Otherwise, it will be impossible to climb them. To ensure safe lifting, you need to make sides, for example, from old wooden slats.

Fill

If you want to make a high-quality slide, then leave your structure for a day so that the snow settles. And even better - for 2 days.

When the time required for the snow to shrink has passed, return to the slide with water. If it is possible to remove the hose, then it is better to do so. If you are placing a slide in the yard apartment building, again contact your neighbors whose window is closer. I think they will not refuse and will allow you to extend the hose.

Prepare a shovel. Water the top of the slide with water and trim the surface. During pouring, pits may appear. They must be compacted with snow until they are equal to the general surface of the slide.

Fill the horizontal path with an even layer of water. The longer it is, the greater the distance future riders will glide.

It is important to form smooth surface immediately, as soon as you douse the snow with water. Otherwise, it will “grab” and you will have to cut off the ice and smooth out the unevenness.

Roll the slide several times at short intervals so that the ice has time to bind the surface of the slope.

Area

Design the area where the skaters will land. Free it from stones, branches, snags. Throw in a thick layer of snow and trample it down. And, of course, fill the path that continues down the hill, but we have already talked about this.

Well, now the slide is ready to “bring happiness” to you and your children. Just sprinkle sand or small pebbles on the steps before you climb them. Spend more time with your kids and enjoy your ride!