Good afternoon Every person in life is faced with the question of choosing a high-quality plastic window. If you encounter such a problem, I suggest reading this article.
My many years of experience in working with plastic windows have given me a lot of knowledge, which I will be happy to share with you.
The plastic window is made of a multi-chamber system, which not only retains heat, but also protects the house from moisture, dust, wind and noise. To select quality windows first important role has a manufacturer. It is better to choose a window manufacturer based on reviews from clients and friends who installed windows. The most popular manufacturers: Rehau, KBE, Veka, Salamander, Proplex.
The material from which the profile, glass unit and fittings are made also plays an important role.
Reviews and advice from our clients on how to choose high-quality and the best plastic windows
If you decide to install windows, then you first need to decide which plastic windows to choose. It is important to know what to pay special attention to in order to avoid many problems. We provide below reviews about plastic windows left by our customers. Perhaps they will help you understand the question of how to choose plastic windows.
Anatoly, 45 years old, Moscow:
Pay attention to the type of profile used. The profile can be imported or domestic. Many experts claim that imported ones are of better quality - and this is true. Sometimes, in order to produce an inexpensive profile, they use recycled materials. Therefore, be sure to check this point with consultants. Carefully study the cut that is shown to you as an example - its thickness should be 1.5 mm, it should be made of galvanized steel. Only such a profile will be reliable and of high quality.
Try to carefully examine the included accessories. High-quality fittings are made in Germany. The simplicity and convenience of managing your plastic window depends on it.
The number of air chambers inside the window must be at least three.
A company producing plastic windows must have samples of work and sections of profiles. Production and installation must be certified. Never hesitate to ask for supporting documents and samples. This will save you a lot of worries later.
The right plastic windows will serve you reliably. I would like to note that only professionals work in the Window Repair company. You can trust them with your home without a doubt!”
Stanislav, 37 years old, Moscow region:
“...I would like to advise all those who want to purchase the best plastic windows to pay attention to the quality of double-glazed windows.
A high-quality double-glazed window should be:
Thickness of at least 32 mm;
There must be at least two air chambers in a double-glazed window;
Must have a heat-reflecting coating;
The glass type should be M1-polished;
When I needed to change the window in the kitchen in my apartment, I turned to the Window Repair company. The double-glazed windows turned out to be of really high quality - they are not afraid of any wind or frost. Guys, thank you!”
Svetlana, 30 years old, Moscow:
“...Plastic windows – which ones are better? In my opinion, brands such as Rehau, Veka, KBE should be trusted. Plastic windows are really high quality - reliable thermal insulation, ease of operation, anti-burglary system. The windows look solid, there is no noise from the street. I installed Rehau plastic windows in my apartment, and Veka ones at my parents’. With such windows, cold winters are not scary, and in summer it is quite comfortable with the help of mosquito nets. Thanks to the staff of the Window Repair company for their advice and assistance with installation!”
Contact our company and purchase high-quality plastic windows for yourself that will help you look at the world around you in a new way!
source: http://www.okna-plastiq.ru/
When choosing which windows to buy for your home or office, each of you is looking for the best solution for maintaining warmth and comfort, trying to find the optimal combination of price and quality. Manufacturer of high quality plastic profile recommends paying attention to following parameters PVC windows:
Profile
There are several profile quality classes, determined by the thickness of the outer wall. A thinner profile may cost less, but it cannot always ensure the preservation of the consumer properties of the window - heat and sound insulation, geometric stability, and durability. The best companies work with class A profile, which guarantees quality.
Accessories and components
Window good quality should open and close without problems at any time of the year, protect from dust and street sounds. Cheap seals, handles, rotary fittings and fastening elements not only reduce the cost of the window, but also reduce its quality. After all, with bad components, even a first-class profile will not save you.
Glass
Pay attention to what kind of glass the manufacturer uses. Nice windows have double-glazed windows made of polished glass, often with sun protection coating. Cheap Chinese glass can later upset you with cloudy stains, scratches and even cracks in severe frosts.
Installation
No matter what the best plastic windows are, incorrect installation will ruin everything. We recommend using window installation services offered by the manufacturers themselves. Involving outside people in the installation or installing it yourself will deprive you of the right to warranty service.
Price
The final cost of the window with installation depends on all the previous points. You can find and install a window cheaper, but the total savings can be a maximum of 20%, and the service life of the window will be unpredictable. Just find out how much maintenance and repairs cost, and consider whether it's worth installing windows that may need to be repaired.
From the experience of cooperation with window manufacturers, we confirm that the most common problems in window operation are caused by poor-quality fittings and improper installation. Better to spend a little more money and install a window highest quality rather than regretting the money spent and getting ready for repairs again.
source: http://www.veka.ru/
Rating plastic windows- this is one of those criteria by which it would be quite simple to determine the best plastic windows. However, you will not find such an objective and comprehensive rating. This is due to a number of reasons.
Firstly, the rating of plastic windows cannot be objective, since the assessment will always be based on a subjective judgment. Expert or popular opinion is always just the opinion of subjects based on some criteria, the set of which is very different.
Secondly, the rating of windows cannot provide a comprehensive assessment, because window products are a technically complex product with versatile and multifaceted characteristics. It is not at all necessary that the best window should be made from the thickest (widest) profile, and the warmest double-glazed window is not always necessary when glazing.
Thirdly, the rating of plastic window brands cannot guarantee the quality of PVC windows in operation. Even the best rated windows can be damaged by poor installation or perform their functions improperly due to manufacturing defects.
Which plastic windows are better: Veka, Rehau, KBE?
As in any question: the fish looks where it is deeper, and the person looks where it is better. In this regard, it is always more interesting for an ordinary consumer to buy a higher quality product at favorable price. Therefore, having an idea of which product from the presented line has the best characteristics, it is always easier to find it at the best price.
When choosing windows that are popular today based on Rehau, Veka, KBE, etc. profiles, a person makes conscious choice in favor of a well-known and reliable brand. However, windows based on the technically best profile have excellent potential, but do not guarantee excellent performance.
Indeed, in addition to the profile itself, the window contains fittings, double-glazed windows, the quality of work of the window manufacturing company and the installers of the installing company. Thus, a window from a Rehau brand profile will not necessarily be better than KBE or Veka windows.
Why is there still no better window company or better plastic window?
This question plagues window buyers and sellers, journalists from popular magazines and editors. The question of choosing the best PVC windows is increasingly being asked on construction forums and in search engines. But an answer that is definitely fair and correct has not been found. Why?
One of the reasons is the complexity of the design itself, as we described earlier, which is big number elements. Both expensive and high-quality components and less expensive, less reliable components can be used here.
Add here the human factor, which is present in any assembly and manufacturing process using the labor of a living person. The result is a black box with a large number of unknowns at the input and a product with mysterious properties at the output.
Another component that also takes place when determining quality installed window is the installation process. It’s not at all difficult to imagine a situation where an otherwise perfectly manufactured window will be irrevocably damaged by an incompetent installer.
Note!
It was complaints about such an installation that one heard during the process of “sanitation” of residential buildings. The installation of plastic windows was entrusted to non-professionals, and, as a result, windows that were initially of good quality turned into a non-functional and low-quality element of the window opening in the end.
If, nevertheless, to determine the best window, then for this you need to compare and select products according to the following rules or in one of the following ways: by price, by quality, by the optimal price-quality ratio.
The methodology for an independent rating of plastic windows, which gives an assessment that is interesting to the buyer, as it seems, should be based on absolute values that are directly related to the window design. The quality of service (delivery, installation) can be assessed not in relation to the window, but to a specific window company.
Summary:
- The rating must include products – plastic windows and PVC doors – of the same “weight” category. Having similar, if not identical, technical characteristics. Windows of different segments must be compared in their subgroups.
- The rating should evaluate the same parameters according to a pre-agreed list - the most significant characteristics from the point of view of the window consumer.
- The rating must be compiled by an independent group of experts or formed public opinion– a representative sample from the totality of all possible window consumers.
Only by working in this way will the results obtained have at least some meaning, and the rating of plastic windows itself will be in demand, useful and relevant when choosing windows and purchasing them.
source: http://pvc-profile.ru/
Which plastic windows are best to install?
At first glance, the design of plastic windows is very simple - glass, frame, handles. However, windows from different manufacturers differ from each other both in quality and in price. When choosing windows from a well-known brand, the buyer pays not for a big name, but for reliability and durability. Let's take a closer look at all the elements that make up the windows and find out which plastic windows are better.
Which plastic windows are best installed in an apartment or house? Good plastic windows don’t just cover the window opening – they perform many functions.
The main one in our latitudes is, of course, heat conservation. Owners poor quality windows They know well what a problem they can become in winter. Cold and drafts are inevitable for those who decided to save money and install the most cheap model handicraft production.
But the best plastic windows provide ideal thermal insulation - for example, when it is -5 o C outside, the temperature near the inner glass never drops below +20 o C. In summer, windows can protect the apartment from heat and too bright sun - for rooms facing south, You can choose windows with tinted double-glazed windows and protection against infrared radiation.
An important function of plastic windows is sound insulation, this is especially true for those who live near a busy road. Sound insulation depends on the thickness of the glass and the distance between them.
Windows also protect the house from illegal entry.
Helpful advice!
Well-known manufacturers are constantly improving the burglary resistance of windows, and many models are not at all easy to open from the outside. And, of course, you shouldn’t forget about such little things as protection from insects using mosquito net and from light using blinds.
There are many companies producing plastic windows - about 10-15 largest producers(KBE, Rehau, Veka, Salamander, Schuko, Kommerling, Proplex, Deceuninck, Montblanc, LG Chem and others) and several dozen smaller ones. Each company offers a number of lines of windows - from affordable prices to luxury options.
It’s not easy to understand so many offers; it’s even harder to say which plastic window companies are better. When choosing a window, you should not start from the brand or, especially, the price, but from your own needs. Here's what to look for when choosing a window:
Material and profile uniformity
Typically, profiles for plastic windows are made of PVC reinforced with metal. PVC is resistant to deformation, harmless to humans and the environment, and is not afraid of temperature changes, moisture, oils, acids and solvents. PVC can be used to make not only standard square and rectangular windows, but also structures of any shape - round and semicircular, triangular, etc.
High-quality PVC is of uniform color, its surface is smooth, without grain, unevenness or streaks, and it is absolutely odorless.
Profile thickness
A profile is a structure with internal partitions. The thickness of the external and internal walls of the profile is standardized. Depending on it, the profile is assigned to one of three classes - A, B or C.
- Class A - external walls with a thickness of 2.8 mm, internal walls - from 2.5 mm. Windows made of this profile provide good heat and sound insulation; they are installed in residential premises.
- Class B - external walls with a thickness of 2.5 mm, internal walls - from 2.0 mm. Class B profile windows are recommended for installation in non-residential premises. They are less durable, retain heat less well and do not provide sufficient noise protection.
- Class C – all other profiles that do not meet standards A and B. There are no strict requirements for a class C profile.
Obviously, the thicker the profile, the stronger and better it is. Most modern window profiles have an external wall thickness of 3 mm or more.
Number of air chambers
Inside the profile there are several cavities - air chambers that provide protection from cold and loud sounds from the street. The minimum number of cameras in a profile is 3, the maximum is 8. The most common are 3- and 5-chamber profiles. A 3-chamber one is suitable for windows facing a quiet courtyard or to the south; 5-chamber ones are best chosen for windows facing the road or oriented to the north.
A double-glazed window is a block of glass that is hermetically connected to each other. The space between the two sheets of glass is the chamber. Many people confuse cameras in the profile and cameras in the glass unit, but these are different concepts.
The most common double-glazed window is a two-chamber one, consisting of three glasses and two chambers between them. However, there are also three- and four-chamber double-glazed windows for particularly cold climates. Single-chamber packages are only suitable for glazing loggias, balconies or gazebos.
The quality of glass is no less important than the number of cameras in a double-glazed window. Regular glass- the cheapest, but today many people choose glass with additional properties. For example, glass with a coating that reflects infrared rays is as transparent as ordinary glass, but at the same time retains heat in winter and pleasant coolness in summer.
Note!
There are fireproof glasses that do not break even when exposed to extremely high temperatures, and glass laminated with triplex - such a window is almost impossible to break, but even if someone succeeds, there will be no sharp fragments when broken.
Seal quality
Seals are needed to ensure that the window closes tightly, as well as to ensure the tightness of the double-glazed windows. Seals are made of rubber, rubber-plastic, silicone or natural rubber. The most inexpensive (and short-lived) option is rubber; more expensive windows have seals made of rubber and silicone. They do not deform even after long use; temperature changes also do not affect their quality.
Profile width
The profile width must be at least 50 mm. Most of the best plastic windows have a width of 58-70 mm or more. The thickness mainly depends on the number of glasses - the more there are, the “warmer” and wider the window. In most cases, a width of 58-70 mm is enough to ensure warmth and silence in the house; wider profiles are in demand in harsh northern climates or in very noisy areas.
Accessories
A plastic window is a rather heavy structure, and besides, it is constantly exposed to loads - the windows are opened and closed every day. Therefore, the fittings for such windows must be especially reliable. Most often, owners of cheap, low-quality windows complain about the fittings - the handles become loose and fail, or even fall off altogether, window hinges jam and warp.
To avoid such troubles, buy windows from reputable manufacturers who not only strictly control the quality of fittings, but also constantly develop new, more convenient and durable systems. Adjustable fittings are better than non-adjustable ones - they allow you to open the window exactly as much as required, and special stoppers will prevent a draft from slamming the window shut.
Anti-burglary systems will prevent intruders from entering the house (this is especially true for apartments on the ground floor, country houses and private houses). To worthy producers window fittings include Roto, Aubi, Winkhaus, Siegenia.
The best manufacturers of plastic windows and prices
|
Manufacturer |
Advantages |
Flaws |
Cost (for double-glazed window 1400x1600 mm) |
|
Durability, high levels of heat and noise insulation, environmentally friendly plastic. KBE windows are sealed and can withstand temperature changes from +50 o C to -50 o C. A well-thought-out ventilation system does not allow the windows to fog up. |
Relatively high price. The plastic may yellow slightly over time. |
From 13,000 rubles |
|
|
Durability, good sound and heat insulation, wide range of models, environmental Safety, frost resistance. |
The height of the doors is small and the cost is somewhat higher compared to other brands. |
From 13,500 rubles |
|
|
Low cost, durability, adaptability to Russian conditions, plastic, characterized by durability and whiteness. |
The design of some models is obsolete. No international certification. |
From 11,000 rubles |
|
|
Durability, high noise and heat insulation, tightness, wide range of models. Rubber seal that is not afraid of low temperatures. |
Relatively high price. |
From 12,500 rubles |
|
|
Low cost, very good design, adaptability to Russian conditions, wide choose models, strength, full control over the production cycle. |
Lack of a quality management system certificate, weak fittings, unpleasant chemical odor from the seal. |
From 10,000 rubles |
|
|
High quality, good dark and sound insulation characteristics, laconic design, high-quality glossy plastic, good value for money. |
More common on Far East than in the central part of Russia. The consumer properties of windows from this profile have not been fully studied, due to the relatively recent introduction to the market in the central part of Russia. |
From 12,000 rubles |
|
|
Very rigid structure, resistant to deformation, good design, reliability, good tightness, wide range of models. |
Heavy profile, not very suitable for doors, built-in blinds that break after a few years. |
From 12,000 rubles |
As you can see from this table, each company's products have their pros and cons, so the choice depends on your preferences. It’s even better to seek advice from specialists from a company that installs plastic windows - they are aware of all the strengths and weaknesses of each brand and the intricacies of operation.
Replacing old windows with new ones is a labor-intensive and complex renovation stage. But if you make the right choice, you can enjoy warmth, good sound insulation, trouble-free fittings and other delights of a high-quality plastic profile with sealed double-glazed windows for 20 years. And for this you need to know which plastic windows are better, which profile and which double-glazed window to choose. We also became interested in this issue and decided to look into it. To do this, we collected analytics and studied specifications, looked at the certificates, read the reviews and made the conclusions that are outlined in this review. We offer our rating 10 the best manufacturers plastic windows.
10 best manufacturers of plastic windows. Opinion of independent experts
The huge market for plastic windows offers products from several dozen manufacturers. In conditions of fierce competition, each of them tries to stand out and offer the consumer quality products at affordable prices and attractive conditions (for example, free installation, warranty). And since all manufacturers have several lines in different price category, then it would be unfair to unconditionally give the palm to someone, and leave someone as an outsider. Therefore, we have arranged the 10 best manufacturers of plastic windows in no particular order.
| Company name | Country of origin (location of headquarters), representatives | Year of foundation |
| The headquarters is located in Germany. But Veka AG has partners all over the world. For example, in Russia there is a subsidiary company VEKA RUS and many representatives who also operate the Veka brand. | ||
| The company was founded in Germany, and KBE products are manufactured in different countries. There are 2 factories in Russia: in Khabarovsk and Voskresensk. | ||
| Russian company, plant located in Bryansk. | ||
| Russia. Has its own training center, production capacity, production and purchasing union. Winner of numerous awards, winner of awards. | ||
| Founded in Germany. Currently it has more than 40 factories in different countries. Products for the Russian market are manufactured at factories in Yekaterinburg, Nizhny Novgorod, Samara, and Rostov-on-Don. | ||
| Russia. It was the first domestic manufacturer of plastic windows to build a plant and begin to develop own technologies. Has the “Golden Quality Mark” in the “Russian Brand” nomination. | ||
| South Korea. The company specializes in different directions, one of which is polymers and the production of plastic windows. | ||
| Trademark company GC "ASTEK-MT", Russia. The profile is made from imported raw materials. | ||
| Salamander Industrie-Produkte GmbH, Germany. Products for the Russian market are produced primarily by domestic partner manufacturers. | 1973 (window production) |
|
| The brand was founded by STL Extrusion Technology Limited in collaboration with A+G Extrusion. The trademark is registered in Russia. Production is located in Elektrostal and Zelenogorsk. |
Which profile is better: Veka or Rehau? Brusbox or KBE Proplex or LG?
The best plastic windows 2018: profile quality rating
We studied the opinions of authoritative experts, customer reviews, sales statistics and, based on this data, compiled a profile quality rating. In the table we have presented the most important characteristics that consumers and specialists in the production of plastic windows pay attention to.
| Name | Features and Benefits |
| It uses natural rubber for the production of seals, which does not change its properties for a long time, does not dry out and does not become hard. Another advantage is the unique technology for the production of PVC, which does not turn yellow. |
|
| Manufactured using a unique technology without the addition of lead. Huge selection of configurations and colors. |
|
| There is a profile of 60 mm (4 cameras) and 70 mm (6 cameras). There are our own technologies, for example, sliding system GLIDE. |
|
| An environmentally friendly profile that is superior in strength and durability to windows made of natural wood. |
|
| The undisputed market leader with a billion-dollar turnover. Pays great attention to environmental friendliness and energy efficiency, develops new technologies, and improves window design. Rehau profiles are truly commendable. |
|
| Frost-resistant seal, thermal protection chambers, extra-strong lamination. Another advantage is that the profile can be used as a secondary raw material, that is, the company cares about the environment. |
|
| The company's ideology is based on the Six Sigma management system. LG Chem windows can be installed in buildings of any number of storeys at a height of more than 100 meters. |
|
| An ergonomic and durable profile that is a worthy competitor to European and Asian plastic windows. |
|
| Large product line. Design 2D – the thickness of the chambers has been increased to improve heat-saving characteristics. Streamline is a 5-chamber profile resistant to aggressive environments and ultraviolet radiation. blueEvolution – 6-chamber profile with triple seal. |
|
| The profile is manufactured on Austrian equipment from European and American raw materials. Large range of colors good thermal insulation, perfect tightness. |
Profile for PVC windows: characteristics and types
The profile is a metal-reinforced plastic window frame, into which a sealed . The profile itself is not solid, but hollow inside. It consists of several isolated chambers filled with air. Why is such a design needed? The point is that cameras are getting better. thermal insulation properties. Therefore, manufacturers proudly display their window profiles in cross-section.
Profile uniformity
PVC is a thermoplastic produced by mixtures of polyvinyl chloride with various modifiers, stabilizers, pigments, etc. If the manufacturer follows the technology and uses high-quality raw materials, the surface of the profile is uniform and uniform, without streaks, inclusions, bumps or scratches.
Profile width
The minimum permissible installation width of the profile is 50 mm, the standard is 58 mm. Also on the market you can find a profile with a width of 70-90 mm. This is a more expensive multi-chamber profile designed for difficult climatic conditions and buildings located in very noisy areas, for example, on the territory of an enterprise.
Number of air chambers
The gold standard and quite a budget option is a three-chamber profile with a thickness of 58 mm. A profile with a thickness of 70 mm usually has 3-5 chambers, and a 90 mm profile has 6 chambers. Does the quality of windows depend on the number of cameras? This is not the most important characteristic, unless you live in harsh northern conditions, where in winter the thermometer drops to an alarming -50 ° C.
Number of double glazed windows
The number of double-glazed windows characterizes the thickness of the glass itself. The simplest and cheapest option is. This means that in such a frame there are only 2 glasses installed, between which there is an air chamber. Such windows are suitable for a summer cottage or balcony without insulation. In a double-glazed window there will be 3 glasses and two chambers between them. This is quite enough for residential and office premises in central Russia. Windows with 3-chamber double-glazed windows are very heavy, and special practical value there is no such “pie”. Therefore they are not popular.
Profile class (thickness)
Class is a characteristic of the thickness of the profile, or more precisely, its plastic walls. The wall thickness can be determined by class as follows:
| Profile class | Wall thickness | Description |
|
| S outer ≥ 2.8 mm S inner ≥ 2.5 mm | High-quality thick-walled profile, which is intended for installation in residential premises. |
||
| S outer ≥ 2.5 mm S inner ≥ 2.0 mm | Object profile from which cheap ones are made non-residential premises. It has low heat and noise insulation rates. |
||
| Any profile that does not meet class A and B standards A professional, not some do-it-yourselfer without experience and knowledge. Therefore, it is very important to contact a company that will deliver and install the windows and give a guarantee, and in the event of some force majeure, also fix the problems (or replace the windows altogether). CertificatesThere are a lot of different domestic and international quality and compliance certificates: GOST, SNiP, GOST R ISO, ISO, RAL, etc. It makes no sense to thoroughly understand the nuances of each. But the more certificates a manufacturer has, the better. For example, not all Russian manufacturers (including partners of European companies) have a RAL certificate. In general, VEKA stands out here - the company also received it for factories located in Russia. If the profile is wider, is it more reliable and warmer?The installation width of the profile is not the main criterion. We can talk about reliability and heat saving only if the profile belongs to class A, it has a sealed, soft and frost-resistant seal in the windows, and high-quality fittings. Therefore, in most of the territory of Russia, a profile with a thickness of 90 mm is, let’s say, an exclusive indulgence that will simply please the vanity of the maximalist owner. We recommend contacting a representative of any of the manufacturers from our rating, consulting and ordering services. You must select suitable plastic windows, install them and give them a guarantee. And you can find such a representative on our website “Stroyportal”. Entrust a difficult task to the pros and rely on their experience. This will truly be the most rational solution and a guarantee of quality. |
Before you start planning an apartment renovation, it is necessary, in addition to future architectural features premises being renovated, also consider options for glazing the window opening. Most Russian families prefer to stop their choice on plastic windows, since they have a number of advantages that, along with an affordable price, make their installation in the home the best solution. To such positive qualities can be attributed high level heat and sound insulation, excellent appearance, long service life. These are not all the advantages that modern PVC windows have.
With all this, due to the lack of information provided by managers of companies selling plastic windows, when choosing a future light-transmitting structure, the question often arises: how to navigate the sea of proposals and, from the many presented models, choose the one that would be optimally suited both in cost and by functionality?
To do this, you need to consider several of the most common solutions and settle on the best. We hope you have already read the article about, but in this one we will present the best of them. In a sense, you will get a kind of overview of the existing rating of plastic windows, after reading which and making certain conclusions for yourself, you can safely go to a company where you can buy plastic windows.
What to consider when purchasing.
If we briefly summarize the information given in that article, we can highlight the following: the main components of a modern light-transmitting block are double glazing And metal-plastic profile.
Important! Decide in advance on the requirements that the new window must meet. For example, it is not advisable to install warm windows in the kitchen, where it is constantly comfortable temperature through constant cooking. Also, warm windows will be unnecessary in a room with access to a well-insulated balcony.
In turn, for a metal-plastic profile the main characteristic is its chamberness. Today modern industry is ready to offer the end buyer a choice of several types of double-glazed windows, differing, first of all, in the properties included in them by the manufacturer and their purpose.
Rating of companies engaged in the production of plastic windows.
Before proceeding with a detailed product analysis famous brands, the following clarification must be made: top position in the rating does not mean that the presented brand is better than others - it's simple listing the best companies in the field of production of light-transmitting plastic products.
Rehau. Brand of a German manufacturer. It so happened that standard of quality It is German designs that are recognized in the window ratings. They are distinguished by a beautiful appearance, an excellent level of heat and sound insulation, as well as a fairly wide selection of possible profile colors.
Rehau BLITZ-Design. The best option for a limited budget. The three-chamber double-glazed window model is good combination indicators for heat, sound insulation and design. All this can be purchased at an attractive price. An excellent choice for those who want to buy a plastic window made from high-quality materials for little money. The possibilities of the profile can please fans of non-standard plastic windows - due to the properties inherent in metal-plastic, the task of glazing an opening of any shape is now quite feasible. For this purpose, triangular, oval, trapezoidal and other window shapes are produced. In addition, the color of the profile can be matched to the tone of the interior - to do this, you just need to order products with a film applied to the profile (the so-called film is used). It is possible to order a version of the film made to match the color of the wood.
Rehau THERMO-DESIGN. Due to the fact that this model has a built-in five-chamber double-glazed window, such windows are endowed with significantly better characteristics than the previous version of the light-transmitting design. This fact has a positive effect on the amount of heat retained in the room - more of it remains. The model is recommended for installation for residents of areas where it is cold most of the year. In addition, the colors of window lamination in this line are more varied.
Rehau EURO-DESIGN. The most popular model on the Russian market. Has high performance. Currently, production of this profile is suspended. The characteristics are similar to Rehau BLITZ-Design.
Rehau BASIC-DESIGN. The solution is equipped with a three-chamber double-glazed window and has standard characteristics. Due to this fact, its cost remains at an acceptable level for every potential buyer.
Rehau BRILLIANT-DESIGN. Top solution from Rehau. The design is a five-chamber double-glazed window with the highest possible characteristics among all window models of this German company. The technology used, reinforced with a thermal insert, makes it possible to increase the thermal insulation properties of the structure by new level. This series is distinguished by an increased service life. According to the manufacturer, it is at least 50 years old.
Another popular German brand of PVC windows in our country. Distinctive feature plastic profile is its structure. It comes in two versions: matte and glossy. Moreover, regardless of the structure used, the profile, under the influence sun rays, does not turn yellow and does not fade. Veka windows are environmentally friendly, and the natural rubber seal used does not damage even in the bitterest frosts.
Veka Euroline. A model with a three-chamber profile, made in smooth outlines and equipped with a choice of: single-chamber or double-glazed windows, or just one glass. Mainly used as standard window installed at the construction stage of buildings. Therefore, there is no need to talk about any additional functions and characteristics besides the standard ones. Has energy efficiency class “A”.
Veka Softline. It includes a five-chamber profile with two or three-chamber double-glazed windows, which is responsible for a good level of thermal insulation and noise insulation in the room. The two-layer sealing system between the frame and the glass unit makes this model ideal for combating window drafts. It is this line that is especially popular among Russian buyers. This was mainly possible due to the optimal price/quality ratio. Has energy efficiency class “A+”.
Veka Alphaline. The crown of all the company's lines. The model has a six-chamber (!) premium class profile coupled with a two-chamber double-glazed window. Provides excellent protection from cold and possible drafts. The highest characteristics embedded in it affect its cost - the price of “Veka” windows in this line is the highest. Overall #1. Has energy efficiency class “A++”.
Any presented series of Veka windows includes, designed for 50,000 opening/closing cycles, two sealing contours (three colors to choose from), the highest 4th class of corrosion resistance, 43 possible profile colors and guarantee period at 5 years old.
The German brand KBE is popular in Russia no less than the others listed above. Let us present the advantages and characteristics of three models of different price categories.
KBE Etalon. For little money it provides acceptable heat retention in the room. The simplest option presented model range KBE. It is a three-chamber “standard” class profile coupled with a 32 mm double-glazed window. Possible glass thickness is 6 or 8 mm.
The seal can be: white, black or light gray. Window reinforcement used: steel.
KBE Expert. Windows of this series perfectly retain heat in winter and coolness in summer. This is evidenced by a five-chamber profile of the “standard” class and a double-glazed window with a thickness of 32-40 mm. Possible glass thickness is 6 or 8 mm. Designed for installation in both panel and wooden houses. Seal contour: black or light grey. Window reinforcement: steel extra.
KBE Select. This model is a new level in home insulation from the KBE window manufacturer. The five-chamber premium profile successfully copes with heat retention, and the 24-42 mm double-glazed window perfectly retains heat in winter and coolness in summer. Possible glass thickness is 6 or 8 mm. Seal outline: light gray only. Window reinforcement used: extra steel.
KBE 88. The pinnacle of perfection from KBE. Recommended for installation in any residential and. The combination of a 24-52 mm double-glazed window, equipped with a thermal package, and a six-chamber (!) premium class profile perfectly retains heat even in the coldest season. Seal contour: black or light grey. Possible glass thickness is only 8 mm. Window reinforcement: steel extra. Today, the KBE 88 series is the best among all lines of this brand.
Summing up all of the above, we can safely say: you can and should choose PVC windows, fortunately interesting options on the Russian market building materials Quite a lot is presented today. We hope that the rating of the top models of plastic windows from our website will help you navigate the rich variety of products available for purchase in the relevant companies located in the vast expanses of our vast country.
Reading time: 7 min.
Today it is rare to see old wooden windows, almost everywhere there are plastic windows. They have a very long service life, excellent sound insulation, they are easy to maintain, and with our continental climate - warm summers and cold winters, their thermal insulation is simply a saving anchor! So which companies produce the best plastic windows? To cope with this issue, we will be helped by the rating of the best plastic windows, based on reviews from users of the Irecommend and Otzovik resources. The rating is based on factors such as durability, level of service, price and popularity of the product.
A double-leaf window will cost you from 7,433 rubles. Panorama has been working in this field for more than two decades; it is one of the very first window manufacturers. Over all these years, this company from St. Petersburg has glazed more than one and a half million square meters. The only drawback of this company is weak advertising; services are provided so unobtrusively that it is only with great difficulty that you can find answers to your questions.
A window with two sashes will cost you 14 thousand rubles. SOK stands for “Samara Window Constructions”, the company dates back to 1999. Without having its own production, the company sells profiles that are cast at the Profine concern in Germany. The profiles of the German company Profine are considered one of the best in the world; they have a lot of positive ratings. They are distinguished by their strength and durability. The only negative is that the profile may turn yellow, possibly due to non-compliance with storage rules in warehouses.
The price of the simplest double-leaf window is RUB 9,490. The Deceuninck Group, from Belgium, is one of the top three manufacturers of PVC windows in the world. The Russian branch released new system profiles “Favorite Space”, which received the “Time of Innovation” award for its high level of energy efficiency. The windows are certified according to ISO standards. The disadvantages include the poor quality of budget options, compared to similar products from other companies.
The price for a double-leaf window starts from 8,503 rubles. Profiles are manufactured in the Moscow region using Austrian technologies, and raw materials are supplied from the United States and Europe. Proplex windows are considered budget option, but they are so good that they will withstand even the Siberian frost. These PVC windows are of very good quality - they do not crack or turn yellow even after a long time. The only negative is the fittings - users mostly speak negatively about them.
A double-leaf window will cost you at least 8,503 rubles. This company produces windows in a full cycle - from the manufacture of profiles to self-installation. The company's branches are very conveniently located; Kaleva is located in more than 80 cities of the Russian Federation. The disadvantage of the company is that you may or may not be lucky, depending on the specific city in which you order windows; the branches are very different from each other. At the same time, the central office is not responsible for them - you will have to deal with unscrupulous dealers yourself.
The cost of turnkey work starts from 8,750 rubles. This company has the largest plant for the production of PVC profiles in the Russian Federation, the work of which is monitored by specialists from Austria. The company started operating in 2001. The company independently developed and implemented many types of profiles, from the standard with three to the latest with five chambers. Today the company creates a profile for the client, taking into account any wishes and requirements. Disadvantages include yellowing of the profile and poor quality of fittings.
A standard double-leaf window will cost from RUB 21,650. The company produces its own products and works with components from Germany. Profiles of the highest quality are made according to individual orders, for example, no matter how absurd it may sound, with protection from falling meteorites (customers from Chelyabinsk would appreciate this). Traditional systems with a well-thought-out design, robust and durable - this is all that can be said about Salamander. This company is one of the best in the production of windows, in terms of quality. The only negative is the price is too high.
A double-leaf window will cost you 8,578 rubles. This is one of the most popular companies in the Russian Federation, which has been trusted for many years. The profiles of this company are liked by both users and experts in the field of profile design. The company’s specialists were developing GOST standards for windows in the late nineties, so KVE windows are the standard among PVC windows. Everyone who set up a profile for this company was satisfied with the result. This manufacturer is the best in terms of price to quality ratio. True, a lot depends on the supplier and installers.
REHAU
A regular double-leaf window will cost you 6,660 rubles. REHAU is a company from Germany that has been operating since 1969. Over the years of its work, the company has developed many profiles - from classics (three chambers) to ultra-modern six-chamber profiles. Windows are really high quality and durable, but the supplier and installer are unpredictable factors. And besides, who wants to overpay for an advertised brand?
VEKA
A double-leaf window will cost you 11,170 rubles. The VEKA company is considered one of the best; it has been operating on the market for more than 45 years. This brand has its branches not only in Europe, but also in the United States, the Asian region and is opening more and more new branches. 1999 was marked for Russia with the construction of the first VEKA plant on its territory. The company produces profiles only of the highest quality. Pleasant appearance, variety of profiles, high threshold of temperature resistance, quality - all these factors attract buyers. But, as always, a lot depends on the fittings and installers.